| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Sony imx334 sensor driver |
| * |
| * Copyright (C) 2021 Intel Corporation |
| */ |
| #include <asm/unaligned.h> |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-fwnode.h> |
| #include <media/v4l2-subdev.h> |
| |
| /* Streaming Mode */ |
| #define IMX334_REG_MODE_SELECT 0x3000 |
| #define IMX334_MODE_STANDBY 0x01 |
| #define IMX334_MODE_STREAMING 0x00 |
| |
| /* Lines per frame */ |
| #define IMX334_REG_LPFR 0x3030 |
| |
| /* Chip ID */ |
| #define IMX334_REG_ID 0x3044 |
| #define IMX334_ID 0x1e |
| |
| /* Exposure control */ |
| #define IMX334_REG_SHUTTER 0x3058 |
| #define IMX334_EXPOSURE_MIN 1 |
| #define IMX334_EXPOSURE_OFFSET 5 |
| #define IMX334_EXPOSURE_STEP 1 |
| #define IMX334_EXPOSURE_DEFAULT 0x0648 |
| |
| /* Analog gain control */ |
| #define IMX334_REG_AGAIN 0x30e8 |
| #define IMX334_AGAIN_MIN 0 |
| #define IMX334_AGAIN_MAX 240 |
| #define IMX334_AGAIN_STEP 1 |
| #define IMX334_AGAIN_DEFAULT 0 |
| |
| /* Group hold register */ |
| #define IMX334_REG_HOLD 0x3001 |
| |
| /* Input clock rate */ |
| #define IMX334_INCLK_RATE 24000000 |
| |
| /* CSI2 HW configuration */ |
| #define IMX334_LINK_FREQ_891M 891000000 |
| #define IMX334_LINK_FREQ_445M 445500000 |
| #define IMX334_NUM_DATA_LANES 4 |
| |
| #define IMX334_REG_MIN 0x00 |
| #define IMX334_REG_MAX 0xfffff |
| |
| /* Test Pattern Control */ |
| #define IMX334_REG_TP 0x329e |
| #define IMX334_TP_COLOR_HBARS 0xA |
| #define IMX334_TP_COLOR_VBARS 0xB |
| |
| #define IMX334_TPG_EN_DOUT 0x329c |
| #define IMX334_TP_ENABLE 0x1 |
| #define IMX334_TP_DISABLE 0x0 |
| |
| #define IMX334_TPG_COLORW 0x32a0 |
| #define IMX334_TPG_COLORW_120P 0x13 |
| |
| #define IMX334_TP_CLK_EN 0x3148 |
| #define IMX334_TP_CLK_EN_VAL 0x10 |
| #define IMX334_TP_CLK_DIS_VAL 0x0 |
| |
| #define IMX334_DIG_CLP_MODE 0x3280 |
| |
| /** |
| * struct imx334_reg - imx334 sensor register |
| * @address: Register address |
| * @val: Register value |
| */ |
| struct imx334_reg { |
| u16 address; |
| u8 val; |
| }; |
| |
| /** |
| * struct imx334_reg_list - imx334 sensor register list |
| * @num_of_regs: Number of registers in the list |
| * @regs: Pointer to register list |
| */ |
| struct imx334_reg_list { |
| u32 num_of_regs; |
| const struct imx334_reg *regs; |
| }; |
| |
| /** |
| * struct imx334_mode - imx334 sensor mode structure |
| * @width: Frame width |
| * @height: Frame height |
| * @hblank: Horizontal blanking in lines |
| * @vblank: Vertical blanking in lines |
| * @vblank_min: Minimal vertical blanking in lines |
| * @vblank_max: Maximum vertical blanking in lines |
| * @pclk: Sensor pixel clock |
| * @link_freq_idx: Link frequency index |
| * @reg_list: Register list for sensor mode |
| */ |
| struct imx334_mode { |
| u32 width; |
| u32 height; |
| u32 hblank; |
| u32 vblank; |
| u32 vblank_min; |
| u32 vblank_max; |
| u64 pclk; |
| u32 link_freq_idx; |
| struct imx334_reg_list reg_list; |
| }; |
| |
| /** |
| * struct imx334 - imx334 sensor device structure |
| * @dev: Pointer to generic device |
| * @client: Pointer to i2c client |
| * @sd: V4L2 sub-device |
| * @pad: Media pad. Only one pad supported |
| * @reset_gpio: Sensor reset gpio |
| * @inclk: Sensor input clock |
| * @ctrl_handler: V4L2 control handler |
| * @link_freq_ctrl: Pointer to link frequency control |
| * @pclk_ctrl: Pointer to pixel clock control |
| * @hblank_ctrl: Pointer to horizontal blanking control |
| * @vblank_ctrl: Pointer to vertical blanking control |
| * @exp_ctrl: Pointer to exposure control |
| * @again_ctrl: Pointer to analog gain control |
| * @vblank: Vertical blanking in lines |
| * @cur_mode: Pointer to current selected sensor mode |
| * @mutex: Mutex for serializing sensor controls |
| * @menu_skip_mask: Menu skip mask for link_freq_ctrl |
| * @cur_code: current selected format code |
| */ |
| struct imx334 { |
| struct device *dev; |
| struct i2c_client *client; |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct gpio_desc *reset_gpio; |
| struct clk *inclk; |
| struct v4l2_ctrl_handler ctrl_handler; |
| struct v4l2_ctrl *link_freq_ctrl; |
| struct v4l2_ctrl *pclk_ctrl; |
| struct v4l2_ctrl *hblank_ctrl; |
| struct v4l2_ctrl *vblank_ctrl; |
| struct { |
| struct v4l2_ctrl *exp_ctrl; |
| struct v4l2_ctrl *again_ctrl; |
| }; |
| u32 vblank; |
| const struct imx334_mode *cur_mode; |
| struct mutex mutex; |
| unsigned long menu_skip_mask; |
| u32 cur_code; |
| }; |
| |
| static const s64 link_freq[] = { |
| IMX334_LINK_FREQ_891M, |
| IMX334_LINK_FREQ_445M, |
| }; |
| |
| /* Sensor mode registers for 1920x1080@30fps */ |
| static const struct imx334_reg mode_1920x1080_regs[] = { |
