| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Processor capabilities determination functions. |
| * |
| * Copyright (C) xxxx the Anonymous |
| * Copyright (C) 1994 - 2006 Ralf Baechle |
| * Copyright (C) 2003, 2004 Maciej W. Rozycki |
| * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. |
| */ |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/ptrace.h> |
| #include <linux/smp.h> |
| #include <linux/stddef.h> |
| #include <linux/export.h> |
| |
| #include <asm/bugs.h> |
| #include <asm/cpu.h> |
| #include <asm/cpu-features.h> |
| #include <asm/cpu-type.h> |
| #include <asm/fpu.h> |
| #include <asm/mipsregs.h> |
| #include <asm/mipsmtregs.h> |
| #include <asm/msa.h> |
| #include <asm/watch.h> |
| #include <asm/elf.h> |
| #include <asm/pgtable-bits.h> |
| #include <asm/spram.h> |
| #include <asm/traps.h> |
| #include <linux/uaccess.h> |
| |
| #include "fpu-probe.h" |
| |
| #include <asm/mach-loongson64/cpucfg-emul.h> |
| |
| /* Hardware capabilities */ |
| unsigned int elf_hwcap __read_mostly; |
| EXPORT_SYMBOL_GPL(elf_hwcap); |
| |
| static inline unsigned long cpu_get_msa_id(void) |
| { |
| unsigned long status, msa_id; |
| |
| status = read_c0_status(); |
| __enable_fpu(FPU_64BIT); |
| enable_msa(); |
| msa_id = read_msa_ir(); |
| disable_msa(); |
| write_c0_status(status); |
| return msa_id; |
| } |
| |
| static int mips_dsp_disabled; |
| |
| static int __init dsp_disable(char *s) |
| { |
| cpu_data[0].ases &= ~(MIPS_ASE_DSP | MIPS_ASE_DSP2P); |
| mips_dsp_disabled = 1; |
| |
| return 1; |
| } |
| |
| __setup("nodsp", dsp_disable); |
| |
| static int mips_htw_disabled; |
| |
| static int __init htw_disable(char *s) |
| { |
| mips_htw_disabled = 1; |
| cpu_data[0].options &= ~MIPS_CPU_HTW; |
| write_c0_pwctl(read_c0_pwctl() & |
| ~(1 << MIPS_PWCTL_PWEN_SHIFT)); |
| |
| return 1; |
| } |
| |
| __setup("nohtw", htw_disable); |
| |
| static int mips_ftlb_disabled; |
| static int mips_has_ftlb_configured; |
| |
| enum ftlb_flags { |
| FTLB_EN = 1 << 0, |
| FTLB_SET_PROB = 1 << 1, |
| }; |
| |
| static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags); |
| |
| static int __init ftlb_disable(char *s) |
| { |
| unsigned int config4, mmuextdef; |
| |
| /* |
| * If the core hasn't done any FTLB configuration, there is nothing |
| * for us to do here. |
| */ |
| if (!mips_has_ftlb_configured) |
| return 1; |
| |
| /* Disable it in the boot cpu */ |
| if (set_ftlb_enable(&cpu_data[0], 0)) { |
| pr_warn("Can't turn FTLB off\n"); |
| return 1; |
| } |
| |
| config4 = read_c0_config4(); |
| |
| /* Check that FTLB has been disabled */ |
| mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF; |
| /* MMUSIZEEXT == VTLB ON, FTLB OFF */ |
| if (mmuextdef == MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT) { |
| /* This should never happen */ |
| pr_warn("FTLB could not be disabled!\n"); |
| return 1; |
| } |
| |
| mips_ftlb_disabled = 1; |
| mips_has_ftlb_configured = 0; |
| |
| /* |
| * noftlb is mainly used for debug purposes so print |
| * an informative message instead of using pr_debug() |
| */ |
| pr_info("FTLB has been disabled\n"); |
| |
| /* |
| * Some of these bits are duplicated in the decode_config4. |
| * MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT is the only possible case |
| * once FTLB has been disabled so undo what decode_config4 did. |
| */ |
| cpu_data[0].tlbsize -= cpu_data[0].tlbsizeftlbways * |
| cpu_data[0].tlbsizeftlbsets; |
| cpu_data[0].tlbsizeftlbsets = 0; |
| cpu_data[0].tlbsizeftlbways = 0; |
| |
| return 1; |
| } |
| |
| __setup("noftlb", ftlb_disable); |
| |
| /* |
| * Check if the CPU has per tc perf counters |
| */ |
| static inline void cpu_set_mt_per_tc_perf(struct cpuinfo_mips *c) |
| { |
| if (read_c0_config7() & MTI_CONF7_PTC) |
| c->options |= MIPS_CPU_MT_PER_TC_PERF_COUNTERS; |
| } |
| |
| static inline void check_errata(void) |
| { |
| struct cpuinfo_mips *c = ¤t_cpu_data; |
| |
| switch (current_cpu_type()) { |
| case CPU_34K: |
| /* |
| * Erratum "RPS May Cause Incorrect Instruction Execution" |
| * This code only handles VPE0, any SMP/RTOS code |
| * making use of VPE1 will be responsible for that VPE. |
| */ |
| if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2) |
| write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void __init check_bugs32(void) |
| { |
| check_errata(); |
| } |
| |
| /* |
| * Probe whether cpu has config register by trying to play with |
| * alternate cache bit and see whether it matters. |
| * It's used by cpu_probe to distinguish between R3000A and R3081. |
| */ |
| static inline int cpu_has_confreg(void) |
| { |
| #ifdef CONFIG_CPU_R3000 |
| unsigned long size1, size2; |
| unsigned long cfg = read_c0_conf(); |
| |
| size1 = r3k_cache_size(ST0_ISC); |
| write_c0_conf(cfg ^ R30XX_CONF_AC); |
| size2 = r3k_cache_size(ST0_ISC); |
| write_c0_conf(cfg); |
| return size1 != size2; |
| #else |
| return 0; |
| #endif |
| } |
| |
| static inline void set_elf_platform(int cpu, const char *plat) |
| { |
| if (cpu == 0) |
| __elf_platform = plat; |
| } |
| |
| static inline void set_elf_base_platform(const char *plat) |
| { |
| if (__elf_base_platform == NULL) { |
| __elf_base_platform = plat; |
| } |
| } |
| |
| static inline void cpu_probe_vmbits(struct cpuinfo_mips *c) |
| { |
| #ifdef __NEED_VMBITS_PROBE |
| write_c0_entryhi(0x3fffffffffffe000ULL); |
| back_to_back_c0_hazard(); |
| c->vmbits = fls64(read_c0_entryhi() & 0x3fffffffffffe000ULL); |
| #endif |
| } |
| |
| static void set_isa(struct cpuinfo_mips *c, unsigned int isa) |
| { |
| switch (isa) { |
| case MIPS_CPU_ISA_M64R5: |
| c->isa_level |= MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5; |
| set_elf_base_platform("mips64r5"); |
| fallthrough; |
| case MIPS_CPU_ISA_M64R2: |
| c->isa_level |= MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2; |
| set_elf_base_platform("mips64r2"); |
| fallthrough; |
| case MIPS_CPU_ISA_M64R1: |
| c->isa_level |= MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1; |
| set_elf_base_platform("mips64"); |
| fallthrough; |
| case MIPS_CPU_ISA_V: |
| c->isa_level |= MIPS_CPU_ISA_V; |
| set_elf_base_platform("mips5"); |
| fallthrough; |
| case MIPS_CPU_ISA_IV: |
| c->isa_level |= MIPS_CPU_ISA_IV; |
| set_elf_base_platform("mips4"); |
| fallthrough; |
| case MIPS_CPU_ISA_III: |
| c->isa_level |= MIPS_CPU_ISA_II | MIPS_CPU_ISA_III; |
| set_elf_base_platform("mips3"); |
| break; |
| |
| /* R6 incompatible with everything else */ |
| case MIPS_CPU_ISA_M64R6: |
| c->isa_level |= MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6; |
| set_elf_base_platform("mips64r6"); |
| fallthrough; |
| case MIPS_CPU_ISA_M32R6: |
| c->isa_level |= MIPS_CPU_ISA_M32R6; |
| set_elf_base_platform("mips32r6"); |
| /* Break here so we don't add incompatible ISAs */ |
| break; |
| case MIPS_CPU_ISA_M32R5: |
| c->isa_level |= MIPS_CPU_ISA_M32R5; |
| set_elf_base_platform("mips32r5"); |
| fallthrough; |
| case MIPS_CPU_ISA_M32R2: |
| c->isa_level |= MIPS_CPU_ISA_M32R2; |
| set_elf_base_platform("mips32r2"); |
| fallthrough; |
