| /* |
| * TI CPUFreq/OPP hw-supported driver |
| * |
| * Copyright (C) 2016-2017 Texas Instruments, Inc. |
| * Dave Gerlach <d-gerlach@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/cpu.h> |
| #include <linux/io.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/init.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/pm_opp.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| #define REVISION_MASK 0xF |
| #define REVISION_SHIFT 28 |
| |
| #define AM33XX_800M_ARM_MPU_MAX_FREQ 0x1E2F |
| #define AM43XX_600M_ARM_MPU_MAX_FREQ 0xFFA |
| |
| #define DRA7_EFUSE_HAS_OD_MPU_OPP 11 |
| #define DRA7_EFUSE_HAS_HIGH_MPU_OPP 15 |
| #define DRA7_EFUSE_HAS_ALL_MPU_OPP 23 |
| |
| #define DRA7_EFUSE_NOM_MPU_OPP BIT(0) |
| #define DRA7_EFUSE_OD_MPU_OPP BIT(1) |
| #define DRA7_EFUSE_HIGH_MPU_OPP BIT(2) |
| |
| #define VERSION_COUNT 2 |
| |
| struct ti_cpufreq_data; |
| |
| struct ti_cpufreq_soc_data { |
| unsigned long (*efuse_xlate)(struct ti_cpufreq_data *opp_data, |
| unsigned long efuse); |
| unsigned long efuse_fallback; |
| unsigned long efuse_offset; |
| unsigned long efuse_mask; |
| unsigned long efuse_shift; |
| unsigned long rev_offset; |
| }; |
| |
| struct ti_cpufreq_data { |
| struct device *cpu_dev; |
| struct device_node *opp_node; |
| struct regmap *syscon; |
| const struct ti_cpufreq_soc_data *soc_data; |
| }; |
| |
| static unsigned long amx3_efuse_xlate(struct ti_cpufreq_data *opp_data, |
| unsigned long efuse) |
| { |
| if (!efuse) |
| efuse = opp_data->soc_data->efuse_fallback; |
| /* AM335x and AM437x use "OPP disable" bits, so invert */ |
| return ~efuse; |
| } |
| |
| static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data, |
| unsigned long efuse) |
| { |
| unsigned long calculated_efuse = DRA7_EFUSE_NOM_MPU_OPP; |
| |
| /* |
| * The efuse on dra7 and am57 parts contains a specific |
| * value indicating the highest available OPP. |
| */ |
| |
| switch (efuse) { |
| case DRA7_EFUSE_HAS_ALL_MPU_OPP: |
| case DRA7_EFUSE_HAS_HIGH_MPU_OPP: |
| calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP; |
| case DRA7_EFUSE_HAS_OD_MPU_OPP: |
| calculated_efuse |= DRA7_EFUSE_OD_MPU_OPP; |
| } |
| |
| return calculated_efuse; |
| } |
| |
| static struct ti_cpufreq_soc_data am3x_soc_data = { |
| .efuse_xlate = amx3_efuse_xlate, |
| .efuse_fallback = AM33XX_800M_ARM_MPU_MAX_FREQ, |
| .efuse_offset = 0x07fc, |
| .efuse_mask = 0x1fff, |
| .rev_offset = 0x600, |
| }; |
| |
| static struct ti_cpufreq_soc_data am4x_soc_data = { |
| .efuse_xlate = amx3_efuse_xlate, |
| .efuse_fallback = AM43XX_600M_ARM_MPU_MAX_FREQ, |
| .efuse_offset = 0x0610, |
| .efuse_mask = 0x3f, |
| .rev_offset = 0x600, |
| }; |
| |
| static struct ti_cpufreq_soc_data dra7_soc_data = { |
| .efuse_xlate = dra7_efuse_xlate, |
| .efuse_offset = 0x020c, |
| .efuse_mask = 0xf80000, |
| .efuse_shift = 19, |
| .rev_offset = 0x204, |
| }; |
| |
| /** |
| * ti_cpufreq_get_efuse() - Parse and return efuse value present on SoC |
| * @opp_data: pointer to ti_cpufreq_data context |
| * @efuse_value: Set to the value parsed from efuse |
| * |
| * Returns error code if efuse not read properly. |
| */ |
| static int ti_cpufreq_get_efuse(struct ti_cpufreq_data *opp_data, |
| u32 *efuse_value) |
| { |
| struct device *dev = opp_data->cpu_dev; |
| u32 efuse; |
| int ret; |
| |
| ret = regmap_read(opp_data->syscon, opp_data->soc_data->efuse_offset, |
| &efuse); |
| if (ret) { |
| dev_err(dev, |
| "Failed to read the efuse value from syscon: %d\n", |
| ret); |
| return ret; |
| } |
| |
