| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * HID Driver for ELAN Touchpad |
| * |
| * Currently only supports touchpad found on HP Pavilion X2 10 |
| * |
| * Copyright (c) 2016 Alexandrov Stanislav <neko@nya.ai> |
| */ |
| |
| #include <linux/hid.h> |
| #include <linux/input/mt.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| |
| #include "hid-ids.h" |
| |
| #define ELAN_MT_I2C 0x5d |
| #define ELAN_SINGLE_FINGER 0x81 |
| #define ELAN_MT_FIRST_FINGER 0x82 |
| #define ELAN_MT_SECOND_FINGER 0x83 |
| #define ELAN_INPUT_REPORT_SIZE 8 |
| #define ELAN_I2C_REPORT_SIZE 32 |
| #define ELAN_FINGER_DATA_LEN 5 |
| #define ELAN_MAX_FINGERS 5 |
| #define ELAN_MAX_PRESSURE 255 |
| #define ELAN_TP_USB_INTF 1 |
| |
| #define ELAN_FEATURE_REPORT 0x0d |
| #define ELAN_FEATURE_SIZE 5 |
| #define ELAN_PARAM_MAX_X 6 |
| #define ELAN_PARAM_MAX_Y 7 |
| #define ELAN_PARAM_RES 8 |
| |
| #define ELAN_MUTE_LED_REPORT 0xBC |
| #define ELAN_LED_REPORT_SIZE 8 |
| |
| #define ELAN_HAS_LED BIT(0) |
| |
| struct elan_drvdata { |
| struct input_dev *input; |
| u8 prev_report[ELAN_INPUT_REPORT_SIZE]; |
| struct led_classdev mute_led; |
| u8 mute_led_state; |
| u16 max_x; |
| u16 max_y; |
| u16 res_x; |
| u16 res_y; |
| }; |
| |
| static int is_not_elan_touchpad(struct hid_device *hdev) |
| { |
| if (hid_is_usb(hdev)) { |
| struct usb_interface *intf = to_usb_interface(hdev->dev.parent); |
| |
| return (intf->altsetting->desc.bInterfaceNumber != |
| ELAN_TP_USB_INTF); |
| } |
| |
| return 0; |
| } |
| |
| static int elan_input_mapping(struct hid_device *hdev, struct hid_input *hi, |
| struct hid_field *field, struct hid_usage *usage, |
| unsigned long **bit, int *max) |
| { |
| if (is_not_elan_touchpad(hdev)) |
| return 0; |
| |
| if (field->report->id == ELAN_SINGLE_FINGER || |
| field->report->id == ELAN_MT_FIRST_FINGER || |
| field->report->id == ELAN_MT_SECOND_FINGER || |
| field->report->id == ELAN_MT_I2C) |
| return -1; |
| |
| return 0; |
| } |
| |
| static int elan_get_device_param(struct hid_device *hdev, |
| unsigned char *dmabuf, unsigned char param) |
| { |
| int ret; |
| |
| dmabuf[0] = ELAN_FEATURE_REPORT; |
| dmabuf[1] = 0x05; |
| dmabuf[2] = 0x03; |
| dmabuf[3] = param; |
| dmabuf[4] = 0x01; |
| |
| ret = hid_hw_raw_request(hdev, ELAN_FEATURE_REPORT, dmabuf, |
| ELAN_FEATURE_SIZE, HID_FEATURE_REPORT, |
| HID_REQ_SET_REPORT); |
| if (ret != ELAN_FEATURE_SIZE) { |
| hid_err(hdev, "Set report error for parm %d: %d\n", param, ret); |
| return ret; |
| } |
| |
| ret = hid_hw_raw_request(hdev, ELAN_FEATURE_REPORT, dmabuf, |
| ELAN_FEATURE_SIZE, HID_FEATURE_REPORT, |
| HID_REQ_GET_REPORT); |
| if (ret != ELAN_FEATURE_SIZE) { |
| hid_err(hdev, "Get report error for parm %d: %d\n", param, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static unsigned int elan_convert_res(char val) |
| { |
| /* |
| * (value from firmware) * 10 + 790 = dpi |
| * dpi * 10 / 254 = dots/mm |
| */ |
