blob: 5af33b0e3470ec4e9d5b3242fb9755e94ecbd2df [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
#
# QCOM Soc drivers
#
menu "Qualcomm SoC drivers"
config QCOM_AOSS_QMP
tristate "Qualcomm AOSS Driver"
depends on ARCH_QCOM || COMPILE_TEST
depends on MAILBOX
depends on COMMON_CLK && PM
select PM_GENERIC_DOMAINS
help
This driver provides the means of communicating with and controlling
the low-power state for resources related to the remoteproc
subsystems as well as controlling the debug clocks exposed by the Always On
Subsystem (AOSS) using Qualcomm Messaging Protocol (QMP).
config QCOM_COMMAND_DB
tristate "Qualcomm Command DB"
depends on ARCH_QCOM || COMPILE_TEST
depends on OF_RESERVED_MEM
help
Command DB queries shared memory by key string for shared system
resources. Platform drivers that require to set state of a shared
resource on a RPM-hardened platform must use this database to get
SoC specific identifier and information for the shared resources.
config QCOM_GENI_SE
tristate "QCOM GENI Serial Engine Driver"
depends on ARCH_QCOM || COMPILE_TEST
help
This driver is used to manage Generic Interface (GENI) firmware based
Qualcomm Technologies, Inc. Universal Peripheral (QUP) Wrapper. This
driver is also used to manage the common aspects of multiple Serial
Engines present in the QUP.
config QCOM_GSBI
tristate "QCOM General Serial Bus Interface"
depends on ARCH_QCOM || COMPILE_TEST
select MFD_SYSCON
help
Say y here to enable GSBI support. The GSBI provides control
functions for connecting the underlying serial UART, SPI, and I2C
devices to the output pins.
config QCOM_LLCC
tristate "Qualcomm Technologies, Inc. LLCC driver"
depends on ARCH_QCOM || COMPILE_TEST
select REGMAP_MMIO
help
Qualcomm Technologies, Inc. platform specific
Last Level Cache Controller(LLCC) driver for platforms such as,
SDM845. This provides interfaces to clients that use the LLCC.
Say yes here to enable LLCC slice driver.
config QCOM_KRYO_L2_ACCESSORS
bool
depends on (ARCH_QCOM || COMPILE_TEST) && ARM64
config QCOM_MDT_LOADER
tristate
select QCOM_SCM
config QCOM_OCMEM
tristate "Qualcomm On Chip Memory (OCMEM) driver"
depends on ARCH_QCOM
select QCOM_SCM
help
The On Chip Memory (OCMEM) allocator allows various clients to
allocate memory from OCMEM based on performance, latency and power
requirements. This is typically used by the GPU, camera/video, and
audio components on some Snapdragon SoCs.
config QCOM_PDR_HELPERS
tristate
select QCOM_QMI_HELPERS
depends on NET
config QCOM_PMIC_PDCHARGER_ULOG
tristate "Qualcomm PMIC PDCharger ULOG driver"
depends on RPMSG
depends on EVENT_TRACING
help
The Qualcomm PMIC PDCharger ULOG driver provides access to logs of
the ADSP firmware PDCharger module in charge of Battery and Power
Delivery on modern systems.
Say yes here to support PDCharger ULOG event tracing on modern
Qualcomm platforms.
config QCOM_PMIC_GLINK
tristate "Qualcomm PMIC GLINK driver"
depends on RPMSG
depends on TYPEC
depends on DRM
depends on NET
depends on OF
select AUXILIARY_BUS
select QCOM_PDR_HELPERS
select DRM_AUX_HPD_BRIDGE
help
The Qualcomm PMIC GLINK driver provides access, over GLINK, to the
USB and battery firmware running on one of the coprocessors in
several modern Qualcomm platforms.
Say yes here to support USB-C and battery status on modern Qualcomm
platforms.
config QCOM_QMI_HELPERS
tristate
depends on NET
config QCOM_RAMP_CTRL
tristate "Qualcomm Ramp Controller driver"
depends on ARCH_QCOM || COMPILE_TEST
help
The Ramp Controller is used to program the sequence ID for pulse
swallowing, enable sequence and link sequence IDs for the CPU
cores on some Qualcomm SoCs.
Say y here to enable support for the ramp controller.
config QCOM_RMTFS_MEM
tristate "Qualcomm Remote Filesystem memory driver"
depends on ARCH_QCOM
select QCOM_SCM
help
The Qualcomm remote filesystem memory driver is used for allocating
and exposing regions of shared memory with remote processors for the
purpose of exchanging sector-data between the remote filesystem
service and its clients.
Say y here if you intend to boot the modem remoteproc.
config QCOM_RPM_MASTER_STATS
tristate "Qualcomm RPM Master stats"
depends on ARCH_QCOM || COMPILE_TEST
help
The RPM Master sleep stats driver provides detailed per-subsystem
sleep/wake data, read from the RPM message RAM. It can be used to
assess whether all the low-power modes available are entered as
expected or to check which part of the SoC prevents it from sleeping.
