| /* |
| * Marvell Wireless LAN device driver: HW/FW Initialization |
| * |
| * Copyright (C) 2011-2014, Marvell International Ltd. |
| * |
| * This software file (the "File") is distributed by Marvell International |
| * Ltd. under the terms of the GNU General Public License Version 2, June 1991 |
| * (the "License"). You may use, redistribute and/or modify this File in |
| * accordance with the terms and conditions of the License, a copy of which |
| * is available by writing to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the |
| * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. |
| * |
| * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE |
| * ARE EXPRESSLY DISCLAIMED. The License provides additional details about |
| * this warranty disclaimer. |
| */ |
| |
| #include "decl.h" |
| #include "ioctl.h" |
| #include "util.h" |
| #include "fw.h" |
| #include "main.h" |
| #include "wmm.h" |
| #include "11n.h" |
| |
| /* |
| * This function adds a BSS priority table to the table list. |
| * |
| * The function allocates a new BSS priority table node and adds it to |
| * the end of BSS priority table list, kept in driver memory. |
| */ |
| static int mwifiex_add_bss_prio_tbl(struct mwifiex_private *priv) |
| { |
| struct mwifiex_adapter *adapter = priv->adapter; |
| struct mwifiex_bss_prio_node *bss_prio; |
| struct mwifiex_bss_prio_tbl *tbl = adapter->bss_prio_tbl; |
| |
| bss_prio = kzalloc(sizeof(struct mwifiex_bss_prio_node), GFP_KERNEL); |
| if (!bss_prio) |
| return -ENOMEM; |
| |
| bss_prio->priv = priv; |
| INIT_LIST_HEAD(&bss_prio->list); |
| |
| spin_lock_bh(&tbl[priv->bss_priority].bss_prio_lock); |
| list_add_tail(&bss_prio->list, &tbl[priv->bss_priority].bss_prio_head); |
| spin_unlock_bh(&tbl[priv->bss_priority].bss_prio_lock); |
| |
| return 0; |
| } |
| |
| static void wakeup_timer_fn(struct timer_list *t) |
| { |
| struct mwifiex_adapter *adapter = from_timer(adapter, t, wakeup_timer); |
| |
| mwifiex_dbg(adapter, ERROR, "Firmware wakeup failed\n"); |
| adapter->hw_status = MWIFIEX_HW_STATUS_RESET; |
| mwifiex_cancel_all_pending_cmd(adapter); |
| |
| if (adapter->if_ops.card_reset) |
| adapter->if_ops.card_reset(adapter); |
| } |
| |
| static void fw_dump_timer_fn(struct timer_list *t) |
| { |
| struct mwifiex_adapter *adapter = from_timer(adapter, t, devdump_timer); |
| |
| mwifiex_upload_device_dump(adapter); |
| } |
| |
| /* |
| * This function initializes the private structure and sets default |
| * values to the members. |
| * |
| * Additionally, it also initializes all the locks and sets up all the |
| * lists. |
| */ |
| int mwifiex_init_priv(struct mwifiex_private *priv) |
| { |
| u32 i; |
| |
| priv->media_connected = false; |
| eth_broadcast_addr(priv->curr_addr); |
| priv->port_open = false; |
| priv->usb_port = MWIFIEX_USB_EP_DATA; |
| priv->pkt_tx_ctrl = 0; |
| priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; |
| priv->data_rate = 0; /* Initially indicate the rate as auto */ |
| priv->is_data_rate_auto = true; |
| priv->bcn_avg_factor = DEFAULT_BCN_AVG_FACTOR; |
| priv->data_avg_factor = DEFAULT_DATA_AVG_FACTOR; |
| |
| priv->sec_info.wep_enabled = 0; |
| priv->sec_info.authentication_mode = NL80211_AUTHTYPE_OPEN_SYSTEM; |
| priv->sec_info.encryption_mode = 0; |
