| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * omap3-n950.dts - Device Tree file for Nokia N950 |
| * |
| * Written by: Aaro Koskinen <aaro.koskinen@iki.fi> |
| */ |
| |
| /dts-v1/; |
| |
| #include "omap3-n950-n9.dtsi" |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| model = "Nokia N950"; |
| compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3"; |
| |
| keys { |
| compatible = "gpio-keys"; |
| |
| keypad_slide { |
| label = "Keypad Slide"; |
| gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* 109 */ |
| linux,input-type = <EV_SW>; |
| linux,code = <SW_KEYPAD_SLIDE>; |
| wakeup-source; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&keypad_slide_pins>; |
| }; |
| }; |
| }; |
| |
| &omap3_pmx_core { |
| keypad_slide_pins: pinmux_debug_led_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */ |
| >; |
| }; |
| }; |
| |
| &omap3_pmx_core { |
| spi4_pins: pinmux_spi4_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ |
| OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ |
| OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ |
| OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ |
| >; |
| }; |
| }; |
| |
| &omap3_pmx_core { |
| dsi_pins: pinmux_dsi_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE1) /* dsi_dx0 - data0+ */ |
| OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE1) /* dsi_dy0 - data0- */ |
| OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE1) /* dsi_dx1 - clk+ */ |
| OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE1) /* dsi_dy1 - clk- */ |
| OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE1) /* dsi_dx2 - data1+ */ |
| OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE1) /* dsi_dy2 - data1- */ |
| >; |
| }; |
| |
| display_pins: pinmux_display_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x20ca, PIN_INPUT | MUX_MODE4) /* gpio 62 - display te */ |
| OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 - display reset */ |
| >; |
| }; |
| }; |
| |
| &i2c2 { |
| smia_1: camera@10 { |
| compatible = "nokia,smia"; |
| reg = <0x10>; |
| /* No reset gpio */ |
| vana-supply = <&vaux3>; |
| clocks = <&isp 0>; |
| clock-frequency = <9600000>; |
| flash-leds = <&as3645a_flash &as3645a_indicator>; |
| port { |
| smia_1_1: endpoint { |
| link-frequencies = /bits/ 64 <210000000 333600000 398400000>; |
| clock-lanes = <0>; |
| data-lanes = <1 2>; |
| remote-endpoint = <&csi2a_ep>; |
| }; |
| }; |
| }; |
| }; |
| |
| &isp { |
| vdd-csiphy1-supply = <&vaux2>; |
| vdd-csiphy2-supply = <&vaux2>; |
| ports { |
| port@2 { |
| reg = <2>; |
| csi2a_ep: endpoint { |
| remote-endpoint = <&smia_1_1>; |
| clock-lanes = <2>; |
| data-lanes = <3 1>; |
| crc = <1>; |
| lane-polarities = <1 1 1>; |
| }; |
| }; |
| }; |
| }; |
| |
| &mcspi4 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi4_pins>; |
| |
| wlcore: wlcore@0 { |
| compatible = "ti,wl1271"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wlan_pins>; |
| reg = <0>; |
| spi-max-frequency = <48000000>; |
| clock-xtal; |
| ref-clock-frequency = <38400000>; |
| interrupts-extended = <&gpio2 10 IRQ_TYPE_LEVEL_HIGH>; /* gpio 42 */ |
| vwlan-supply = <&vwlan_fixed>; |
| }; |
| }; |
| |
| &modem { |
| compatible = "nokia,n950-modem"; |
| }; |
| |
| &twl { |
| twl_audio: audio { |
| compatible = "ti,twl4030-audio"; |
| ti,enable-vibra = <1>; |
| }; |
| }; |
| |