| case MIPS_CPU_ISA_M32R1: |
| c->isa_level |= MIPS_CPU_ISA_M32R1; |
| set_elf_base_platform("mips32"); |
| fallthrough; |
| case MIPS_CPU_ISA_II: |
| c->isa_level |= MIPS_CPU_ISA_II; |
| set_elf_base_platform("mips2"); |
| break; |
| } |
| } |
| |
| static char unknown_isa[] = KERN_ERR \ |
| "Unsupported ISA type, c0.config0: %d."; |
| |
| static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c) |
| { |
| |
| unsigned int probability = c->tlbsize / c->tlbsizevtlb; |
| |
| /* |
| * 0 = All TLBWR instructions go to FTLB |
| * 1 = 15:1: For every 16 TBLWR instructions, 15 go to the |
| * FTLB and 1 goes to the VTLB. |
| * 2 = 7:1: As above with 7:1 ratio. |
| * 3 = 3:1: As above with 3:1 ratio. |
| * |
| * Use the linear midpoint as the probability threshold. |
| */ |
| if (probability >= 12) |
| return 1; |
| else if (probability >= 6) |
| return 2; |
| else |
| /* |
| * So FTLB is less than 4 times bigger than VTLB. |
| * A 3:1 ratio can still be useful though. |
| */ |
| return 3; |
| } |
| |
| static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags) |
| { |
| unsigned int config; |
| |
| /* It's implementation dependent how the FTLB can be enabled */ |
| switch (c->cputype) { |
| case CPU_PROAPTIV: |
| case CPU_P5600: |
| case CPU_P6600: |
| /* proAptiv & related cores use Config6 to enable the FTLB */ |
| config = read_c0_config6(); |
| |
| if (flags & FTLB_EN) |
| config |= MTI_CONF6_FTLBEN; |
| else |
| config &= ~MTI_CONF6_FTLBEN; |
| |
| if (flags & FTLB_SET_PROB) { |
| config &= ~(3 << MTI_CONF6_FTLBP_SHIFT); |
| config |= calculate_ftlb_probability(c) |
| << MTI_CONF6_FTLBP_SHIFT; |
| } |
| |
| write_c0_config6(config); |
| back_to_back_c0_hazard(); |
| break; |
| case CPU_I6400: |
| case CPU_I6500: |
| /* There's no way to disable the FTLB */ |
| if (!(flags & FTLB_EN)) |
| return 1; |
| return 0; |
| case CPU_LOONGSON64: |
| /* Flush ITLB, DTLB, VTLB and FTLB */ |
| write_c0_diag(LOONGSON_DIAG_ITLB | LOONGSON_DIAG_DTLB | |
| LOONGSON_DIAG_VTLB | LOONGSON_DIAG_FTLB); |
| /* Loongson-3 cores use Config6 to enable the FTLB */ |
| config = read_c0_config6(); |
| if (flags & FTLB_EN) |
| /* Enable FTLB */ |
| write_c0_config6(config & ~LOONGSON_CONF6_FTLBDIS); |
| else |
| /* Disable FTLB */ |
| write_c0_config6(config | LOONGSON_CONF6_FTLBDIS); |
| break; |
| default: |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int mm_config(struct cpuinfo_mips *c) |
| { |
| unsigned int config0, update, mm; |
| |
| config0 = read_c0_config(); |
| mm = config0 & MIPS_CONF_MM; |
| |
| /* |
| * It's implementation dependent what type of write-merge is supported |
| * and whether it can be enabled/disabled. If it is settable lets make |
| * the merging allowed by default. Some platforms might have |
| * write-through caching unsupported. In this case just ignore the |
| * CP0.Config.MM bit field value. |
| */ |
| switch (c->cputype) { |
| case CPU_24K: |
| case CPU_34K: |
| case CPU_74K: |
| case CPU_P5600: |
| case CPU_P6600: |
| c->options |= MIPS_CPU_MM_FULL; |
| update = MIPS_CONF_MM_FULL; |
| break; |
| case CPU_1004K: |
| case CPU_1074K: |
| case CPU_INTERAPTIV: |
| case CPU_PROAPTIV: |
| mm = 0; |
| fallthrough; |
| default: |
| update = 0; |
| break; |
| } |
| |
| if (update) { |
| config0 = (config0 & ~MIPS_CONF_MM) | update; |
| write_c0_config(config0); |
| } else if (mm == MIPS_CONF_MM_SYSAD) { |
| c->options |= MIPS_CPU_MM_SYSAD; |
| } else if (mm == MIPS_CONF_MM_FULL) { |
| c->options |= MIPS_CPU_MM_FULL; |
| } |
| |
| return 0; |
| } |
| |
| static inline unsigned int decode_config0(struct cpuinfo_mips *c) |
| { |
| unsigned int config0; |
| int isa, mt; |
| |
| config0 = read_c0_config(); |
| |
| /* |
| * Look for Standard TLB or Dual VTLB and FTLB |
| */ |
| mt = config0 & MIPS_CONF_MT; |
| if (mt == MIPS_CONF_MT_TLB) |
| c->options |= MIPS_CPU_TLB; |
| else if (mt == MIPS_CONF_MT_FTLB) |
| c->options |= MIPS_CPU_TLB | MIPS_CPU_FTLB; |
| |
| isa = (config0 & MIPS_CONF_AT) >> 13; |
| switch (isa) { |
| case 0: |
| switch ((config0 & MIPS_CONF_AR) >> 10) { |
| case 0: |
| set_isa(c, MIPS_CPU_ISA_M32R1); |
| break; |
| case 1: |
| set_isa(c, MIPS_CPU_ISA_M32R2); |
| break; |
| case 2: |
| set_isa(c, MIPS_CPU_ISA_M32R6); |
| break; |
| default: |
| goto unknown; |
| } |
| break; |
| case 2: |
| switch ((config0 & MIPS_CONF_AR) >> 10) { |
| case 0: |
| set_isa(c, MIPS_CPU_ISA_M64R1); |
| break; |
| case 1: |
| set_isa(c, MIPS_CPU_ISA_M64R2); |
| break; |
| case 2: |
| set_isa(c, MIPS_CPU_ISA_M64R6); |
| break; |
| default: |
| goto unknown; |
| } |
| break; |
| default: |
| goto unknown; |
| } |
| |
| return config0 & MIPS_CONF_M; |
| |
| unknown: |
| panic(unknown_isa, config0); |
| } |
| |
| static inline unsigned int decode_config1(struct cpuinfo_mips *c) |
| { |
| unsigned int config1; |
| |
| config1 = read_c0_config1(); |
| |
| if (config1 & MIPS_CONF1_MD) |
| c->ases |= MIPS_ASE_MDMX; |
| if (config1 & MIPS_CONF1_PC) |
| c->options |= MIPS_CPU_PERF; |
| if (config1 & MIPS_CONF1_WR) |
| c->options |= MIPS_CPU_WATCH; |
| if (config1 & MIPS_CONF1_CA) |
| c->ases |= MIPS_ASE_MIPS16; |
| if (config1 & MIPS_CONF1_EP) |
| c->options |= MIPS_CPU_EJTAG; |
| if (config1 & MIPS_CONF1_FP) { |
| c->options |= MIPS_CPU_FPU; |
| c->options |= MIPS_CPU_32FPR; |
| } |
| if (cpu_has_tlb) { |
| c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1; |
| c->tlbsizevtlb = c->tlbsize; |
| c->tlbsizeftlbsets = 0; |
| } |
| |
| return config1 & MIPS_CONF_M; |
| } |
| |
| static inline unsigned int decode_config2(struct cpuinfo_mips *c) |
| { |
| unsigned int config2; |
| |
| config2 = read_c0_config2(); |
| |
| if (config2 & MIPS_CONF2_SL) |
| c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT; |
| |
| return config2 & MIPS_CONF_M; |
| } |
| |
| static inline unsigned int decode_config3(struct cpuinfo_mips *c) |
| { |
| unsigned int config3; |
| |
| config3 = read_c0_config3(); |
| |
| if (config3 & MIPS_CONF3_SM) { |
| c->ases |= MIPS_ASE_SMARTMIPS; |
| c->options |= MIPS_CPU_RIXI | MIPS_CPU_CTXTC; |
| } |
| if (config3 & MIPS_CONF3_RXI) |
| c->options |= MIPS_CPU_RIXI; |
| if (config3 & MIPS_CONF3_CTXTC) |
| c->options |= MIPS_CPU_CTXTC; |
| if (config3 & MIPS_CONF3_DSP) |
| c->ases |= MIPS_ASE_DSP; |
| if (config3 & MIPS_CONF3_DSP2P) { |
| c->ases |= MIPS_ASE_DSP2P; |
| if (cpu_has_mips_r6) |
| c->ases |= MIPS_ASE_DSP3; |
| } |
| if (config3 & MIPS_CONF3_VINT) |
| c->options |= MIPS_CPU_VINT; |
| if (config3 & MIPS_CONF3_VEIC) |
| c->options |= MIPS_CPU_VEIC; |
| if (config3 & MIPS_CONF3_LPA) |
| c->options |= MIPS_CPU_LPA; |
| if (config3 & MIPS_CONF3_MT) |
| c->ases |= MIPS_ASE_MIPSMT; |
| if (config3 & MIPS_CONF3_ULRI) |
| c->options |= MIPS_CPU_ULRI; |
| if (config3 & MIPS_CONF3_ISA) |
| c->options |= MIPS_CPU_MICROMIPS; |
| if (config3 & MIPS_CONF3_VZ) |
| c->ases |= MIPS_ASE_VZ; |
| if (config3 & MIPS_CONF3_SC) |
| c->options |= MIPS_CPU_SEGMENTS; |
| if (config3 & MIPS_CONF3_BI) |
| c->options |= MIPS_CPU_BADINSTR; |
| if (config3 & MIPS_CONF3_BP) |
| c->options |= MIPS_CPU_BADINSTRP; |
| if (config3 & MIPS_CONF3_MSA) |
