| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2020 Invensense, Inc. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/mutex.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/delay.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/buffer.h> |
| |
| #include "inv_icm42600.h" |
| #include "inv_icm42600_timestamp.h" |
| #include "inv_icm42600_buffer.h" |
| |
| /* FIFO header: 1 byte */ |
| #define INV_ICM42600_FIFO_HEADER_MSG BIT(7) |
| #define INV_ICM42600_FIFO_HEADER_ACCEL BIT(6) |
| #define INV_ICM42600_FIFO_HEADER_GYRO BIT(5) |
| #define INV_ICM42600_FIFO_HEADER_TMST_FSYNC GENMASK(3, 2) |
| #define INV_ICM42600_FIFO_HEADER_ODR_ACCEL BIT(1) |
| #define INV_ICM42600_FIFO_HEADER_ODR_GYRO BIT(0) |
| |
| struct inv_icm42600_fifo_1sensor_packet { |
| uint8_t header; |
| struct inv_icm42600_fifo_sensor_data data; |
| int8_t temp; |
| } __packed; |
| #define INV_ICM42600_FIFO_1SENSOR_PACKET_SIZE 8 |
| |
| struct inv_icm42600_fifo_2sensors_packet { |
| uint8_t header; |
| struct inv_icm42600_fifo_sensor_data accel; |
| struct inv_icm42600_fifo_sensor_data gyro; |
| int8_t temp; |
| __be16 timestamp; |
| } __packed; |
| #define INV_ICM42600_FIFO_2SENSORS_PACKET_SIZE 16 |
| |
| ssize_t inv_icm42600_fifo_decode_packet(const void *packet, const void **accel, |
| const void **gyro, const int8_t **temp, |
| const void **timestamp, unsigned int *odr) |
| { |
| const struct inv_icm42600_fifo_1sensor_packet *pack1 = packet; |
| const struct inv_icm42600_fifo_2sensors_packet *pack2 = packet; |
| uint8_t header = *((const uint8_t *)packet); |
| |
| /* FIFO empty */ |
| if (header & INV_ICM42600_FIFO_HEADER_MSG) { |
| *accel = NULL; |
| *gyro = NULL; |
| *temp = NULL; |
| *timestamp = NULL; |
| *odr = 0; |
| return 0; |
| } |
| |
| /* handle odr flags */ |
| *odr = 0; |
| if (header & INV_ICM42600_FIFO_HEADER_ODR_GYRO) |
| *odr |= INV_ICM42600_SENSOR_GYRO; |
| if (header & INV_ICM42600_FIFO_HEADER_ODR_ACCEL) |
| *odr |= INV_ICM42600_SENSOR_ACCEL; |
| |
| /* accel + gyro */ |
| if ((header & INV_ICM42600_FIFO_HEADER_ACCEL) && |
| (header & INV_ICM42600_FIFO_HEADER_GYRO)) { |
| *accel = &pack2->accel; |
| *gyro = &pack2->gyro; |
| *temp = &pack2->temp; |
| *timestamp = &pack2->timestamp; |
| return INV_ICM42600_FIFO_2SENSORS_PACKET_SIZE; |
| } |
| |
| /* accel only */ |
| if (header & INV_ICM42600_FIFO_HEADER_ACCEL) { |
| *accel = &pack1->data; |
| *gyro = NULL; |
| *temp = &pack1->temp; |
| *timestamp = NULL; |
| return INV_ICM42600_FIFO_1SENSOR_PACKET_SIZE; |
| } |
| |
| /* gyro only */ |
| if (header & INV_ICM42600_FIFO_HEADER_GYRO) { |
| *accel = NULL; |
| *gyro = &pack1->data; |
| *temp = &pack1->temp; |
| *timestamp = NULL; |
| return INV_ICM42600_FIFO_1SENSOR_PACKET_SIZE; |
| } |
| |
| /* invalid packet if here */ |
| return -EINVAL; |
| } |
| |
| void inv_icm42600_buffer_update_fifo_period(struct inv_icm42600_state *st) |
| { |
| uint32_t period_gyro, period_accel, period; |
| |
| if (st->fifo.en & INV_ICM42600_SENSOR_GYRO) |