| for (i = 0; i < ARRAY_SIZE(priv->wep_key); i++) |
| memset(&priv->wep_key[i], 0, sizeof(struct mwifiex_wep_key)); |
| priv->wep_key_curr_index = 0; |
| priv->curr_pkt_filter = HostCmd_ACT_MAC_DYNAMIC_BW_ENABLE | |
| HostCmd_ACT_MAC_RX_ON | HostCmd_ACT_MAC_TX_ON | |
| HostCmd_ACT_MAC_ETHERNETII_ENABLE; |
| |
| priv->beacon_period = 100; /* beacon interval */ |
| priv->attempted_bss_desc = NULL; |
| memset(&priv->curr_bss_params, 0, sizeof(priv->curr_bss_params)); |
| priv->listen_interval = MWIFIEX_DEFAULT_LISTEN_INTERVAL; |
| |
| memset(&priv->prev_ssid, 0, sizeof(priv->prev_ssid)); |
| memset(&priv->prev_bssid, 0, sizeof(priv->prev_bssid)); |
| memset(&priv->assoc_rsp_buf, 0, sizeof(priv->assoc_rsp_buf)); |
| priv->assoc_rsp_size = 0; |
| priv->adhoc_channel = DEFAULT_AD_HOC_CHANNEL; |
| priv->atim_window = 0; |
| priv->adhoc_state = ADHOC_IDLE; |
| priv->tx_power_level = 0; |
| priv->max_tx_power_level = 0; |
| priv->min_tx_power_level = 0; |
| priv->tx_ant = 0; |
| priv->rx_ant = 0; |
| priv->tx_rate = 0; |
| priv->rxpd_htinfo = 0; |
| priv->rxpd_rate = 0; |
| priv->rate_bitmap = 0; |
| priv->data_rssi_last = 0; |
| priv->data_rssi_avg = 0; |
| priv->data_nf_avg = 0; |
| priv->data_nf_last = 0; |
| priv->bcn_rssi_last = 0; |
| priv->bcn_rssi_avg = 0; |
| priv->bcn_nf_avg = 0; |
| priv->bcn_nf_last = 0; |
| memset(&priv->wpa_ie, 0, sizeof(priv->wpa_ie)); |
| memset(&priv->aes_key, 0, sizeof(priv->aes_key)); |
| priv->wpa_ie_len = 0; |
| priv->wpa_is_gtk_set = false; |
| |
| memset(&priv->assoc_tlv_buf, 0, sizeof(priv->assoc_tlv_buf)); |
| priv->assoc_tlv_buf_len = 0; |
| memset(&priv->wps, 0, sizeof(priv->wps)); |
| memset(&priv->gen_ie_buf, 0, sizeof(priv->gen_ie_buf)); |
| priv->gen_ie_buf_len = 0; |
| memset(priv->vs_ie, 0, sizeof(priv->vs_ie)); |
| |
| priv->wmm_required = true; |
| priv->wmm_enabled = false; |
| priv->wmm_qosinfo = 0; |
| priv->curr_bcn_buf = NULL; |
| priv->curr_bcn_size = 0; |
| priv->wps_ie = NULL; |
| priv->wps_ie_len = 0; |
| priv->ap_11n_enabled = 0; |
| memset(&priv->roc_cfg, 0, sizeof(priv->roc_cfg)); |
| |
| priv->scan_block = false; |
| |
| priv->csa_chan = 0; |
| priv->csa_expire_time = 0; |
| priv->del_list_idx = 0; |
| priv->hs2_enabled = false; |
| priv->check_tdls_tx = false; |
| memcpy(priv->tos_to_tid_inv, tos_to_tid_inv, MAX_NUM_TID); |
| |
| mwifiex_init_11h_params(priv); |
| |
| return mwifiex_add_bss_prio_tbl(priv); |
| } |
| |
| /* |
| * This function allocates buffers for members of the adapter |
| * structure. |
| * |
| * The memory allocated includes scan table, command buffers, and |
| * sleep confirm command buffer. In addition, the queues are |
| * also initialized. |
| */ |
| static int mwifiex_allocate_adapter(struct mwifiex_adapter *adapter) |
| { |
| int ret; |
| |
| /* Allocate command buffer */ |
| ret = mwifiex_alloc_cmd_buffer(adapter); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: failed to alloc cmd buffer\n", |
| __func__); |
| return -1; |
| } |
| |
| adapter->sleep_cfm = |
| dev_alloc_skb(sizeof(struct mwifiex_opt_sleep_confirm) |
| + INTF_HEADER_LEN); |
| |
| if (!adapter->sleep_cfm) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: failed to alloc sleep cfm\t" |
| " cmd buffer\n", __func__); |
| return -1; |
| } |
