| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * MAX44000 Ambient and Infrared Proximity Sensor |
| * |
| * Copyright (c) 2016, Intel Corporation. |
| * |
| * Data sheet: https://datasheets.maximintegrated.com/en/ds/MAX44000.pdf |
| * |
| * 7-bit I2C slave address 0x4a |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/util_macros.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/acpi.h> |
| |
| #define MAX44000_DRV_NAME "max44000" |
| |
| /* Registers in datasheet order */ |
| #define MAX44000_REG_STATUS 0x00 |
| #define MAX44000_REG_CFG_MAIN 0x01 |
| #define MAX44000_REG_CFG_RX 0x02 |
| #define MAX44000_REG_CFG_TX 0x03 |
| #define MAX44000_REG_ALS_DATA_HI 0x04 |
| #define MAX44000_REG_ALS_DATA_LO 0x05 |
| #define MAX44000_REG_PRX_DATA 0x16 |
| #define MAX44000_REG_ALS_UPTHR_HI 0x06 |
| #define MAX44000_REG_ALS_UPTHR_LO 0x07 |
| #define MAX44000_REG_ALS_LOTHR_HI 0x08 |
| #define MAX44000_REG_ALS_LOTHR_LO 0x09 |
| #define MAX44000_REG_PST 0x0a |
| #define MAX44000_REG_PRX_IND 0x0b |
| #define MAX44000_REG_PRX_THR 0x0c |
| #define MAX44000_REG_TRIM_GAIN_GREEN 0x0f |
| #define MAX44000_REG_TRIM_GAIN_IR 0x10 |
| |
| /* REG_CFG bits */ |
| #define MAX44000_CFG_ALSINTE 0x01 |
| #define MAX44000_CFG_PRXINTE 0x02 |
| #define MAX44000_CFG_MASK 0x1c |
| #define MAX44000_CFG_MODE_SHUTDOWN 0x00 |
| #define MAX44000_CFG_MODE_ALS_GIR 0x04 |
| #define MAX44000_CFG_MODE_ALS_G 0x08 |
| #define MAX44000_CFG_MODE_ALS_IR 0x0c |
| #define MAX44000_CFG_MODE_ALS_PRX 0x10 |
| #define MAX44000_CFG_MODE_PRX 0x14 |
| #define MAX44000_CFG_TRIM 0x20 |
| |
| /* |
| * Upper 4 bits are not documented but start as 1 on powerup |
| * Setting them to 0 causes proximity to misbehave so set them to 1 |
| */ |
| #define MAX44000_REG_CFG_RX_DEFAULT 0xf0 |
| |
| /* REG_RX bits */ |
| #define MAX44000_CFG_RX_ALSTIM_MASK 0x0c |
| #define MAX44000_CFG_RX_ALSTIM_SHIFT 2 |
| #define MAX44000_CFG_RX_ALSPGA_MASK 0x03 |
| #define MAX44000_CFG_RX_ALSPGA_SHIFT 0 |
| |
| /* REG_TX bits */ |
| #define MAX44000_LED_CURRENT_MASK 0xf |
| #define MAX44000_LED_CURRENT_MAX 11 |
| #define MAX44000_LED_CURRENT_DEFAULT 6 |
| |
| #define MAX44000_ALSDATA_OVERFLOW 0x4000 |
| |
| struct max44000_data { |
| struct mutex lock; |
| struct regmap *regmap; |
| /* Ensure naturally aligned timestamp */ |
| struct { |
| u16 channels[2]; |
| s64 ts __aligned(8); |
| } scan; |
| }; |
| |
| /* Default scale is set to the minimum of 0.03125 or 1 / (1 << 5) lux */ |
| #define MAX44000_ALS_TO_LUX_DEFAULT_FRACTION_LOG2 5 |
| |
| /* Scale can be multiplied by up to 128x via ALSPGA for measurement gain */ |
| static const int max44000_alspga_shift[] = {0, 2, 4, 7}; |
| #define MAX44000_ALSPGA_MAX_SHIFT 7 |
| |
| /* |
| * Scale can be multiplied by up to 64x via ALSTIM because of lost resolution |
| * |
| * This scaling factor is hidden from userspace and instead accounted for when |
| * reading raw values from the device. |
| * |
| * This makes it possible to cleanly expose ALSPGA as IIO_CHAN_INFO_SCALE and |
| * ALSTIM as IIO_CHAN_INFO_INT_TIME without the values affecting each other. |
| * |
| * Handling this internally is also required for buffer support because the |
| * channel's scan_type can't be modified dynamically. |
| */ |
| #define MAX44000_ALSTIM_SHIFT(alstim) (2 * (alstim)) |
| |
| /* Available integration times with pretty manual alignment: */ |
| static const int max44000_int_time_avail_ns_array[] = { |
| 100000000, |
| 25000000, |
| 6250000, |
| 1562500, |
| }; |