| return (val * 10 + 790) * 10 / 254; |
| } |
| |
| static int elan_get_device_params(struct hid_device *hdev) |
| { |
| struct elan_drvdata *drvdata = hid_get_drvdata(hdev); |
| unsigned char *dmabuf; |
| int ret; |
| |
| dmabuf = kmalloc(ELAN_FEATURE_SIZE, GFP_KERNEL); |
| if (!dmabuf) |
| return -ENOMEM; |
| |
| ret = elan_get_device_param(hdev, dmabuf, ELAN_PARAM_MAX_X); |
| if (ret) |
| goto err; |
| |
| drvdata->max_x = (dmabuf[4] << 8) | dmabuf[3]; |
| |
| ret = elan_get_device_param(hdev, dmabuf, ELAN_PARAM_MAX_Y); |
| if (ret) |
| goto err; |
| |
| drvdata->max_y = (dmabuf[4] << 8) | dmabuf[3]; |
| |
| ret = elan_get_device_param(hdev, dmabuf, ELAN_PARAM_RES); |
| if (ret) |
| goto err; |
| |
| drvdata->res_x = elan_convert_res(dmabuf[3]); |
| drvdata->res_y = elan_convert_res(dmabuf[4]); |
| |
| err: |
| kfree(dmabuf); |
| return ret; |
| } |
| |
| static int elan_input_configured(struct hid_device *hdev, struct hid_input *hi) |
| { |
| int ret; |
| struct input_dev *input; |
| struct elan_drvdata *drvdata = hid_get_drvdata(hdev); |
| |
| if (is_not_elan_touchpad(hdev)) |
| return 0; |
| |
| ret = elan_get_device_params(hdev); |
| if (ret) |
| return ret; |
| |
| input = devm_input_allocate_device(&hdev->dev); |
| if (!input) |
| return -ENOMEM; |
| |
| input->name = "Elan Touchpad"; |
| input->phys = hdev->phys; |
| input->uniq = hdev->uniq; |
| input->id.bustype = hdev->bus; |
| input->id.vendor = hdev->vendor; |
| input->id.product = hdev->product; |
| input->id.version = hdev->version; |
| input->dev.parent = &hdev->dev; |
| |
| input_set_abs_params(input, ABS_MT_POSITION_X, 0, drvdata->max_x, |
| 0, 0); |
| input_set_abs_params(input, ABS_MT_POSITION_Y, 0, drvdata->max_y, |
| 0, 0); |
| input_set_abs_params(input, ABS_MT_PRESSURE, 0, ELAN_MAX_PRESSURE, |
| 0, 0); |
| |
| __set_bit(BTN_LEFT, input->keybit); |
| __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); |
| |
| ret = input_mt_init_slots(input, ELAN_MAX_FINGERS, INPUT_MT_POINTER); |
| if (ret) { |
| hid_err(hdev, "Failed to init elan MT slots: %d\n", ret); |
| input_free_device(input); |
| return ret; |
| } |
| |
| input_abs_set_res(input, ABS_X, drvdata->res_x); |
| input_abs_set_res(input, ABS_Y, drvdata->res_y); |
| |
| ret = input_register_device(input); |
| if (ret) { |
| hid_err(hdev, "Failed to register elan input device: %d\n", |
| ret); |
| input_mt_destroy_slots(input); |
| input_free_device(input); |
| return ret; |
| } |
| |
| drvdata->input = input; |
| |
| return 0; |
| } |
| |
| static void elan_report_mt_slot(struct elan_drvdata *drvdata, u8 *data, |
| unsigned int slot_num) |
| { |
| struct input_dev *input = drvdata->input; |
| int x, y, p; |
| |
| bool active = !!data; |
| |
| input_mt_slot(input, slot_num); |
| input_mt_report_slot_state(input, MT_TOOL_FINGER, active); |
| if (active) { |
| x = ((data[0] & 0xF0) << 4) | data[1]; |
| y = drvdata->max_y - |
| (((data[0] & 0x07) << 8) | data[2]); |