| period_gyro = inv_icm42600_odr_to_period(st->conf.gyro.odr); |
| else |
| period_gyro = U32_MAX; |
| |
| if (st->fifo.en & INV_ICM42600_SENSOR_ACCEL) |
| period_accel = inv_icm42600_odr_to_period(st->conf.accel.odr); |
| else |
| period_accel = U32_MAX; |
| |
| if (period_gyro <= period_accel) |
| period = period_gyro; |
| else |
| period = period_accel; |
| |
| st->fifo.period = period; |
| } |
| |
| int inv_icm42600_buffer_set_fifo_en(struct inv_icm42600_state *st, |
| unsigned int fifo_en) |
| { |
| unsigned int mask, val; |
| int ret; |
| |
| /* update only FIFO EN bits */ |
| mask = INV_ICM42600_FIFO_CONFIG1_TMST_FSYNC_EN | |
| INV_ICM42600_FIFO_CONFIG1_TEMP_EN | |
| INV_ICM42600_FIFO_CONFIG1_GYRO_EN | |
| INV_ICM42600_FIFO_CONFIG1_ACCEL_EN; |
| |
| val = 0; |
| if (fifo_en & INV_ICM42600_SENSOR_GYRO) |
| val |= INV_ICM42600_FIFO_CONFIG1_GYRO_EN; |
| if (fifo_en & INV_ICM42600_SENSOR_ACCEL) |
| val |= INV_ICM42600_FIFO_CONFIG1_ACCEL_EN; |
| if (fifo_en & INV_ICM42600_SENSOR_TEMP) |
| val |= INV_ICM42600_FIFO_CONFIG1_TEMP_EN; |
| |
| ret = regmap_update_bits(st->map, INV_ICM42600_REG_FIFO_CONFIG1, mask, val); |
| if (ret) |
| return ret; |
| |
| st->fifo.en = fifo_en; |
| inv_icm42600_buffer_update_fifo_period(st); |
| |
| return 0; |
| } |
| |
| static size_t inv_icm42600_get_packet_size(unsigned int fifo_en) |
| { |
| size_t packet_size; |
| |
| if ((fifo_en & INV_ICM42600_SENSOR_GYRO) && |
| (fifo_en & INV_ICM42600_SENSOR_ACCEL)) |
| packet_size = INV_ICM42600_FIFO_2SENSORS_PACKET_SIZE; |
| else |
| packet_size = INV_ICM42600_FIFO_1SENSOR_PACKET_SIZE; |
| |
| return packet_size; |
| } |
| |
| static unsigned int inv_icm42600_wm_truncate(unsigned int watermark, |
| size_t packet_size) |
| { |
| size_t wm_size; |
| unsigned int wm; |
| |
| wm_size = watermark * packet_size; |
| if (wm_size > INV_ICM42600_FIFO_WATERMARK_MAX) |
| wm_size = INV_ICM42600_FIFO_WATERMARK_MAX; |
| |
| wm = wm_size / packet_size; |
| |
| return wm; |
| } |
| |
| /** |
| * inv_icm42600_buffer_update_watermark - update watermark FIFO threshold |
| * @st: driver internal state |
| * |
| * Returns 0 on success, a negative error code otherwise. |
| * |
| * FIFO watermark threshold is computed based on the required watermark values |
| * set for gyro and accel sensors. Since watermark is all about acceptable data |
| * latency, use the smallest setting between the 2. It means choosing the |
| * smallest latency but this is not as simple as choosing the smallest watermark |
| * value. Latency depends on watermark and ODR. It requires several steps: |
| * 1) compute gyro and accel latencies and choose the smallest value. |
| * 2) adapt the choosen latency so that it is a multiple of both gyro and accel |
| * ones. Otherwise it is possible that you don't meet a requirement. (for |
| * example with gyro @100Hz wm 4 and accel @100Hz with wm 6, choosing the |
| * value of 4 will not meet accel latency requirement because 6 is not a |