| c->ases |= MIPS_ASE_MSA; |
| if (config3 & MIPS_CONF3_PW) { |
| c->htw_seq = 0; |
| c->options |= MIPS_CPU_HTW; |
| } |
| if (config3 & MIPS_CONF3_CDMM) |
| c->options |= MIPS_CPU_CDMM; |
| if (config3 & MIPS_CONF3_SP) |
| c->options |= MIPS_CPU_SP; |
| |
| return config3 & MIPS_CONF_M; |
| } |
| |
| static inline unsigned int decode_config4(struct cpuinfo_mips *c) |
| { |
| unsigned int config4; |
| unsigned int newcf4; |
| unsigned int mmuextdef; |
| unsigned int ftlb_page = MIPS_CONF4_FTLBPAGESIZE; |
| unsigned long asid_mask; |
| |
| config4 = read_c0_config4(); |
| |
| if (cpu_has_tlb) { |
| if (((config4 & MIPS_CONF4_IE) >> 29) == 2) |
| c->options |= MIPS_CPU_TLBINV; |
| |
| /* |
| * R6 has dropped the MMUExtDef field from config4. |
| * On R6 the fields always describe the FTLB, and only if it is |
| * present according to Config.MT. |
| */ |
| if (!cpu_has_mips_r6) |
| mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF; |
| else if (cpu_has_ftlb) |
| mmuextdef = MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT; |
| else |
| mmuextdef = 0; |
| |
| switch (mmuextdef) { |
| case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT: |
| c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40; |
| c->tlbsizevtlb = c->tlbsize; |
| break; |
| case MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT: |
| c->tlbsizevtlb += |
| ((config4 & MIPS_CONF4_VTLBSIZEEXT) >> |
| MIPS_CONF4_VTLBSIZEEXT_SHIFT) * 0x40; |
| c->tlbsize = c->tlbsizevtlb; |
| ftlb_page = MIPS_CONF4_VFTLBPAGESIZE; |
| fallthrough; |
| case MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT: |
| if (mips_ftlb_disabled) |
| break; |
| newcf4 = (config4 & ~ftlb_page) | |
| (page_size_ftlb(mmuextdef) << |
| MIPS_CONF4_FTLBPAGESIZE_SHIFT); |
| write_c0_config4(newcf4); |
| back_to_back_c0_hazard(); |
| config4 = read_c0_config4(); |
| if (config4 != newcf4) { |
| pr_err("PAGE_SIZE 0x%lx is not supported by FTLB (config4=0x%x)\n", |
| PAGE_SIZE, config4); |
| /* Switch FTLB off */ |
| set_ftlb_enable(c, 0); |
| mips_ftlb_disabled = 1; |
| break; |
| } |
| c->tlbsizeftlbsets = 1 << |
| ((config4 & MIPS_CONF4_FTLBSETS) >> |
| MIPS_CONF4_FTLBSETS_SHIFT); |
| c->tlbsizeftlbways = ((config4 & MIPS_CONF4_FTLBWAYS) >> |
| MIPS_CONF4_FTLBWAYS_SHIFT) + 2; |
| c->tlbsize += c->tlbsizeftlbways * c->tlbsizeftlbsets; |
| mips_has_ftlb_configured = 1; |
| break; |
| } |
| } |
| |
| c->kscratch_mask = (config4 & MIPS_CONF4_KSCREXIST) |
| >> MIPS_CONF4_KSCREXIST_SHIFT; |
| |
| asid_mask = MIPS_ENTRYHI_ASID; |
| if (config4 & MIPS_CONF4_AE) |
| asid_mask |= MIPS_ENTRYHI_ASIDX; |
| set_cpu_asid_mask(c, asid_mask); |
| |
| /* |
| * Warn if the computed ASID mask doesn't match the mask the kernel |
| * is built for. This may indicate either a serious problem or an |
| * easy optimisation opportunity, but either way should be addressed. |
| */ |
| WARN_ON(asid_mask != cpu_asid_mask(c)); |
| |
| return config4 & MIPS_CONF_M; |
| } |
| |
| static inline unsigned int decode_config5(struct cpuinfo_mips *c) |
| { |
| unsigned int config5, max_mmid_width; |
| unsigned long asid_mask; |
| |
| config5 = read_c0_config5(); |
| config5 &= ~(MIPS_CONF5_UFR | MIPS_CONF5_UFE); |
| |
| if (cpu_has_mips_r6) { |
| if (!__builtin_constant_p(cpu_has_mmid) || cpu_has_mmid) |
| config5 |= MIPS_CONF5_MI; |
| else |
| config5 &= ~MIPS_CONF5_MI; |
| } |
| |
| write_c0_config5(config5); |
| |
| if (config5 & MIPS_CONF5_EVA) |
| c->options |= MIPS_CPU_EVA; |
| if (config5 & MIPS_CONF5_MRP) |
| c->options |= MIPS_CPU_MAAR; |
| if (config5 & MIPS_CONF5_LLB) |
| c->options |= MIPS_CPU_RW_LLB; |
| if (config5 & MIPS_CONF5_MVH) |
| c->options |= MIPS_CPU_MVH; |
| if (cpu_has_mips_r6 && (config5 & MIPS_CONF5_VP)) |
| c->options |= MIPS_CPU_VP; |
| if (config5 & MIPS_CONF5_CA2) |
| c->ases |= MIPS_ASE_MIPS16E2; |
| |
| if (config5 & MIPS_CONF5_CRCP) |
| elf_hwcap |= HWCAP_MIPS_CRC32; |
| |
| if (cpu_has_mips_r6) { |
| /* Ensure the write to config5 above takes effect */ |
| back_to_back_c0_hazard(); |
| |
| /* Check whether we successfully enabled MMID support */ |
| config5 = read_c0_config5(); |
| if (config5 & MIPS_CONF5_MI) |
| c->options |= MIPS_CPU_MMID; |
| |
| /* |
| * Warn if we've hardcoded cpu_has_mmid to a value unsuitable |
| * for the CPU we're running on, or if CPUs in an SMP system |
| * have inconsistent MMID support. |
| */ |
| WARN_ON(!!cpu_has_mmid != !!(config5 & MIPS_CONF5_MI)); |
| |
| if (cpu_has_mmid) { |
| write_c0_memorymapid(~0ul); |
| back_to_back_c0_hazard(); |
| asid_mask = read_c0_memorymapid(); |
| |
| /* |
| * We maintain a bitmap to track MMID allocation, and |
| * need a sensible upper bound on the size of that |
| * bitmap. The initial CPU with MMID support (I6500) |
| * supports 16 bit MMIDs, which gives us an 8KiB |
| * bitmap. The architecture recommends that hardware |
| * support 32 bit MMIDs, which would give us a 512MiB |
| * bitmap - that's too big in most cases. |
| * |
| * Cap MMID width at 16 bits for now & we can revisit |
| * this if & when hardware supports anything wider. |
| */ |
| max_mmid_width = 16; |
| if (asid_mask > GENMASK(max_mmid_width - 1, 0)) { |
| pr_info("Capping MMID width at %d bits", |
| max_mmid_width); |
| asid_mask = GENMASK(max_mmid_width - 1, 0); |
| } |
| |
| set_cpu_asid_mask(c, asid_mask); |
| } |
| } |
| |
| return config5 & MIPS_CONF_M; |
| } |
| |
| static void decode_configs(struct cpuinfo_mips *c) |
| { |
| int ok; |
| |
| /* MIPS32 or MIPS64 compliant CPU. */ |
| c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER | |
| MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK; |
| |
| c->scache.flags = MIPS_CACHE_NOT_PRESENT; |
| |
| /* Enable FTLB if present and not disabled */ |
| set_ftlb_enable(c, mips_ftlb_disabled ? 0 : FTLB_EN); |
| |
| ok = decode_config0(c); /* Read Config registers. */ |
| BUG_ON(!ok); /* Arch spec violation! */ |
| if (ok) |
| ok = decode_config1(c); |
| if (ok) |
| ok = decode_config2(c); |
| if (ok) |
| ok = decode_config3(c); |
| if (ok) |
| ok = decode_config4(c); |
| if (ok) |
| ok = decode_config5(c); |
| |
| /* Probe the EBase.WG bit */ |
| if (cpu_has_mips_r2_r6) { |
| u64 ebase; |
| unsigned int status; |
| |
| /* {read,write}_c0_ebase_64() may be UNDEFINED prior to r6 */ |
| ebase = cpu_has_mips64r6 ? read_c0_ebase_64() |
| : (s32)read_c0_ebase(); |
| if (ebase & MIPS_EBASE_WG) { |
| /* WG bit already set, we can avoid the clumsy probe */ |
| c->options |= MIPS_CPU_EBASE_WG; |
| } else { |
| /* Its UNDEFINED to change EBase while BEV=0 */ |
| status = read_c0_status(); |
| write_c0_status(status | ST0_BEV); |
| irq_enable_hazard(); |
| /* |
| * On pre-r6 cores, this may well clobber the upper bits |
| * of EBase. This is hard to avoid without potentially |
| * hitting UNDEFINED dm*c0 behaviour if EBase is 32-bit. |
| */ |
| if (cpu_has_mips64r6) |
| write_c0_ebase_64(ebase | MIPS_EBASE_WG); |
| else |
| write_c0_ebase(ebase | MIPS_EBASE_WG); |
| back_to_back_c0_hazard(); |
| /* Restore BEV */ |
| write_c0_status(status); |
| if (read_c0_ebase() & MIPS_EBASE_WG) { |
