| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org> |
| */ |
| |
| #include <dt-bindings/clock/qcom,gcc-sm6125.h> |
| #include <dt-bindings/clock/qcom,rpmcc.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| chosen { }; |
| |
| clocks { |
| xo_board: xo-board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <19200000>; |
| clock-output-names = "xo_board"; |
| }; |
| |
| sleep_clk: sleep-clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32000>; |
| clock-output-names = "sleep_clk"; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo260"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1024>; |
| next-level-cache = <&L2_0>; |
| L2_0: l2-cache { |
| compatible = "cache"; |
| }; |
| }; |
| |
| CPU1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo260"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1024>; |
| next-level-cache = <&L2_0>; |
| }; |
| |
| CPU2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo260"; |
| reg = <0x0 0x2>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1024>; |
| next-level-cache = <&L2_0>; |
| }; |
| |
| CPU3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo260"; |
| reg = <0x0 0x3>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1024>; |
| next-level-cache = <&L2_0>; |
| }; |
| |
| CPU4: cpu@100 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo260"; |
| reg = <0x0 0x100>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1638>; |
| next-level-cache = <&L2_1>; |
| L2_1: l2-cache { |
| compatible = "cache"; |
| }; |
| }; |
| |
| CPU5: cpu@101 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo260"; |
| reg = <0x0 0x101>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1638>; |
| next-level-cache = <&L2_1>; |
| }; |
| |
| CPU6: cpu@102 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo260"; |
| reg = <0x0 0x102>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1638>; |
| next-level-cache = <&L2_1>; |
| }; |
| |
| CPU7: cpu@103 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo260"; |
| reg = <0x0 0x103>; |
| enable-method = "psci"; |
| capacity-dmips-mhz = <1638>; |
| next-level-cache = <&L2_1>; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| |
| cluster1 { |
| core0 { |
| cpu = <&CPU4>; |
| }; |
| |
| core1 { |
| cpu = <&CPU5>; |
| }; |
| |
| core2 { |
| cpu = <&CPU6>; |
| }; |
| |
| core3 { |
| cpu = <&CPU7>; |
| }; |
| }; |
| }; |
| }; |
| |
| firmware { |
| scm: scm { |
| compatible = "qcom,scm-sm6125", "qcom,scm"; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| memory@40000000 { |
| /* We expect the bootloader to fill in the size */ |
| reg = <0x0 0x40000000 0x0 0x0>; |
| device_type = "memory"; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| reserved_memory: reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| hyp_mem: memory@45700000 { |
| reg = <0x0 0x45700000 0x0 0x600000>; |
| no-map; |
| }; |
| |
| xbl_aop_mem: memory@45e00000 { |
| reg = <0x0 0x45e00000 0x0 0x140000>; |
| no-map; |
| }; |
| |
| sec_apps_mem: memory@45fff000 { |
| reg = <0x0 0x45fff000 0x0 0x1000>; |
| no-map; |
| }; |
| |
| smem_mem: memory@46000000 { |
| reg = <0x0 0x46000000 0x0 0x200000>; |
| no-map; |
| }; |
| |
| reserved_mem1: memory@46200000 { |
| reg = <0x0 0x46200000 0x0 0x2d00000>; |
| no-map; |
| }; |
| |
| camera_mem: memory@4ab00000 { |
| reg = <0x0 0x4ab00000 0x0 0x500000>; |
| no-map; |
| }; |
| |
| modem_mem: memory@4b000000 { |
| reg = <0x0 0x4b000000 0x0 0x7e00000>; |
| no-map; |
| }; |
| |
| venus_mem: memory@52e00000 { |
| reg = <0x0 0x52e00000 0x0 0x500000>; |
| no-map; |
| }; |
| |
| wlan_msa_mem: memory@53300000 { |
| reg = <0x0 0x53300000 0x0 0x200000>; |