| {0x3000, 0x01}, |
| {0x3018, 0x04}, |
| {0x3030, 0xca}, |
| {0x3031, 0x08}, |
| {0x3032, 0x00}, |
| {0x3034, 0x4c}, |
| {0x3035, 0x04}, |
| {0x302c, 0xf0}, |
| {0x302d, 0x03}, |
| {0x302e, 0x80}, |
| {0x302f, 0x07}, |
| {0x3074, 0xcc}, |
| {0x3075, 0x02}, |
| {0x308e, 0xcd}, |
| {0x308f, 0x02}, |
| {0x3076, 0x38}, |
| {0x3077, 0x04}, |
| {0x3090, 0x38}, |
| {0x3091, 0x04}, |
| {0x3308, 0x38}, |
| {0x3309, 0x04}, |
| {0x30C6, 0x00}, |
| {0x30c7, 0x00}, |
| {0x30ce, 0x00}, |
| {0x30cf, 0x00}, |
| {0x30d8, 0x18}, |
| {0x30d9, 0x0a}, |
| {0x304c, 0x00}, |
| {0x304e, 0x00}, |
| {0x304f, 0x00}, |
| {0x3050, 0x00}, |
| {0x30b6, 0x00}, |
| {0x30b7, 0x00}, |
| {0x3116, 0x08}, |
| {0x3117, 0x00}, |
| {0x31a0, 0x20}, |
| {0x31a1, 0x0f}, |
| {0x300c, 0x3b}, |
| {0x300d, 0x29}, |
| {0x314c, 0x29}, |
| {0x314d, 0x01}, |
| {0x315a, 0x06}, |
| {0x3168, 0xa0}, |
| {0x316a, 0x7e}, |
| {0x319e, 0x02}, |
| {0x3199, 0x00}, |
| {0x319d, 0x00}, |
| {0x31dd, 0x03}, |
| {0x3300, 0x00}, |
| {0x341c, 0xff}, |
| {0x341d, 0x01}, |
| {0x3a01, 0x03}, |
| {0x3a18, 0x7f}, |
| {0x3a19, 0x00}, |
| {0x3a1a, 0x37}, |
| {0x3a1b, 0x00}, |
| {0x3a1c, 0x37}, |
| {0x3a1d, 0x00}, |
| {0x3a1e, 0xf7}, |
| {0x3a1f, 0x00}, |
| {0x3a20, 0x3f}, |
| {0x3a21, 0x00}, |
| {0x3a20, 0x6f}, |
| {0x3a21, 0x00}, |
| {0x3a20, 0x3f}, |
| {0x3a21, 0x00}, |
| {0x3a20, 0x5f}, |
| {0x3a21, 0x00}, |
| {0x3a20, 0x2f}, |
| {0x3a21, 0x00}, |
| {0x3078, 0x02}, |
| {0x3079, 0x00}, |
| {0x307a, 0x00}, |
| {0x307b, 0x00}, |
| {0x3080, 0x02}, |
| {0x3081, 0x00}, |
| {0x3082, 0x00}, |
| {0x3083, 0x00}, |
| {0x3088, 0x02}, |
| {0x3094, 0x00}, |
| {0x3095, 0x00}, |
| {0x3096, 0x00}, |
| {0x309b, 0x02}, |
| {0x309c, 0x00}, |
| {0x309d, 0x00}, |
| {0x309e, 0x00}, |
| {0x30a4, 0x00}, |
| {0x30a5, 0x00}, |
| {0x3288, 0x21}, |
| {0x328a, 0x02}, |
| {0x3414, 0x05}, |
| {0x3416, 0x18}, |
| {0x35Ac, 0x0e}, |
| {0x3648, 0x01}, |
| {0x364a, 0x04}, |
| {0x364c, 0x04}, |
| {0x3678, 0x01}, |
| {0x367c, 0x31}, |
| {0x367e, 0x31}, |
| {0x3708, 0x02}, |
| {0x3714, 0x01}, |
| {0x3715, 0x02}, |
| {0x3716, 0x02}, |
| {0x3717, 0x02}, |
| {0x371c, 0x3d}, |
| {0x371d, 0x3f}, |
| {0x372c, 0x00}, |
| {0x372d, 0x00}, |
| {0x372e, 0x46}, |
| {0x372f, 0x00}, |
| {0x3730, 0x89}, |
| {0x3731, 0x00}, |
| {0x3732, 0x08}, |
| {0x3733, 0x01}, |
| {0x3734, 0xfe}, |
| {0x3735, 0x05}, |
| {0x375d, 0x00}, |
| {0x375e, 0x00}, |
| {0x375f, 0x61}, |
| {0x3760, 0x06}, |
| {0x3768, 0x1b}, |
| {0x3769, 0x1b}, |
| {0x376a, 0x1a}, |
| {0x376b, 0x19}, |
| {0x376c, 0x18}, |
| {0x376d, 0x14}, |
| {0x376e, 0x0f}, |
| {0x3776, 0x00}, |
| {0x3777, 0x00}, |
| {0x3778, 0x46}, |
| {0x3779, 0x00}, |
| {0x377a, 0x08}, |
| {0x377b, 0x01}, |
| {0x377c, 0x45}, |
| {0x377d, 0x01}, |
| {0x377e, 0x23}, |
| {0x377f, 0x02}, |
| {0x3780, 0xd9}, |
| {0x3781, 0x03}, |
| {0x3782, 0xf5}, |
| {0x3783, 0x06}, |
| {0x3784, 0xa5}, |
| {0x3788, 0x0f}, |
| {0x378a, 0xd9}, |
| {0x378b, 0x03}, |
| {0x378c, 0xeb}, |
| {0x378d, 0x05}, |
| {0x378e, 0x87}, |
| {0x378f, 0x06}, |
| {0x3790, 0xf5}, |
| {0x3792, 0x43}, |
| {0x3794, 0x7a}, |
| {0x3796, 0xa1}, |
| {0x37b0, 0x37}, |
| {0x3e04, 0x0e}, |
| {0x30e8, 0x50}, |
| {0x30e9, 0x00}, |
| {0x3e04, 0x0e}, |
| {0x3002, 0x00}, |
| }; |
| |
| /* Sensor mode registers for 3840x2160@30fps */ |
| static const struct imx334_reg mode_3840x2160_regs[] = { |
| {0x3000, 0x01}, |
| {0x3002, 0x00}, |
| {0x3018, 0x04}, |
| {0x37b0, 0x36}, |
| {0x304c, 0x00}, |
| {0x300c, 0x3b}, |
| {0x300d, 0x2a}, |
| {0x3034, 0x26}, |
| {0x3035, 0x02}, |
| {0x314c, 0x29}, |
| {0x314d, 0x01}, |
| {0x315a, 0x02}, |
| {0x3168, 0xa0}, |
| {0x316a, 0x7e}, |
| {0x3288, 0x21}, |
| {0x328a, 0x02}, |
| {0x302c, 0x3c}, |
| {0x302d, 0x00}, |
| {0x302e, 0x00}, |
| {0x302f, 0x0f}, |
| {0x3076, 0x70}, |
| {0x3077, 0x08}, |
| {0x3090, 0x70}, |
| {0x3091, 0x08}, |
| {0x30d8, 0x20}, |
| {0x30d9, 0x12}, |
| {0x3308, 0x70}, |
| {0x3309, 0x08}, |
| {0x3414, 0x05}, |
| {0x3416, 0x18}, |
| {0x35ac, 0x0e}, |
| {0x3648, 0x01}, |
| {0x364a, 0x04}, |
| {0x364c, 0x04}, |
| {0x3678, 0x01}, |
| {0x367c, 0x31}, |
| {0x367e, 0x31}, |
| {0x3708, 0x02}, |
| {0x3714, 0x01}, |
| {0x3715, 0x02}, |
| {0x3716, 0x02}, |
| {0x3717, 0x02}, |
| {0x371c, 0x3d}, |
| {0x371d, 0x3f}, |
| {0x372c, 0x00}, |
| {0x372d, 0x00}, |
| {0x372e, 0x46}, |
| {0x372f, 0x00}, |
| {0x3730, 0x89}, |
| {0x3731, 0x00}, |
| {0x3732, 0x08}, |
| {0x3733, 0x01}, |
| {0x3734, 0xfe}, |
| {0x3735, 0x05}, |
| {0x375d, 0x00}, |
| {0x375e, 0x00}, |
| {0x375f, 0x61}, |
| {0x3760, 0x06}, |
| {0x3768, 0x1b}, |
| {0x3769, 0x1b}, |
| {0x376a, 0x1a}, |
| {0x376b, 0x19}, |
| {0x376c, 0x18}, |
| {0x376d, 0x14}, |
| {0x376e, 0x0f}, |
