| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2014 MediaTek Inc. |
| * Author: James Liao <jamesjj.liao@mediatek.com> |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/container_of.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/slab.h> |
| |
| #include "clk-pll.h" |
| |
| #define MHZ (1000 * 1000) |
| |
| #define REG_CON0 0 |
| #define REG_CON1 4 |
| |
| #define CON0_BASE_EN BIT(0) |
| #define CON0_PWR_ON BIT(0) |
| #define CON0_ISO_EN BIT(1) |
| #define PCW_CHG_MASK BIT(31) |
| |
| #define AUDPLL_TUNER_EN BIT(31) |
| |
| /* default 7 bits integer, can be overridden with pcwibits. */ |
| #define INTEGER_BITS 7 |
| |
| int mtk_pll_is_prepared(struct clk_hw *hw) |
| { |
| struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); |
| |
| return (readl(pll->en_addr) & BIT(pll->data->pll_en_bit)) != 0; |
| } |
| |
| static unsigned long __mtk_pll_recalc_rate(struct mtk_clk_pll *pll, u32 fin, |
| u32 pcw, int postdiv) |
| { |
| int pcwbits = pll->data->pcwbits; |
| int pcwfbits = 0; |
| int ibits; |
| u64 vco; |
| u8 c = 0; |
| |
| /* The fractional part of the PLL divider. */ |
| ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS; |
| if (pcwbits > ibits) |
| pcwfbits = pcwbits - ibits; |
| |
| vco = (u64)fin * pcw; |
| |
| if (pcwfbits && (vco & GENMASK(pcwfbits - 1, 0))) |
| c = 1; |
| |
| vco >>= pcwfbits; |
| |
| if (c) |
| vco++; |
| |
| return ((unsigned long)vco + postdiv - 1) / postdiv; |
| } |
| |
| static void __mtk_pll_tuner_enable(struct mtk_clk_pll *pll) |
| { |
| u32 r; |
| |
| if (pll->tuner_en_addr) { |
| r = readl(pll->tuner_en_addr) | BIT(pll->data->tuner_en_bit); |
| writel(r, pll->tuner_en_addr); |
| } else if (pll->tuner_addr) { |
| r = readl(pll->tuner_addr) | AUDPLL_TUNER_EN; |
| writel(r, pll->tuner_addr); |
| } |
| } |
| |
| static void __mtk_pll_tuner_disable(struct mtk_clk_pll *pll) |
| { |
| u32 r; |
| |
| if (pll->tuner_en_addr) { |
| r = readl(pll->tuner_en_addr) & ~BIT(pll->data->tuner_en_bit); |
| writel(r, pll->tuner_en_addr); |
| } else if (pll->tuner_addr) { |
| r = readl(pll->tuner_addr) & ~AUDPLL_TUNER_EN; |
| writel(r, pll->tuner_addr); |
| } |
| } |
| |
| static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw, |
| int postdiv) |
| { |
| u32 chg, val; |
| |
| /* disable tuner */ |
| __mtk_pll_tuner_disable(pll); |
| |
| /* set postdiv */ |
| val = readl(pll->pd_addr); |
| val &= ~(POSTDIV_MASK << pll->data->pd_shift); |
| val |= (ffs(postdiv) - 1) << pll->data->pd_shift; |
| |
| /* postdiv and pcw need to set at the same time if on same register */ |
| if (pll->pd_addr != pll->pcw_addr) { |
| writel(val, pll->pd_addr); |
| val = readl(pll->pcw_addr); |
| } |
| |
| /* set pcw */ |
| val &= ~GENMASK(pll->data->pcw_shift + pll->data->pcwbits - 1, |
| pll->data->pcw_shift); |
| val |= pcw << pll->data->pcw_shift; |
| writel(val, pll->pcw_addr); |
| chg = readl(pll->pcw_chg_addr) | PCW_CHG_MASK; |
| writel(chg, pll->pcw_chg_addr); |
| if (pll->tuner_addr) |
| writel(val + 1, pll->tuner_addr); |
| |
| /* restore tuner_en */ |
| __mtk_pll_tuner_enable(pll); |
| |
| udelay(20); |
| } |
| |
| /* |
| * mtk_pll_calc_values - calculate good values for a given input frequency. |
| * @pll: The pll |
| * @pcw: The pcw value (output) |
| * @postdiv: The post divider (output) |
| * @freq: The desired target frequency |
| * @fin: The input frequency |
| * |
| */ |
| void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv, |
| u32 freq, u32 fin) |
| { |
| unsigned long fmin = pll->data->fmin ? pll->data->fmin : (1000 * MHZ); |
| const struct mtk_pll_div_table *div_table = pll->data->div_table; |
| u64 _pcw; |
| int ibits; |
| u32 val; |
| |
| if (freq > pll->data->fmax) |
| freq = pll->data->fmax; |
| |
| if (div_table) { |