| c->options |= MIPS_CPU_EBASE_WG; |
| write_c0_ebase(ebase); |
| } |
| } |
| } |
| |
| /* configure the FTLB write probability */ |
| set_ftlb_enable(c, (mips_ftlb_disabled ? 0 : FTLB_EN) | FTLB_SET_PROB); |
| |
| mips_probe_watch_registers(c); |
| |
| #ifndef CONFIG_MIPS_CPS |
| if (cpu_has_mips_r2_r6) { |
| unsigned int core; |
| |
| core = get_ebase_cpunum(); |
| if (cpu_has_mipsmt) |
| core >>= fls(core_nvpes()) - 1; |
| cpu_set_core(c, core); |
| } |
| #endif |
| } |
| |
| /* |
| * Probe for certain guest capabilities by writing config bits and reading back. |
| * Finally write back the original value. |
| */ |
| #define probe_gc0_config(name, maxconf, bits) \ |
| do { \ |
| unsigned int tmp; \ |
| tmp = read_gc0_##name(); \ |
| write_gc0_##name(tmp | (bits)); \ |
| back_to_back_c0_hazard(); \ |
| maxconf = read_gc0_##name(); \ |
| write_gc0_##name(tmp); \ |
| } while (0) |
| |
| /* |
| * Probe for dynamic guest capabilities by changing certain config bits and |
| * reading back to see if they change. Finally write back the original value. |
| */ |
| #define probe_gc0_config_dyn(name, maxconf, dynconf, bits) \ |
| do { \ |
| maxconf = read_gc0_##name(); \ |
| write_gc0_##name(maxconf ^ (bits)); \ |
| back_to_back_c0_hazard(); \ |
| dynconf = maxconf ^ read_gc0_##name(); \ |
| write_gc0_##name(maxconf); \ |
| maxconf |= dynconf; \ |
| } while (0) |
| |
| static inline unsigned int decode_guest_config0(struct cpuinfo_mips *c) |
| { |
| unsigned int config0; |
| |
| probe_gc0_config(config, config0, MIPS_CONF_M); |
| |
| if (config0 & MIPS_CONF_M) |
| c->guest.conf |= BIT(1); |
| return config0 & MIPS_CONF_M; |
| } |
| |
| static inline unsigned int decode_guest_config1(struct cpuinfo_mips *c) |
| { |
| unsigned int config1, config1_dyn; |
| |
| probe_gc0_config_dyn(config1, config1, config1_dyn, |
| MIPS_CONF_M | MIPS_CONF1_PC | MIPS_CONF1_WR | |
| MIPS_CONF1_FP); |
| |
| if (config1 & MIPS_CONF1_FP) |
| c->guest.options |= MIPS_CPU_FPU; |
| if (config1_dyn & MIPS_CONF1_FP) |
| c->guest.options_dyn |= MIPS_CPU_FPU; |
| |
| if (config1 & MIPS_CONF1_WR) |
| c->guest.options |= MIPS_CPU_WATCH; |
| if (config1_dyn & MIPS_CONF1_WR) |
| c->guest.options_dyn |= MIPS_CPU_WATCH; |
| |
| if (config1 & MIPS_CONF1_PC) |
| c->guest.options |= MIPS_CPU_PERF; |
| if (config1_dyn & MIPS_CONF1_PC) |
| c->guest.options_dyn |= MIPS_CPU_PERF; |
| |
| if (config1 & MIPS_CONF_M) |
| c->guest.conf |= BIT(2); |
| return config1 & MIPS_CONF_M; |
| } |
| |
| static inline unsigned int decode_guest_config2(struct cpuinfo_mips *c) |
| { |
| unsigned int config2; |
| |
| probe_gc0_config(config2, config2, MIPS_CONF_M); |
| |
| if (config2 & MIPS_CONF_M) |
| c->guest.conf |= BIT(3); |
| return config2 & MIPS_CONF_M; |
| } |
| |
| static inline unsigned int decode_guest_config3(struct cpuinfo_mips *c) |
| { |
| unsigned int config3, config3_dyn; |
| |
| probe_gc0_config_dyn(config3, config3, config3_dyn, |
| MIPS_CONF_M | MIPS_CONF3_MSA | MIPS_CONF3_ULRI | |
| MIPS_CONF3_CTXTC); |
| |
| if (config3 & MIPS_CONF3_CTXTC) |
| c->guest.options |= MIPS_CPU_CTXTC; |
| if (config3_dyn & MIPS_CONF3_CTXTC) |
| c->guest.options_dyn |= MIPS_CPU_CTXTC; |
| |
| if (config3 & MIPS_CONF3_PW) |
| c->guest.options |= MIPS_CPU_HTW; |
| |
| if (config3 & MIPS_CONF3_ULRI) |
| c->guest.options |= MIPS_CPU_ULRI; |
| |
| if (config3 & MIPS_CONF3_SC) |
| c->guest.options |= MIPS_CPU_SEGMENTS; |
| |
| if (config3 & MIPS_CONF3_BI) |
| c->guest.options |= MIPS_CPU_BADINSTR; |
| if (config3 & MIPS_CONF3_BP) |
| c->guest.options |= MIPS_CPU_BADINSTRP; |
| |
| if (config3 & MIPS_CONF3_MSA) |
| c->guest.ases |= MIPS_ASE_MSA; |
| if (config3_dyn & MIPS_CONF3_MSA) |
| c->guest.ases_dyn |= MIPS_ASE_MSA; |
| |
| if (config3 & MIPS_CONF_M) |
| c->guest.conf |= BIT(4); |
| return config3 & MIPS_CONF_M; |
| } |
| |
| static inline unsigned int decode_guest_config4(struct cpuinfo_mips *c) |
| { |
| unsigned int config4; |
| |
| probe_gc0_config(config4, config4, |
| MIPS_CONF_M | MIPS_CONF4_KSCREXIST); |
| |
| c->guest.kscratch_mask = (config4 & MIPS_CONF4_KSCREXIST) |
| >> MIPS_CONF4_KSCREXIST_SHIFT; |
| |
| if (config4 & MIPS_CONF_M) |
| c->guest.conf |= BIT(5); |
| return config4 & MIPS_CONF_M; |
| } |
| |
| static inline unsigned int decode_guest_config5(struct cpuinfo_mips *c) |
| { |
| unsigned int config5, config5_dyn; |
| |
| probe_gc0_config_dyn(config5, config5, config5_dyn, |
| MIPS_CONF_M | MIPS_CONF5_MVH | MIPS_CONF5_MRP); |
| |
| if (config5 & MIPS_CONF5_MRP) |
| c->guest.options |= MIPS_CPU_MAAR; |
| if (config5_dyn & MIPS_CONF5_MRP) |
| c->guest.options_dyn |= MIPS_CPU_MAAR; |
| |
| if (config5 & MIPS_CONF5_LLB) |
| c->guest.options |= MIPS_CPU_RW_LLB; |
| |
| if (config5 & MIPS_CONF5_MVH) |
| c->guest.options |= MIPS_CPU_MVH; |
| |
| if (config5 & MIPS_CONF_M) |
| c->guest.conf |= BIT(6); |
| return config5 & MIPS_CONF_M; |
| } |
| |
| static inline void decode_guest_configs(struct cpuinfo_mips *c) |
| { |
| unsigned int ok; |
| |
| ok = decode_guest_config0(c); |
| if (ok) |
| ok = decode_guest_config1(c); |
| if (ok) |
| ok = decode_guest_config2(c); |
| if (ok) |
| ok = decode_guest_config3(c); |
| if (ok) |
| ok = decode_guest_config4(c); |
| if (ok) |
| decode_guest_config5(c); |
| } |
| |
| static inline void cpu_probe_guestctl0(struct cpuinfo_mips *c) |
| { |
| unsigned int guestctl0, temp; |
| |
| guestctl0 = read_c0_guestctl0(); |
| |
| if (guestctl0 & MIPS_GCTL0_G0E) |
| c->options |= MIPS_CPU_GUESTCTL0EXT; |
| if (guestctl0 & MIPS_GCTL0_G1) |
| c->options |= MIPS_CPU_GUESTCTL1; |
| if (guestctl0 & MIPS_GCTL0_G2) |
| c->options |= MIPS_CPU_GUESTCTL2; |
| if (!(guestctl0 & MIPS_GCTL0_RAD)) { |
| c->options |= MIPS_CPU_GUESTID; |
| |
| /* |
| * Probe for Direct Root to Guest (DRG). Set GuestCtl1.RID = 0 |
| * first, otherwise all data accesses will be fully virtualised |
| * as if they were performed by guest mode. |
| */ |
| write_c0_guestctl1(0); |
| tlbw_use_hazard(); |
| |
| write_c0_guestctl0(guestctl0 | MIPS_GCTL0_DRG); |
| back_to_back_c0_hazard(); |
| temp = read_c0_guestctl0(); |
| |
| if (temp & MIPS_GCTL0_DRG) { |
| write_c0_guestctl0(guestctl0); |
| c->options |= MIPS_CPU_DRG; |
| } |
| } |
| } |
| |
| static inline void cpu_probe_guestctl1(struct cpuinfo_mips *c) |
| { |
| if (cpu_has_guestid) { |
| /* determine the number of bits of GuestID available */ |
| write_c0_guestctl1(MIPS_GCTL1_ID); |
| back_to_back_c0_hazard(); |
| c->guestid_mask = (read_c0_guestctl1() & MIPS_GCTL1_ID) |
| >> MIPS_GCTL1_ID_SHIFT; |
| write_c0_guestctl1(0); |
| } |
| } |
| |
| static inline void cpu_probe_gtoffset(struct cpuinfo_mips *c) |
| { |
| /* determine the number of bits of GTOffset available */ |
| write_c0_gtoffset(0xffffffff); |
| back_to_back_c0_hazard(); |
| c->gtoffset_mask = read_c0_gtoffset(); |
| write_c0_gtoffset(0); |
| } |
| |
| static inline void cpu_probe_vz(struct cpuinfo_mips *c) |
| { |
| cpu_probe_guestctl0(c); |
| if (cpu_has_guestctl1) |
| cpu_probe_guestctl1(c); |
| |
| cpu_probe_gtoffset(c); |
| |
| decode_guest_configs(c); |