| skb_reserve(adapter->sleep_cfm, INTF_HEADER_LEN); |
| |
| return 0; |
| } |
| |
| /* |
| * This function initializes the adapter structure and sets default |
| * values to the members of adapter. |
| * |
| * This also initializes the WMM related parameters in the driver private |
| * structures. |
| */ |
| static void mwifiex_init_adapter(struct mwifiex_adapter *adapter) |
| { |
| struct mwifiex_opt_sleep_confirm *sleep_cfm_buf = NULL; |
| |
| skb_put(adapter->sleep_cfm, sizeof(struct mwifiex_opt_sleep_confirm)); |
| |
| adapter->cmd_sent = false; |
| |
| if (adapter->iface_type == MWIFIEX_SDIO) |
| adapter->data_sent = true; |
| else |
| adapter->data_sent = false; |
| |
| if (adapter->iface_type == MWIFIEX_USB) |
| adapter->intf_hdr_len = 0; |
| else |
| adapter->intf_hdr_len = INTF_HEADER_LEN; |
| |
| adapter->cmd_resp_received = false; |
| adapter->event_received = false; |
| adapter->data_received = false; |
| |
| clear_bit(MWIFIEX_SURPRISE_REMOVED, &adapter->work_flags); |
| |
| adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING; |
| |
| adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM; |
| adapter->ps_state = PS_STATE_AWAKE; |
| adapter->need_to_wakeup = false; |
| |
| adapter->scan_mode = HostCmd_BSS_MODE_ANY; |
| adapter->specific_scan_time = MWIFIEX_SPECIFIC_SCAN_CHAN_TIME; |
| adapter->active_scan_time = MWIFIEX_ACTIVE_SCAN_CHAN_TIME; |
| adapter->passive_scan_time = MWIFIEX_PASSIVE_SCAN_CHAN_TIME; |
| adapter->scan_chan_gap_time = MWIFIEX_DEF_SCAN_CHAN_GAP_TIME; |
| |
| adapter->scan_probes = 1; |
| |
| adapter->multiple_dtim = 1; |
| |
| adapter->local_listen_interval = 0; /* default value in firmware |
| will be used */ |
| |
| adapter->is_deep_sleep = false; |
| |
| adapter->delay_null_pkt = false; |
| adapter->delay_to_ps = 1000; |
| adapter->enhanced_ps_mode = PS_MODE_AUTO; |
| |
| adapter->gen_null_pkt = false; /* Disable NULL Pkg generation by |
| default */ |
| adapter->pps_uapsd_mode = false; /* Disable pps/uapsd mode by |
| default */ |
| adapter->pm_wakeup_card_req = false; |
| |
| adapter->pm_wakeup_fw_try = false; |
| |
| adapter->curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; |
| |
| clear_bit(MWIFIEX_IS_HS_CONFIGURED, &adapter->work_flags); |
| adapter->hs_cfg.conditions = cpu_to_le32(HS_CFG_COND_DEF); |
| adapter->hs_cfg.gpio = HS_CFG_GPIO_DEF; |
| adapter->hs_cfg.gap = HS_CFG_GAP_DEF; |
| adapter->hs_activated = false; |
| |
| memset(adapter->event_body, 0, sizeof(adapter->event_body)); |
| adapter->hw_dot_11n_dev_cap = 0; |
| adapter->hw_dev_mcs_support = 0; |
| adapter->sec_chan_offset = 0; |
| adapter->adhoc_11n_enabled = false; |
| |
| mwifiex_wmm_init(adapter); |
| atomic_set(&adapter->tx_hw_pending, 0); |
| |
| sleep_cfm_buf = (struct mwifiex_opt_sleep_confirm *) |
| adapter->sleep_cfm->data; |
| memset(sleep_cfm_buf, 0, adapter->sleep_cfm->len); |
| sleep_cfm_buf->command = cpu_to_le16(HostCmd_CMD_802_11_PS_MODE_ENH); |
| sleep_cfm_buf->size = cpu_to_le16(adapter->sleep_cfm->len); |
| sleep_cfm_buf->result = 0; |
| sleep_cfm_buf->action = cpu_to_le16(SLEEP_CONFIRM); |
| sleep_cfm_buf->resp_ctrl = cpu_to_le16(RESP_NEEDED); |
| |
| memset(&adapter->sleep_params, 0, sizeof(adapter->sleep_params)); |
| memset(&adapter->sleep_period, 0, sizeof(adapter->sleep_period)); |