| &twl_keypad { |
| linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_BACKSLASH) |
| MATRIX_KEY(0x01, 0x00, KEY_LEFTSHIFT) |
| MATRIX_KEY(0x02, 0x00, KEY_COMPOSE) |
| MATRIX_KEY(0x03, 0x00, KEY_LEFTMETA) |
| MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) |
| MATRIX_KEY(0x05, 0x00, KEY_BACKSPACE) |
| MATRIX_KEY(0x06, 0x00, KEY_VOLUMEDOWN) |
| MATRIX_KEY(0x07, 0x00, KEY_VOLUMEUP) |
| |
| MATRIX_KEY(0x03, 0x01, KEY_Z) |
| MATRIX_KEY(0x04, 0x01, KEY_A) |
| MATRIX_KEY(0x05, 0x01, KEY_Q) |
| MATRIX_KEY(0x06, 0x01, KEY_W) |
| MATRIX_KEY(0x07, 0x01, KEY_E) |
| |
| MATRIX_KEY(0x03, 0x02, KEY_X) |
| MATRIX_KEY(0x04, 0x02, KEY_S) |
| MATRIX_KEY(0x05, 0x02, KEY_D) |
| MATRIX_KEY(0x06, 0x02, KEY_C) |
| MATRIX_KEY(0x07, 0x02, KEY_V) |
| |
| MATRIX_KEY(0x03, 0x03, KEY_O) |
| MATRIX_KEY(0x04, 0x03, KEY_I) |
| MATRIX_KEY(0x05, 0x03, KEY_U) |
| MATRIX_KEY(0x06, 0x03, KEY_L) |
| MATRIX_KEY(0x07, 0x03, KEY_APOSTROPHE) |
| |
| MATRIX_KEY(0x03, 0x04, KEY_Y) |
| MATRIX_KEY(0x04, 0x04, KEY_K) |
| MATRIX_KEY(0x05, 0x04, KEY_J) |
| MATRIX_KEY(0x06, 0x04, KEY_H) |
| MATRIX_KEY(0x07, 0x04, KEY_G) |
| |
| MATRIX_KEY(0x03, 0x05, KEY_B) |
| MATRIX_KEY(0x04, 0x05, KEY_COMMA) |
| MATRIX_KEY(0x05, 0x05, KEY_M) |
| MATRIX_KEY(0x06, 0x05, KEY_N) |
| MATRIX_KEY(0x07, 0x05, KEY_DOT) |
| |
| MATRIX_KEY(0x00, 0x06, KEY_SPACE) |
| MATRIX_KEY(0x03, 0x06, KEY_T) |
| MATRIX_KEY(0x04, 0x06, KEY_UP) |
| MATRIX_KEY(0x05, 0x06, KEY_LEFT) |
| MATRIX_KEY(0x06, 0x06, KEY_RIGHT) |
| MATRIX_KEY(0x07, 0x06, KEY_DOWN) |
| |
| MATRIX_KEY(0x03, 0x07, KEY_P) |
| MATRIX_KEY(0x04, 0x07, KEY_ENTER) |
| MATRIX_KEY(0x05, 0x07, KEY_SLASH) |
| MATRIX_KEY(0x06, 0x07, KEY_F) |
| MATRIX_KEY(0x07, 0x07, KEY_R) |
| >; |
| }; |
| |
| &lis302 { |
| st,axis-x = <(-2)>; /* LIS3_INV_DEV_Y */ |
| st,axis-y = <(-1)>; /* LIS3_INV_DEV_X */ |
| st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */ |
| |
| st,min-limit-x = <(-32)>; |
| st,min-limit-y = <3>; |
| st,min-limit-z = <3>; |
| |
| st,max-limit-x = <(-3)>; |
| st,max-limit-y = <32>; |
| st,max-limit-z = <32>; |
| }; |
| |
| &dss { |
| status = "okay"; |
| |
| vdda_video-supply = <&vdac>; |
| }; |
| |
| &dsi { |
| status = "okay"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dsi_pins>; |
| |
| vdd-supply = <&vpll2>; |
| |
| port { |
| dsi_out_ep: endpoint { |
| remote-endpoint = <&lcd0_in>; |
| lanes = <2 3 0 1 4 5>; |
| }; |
| }; |
| |
| lcd0: panel@0 { |
| compatible = "nokia,himalaya", "panel-dsi-cm"; |
| reg = <0>; |
| label = "lcd0"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&display_pins>; |
| |
| vpnl-supply = <&vmmc2>; |
| vddi-supply = <&vio>; |
| |
| reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ |
| te-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; /* 62 */ |
| |
| width-mm = <49>; /* 48.960 mm */ |
| height-mm = <88>; /* 88.128 mm */ |
| |
| /* TODO: |
| * - panel is upside-down |
| * - top + bottom 5px are not visible |
| */ |
| panel-timing { |
| clock-frequency = <0>; /* Calculated by dsi */ |
| |
| hback-porch = <2>; |
| hactive = <480>; |
| hfront-porch = <0>; |
| hsync-len = <2>; |
| |
| vback-porch = <1>; |
| vactive = <864>; |
| vfront-porch = <0>; |
| vsync-len = <1>; |
| |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <1>; |
| }; |
| |
| port { |
| lcd0_in: endpoint { |
| remote-endpoint = <&dsi_out_ep>; |
| }; |
| }; |
| }; |
| }; |