| } |
| |
| #define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \ |
| | MIPS_CPU_COUNTER) |
| |
| static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| switch (c->processor_id & PRID_IMP_MASK) { |
| case PRID_IMP_R2000: |
| c->cputype = CPU_R2000; |
| __cpu_name[cpu] = "R2000"; |
| c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS; |
| c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | |
| MIPS_CPU_NOFPUEX; |
| if (__cpu_has_fpu()) |
| c->options |= MIPS_CPU_FPU; |
| c->tlbsize = 64; |
| break; |
| case PRID_IMP_R3000: |
| if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) { |
| if (cpu_has_confreg()) { |
| c->cputype = CPU_R3081E; |
| __cpu_name[cpu] = "R3081"; |
| } else { |
| c->cputype = CPU_R3000A; |
| __cpu_name[cpu] = "R3000A"; |
| } |
| } else { |
| c->cputype = CPU_R3000; |
| __cpu_name[cpu] = "R3000"; |
| } |
| c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS; |
| c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | |
| MIPS_CPU_NOFPUEX; |
| if (__cpu_has_fpu()) |
| c->options |= MIPS_CPU_FPU; |
| c->tlbsize = 64; |
| break; |
| case PRID_IMP_R4000: |
| if (read_c0_config() & CONF_SC) { |
| if ((c->processor_id & PRID_REV_MASK) >= |
| PRID_REV_R4400) { |
| c->cputype = CPU_R4400PC; |
| __cpu_name[cpu] = "R4400PC"; |
| } else { |
| c->cputype = CPU_R4000PC; |
| __cpu_name[cpu] = "R4000PC"; |
| } |
| } else { |
| int cca = read_c0_config() & CONF_CM_CMASK; |
| int mc; |
| |
| /* |
| * SC and MC versions can't be reliably told apart, |
| * but only the latter support coherent caching |
| * modes so assume the firmware has set the KSEG0 |
| * coherency attribute reasonably (if uncached, we |
| * assume SC). |
| */ |
| switch (cca) { |
| case CONF_CM_CACHABLE_CE: |
| case CONF_CM_CACHABLE_COW: |
| case CONF_CM_CACHABLE_CUW: |
| mc = 1; |
| break; |
| default: |
| mc = 0; |
| break; |
| } |
| if ((c->processor_id & PRID_REV_MASK) >= |
| PRID_REV_R4400) { |
| c->cputype = mc ? CPU_R4400MC : CPU_R4400SC; |
| __cpu_name[cpu] = mc ? "R4400MC" : "R4400SC"; |
| } else { |
| c->cputype = mc ? CPU_R4000MC : CPU_R4000SC; |
| __cpu_name[cpu] = mc ? "R4000MC" : "R4000SC"; |
| } |
| } |
| |
| set_isa(c, MIPS_CPU_ISA_III); |
| c->fpu_msk31 |= FPU_CSR_CONDX; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_WATCH | MIPS_CPU_VCE | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| case PRID_IMP_R4300: |
| c->cputype = CPU_R4300; |
| __cpu_name[cpu] = "R4300"; |
| set_isa(c, MIPS_CPU_ISA_III); |
| c->fpu_msk31 |= FPU_CSR_CONDX; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 32; |
| break; |
| case PRID_IMP_R4600: |
| c->cputype = CPU_R4600; |
| __cpu_name[cpu] = "R4600"; |
| set_isa(c, MIPS_CPU_ISA_III); |
| c->fpu_msk31 |= FPU_CSR_CONDX; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| #if 0 |
| case PRID_IMP_R4650: |
| /* |
| * This processor doesn't have an MMU, so it's not |
| * "real easy" to run Linux on it. It is left purely |
| * for documentation. Commented out because it shares |
| * its c0_prid id number with the TX3900. |
| */ |
| c->cputype = CPU_R4650; |
| __cpu_name[cpu] = "R4650"; |
| set_isa(c, MIPS_CPU_ISA_III); |
| c->fpu_msk31 |= FPU_CSR_CONDX; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| #endif |
| case PRID_IMP_R4700: |
| c->cputype = CPU_R4700; |
| __cpu_name[cpu] = "R4700"; |
| set_isa(c, MIPS_CPU_ISA_III); |
| c->fpu_msk31 |= FPU_CSR_CONDX; |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| case PRID_IMP_TX49: |
| c->cputype = CPU_TX49XX; |
| __cpu_name[cpu] = "R49XX"; |
| set_isa(c, MIPS_CPU_ISA_III); |
| c->fpu_msk31 |= FPU_CSR_CONDX; |
| c->options = R4K_OPTS | MIPS_CPU_LLSC; |
| if (!(c->processor_id & 0x08)) |
| c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR; |
| c->tlbsize = 48; |
| break; |
| case PRID_IMP_R5000: |
| c->cputype = CPU_R5000; |
| __cpu_name[cpu] = "R5000"; |
| set_isa(c, MIPS_CPU_ISA_IV); |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| case PRID_IMP_R5500: |
| c->cputype = CPU_R5500; |
| __cpu_name[cpu] = "R5500"; |
| set_isa(c, MIPS_CPU_ISA_IV); |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_WATCH | MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| case PRID_IMP_NEVADA: |
| c->cputype = CPU_NEVADA; |
| __cpu_name[cpu] = "Nevada"; |
| set_isa(c, MIPS_CPU_ISA_IV); |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_DIVEC | MIPS_CPU_LLSC; |
| c->tlbsize = 48; |
| break; |
| case PRID_IMP_RM7000: |
| c->cputype = CPU_RM7000; |
| __cpu_name[cpu] = "RM7000"; |
| set_isa(c, MIPS_CPU_ISA_IV); |
| c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_LLSC; |
| /* |
| * Undocumented RM7000: Bit 29 in the info register of |
| * the RM7000 v2.0 indicates if the TLB has 48 or 64 |
| * entries. |
| * |
| * 29 1 => 64 entry JTLB |
| * 0 => 48 entry JTLB |
| */ |
| c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48; |
| break; |
| case PRID_IMP_R10000: |
| c->cputype = CPU_R10000; |
| __cpu_name[cpu] = "R10000"; |
| set_isa(c, MIPS_CPU_ISA_IV); |
| c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | |
| MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_COUNTER | MIPS_CPU_WATCH | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 64; |
| break; |
| case PRID_IMP_R12000: |
| c->cputype = CPU_R12000; |
| __cpu_name[cpu] = "R12000"; |
| set_isa(c, MIPS_CPU_ISA_IV); |
| c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | |
| MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_COUNTER | MIPS_CPU_WATCH | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 64; |
| write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST); |
| break; |
| case PRID_IMP_R14000: |
| if (((c->processor_id >> 4) & 0x0f) > 2) { |
| c->cputype = CPU_R16000; |
| __cpu_name[cpu] = "R16000"; |
| } else { |
| c->cputype = CPU_R14000; |
| __cpu_name[cpu] = "R14000"; |
| } |
| set_isa(c, MIPS_CPU_ISA_IV); |
| c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | |
| MIPS_CPU_FPU | MIPS_CPU_32FPR | |
| MIPS_CPU_COUNTER | MIPS_CPU_WATCH | |
| MIPS_CPU_LLSC; |
| c->tlbsize = 64; |
| write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST); |
| break; |
| case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */ |
| switch (c->processor_id & PRID_REV_MASK) { |
| case PRID_REV_LOONGSON2E: |
| c->cputype = CPU_LOONGSON2EF; |
| __cpu_name[cpu] = "ICT Loongson-2"; |
| set_elf_platform(cpu, "loongson2e"); |
| set_isa(c, MIPS_CPU_ISA_III); |
| c->fpu_msk31 |= FPU_CSR_CONDX; |
| break; |
| case PRID_REV_LOONGSON2F: |
| c->cputype = CPU_LOONGSON2EF; |
| __cpu_name[cpu] = "ICT Loongson-2"; |
| set_elf_platform(cpu, "loongson2f"); |
| set_isa(c, MIPS_CPU_ISA_III); |
| c->fpu_msk31 |= FPU_CSR_CONDX; |
| break; |
| case PRID_REV_LOONGSON3A_R1: |
| c->cputype = CPU_LOONGSON64; |
| __cpu_name[cpu] = "ICT Loongson-3"; |
| set_elf_platform(cpu, "loongson3a"); |
| set_isa(c, MIPS_CPU_ISA_M64R1); |
| c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | |
| MIPS_ASE_LOONGSON_EXT); |
| break; |
| case PRID_REV_LOONGSON3B_R1: |
| case PRID_REV_LOONGSON3B_R2: |
| c->cputype = CPU_LOONGSON64; |
