blob: f242b937f88c8ab488970b007ac55b7b6bbc4e33 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
*/
#include "dra72-evm-common.dtsi"
#include "dra72x-mmc-iodelay.dtsi"
#include <dt-bindings/net/ti-dp83867.h>
/ {
model = "TI DRA722 Rev C EVM";
memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
ipu2_cma_pool: ipu2_cma@95800000 {
compatible = "shared-dma-pool";
reg = <0x0 0x95800000 0x0 0x3800000>;
reusable;
status = "okay";
};
dsp1_cma_pool: dsp1_cma@99000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x99000000 0x0 0x4000000>;
reusable;
status = "okay";
};
ipu1_cma_pool: ipu1_cma@9d000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x9d000000 0x0 0x2000000>;
reusable;
status = "okay";
};
};
evm_1v8_sw: fixedregulator-evm_1v8 {
compatible = "regulator-fixed";
regulator-name = "evm_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&smps4_reg>;
regulator-always-on;
regulator-boot-on;
};
};
&i2c1 {
tps65917: tps65917@58 {
reg = <0x58>;
interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
};
};
#include "dra72-evm-tps65917.dtsi"
&ldo2_reg {
/* LDO2_OUT --> VDDA_1V8_PHY2 */
regulator-always-on;
regulator-boot-on;
};
&hdmi {
vdda-supply = <&ldo2_reg>;
};
&pcf_gpio_21 {
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
};
&mac_sw {
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
<&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */
<&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */
status = "okay";
};
&cpsw_port1 {
phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
ti,dual-emac-pvid = <1>;
};
&cpsw_port2 {
phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
ti,dual-emac-pvid = <2>;
};
&davinci_mdio_sw {
dp83867_0: ethernet-phy@2 {
reg = <2>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
ti,min-output-impedance;
interrupt-parent = <&gpio6>;
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
ti,dp83867-rxctrl-strap-quirk;
};
dp83867_1: ethernet-phy@3 {
reg = <3>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
ti,min-output-impedance;
interrupt-parent = <&gpio6>;
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
ti,dp83867-rxctrl-strap-quirk;
};
};
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
vqmmc-supply = <&ldo1_reg>;
};
&mmc2 {
pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
vmmc-supply = <&evm_1v8_sw>;
};
&ipu2 {
status = "okay";
memory-region = <&ipu2_cma_pool>;
};
&ipu1 {
status = "okay";
memory-region = <&ipu1_cma_pool>;
};
&dsp1 {
status = "okay";
memory-region = <&dsp1_cma_pool>;
};