| {0x3776, 0x00}, |
| {0x3777, 0x00}, |
| {0x3778, 0x46}, |
| {0x3779, 0x00}, |
| {0x377a, 0x08}, |
| {0x377b, 0x01}, |
| {0x377c, 0x45}, |
| {0x377d, 0x01}, |
| {0x377e, 0x23}, |
| {0x377f, 0x02}, |
| {0x3780, 0xd9}, |
| {0x3781, 0x03}, |
| {0x3782, 0xf5}, |
| {0x3783, 0x06}, |
| {0x3784, 0xa5}, |
| {0x3788, 0x0f}, |
| {0x378a, 0xd9}, |
| {0x378b, 0x03}, |
| {0x378c, 0xeb}, |
| {0x378d, 0x05}, |
| {0x378e, 0x87}, |
| {0x378f, 0x06}, |
| {0x3790, 0xf5}, |
| {0x3792, 0x43}, |
| {0x3794, 0x7a}, |
| {0x3796, 0xa1}, |
| {0x3e04, 0x0e}, |
| {0x319e, 0x00}, |
| {0x3a00, 0x01}, |
| {0x3a18, 0xbf}, |
| {0x3a19, 0x00}, |
| {0x3a1a, 0x67}, |
| {0x3a1b, 0x00}, |
| {0x3a1c, 0x6f}, |
| {0x3a1d, 0x00}, |
| {0x3a1e, 0xd7}, |
| {0x3a1f, 0x01}, |
| {0x3a20, 0x6f}, |
| {0x3a21, 0x00}, |
| {0x3a22, 0xcf}, |
| {0x3a23, 0x00}, |
| {0x3a24, 0x6f}, |
| {0x3a25, 0x00}, |
| {0x3a26, 0xb7}, |
| {0x3a27, 0x00}, |
| {0x3a28, 0x5f}, |
| {0x3a29, 0x00}, |
| }; |
| |
| static const char * const imx334_test_pattern_menu[] = { |
| "Disabled", |
| "Vertical Color Bars", |
| "Horizontal Color Bars", |
| }; |
| |
| static const int imx334_test_pattern_val[] = { |
| IMX334_TP_DISABLE, |
| IMX334_TP_COLOR_HBARS, |
| IMX334_TP_COLOR_VBARS, |
| }; |
| |
| static const struct imx334_reg raw10_framefmt_regs[] = { |
| {0x3050, 0x00}, |
| {0x319d, 0x00}, |
| {0x341c, 0xff}, |
| {0x341d, 0x01}, |
| }; |
| |
| static const struct imx334_reg raw12_framefmt_regs[] = { |
| {0x3050, 0x01}, |
| {0x319d, 0x01}, |
| {0x341c, 0x47}, |
| {0x341d, 0x00}, |
| }; |
| |
| static const u32 imx334_mbus_codes[] = { |
| MEDIA_BUS_FMT_SRGGB12_1X12, |
| MEDIA_BUS_FMT_SRGGB10_1X10, |
| }; |
| |
| /* Supported sensor mode configurations */ |
| static const struct imx334_mode supported_modes[] = { |
| { |
| .width = 3840, |
| .height = 2160, |
| .hblank = 560, |
| .vblank = 2340, |
| .vblank_min = 90, |
| .vblank_max = 132840, |
| .pclk = 594000000, |
| .link_freq_idx = 0, |
| .reg_list = { |
| .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs), |
| .regs = mode_3840x2160_regs, |
| }, |
| }, { |
| .width = 1920, |
| .height = 1080, |
| .hblank = 2480, |
| .vblank = 1170, |
| .vblank_min = 45, |
| .vblank_max = 132840, |
| .pclk = 297000000, |
| .link_freq_idx = 1, |
| .reg_list = { |
| .num_of_regs = ARRAY_SIZE(mode_1920x1080_regs), |
| .regs = mode_1920x1080_regs, |
| }, |
| }, |
| }; |
| |
| /** |
| * to_imx334() - imv334 V4L2 sub-device to imx334 device. |
| * @subdev: pointer to imx334 V4L2 sub-device |
| * |
| * Return: pointer to imx334 device |
| */ |
| static inline struct imx334 *to_imx334(struct v4l2_subdev *subdev) |
| { |
| return container_of(subdev, struct imx334, sd); |
| } |
| |
| /** |
| * imx334_read_reg() - Read registers. |
| * @imx334: pointer to imx334 device |
| * @reg: register address |
| * @len: length of bytes to read. Max supported bytes is 4 |
| * @val: pointer to register value to be filled. |
| * |
| * Big endian register addresses with little endian values. |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_read_reg(struct imx334 *imx334, u16 reg, u32 len, u32 *val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&imx334->sd); |
| struct i2c_msg msgs[2] = {0}; |
| u8 addr_buf[2] = {0}; |
| u8 data_buf[4] = {0}; |
| int ret; |
| |
| if (WARN_ON(len > 4)) |
| return -EINVAL; |
| |
| put_unaligned_be16(reg, addr_buf); |
| |
| /* Write register address */ |
| msgs[0].addr = client->addr; |
| msgs[0].flags = 0; |
| msgs[0].len = ARRAY_SIZE(addr_buf); |
| msgs[0].buf = addr_buf; |
| |
| /* Read data from register */ |
| msgs[1].addr = client->addr; |
| msgs[1].flags = I2C_M_RD; |
| msgs[1].len = len; |
| msgs[1].buf = data_buf; |
| |
| ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| if (ret != ARRAY_SIZE(msgs)) |
| return -EIO; |
| |
| *val = get_unaligned_le32(data_buf); |
| |
| return 0; |
| } |
| |
| /** |
| * imx334_write_reg() - Write register |
| * @imx334: pointer to imx334 device |
| * @reg: register address |
| * @len: length of bytes. Max supported bytes is 4 |
| * @val: register value |
| * |
| * Big endian register addresses with little endian values. |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_write_reg(struct imx334 *imx334, u16 reg, u32 len, u32 val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&imx334->sd); |
| u8 buf[6] = {0}; |
| |
| if (WARN_ON(len > 4)) |
| return -EINVAL; |
| |
| put_unaligned_be16(reg, buf); |
| put_unaligned_le32(val, buf + 2); |
| if (i2c_master_send(client, buf, len + 2) != len + 2) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| /** |
| * imx334_write_regs() - Write a list of registers |