| if (freq > div_table[0].freq) |
| freq = div_table[0].freq; |
| |
| for (val = 0; div_table[val + 1].freq != 0; val++) { |
| if (freq > div_table[val + 1].freq) |
| break; |
| } |
| *postdiv = 1 << val; |
| } else { |
| for (val = 0; val < 5; val++) { |
| *postdiv = 1 << val; |
| if ((u64)freq * *postdiv >= fmin) |
| break; |
| } |
| } |
| |
| /* _pcw = freq * postdiv / fin * 2^pcwfbits */ |
| ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS; |
| _pcw = ((u64)freq << val) << (pll->data->pcwbits - ibits); |
| do_div(_pcw, fin); |
| |
| *pcw = (u32)_pcw; |
| } |
| |
| int mtk_pll_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); |
| u32 pcw = 0; |
| u32 postdiv; |
| |
| mtk_pll_calc_values(pll, &pcw, &postdiv, rate, parent_rate); |
| mtk_pll_set_rate_regs(pll, pcw, postdiv); |
| |
| return 0; |
| } |
| |
| unsigned long mtk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) |
| { |
| struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); |
| u32 postdiv; |
| u32 pcw; |
| |
| postdiv = (readl(pll->pd_addr) >> pll->data->pd_shift) & POSTDIV_MASK; |
| postdiv = 1 << postdiv; |
| |
| pcw = readl(pll->pcw_addr) >> pll->data->pcw_shift; |
| pcw &= GENMASK(pll->data->pcwbits - 1, 0); |
| |
| return __mtk_pll_recalc_rate(pll, parent_rate, pcw, postdiv); |
| } |
| |
| long mtk_pll_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); |
| u32 pcw = 0; |
| int postdiv; |
| |
| mtk_pll_calc_values(pll, &pcw, &postdiv, rate, *prate); |
| |
| return __mtk_pll_recalc_rate(pll, *prate, pcw, postdiv); |
| } |
| |
| int mtk_pll_prepare(struct clk_hw *hw) |
| { |
| struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); |
| u32 r; |
| |
| r = readl(pll->pwr_addr) | CON0_PWR_ON; |
| writel(r, pll->pwr_addr); |
| udelay(1); |
| |
| r = readl(pll->pwr_addr) & ~CON0_ISO_EN; |
| writel(r, pll->pwr_addr); |
| udelay(1); |
| |
| r = readl(pll->en_addr) | BIT(pll->data->pll_en_bit); |
| writel(r, pll->en_addr); |
| |
| if (pll->data->en_mask) { |
| r = readl(pll->base_addr + REG_CON0) | pll->data->en_mask; |
| writel(r, pll->base_addr + REG_CON0); |
| } |
| |
| __mtk_pll_tuner_enable(pll); |
| |
| udelay(20); |
| |
| if (pll->data->flags & HAVE_RST_BAR) { |
| r = readl(pll->base_addr + REG_CON0); |
| r |= pll->data->rst_bar_mask; |
| writel(r, pll->base_addr + REG_CON0); |
| } |
| |
| return 0; |
| } |
| |
| void mtk_pll_unprepare(struct clk_hw *hw) |
| { |
| struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); |
| u32 r; |
| |
| if (pll->data->flags & HAVE_RST_BAR) { |
| r = readl(pll->base_addr + REG_CON0); |
| r &= ~pll->data->rst_bar_mask; |
| writel(r, pll->base_addr + REG_CON0); |
| } |
| |
| __mtk_pll_tuner_disable(pll); |
| |
| if (pll->data->en_mask) { |
| r = readl(pll->base_addr + REG_CON0) & ~pll->data->en_mask; |
| writel(r, pll->base_addr + REG_CON0); |
| } |
| |
| r = readl(pll->en_addr) & ~BIT(pll->data->pll_en_bit); |
| writel(r, pll->en_addr); |
| |
| r = readl(pll->pwr_addr) | CON0_ISO_EN; |
| writel(r, pll->pwr_addr); |
| |
| r = readl(pll->pwr_addr) & ~CON0_PWR_ON; |
| writel(r, pll->pwr_addr); |
| } |
| |
| const struct clk_ops mtk_pll_ops = { |
| .is_prepared = mtk_pll_is_prepared, |
| .prepare = mtk_pll_prepare, |
| .unprepare = mtk_pll_unprepare, |
| .recalc_rate = mtk_pll_recalc_rate, |
| .round_rate = mtk_pll_round_rate, |
| .set_rate = mtk_pll_set_rate, |
| }; |
| |
| struct clk_hw *mtk_clk_register_pll_ops(struct mtk_clk_pll *pll, |
| const struct mtk_pll_data *data, |
| void __iomem *base, |
| const struct clk_ops *pll_ops) |
| { |
| struct clk_init_data init = {}; |
| int ret; |
| const char *parent_name = "clk26m"; |
| |
| pll->base_addr = base + data->reg; |
| pll->pwr_addr = base + data->pwr_reg; |
