blob: 84c4111293bda6db7fc970cc066fd0dca1bfeb11 [file] [log] [blame]
* Rockchip Pinmux Controller
The Rockchip Pinmux Controller, enables the IC
to share one PAD to several functional blocks. The sharing is done by
multiplexing the PAD input/output signals. For each PAD there are several
muxing options with option 0 being the use as a GPIO.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
The Rockchip pin configuration node is a node of a group of pins which can be
used for a specific device or function. This node represents both mux and
config of the pins in that group. The 'pins' selects the function mode(also
named pin mode) this pin can work on and the 'config' configures various pad
settings such as pull-up, etc.
The pins are grouped into up to 5 individual pin banks which need to be
defined as gpio sub-nodes of the pinmux controller.
Required properties for iomux controller:
- compatible: should be
"rockchip,px30-pinctrl": for Rockchip PX30
"rockchip,rv1108-pinctrl": for Rockchip RV1108
"rockchip,rk2928-pinctrl": for Rockchip RK2928
"rockchip,rk3066a-pinctrl": for Rockchip RK3066a
"rockchip,rk3066b-pinctrl": for Rockchip RK3066b
"rockchip,rk3128-pinctrl": for Rockchip RK3128
"rockchip,rk3188-pinctrl": for Rockchip RK3188
"rockchip,rk3228-pinctrl": for Rockchip RK3228
"rockchip,rk3288-pinctrl": for Rockchip RK3288
"rockchip,rk3308-pinctrl": for Rockchip RK3308
"rockchip,rk3328-pinctrl": for Rockchip RK3328
"rockchip,rk3368-pinctrl": for Rockchip RK3368
"rockchip,rk3399-pinctrl": for Rockchip RK3399
"rockchip,rk3568-pinctrl": for Rockchip RK3568
- rockchip,grf: phandle referencing a syscon providing the
"general register files"
Optional properties for iomux controller:
- rockchip,pmu: phandle referencing a syscon providing the pmu registers
as some SoCs carry parts of the iomux controller registers there.
Required for at least rk3188 and rk3288. On the rk3368 this should
point to the PMUGRF syscon.
Deprecated properties for iomux controller:
- reg: first element is the general register space of the iomux controller
It should be large enough to contain also separate pull registers.
second element is the separate pull register space of the rk3188.
Use rockchip,grf and rockchip,pmu described above instead.
Required properties for gpio sub nodes:
See rockchip,gpio-bank.yaml
Required properties for pin configuration node:
- rockchip,pins: 3 integers array, represents a group of pins mux and config
setting. The format is rockchip,pins = <PIN_BANK PIN_BANK_IDX MUX &phandle>.
The MUX 0 means gpio and MUX 1 to N mean the specific device function.
The phandle of a node containing the generic pinconfig options
to use, as described in pinctrl-bindings.txt in this directory.
Examples:
#include <dt-bindings/pinctrl/rockchip.h>
...
pinctrl@20008000 {
compatible = "rockchip,rk3066a-pinctrl";
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio0: gpio0@20034000 {
compatible = "rockchip,gpio-bank";
reg = <0x20034000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_gates8 9>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
...
pcfg_pull_default: pcfg_pull_default {
bias-pull-pin-default
};
uart2 {
uart2_xfer: uart2-xfer {
rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
<1 RK_PB1 1 &pcfg_pull_default>;
};
};
};
uart2: serial@20064000 {
compatible = "snps,dw-apb-uart";
reg = <0x20064000 0x400>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <1>;
clocks = <&mux_uart2>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_xfer>;
};