arch/mips/ath25/ar2315.c - linux - Git at Google

 /*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
  * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
  * Copyright (C) 2006 FON Technology, SL.
  * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
  * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
  * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
  */

 /*
  * Platform devices for Atheros AR2315 SoCs
  */

 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/bitops.h>
 #include <linux/irqdomain.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
 #include <asm/time.h>

 #include <ath25_platform.h>

 #include "devices.h"
 #include "ar2315.h"
 #include "ar2315_regs.h"

 static void __iomem *ar2315_rst_base;
 static struct irq_domain *ar2315_misc_irq_domain;

 static inline u32 ar2315_rst_reg_read(u32 reg)
 {
 	return __raw_readl(ar2315_rst_base + reg);
 }

 static inline void ar2315_rst_reg_write(u32 reg, u32 val)
 {
 	__raw_writel(val, ar2315_rst_base + reg);
 }

 static inline void ar2315_rst_reg_mask(u32 reg, u32 mask, u32 val)
 {
 	u32 ret = ar2315_rst_reg_read(reg);

 	ret &= ~mask;
 	ret |= val;
 	ar2315_rst_reg_write(reg, ret);
 }

 static irqreturn_t ar2315_ahb_err_handler(int cpl, void *dev_id)
 {
 	ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET);
 	ar2315_rst_reg_read(AR2315_AHB_ERR1);

 	pr_emerg("AHB fatal error\n");
 	machine_restart("AHB error"); /* Catastrophic failure */

 	return IRQ_HANDLED;
 }

 static void ar2315_misc_irq_handler(struct irq_desc *desc)
 {
 	u32 pending = ar2315_rst_reg_read(AR2315_ISR) &
 		      ar2315_rst_reg_read(AR2315_IMR);
 	unsigned nr, misc_irq = 0;

 	if (pending) {
 		struct irq_domain *domain = irq_desc_get_handler_data(desc);

 		nr = __ffs(pending);
 		misc_irq = irq_find_mapping(domain, nr);
 	}

 	if (misc_irq) {
 		if (nr == AR2315_MISC_IRQ_GPIO)
 			ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_GPIO);
 		else if (nr == AR2315_MISC_IRQ_WATCHDOG)
 			ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_WD);
 		generic_handle_irq(misc_irq);
 	} else {
 		spurious_interrupt();
 	}
 }

 static void ar2315_misc_irq_unmask(struct irq_data *d)
 {
 	ar2315_rst_reg_mask(AR2315_IMR, 0, BIT(d->hwirq));
 }

 static void ar2315_misc_irq_mask(struct irq_data *d)
 {
 	ar2315_rst_reg_mask(AR2315_IMR, BIT(d->hwirq), 0);
 }

 static struct irq_chip ar2315_misc_irq_chip = {
 	.name		= "ar2315-misc",
 	.irq_unmask	= ar2315_misc_irq_unmask,
 	.irq_mask	= ar2315_misc_irq_mask,
 };

 static int ar2315_misc_irq_map(struct irq_domain *d, unsigned irq,
 			       irq_hw_number_t hw)
 {
 	irq_set_chip_and_handler(irq, &ar2315_misc_irq_chip, handle_level_irq);
 	return 0;
 }

 static struct irq_domain_ops ar2315_misc_irq_domain_ops = {
 	.map = ar2315_misc_irq_map,
 };

 /*
  * Called when an interrupt is received, this function
  * determines exactly which interrupt it was, and it
  * invokes the appropriate handler.
  *
  * Implicitly, we also define interrupt priority by
  * choosing which to dispatch first.
  */
 static void ar2315_irq_dispatch(void)
 {
 	u32 pending = read_c0_status() & read_c0_cause();

 	if (pending & CAUSEF_IP3)
 		do_IRQ(AR2315_IRQ_WLAN0);
 #ifdef CONFIG_PCI_AR2315
 	else if (pending & CAUSEF_IP5)
 		do_IRQ(AR2315_IRQ_LCBUS_PCI);
 #endif
 	else if (pending & CAUSEF_IP2)
 		do_IRQ(AR2315_IRQ_MISC);
 	else if (pending & CAUSEF_IP7)
 		do_IRQ(ATH25_IRQ_CPU_CLOCK);
 	else
 		spurious_interrupt();
 }