| pll->pd_addr = base + data->pd_reg; |
| pll->pcw_addr = base + data->pcw_reg; |
| if (data->pcw_chg_reg) |
| pll->pcw_chg_addr = base + data->pcw_chg_reg; |
| else |
| pll->pcw_chg_addr = pll->base_addr + REG_CON1; |
| if (data->tuner_reg) |
| pll->tuner_addr = base + data->tuner_reg; |
| if (data->tuner_en_reg || data->tuner_en_bit) |
| pll->tuner_en_addr = base + data->tuner_en_reg; |
| if (data->en_reg) |
| pll->en_addr = base + data->en_reg; |
| else |
| pll->en_addr = pll->base_addr + REG_CON0; |
| pll->hw.init = &init; |
| pll->data = data; |
| |
| init.name = data->name; |
| init.flags = (data->flags & PLL_AO) ? CLK_IS_CRITICAL : 0; |
| init.ops = pll_ops; |
| if (data->parent_name) |
| init.parent_names = &data->parent_name; |
| else |
| init.parent_names = &parent_name; |
| init.num_parents = 1; |
| |
| ret = clk_hw_register(NULL, &pll->hw); |
| |
| if (ret) |
| return ERR_PTR(ret); |
| |
| return &pll->hw; |
| } |
| |
| struct clk_hw *mtk_clk_register_pll(const struct mtk_pll_data *data, |
| void __iomem *base) |
| { |
| struct mtk_clk_pll *pll; |
| struct clk_hw *hw; |
| |
| pll = kzalloc(sizeof(*pll), GFP_KERNEL); |
| if (!pll) |
| return ERR_PTR(-ENOMEM); |
| |
| hw = mtk_clk_register_pll_ops(pll, data, base, &mtk_pll_ops); |
| if (IS_ERR(hw)) |
| kfree(pll); |
| |
| return hw; |
| } |
| |
| void mtk_clk_unregister_pll(struct clk_hw *hw) |
| { |
| struct mtk_clk_pll *pll; |
| |
| if (!hw) |
| return; |
| |
| pll = to_mtk_clk_pll(hw); |
| |
| clk_hw_unregister(hw); |
| kfree(pll); |
| } |
| |
| int mtk_clk_register_plls(struct device_node *node, |
| const struct mtk_pll_data *plls, int num_plls, |
| struct clk_hw_onecell_data *clk_data) |
| { |
| void __iomem *base; |
| int i; |
| struct clk_hw *hw; |
| |
| base = of_iomap(node, 0); |
| if (!base) { |
| pr_err("%s(): ioremap failed\n", __func__); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < num_plls; i++) { |
| const struct mtk_pll_data *pll = &plls[i]; |
| |
| if (!IS_ERR_OR_NULL(clk_data->hws[pll->id])) { |
| pr_warn("%pOF: Trying to register duplicate clock ID: %d\n", |
| node, pll->id); |
| continue; |
| } |
| |
| hw = mtk_clk_register_pll(pll, base); |
| |
| if (IS_ERR(hw)) { |
| pr_err("Failed to register clk %s: %pe\n", pll->name, |
| hw); |
| goto err; |
| } |
| |
| clk_data->hws[pll->id] = hw; |
| } |
| |
| return 0; |
| |
| err: |
| while (--i >= 0) { |
| const struct mtk_pll_data *pll = &plls[i]; |
| |
| mtk_clk_unregister_pll(clk_data->hws[pll->id]); |
| clk_data->hws[pll->id] = ERR_PTR(-ENOENT); |
| } |
| |
| iounmap(base); |
| |
| return PTR_ERR(hw); |
| } |
| EXPORT_SYMBOL_GPL(mtk_clk_register_plls); |
| |
| __iomem void *mtk_clk_pll_get_base(struct clk_hw *hw, |
| const struct mtk_pll_data *data) |
| { |
| struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); |
| |
| return pll->base_addr - data->reg; |
| } |
| |
| void mtk_clk_unregister_plls(const struct mtk_pll_data *plls, int num_plls, |
| struct clk_hw_onecell_data *clk_data) |
| { |
| __iomem void *base = NULL; |
| int i; |
| |
| if (!clk_data) |
| return; |
| |
| for (i = num_plls; i > 0; i--) { |
| const struct mtk_pll_data *pll = &plls[i - 1]; |
| |
| if (IS_ERR_OR_NULL(clk_data->hws[pll->id])) |
| continue; |
| |
| /* |
| * This is quite ugly but unfortunately the clks don't have |
| * any device tied to them, so there's no place to store the |
| * pointer to the I/O region base address. We have to fetch |
| * it from one of the registered clks. |
| */ |
| base = mtk_clk_pll_get_base(clk_data->hws[pll->id], pll); |
| |
| mtk_clk_unregister_pll(clk_data->hws[pll->id]); |
| clk_data->hws[pll->id] = ERR_PTR(-ENOENT); |
| } |
| |
| iounmap(base); |
| } |
| EXPORT_SYMBOL_GPL(mtk_clk_unregister_plls); |
| |
| MODULE_LICENSE("GPL"); |