| * multiple of 4. You need to use the value 2.) |
| * 3) Since all periods are multiple of each others, watermark is computed by |
| * dividing this computed latency by the smallest period, which corresponds |
| * to the FIFO frequency. Beware that this is only true because we are not |
| * using 500Hz frequency which is not a multiple of the others. |
| */ |
| int inv_icm42600_buffer_update_watermark(struct inv_icm42600_state *st) |
| { |
| size_t packet_size, wm_size; |
| unsigned int wm_gyro, wm_accel, watermark; |
| uint32_t period_gyro, period_accel, period; |
| uint32_t latency_gyro, latency_accel, latency; |
| bool restore; |
| __le16 raw_wm; |
| int ret; |
| |
| packet_size = inv_icm42600_get_packet_size(st->fifo.en); |
| |
| /* compute sensors latency, depending on sensor watermark and odr */ |
| wm_gyro = inv_icm42600_wm_truncate(st->fifo.watermark.gyro, packet_size); |
| wm_accel = inv_icm42600_wm_truncate(st->fifo.watermark.accel, packet_size); |
| /* use us for odr to avoid overflow using 32 bits values */ |
| period_gyro = inv_icm42600_odr_to_period(st->conf.gyro.odr) / 1000UL; |
| period_accel = inv_icm42600_odr_to_period(st->conf.accel.odr) / 1000UL; |
| latency_gyro = period_gyro * wm_gyro; |
| latency_accel = period_accel * wm_accel; |
| |
| /* 0 value for watermark means that the sensor is turned off */ |
| if (latency_gyro == 0) { |
| watermark = wm_accel; |
| } else if (latency_accel == 0) { |
| watermark = wm_gyro; |
| } else { |
| /* compute the smallest latency that is a multiple of both */ |
| if (latency_gyro <= latency_accel) |
| latency = latency_gyro - (latency_accel % latency_gyro); |
| else |
| latency = latency_accel - (latency_gyro % latency_accel); |
| /* use the shortest period */ |
| if (period_gyro <= period_accel) |
| period = period_gyro; |
| else |
| period = period_accel; |
| /* all this works because periods are multiple of each others */ |
| watermark = latency / period; |
| if (watermark < 1) |
| watermark = 1; |
| } |
| |
| /* compute watermark value in bytes */ |
| wm_size = watermark * packet_size; |
| |
| /* changing FIFO watermark requires to turn off watermark interrupt */ |
| ret = regmap_update_bits_check(st->map, INV_ICM42600_REG_INT_SOURCE0, |
| INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN, |
| 0, &restore); |
| if (ret) |
| return ret; |
| |
| raw_wm = INV_ICM42600_FIFO_WATERMARK_VAL(wm_size); |
| memcpy(st->buffer, &raw_wm, sizeof(raw_wm)); |
| ret = regmap_bulk_write(st->map, INV_ICM42600_REG_FIFO_WATERMARK, |
| st->buffer, sizeof(raw_wm)); |
| if (ret) |
| return ret; |
| |
| /* restore watermark interrupt */ |
| if (restore) { |
| ret = regmap_update_bits(st->map, INV_ICM42600_REG_INT_SOURCE0, |
| INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN, |
| INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int inv_icm42600_buffer_preenable(struct iio_dev *indio_dev) |
| { |
| struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev); |
