blob: 7a2c7f9c26609d3511372d7267c7876f7e6a9e73 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2019 Linaro Ltd.
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
*/
/dts-v1/;
#include "bm1880.dtsi"
/*
* GPIO name legend: proper name = the GPIO line is used as GPIO
* NC = not connected (pin out but not routed from the chip to
* anything the board)
* "[PER]" = pin is muxed for [peripheral] (not GPIO)
* LSEC = Low Speed External Connector
* HSEC = High Speed External Connector
*
* Line names are taken from the schematic "sophon-edge-schematics"
* version, 1.0210.
*
* For the lines routed to the external connectors the
* lines are named after the 96Boards CE Specification 1.0,
* Appendix "Expansion Connector Signal Description".
*
* When the 96Board naming of a line and the schematic name of
* the same line are in conflict, the 96Board specification
* takes precedence. This is only for the informational
* lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
* are the only ones actually used for GPIO.
*/
/ {
compatible = "bitmain,sophon-edge", "bitmain,bm1880";
model = "Sophon Edge";
aliases {
serial0 = &uart0;
serial1 = &uart2;
serial2 = &uart1;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB
};
soc {
gpio0: gpio@50027000 {
porta: gpio-controller@0 {
gpio-line-names =
"GPIO-A", /* GPIO0, LSEC pin 23 */
"GPIO-C", /* GPIO1, LSEC pin 25 */
"[GPIO2_PHY0_RST]", /* GPIO2 */
"GPIO-E", /* GPIO3, LSEC pin 27 */
"[USB_DET]", /* GPIO4 */
"[EN_P5V]", /* GPIO5 */
"[VDDIO_MS1_SEL]", /* GPIO6 */
"GPIO-G", /* GPIO7, LSEC pin 29 */
"[BM_TUSB_RST_L]", /* GPIO8 */
"[EN_P5V_USBHUB]", /* GPIO9 */
"NC",
"LED_WIFI", /* GPIO11 */
"LED_BT", /* GPIO12 */
"[BM_BLM8221_EN_L]", /* GPIO13 */
"NC", /* GPIO14 */
"NC", /* GPIO15 */
"NC", /* GPIO16 */
"NC", /* GPIO17 */
"NC", /* GPIO18 */
"NC", /* GPIO19 */
"NC", /* GPIO20 */
"NC", /* GPIO21 */
"NC", /* GPIO22 */
"NC", /* GPIO23 */
"NC", /* GPIO24 */
"NC", /* GPIO25 */
"NC", /* GPIO26 */
"NC", /* GPIO27 */
"NC", /* GPIO28 */
"NC", /* GPIO29 */
"NC", /* GPIO30 */
"NC"; /* GPIO31 */
};
};
gpio1: gpio@50027400 {
portb: gpio-controller@0 {
gpio-line-names =
"NC", /* GPIO32 */
"NC", /* GPIO33 */
"[I2C0_SDA]", /* GPIO34, LSEC pin 17 */
"[I2C0_SCL]", /* GPIO35, LSEC pin 15 */
"[JTAG0_TDO]", /* GPIO36 */
"[JTAG0_TCK]", /* GPIO37 */
"[JTAG0_TDI]", /* GPIO38 */
"[JTAG0_TMS]", /* GPIO39 */
"[JTAG0_TRST_X]", /* GPIO40 */
"[JTAG1_TDO]", /* GPIO41 */
"[JTAG1_TCK]", /* GPIO42 */
"[JTAG1_TDI]", /* GPIO43 */
"[CPU_TX]", /* GPIO44 */
"[CPU_RX]", /* GPIO45 */
"[UART1_TXD]", /* GPIO46 */
"[UART1_RXD]", /* GPIO47 */
"[UART0_TXD]", /* GPIO48 */
"[UART0_RXD]", /* GPIO49 */
"GPIO-I", /* GPIO50, LSEC pin 31 */
"GPIO-K", /* GPIO51, LSEC pin 33 */
"USER_LED2", /* GPIO52 */
"USER_LED1", /* GPIO53 */
"[UART0_RTS]", /* GPIO54 */
"[UART0_CTS]", /* GPIO55 */
"USER_LED4", /* GPIO56, JTAG1_TRST_X */
"USER_LED3", /* GPIO57, JTAG1_TMS */
"[I2S0_SCLK]", /* GPIO58 */
"[I2S0_FS]", /* GPIO59 */
"[I2S0_SDI]", /* GPIO60 */
"[I2S0_SDO]", /* GPIO61 */
"GPIO-B", /* GPIO62, LSEC pin 24 */
"GPIO-F"; /* GPIO63, I2S1_SCLK, LSEC pin 28 */
};
};
gpio2: gpio@50027800 {
portc: gpio-controller@0 {
gpio-line-names =
"GPIO-D", /* GPIO64, I2S1_FS, LSEC pin 26 */
"GPIO-J", /* GPIO65, I2S1_SDI, LSEC pin 32 */
"GPIO-H", /* GPIO66, I2S1_SDO, LSEC pin 30 */
"GPIO-L", /* GPIO67, LSEC pin 34 */
"[SPI0_CS]", /* GPIO68, SPI1_CS, LSEC pin 12 */
"[SPI0_DIN]", /* GPIO69, SPI1_SDI, LSEC pin 10 */
"[SPI0_DOUT]", /* GPIO70, SPI1_SDO, LSEC pin 14 */
"[SPI0_SCLK]"; /* GPIO71, SPI1_SCK, LSEC pin 8 */
};
};
};
};
&pinctrl {
pinctrl_uart0_default: pinctrl-uart0-default {
pinmux {
groups = "uart0_grp";
function = "uart0";
};
};
pinctrl_uart1_default: pinctrl-uart1-default {
pinmux {
groups = "uart1_grp";
function = "uart1";
};
};
pinctrl_uart2_default: pinctrl-uart2-default {
pinmux {
groups = "uart2_grp";
function = "uart2";
};
};
};
&uart0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0_default>;
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_default>;
};
&uart2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_default>;
};