| no-map; |
| }; |
| |
| cdsp_mem: memory@53500000 { |
| reg = <0x0 0x53500000 0x0 0x1e00000>; |
| no-map; |
| }; |
| |
| adsp_pil_mem: memory@55300000 { |
| reg = <0x0 0x55300000 0x0 0x1e00000>; |
| no-map; |
| }; |
| |
| ipa_fw_mem: memory@57100000 { |
| reg = <0x0 0x57100000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| ipa_gsi_mem: memory@57110000 { |
| reg = <0x0 0x57110000 0x0 0x5000>; |
| no-map; |
| }; |
| |
| gpu_mem: memory@57115000 { |
| reg = <0x0 0x57115000 0x0 0x2000>; |
| no-map; |
| }; |
| |
| cont_splash_mem: memory@5c000000 { |
| reg = <0x0 0x5c000000 0x0 0x00f00000>; |
| no-map; |
| }; |
| |
| dfps_data_mem: memory@5cf00000 { |
| reg = <0x0 0x5cf00000 0x0 0x0100000>; |
| no-map; |
| }; |
| |
| cdsp_sec_mem: memory@5f800000 { |
| reg = <0x0 0x5f800000 0x0 0x1e00000>; |
| no-map; |
| }; |
| |
| qseecom_mem: memory@5e400000 { |
| reg = <0x0 0x5e400000 0x0 0x1400000>; |
| no-map; |
| }; |
| |
| sdsp_mem: memory@f3000000 { |
| reg = <0x0 0xf3000000 0x0 0x400000>; |
| no-map; |
| }; |
| |
| adsp_mem: memory@f3400000 { |
| reg = <0x0 0xf3400000 0x0 0x800000>; |
| no-map; |
| }; |
| |
| qseecom_ta_mem: memory@13fc00000 { |
| reg = <0x1 0x3fc00000 0x0 0x400000>; |
| no-map; |
| }; |
| }; |
| |
| rpm-glink { |
| compatible = "qcom,glink-rpm"; |
| |
| interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; |
| qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| mboxes = <&apcs_glb 0>; |
| |
| rpm_requests: rpm-requests { |
| compatible = "qcom,rpm-sm6125"; |
| qcom,glink-channels = "rpm_requests"; |
| |
| rpmcc: clock-controller { |
| compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc"; |
| #clock-cells = <1>; |
| }; |
| }; |
| }; |
| |
| smem: smem { |
| compatible = "qcom,smem"; |
| memory-region = <&smem_mem>; |
| hwlocks = <&tcsr_mutex 3>; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00 0x00 0x00 0xffffffff>; |
| compatible = "simple-bus"; |
| |
| tcsr_mutex: hwlock@340000 { |
| compatible = "qcom,tcsr-mutex"; |
| reg = <0x00340000 0x20000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| tlmm: pinctrl@500000 { |
| compatible = "qcom,sm6125-tlmm"; |
| reg = <0x00500000 0x400000>, |
| <0x00900000 0x400000>, |
| <0x00d00000 0x400000>; |
| reg-names = "west", "south", "east"; |
| interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| gpio-ranges = <&tlmm 0 0 134>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| sdc2_state_off: sdc2-off { |
| clk { |
| pins = "sdc2_clk"; |
| bias-disable; |
| drive-strength = <2>; |
| }; |
| |
| cmd { |
| pins = "sdc2_cmd"; |
| bias-pull-up; |
| drive-strength = <2>; |
| }; |
| |
| data { |
| pins = "sdc2_data"; |
| bias-pull-up; |
| drive-strength = <2>; |
| }; |
| }; |
| }; |
| |
| gcc: clock-controller@1400000 { |
| compatible = "qcom,gcc-sm6125"; |
| reg = <0x01400000 0x1f0000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| clock-names = "bi_tcxo", "sleep_clk"; |
| clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; |
| }; |
| |
| hsusb_phy1: phy@1613000 { |
| compatible = "qcom,msm8996-qusb2-phy"; |
| reg = <0x01613000 0x180>; |
| #phy-cells = <0>; |
| |
| clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| <&gcc GCC_AHB2PHY_USB_CLK>; |
| clock-names = "ref", "cfg_ahb"; |
| |
| resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; |
| status = "disabled"; |
| }; |
| |
| rpm_msg_ram: memory@45f0000 { |
| compatible = "qcom,rpm-msg-ram"; |
| reg = <0x045f0000 0x7000>; |
| }; |
| |
| sdhc_1: sdhci@4744000 { |
| compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; |
| reg = <0x04744000 0x1000>, <0x04745000 0x1000>; |
| reg-names = "hc", "core"; |