| struct device *dev = regmap_get_device(st->map); |
| |
| pm_runtime_get_sync(dev); |
| |
| return 0; |
| } |
| |
| /* |
| * update_scan_mode callback is turning sensors on and setting data FIFO enable |
| * bits. |
| */ |
| static int inv_icm42600_buffer_postenable(struct iio_dev *indio_dev) |
| { |
| struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev); |
| int ret; |
| |
| mutex_lock(&st->lock); |
| |
| /* exit if FIFO is already on */ |
| if (st->fifo.on) { |
| ret = 0; |
| goto out_on; |
| } |
| |
| /* set FIFO threshold interrupt */ |
| ret = regmap_update_bits(st->map, INV_ICM42600_REG_INT_SOURCE0, |
| INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN, |
| INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN); |
| if (ret) |
| goto out_unlock; |
| |
| /* flush FIFO data */ |
| ret = regmap_write(st->map, INV_ICM42600_REG_SIGNAL_PATH_RESET, |
| INV_ICM42600_SIGNAL_PATH_RESET_FIFO_FLUSH); |
| if (ret) |
| goto out_unlock; |
| |
| /* set FIFO in streaming mode */ |
| ret = regmap_write(st->map, INV_ICM42600_REG_FIFO_CONFIG, |
| INV_ICM42600_FIFO_CONFIG_STREAM); |
| if (ret) |
| goto out_unlock; |
| |
| /* workaround: first read of FIFO count after reset is always 0 */ |
| ret = regmap_bulk_read(st->map, INV_ICM42600_REG_FIFO_COUNT, st->buffer, 2); |
| if (ret) |
| goto out_unlock; |
| |
| out_on: |
| /* increase FIFO on counter */ |
| st->fifo.on++; |
| out_unlock: |
| mutex_unlock(&st->lock); |
| return ret; |
| } |
| |
| static int inv_icm42600_buffer_predisable(struct iio_dev *indio_dev) |
| { |
| struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev); |
| int ret; |
| |
| mutex_lock(&st->lock); |
| |
| /* exit if there are several sensors using the FIFO */ |
| if (st->fifo.on > 1) { |
| ret = 0; |
| goto out_off; |
| } |
| |
| /* set FIFO in bypass mode */ |
| ret = regmap_write(st->map, INV_ICM42600_REG_FIFO_CONFIG, |
| INV_ICM42600_FIFO_CONFIG_BYPASS); |
| if (ret) |
| goto out_unlock; |
| |
| /* flush FIFO data */ |
| ret = regmap_write(st->map, INV_ICM42600_REG_SIGNAL_PATH_RESET, |
| INV_ICM42600_SIGNAL_PATH_RESET_FIFO_FLUSH); |
| if (ret) |
| goto out_unlock; |
| |
| /* disable FIFO threshold interrupt */ |
| ret = regmap_update_bits(st->map, INV_ICM42600_REG_INT_SOURCE0, |
| INV_ICM42600_INT_SOURCE0_FIFO_THS_INT1_EN, 0); |
| if (ret) |
| goto out_unlock; |
| |
| out_off: |
| /* decrease FIFO on counter */ |
| st->fifo.on--; |
| out_unlock: |
| mutex_unlock(&st->lock); |
| return ret; |
| } |
| |
| static int inv_icm42600_buffer_postdisable(struct iio_dev *indio_dev) |
| { |
| struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev); |
| struct device *dev = regmap_get_device(st->map); |
| unsigned int sensor; |
| unsigned int *watermark; |
| struct inv_icm42600_timestamp *ts; |
| struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT; |
| unsigned int sleep_temp = 0; |
| unsigned int sleep_sensor = 0; |
| unsigned int sleep; |
| int ret; |
| |