| adapter->tx_lock_flag = false; |
| adapter->null_pkt_interval = 0; |
| adapter->fw_bands = 0; |
| adapter->config_bands = 0; |
| adapter->adhoc_start_band = 0; |
| adapter->scan_channels = NULL; |
| adapter->fw_release_number = 0; |
| adapter->fw_cap_info = 0; |
| memset(&adapter->upld_buf, 0, sizeof(adapter->upld_buf)); |
| adapter->event_cause = 0; |
| adapter->region_code = 0; |
| adapter->bcn_miss_time_out = DEFAULT_BCN_MISS_TIMEOUT; |
| adapter->adhoc_awake_period = 0; |
| memset(&adapter->arp_filter, 0, sizeof(adapter->arp_filter)); |
| adapter->arp_filter_size = 0; |
| adapter->max_mgmt_ie_index = MAX_MGMT_IE_INDEX; |
| adapter->mfg_mode = mfg_mode; |
| adapter->key_api_major_ver = 0; |
| adapter->key_api_minor_ver = 0; |
| eth_broadcast_addr(adapter->perm_addr); |
| adapter->iface_limit.sta_intf = MWIFIEX_MAX_STA_NUM; |
| adapter->iface_limit.uap_intf = MWIFIEX_MAX_UAP_NUM; |
| adapter->iface_limit.p2p_intf = MWIFIEX_MAX_P2P_NUM; |
| adapter->active_scan_triggered = false; |
| timer_setup(&adapter->wakeup_timer, wakeup_timer_fn, 0); |
| adapter->devdump_len = 0; |
| timer_setup(&adapter->devdump_timer, fw_dump_timer_fn, 0); |
| } |
| |
| /* |
| * This function sets trans_start per tx_queue |
| */ |
| void mwifiex_set_trans_start(struct net_device *dev) |
| { |
| int i; |
| |
| for (i = 0; i < dev->num_tx_queues; i++) |
| netdev_get_tx_queue(dev, i)->trans_start = jiffies; |
| |
| netif_trans_update(dev); |
| } |
| |
| /* |
| * This function wakes up all queues in net_device |
| */ |
| void mwifiex_wake_up_net_dev_queue(struct net_device *netdev, |
| struct mwifiex_adapter *adapter) |
| { |
| spin_lock_bh(&adapter->queue_lock); |
| netif_tx_wake_all_queues(netdev); |
| spin_unlock_bh(&adapter->queue_lock); |
| } |
| |
| /* |
| * This function stops all queues in net_device |
| */ |
| void mwifiex_stop_net_dev_queue(struct net_device *netdev, |
| struct mwifiex_adapter *adapter) |
| { |
| spin_lock_bh(&adapter->queue_lock); |
| netif_tx_stop_all_queues(netdev); |
| spin_unlock_bh(&adapter->queue_lock); |
| } |
| |
| /* |
| * This function invalidates the list heads. |
| */ |
| static void mwifiex_invalidate_lists(struct mwifiex_adapter *adapter) |
| { |
| struct mwifiex_private *priv; |
| s32 i, j; |
| |
| list_del(&adapter->cmd_free_q); |
| list_del(&adapter->cmd_pending_q); |
| list_del(&adapter->scan_pending_q); |
| |
| for (i = 0; i < adapter->priv_num; i++) |
| list_del(&adapter->bss_prio_tbl[i].bss_prio_head); |
| |
| for (i = 0; i < adapter->priv_num; i++) { |
| if (adapter->priv[i]) { |
| priv = adapter->priv[i]; |
| for (j = 0; j < MAX_NUM_TID; ++j) |
| list_del(&priv->wmm.tid_tbl_ptr[j].ra_list); |
| list_del(&priv->tx_ba_stream_tbl_ptr); |
| list_del(&priv->rx_reorder_tbl_ptr); |
| list_del(&priv->sta_list); |
| list_del(&priv->auto_tdls_list); |
| } |
| } |
| } |
| |
| /* |
| * This function performs cleanup for adapter structure. |
| * |
| * The cleanup is done recursively, by canceling all pending |
| * commands, freeing the member buffers previously allocated |
| * (command buffers, scan table buffer, sleep confirm command |
| * buffer), stopping the timers and calling the cleanup routines |
| * for every interface. |
| */ |
| static void |
| mwifiex_adapter_cleanup(struct mwifiex_adapter *adapter) |