| efuse = (efuse & opp_data->soc_data->efuse_mask); |
| efuse >>= opp_data->soc_data->efuse_shift; |
| |
| *efuse_value = opp_data->soc_data->efuse_xlate(opp_data, efuse); |
| |
| return 0; |
| } |
| |
| /** |
| * ti_cpufreq_get_rev() - Parse and return rev value present on SoC |
| * @opp_data: pointer to ti_cpufreq_data context |
| * @revision_value: Set to the value parsed from revision register |
| * |
| * Returns error code if revision not read properly. |
| */ |
| static int ti_cpufreq_get_rev(struct ti_cpufreq_data *opp_data, |
| u32 *revision_value) |
| { |
| struct device *dev = opp_data->cpu_dev; |
| u32 revision; |
| int ret; |
| |
| ret = regmap_read(opp_data->syscon, opp_data->soc_data->rev_offset, |
| &revision); |
| if (ret) { |
| dev_err(dev, |
| "Failed to read the revision number from syscon: %d\n", |
| ret); |
| return ret; |
| } |
| |
| *revision_value = BIT((revision >> REVISION_SHIFT) & REVISION_MASK); |
| |
| return 0; |
| } |
| |
| static int ti_cpufreq_setup_syscon_register(struct ti_cpufreq_data *opp_data) |
| { |
| struct device *dev = opp_data->cpu_dev; |
| struct device_node *np = opp_data->opp_node; |
| |
| opp_data->syscon = syscon_regmap_lookup_by_phandle(np, |
| "syscon"); |
| if (IS_ERR(opp_data->syscon)) { |
| dev_err(dev, |
| "\"syscon\" is missing, cannot use OPPv2 table.\n"); |
| return PTR_ERR(opp_data->syscon); |
| } |
| |
| return 0; |
| } |
| |
| static const struct of_device_id ti_cpufreq_of_match[] = { |
| { .compatible = "ti,am33xx", .data = &am3x_soc_data, }, |
| { .compatible = "ti,am43", .data = &am4x_soc_data, }, |
| { .compatible = "ti,dra7", .data = &dra7_soc_data }, |
| {}, |
| }; |
| |
| static int ti_cpufreq_init(void) |
| { |
| u32 version[VERSION_COUNT]; |
| struct device_node *np; |
| const struct of_device_id *match; |
| struct ti_cpufreq_data *opp_data; |
| int ret; |
| |
| np = of_find_node_by_path("/"); |
| match = of_match_node(ti_cpufreq_of_match, np); |
| of_node_put(np); |
| if (!match) |
| return -ENODEV; |
| |
| opp_data = kzalloc(sizeof(*opp_data), GFP_KERNEL); |
| if (!opp_data) |
| return -ENOMEM; |
| |
| opp_data->soc_data = match->data; |
| |
| opp_data->cpu_dev = get_cpu_device(0); |
| if (!opp_data->cpu_dev) { |
| pr_err("%s: Failed to get device for CPU0\n", __func__); |
| ret = ENODEV; |
| goto free_opp_data; |
| } |
| |
| opp_data->opp_node = dev_pm_opp_of_get_opp_desc_node(opp_data->cpu_dev); |
| if (!opp_data->opp_node) { |
| dev_info(opp_data->cpu_dev, |
| "OPP-v2 not supported, cpufreq-dt will attempt to use legacy tables.\n"); |
| goto register_cpufreq_dt; |
| } |
| |
| ret = ti_cpufreq_setup_syscon_register(opp_data); |
| if (ret) |
| goto fail_put_node; |
| |
| /* |
| * OPPs determine whether or not they are supported based on |
| * two metrics: |
| * 0 - SoC Revision |
| * 1 - eFuse value |
| */ |
| ret = ti_cpufreq_get_rev(opp_data, &version[0]); |
| if (ret) |
| goto fail_put_node; |
| |
| ret = ti_cpufreq_get_efuse(opp_data, &version[1]); |
| if (ret) |
| goto fail_put_node; |
| |
| ret = PTR_ERR_OR_ZERO(dev_pm_opp_set_supported_hw(opp_data->cpu_dev, |
| version, VERSION_COUNT)); |
| if (ret) { |
| dev_err(opp_data->cpu_dev, |
| "Failed to set supported hardware\n"); |
| goto fail_put_node; |
| } |
| |
| of_node_put(opp_data->opp_node); |
| |
| register_cpufreq_dt: |
| platform_device_register_simple("cpufreq-dt", -1, NULL, 0); |
| |
| return 0; |
| |
| fail_put_node: |
| of_node_put(opp_data->opp_node); |
| free_opp_data: |
| kfree(opp_data); |
| |
| return ret; |
| } |
| device_initcall(ti_cpufreq_init); |