| p = data[4]; |
| |
| input_report_abs(input, ABS_MT_POSITION_X, x); |
| input_report_abs(input, ABS_MT_POSITION_Y, y); |
| input_report_abs(input, ABS_MT_PRESSURE, p); |
| } |
| } |
| |
| static void elan_usb_report_input(struct elan_drvdata *drvdata, u8 *data) |
| { |
| int i; |
| struct input_dev *input = drvdata->input; |
| |
| /* |
| * There is 3 types of reports: for single touch, |
| * for multitouch - first finger and for multitouch - second finger |
| * |
| * packet structure for ELAN_SINGLE_FINGER and ELAN_MT_FIRST_FINGER: |
| * |
| * byte 1: 1 0 0 0 0 0 0 1 // 0x81 or 0x82 |
| * byte 2: 0 0 0 0 0 0 0 0 // looks like unused |
| * byte 3: f5 f4 f3 f2 f1 0 0 L |
| * byte 4: x12 x11 x10 x9 0? y11 y10 y9 |
| * byte 5: x8 x7 x6 x5 x4 x3 x2 x1 |
| * byte 6: y8 y7 y6 y5 y4 y3 y2 y1 |
| * byte 7: sy4 sy3 sy2 sy1 sx4 sx3 sx2 sx1 |
| * byte 8: p8 p7 p6 p5 p4 p3 p2 p1 |
| * |
| * packet structure for ELAN_MT_SECOND_FINGER: |
| * |
| * byte 1: 1 0 0 0 0 0 1 1 // 0x83 |
| * byte 2: x12 x11 x10 x9 0 y11 y10 y9 |
| * byte 3: x8 x7 x6 x5 x4 x3 x2 x1 |
| * byte 4: y8 y7 y6 y5 y4 y3 y2 y1 |
| * byte 5: sy4 sy3 sy2 sy1 sx4 sx3 sx2 sx1 |
| * byte 6: p8 p7 p6 p5 p4 p3 p2 p1 |
| * byte 7: 0 0 0 0 0 0 0 0 |
| * byte 8: 0 0 0 0 0 0 0 0 |
| * |
| * f5-f1: finger touch bits |
| * L: clickpad button |
| * sy / sx: finger width / height expressed in traces, the total number |
| * of traces can be queried by doing a HID_REQ_SET_REPORT |
| * { 0x0d, 0x05, 0x03, 0x05, 0x01 } followed by a GET, in the |
| * returned buf, buf[3]=no-x-traces, buf[4]=no-y-traces. |
| * p: pressure |
| */ |
| |
| if (data[0] == ELAN_SINGLE_FINGER) { |
| for (i = 0; i < ELAN_MAX_FINGERS; i++) { |
| if (data[2] & BIT(i + 3)) |
| elan_report_mt_slot(drvdata, data + 3, i); |
| else |
| elan_report_mt_slot(drvdata, NULL, i); |
| } |
| input_report_key(input, BTN_LEFT, data[2] & 0x01); |
| } |
| /* |
| * When touched with two fingers Elan touchpad will emit two HID reports |
| * first is ELAN_MT_FIRST_FINGER and second is ELAN_MT_SECOND_FINGER |
| * we will save ELAN_MT_FIRST_FINGER report and wait for |
| * ELAN_MT_SECOND_FINGER to finish multitouch |
| */ |
| if (data[0] == ELAN_MT_FIRST_FINGER) { |
| memcpy(drvdata->prev_report, data, |
| sizeof(drvdata->prev_report)); |
| return; |
| } |
| |
| if (data[0] == ELAN_MT_SECOND_FINGER) { |
| int first = 0; |
| u8 *prev_report = drvdata->prev_report; |
| |
| if (prev_report[0] != ELAN_MT_FIRST_FINGER) |
| return; |
| |
| for (i = 0; i < ELAN_MAX_FINGERS; i++) { |
| if (prev_report[2] & BIT(i + 3)) { |
| if (!first) { |
| first = 1; |
| elan_report_mt_slot(drvdata, prev_report + 3, i); |
| } else { |
| elan_report_mt_slot(drvdata, data + 1, i); |
| } |
| } else { |
| elan_report_mt_slot(drvdata, NULL, i); |
| } |
| } |
| input_report_key(input, BTN_LEFT, prev_report[2] & 0x01); |
| } |
| |
| input_mt_sync_frame(input); |
| input_sync(input); |
| } |
| |
