| /* |
| * ARConnect IP Support (Multi core enabler: Cross core IPI, RTC ...) |
| * |
| * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef __SOC_ARC_MCIP_H |
| #define __SOC_ARC_MCIP_H |
| |
| #include <soc/arc/aux.h> |
| |
| #define ARC_REG_MCIP_BCR 0x0d0 |
| #define ARC_REG_MCIP_CMD 0x600 |
| #define ARC_REG_MCIP_WDATA 0x601 |
| #define ARC_REG_MCIP_READBACK 0x602 |
| |
| struct mcip_cmd { |
| #ifdef CONFIG_CPU_BIG_ENDIAN |
| unsigned int pad:8, param:16, cmd:8; |
| #else |
| unsigned int cmd:8, param:16, pad:8; |
| #endif |
| |
| #define CMD_INTRPT_GENERATE_IRQ 0x01 |
| #define CMD_INTRPT_GENERATE_ACK 0x02 |
| #define CMD_INTRPT_READ_STATUS 0x03 |
| #define CMD_INTRPT_CHECK_SOURCE 0x04 |
| |
| /* Semaphore Commands */ |
| #define CMD_SEMA_CLAIM_AND_READ 0x11 |
| #define CMD_SEMA_RELEASE 0x12 |
| |
| #define CMD_DEBUG_SET_MASK 0x34 |
| #define CMD_DEBUG_SET_SELECT 0x36 |
| |
| #define CMD_GFRC_READ_LO 0x42 |
| #define CMD_GFRC_READ_HI 0x43 |
| |
| #define CMD_IDU_ENABLE 0x71 |
| #define CMD_IDU_DISABLE 0x72 |
| #define CMD_IDU_SET_MODE 0x74 |
| #define CMD_IDU_SET_DEST 0x76 |
| #define CMD_IDU_SET_MASK 0x7C |
| |
| #define IDU_M_TRIG_LEVEL 0x0 |
| #define IDU_M_TRIG_EDGE 0x1 |
| |
| #define IDU_M_DISTRI_RR 0x0 |
| #define IDU_M_DISTRI_DEST 0x2 |
| }; |
| |
| struct mcip_bcr { |
| #ifdef CONFIG_CPU_BIG_ENDIAN |
| unsigned int pad3:8, |
| idu:1, llm:1, num_cores:6, |
| iocoh:1, gfrc:1, dbg:1, pad2:1, |
| msg:1, sem:1, ipi:1, pad:1, |
| ver:8; |
| #else |
| unsigned int ver:8, |
| pad:1, ipi:1, sem:1, msg:1, |
| pad2:1, dbg:1, gfrc:1, iocoh:1, |
| num_cores:6, llm:1, idu:1, |
| pad3:8; |
| #endif |
| }; |
| |
| /* |
| * MCIP programming model |
| * |
| * - Simple commands write {cmd:8,param:16} to MCIP_CMD aux reg |
| * (param could be irq, common_irq, core_id ...) |
| * - More involved commands setup MCIP_WDATA with cmd specific data |
| * before invoking the simple command |
| */ |
| static inline void __mcip_cmd(unsigned int cmd, unsigned int param) |
| { |
| struct mcip_cmd buf; |
| |
| buf.pad = 0; |
| buf.cmd = cmd; |
| buf.param = param; |
| |
| WRITE_AUX(ARC_REG_MCIP_CMD, buf); |
| } |
| |
| /* |
| * Setup additional data for a cmd |
| * Callers need to lock to ensure atomicity |
| */ |
| static inline void __mcip_cmd_data(unsigned int cmd, unsigned int param, |
| unsigned int data) |
| { |
| write_aux_reg(ARC_REG_MCIP_WDATA, data); |
| |
| __mcip_cmd(cmd, param); |
| } |
| |
| #endif |