 void __init ar2315_arch_init_irq(void)
 {
 	struct irq_domain *domain;
 	unsigned irq;

 	ath25_irq_dispatch = ar2315_irq_dispatch;

 	domain = irq_domain_add_linear(NULL, AR2315_MISC_IRQ_COUNT,
 				       &ar2315_misc_irq_domain_ops, NULL);
 	if (!domain)
 		panic("Failed to add IRQ domain");

 	irq = irq_create_mapping(domain, AR2315_MISC_IRQ_AHB);
 	if (request_irq(irq, ar2315_ahb_err_handler, 0, "ar2315-ahb-error",
 			NULL))
 		pr_err("Failed to register ar2315-ahb-error interrupt\n");

 	irq_set_chained_handler_and_data(AR2315_IRQ_MISC,
 					 ar2315_misc_irq_handler, domain);

 	ar2315_misc_irq_domain = domain;
 }

 void __init ar2315_init_devices(void)
 {
 	/* Find board configuration */
 	ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE);

 	ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0);
 }

 static void ar2315_restart(char *command)
 {
 	void (*mips_reset_vec)(void) = (void *)0xbfc00000;

 	local_irq_disable();

 	/* try reset the system via reset control */
 	ar2315_rst_reg_write(AR2315_COLD_RESET, AR2317_RESET_SYSTEM);

 	/* Cold reset does not work on the AR2315/6, use the GPIO reset bits
 	 * a workaround. Give it some time to attempt a gpio based hardware
 	 * reset (atheros reference design workaround) */

 	/* TODO: implement the GPIO reset workaround */

 	/* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
 	 * workaround. Attempt to jump to the mips reset location -
 	 * the boot loader itself might be able to recover the system */
 	mips_reset_vec();
 }

 /*
  * This table is indexed by bits 5..4 of the CLOCKCTL1 register
  * to determine the predevisor value.
  */
 static int clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 };
 static int pllc_divide_table[5] __initdata = { 2, 3, 4, 6, 3 };

 static unsigned __init ar2315_sys_clk(u32 clock_ctl)
 {
 	unsigned int pllc_ctrl, cpu_div;
 	unsigned int pllc_out, refdiv, fdiv, divby2;
 	unsigned int clk_div;

 	pllc_ctrl = ar2315_rst_reg_read(AR2315_PLLC_CTL);
 	refdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_REF_DIV);
 	refdiv = clockctl1_predivide_table[refdiv];
 	fdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_FDBACK_DIV);
 	divby2 = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_ADD_FDBACK_DIV) + 1;
 	pllc_out = (40000000 / refdiv) * (2 * divby2) * fdiv;

 	/* clkm input selected */
 	switch (clock_ctl & AR2315_CPUCLK_CLK_SEL_M) {
 	case 0:
 	case 1:
 		clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKM_DIV);
 		clk_div = pllc_divide_table[clk_div];
 		break;
 	case 2:
 		clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKC_DIV);
 		clk_div = pllc_divide_table[clk_div];
 		break;
 	default:
 		pllc_out = 40000000;
 		clk_div = 1;
 		break;
 	}

 	cpu_div = ATH25_REG_MS(clock_ctl, AR2315_CPUCLK_CLK_DIV);
 	cpu_div = cpu_div * 2 ?: 1;

 	return pllc_out / (clk_div * cpu_div);
 }

 static inline unsigned ar2315_cpu_frequency(void)
 {
 	return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_CPUCLK));
 }

 static inline unsigned ar2315_apb_frequency(void)
 {
 	return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_AMBACLK));
 }

 void __init ar2315_plat_time_init(void)
 {
 	mips_hpt_frequency = ar2315_cpu_frequency() / 2;
 }

 void __init ar2315_plat_mem_setup(void)
 {
 	void __iomem *sdram_base;
 	u32 memsize, memcfg;
 	u32 devid;
 	u32 config;