| if (indio_dev == st->indio_gyro) { |
| sensor = INV_ICM42600_SENSOR_GYRO; |
| watermark = &st->fifo.watermark.gyro; |
| ts = iio_priv(st->indio_gyro); |
| } else if (indio_dev == st->indio_accel) { |
| sensor = INV_ICM42600_SENSOR_ACCEL; |
| watermark = &st->fifo.watermark.accel; |
| ts = iio_priv(st->indio_accel); |
| } else { |
| return -EINVAL; |
| } |
| |
| mutex_lock(&st->lock); |
| |
| ret = inv_icm42600_buffer_set_fifo_en(st, st->fifo.en & ~sensor); |
| if (ret) |
| goto out_unlock; |
| |
| *watermark = 0; |
| ret = inv_icm42600_buffer_update_watermark(st); |
| if (ret) |
| goto out_unlock; |
| |
| conf.mode = INV_ICM42600_SENSOR_MODE_OFF; |
| if (sensor == INV_ICM42600_SENSOR_GYRO) |
| ret = inv_icm42600_set_gyro_conf(st, &conf, &sleep_sensor); |
| else |
| ret = inv_icm42600_set_accel_conf(st, &conf, &sleep_sensor); |
| if (ret) |
| goto out_unlock; |
| |
| /* if FIFO is off, turn temperature off */ |
| if (!st->fifo.on) |
| ret = inv_icm42600_set_temp_conf(st, false, &sleep_temp); |
| |
| inv_icm42600_timestamp_reset(ts); |
| |
| out_unlock: |
| mutex_unlock(&st->lock); |
| |
| /* sleep maximum required time */ |
| if (sleep_sensor > sleep_temp) |
| sleep = sleep_sensor; |
| else |
| sleep = sleep_temp; |
| if (sleep) |
| msleep(sleep); |
| |
| pm_runtime_mark_last_busy(dev); |
| pm_runtime_put_autosuspend(dev); |
| |
| return ret; |
| } |
| |
| const struct iio_buffer_setup_ops inv_icm42600_buffer_ops = { |
| .preenable = inv_icm42600_buffer_preenable, |
| .postenable = inv_icm42600_buffer_postenable, |
| .predisable = inv_icm42600_buffer_predisable, |
| .postdisable = inv_icm42600_buffer_postdisable, |
| }; |
| |
| int inv_icm42600_buffer_fifo_read(struct inv_icm42600_state *st, |
| unsigned int max) |
| { |
| size_t max_count; |
| __be16 *raw_fifo_count; |
| ssize_t i, size; |
| const void *accel, *gyro, *timestamp; |
| const int8_t *temp; |
| unsigned int odr; |
| int ret; |
| |
| /* reset all samples counters */ |
| st->fifo.count = 0; |
| st->fifo.nb.gyro = 0; |
| st->fifo.nb.accel = 0; |
| st->fifo.nb.total = 0; |
| |
| /* compute maximum FIFO read size */ |
| if (max == 0) |
| max_count = sizeof(st->fifo.data); |
| else |
| max_count = max * inv_icm42600_get_packet_size(st->fifo.en); |
| |
| /* read FIFO count value */ |
| raw_fifo_count = (__be16 *)st->buffer; |
| ret = regmap_bulk_read(st->map, INV_ICM42600_REG_FIFO_COUNT, |
| raw_fifo_count, sizeof(*raw_fifo_count)); |
| if (ret) |
| return ret; |
| st->fifo.count = be16_to_cpup(raw_fifo_count); |
| |
| /* check and clamp FIFO count value */ |
| if (st->fifo.count == 0) |
| return 0; |
| if (st->fifo.count > max_count) |
| st->fifo.count = max_count; |
| |
| /* read all FIFO data in internal buffer */ |
| ret = regmap_noinc_read(st->map, INV_ICM42600_REG_FIFO_DATA, |
| st->fifo.data, st->fifo.count); |
| if (ret) |
| return ret; |
| |
| /* compute number of samples for each sensor */ |
| for (i = 0; i < st->fifo.count; i += size) { |
