| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * dwc3-imx8mp.c - NXP imx8mp Specific Glue layer |
| * |
| * Copyright (c) 2020 NXP. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| |
| #include "core.h" |
| |
| /* USB wakeup registers */ |
| #define USB_WAKEUP_CTRL 0x00 |
| |
| /* Global wakeup interrupt enable, also used to clear interrupt */ |
| #define USB_WAKEUP_EN BIT(31) |
| /* Wakeup from connect or disconnect, only for superspeed */ |
| #define USB_WAKEUP_SS_CONN BIT(5) |
| /* 0 select vbus_valid, 1 select sessvld */ |
| #define USB_WAKEUP_VBUS_SRC_SESS_VAL BIT(4) |
| /* Enable signal for wake up from u3 state */ |
| #define USB_WAKEUP_U3_EN BIT(3) |
| /* Enable signal for wake up from id change */ |
| #define USB_WAKEUP_ID_EN BIT(2) |
| /* Enable signal for wake up from vbus change */ |
| #define USB_WAKEUP_VBUS_EN BIT(1) |
| /* Enable signal for wake up from dp/dm change */ |
| #define USB_WAKEUP_DPDM_EN BIT(0) |
| |
| #define USB_WAKEUP_EN_MASK GENMASK(5, 0) |
| |
| /* USB glue registers */ |
| #define USB_CTRL0 0x00 |
| #define USB_CTRL1 0x04 |
| |
| #define USB_CTRL0_PORTPWR_EN BIT(12) /* 1 - PPC enabled (default) */ |
| #define USB_CTRL0_USB3_FIXED BIT(22) /* 1 - USB3 permanent attached */ |
| #define USB_CTRL0_USB2_FIXED BIT(23) /* 1 - USB2 permanent attached */ |
| |
| #define USB_CTRL1_OC_POLARITY BIT(16) /* 0 - HIGH / 1 - LOW */ |
| #define USB_CTRL1_PWR_POLARITY BIT(17) /* 0 - HIGH / 1 - LOW */ |
| |
| struct dwc3_imx8mp { |
| struct device *dev; |
| struct platform_device *dwc3; |
| void __iomem *hsio_blk_base; |
| void __iomem *glue_base; |
| struct clk *hsio_clk; |
| struct clk *suspend_clk; |
| int irq; |
| bool pm_suspended; |
| bool wakeup_pending; |
| }; |
| |
| static void imx8mp_configure_glue(struct dwc3_imx8mp *dwc3_imx) |
| { |
| struct device *dev = dwc3_imx->dev; |
| u32 value; |
| |
| if (!dwc3_imx->glue_base) |
| return; |
| |
| value = readl(dwc3_imx->glue_base + USB_CTRL0); |
| |
| if (device_property_read_bool(dev, "fsl,permanently-attached")) |
| value |= (USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED); |
| else |
| value &= ~(USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED); |
| |
| if (device_property_read_bool(dev, "fsl,disable-port-power-control")) |
| value &= ~(USB_CTRL0_PORTPWR_EN); |
| else |
| value |= USB_CTRL0_PORTPWR_EN; |
| |
| writel(value, dwc3_imx->glue_base + USB_CTRL0); |
| |
| value = readl(dwc3_imx->glue_base + USB_CTRL1); |
| if (device_property_read_bool(dev, "fsl,over-current-active-low")) |
| value |= USB_CTRL1_OC_POLARITY; |
| else |
| value &= ~USB_CTRL1_OC_POLARITY; |
| |
| if (device_property_read_bool(dev, "fsl,power-active-low")) |
| value |= USB_CTRL1_PWR_POLARITY; |
| else |
| value &= ~USB_CTRL1_PWR_POLARITY; |
| |
| writel(value, dwc3_imx->glue_base + USB_CTRL1); |
| } |
| |
| static void dwc3_imx8mp_wakeup_enable(struct dwc3_imx8mp *dwc3_imx) |
| { |
| struct dwc3 *dwc3 = platform_get_drvdata(dwc3_imx->dwc3); |
| u32 val; |
| |
| if (!dwc3) |
| return; |
| |
| val = readl(dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL); |
| |
| if ((dwc3->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc3->xhci) |
| val |= USB_WAKEUP_EN | USB_WAKEUP_SS_CONN | |
| USB_WAKEUP_U3_EN | USB_WAKEUP_DPDM_EN; |
| else if (dwc3->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE) |
| val |= USB_WAKEUP_EN | USB_WAKEUP_VBUS_EN | |
| USB_WAKEUP_VBUS_SRC_SESS_VAL; |
| |
| writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL); |
| } |
| |
| static void dwc3_imx8mp_wakeup_disable(struct dwc3_imx8mp *dwc3_imx) |
| { |
| u32 val; |
| |
| val = readl(dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL); |
| val &= ~(USB_WAKEUP_EN | USB_WAKEUP_EN_MASK); |
| writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL); |
| } |
| |
| static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx) |
| { |
| struct dwc3_imx8mp *dwc3_imx = _dwc3_imx; |
| struct dwc3 *dwc = platform_get_drvdata(dwc3_imx->dwc3); |