| static const char max44000_int_time_avail_str[] = |
| "0.100 " |
| "0.025 " |
| "0.00625 " |
| "0.0015625"; |
| |
| /* Available scales (internal to ulux) with pretty manual alignment: */ |
| static const int max44000_scale_avail_ulux_array[] = { |
| 31250, |
| 125000, |
| 500000, |
| 4000000, |
| }; |
| static const char max44000_scale_avail_str[] = |
| "0.03125 " |
| "0.125 " |
| "0.5 " |
| "4"; |
| |
| #define MAX44000_SCAN_INDEX_ALS 0 |
| #define MAX44000_SCAN_INDEX_PRX 1 |
| |
| static const struct iio_chan_spec max44000_channels[] = { |
| { |
| .type = IIO_LIGHT, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | |
| BIT(IIO_CHAN_INFO_INT_TIME), |
| .scan_index = MAX44000_SCAN_INDEX_ALS, |
| .scan_type = { |
| .sign = 'u', |
| .realbits = 14, |
| .storagebits = 16, |
| } |
| }, |
| { |
| .type = IIO_PROXIMITY, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| .scan_index = MAX44000_SCAN_INDEX_PRX, |
| .scan_type = { |
| .sign = 'u', |
| .realbits = 8, |
| .storagebits = 16, |
| } |
| }, |
| IIO_CHAN_SOFT_TIMESTAMP(2), |
| { |
| .type = IIO_CURRENT, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_SCALE), |
| .extend_name = "led", |
| .output = 1, |
| .scan_index = -1, |
| }, |
| }; |
| |
| static int max44000_read_alstim(struct max44000_data *data) |
| { |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(data->regmap, MAX44000_REG_CFG_RX, &val); |
| if (ret < 0) |
| return ret; |
| return (val & MAX44000_CFG_RX_ALSTIM_MASK) >> MAX44000_CFG_RX_ALSTIM_SHIFT; |
| } |
| |
| static int max44000_write_alstim(struct max44000_data *data, int val) |
| { |
| return regmap_write_bits(data->regmap, MAX44000_REG_CFG_RX, |
| MAX44000_CFG_RX_ALSTIM_MASK, |
| val << MAX44000_CFG_RX_ALSTIM_SHIFT); |
| } |
| |
| static int max44000_read_alspga(struct max44000_data *data) |
| { |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(data->regmap, MAX44000_REG_CFG_RX, &val); |
| if (ret < 0) |
| return ret; |
| return (val & MAX44000_CFG_RX_ALSPGA_MASK) >> MAX44000_CFG_RX_ALSPGA_SHIFT; |
| } |
| |
| static int max44000_write_alspga(struct max44000_data *data, int val) |
| { |
| return regmap_write_bits(data->regmap, MAX44000_REG_CFG_RX, |
| MAX44000_CFG_RX_ALSPGA_MASK, |
| val << MAX44000_CFG_RX_ALSPGA_SHIFT); |
| } |
| |
| static int max44000_read_alsval(struct max44000_data *data) |
| { |
| u16 regval; |
| __be16 val; |
| int alstim, ret; |
| |
| ret = regmap_bulk_read(data->regmap, MAX44000_REG_ALS_DATA_HI, |
| &val, sizeof(val)); |
| if (ret < 0) |
| return ret; |
| alstim = ret = max44000_read_alstim(data); |
| if (ret < 0) |
| return ret; |
| |
| regval = be16_to_cpu(val); |
| |
| /* |
| * Overflow is explained on datasheet page 17. |
| * |
| * It's a warning that either the G or IR channel has become saturated |
| * and that the value in the register is likely incorrect. |
| * |
| * The recommendation is to change the scale (ALSPGA). |
| * The driver just returns the max representable value. |
| */ |
| if (regval & MAX44000_ALSDATA_OVERFLOW) |
| return 0x3FFF; |
| |
| return regval << MAX44000_ALSTIM_SHIFT(alstim); |
| } |
| |
| static int max44000_write_led_current_raw(struct max44000_data *data, int val) |
| { |
| /* Maybe we should clamp the value instead? */ |
| if (val < 0 || val > MAX44000_LED_CURRENT_MAX) |
| return -ERANGE; |
| if (val >= 8) |
| val += 4; |
| return regmap_write_bits(data->regmap, MAX44000_REG_CFG_TX, |
| MAX44000_LED_CURRENT_MASK, val); |
| } |
| |