| static void elan_i2c_report_input(struct elan_drvdata *drvdata, u8 *data) |
| { |
| struct input_dev *input = drvdata->input; |
| u8 *finger_data; |
| int i; |
| |
| /* |
| * Elan MT touchpads in i2c mode send finger data in the same format |
| * as in USB mode, but then with all fingers in a single packet. |
| * |
| * packet structure for ELAN_MT_I2C: |
| * |
| * byte 1: 1 0 0 1 1 1 0 1 // 0x5d |
| * byte 2: f5 f4 f3 f2 f1 0 0 L |
| * byte 3: x12 x11 x10 x9 0? y11 y10 y9 |
| * byte 4: x8 x7 x6 x5 x4 x3 x2 x1 |
| * byte 5: y8 y7 y6 y5 y4 y3 y2 y1 |
| * byte 6: sy4 sy3 sy2 sy1 sx4 sx3 sx2 sx1 |
| * byte 7: p8 p7 p6 p5 p4 p3 p2 p1 |
| * byte 8-12: Same as byte 3-7 for second finger down |
| * byte 13-17: Same as byte 3-7 for third finger down |
| * byte 18-22: Same as byte 3-7 for fourth finger down |
| * byte 23-27: Same as byte 3-7 for fifth finger down |
| */ |
| |
| finger_data = data + 2; |
| for (i = 0; i < ELAN_MAX_FINGERS; i++) { |
| if (data[1] & BIT(i + 3)) { |
| elan_report_mt_slot(drvdata, finger_data, i); |
| finger_data += ELAN_FINGER_DATA_LEN; |
| } else { |
| elan_report_mt_slot(drvdata, NULL, i); |
| } |
| } |
| |
| input_report_key(input, BTN_LEFT, data[1] & 0x01); |
| input_mt_sync_frame(input); |
| input_sync(input); |
| } |
| |
| static int elan_raw_event(struct hid_device *hdev, |
| struct hid_report *report, u8 *data, int size) |
| { |
| struct elan_drvdata *drvdata = hid_get_drvdata(hdev); |
| |
| if (is_not_elan_touchpad(hdev)) |
| return 0; |
| |
| if (data[0] == ELAN_SINGLE_FINGER || |
| data[0] == ELAN_MT_FIRST_FINGER || |
| data[0] == ELAN_MT_SECOND_FINGER) { |
| if (size == ELAN_INPUT_REPORT_SIZE) { |
| elan_usb_report_input(drvdata, data); |
| return 1; |
| } |
| } |
| |
| if (data[0] == ELAN_MT_I2C && size == ELAN_I2C_REPORT_SIZE) { |
| elan_i2c_report_input(drvdata, data); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int elan_start_multitouch(struct hid_device *hdev) |
| { |
| int ret; |
| |
| /* |
| * This byte sequence will enable multitouch mode and disable |
| * mouse emulation |
| */ |
| static const unsigned char buf[] = { 0x0D, 0x00, 0x03, 0x21, 0x00 }; |
| unsigned char *dmabuf = kmemdup(buf, sizeof(buf), GFP_KERNEL); |
| |
| if (!dmabuf) |
| return -ENOMEM; |
| |
| ret = hid_hw_raw_request(hdev, dmabuf[0], dmabuf, sizeof(buf), |
| HID_FEATURE_REPORT, HID_REQ_SET_REPORT); |
| |
| kfree(dmabuf); |
| |
| if (ret != sizeof(buf)) { |
| hid_err(hdev, "Failed to start multitouch: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int elan_mute_led_set_brigtness(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| int ret; |
| u8 led_state; |
| struct device *dev = led_cdev->dev->parent; |
| struct hid_device *hdev = to_hid_device(dev); |
| struct elan_drvdata *drvdata = hid_get_drvdata(hdev); |
| |
| unsigned char *dmabuf = kzalloc(ELAN_LED_REPORT_SIZE, GFP_KERNEL); |
| |
| if (!dmabuf) |
| return -ENOMEM; |
| |
| led_state = !!value; |
| |