 	/* Detect memory size */
 	sdram_base = ioremap(AR2315_SDRAMCTL_BASE,
 				     AR2315_SDRAMCTL_SIZE);
 	memcfg = __raw_readl(sdram_base + AR2315_MEM_CFG);
 	memsize   = 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_DATA_WIDTH);
 	memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_COL_WIDTH);
 	memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_ROW_WIDTH);
 	memsize <<= 3;
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 	iounmap(sdram_base);

 	ar2315_rst_base = ioremap(AR2315_RST_BASE, AR2315_RST_SIZE);

 	/* Detect the hardware based on the device ID */
 	devid = ar2315_rst_reg_read(AR2315_SREV) & AR2315_REV_CHIP;
 	switch (devid) {
 	case 0x91:	/* Need to check */
 		ath25_soc = ATH25_SOC_AR2318;
 		break;
 	case 0x90:
 		ath25_soc = ATH25_SOC_AR2317;
 		break;
 	case 0x87:
 		ath25_soc = ATH25_SOC_AR2316;
 		break;
 	case 0x86:
 	default:
 		ath25_soc = ATH25_SOC_AR2315;
 		break;
 	}
 	ath25_board.devid = devid;

 	/* Clear any lingering AHB errors */
 	config = read_c0_config();
 	write_c0_config(config & ~0x3);
 	ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET);
 	ar2315_rst_reg_read(AR2315_AHB_ERR1);
 	ar2315_rst_reg_write(AR2315_WDT_CTRL, AR2315_WDT_CTRL_IGNORE);

 	_machine_restart = ar2315_restart;
 }

 #ifdef CONFIG_PCI_AR2315
 static struct resource ar2315_pci_res[] = {
 	{
 		.name = "ar2315-pci-ctrl",
 		.flags = IORESOURCE_MEM,
 		.start = AR2315_PCI_BASE,
 		.end = AR2315_PCI_BASE + AR2315_PCI_SIZE - 1,
 	},
 	{
 		.name = "ar2315-pci-ext",
 		.flags = IORESOURCE_MEM,
 		.start = AR2315_PCI_EXT_BASE,
 		.end = AR2315_PCI_EXT_BASE + AR2315_PCI_EXT_SIZE - 1,
 	},
 	{
 		.name = "ar2315-pci",
 		.flags = IORESOURCE_IRQ,
 		.start = AR2315_IRQ_LCBUS_PCI,
 		.end = AR2315_IRQ_LCBUS_PCI,
 	},
 };
 #endif

 void __init ar2315_arch_init(void)
 {
 	unsigned irq = irq_create_mapping(ar2315_misc_irq_domain,
 					  AR2315_MISC_IRQ_UART0);

 	ath25_serial_setup(AR2315_UART0_BASE, irq, ar2315_apb_frequency());

 #ifdef CONFIG_PCI_AR2315
 	if (ath25_soc == ATH25_SOC_AR2315) {
 		/* Reset PCI DMA logic */
 		ar2315_rst_reg_mask(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
 		msleep(20);
 		ar2315_rst_reg_mask(AR2315_RESET, AR2315_RESET_PCIDMA, 0);
 		msleep(20);

 		/* Configure endians */
 		ar2315_rst_reg_mask(AR2315_ENDIAN_CTL, 0, AR2315_CONFIG_PCIAHB |
 				    AR2315_CONFIG_PCIAHB_BRIDGE);

 		/* Configure as PCI host with DMA */
 		ar2315_rst_reg_write(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
 				  (AR2315_PCICLK_IN_FREQ_DIV_6 <<
 				   AR2315_PCICLK_DIV_S));
 		ar2315_rst_reg_mask(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
 		ar2315_rst_reg_mask(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK |
 				    AR2315_IF_MASK, AR2315_IF_PCI |
 				    AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR |
 				    (AR2315_IF_PCI_CLK_OUTPUT_CLK <<
 				     AR2315_IF_PCI_CLK_SHIFT));

 		platform_device_register_simple("ar2315-pci", -1,
 						ar2315_pci_res,
 						ARRAY_SIZE(ar2315_pci_res));
 	}
 #endif
 }
	/*
	* This file is subject to the terms and conditions of the GNU General Public
	* License. See the file "COPYING" in the main directory of this archive
	* for more details.
	*
	* Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
	* Copyright (C) 2006 FON Technology, SL.
	* Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
	* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
	* Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
	*/