Say y here if you intend to debug or monitor platform sleep.
config QCOM_RPMH
tristate "Qualcomm RPM-Hardened (RPMH) Communication"
depends on ARCH_QCOM || COMPILE_TEST
depends on (QCOM_COMMAND_DB || !QCOM_COMMAND_DB)
help
Support for communication with the hardened-RPM blocks in
Qualcomm Technologies Inc (QTI) SoCs. RPMH communication uses an
internal bus to transmit state requests for shared resources. A set
of hardware components aggregate requests for these resources and
help apply the aggregated state on the resource.
config QCOM_SMEM
tristate "Qualcomm Shared Memory Manager (SMEM)"
depends on ARCH_QCOM || COMPILE_TEST
depends on HWSPINLOCK
help
Say y here to enable support for the Qualcomm Shared Memory Manager.
The driver provides an interface to items in a heap shared among all
processors in a Qualcomm platform.
config QCOM_SMD_RPM
tristate "Qualcomm Resource Power Manager (RPM) over SMD"
depends on ARCH_QCOM || COMPILE_TEST
depends on RPMSG
depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
help
If you say yes to this option, support will be included for the
Resource Power Manager system found in the Qualcomm 8974 based
devices.
This is required to access many regulators, clocks and bus
frequencies controlled by the RPM on these devices.
Say M here if you want to include support for the Qualcomm RPM as a
module. This will build a module called "qcom-smd-rpm".
config QCOM_SMEM_STATE
bool
config QCOM_SMP2P
tristate "Qualcomm Shared Memory Point to Point support"
depends on MAILBOX
depends on QCOM_SMEM
select QCOM_SMEM_STATE
select IRQ_DOMAIN
help
Say yes here to support the Qualcomm Shared Memory Point to Point
protocol.
config QCOM_SMSM
tristate "Qualcomm Shared Memory State Machine"
depends on QCOM_SMEM
select QCOM_SMEM_STATE
select IRQ_DOMAIN
help
Say yes here to support the Qualcomm Shared Memory State Machine.
The state machine is represented by bits in shared memory.
config QCOM_SOCINFO
tristate "Qualcomm socinfo driver"
depends on QCOM_SMEM
select SOC_BUS
help
Say yes here to support the Qualcomm socinfo driver, providing
information about the SoC to user space.
config QCOM_SPM
tristate "Qualcomm Subsystem Power Manager (SPM)"
depends on ARCH_QCOM || COMPILE_TEST
select QCOM_SCM
help
Enable the support for the Qualcomm Subsystem Power Manager, used
to manage cores, L2 low power modes and to configure the internal
Adaptive Voltage Scaler parameters, where supported.
config QCOM_STATS
tristate "Qualcomm Technologies, Inc. (QTI) Sleep stats driver"
depends on (ARCH_QCOM && DEBUG_FS) || COMPILE_TEST
depends on QCOM_SMEM
depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
help
Qualcomm Technologies, Inc. (QTI) Sleep stats driver to read
the shared memory exported by the remote processor related to
various SoC level low power modes statistics and export to debugfs
interface.
config QCOM_WCNSS_CTRL
tristate "Qualcomm WCNSS control driver"
depends on ARCH_QCOM || COMPILE_TEST
depends on RPMSG
help
Client driver for the WCNSS_CTRL SMD channel, used to download nv
firmware to a newly booted WCNSS chip.
config QCOM_APR
tristate "Qualcomm APR/GPR Bus (Asynchronous/Generic Packet Router)"
depends on ARCH_QCOM || COMPILE_TEST
depends on RPMSG
depends on NET
select QCOM_PDR_HELPERS
help
Enable APR IPC protocol support between
application processor and QDSP6. APR is
used by audio driver to configure QDSP6
ASM, ADM and AFE modules.
config QCOM_ICC_BWMON
tristate "QCOM Interconnect Bandwidth Monitor driver"
depends on ARCH_QCOM || COMPILE_TEST
select PM_OPP
select REGMAP_MMIO
help
Sets up driver monitoring bandwidth on various interconnects and
based on that voting for interconnect bandwidth, adjusting their
speed to current demand.
Current implementation brings support for BWMON v4, used for example
on SDM845 to measure bandwidth between CPU (gladiator_noc) and Last
Level Cache (memnoc). Usage of this BWMON allows to remove some of
the fixed bandwidth votes from cpufreq (CPU nodes) thus achieve high
memory throughput even with lower CPU frequencies.
config QCOM_INLINE_CRYPTO_ENGINE
tristate
select QCOM_SCM
config QCOM_PBS
tristate "PBS trigger support for Qualcomm Technologies, Inc. PMICS"
depends on SPMI
help
This driver supports configuring software programmable boot sequencer (PBS)
trigger event through PBS RAM on Qualcomm Technologies, Inc. PMICs.
This module provides the APIs to the client drivers that wants to send the
PBS trigger event to the PBS RAM.
endmenu