| __cpu_name[cpu] = "ICT Loongson-3"; |
| set_elf_platform(cpu, "loongson3b"); |
| set_isa(c, MIPS_CPU_ISA_M64R1); |
| c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | |
| MIPS_ASE_LOONGSON_EXT); |
| break; |
| } |
| |
| c->options = R4K_OPTS | |
| MIPS_CPU_FPU | MIPS_CPU_LLSC | |
| MIPS_CPU_32FPR; |
| c->tlbsize = 64; |
| set_cpu_asid_mask(c, MIPS_ENTRYHI_ASID); |
| c->writecombine = _CACHE_UNCACHED_ACCELERATED; |
| break; |
| case PRID_IMP_LOONGSON_32: /* Loongson-1 */ |
| decode_configs(c); |
| |
| c->cputype = CPU_LOONGSON32; |
| |
| switch (c->processor_id & PRID_REV_MASK) { |
| case PRID_REV_LOONGSON1B: |
| __cpu_name[cpu] = "Loongson 1B"; |
| break; |
| } |
| |
| break; |
| } |
| } |
| |
| static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| c->writecombine = _CACHE_UNCACHED_ACCELERATED; |
| switch (c->processor_id & PRID_IMP_MASK) { |
| case PRID_IMP_QEMU_GENERIC: |
| c->writecombine = _CACHE_UNCACHED; |
| c->cputype = CPU_QEMU_GENERIC; |
| __cpu_name[cpu] = "MIPS GENERIC QEMU"; |
| break; |
| case PRID_IMP_4KC: |
| c->cputype = CPU_4KC; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS 4Kc"; |
| break; |
| case PRID_IMP_4KEC: |
| case PRID_IMP_4KECR2: |
| c->cputype = CPU_4KEC; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS 4KEc"; |
| break; |
| case PRID_IMP_4KSC: |
| case PRID_IMP_4KSD: |
| c->cputype = CPU_4KSC; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS 4KSc"; |
| break; |
| case PRID_IMP_5KC: |
| c->cputype = CPU_5KC; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS 5Kc"; |
| break; |
| case PRID_IMP_5KE: |
| c->cputype = CPU_5KE; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS 5KE"; |
| break; |
| case PRID_IMP_20KC: |
| c->cputype = CPU_20KC; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS 20Kc"; |
| break; |
| case PRID_IMP_24K: |
| c->cputype = CPU_24K; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS 24Kc"; |
| break; |
| case PRID_IMP_24KE: |
| c->cputype = CPU_24K; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS 24KEc"; |
| break; |
| case PRID_IMP_25KF: |
| c->cputype = CPU_25KF; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS 25Kc"; |
| break; |
| case PRID_IMP_34K: |
| c->cputype = CPU_34K; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS 34Kc"; |
| cpu_set_mt_per_tc_perf(c); |
| break; |
| case PRID_IMP_74K: |
| c->cputype = CPU_74K; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS 74Kc"; |
| break; |
| case PRID_IMP_M14KC: |
| c->cputype = CPU_M14KC; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS M14Kc"; |
| break; |
| case PRID_IMP_M14KEC: |
| c->cputype = CPU_M14KEC; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS M14KEc"; |
| break; |
| case PRID_IMP_1004K: |
| c->cputype = CPU_1004K; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS 1004Kc"; |
| cpu_set_mt_per_tc_perf(c); |
| break; |
| case PRID_IMP_1074K: |
| c->cputype = CPU_1074K; |
| c->writecombine = _CACHE_UNCACHED; |
| __cpu_name[cpu] = "MIPS 1074Kc"; |
| break; |
| case PRID_IMP_INTERAPTIV_UP: |
| c->cputype = CPU_INTERAPTIV; |
| __cpu_name[cpu] = "MIPS interAptiv"; |
| cpu_set_mt_per_tc_perf(c); |
| break; |
| case PRID_IMP_INTERAPTIV_MP: |
| c->cputype = CPU_INTERAPTIV; |
| __cpu_name[cpu] = "MIPS interAptiv (multi)"; |
| cpu_set_mt_per_tc_perf(c); |
| break; |
| case PRID_IMP_PROAPTIV_UP: |
| c->cputype = CPU_PROAPTIV; |
| __cpu_name[cpu] = "MIPS proAptiv"; |
| break; |
| case PRID_IMP_PROAPTIV_MP: |
| c->cputype = CPU_PROAPTIV; |
| __cpu_name[cpu] = "MIPS proAptiv (multi)"; |
| break; |
| case PRID_IMP_P5600: |
| c->cputype = CPU_P5600; |
| __cpu_name[cpu] = "MIPS P5600"; |
| break; |
| case PRID_IMP_P6600: |
| c->cputype = CPU_P6600; |
| __cpu_name[cpu] = "MIPS P6600"; |
| break; |
| case PRID_IMP_I6400: |
| c->cputype = CPU_I6400; |
| __cpu_name[cpu] = "MIPS I6400"; |
| break; |
| case PRID_IMP_I6500: |
| c->cputype = CPU_I6500; |
| __cpu_name[cpu] = "MIPS I6500"; |
| break; |
| case PRID_IMP_M5150: |
| c->cputype = CPU_M5150; |
| __cpu_name[cpu] = "MIPS M5150"; |
| break; |
| case PRID_IMP_M6250: |
| c->cputype = CPU_M6250; |
| __cpu_name[cpu] = "MIPS M6250"; |
| break; |
| } |
| |
| decode_configs(c); |
| |
| spram_config(); |
| |
| mm_config(c); |
| |
| switch (__get_cpu_type(c->cputype)) { |
| case CPU_M5150: |
| case CPU_P5600: |
| set_isa(c, MIPS_CPU_ISA_M32R5); |
| break; |
| case CPU_I6500: |
| c->options |= MIPS_CPU_SHARED_FTLB_ENTRIES; |
| fallthrough; |
| case CPU_I6400: |
| c->options |= MIPS_CPU_SHARED_FTLB_RAM; |
| fallthrough; |
| default: |
| break; |
| } |
| |
| /* Recent MIPS cores use the implementation-dependent ExcCode 16 for |
| * cache/FTLB parity exceptions. |
| */ |
| switch (__get_cpu_type(c->cputype)) { |
| case CPU_PROAPTIV: |
| case CPU_P5600: |
| case CPU_P6600: |
| case CPU_I6400: |
| case CPU_I6500: |
| c->options |= MIPS_CPU_FTLBPAREX; |
| break; |
| } |
| } |
| |
| static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| switch (c->processor_id & PRID_IMP_MASK) { |
| case PRID_IMP_AU1_REV1: |
| case PRID_IMP_AU1_REV2: |
| c->cputype = CPU_ALCHEMY; |
| switch ((c->processor_id >> 24) & 0xff) { |
| case 0: |
| __cpu_name[cpu] = "Au1000"; |
| break; |
| case 1: |
| __cpu_name[cpu] = "Au1500"; |
| break; |
| case 2: |
| __cpu_name[cpu] = "Au1100"; |
| break; |
| case 3: |
| __cpu_name[cpu] = "Au1550"; |
| break; |
| case 4: |
| __cpu_name[cpu] = "Au1200"; |
| if ((c->processor_id & PRID_REV_MASK) == 2) |
| __cpu_name[cpu] = "Au1250"; |
| break; |
| case 5: |
| __cpu_name[cpu] = "Au1210"; |
| break; |
| default: |
| __cpu_name[cpu] = "Au1xxx"; |
| break; |
| } |
| break; |
| case PRID_IMP_NETLOGIC_AU13XX: |
| c->cputype = CPU_ALCHEMY; |
| __cpu_name[cpu] = "Au1300"; |
| break; |
| } |
| } |
| |
| static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| |
| c->writecombine = _CACHE_UNCACHED_ACCELERATED; |
| switch (c->processor_id & PRID_IMP_MASK) { |
| case PRID_IMP_SB1: |
| c->cputype = CPU_SB1; |
| __cpu_name[cpu] = "SiByte SB1"; |
| /* FPU in pass1 is known to have issues. */ |
| if ((c->processor_id & PRID_REV_MASK) < 0x02) |
| c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR); |
| break; |
| case PRID_IMP_SB1A: |
| c->cputype = CPU_SB1A; |
| __cpu_name[cpu] = "SiByte SB1A"; |
| break; |
| } |
| } |
| |
| static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| switch (c->processor_id & PRID_IMP_MASK) { |
| case PRID_IMP_SR71000: |
| c->cputype = CPU_SR71000; |
| __cpu_name[cpu] = "Sandcraft SR71000"; |
| c->scache.ways = 8; |
| c->tlbsize = 64; |
| break; |
| } |
| } |
| |
| static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| switch (c->processor_id & PRID_IMP_MASK) { |
| case PRID_IMP_PR4450: |
| c->cputype = CPU_PR4450; |
| __cpu_name[cpu] = "Philips PR4450"; |
| set_isa(c, MIPS_CPU_ISA_M32R1); |
| break; |
| } |
| } |
| |
| static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| switch (c->processor_id & PRID_IMP_MASK) { |
| case PRID_IMP_BMIPS32_REV4: |
| case PRID_IMP_BMIPS32_REV8: |
| c->cputype = CPU_BMIPS32; |
| __cpu_name[cpu] = "Broadcom BMIPS32"; |