| |
| interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| <&gcc GCC_SDCC1_APPS_CLK>, |
| <&xo_board>; |
| clock-names = "iface", "core", "xo"; |
| bus-width = <8>; |
| non-removable; |
| status = "disabled"; |
| }; |
| |
| sdhc_2: sdhci@4784000 { |
| compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5"; |
| reg = <0x04784000 0x1000>; |
| reg-names = "hc"; |
| |
| interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| <&gcc GCC_SDCC2_APPS_CLK>, |
| <&xo_board>; |
| clock-names = "iface", "core", "xo"; |
| |
| pinctrl-0 = <&sdc2_state_on>; |
| pinctrl-1 = <&sdc2_state_off>; |
| pinctrl-names = "default", "sleep"; |
| |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| usb3: usb@4ef8800 { |
| compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; |
| reg = <0x04ef8800 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, |
| <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB3_PRIM_CLKREF_CLK>, |
| <&gcc GCC_USB30_PRIM_SLEEP_CLK>, |
| <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; |
| |
| assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <66666667>; |
| |
| power-domains = <&gcc USB30_PRIM_GDSC>; |
| qcom,select-utmi-as-pipe-clk; |
| status = "disabled"; |
| |
| usb3_dwc3: usb@4e00000 { |
| compatible = "snps,dwc3"; |
| reg = <0x04e00000 0xcd00>; |
| interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&hsusb_phy1>; |
| phy-names = "usb2-phy"; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_enblslpm_quirk; |
| maximum-speed = "high-speed"; |
| dr_mode = "peripheral"; |
| }; |
| }; |
| |
| spmi_bus: spmi@1c40000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0x01c40000 0x1100>, |
| <0x01e00000 0x2000000>, |
| <0x03e00000 0x100000>, |
| <0x03f00000 0xa0000>, |
| <0x01c0a000 0x26000>; |
| reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| interrupt-names = "periph_irq"; |
| interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| cell-index = <0>; |
| }; |
| |
| apcs_glb: mailbox@f111000 { |
| compatible = "qcom,sm6125-apcs-hmss-global"; |
| reg = <0x0f111000 0x1000>; |
| |
| #mbox-cells = <1>; |
| }; |
| |
| timer@f120000 { |
| compatible = "arm,armv7-timer-mem"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| reg = <0x0f120000 0x1000>; |
| clock-frequency = <19200000>; |
| |
| frame@0f121000 { |
| frame-number = <0>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0f121000 0x1000>, |
| <0x0f122000 0x1000>; |
| }; |
| |
| frame@0f123000 { |
| frame-number = <1>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0f123000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@0f124000 { |
| frame-number = <2>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0f124000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f125000 { |
| frame-number = <3>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0f125000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f126000 { |
| frame-number = <4>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0f126000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f127000 { |
| frame-number = <5>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0f127000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f128000 { |
| frame-number = <6>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x0f128000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| intc: interrupt-controller@f200000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x0f200000 0x20000>, |
| <0x0f300000 0x100000>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 1 0xf08 |
| GIC_PPI 2 0xf08 |
| GIC_PPI 3 0xf08 |
| GIC_PPI 0 0xf08>; |
| clock-frequency = <19200000>; |
| }; |
| }; |
