| /* |
| * Broadcom Northstar USB 3.0 PHY Driver |
| * |
| * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> |
| * |
| * All magic values used for initialization (and related comments) were obtained |
| * from Broadcom's SDK: |
| * Copyright (c) Broadcom Corp, 2012 |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/bcma/bcma.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/phy/phy.h> |
| #include <linux/slab.h> |
| |
| #define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */ |
| |
| enum bcm_ns_family { |
| BCM_NS_UNKNOWN, |
| BCM_NS_AX, |
| BCM_NS_BX, |
| }; |
| |
| struct bcm_ns_usb3 { |
| struct device *dev; |
| enum bcm_ns_family family; |
| void __iomem *dmp; |
| void __iomem *ccb_mii; |
| struct phy *phy; |
| }; |
| |
| static const struct of_device_id bcm_ns_usb3_id_table[] = { |
| { |
| .compatible = "brcm,ns-ax-usb3-phy", |
| .data = (int *)BCM_NS_AX, |
| }, |
| { |
| .compatible = "brcm,ns-bx-usb3-phy", |
| .data = (int *)BCM_NS_BX, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table); |
| |
| static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr, |
| u32 mask, u32 value, unsigned long timeout) |
| { |
| unsigned long deadline = jiffies + timeout; |
| u32 val; |
| |
| do { |
| val = readl(addr); |
| if ((val & mask) == value) |
| return 0; |
| cpu_relax(); |
| udelay(10); |
| } while (!time_after_eq(jiffies, deadline)); |
| |
| dev_err(usb3->dev, "Timeout waiting for register %p\n", addr); |
| |
| return -EBUSY; |
| } |
| |
| static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3) |
| { |
| return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL, |
| 0x0100, 0x0000, |
| usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US)); |
| } |
| |
| static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value) |
| { |
| int err; |
| |
| err = bcm_ns_usb3_mii_mng_wait_idle(usb3); |
| if (err < 0) { |
| dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value); |
| return err; |
| } |
| |
| writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA); |
| |
| return 0; |
| } |
| |
| static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3) |
| { |
| int err; |
| |
| /* Enable MDIO. Setting MDCDIV as 26 */ |
| writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL); |
| |
| /* Wait for MDIO? */ |
| udelay(2); |
| |
| /* USB3 PLL Block */ |
| err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000); |
| if (err < 0) |
| return err; |
| |
| /* Assert Ana_Pllseq start */ |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000); |
| |
| /* Assert CML Divider ratio to 26 */ |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400); |
| |
| /* Asserting PLL Reset */ |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000); |
| |
| /* Deaaserting PLL Reset */ |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000); |
| |
| /* Waiting MII Mgt interface idle */ |
| bcm_ns_usb3_mii_mng_wait_idle(usb3); |
| |
| /* Deasserting USB3 system reset */ |
| writel(0, usb3->dmp + BCMA_RESET_CTL); |
| |
| /* PLL frequency monitor enable */ |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000); |
| |
| /* PIPE Block */ |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060); |
| |
| /* CMPMAX & CMPMINTH setting */ |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d); |
| |
| /* DEGLITCH MIN & MAX setting */ |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302); |
| |
| /* TXPMD block */ |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040); |
| |
| /* Enabling SSC */ |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003); |
| |
| /* Waiting MII Mgt interface idle */ |
| bcm_ns_usb3_mii_mng_wait_idle(usb3); |
| |
| return 0; |
| } |
| |
| static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3) |
| { |
| int err; |
| |
| /* Enable MDIO. Setting MDCDIV as 26 */ |
| writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL); |
| |
| /* Wait for MDIO? */ |
| udelay(2); |
| |
| /* PLL30 block */ |
| err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000); |
| if (err < 0) |
| return err; |
| |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400); |
| |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0); |
| |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c); |
| |
| /* Enable SSC */ |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040); |
| |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3); |
| |
| bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003); |
| |
| /* Waiting MII Mgt interface idle */ |
| bcm_ns_usb3_mii_mng_wait_idle(usb3); |
| |
| /* Deasserting USB3 system reset */ |
| writel(0, usb3->dmp + BCMA_RESET_CTL); |
| |
| return 0; |
| } |
| |
| static int bcm_ns_usb3_phy_init(struct phy *phy) |
| { |
| struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy); |
| int err; |
| |
| /* Perform USB3 system soft reset */ |
| writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL); |
| |
| switch (usb3->family) { |
| case BCM_NS_AX: |
| err = bcm_ns_usb3_phy_init_ns_ax(usb3); |
| break; |
| case BCM_NS_BX: |
| err = bcm_ns_usb3_phy_init_ns_bx(usb3); |
| break; |
| default: |
| WARN_ON(1); |
| err = -ENOTSUPP; |
| } |
| |
| return err; |
| } |
| |
| static const struct phy_ops ops = { |
| .init = bcm_ns_usb3_phy_init, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int bcm_ns_usb3_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| const struct of_device_id *of_id; |
| struct bcm_ns_usb3 *usb3; |
| struct resource *res; |
| struct phy_provider *phy_provider; |
| |
| usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL); |
| if (!usb3) |
| return -ENOMEM; |
| |
| usb3->dev = dev; |
| |
| of_id = of_match_device(bcm_ns_usb3_id_table, dev); |
| if (!of_id) |
| return -EINVAL; |
| usb3->family = (enum bcm_ns_family)of_id->data; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp"); |
| usb3->dmp = devm_ioremap_resource(dev, res); |
| if (IS_ERR(usb3->dmp)) { |
| dev_err(dev, "Failed to map DMP regs\n"); |
| return PTR_ERR(usb3->dmp); |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii"); |
| usb3->ccb_mii = devm_ioremap_resource(dev, res); |
| if (IS_ERR(usb3->ccb_mii)) { |
| dev_err(dev, "Failed to map ChipCommon B MII regs\n"); |
| return PTR_ERR(usb3->ccb_mii); |
| } |
| |
| usb3->phy = devm_phy_create(dev, NULL, &ops); |
| if (IS_ERR(usb3->phy)) { |
| dev_err(dev, "Failed to create PHY\n"); |
| return PTR_ERR(usb3->phy); |
| } |
| |
| phy_set_drvdata(usb3->phy, usb3); |
| platform_set_drvdata(pdev, usb3); |
| |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| if (!IS_ERR(phy_provider)) |
| dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n"); |
| |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static struct platform_driver bcm_ns_usb3_driver = { |
| .probe = bcm_ns_usb3_probe, |
| .driver = { |
| .name = "bcm_ns_usb3", |
| .of_match_table = bcm_ns_usb3_id_table, |
| }, |
| }; |
| module_platform_driver(bcm_ns_usb3_driver); |
| |
| MODULE_LICENSE("GPL v2"); |