	/*
	* Platform devices for Atheros AR2315 SoCs
	*/

	#include <linux/init.h>
	#include <linux/kernel.h>
	#include <linux/bitops.h>
	#include <linux/irqdomain.h>
	#include <linux/interrupt.h>
	#include <linux/platform_device.h>
	#include <linux/reboot.h>
	#include <asm/bootinfo.h>
	#include <asm/reboot.h>
	#include <asm/time.h>

	#include <ath25_platform.h>

	#include "devices.h"
	#include "ar2315.h"
	#include "ar2315_regs.h"

	static void __iomem *ar2315_rst_base;
	static struct irq_domain *ar2315_misc_irq_domain;

	static inline u32 ar2315_rst_reg_read(u32 reg)
	{
	return __raw_readl(ar2315_rst_base + reg);
	}

	static inline void ar2315_rst_reg_write(u32 reg, u32 val)
	{
	__raw_writel(val, ar2315_rst_base + reg);
	}

	static inline void ar2315_rst_reg_mask(u32 reg, u32 mask, u32 val)
	{
	u32 ret = ar2315_rst_reg_read(reg);

	ret &= ~mask;
	ret \|= val;
	ar2315_rst_reg_write(reg, ret);
	}

	static irqreturn_t ar2315_ahb_err_handler(int cpl, void *dev_id)
	{
	ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET);
	ar2315_rst_reg_read(AR2315_AHB_ERR1);

	pr_emerg("AHB fatal error\n");
	machine_restart("AHB error"); /* Catastrophic failure */

	return IRQ_HANDLED;
	}

	static void ar2315_misc_irq_handler(struct irq_desc *desc)
	{
	u32 pending = ar2315_rst_reg_read(AR2315_ISR) &
	ar2315_rst_reg_read(AR2315_IMR);
	unsigned nr, misc_irq = 0;

	if (pending) {
	struct irq_domain *domain = irq_desc_get_handler_data(desc);

	nr = __ffs(pending);
	misc_irq = irq_find_mapping(domain, nr);
	}

	if (misc_irq) {
	if (nr == AR2315_MISC_IRQ_GPIO)
	ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_GPIO);
	else if (nr == AR2315_MISC_IRQ_WATCHDOG)
	ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_WD);
	generic_handle_irq(misc_irq);
	} else {
	spurious_interrupt();
	}
	}

	static void ar2315_misc_irq_unmask(struct irq_data *d)
	{
	ar2315_rst_reg_mask(AR2315_IMR, 0, BIT(d->hwirq));
	}

	static void ar2315_misc_irq_mask(struct irq_data *d)
	{
	ar2315_rst_reg_mask(AR2315_IMR, BIT(d->hwirq), 0);
	}

	static struct irq_chip ar2315_misc_irq_chip = {
	.name = "ar2315-misc",
	.irq_unmask = ar2315_misc_irq_unmask,
	.irq_mask = ar2315_misc_irq_mask,
	};

	static int ar2315_misc_irq_map(struct irq_domain *d, unsigned irq,
	irq_hw_number_t hw)
	{
	irq_set_chip_and_handler(irq, &ar2315_misc_irq_chip, handle_level_irq);
	return 0;
	}

	static struct irq_domain_ops ar2315_misc_irq_domain_ops = {
	.map = ar2315_misc_irq_map,
	};