| static int max44000_read_led_current_raw(struct max44000_data *data) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(data->regmap, MAX44000_REG_CFG_TX, ®val); |
| if (ret < 0) |
| return ret; |
| regval &= MAX44000_LED_CURRENT_MASK; |
| if (regval >= 8) |
| regval -= 4; |
| return regval; |
| } |
| |
| static int max44000_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct max44000_data *data = iio_priv(indio_dev); |
| int alstim, alspga; |
| unsigned int regval; |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| switch (chan->type) { |
| case IIO_LIGHT: |
| mutex_lock(&data->lock); |
| ret = max44000_read_alsval(data); |
| mutex_unlock(&data->lock); |
| if (ret < 0) |
| return ret; |
| *val = ret; |
| return IIO_VAL_INT; |
| |
| case IIO_PROXIMITY: |
| mutex_lock(&data->lock); |
| ret = regmap_read(data->regmap, MAX44000_REG_PRX_DATA, ®val); |
| mutex_unlock(&data->lock); |
| if (ret < 0) |
| return ret; |
| *val = regval; |
| return IIO_VAL_INT; |
| |
| case IIO_CURRENT: |
| mutex_lock(&data->lock); |
| ret = max44000_read_led_current_raw(data); |
| mutex_unlock(&data->lock); |
| if (ret < 0) |
| return ret; |
| *val = ret; |
| return IIO_VAL_INT; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| case IIO_CHAN_INFO_SCALE: |
| switch (chan->type) { |
| case IIO_CURRENT: |
| /* Output register is in 10s of miliamps */ |
| *val = 10; |
| return IIO_VAL_INT; |
| |
| case IIO_LIGHT: |
| mutex_lock(&data->lock); |
| alspga = ret = max44000_read_alspga(data); |
| mutex_unlock(&data->lock); |
| if (ret < 0) |
| return ret; |
| |
| /* Avoid negative shifts */ |
| *val = (1 << MAX44000_ALSPGA_MAX_SHIFT); |
| *val2 = MAX44000_ALS_TO_LUX_DEFAULT_FRACTION_LOG2 |
| + MAX44000_ALSPGA_MAX_SHIFT |
| - max44000_alspga_shift[alspga]; |
| return IIO_VAL_FRACTIONAL_LOG2; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| case IIO_CHAN_INFO_INT_TIME: |
| mutex_lock(&data->lock); |
| alstim = ret = max44000_read_alstim(data); |
| mutex_unlock(&data->lock); |
| |
| if (ret < 0) |
| return ret; |
| *val = 0; |
| *val2 = max44000_int_time_avail_ns_array[alstim]; |
| return IIO_VAL_INT_PLUS_NANO; |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int max44000_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| struct max44000_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| if (mask == IIO_CHAN_INFO_RAW && chan->type == IIO_CURRENT) { |
| mutex_lock(&data->lock); |
| ret = max44000_write_led_current_raw(data, val); |
| mutex_unlock(&data->lock); |
| return ret; |
| } else if (mask == IIO_CHAN_INFO_INT_TIME && chan->type == IIO_LIGHT) { |
| s64 valns = val * NSEC_PER_SEC + val2; |
| int alstim = find_closest_descending(valns, |
| max44000_int_time_avail_ns_array, |
| ARRAY_SIZE(max44000_int_time_avail_ns_array)); |
| mutex_lock(&data->lock); |
| ret = max44000_write_alstim(data, alstim); |
| mutex_unlock(&data->lock); |
| return ret; |
| } else if (mask == IIO_CHAN_INFO_SCALE && chan->type == IIO_LIGHT) { |
| s64 valus = val * USEC_PER_SEC + val2; |
| int alspga = find_closest(valus, |
| max44000_scale_avail_ulux_array, |
| ARRAY_SIZE(max44000_scale_avail_ulux_array)); |
| mutex_lock(&data->lock); |
| ret = max44000_write_alspga(data, alspga); |
| mutex_unlock(&data->lock); |
| return ret; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int max44000_write_raw_get_fmt(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| long mask) |
| { |
| if (mask == IIO_CHAN_INFO_INT_TIME && chan->type == IIO_LIGHT) |
| return IIO_VAL_INT_PLUS_NANO; |