| * @imx334: pointer to imx334 device |
| * @regs: list of registers to be written |
| * @len: length of registers array |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_write_regs(struct imx334 *imx334, |
| const struct imx334_reg *regs, u32 len) |
| { |
| unsigned int i; |
| int ret; |
| |
| for (i = 0; i < len; i++) { |
| ret = imx334_write_reg(imx334, regs[i].address, 1, regs[i].val); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * imx334_update_controls() - Update control ranges based on streaming mode |
| * @imx334: pointer to imx334 device |
| * @mode: pointer to imx334_mode sensor mode |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_update_controls(struct imx334 *imx334, |
| const struct imx334_mode *mode) |
| { |
| int ret; |
| |
| ret = __v4l2_ctrl_s_ctrl(imx334->link_freq_ctrl, mode->link_freq_idx); |
| if (ret) |
| return ret; |
| |
| ret = __v4l2_ctrl_modify_range(imx334->pclk_ctrl, mode->pclk, |
| mode->pclk, 1, mode->pclk); |
| if (ret) |
| return ret; |
| |
| ret = __v4l2_ctrl_modify_range(imx334->hblank_ctrl, mode->hblank, |
| mode->hblank, 1, mode->hblank); |
| if (ret) |
| return ret; |
| |
| ret = __v4l2_ctrl_modify_range(imx334->vblank_ctrl, mode->vblank_min, |
| mode->vblank_max, 1, mode->vblank); |
| if (ret) |
| return ret; |
| |
| return __v4l2_ctrl_s_ctrl(imx334->vblank_ctrl, mode->vblank); |
| } |
| |
| /** |
| * imx334_update_exp_gain() - Set updated exposure and gain |
| * @imx334: pointer to imx334 device |
| * @exposure: updated exposure value |
| * @gain: updated analog gain value |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_update_exp_gain(struct imx334 *imx334, u32 exposure, u32 gain) |
| { |
| u32 lpfr, shutter; |
| int ret; |
| |
| lpfr = imx334->vblank + imx334->cur_mode->height; |
| shutter = lpfr - exposure; |
| |
| dev_dbg(imx334->dev, "Set long exp %u analog gain %u sh0 %u lpfr %u", |
| exposure, gain, shutter, lpfr); |
| |
| ret = imx334_write_reg(imx334, IMX334_REG_HOLD, 1, 1); |
| if (ret) |
| return ret; |
| |
| ret = imx334_write_reg(imx334, IMX334_REG_LPFR, 3, lpfr); |
| if (ret) |
| goto error_release_group_hold; |
| |
| ret = imx334_write_reg(imx334, IMX334_REG_SHUTTER, 3, shutter); |
| if (ret) |
| goto error_release_group_hold; |
| |
| ret = imx334_write_reg(imx334, IMX334_REG_AGAIN, 1, gain); |
| |
| error_release_group_hold: |
| imx334_write_reg(imx334, IMX334_REG_HOLD, 1, 0); |
| |
| return ret; |
| } |
| |
| /** |
| * imx334_set_ctrl() - Set subdevice control |
| * @ctrl: pointer to v4l2_ctrl structure |
| * |
| * Supported controls: |
| * - V4L2_CID_VBLANK |
| * - cluster controls: |
| * - V4L2_CID_ANALOGUE_GAIN |
| * - V4L2_CID_EXPOSURE |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_set_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct imx334 *imx334 = |
| container_of(ctrl->handler, struct imx334, ctrl_handler); |
| u32 analog_gain; |
| u32 exposure; |
| int ret; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_VBLANK: |
| imx334->vblank = imx334->vblank_ctrl->val; |
| |
| dev_dbg(imx334->dev, "Received vblank %u, new lpfr %u", |
| imx334->vblank, |
| imx334->vblank + imx334->cur_mode->height); |
| |
| ret = __v4l2_ctrl_modify_range(imx334->exp_ctrl, |
| IMX334_EXPOSURE_MIN, |
| imx334->vblank + |
| imx334->cur_mode->height - |
| IMX334_EXPOSURE_OFFSET, |
| 1, IMX334_EXPOSURE_DEFAULT); |
| break; |
| case V4L2_CID_EXPOSURE: |
| |
| /* Set controls only if sensor is in power on state */ |
| if (!pm_runtime_get_if_in_use(imx334->dev)) |
| return 0; |
| |
| exposure = ctrl->val; |
| analog_gain = imx334->again_ctrl->val; |
| |
| dev_dbg(imx334->dev, "Received exp %u analog gain %u", |
| exposure, analog_gain); |
| |
| ret = imx334_update_exp_gain(imx334, exposure, analog_gain); |
| |
| pm_runtime_put(imx334->dev); |
| |
| break; |
| case V4L2_CID_PIXEL_RATE: |
| case V4L2_CID_LINK_FREQ: |
| case V4L2_CID_HBLANK: |
| ret = 0; |
| break; |
| case V4L2_CID_TEST_PATTERN: |
| if (ctrl->val) { |
| imx334_write_reg(imx334, IMX334_TP_CLK_EN, 1, |
| IMX334_TP_CLK_EN_VAL); |
| imx334_write_reg(imx334, IMX334_DIG_CLP_MODE, 1, 0x0); |
| imx334_write_reg(imx334, IMX334_TPG_COLORW, 1, |
| IMX334_TPG_COLORW_120P); |
| imx334_write_reg(imx334, IMX334_REG_TP, 1, |
| imx334_test_pattern_val[ctrl->val]); |
| imx334_write_reg(imx334, IMX334_TPG_EN_DOUT, 1, |
| IMX334_TP_ENABLE); |
| } else { |
| imx334_write_reg(imx334, IMX334_DIG_CLP_MODE, 1, 0x1); |
| imx334_write_reg(imx334, IMX334_TP_CLK_EN, 1, |
| IMX334_TP_CLK_DIS_VAL); |
| imx334_write_reg(imx334, IMX334_TPG_EN_DOUT, 1, |
| IMX334_TP_DISABLE); |
| } |
| ret = 0; |
| break; |
| default: |