| { |
| del_timer(&adapter->wakeup_timer); |
| del_timer_sync(&adapter->devdump_timer); |
| mwifiex_cancel_all_pending_cmd(adapter); |
| wake_up_interruptible(&adapter->cmd_wait_q.wait); |
| wake_up_interruptible(&adapter->hs_activate_wait_q); |
| } |
| |
| void mwifiex_free_cmd_buffers(struct mwifiex_adapter *adapter) |
| { |
| mwifiex_invalidate_lists(adapter); |
| |
| /* Free command buffer */ |
| mwifiex_dbg(adapter, INFO, "info: free cmd buffer\n"); |
| mwifiex_free_cmd_buffer(adapter); |
| |
| if (adapter->sleep_cfm) |
| dev_kfree_skb_any(adapter->sleep_cfm); |
| } |
| |
| /* |
| * This function intializes the lock variables and |
| * the list heads. |
| */ |
| int mwifiex_init_lock_list(struct mwifiex_adapter *adapter) |
| { |
| struct mwifiex_private *priv; |
| s32 i, j; |
| |
| spin_lock_init(&adapter->int_lock); |
| spin_lock_init(&adapter->main_proc_lock); |
| spin_lock_init(&adapter->mwifiex_cmd_lock); |
| spin_lock_init(&adapter->queue_lock); |
| for (i = 0; i < adapter->priv_num; i++) { |
| if (adapter->priv[i]) { |
| priv = adapter->priv[i]; |
| spin_lock_init(&priv->wmm.ra_list_spinlock); |
| spin_lock_init(&priv->curr_bcn_buf_lock); |
| spin_lock_init(&priv->sta_list_spinlock); |
| spin_lock_init(&priv->auto_tdls_lock); |
| } |
| } |
| |
| /* Initialize cmd_free_q */ |
| INIT_LIST_HEAD(&adapter->cmd_free_q); |
| /* Initialize cmd_pending_q */ |
| INIT_LIST_HEAD(&adapter->cmd_pending_q); |
| /* Initialize scan_pending_q */ |
| INIT_LIST_HEAD(&adapter->scan_pending_q); |
| |
| spin_lock_init(&adapter->cmd_free_q_lock); |
| spin_lock_init(&adapter->cmd_pending_q_lock); |
| spin_lock_init(&adapter->scan_pending_q_lock); |
| spin_lock_init(&adapter->rx_proc_lock); |
| |
| skb_queue_head_init(&adapter->rx_data_q); |
| skb_queue_head_init(&adapter->tx_data_q); |
| |
| for (i = 0; i < adapter->priv_num; ++i) { |
| INIT_LIST_HEAD(&adapter->bss_prio_tbl[i].bss_prio_head); |
| spin_lock_init(&adapter->bss_prio_tbl[i].bss_prio_lock); |
| } |
| |
| for (i = 0; i < adapter->priv_num; i++) { |
| if (!adapter->priv[i]) |
| continue; |
| priv = adapter->priv[i]; |
| for (j = 0; j < MAX_NUM_TID; ++j) |
| INIT_LIST_HEAD(&priv->wmm.tid_tbl_ptr[j].ra_list); |
| INIT_LIST_HEAD(&priv->tx_ba_stream_tbl_ptr); |
| INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr); |
| INIT_LIST_HEAD(&priv->sta_list); |
| INIT_LIST_HEAD(&priv->auto_tdls_list); |
| skb_queue_head_init(&priv->tdls_txq); |
| skb_queue_head_init(&priv->bypass_txq); |
| |
| spin_lock_init(&priv->tx_ba_stream_tbl_lock); |
| spin_lock_init(&priv->rx_reorder_tbl_lock); |
| |
| spin_lock_init(&priv->ack_status_lock); |
| idr_init(&priv->ack_status_frames); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * This function initializes the firmware. |
| * |
| * The following operations are performed sequentially - |
| * - Allocate adapter structure |
| * - Initialize the adapter structure |
| * - Initialize the private structure |
| * - Add BSS priority tables to the adapter structure |
| * - For each interface, send the init commands to firmware |
| * - Send the first command in command pending queue, if available |
| */ |
| int mwifiex_init_fw(struct mwifiex_adapter *adapter) |
| { |
| int ret; |
| struct mwifiex_private *priv; |
| u8 i, first_sta = true; |