	/*
	* Called when an interrupt is received, this function
	* determines exactly which interrupt it was, and it
	* invokes the appropriate handler.
	*
	* Implicitly, we also define interrupt priority by
	* choosing which to dispatch first.
	*/
	static void ar2315_irq_dispatch(void)
	{
	u32 pending = read_c0_status() & read_c0_cause();

	if (pending & CAUSEF_IP3)
	do_IRQ(AR2315_IRQ_WLAN0);
	#ifdef CONFIG_PCI_AR2315
	else if (pending & CAUSEF_IP5)
	do_IRQ(AR2315_IRQ_LCBUS_PCI);
	#endif
	else if (pending & CAUSEF_IP2)
	do_IRQ(AR2315_IRQ_MISC);
	else if (pending & CAUSEF_IP7)
	do_IRQ(ATH25_IRQ_CPU_CLOCK);
	else
	spurious_interrupt();
	}

	void __init ar2315_arch_init_irq(void)
	{
	struct irq_domain *domain;
	unsigned irq;

	ath25_irq_dispatch = ar2315_irq_dispatch;

	domain = irq_domain_add_linear(NULL, AR2315_MISC_IRQ_COUNT,
	&ar2315_misc_irq_domain_ops, NULL);
	if (!domain)
	panic("Failed to add IRQ domain");

	irq = irq_create_mapping(domain, AR2315_MISC_IRQ_AHB);
	if (request_irq(irq, ar2315_ahb_err_handler, 0, "ar2315-ahb-error",
	NULL))
	pr_err("Failed to register ar2315-ahb-error interrupt\n");

	irq_set_chained_handler_and_data(AR2315_IRQ_MISC,
	ar2315_misc_irq_handler, domain);

	ar2315_misc_irq_domain = domain;
	}

	void __init ar2315_init_devices(void)
	{
	/* Find board configuration */
	ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE);

	ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0);
	}

	static void ar2315_restart(char *command)
	{
	void (mips_reset_vec)(void) = (void )0xbfc00000;

	local_irq_disable();

	/* try reset the system via reset control */
	ar2315_rst_reg_write(AR2315_COLD_RESET, AR2317_RESET_SYSTEM);

	/* Cold reset does not work on the AR2315/6, use the GPIO reset bits
	* a workaround. Give it some time to attempt a gpio based hardware
	* reset (atheros reference design workaround) */

	/* TODO: implement the GPIO reset workaround */

	/* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
	* workaround. Attempt to jump to the mips reset location -
	* the boot loader itself might be able to recover the system */
	mips_reset_vec();
	}

	/*
	* This table is indexed by bits 5..4 of the CLOCKCTL1 register
	* to determine the predevisor value.
	*/
	static int clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 };
	static int pllc_divide_table[5] __initdata = { 2, 3, 4, 6, 3 };

	static unsigned __init ar2315_sys_clk(u32 clock_ctl)
	{
	unsigned int pllc_ctrl, cpu_div;
	unsigned int pllc_out, refdiv, fdiv, divby2;
	unsigned int clk_div;

	pllc_ctrl = ar2315_rst_reg_read(AR2315_PLLC_CTL);
	refdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_REF_DIV);
	refdiv = clockctl1_predivide_table[refdiv];
	fdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_FDBACK_DIV);
	divby2 = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_ADD_FDBACK_DIV) + 1;
	pllc_out = (40000000 / refdiv) * (2 * divby2) * fdiv;

	/* clkm input selected */
	switch (clock_ctl & AR2315_CPUCLK_CLK_SEL_M) {
	case 0:
	case 1:
	clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKM_DIV);
	clk_div = pllc_divide_table[clk_div];
	break;
	case 2:
	clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKC_DIV);
	clk_div = pllc_divide_table[clk_div];
	break;
	default:
	pllc_out = 40000000;
	clk_div = 1;
	break;
	}

	cpu_div = ATH25_REG_MS(clock_ctl, AR2315_CPUCLK_CLK_DIV);
	cpu_div = cpu_div * 2 ?: 1;

	return pllc_out / (clk_div * cpu_div);
	}

	static inline unsigned ar2315_cpu_frequency(void)
	{
	return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_CPUCLK));
	}

	static inline unsigned ar2315_apb_frequency(void)
	{
	return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_AMBACLK));
	}

	void __init ar2315_plat_time_init(void)
	{
	mips_hpt_frequency = ar2315_cpu_frequency() / 2;
	}

	void __init ar2315_plat_mem_setup(void)
	{
	void __iomem *sdram_base;
	u32 memsize, memcfg;
	u32 devid;
	u32 config;

