| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // Copyright (c) 2010-2014 Samsung Electronics Co., Ltd. |
| // http://www.samsung.com |
| // |
| // S5PV210 - Power Management support |
| // |
| // Based on arch/arm/mach-s3c2410/pm.c |
| // Copyright (c) 2006 Simtec Electronics |
| // Ben Dooks <ben@simtec.co.uk> |
| |
| #include <linux/init.h> |
| #include <linux/suspend.h> |
| #include <linux/syscore_ops.h> |
| #include <linux/io.h> |
| #include <linux/soc/samsung/s3c-pm.h> |
| |
| #include <asm/cacheflush.h> |
| #include <asm/suspend.h> |
| |
| #include "common.h" |
| #include "regs-clock.h" |
| |
| /* helper functions to save and restore register state */ |
| struct sleep_save { |
| void __iomem *reg; |
| unsigned long val; |
| }; |
| |
| #define SAVE_ITEM(x) \ |
| { .reg = (x) } |
| |
| /** |
| * s3c_pm_do_save() - save a set of registers for restoration on resume. |
| * @ptr: Pointer to an array of registers. |
| * @count: Size of the ptr array. |
| * |
| * Run through the list of registers given, saving their contents in the |
| * array for later restoration when we wakeup. |
| */ |
| static void s3c_pm_do_save(struct sleep_save *ptr, int count) |
| { |
| for (; count > 0; count--, ptr++) { |
| ptr->val = readl_relaxed(ptr->reg); |
| S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val); |
| } |
| } |
| |
| /** |
| * s3c_pm_do_restore_core() - restore register values from the save list. |
| * @ptr: Pointer to an array of registers. |
| * @count: Size of the ptr array. |
| * |
| * Restore the register values saved from s3c_pm_do_save(). |
| * |
| * WARNING: Do not put any debug in here that may effect memory or use |
| * peripherals, as things may be changing! |
| */ |
| |
| static void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count) |
| { |
| for (; count > 0; count--, ptr++) |
| writel_relaxed(ptr->val, ptr->reg); |
| } |
| |
| static struct sleep_save s5pv210_core_save[] = { |
| /* Clock ETC */ |
| SAVE_ITEM(S5P_MDNIE_SEL), |
| }; |
| |
| /* |
| * VIC wake-up support (TODO) |
| */ |
| static u32 s5pv210_irqwake_intmask = 0xffffffff; |
| |
| static u32 s5pv210_read_eint_wakeup_mask(void) |
| { |
| return __raw_readl(S5P_EINT_WAKEUP_MASK); |
| } |
| |
| /* |
| * Suspend helpers. |
| */ |
| static int s5pv210_cpu_suspend(unsigned long arg) |
| { |
| unsigned long tmp; |
| |
| /* issue the standby signal into the pm unit. Note, we |
| * issue a write-buffer drain just in case */ |
| |
| tmp = 0; |
| |
| asm("b 1f\n\t" |
| ".align 5\n\t" |
| "1:\n\t" |
| "mcr p15, 0, %0, c7, c10, 5\n\t" |
| "mcr p15, 0, %0, c7, c10, 4\n\t" |
| "wfi" : : "r" (tmp)); |
| |
| pr_info("Failed to suspend the system\n"); |
| return 1; /* Aborting suspend */ |
| } |
| |
| static void s5pv210_pm_prepare(void) |
| { |
| unsigned int tmp; |
| |
| /* |
| * Set wake-up mask registers |
| * S5P_EINT_WAKEUP_MASK is set by pinctrl driver in late suspend. |
| */ |
| __raw_writel(s5pv210_irqwake_intmask, S5P_WAKEUP_MASK); |
| |
| /* ensure at least INFORM0 has the resume address */ |
| __raw_writel(__pa_symbol(s5pv210_cpu_resume), S5P_INFORM0); |
| |
| tmp = __raw_readl(S5P_SLEEP_CFG); |
| tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN); |
| __raw_writel(tmp, S5P_SLEEP_CFG); |
| |
| /* WFI for SLEEP mode configuration by SYSCON */ |
| tmp = __raw_readl(S5P_PWR_CFG); |
| tmp &= S5P_CFG_WFI_CLEAN; |
| tmp |= S5P_CFG_WFI_SLEEP; |
| __raw_writel(tmp, S5P_PWR_CFG); |
| |
| /* SYSCON interrupt handling disable */ |
| tmp = __raw_readl(S5P_OTHERS); |
| tmp |= S5P_OTHER_SYSC_INTOFF; |
| __raw_writel(tmp, S5P_OTHERS); |
| |
| s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); |
| } |
| |
| /* |
| * Suspend operations. |
| */ |
| static int s5pv210_suspend_enter(suspend_state_t state) |
| { |
| u32 eint_wakeup_mask = s5pv210_read_eint_wakeup_mask(); |
| int ret; |
| |
| S3C_PMDBG("%s: suspending the system...\n", __func__); |
| |
| S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__, |
| s5pv210_irqwake_intmask, eint_wakeup_mask); |
| |
| if (s5pv210_irqwake_intmask == -1U |
| && eint_wakeup_mask == -1U) { |
| pr_err("%s: No wake-up sources!\n", __func__); |
| pr_err("%s: Aborting sleep\n", __func__); |
| return -EINVAL; |
| } |
| |
| s3c_pm_save_uarts(false); |
| s5pv210_pm_prepare(); |
| flush_cache_all(); |
| s3c_pm_check_store(); |
| |
| ret = cpu_suspend(0, s5pv210_cpu_suspend); |
| if (ret) |
| return ret; |
| |
| s3c_pm_restore_uarts(false); |
| |
| S3C_PMDBG("%s: wakeup stat: %08x\n", __func__, |
| __raw_readl(S5P_WAKEUP_STAT)); |
| |
| s3c_pm_check_restore(); |
| |
| S3C_PMDBG("%s: resuming the system...\n", __func__); |
| |
| return 0; |
| } |
| |
| static int s5pv210_suspend_prepare(void) |
| { |
| s3c_pm_check_prepare(); |
| |
| return 0; |
| } |
| |
| static void s5pv210_suspend_finish(void) |
| { |
| s3c_pm_check_cleanup(); |
| } |
| |
| static const struct platform_suspend_ops s5pv210_suspend_ops = { |
| .enter = s5pv210_suspend_enter, |
| .prepare = s5pv210_suspend_prepare, |
| .finish = s5pv210_suspend_finish, |
| .valid = suspend_valid_only_mem, |
| }; |
| |
| /* |
| * Syscore operations used to delay restore of certain registers. |
| */ |
| static void s5pv210_pm_resume(void) |
| { |
| s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); |
| } |
| |
| static struct syscore_ops s5pv210_pm_syscore_ops = { |
| .resume = s5pv210_pm_resume, |
| }; |
| |
| /* |
| * Initialization entry point. |
| */ |
| void __init s5pv210_pm_init(void) |
| { |
| register_syscore_ops(&s5pv210_pm_syscore_ops); |
| suspend_set_ops(&s5pv210_suspend_ops); |
| } |