| int is_cmd_pend_q_empty; |
| |
| adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING; |
| |
| /* Allocate memory for member of adapter structure */ |
| ret = mwifiex_allocate_adapter(adapter); |
| if (ret) |
| return -1; |
| |
| /* Initialize adapter structure */ |
| mwifiex_init_adapter(adapter); |
| |
| for (i = 0; i < adapter->priv_num; i++) { |
| if (adapter->priv[i]) { |
| priv = adapter->priv[i]; |
| |
| /* Initialize private structure */ |
| ret = mwifiex_init_priv(priv); |
| if (ret) |
| return -1; |
| } |
| } |
| if (adapter->mfg_mode) { |
| adapter->hw_status = MWIFIEX_HW_STATUS_READY; |
| ret = -EINPROGRESS; |
| } else { |
| for (i = 0; i < adapter->priv_num; i++) { |
| if (adapter->priv[i]) { |
| ret = mwifiex_sta_init_cmd(adapter->priv[i], |
| first_sta, true); |
| if (ret == -1) |
| return -1; |
| |
| first_sta = false; |
| } |
| |
| |
| |
| } |
| } |
| |
| spin_lock_bh(&adapter->cmd_pending_q_lock); |
| is_cmd_pend_q_empty = list_empty(&adapter->cmd_pending_q); |
| spin_unlock_bh(&adapter->cmd_pending_q_lock); |
| if (!is_cmd_pend_q_empty) { |
| /* Send the first command in queue and return */ |
| if (mwifiex_main_process(adapter) != -1) |
| ret = -EINPROGRESS; |
| } else { |
| adapter->hw_status = MWIFIEX_HW_STATUS_READY; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * This function deletes the BSS priority tables. |
| * |
| * The function traverses through all the allocated BSS priority nodes |
| * in every BSS priority table and frees them. |
| */ |
| static void mwifiex_delete_bss_prio_tbl(struct mwifiex_private *priv) |
| { |
| int i; |
| struct mwifiex_adapter *adapter = priv->adapter; |
| struct mwifiex_bss_prio_node *bssprio_node, *tmp_node; |
| struct list_head *head; |
| spinlock_t *lock; /* bss priority lock */ |
| |
| for (i = 0; i < adapter->priv_num; ++i) { |
| head = &adapter->bss_prio_tbl[i].bss_prio_head; |
| lock = &adapter->bss_prio_tbl[i].bss_prio_lock; |
| mwifiex_dbg(adapter, INFO, |
| "info: delete BSS priority table,\t" |
| "bss_type = %d, bss_num = %d, i = %d,\t" |
| "head = %p\n", |
| priv->bss_type, priv->bss_num, i, head); |
| |
| { |
| spin_lock_bh(lock); |
| list_for_each_entry_safe(bssprio_node, tmp_node, head, |
| list) { |
| if (bssprio_node->priv == priv) { |
| mwifiex_dbg(adapter, INFO, |
| "info: Delete\t" |
| "node %p, next = %p\n", |
| bssprio_node, tmp_node); |
| list_del(&bssprio_node->list); |
| kfree(bssprio_node); |
| } |
| } |
| spin_unlock_bh(lock); |
| } |
| } |
| } |
| |
| /* |
| * This function frees the private structure, including cleans |
| * up the TX and RX queues and frees the BSS priority tables. |
| */ |
| void mwifiex_free_priv(struct mwifiex_private *priv) |
| { |
| mwifiex_clean_txrx(priv); |
| mwifiex_delete_bss_prio_tbl(priv); |
| mwifiex_free_curr_bcn(priv); |
| } |
| |
| /* |
| * This function is used to shutdown the driver. |
| * |
| * The following operations are performed sequentially - |
| * - Check if already shut down |
| * - Make sure the main process has stopped |
| * - Clean up the Tx and Rx queues |
| * - Delete BSS priority tables |
| * - Free the adapter |
| * - Notify completion |
| */ |
| void |
| mwifiex_shutdown_drv(struct mwifiex_adapter *adapter) |
| { |
| struct mwifiex_private *priv; |
| s32 i; |
| struct sk_buff *skb; |