| dev_err(imx334->dev, "Invalid control %d", ctrl->id); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| /* V4l2 subdevice control ops*/ |
| static const struct v4l2_ctrl_ops imx334_ctrl_ops = { |
| .s_ctrl = imx334_set_ctrl, |
| }; |
| |
| static int imx334_get_format_code(struct imx334 *imx334, u32 code) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(imx334_mbus_codes); i++) { |
| if (imx334_mbus_codes[i] == code) |
| return imx334_mbus_codes[i]; |
| } |
| |
| return imx334_mbus_codes[0]; |
| } |
| |
| /** |
| * imx334_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes |
| * @sd: pointer to imx334 V4L2 sub-device structure |
| * @sd_state: V4L2 sub-device state |
| * @code: V4L2 sub-device code enumeration need to be filled |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->index >= ARRAY_SIZE(imx334_mbus_codes)) |
| return -EINVAL; |
| |
| code->code = imx334_mbus_codes[code->index]; |
| |
| return 0; |
| } |
| |
| /** |
| * imx334_enum_frame_size() - Enumerate V4L2 sub-device frame sizes |
| * @sd: pointer to imx334 V4L2 sub-device structure |
| * @sd_state: V4L2 sub-device state |
| * @fsize: V4L2 sub-device size enumeration need to be filled |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_enum_frame_size(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_frame_size_enum *fsize) |
| { |
| struct imx334 *imx334 = to_imx334(sd); |
| u32 code; |
| |
| if (fsize->index >= ARRAY_SIZE(supported_modes)) |
| return -EINVAL; |
| |
| code = imx334_get_format_code(imx334, fsize->code); |
| |
| if (fsize->code != code) |
| return -EINVAL; |
| |
| fsize->min_width = supported_modes[fsize->index].width; |
| fsize->max_width = fsize->min_width; |
| fsize->min_height = supported_modes[fsize->index].height; |
| fsize->max_height = fsize->min_height; |
| |
| return 0; |
| } |
| |
| /** |
| * imx334_fill_pad_format() - Fill subdevice pad format |
| * from selected sensor mode |
| * @imx334: pointer to imx334 device |
| * @mode: pointer to imx334_mode sensor mode |
| * @fmt: V4L2 sub-device format need to be filled |
| */ |
| static void imx334_fill_pad_format(struct imx334 *imx334, |
| const struct imx334_mode *mode, |
| struct v4l2_subdev_format *fmt) |
| { |
| fmt->format.width = mode->width; |
| fmt->format.height = mode->height; |
| fmt->format.field = V4L2_FIELD_NONE; |
| fmt->format.colorspace = V4L2_COLORSPACE_RAW; |
| fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; |
| fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT; |
| fmt->format.xfer_func = V4L2_XFER_FUNC_NONE; |
| } |
| |
| /** |
| * imx334_get_pad_format() - Get subdevice pad format |
| * @sd: pointer to imx334 V4L2 sub-device structure |
| * @sd_state: V4L2 sub-device state |
| * @fmt: V4L2 sub-device format need to be set |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_get_pad_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct imx334 *imx334 = to_imx334(sd); |
| |
| mutex_lock(&imx334->mutex); |
| |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| struct v4l2_mbus_framefmt *framefmt; |
| |
| framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); |
| fmt->format = *framefmt; |
| } else { |
| fmt->format.code = imx334->cur_code; |
| imx334_fill_pad_format(imx334, imx334->cur_mode, fmt); |
| } |
| |
| mutex_unlock(&imx334->mutex); |
| |
| return 0; |
| } |
| |
| /** |
| * imx334_set_pad_format() - Set subdevice pad format |
| * @sd: pointer to imx334 V4L2 sub-device structure |
| * @sd_state: V4L2 sub-device state |
| * @fmt: V4L2 sub-device format need to be set |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_set_pad_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct imx334 *imx334 = to_imx334(sd); |
| const struct imx334_mode *mode; |
| int ret = 0; |
| |
| mutex_lock(&imx334->mutex); |
| |
| mode = v4l2_find_nearest_size(supported_modes, |
| ARRAY_SIZE(supported_modes), |
| width, height, |
| fmt->format.width, fmt->format.height); |
| |
| imx334_fill_pad_format(imx334, mode, fmt); |
| fmt->format.code = imx334_get_format_code(imx334, fmt->format.code); |
| |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| struct v4l2_mbus_framefmt *framefmt; |
| |
| framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad); |
| *framefmt = fmt->format; |
| } else if (imx334->cur_mode != mode || imx334->cur_code != fmt->format.code) { |
| imx334->cur_code = fmt->format.code; |
| ret = imx334_update_controls(imx334, mode); |
| if (!ret) |
| imx334->cur_mode = mode; |
| } |
| |
| mutex_unlock(&imx334->mutex); |
| |
| return ret; |
| } |
| |
| /** |
| * imx334_init_state() - Initialize sub-device state |
| * @sd: pointer to imx334 V4L2 sub-device structure |