| |
| if (!dwc3_imx->pm_suspended) |
| return IRQ_HANDLED; |
| |
| disable_irq_nosync(dwc3_imx->irq); |
| dwc3_imx->wakeup_pending = true; |
| |
| if ((dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc->xhci) |
| pm_runtime_resume(&dwc->xhci->dev); |
| else if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE) |
| pm_runtime_get(dwc->dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int dwc3_imx8mp_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *dwc3_np, *node = dev->of_node; |
| struct dwc3_imx8mp *dwc3_imx; |
| struct resource *res; |
| int err, irq; |
| |
| if (!node) { |
| dev_err(dev, "device node not found\n"); |
| return -EINVAL; |
| } |
| |
| dwc3_imx = devm_kzalloc(dev, sizeof(*dwc3_imx), GFP_KERNEL); |
| if (!dwc3_imx) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, dwc3_imx); |
| |
| dwc3_imx->dev = dev; |
| |
| dwc3_imx->hsio_blk_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(dwc3_imx->hsio_blk_base)) |
| return PTR_ERR(dwc3_imx->hsio_blk_base); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (!res) { |
| dev_warn(dev, "Base address for glue layer missing. Continuing without, some features are missing though."); |
| } else { |
| dwc3_imx->glue_base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(dwc3_imx->glue_base)) |
| return PTR_ERR(dwc3_imx->glue_base); |
| } |
| |
| dwc3_imx->hsio_clk = devm_clk_get(dev, "hsio"); |
| if (IS_ERR(dwc3_imx->hsio_clk)) { |
| err = PTR_ERR(dwc3_imx->hsio_clk); |
| dev_err(dev, "Failed to get hsio clk, err=%d\n", err); |
| return err; |
| } |
| |
| err = clk_prepare_enable(dwc3_imx->hsio_clk); |
| if (err) { |
| dev_err(dev, "Failed to enable hsio clk, err=%d\n", err); |
| return err; |
| } |
| |
| dwc3_imx->suspend_clk = devm_clk_get(dev, "suspend"); |
| if (IS_ERR(dwc3_imx->suspend_clk)) { |
| err = PTR_ERR(dwc3_imx->suspend_clk); |
| dev_err(dev, "Failed to get suspend clk, err=%d\n", err); |
| goto disable_hsio_clk; |
| } |
| |
| err = clk_prepare_enable(dwc3_imx->suspend_clk); |
| if (err) { |
| dev_err(dev, "Failed to enable suspend clk, err=%d\n", err); |
| goto disable_hsio_clk; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| err = irq; |
| goto disable_clks; |
| } |
| dwc3_imx->irq = irq; |
| |
| imx8mp_configure_glue(dwc3_imx); |
| |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| err = pm_runtime_get_sync(dev); |
| if (err < 0) |
| goto disable_rpm; |
| |
| dwc3_np = of_get_compatible_child(node, "snps,dwc3"); |
| if (!dwc3_np) { |
| err = -ENODEV; |
| dev_err(dev, "failed to find dwc3 core child\n"); |
| goto disable_rpm; |
| } |
| |
| err = of_platform_populate(node, NULL, NULL, dev); |
| if (err) { |
| dev_err(&pdev->dev, "failed to create dwc3 core\n"); |
| goto err_node_put; |
| } |
| |
| dwc3_imx->dwc3 = of_find_device_by_node(dwc3_np); |
| if (!dwc3_imx->dwc3) { |
| dev_err(dev, "failed to get dwc3 platform device\n"); |
| err = -ENODEV; |
| goto depopulate; |
| } |
| of_node_put(dwc3_np); |
| |
| err = devm_request_threaded_irq(dev, irq, NULL, dwc3_imx8mp_interrupt, |
| IRQF_ONESHOT, dev_name(dev), dwc3_imx); |
| if (err) { |
| dev_err(dev, "failed to request IRQ #%d --> %d\n", irq, err); |
| goto depopulate; |
| } |
| |
| device_set_wakeup_capable(dev, true); |
| pm_runtime_put(dev); |
| |
| return 0; |
| |
| depopulate: |
| of_platform_depopulate(dev); |
| err_node_put: |
| of_node_put(dwc3_np); |
| disable_rpm: |
| pm_runtime_disable(dev); |
| pm_runtime_put_noidle(dev); |
| disable_clks: |
| clk_disable_unprepare(dwc3_imx->suspend_clk); |
| disable_hsio_clk: |
| clk_disable_unprepare(dwc3_imx->hsio_clk); |
| |
| return err; |
| } |
| |
| static int dwc3_imx8mp_remove(struct platform_device *pdev) |
| { |
| struct dwc3_imx8mp *dwc3_imx = platform_get_drvdata(pdev); |
| struct device *dev = &pdev->dev; |
| |
| pm_runtime_get_sync(dev); |
| of_platform_depopulate(dev); |
| |
| clk_disable_unprepare(dwc3_imx->suspend_clk); |