| else if (mask == IIO_CHAN_INFO_SCALE && chan->type == IIO_LIGHT) |
| return IIO_VAL_INT_PLUS_MICRO; |
| else |
| return IIO_VAL_INT; |
| } |
| |
| static IIO_CONST_ATTR(illuminance_integration_time_available, max44000_int_time_avail_str); |
| static IIO_CONST_ATTR(illuminance_scale_available, max44000_scale_avail_str); |
| |
| static struct attribute *max44000_attributes[] = { |
| &iio_const_attr_illuminance_integration_time_available.dev_attr.attr, |
| &iio_const_attr_illuminance_scale_available.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group max44000_attribute_group = { |
| .attrs = max44000_attributes, |
| }; |
| |
| static const struct iio_info max44000_info = { |
| .read_raw = max44000_read_raw, |
| .write_raw = max44000_write_raw, |
| .write_raw_get_fmt = max44000_write_raw_get_fmt, |
| .attrs = &max44000_attribute_group, |
| }; |
| |
| static bool max44000_readable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case MAX44000_REG_STATUS: |
| case MAX44000_REG_CFG_MAIN: |
| case MAX44000_REG_CFG_RX: |
| case MAX44000_REG_CFG_TX: |
| case MAX44000_REG_ALS_DATA_HI: |
| case MAX44000_REG_ALS_DATA_LO: |
| case MAX44000_REG_PRX_DATA: |
| case MAX44000_REG_ALS_UPTHR_HI: |
| case MAX44000_REG_ALS_UPTHR_LO: |
| case MAX44000_REG_ALS_LOTHR_HI: |
| case MAX44000_REG_ALS_LOTHR_LO: |
| case MAX44000_REG_PST: |
| case MAX44000_REG_PRX_IND: |
| case MAX44000_REG_PRX_THR: |
| case MAX44000_REG_TRIM_GAIN_GREEN: |
| case MAX44000_REG_TRIM_GAIN_IR: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool max44000_writeable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case MAX44000_REG_CFG_MAIN: |
| case MAX44000_REG_CFG_RX: |
| case MAX44000_REG_CFG_TX: |
| case MAX44000_REG_ALS_UPTHR_HI: |
| case MAX44000_REG_ALS_UPTHR_LO: |
| case MAX44000_REG_ALS_LOTHR_HI: |
| case MAX44000_REG_ALS_LOTHR_LO: |
| case MAX44000_REG_PST: |
| case MAX44000_REG_PRX_IND: |
| case MAX44000_REG_PRX_THR: |
| case MAX44000_REG_TRIM_GAIN_GREEN: |
| case MAX44000_REG_TRIM_GAIN_IR: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool max44000_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case MAX44000_REG_STATUS: |
| case MAX44000_REG_ALS_DATA_HI: |
| case MAX44000_REG_ALS_DATA_LO: |
| case MAX44000_REG_PRX_DATA: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool max44000_precious_reg(struct device *dev, unsigned int reg) |
| { |
| return reg == MAX44000_REG_STATUS; |
| } |
| |
| static const struct regmap_config max44000_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = MAX44000_REG_PRX_DATA, |
| .readable_reg = max44000_readable_reg, |
| .writeable_reg = max44000_writeable_reg, |
| .volatile_reg = max44000_volatile_reg, |
| .precious_reg = max44000_precious_reg, |
| |
| .use_single_read = true, |
| .use_single_write = true, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| static irqreturn_t max44000_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct max44000_data *data = iio_priv(indio_dev); |
| int index = 0; |
| unsigned int regval; |
| int ret; |
| |
| mutex_lock(&data->lock); |
| if (test_bit(MAX44000_SCAN_INDEX_ALS, indio_dev->active_scan_mask)) { |
| ret = max44000_read_alsval(data); |
| if (ret < 0) |
| goto out_unlock; |
| data->scan.channels[index++] = ret; |
| } |
| if (test_bit(MAX44000_SCAN_INDEX_PRX, indio_dev->active_scan_mask)) { |
| ret = regmap_read(data->regmap, MAX44000_REG_PRX_DATA, ®val); |
| if (ret < 0) |
| goto out_unlock; |
| data->scan.channels[index] = regval; |
| } |
