blob: 7bfbfd11fb55fd1a2bf012d61defe5ff7540b079 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "rk3229.dtsi"
/ {
model = "Mecer Xtreme Mini S6";
compatible = "mecer,xms6", "rockchip,rk3229";
aliases {
mmc0 = &sdmmc;
mmc1 = &sdio;
mmc2 = &emmc;
};
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
dc_12v: dc-12v-regulator {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
ext_gmac: ext_gmac {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "ext_gmac";
#clock-cells = <0>;
};
power-led {
compatible = "gpio-leds";
blue_led: led-0 {
gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
<&gpio2 29 GPIO_ACTIVE_LOW>;
};
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc_sys>;
};
vcc_phy: vcc-phy-regulator {
compatible = "regulator-fixed";
enable-active-high;
regulator-name = "vcc_phy";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vccio_1v8>;
};
vcc_sys: vcc-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
vccio_1v8: vccio-1v8-regulator {
compatible = "regulator-fixed";
regulator-name = "vccio_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
vin-supply = <&vcc_sys>;
};
vccio_3v3: vccio-3v3-regulator {
compatible = "regulator-fixed";
regulator-name = "vccio_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
vin-supply = <&vcc_sys>;
};
vdd_arm: vdd-arm-regulator {
compatible = "pwm-regulator";
pwms = <&pwm1 0 25000 1>;
pwm-supply = <&vcc_sys>;
regulator-name = "vdd_arm";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
vdd_log: vdd-log-regulator {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 1>;
pwm-supply = <&vcc_sys>;
regulator-name = "vdd_log";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
};
&cpu0 {
cpu-supply = <&vdd_arm>;
};
&cpu1 {
cpu-supply = <&vdd_arm>;
};
&cpu2 {
cpu-supply = <&vdd_arm>;
};
&cpu3 {
cpu-supply = <&vdd_arm>;
};
&emmc {
cap-mmc-highspeed;
non-removable;
status = "okay";
};
&gmac {
assigned-clocks = <&cru SCLK_MAC_SRC>;
assigned-clock-rates = <50000000>;
clock_in_out = "output";
phy-handle = <&phy>;
phy-mode = "rmii";
phy-supply = <&vcc_phy>;
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
phy: ethernet-phy@0 {
compatible = "ethernet-phy-id1234.d400",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
clocks = <&cru SCLK_MAC_PHY>;
phy-is-integrated;
resets = <&cru SRST_MACPHY>;
};
};
};
&gpu {
mali-supply = <&vdd_log>;
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_phy {
status = "okay";
};
&iep_mmu {
status = "okay";
};
&io_domains {
status = "okay";
vccio1-supply = <&vccio_3v3>;
vccio2-supply = <&vccio_1v8>;
vccio4-supply = <&vccio_3v3>;
};
&pinctrl {
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm1 {
status = "okay";
};
&pwm2 {
status = "okay";
};
&sdio {
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
vqmmc-supply = <&vccio_1v8>;
status = "okay";
};
&sdmmc {
cap-mmc-highspeed;
disable-wp;
status = "okay";
};
&tsadc {
rockchip,hw-tshut-mode = <0>;
status = "okay";
};
&u2phy0 {
status = "okay";
u2phy0_host: host-port {
phy-supply = <&vcc_host>;
status = "okay";
};
u2phy0_otg: otg-port {
phy-supply = <&vcc_host>;
status = "okay";
};
};
&u2phy1 {
status = "okay";
u2phy1_host: host-port {
phy-supply = <&vcc_host>;
status = "okay";
};
u2phy1_otg: otg-port {
phy-supply = <&vcc_host>;
status = "okay";
};
};
&uart2 {
pinctrl-0 = <&uart21_xfer>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb_host2_ehci {
status = "okay";
};
&usb_host2_ohci {
status = "okay";
};
&usb_otg {
status = "okay";
};
&vop {
status = "okay";
};
&vop_mmu {
status = "okay";
};