	/* Detect memory size */
	sdram_base = ioremap(AR2315_SDRAMCTL_BASE,
	AR2315_SDRAMCTL_SIZE);
	memcfg = __raw_readl(sdram_base + AR2315_MEM_CFG);
	memsize = 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_DATA_WIDTH);
	memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_COL_WIDTH);
	memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_ROW_WIDTH);
	memsize <<= 3;
	add_memory_region(0, memsize, BOOT_MEM_RAM);
	iounmap(sdram_base);

	ar2315_rst_base = ioremap(AR2315_RST_BASE, AR2315_RST_SIZE);

	/* Detect the hardware based on the device ID */
	devid = ar2315_rst_reg_read(AR2315_SREV) & AR2315_REV_CHIP;
	switch (devid) {
	case 0x91: /* Need to check */
	ath25_soc = ATH25_SOC_AR2318;
	break;
	case 0x90:
	ath25_soc = ATH25_SOC_AR2317;
	break;
	case 0x87:
	ath25_soc = ATH25_SOC_AR2316;
	break;
	case 0x86:
	default:
	ath25_soc = ATH25_SOC_AR2315;
	break;
	}
	ath25_board.devid = devid;

	/* Clear any lingering AHB errors */
	config = read_c0_config();
	write_c0_config(config & ~0x3);
	ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET);
	ar2315_rst_reg_read(AR2315_AHB_ERR1);
	ar2315_rst_reg_write(AR2315_WDT_CTRL, AR2315_WDT_CTRL_IGNORE);

	_machine_restart = ar2315_restart;
	}

	#ifdef CONFIG_PCI_AR2315
	static struct resource ar2315_pci_res[] = {
	{
	.name = "ar2315-pci-ctrl",
	.flags = IORESOURCE_MEM,
	.start = AR2315_PCI_BASE,
	.end = AR2315_PCI_BASE + AR2315_PCI_SIZE - 1,
	},
	{
	.name = "ar2315-pci-ext",
	.flags = IORESOURCE_MEM,
	.start = AR2315_PCI_EXT_BASE,
	.end = AR2315_PCI_EXT_BASE + AR2315_PCI_EXT_SIZE - 1,
	},
	{
	.name = "ar2315-pci",
	.flags = IORESOURCE_IRQ,
	.start = AR2315_IRQ_LCBUS_PCI,
	.end = AR2315_IRQ_LCBUS_PCI,
	},
	};
	#endif

	void __init ar2315_arch_init(void)
	{
	unsigned irq = irq_create_mapping(ar2315_misc_irq_domain,
	AR2315_MISC_IRQ_UART0);

	ath25_serial_setup(AR2315_UART0_BASE, irq, ar2315_apb_frequency());

	#ifdef CONFIG_PCI_AR2315
	if (ath25_soc == ATH25_SOC_AR2315) {
	/* Reset PCI DMA logic */
	ar2315_rst_reg_mask(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
	msleep(20);
	ar2315_rst_reg_mask(AR2315_RESET, AR2315_RESET_PCIDMA, 0);
	msleep(20);

	/* Configure endians */
	ar2315_rst_reg_mask(AR2315_ENDIAN_CTL, 0, AR2315_CONFIG_PCIAHB \|
	AR2315_CONFIG_PCIAHB_BRIDGE);

	/* Configure as PCI host with DMA */
	ar2315_rst_reg_write(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM \|
	(AR2315_PCICLK_IN_FREQ_DIV_6 <<
	AR2315_PCICLK_DIV_S));
	ar2315_rst_reg_mask(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
	ar2315_rst_reg_mask(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK \|
	AR2315_IF_MASK, AR2315_IF_PCI \|
	AR2315_IF_PCI_HOST \| AR2315_IF_PCI_INTR \|
	(AR2315_IF_PCI_CLK_OUTPUT_CLK <<
	AR2315_IF_PCI_CLK_SHIFT));

	platform_device_register_simple("ar2315-pci", -1,
	ar2315_pci_res,
	ARRAY_SIZE(ar2315_pci_res));
	}
	#endif
	}