| set_elf_platform(cpu, "bmips32"); |
| break; |
| case PRID_IMP_BMIPS3300: |
| case PRID_IMP_BMIPS3300_ALT: |
| case PRID_IMP_BMIPS3300_BUG: |
| c->cputype = CPU_BMIPS3300; |
| __cpu_name[cpu] = "Broadcom BMIPS3300"; |
| set_elf_platform(cpu, "bmips3300"); |
| reserve_exception_space(0x400, VECTORSPACING * 64); |
| break; |
| case PRID_IMP_BMIPS43XX: { |
| int rev = c->processor_id & PRID_REV_MASK; |
| |
| if (rev >= PRID_REV_BMIPS4380_LO && |
| rev <= PRID_REV_BMIPS4380_HI) { |
| c->cputype = CPU_BMIPS4380; |
| __cpu_name[cpu] = "Broadcom BMIPS4380"; |
| set_elf_platform(cpu, "bmips4380"); |
| c->options |= MIPS_CPU_RIXI; |
| reserve_exception_space(0x400, VECTORSPACING * 64); |
| } else { |
| c->cputype = CPU_BMIPS4350; |
| __cpu_name[cpu] = "Broadcom BMIPS4350"; |
| set_elf_platform(cpu, "bmips4350"); |
| } |
| break; |
| } |
| case PRID_IMP_BMIPS5000: |
| case PRID_IMP_BMIPS5200: |
| c->cputype = CPU_BMIPS5000; |
| if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_BMIPS5200) |
| __cpu_name[cpu] = "Broadcom BMIPS5200"; |
| else |
| __cpu_name[cpu] = "Broadcom BMIPS5000"; |
| set_elf_platform(cpu, "bmips5000"); |
| c->options |= MIPS_CPU_ULRI | MIPS_CPU_RIXI; |
| reserve_exception_space(0x1000, VECTORSPACING * 64); |
| break; |
| } |
| } |
| |
| static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| /* Octeon has different cache interface */ |
| c->options &= ~MIPS_CPU_4K_CACHE; |
| switch (c->processor_id & PRID_IMP_MASK) { |
| case PRID_IMP_CAVIUM_CN38XX: |
| case PRID_IMP_CAVIUM_CN31XX: |
| case PRID_IMP_CAVIUM_CN30XX: |
| c->cputype = CPU_CAVIUM_OCTEON; |
| __cpu_name[cpu] = "Cavium Octeon"; |
| goto platform; |
| case PRID_IMP_CAVIUM_CN58XX: |
| case PRID_IMP_CAVIUM_CN56XX: |
| case PRID_IMP_CAVIUM_CN50XX: |
| case PRID_IMP_CAVIUM_CN52XX: |
| c->cputype = CPU_CAVIUM_OCTEON_PLUS; |
| __cpu_name[cpu] = "Cavium Octeon+"; |
| platform: |
| set_elf_platform(cpu, "octeon"); |
| break; |
| case PRID_IMP_CAVIUM_CN61XX: |
| case PRID_IMP_CAVIUM_CN63XX: |
| case PRID_IMP_CAVIUM_CN66XX: |
| case PRID_IMP_CAVIUM_CN68XX: |
| case PRID_IMP_CAVIUM_CNF71XX: |
| c->cputype = CPU_CAVIUM_OCTEON2; |
| __cpu_name[cpu] = "Cavium Octeon II"; |
| set_elf_platform(cpu, "octeon2"); |
| break; |
| case PRID_IMP_CAVIUM_CN70XX: |
| case PRID_IMP_CAVIUM_CN73XX: |
| case PRID_IMP_CAVIUM_CNF75XX: |
| case PRID_IMP_CAVIUM_CN78XX: |
| c->cputype = CPU_CAVIUM_OCTEON3; |
| __cpu_name[cpu] = "Cavium Octeon III"; |
| set_elf_platform(cpu, "octeon3"); |
| break; |
| default: |
| printk(KERN_INFO "Unknown Octeon chip!\n"); |
| c->cputype = CPU_UNKNOWN; |
| break; |
| } |
| } |
| |
| #ifdef CONFIG_CPU_LOONGSON64 |
| #include <loongson_regs.h> |
| |
| static inline void decode_cpucfg(struct cpuinfo_mips *c) |
| { |
| u32 cfg1 = read_cpucfg(LOONGSON_CFG1); |
| u32 cfg2 = read_cpucfg(LOONGSON_CFG2); |
| u32 cfg3 = read_cpucfg(LOONGSON_CFG3); |
| |
| if (cfg1 & LOONGSON_CFG1_MMI) |
| c->ases |= MIPS_ASE_LOONGSON_MMI; |
| |
| if (cfg2 & LOONGSON_CFG2_LEXT1) |
| c->ases |= MIPS_ASE_LOONGSON_EXT; |
| |
| if (cfg2 & LOONGSON_CFG2_LEXT2) |
| c->ases |= MIPS_ASE_LOONGSON_EXT2; |
| |
| if (cfg2 & LOONGSON_CFG2_LSPW) { |
| c->options |= MIPS_CPU_LDPTE; |
| c->guest.options |= MIPS_CPU_LDPTE; |
| } |
| |
| if (cfg3 & LOONGSON_CFG3_LCAMP) |
| c->ases |= MIPS_ASE_LOONGSON_CAM; |
| } |
| |
| static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| c->cputype = CPU_LOONGSON64; |
| |
| /* All Loongson processors covered here define ExcCode 16 as GSExc. */ |
| decode_configs(c); |
| c->options |= MIPS_CPU_GSEXCEX; |
| |
| switch (c->processor_id & PRID_IMP_MASK) { |
| case PRID_IMP_LOONGSON_64R: /* Loongson-64 Reduced */ |
| switch (c->processor_id & PRID_REV_MASK) { |
| case PRID_REV_LOONGSON2K_R1_0: |
| case PRID_REV_LOONGSON2K_R1_1: |
| case PRID_REV_LOONGSON2K_R1_2: |
| case PRID_REV_LOONGSON2K_R1_3: |
| __cpu_name[cpu] = "Loongson-2K"; |
| set_elf_platform(cpu, "gs264e"); |
| set_isa(c, MIPS_CPU_ISA_M64R2); |
| break; |
| } |
| c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_EXT | |
| MIPS_ASE_LOONGSON_EXT2); |
| break; |
| case PRID_IMP_LOONGSON_64C: /* Loongson-3 Classic */ |
| switch (c->processor_id & PRID_REV_MASK) { |
| case PRID_REV_LOONGSON3A_R2_0: |
| case PRID_REV_LOONGSON3A_R2_1: |
| __cpu_name[cpu] = "ICT Loongson-3"; |
| set_elf_platform(cpu, "loongson3a"); |
| set_isa(c, MIPS_CPU_ISA_M64R2); |
| break; |
| case PRID_REV_LOONGSON3A_R3_0: |
| case PRID_REV_LOONGSON3A_R3_1: |
| __cpu_name[cpu] = "ICT Loongson-3"; |
| set_elf_platform(cpu, "loongson3a"); |
| set_isa(c, MIPS_CPU_ISA_M64R2); |
| break; |
| } |
| /* |
| * Loongson-3 Classic did not implement MIPS standard TLBINV |
| * but implemented TLBINVF and EHINV. As currently we're only |
| * using these two features, enable MIPS_CPU_TLBINV as well. |
| * |
| * Also some early Loongson-3A2000 had wrong TLB type in Config |
| * register, we correct it here. |
| */ |
| c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE; |
| c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | |
| MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2); |
| c->ases &= ~MIPS_ASE_VZ; /* VZ of Loongson-3A2000/3000 is incomplete */ |
| change_c0_config6(LOONGSON_CONF6_EXTIMER | LOONGSON_CONF6_INTIMER, |
| LOONGSON_CONF6_INTIMER); |
| break; |
| case PRID_IMP_LOONGSON_64G: |
| __cpu_name[cpu] = "ICT Loongson-3"; |
| set_elf_platform(cpu, "loongson3a"); |
| set_isa(c, MIPS_CPU_ISA_M64R2); |
| decode_cpucfg(c); |
| change_c0_config6(LOONGSON_CONF6_EXTIMER | LOONGSON_CONF6_INTIMER, |
| LOONGSON_CONF6_INTIMER); |
| break; |
| default: |
| panic("Unknown Loongson Processor ID!"); |
| break; |
| } |
| } |
| #else |
| static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) { } |
| #endif |
| |
| static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu) |
| { |
| decode_configs(c); |
| |
| /* |
| * XBurst misses a config2 register, so config3 decode was skipped in |
| * decode_configs(). |
| */ |
| decode_config3(c); |
| |
| /* XBurst does not implement the CP0 counter. */ |
| c->options &= ~MIPS_CPU_COUNTER; |
| BUG_ON(__builtin_constant_p(cpu_has_counter) && cpu_has_counter); |
| |
| /* XBurst has virtually tagged icache */ |
| c->icache.flags |= MIPS_CACHE_VTAG; |
| |
| switch (c->processor_id & PRID_IMP_MASK) { |
| |
| /* XBurst®1 with MXU1.0/MXU1.1 SIMD ISA */ |
| case PRID_IMP_XBURST_REV1: |
| |
| /* |
| * The XBurst core by default attempts to avoid branch target |
| * buffer lookups by detecting & special casing loops. This |
| * feature will cause BogoMIPS and lpj calculate in error. |
| * Set cp0 config7 bit 4 to disable this feature. |
| */ |
| set_c0_config7(MIPS_CONF7_BTB_LOOP_EN); |
| |
| switch (c->processor_id & PRID_COMP_MASK) { |
| |
| /* |
| * The config0 register in the XBurst CPUs with a processor ID of |
| * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible, |
| * but they don't actually support this ISA. |
| */ |
| case PRID_COMP_INGENIC_D0: |
| c->isa_level &= ~MIPS_CPU_ISA_M32R2; |
| |
| /* FPU is not properly detected on JZ4760(B). */ |
| if (c->processor_id == 0x2ed0024f) |