| clk_disable_unprepare(dwc3_imx->hsio_clk); |
| |
| pm_runtime_disable(dev); |
| pm_runtime_put_noidle(dev); |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused dwc3_imx8mp_suspend(struct dwc3_imx8mp *dwc3_imx, |
| pm_message_t msg) |
| { |
| if (dwc3_imx->pm_suspended) |
| return 0; |
| |
| /* Wakeup enable */ |
| if (PMSG_IS_AUTO(msg) || device_may_wakeup(dwc3_imx->dev)) |
| dwc3_imx8mp_wakeup_enable(dwc3_imx); |
| |
| dwc3_imx->pm_suspended = true; |
| |
| return 0; |
| } |
| |
| static int __maybe_unused dwc3_imx8mp_resume(struct dwc3_imx8mp *dwc3_imx, |
| pm_message_t msg) |
| { |
| struct dwc3 *dwc = platform_get_drvdata(dwc3_imx->dwc3); |
| int ret = 0; |
| |
| if (!dwc3_imx->pm_suspended) |
| return 0; |
| |
| /* Wakeup disable */ |
| dwc3_imx8mp_wakeup_disable(dwc3_imx); |
| dwc3_imx->pm_suspended = false; |
| |
| /* Upon power loss any previous configuration is lost, restore it */ |
| imx8mp_configure_glue(dwc3_imx); |
| |
| if (dwc3_imx->wakeup_pending) { |
| dwc3_imx->wakeup_pending = false; |
| if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE) { |
| pm_runtime_mark_last_busy(dwc->dev); |
| pm_runtime_put_autosuspend(dwc->dev); |
| } else { |
| /* |
| * Add wait for xhci switch from suspend |
| * clock to normal clock to detect connection. |
| */ |
| usleep_range(9000, 10000); |
| } |
| enable_irq(dwc3_imx->irq); |
| } |
| |
| return ret; |
| } |
| |
| static int __maybe_unused dwc3_imx8mp_pm_suspend(struct device *dev) |
| { |
| struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = dwc3_imx8mp_suspend(dwc3_imx, PMSG_SUSPEND); |
| |
| if (device_may_wakeup(dwc3_imx->dev)) |
| enable_irq_wake(dwc3_imx->irq); |
| else |
| clk_disable_unprepare(dwc3_imx->suspend_clk); |
| |
| clk_disable_unprepare(dwc3_imx->hsio_clk); |
| dev_dbg(dev, "dwc3 imx8mp pm suspend.\n"); |
| |
| return ret; |
| } |
| |
| static int __maybe_unused dwc3_imx8mp_pm_resume(struct device *dev) |
| { |
| struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev); |
| int ret; |
| |
| if (device_may_wakeup(dwc3_imx->dev)) { |
| disable_irq_wake(dwc3_imx->irq); |
| } else { |
| ret = clk_prepare_enable(dwc3_imx->suspend_clk); |
| if (ret) |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(dwc3_imx->hsio_clk); |
| if (ret) |
| return ret; |
| |
| ret = dwc3_imx8mp_resume(dwc3_imx, PMSG_RESUME); |
| |
| pm_runtime_disable(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| |
| dev_dbg(dev, "dwc3 imx8mp pm resume.\n"); |
| |
| return ret; |
| } |
| |
| static int __maybe_unused dwc3_imx8mp_runtime_suspend(struct device *dev) |
| { |
| struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev); |
| |
| dev_dbg(dev, "dwc3 imx8mp runtime suspend.\n"); |
| |
| return dwc3_imx8mp_suspend(dwc3_imx, PMSG_AUTO_SUSPEND); |
| } |
| |
| static int __maybe_unused dwc3_imx8mp_runtime_resume(struct device *dev) |
| { |
| struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev); |
| |
| dev_dbg(dev, "dwc3 imx8mp runtime resume.\n"); |
| |
| return dwc3_imx8mp_resume(dwc3_imx, PMSG_AUTO_RESUME); |
| } |
| |
| static const struct dev_pm_ops dwc3_imx8mp_dev_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(dwc3_imx8mp_pm_suspend, dwc3_imx8mp_pm_resume) |
| SET_RUNTIME_PM_OPS(dwc3_imx8mp_runtime_suspend, |
| dwc3_imx8mp_runtime_resume, NULL) |
| }; |
| |
| static const struct of_device_id dwc3_imx8mp_of_match[] = { |
| { .compatible = "fsl,imx8mp-dwc3", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, dwc3_imx8mp_of_match); |
| |
| static struct platform_driver dwc3_imx8mp_driver = { |
| .probe = dwc3_imx8mp_probe, |
| .remove = dwc3_imx8mp_remove, |
| .driver = { |
| .name = "imx8mp-dwc3", |
| .pm = &dwc3_imx8mp_dev_pm_ops, |
| .of_match_table = dwc3_imx8mp_of_match, |
| }, |
| }; |
| |
| module_platform_driver(dwc3_imx8mp_driver); |
| |
| MODULE_ALIAS("platform:imx8mp-dwc3"); |
| MODULE_AUTHOR("jun.li@nxp.com"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("DesignWare USB3 imx8mp Glue Layer"); |