| size = inv_icm42600_fifo_decode_packet(&st->fifo.data[i], |
| &accel, &gyro, &temp, ×tamp, &odr); |
| if (size <= 0) |
| break; |
| if (gyro != NULL && inv_icm42600_fifo_is_data_valid(gyro)) |
| st->fifo.nb.gyro++; |
| if (accel != NULL && inv_icm42600_fifo_is_data_valid(accel)) |
| st->fifo.nb.accel++; |
| st->fifo.nb.total++; |
| } |
| |
| return 0; |
| } |
| |
| int inv_icm42600_buffer_fifo_parse(struct inv_icm42600_state *st) |
| { |
| struct inv_icm42600_timestamp *ts; |
| int ret; |
| |
| if (st->fifo.nb.total == 0) |
| return 0; |
| |
| /* handle gyroscope timestamp and FIFO data parsing */ |
| ts = iio_priv(st->indio_gyro); |
| inv_icm42600_timestamp_interrupt(ts, st->fifo.period, st->fifo.nb.total, |
| st->fifo.nb.gyro, st->timestamp.gyro); |
| if (st->fifo.nb.gyro > 0) { |
| ret = inv_icm42600_gyro_parse_fifo(st->indio_gyro); |
| if (ret) |
| return ret; |
| } |
| |
| /* handle accelerometer timestamp and FIFO data parsing */ |
| ts = iio_priv(st->indio_accel); |
| inv_icm42600_timestamp_interrupt(ts, st->fifo.period, st->fifo.nb.total, |
| st->fifo.nb.accel, st->timestamp.accel); |
| if (st->fifo.nb.accel > 0) { |
| ret = inv_icm42600_accel_parse_fifo(st->indio_accel); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int inv_icm42600_buffer_hwfifo_flush(struct inv_icm42600_state *st, |
| unsigned int count) |
| { |
| struct inv_icm42600_timestamp *ts; |
| int64_t gyro_ts, accel_ts; |
| int ret; |
| |
| gyro_ts = iio_get_time_ns(st->indio_gyro); |
| accel_ts = iio_get_time_ns(st->indio_accel); |
| |
| ret = inv_icm42600_buffer_fifo_read(st, count); |
| if (ret) |
| return ret; |
| |
| if (st->fifo.nb.total == 0) |
| return 0; |
| |
| if (st->fifo.nb.gyro > 0) { |
| ts = iio_priv(st->indio_gyro); |
| inv_icm42600_timestamp_interrupt(ts, st->fifo.period, |
| st->fifo.nb.total, st->fifo.nb.gyro, |
| gyro_ts); |
| ret = inv_icm42600_gyro_parse_fifo(st->indio_gyro); |
| if (ret) |
| return ret; |
| } |
| |
| if (st->fifo.nb.accel > 0) { |
| ts = iio_priv(st->indio_accel); |
| inv_icm42600_timestamp_interrupt(ts, st->fifo.period, |
| st->fifo.nb.total, st->fifo.nb.accel, |
| accel_ts); |
| ret = inv_icm42600_accel_parse_fifo(st->indio_accel); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int inv_icm42600_buffer_init(struct inv_icm42600_state *st) |
| { |
| unsigned int val; |
| int ret; |
| |
| /* |
| * Default FIFO configuration (bits 7 to 5) |
| * - use invalid value |
| * - FIFO count in bytes |
| * - FIFO count in big endian |
| */ |
| val = INV_ICM42600_INTF_CONFIG0_FIFO_COUNT_ENDIAN; |
| ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG0, |
| GENMASK(7, 5), val); |
| if (ret) |
| return ret; |
| |
| /* |
| * Enable FIFO partial read and continuous watermark interrupt. |
| * Disable all FIFO EN bits. |
| */ |
| val = INV_ICM42600_FIFO_CONFIG1_RESUME_PARTIAL_RD | |
| INV_ICM42600_FIFO_CONFIG1_WM_GT_TH; |
| return regmap_update_bits(st->map, INV_ICM42600_REG_FIFO_CONFIG1, |
| GENMASK(6, 5) | GENMASK(3, 0), val); |
| } |