| c->options |= MIPS_CPU_FPU; |
| |
| fallthrough; |
| |
| /* |
| * The config0 register in the XBurst CPUs with a processor ID of |
| * PRID_COMP_INGENIC_D0 or PRID_COMP_INGENIC_D1 has an abandoned |
| * huge page tlb mode, this mode is not compatible with the MIPS |
| * standard, it will cause tlbmiss and into an infinite loop |
| * (line 21 in the tlb-funcs.S) when starting the init process. |
| * After chip reset, the default is HPTLB mode, Write 0xa9000000 |
| * to cp0 register 5 sel 4 to switch back to VTLB mode to prevent |
| * getting stuck. |
| */ |
| case PRID_COMP_INGENIC_D1: |
| write_c0_page_ctrl(XBURST_PAGECTRL_HPTLB_DIS); |
| break; |
| |
| default: |
| break; |
| } |
| fallthrough; |
| |
| /* XBurst®1 with MXU2.0 SIMD ISA */ |
| case PRID_IMP_XBURST_REV2: |
| /* Ingenic uses the WA bit to achieve write-combine memory writes */ |
| c->writecombine = _CACHE_CACHABLE_WA; |
| c->cputype = CPU_XBURST; |
| __cpu_name[cpu] = "Ingenic XBurst"; |
| break; |
| |
| /* XBurst®2 with MXU2.1 SIMD ISA */ |
| case PRID_IMP_XBURST2: |
| c->cputype = CPU_XBURST; |
| __cpu_name[cpu] = "Ingenic XBurst II"; |
| break; |
| |
| default: |
| panic("Unknown Ingenic Processor ID!"); |
| break; |
| } |
| } |
| |
| #ifdef CONFIG_64BIT |
| /* For use by uaccess.h */ |
| u64 __ua_limit; |
| EXPORT_SYMBOL(__ua_limit); |
| #endif |
| |
| const char *__cpu_name[NR_CPUS]; |
| const char *__elf_platform; |
| const char *__elf_base_platform; |
| |
| void cpu_probe(void) |
| { |
| struct cpuinfo_mips *c = ¤t_cpu_data; |
| unsigned int cpu = smp_processor_id(); |
| |
| /* |
| * Set a default elf platform, cpu probe may later |
| * overwrite it with a more precise value |
| */ |
| set_elf_platform(cpu, "mips"); |
| |
| c->processor_id = PRID_IMP_UNKNOWN; |
| c->fpu_id = FPIR_IMP_NONE; |
| c->cputype = CPU_UNKNOWN; |
| c->writecombine = _CACHE_UNCACHED; |
| |
| c->fpu_csr31 = FPU_CSR_RN; |
| c->fpu_msk31 = FPU_CSR_RSVD | FPU_CSR_ABS2008 | FPU_CSR_NAN2008; |
| |
| c->processor_id = read_c0_prid(); |
| switch (c->processor_id & PRID_COMP_MASK) { |
| case PRID_COMP_LEGACY: |
| cpu_probe_legacy(c, cpu); |
| break; |
| case PRID_COMP_MIPS: |
| cpu_probe_mips(c, cpu); |
| break; |
| case PRID_COMP_ALCHEMY: |
| case PRID_COMP_NETLOGIC: |
| cpu_probe_alchemy(c, cpu); |
| break; |
| case PRID_COMP_SIBYTE: |
| cpu_probe_sibyte(c, cpu); |
| break; |
| case PRID_COMP_BROADCOM: |
| cpu_probe_broadcom(c, cpu); |
| break; |
| case PRID_COMP_SANDCRAFT: |
| cpu_probe_sandcraft(c, cpu); |
| break; |
| case PRID_COMP_NXP: |
| cpu_probe_nxp(c, cpu); |
| break; |
| case PRID_COMP_CAVIUM: |
| cpu_probe_cavium(c, cpu); |
| break; |
| case PRID_COMP_LOONGSON: |
| cpu_probe_loongson(c, cpu); |
| break; |
| case PRID_COMP_INGENIC_13: |
| case PRID_COMP_INGENIC_D0: |
| case PRID_COMP_INGENIC_D1: |
| case PRID_COMP_INGENIC_E1: |
| cpu_probe_ingenic(c, cpu); |
| break; |
| } |
| |
| BUG_ON(!__cpu_name[cpu]); |
| BUG_ON(c->cputype == CPU_UNKNOWN); |
| |
| /* |
| * Platform code can force the cpu type to optimize code |
| * generation. In that case be sure the cpu type is correctly |
| * manually setup otherwise it could trigger some nasty bugs. |
| */ |
| BUG_ON(current_cpu_type() != c->cputype); |
| |
| if (cpu_has_rixi) { |
| /* Enable the RIXI exceptions */ |
| set_c0_pagegrain(PG_IEC); |
| back_to_back_c0_hazard(); |
| /* Verify the IEC bit is set */ |
| if (read_c0_pagegrain() & PG_IEC) |
| c->options |= MIPS_CPU_RIXIEX; |
| } |
| |
| if (mips_fpu_disabled) |
| c->options &= ~MIPS_CPU_FPU; |
| |
| if (mips_dsp_disabled) |
| c->ases &= ~(MIPS_ASE_DSP | MIPS_ASE_DSP2P); |
| |
| if (mips_htw_disabled) { |
| c->options &= ~MIPS_CPU_HTW; |
| write_c0_pwctl(read_c0_pwctl() & |
| ~(1 << MIPS_PWCTL_PWEN_SHIFT)); |
| } |
| |
| if (c->options & MIPS_CPU_FPU) |
| cpu_set_fpu_opts(c); |
| else |
| cpu_set_nofpu_opts(c); |
| |
| if (cpu_has_mips_r2_r6) { |
| c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1; |
| /* R2 has Performance Counter Interrupt indicator */ |
| c->options |= MIPS_CPU_PCI; |
| } |
| else |
| c->srsets = 1; |
| |
| if (cpu_has_mips_r6) |
| elf_hwcap |= HWCAP_MIPS_R6; |
| |
| if (cpu_has_msa) { |
| c->msa_id = cpu_get_msa_id(); |
| WARN(c->msa_id & MSA_IR_WRPF, |
| "Vector register partitioning unimplemented!"); |
| elf_hwcap |= HWCAP_MIPS_MSA; |
| } |
| |
| if (cpu_has_mips16) |
| elf_hwcap |= HWCAP_MIPS_MIPS16; |
| |
| if (cpu_has_mdmx) |
| elf_hwcap |= HWCAP_MIPS_MDMX; |
| |
| if (cpu_has_mips3d) |
| elf_hwcap |= HWCAP_MIPS_MIPS3D; |
| |
| if (cpu_has_smartmips) |
| elf_hwcap |= HWCAP_MIPS_SMARTMIPS; |
| |
| if (cpu_has_dsp) |
| elf_hwcap |= HWCAP_MIPS_DSP; |
| |
| if (cpu_has_dsp2) |
| elf_hwcap |= HWCAP_MIPS_DSP2; |
| |
| if (cpu_has_dsp3) |
| elf_hwcap |= HWCAP_MIPS_DSP3; |
| |
| if (cpu_has_mips16e2) |
| elf_hwcap |= HWCAP_MIPS_MIPS16E2; |
| |
| if (cpu_has_loongson_mmi) |
| elf_hwcap |= HWCAP_LOONGSON_MMI; |
| |
| if (cpu_has_loongson_ext) |
| elf_hwcap |= HWCAP_LOONGSON_EXT; |
| |
| if (cpu_has_loongson_ext2) |
| elf_hwcap |= HWCAP_LOONGSON_EXT2; |
| |
| if (cpu_has_vz) |
| cpu_probe_vz(c); |
| |
| cpu_probe_vmbits(c); |
| |
| /* Synthesize CPUCFG data if running on Loongson processors; |
| * no-op otherwise. |
| * |
| * This looks at previously probed features, so keep this at bottom. |
| */ |
| loongson3_cpucfg_synthesize_data(c); |
| |
| #ifdef CONFIG_64BIT |
| if (cpu == 0) |
| __ua_limit = ~((1ull << cpu_vmbits) - 1); |
| #endif |
| |
| reserve_exception_space(0, 0x1000); |
| } |
| |
| void cpu_report(void) |
| { |
| struct cpuinfo_mips *c = ¤t_cpu_data; |
| |
| pr_info("CPU%d revision is: %08x (%s)\n", |
| smp_processor_id(), c->processor_id, cpu_name_string()); |
| if (c->options & MIPS_CPU_FPU) |
| printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id); |
| if (cpu_has_msa) |
| pr_info("MSA revision is: %08x\n", c->msa_id); |
| } |
| |
| void cpu_set_cluster(struct cpuinfo_mips *cpuinfo, unsigned int cluster) |
| { |
| /* Ensure the core number fits in the field */ |
| WARN_ON(cluster > (MIPS_GLOBALNUMBER_CLUSTER >> |
| MIPS_GLOBALNUMBER_CLUSTER_SHF)); |
| |
| cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_CLUSTER; |
| cpuinfo->globalnumber |= cluster << MIPS_GLOBALNUMBER_CLUSTER_SHF; |
| } |
| |
| void cpu_set_core(struct cpuinfo_mips *cpuinfo, unsigned int core) |
| { |
| /* Ensure the core number fits in the field */ |
| WARN_ON(core > (MIPS_GLOBALNUMBER_CORE >> MIPS_GLOBALNUMBER_CORE_SHF)); |
| |
| cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_CORE; |
| cpuinfo->globalnumber |= core << MIPS_GLOBALNUMBER_CORE_SHF; |
| } |
| |
| void cpu_set_vpe_id(struct cpuinfo_mips *cpuinfo, unsigned int vpe) |
| { |
| /* Ensure the VP(E) ID fits in the field */ |
| WARN_ON(vpe > (MIPS_GLOBALNUMBER_VP >> MIPS_GLOBALNUMBER_VP_SHF)); |
| |
| /* Ensure we're not using VP(E)s without support */ |
| WARN_ON(vpe && !IS_ENABLED(CONFIG_MIPS_MT_SMP) && |
| !IS_ENABLED(CONFIG_CPU_MIPSR6)); |
| |
| cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_VP; |
| cpuinfo->globalnumber |= vpe << MIPS_GLOBALNUMBER_VP_SHF; |
| } |