| dmabuf[0] = ELAN_MUTE_LED_REPORT; |
| dmabuf[1] = 0x02; |
| dmabuf[2] = led_state; |
| |
| ret = hid_hw_raw_request(hdev, dmabuf[0], dmabuf, ELAN_LED_REPORT_SIZE, |
| HID_FEATURE_REPORT, HID_REQ_SET_REPORT); |
| |
| kfree(dmabuf); |
| |
| if (ret != ELAN_LED_REPORT_SIZE) { |
| if (ret != -ENODEV) |
| hid_err(hdev, "Failed to set mute led brightness: %d\n", ret); |
| return ret < 0 ? ret : -EIO; |
| } |
| |
| drvdata->mute_led_state = led_state; |
| return 0; |
| } |
| |
| static int elan_init_mute_led(struct hid_device *hdev) |
| { |
| struct elan_drvdata *drvdata = hid_get_drvdata(hdev); |
| struct led_classdev *mute_led = &drvdata->mute_led; |
| |
| mute_led->name = "elan:red:mute"; |
| mute_led->default_trigger = "audio-mute"; |
| mute_led->brightness_set_blocking = elan_mute_led_set_brigtness; |
| mute_led->max_brightness = LED_ON; |
| mute_led->flags = LED_HW_PLUGGABLE; |
| mute_led->dev = &hdev->dev; |
| |
| return devm_led_classdev_register(&hdev->dev, mute_led); |
| } |
| |
| static int elan_probe(struct hid_device *hdev, const struct hid_device_id *id) |
| { |
| int ret; |
| struct elan_drvdata *drvdata; |
| |
| drvdata = devm_kzalloc(&hdev->dev, sizeof(*drvdata), GFP_KERNEL); |
| |
| if (!drvdata) |
| return -ENOMEM; |
| |
| hid_set_drvdata(hdev, drvdata); |
| |
| ret = hid_parse(hdev); |
| if (ret) { |
| hid_err(hdev, "Hid Parse failed\n"); |
| return ret; |
| } |
| |
| ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); |
| if (ret) { |
| hid_err(hdev, "Hid hw start failed\n"); |
| return ret; |
| } |
| |
| if (is_not_elan_touchpad(hdev)) |
| return 0; |
| |
| if (!drvdata->input) { |
| hid_err(hdev, "Input device is not registered\n"); |
| ret = -ENAVAIL; |
| goto err; |
| } |
| |
| ret = elan_start_multitouch(hdev); |
| if (ret) |
| goto err; |
| |
| if (id->driver_data & ELAN_HAS_LED) { |
| ret = elan_init_mute_led(hdev); |
| if (ret) |
| goto err; |
| } |
| |
| return 0; |
| err: |
| hid_hw_stop(hdev); |
| return ret; |
| } |
| |
| static void elan_remove(struct hid_device *hdev) |
| { |
| hid_hw_stop(hdev); |
| } |
| |
| static const struct hid_device_id elan_devices[] = { |
| { HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_HP_X2), |
| .driver_data = ELAN_HAS_LED }, |
| { HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_HP_X2_10_COVER), |
| .driver_data = ELAN_HAS_LED }, |
| { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_TOSHIBA_CLICK_L9W) }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(hid, elan_devices); |
| |
| static struct hid_driver elan_driver = { |
| .name = "elan", |
| .id_table = elan_devices, |
| .input_mapping = elan_input_mapping, |
| .input_configured = elan_input_configured, |
| .raw_event = elan_raw_event, |
| .probe = elan_probe, |
| .remove = elan_remove, |
| }; |
| |
| module_hid_driver(elan_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Alexandrov Stanislav"); |
| MODULE_DESCRIPTION("Driver for HID ELAN Touchpads"); |