| * @sd_state: V4L2 sub-device state |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_init_state(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state) |
| { |
| struct imx334 *imx334 = to_imx334(sd); |
| struct v4l2_subdev_format fmt = { 0 }; |
| |
| fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; |
| |
| mutex_lock(&imx334->mutex); |
| |
| imx334_fill_pad_format(imx334, imx334->cur_mode, &fmt); |
| |
| __v4l2_ctrl_modify_range(imx334->link_freq_ctrl, 0, |
| __fls(imx334->menu_skip_mask), |
| ~(imx334->menu_skip_mask), |
| __ffs(imx334->menu_skip_mask)); |
| |
| mutex_unlock(&imx334->mutex); |
| |
| return imx334_set_pad_format(sd, sd_state, &fmt); |
| } |
| |
| static int imx334_set_framefmt(struct imx334 *imx334) |
| { |
| switch (imx334->cur_code) { |
| case MEDIA_BUS_FMT_SRGGB10_1X10: |
| return imx334_write_regs(imx334, raw10_framefmt_regs, |
| ARRAY_SIZE(raw10_framefmt_regs)); |
| |
| case MEDIA_BUS_FMT_SRGGB12_1X12: |
| return imx334_write_regs(imx334, raw12_framefmt_regs, |
| ARRAY_SIZE(raw12_framefmt_regs)); |
| } |
| |
| return -EINVAL; |
| } |
| |
| /** |
| * imx334_start_streaming() - Start sensor stream |
| * @imx334: pointer to imx334 device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_start_streaming(struct imx334 *imx334) |
| { |
| const struct imx334_reg_list *reg_list; |
| int ret; |
| |
| /* Write sensor mode registers */ |
| reg_list = &imx334->cur_mode->reg_list; |
| ret = imx334_write_regs(imx334, reg_list->regs, |
| reg_list->num_of_regs); |
| if (ret) { |
| dev_err(imx334->dev, "fail to write initial registers"); |
| return ret; |
| } |
| |
| ret = imx334_set_framefmt(imx334); |
| if (ret) { |
| dev_err(imx334->dev, "%s failed to set frame format: %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| /* Setup handler will write actual exposure and gain */ |
| ret = __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler); |
| if (ret) { |
| dev_err(imx334->dev, "fail to setup handler"); |
| return ret; |
| } |
| |
| /* Start streaming */ |
| ret = imx334_write_reg(imx334, IMX334_REG_MODE_SELECT, |
| 1, IMX334_MODE_STREAMING); |
| if (ret) { |
| dev_err(imx334->dev, "fail to start streaming"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * imx334_stop_streaming() - Stop sensor stream |
| * @imx334: pointer to imx334 device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_stop_streaming(struct imx334 *imx334) |
| { |
| return imx334_write_reg(imx334, IMX334_REG_MODE_SELECT, |
| 1, IMX334_MODE_STANDBY); |
| } |
| |
| /** |
| * imx334_set_stream() - Enable sensor streaming |
| * @sd: pointer to imx334 subdevice |
| * @enable: set to enable sensor streaming |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_set_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct imx334 *imx334 = to_imx334(sd); |
| int ret; |
| |
| mutex_lock(&imx334->mutex); |
| |
| if (enable) { |
| ret = pm_runtime_resume_and_get(imx334->dev); |
| if (ret < 0) |
| goto error_unlock; |
| |
| ret = imx334_start_streaming(imx334); |
| if (ret) |
| goto error_power_off; |
| } else { |
| imx334_stop_streaming(imx334); |
| pm_runtime_put(imx334->dev); |
| } |
| |
| mutex_unlock(&imx334->mutex); |
| |
| return 0; |
| |
| error_power_off: |
| pm_runtime_put(imx334->dev); |
| error_unlock: |
| mutex_unlock(&imx334->mutex); |
| |
| return ret; |
| } |
| |
| /** |
| * imx334_detect() - Detect imx334 sensor |
| * @imx334: pointer to imx334 device |
| * |
| * Return: 0 if successful, -EIO if sensor id does not match |
| */ |
| static int imx334_detect(struct imx334 *imx334) |
| { |
| int ret; |
| u32 val; |
| |
| ret = imx334_read_reg(imx334, IMX334_REG_ID, 2, &val); |
| if (ret) |
| return ret; |
| |
| if (val != IMX334_ID) { |
| dev_err(imx334->dev, "chip id mismatch: %x!=%x", |
| IMX334_ID, val); |
| return -ENXIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * imx334_parse_hw_config() - Parse HW configuration and check if supported |
| * @imx334: pointer to imx334 device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_parse_hw_config(struct imx334 *imx334) |
| { |
| struct fwnode_handle *fwnode = dev_fwnode(imx334->dev); |
| struct v4l2_fwnode_endpoint bus_cfg = { |
| .bus_type = V4L2_MBUS_CSI2_DPHY |
| }; |
| struct fwnode_handle *ep; |
| unsigned long rate; |
| unsigned int i, j; |
| int ret; |
| |
| if (!fwnode) |
| return -ENXIO; |
| |
| /* Request optional reset pin */ |
| imx334->reset_gpio = devm_gpiod_get_optional(imx334->dev, "reset", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(imx334->reset_gpio)) { |
| dev_err(imx334->dev, "failed to get reset gpio %ld", |
| PTR_ERR(imx334->reset_gpio)); |
