| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Maxtor Shared Storage II Board Setup |
| * |
| * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/pci.h> |
| #include <linux/irq.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/pci.h> |
| #include "orion5x.h" |
| #include "bridge-regs.h" |
| #include "common.h" |
| |
| /***************************************************************************** |
| * Maxtor Shared Storage II Info |
| ****************************************************************************/ |
| |
| /**************************************************************************** |
| * PCI setup |
| ****************************************************************************/ |
| static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| int irq; |
| |
| /* |
| * Check for devices with hard-wired IRQs. |
| */ |
| irq = orion5x_pci_map_irq(dev, slot, pin); |
| if (irq != -1) |
| return irq; |
| |
| return -1; |
| } |
| |
| static struct hw_pci mss2_pci __initdata = { |
| .nr_controllers = 2, |
| .setup = orion5x_pci_sys_setup, |
| .scan = orion5x_pci_sys_scan_bus, |
| .map_irq = mss2_pci_map_irq, |
| }; |
| |
| static int __init mss2_pci_init(void) |
| { |
| if (machine_is_mss2()) |
| pci_common_init(&mss2_pci); |
| |
| return 0; |
| } |
| subsys_initcall(mss2_pci_init); |
| |
| /***************************************************************************** |
| * MSS2 power off method |
| ****************************************************************************/ |
| /* |
| * On the Maxtor Shared Storage II, the shutdown process is the following : |
| * - Userland modifies U-boot env to tell U-boot to go idle at next boot |
| * - The board reboots |
| * - U-boot starts and go into an idle mode until the user press "power" |
| */ |
| static void mss2_power_off(void) |
| { |
| u32 reg; |
| |
| /* |
| * Enable and issue soft reset |
| */ |
| reg = readl(RSTOUTn_MASK); |
| reg |= 1 << 2; |
| writel(reg, RSTOUTn_MASK); |
| |
| reg = readl(CPU_SOFT_RESET); |
| reg |= 1; |
| writel(reg, CPU_SOFT_RESET); |
| } |
| |
| void __init mss2_init(void) |
| { |
| /* register mss2 specific power-off method */ |
| register_platform_power_off(mss2_power_off); |
| } |