| |
| /* mwifiex already shutdown */ |
| if (adapter->hw_status == MWIFIEX_HW_STATUS_NOT_READY) |
| return; |
| |
| /* cancel current command */ |
| if (adapter->curr_cmd) { |
| mwifiex_dbg(adapter, WARN, |
| "curr_cmd is still in processing\n"); |
| del_timer_sync(&adapter->cmd_timer); |
| mwifiex_recycle_cmd_node(adapter, adapter->curr_cmd); |
| adapter->curr_cmd = NULL; |
| } |
| |
| /* shut down mwifiex */ |
| mwifiex_dbg(adapter, MSG, |
| "info: shutdown mwifiex...\n"); |
| |
| /* Clean up Tx/Rx queues and delete BSS priority table */ |
| for (i = 0; i < adapter->priv_num; i++) { |
| if (adapter->priv[i]) { |
| priv = adapter->priv[i]; |
| |
| mwifiex_clean_auto_tdls(priv); |
| mwifiex_abort_cac(priv); |
| mwifiex_free_priv(priv); |
| } |
| } |
| |
| atomic_set(&adapter->tx_queued, 0); |
| while ((skb = skb_dequeue(&adapter->tx_data_q))) |
| mwifiex_write_data_complete(adapter, skb, 0, 0); |
| |
| spin_lock_bh(&adapter->rx_proc_lock); |
| |
| while ((skb = skb_dequeue(&adapter->rx_data_q))) { |
| struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb); |
| |
| atomic_dec(&adapter->rx_pending); |
| priv = adapter->priv[rx_info->bss_num]; |
| if (priv) |
| priv->stats.rx_dropped++; |
| |
| dev_kfree_skb_any(skb); |
| } |
| |
| spin_unlock_bh(&adapter->rx_proc_lock); |
| |
| mwifiex_adapter_cleanup(adapter); |
| |
| adapter->hw_status = MWIFIEX_HW_STATUS_NOT_READY; |
| } |
| |
| /* |
| * This function downloads the firmware to the card. |
| * |
| * The actual download is preceded by two sanity checks - |
| * - Check if firmware is already running |
| * - Check if the interface is the winner to download the firmware |
| * |
| * ...and followed by another - |
| * - Check if the firmware is downloaded successfully |
| * |
| * After download is successfully completed, the host interrupts are enabled. |
| */ |
| int mwifiex_dnld_fw(struct mwifiex_adapter *adapter, |
| struct mwifiex_fw_image *pmfw) |
| { |
| int ret; |
| u32 poll_num = 1; |
| |
| if (adapter->if_ops.check_fw_status) { |
| /* check if firmware is already running */ |
| ret = adapter->if_ops.check_fw_status(adapter, poll_num); |
| if (!ret) { |
| mwifiex_dbg(adapter, MSG, |
| "WLAN FW already running! Skip FW dnld\n"); |
| return 0; |
| } |
| } |
| |
| /* check if we are the winner for downloading FW */ |
| if (adapter->if_ops.check_winner_status) { |
| adapter->winner = 0; |
| ret = adapter->if_ops.check_winner_status(adapter); |
| |
| poll_num = MAX_FIRMWARE_POLL_TRIES; |
| if (ret) { |
| mwifiex_dbg(adapter, MSG, |
| "WLAN read winner status failed!\n"); |
| return ret; |
| } |
| |
| if (!adapter->winner) { |
| mwifiex_dbg(adapter, MSG, |
| "WLAN is not the winner! Skip FW dnld\n"); |
| goto poll_fw; |
| } |
| } |
| |
| if (pmfw) { |
| /* Download firmware with helper */ |
| ret = adapter->if_ops.prog_fw(adapter, pmfw); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, |
| "prog_fw failed ret=%#x\n", ret); |
| return ret; |
| } |
| } |
| |
| poll_fw: |
| /* Check if the firmware is downloaded successfully or not */ |
| ret = adapter->if_ops.check_fw_status(adapter, poll_num); |
| if (ret) |
| mwifiex_dbg(adapter, ERROR, |
| "FW failed to be active in time\n"); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(mwifiex_dnld_fw); |