| mutex_unlock(&data->lock); |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, |
| iio_get_time_ns(indio_dev)); |
| iio_trigger_notify_done(indio_dev->trig); |
| return IRQ_HANDLED; |
| |
| out_unlock: |
| mutex_unlock(&data->lock); |
| iio_trigger_notify_done(indio_dev->trig); |
| return IRQ_HANDLED; |
| } |
| |
| static int max44000_probe(struct i2c_client *client) |
| { |
| struct max44000_data *data; |
| struct iio_dev *indio_dev; |
| int ret, reg; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| data = iio_priv(indio_dev); |
| data->regmap = devm_regmap_init_i2c(client, &max44000_regmap_config); |
| if (IS_ERR(data->regmap)) { |
| dev_err(&client->dev, "regmap_init failed!\n"); |
| return PTR_ERR(data->regmap); |
| } |
| |
| mutex_init(&data->lock); |
| indio_dev->info = &max44000_info; |
| indio_dev->name = MAX44000_DRV_NAME; |
| indio_dev->channels = max44000_channels; |
| indio_dev->num_channels = ARRAY_SIZE(max44000_channels); |
| |
| /* |
| * The device doesn't have a reset function so we just clear some |
| * important bits at probe time to ensure sane operation. |
| * |
| * Since we don't support interrupts/events the threshold values are |
| * not important. We also don't touch trim values. |
| */ |
| |
| /* Reset ALS scaling bits */ |
| ret = regmap_write(data->regmap, MAX44000_REG_CFG_RX, |
| MAX44000_REG_CFG_RX_DEFAULT); |
| if (ret < 0) { |
| dev_err(&client->dev, "failed to write default CFG_RX: %d\n", |
| ret); |
| return ret; |
| } |
| |
| /* |
| * By default the LED pulse used for the proximity sensor is disabled. |
| * Set a middle value so that we get some sort of valid data by default. |
| */ |
| ret = max44000_write_led_current_raw(data, MAX44000_LED_CURRENT_DEFAULT); |
| if (ret < 0) { |
| dev_err(&client->dev, "failed to write init config: %d\n", ret); |
| return ret; |
| } |
| |
| /* Reset CFG bits to ALS_PRX mode which allows easy reading of both values. */ |
| reg = MAX44000_CFG_TRIM | MAX44000_CFG_MODE_ALS_PRX; |
| ret = regmap_write(data->regmap, MAX44000_REG_CFG_MAIN, reg); |
| if (ret < 0) { |
| dev_err(&client->dev, "failed to write init config: %d\n", ret); |
| return ret; |
| } |
| |
| /* Read status at least once to clear any stale interrupt bits. */ |
| ret = regmap_read(data->regmap, MAX44000_REG_STATUS, ®); |
| if (ret < 0) { |
| dev_err(&client->dev, "failed to read init status: %d\n", ret); |
| return ret; |
| } |
| |
| ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL, |
| max44000_trigger_handler, NULL); |
| if (ret < 0) { |
| dev_err(&client->dev, "iio triggered buffer setup failed\n"); |
| return ret; |
| } |
| |
| return devm_iio_device_register(&client->dev, indio_dev); |
| } |
| |
| static const struct i2c_device_id max44000_id[] = { |
| {"max44000", 0}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, max44000_id); |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id max44000_acpi_match[] = { |
| {"MAX44000", 0}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, max44000_acpi_match); |
| #endif |
| |
| static struct i2c_driver max44000_driver = { |
| .driver = { |
| .name = MAX44000_DRV_NAME, |
| .acpi_match_table = ACPI_PTR(max44000_acpi_match), |
| }, |
| .probe = max44000_probe, |
| .id_table = max44000_id, |
| }; |
| |
| module_i2c_driver(max44000_driver); |
| |
| MODULE_AUTHOR("Crestez Dan Leonard <leonard.crestez@intel.com>"); |
| MODULE_DESCRIPTION("MAX44000 Ambient and Infrared Proximity Sensor"); |
| MODULE_LICENSE("GPL v2"); |