| return PTR_ERR(imx334->reset_gpio); |
| } |
| |
| /* Get sensor input clock */ |
| imx334->inclk = devm_clk_get(imx334->dev, NULL); |
| if (IS_ERR(imx334->inclk)) { |
| dev_err(imx334->dev, "could not get inclk"); |
| return PTR_ERR(imx334->inclk); |
| } |
| |
| rate = clk_get_rate(imx334->inclk); |
| if (rate != IMX334_INCLK_RATE) { |
| dev_err(imx334->dev, "inclk frequency mismatch"); |
| return -EINVAL; |
| } |
| |
| ep = fwnode_graph_get_next_endpoint(fwnode, NULL); |
| if (!ep) |
| return -ENXIO; |
| |
| ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); |
| fwnode_handle_put(ep); |
| if (ret) |
| return ret; |
| |
| if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX334_NUM_DATA_LANES) { |
| dev_err(imx334->dev, |
| "number of CSI2 data lanes %d is not supported", |
| bus_cfg.bus.mipi_csi2.num_data_lanes); |
| ret = -EINVAL; |
| goto done_endpoint_free; |
| } |
| |
| if (!bus_cfg.nr_of_link_frequencies) { |
| dev_err(imx334->dev, "no link frequencies defined"); |
| ret = -EINVAL; |
| goto done_endpoint_free; |
| } |
| |
| for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) { |
| for (j = 0; j < ARRAY_SIZE(link_freq); j++) { |
| if (bus_cfg.link_frequencies[i] == link_freq[j]) { |
| set_bit(j, &imx334->menu_skip_mask); |
| break; |
| } |
| } |
| |
| if (j == ARRAY_SIZE(link_freq)) { |
| ret = dev_err_probe(imx334->dev, -EINVAL, |
| "no supported link freq found\n"); |
| goto done_endpoint_free; |
| } |
| } |
| |
| done_endpoint_free: |
| v4l2_fwnode_endpoint_free(&bus_cfg); |
| |
| return ret; |
| } |
| |
| /* V4l2 subdevice ops */ |
| static const struct v4l2_subdev_video_ops imx334_video_ops = { |
| .s_stream = imx334_set_stream, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops imx334_pad_ops = { |
| .enum_mbus_code = imx334_enum_mbus_code, |
| .enum_frame_size = imx334_enum_frame_size, |
| .get_fmt = imx334_get_pad_format, |
| .set_fmt = imx334_set_pad_format, |
| }; |
| |
| static const struct v4l2_subdev_ops imx334_subdev_ops = { |
| .video = &imx334_video_ops, |
| .pad = &imx334_pad_ops, |
| }; |
| |
| static const struct v4l2_subdev_internal_ops imx334_internal_ops = { |
| .init_state = imx334_init_state, |
| }; |
| |
| /** |
| * imx334_power_on() - Sensor power on sequence |
| * @dev: pointer to i2c device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_power_on(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct imx334 *imx334 = to_imx334(sd); |
| int ret; |
| |
| gpiod_set_value_cansleep(imx334->reset_gpio, 1); |
| |
| ret = clk_prepare_enable(imx334->inclk); |
| if (ret) { |
| dev_err(imx334->dev, "fail to enable inclk"); |
| goto error_reset; |
| } |
| |
| usleep_range(18000, 20000); |
| |
| return 0; |
| |
| error_reset: |
| gpiod_set_value_cansleep(imx334->reset_gpio, 0); |
| |
| return ret; |
| } |
| |
| /** |
| * imx334_power_off() - Sensor power off sequence |
| * @dev: pointer to i2c device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_power_off(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct imx334 *imx334 = to_imx334(sd); |
| |
| gpiod_set_value_cansleep(imx334->reset_gpio, 0); |
| |
| clk_disable_unprepare(imx334->inclk); |
| |
| return 0; |
| } |
| |
| /** |
| * imx334_init_controls() - Initialize sensor subdevice controls |
| * @imx334: pointer to imx334 device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_init_controls(struct imx334 *imx334) |
| { |
| struct v4l2_ctrl_handler *ctrl_hdlr = &imx334->ctrl_handler; |
| const struct imx334_mode *mode = imx334->cur_mode; |
| u32 lpfr; |
| int ret; |
| |
| ret = v4l2_ctrl_handler_init(ctrl_hdlr, 7); |
| if (ret) |
| return ret; |
| |
| /* Serialize controls with sensor device */ |
| ctrl_hdlr->lock = &imx334->mutex; |
| |
| /* Initialize exposure and gain */ |
| lpfr = mode->vblank + mode->height; |
| imx334->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, |
| &imx334_ctrl_ops, |
| V4L2_CID_EXPOSURE, |
| IMX334_EXPOSURE_MIN, |
| lpfr - IMX334_EXPOSURE_OFFSET, |
| IMX334_EXPOSURE_STEP, |
| IMX334_EXPOSURE_DEFAULT); |
| |
| imx334->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, |
| &imx334_ctrl_ops, |
| V4L2_CID_ANALOGUE_GAIN, |
| IMX334_AGAIN_MIN, |
| IMX334_AGAIN_MAX, |
| IMX334_AGAIN_STEP, |
| IMX334_AGAIN_DEFAULT); |
| |
| v4l2_ctrl_cluster(2, &imx334->exp_ctrl); |
| |
| imx334->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, |
| &imx334_ctrl_ops, |
| V4L2_CID_VBLANK, |
| mode->vblank_min, |
| mode->vblank_max, |
| 1, mode->vblank); |
| |
| /* Read only controls */ |
| imx334->pclk_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, |
| &imx334_ctrl_ops, |
| V4L2_CID_PIXEL_RATE, |
| mode->pclk, mode->pclk, |
| 1, mode->pclk); |
| |
| imx334->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr, |
| &imx334_ctrl_ops, |
| V4L2_CID_LINK_FREQ, |
| __fls(imx334->menu_skip_mask), |
| __ffs(imx334->menu_skip_mask), |
| link_freq); |
| |
| if (imx334->link_freq_ctrl) |
| imx334->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| imx334->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, |
| &imx334_ctrl_ops, |
| V4L2_CID_HBLANK, |
| IMX334_REG_MIN, |
| IMX334_REG_MAX, |
| 1, mode->hblank); |
| if (imx334->hblank_ctrl) |
| imx334->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx334_ctrl_ops, |
| V4L2_CID_TEST_PATTERN, |
| ARRAY_SIZE(imx334_test_pattern_menu) - 1, |
| 0, 0, imx334_test_pattern_menu); |
| |
| if (ctrl_hdlr->error) { |
| dev_err(imx334->dev, "control init failed: %d", |
| ctrl_hdlr->error); |
| v4l2_ctrl_handler_free(ctrl_hdlr); |
| return ctrl_hdlr->error; |
| } |
| |
| imx334->sd.ctrl_handler = ctrl_hdlr; |
| |
| return 0; |
| } |
| |
| /** |
| * imx334_probe() - I2C client device binding |
| * @client: pointer to i2c client device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx334_probe(struct i2c_client *client) |
| { |
| struct imx334 *imx334; |
| int ret; |
| |
| imx334 = devm_kzalloc(&client->dev, sizeof(*imx334), GFP_KERNEL); |
| if (!imx334) |
| return -ENOMEM; |
| |
| imx334->dev = &client->dev; |
| |
| /* Initialize subdev */ |
| v4l2_i2c_subdev_init(&imx334->sd, client, &imx334_subdev_ops); |
| imx334->sd.internal_ops = &imx334_internal_ops; |
| |
| ret = imx334_parse_hw_config(imx334); |
| if (ret) { |
| dev_err(imx334->dev, "HW configuration is not supported"); |
| return ret; |
| } |
| |
| mutex_init(&imx334->mutex); |
| |
| ret = imx334_power_on(imx334->dev); |
| if (ret) { |
| dev_err(imx334->dev, "failed to power-on the sensor"); |
| goto error_mutex_destroy; |
| } |
| |
| /* Check module identity */ |
| ret = imx334_detect(imx334); |
| if (ret) { |
| dev_err(imx334->dev, "failed to find sensor: %d", ret); |
| goto error_power_off; |
| } |
| |
| /* Set default mode to max resolution */ |
| imx334->cur_mode = &supported_modes[__ffs(imx334->menu_skip_mask)]; |
| imx334->cur_code = imx334_mbus_codes[0]; |
| imx334->vblank = imx334->cur_mode->vblank; |
| |
| ret = imx334_init_controls(imx334); |
| if (ret) { |
| dev_err(imx334->dev, "failed to init controls: %d", ret); |
| goto error_power_off; |
| } |
| |
| /* Initialize subdev */ |
| imx334->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| imx334->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| |
| /* Initialize source pad */ |
| imx334->pad.flags = MEDIA_PAD_FL_SOURCE; |
| ret = media_entity_pads_init(&imx334->sd.entity, 1, &imx334->pad); |
| if (ret) { |
| dev_err(imx334->dev, "failed to init entity pads: %d", ret); |
| goto error_handler_free; |
| } |
| |
| ret = v4l2_async_register_subdev_sensor(&imx334->sd); |
| if (ret < 0) { |
| dev_err(imx334->dev, |
| "failed to register async subdev: %d", ret); |
| goto error_media_entity; |
| } |
| |
| pm_runtime_set_active(imx334->dev); |
| pm_runtime_enable(imx334->dev); |
| pm_runtime_idle(imx334->dev); |
| |
| return 0; |
| |
| error_media_entity: |
| media_entity_cleanup(&imx334->sd.entity); |
| error_handler_free: |
| v4l2_ctrl_handler_free(imx334->sd.ctrl_handler); |
| error_power_off: |
| imx334_power_off(imx334->dev); |
| error_mutex_destroy: |
| mutex_destroy(&imx334->mutex); |
| |
| return ret; |
| } |
| |
| /** |
| * imx334_remove() - I2C client device unbinding |
| * @client: pointer to I2C client device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static void imx334_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct imx334 *imx334 = to_imx334(sd); |
| |
| v4l2_async_unregister_subdev(sd); |
| media_entity_cleanup(&sd->entity); |
| v4l2_ctrl_handler_free(sd->ctrl_handler); |
| |
| pm_runtime_disable(&client->dev); |
| pm_runtime_suspended(&client->dev); |
| |
| mutex_destroy(&imx334->mutex); |
| } |
| |
| static const struct dev_pm_ops imx334_pm_ops = { |
| SET_RUNTIME_PM_OPS(imx334_power_off, imx334_power_on, NULL) |
| }; |
| |
| static const struct of_device_id imx334_of_match[] = { |
| { .compatible = "sony,imx334" }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(of, imx334_of_match); |
| |
| static struct i2c_driver imx334_driver = { |
| .probe = imx334_probe, |
| .remove = imx334_remove, |
| .driver = { |
| .name = "imx334", |
| .pm = &imx334_pm_ops, |
| .of_match_table = imx334_of_match, |
| }, |
| }; |
| |
| module_i2c_driver(imx334_driver); |
| |
| MODULE_DESCRIPTION("Sony imx334 sensor driver"); |
| MODULE_LICENSE("GPL"); |