| /* |
| * Copyright © 2014-2017 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| */ |
| |
| #include <linux/debugfs.h> |
| |
| #include "intel_guc_log.h" |
| #include "i915_drv.h" |
| |
| static void guc_log_capture_logs(struct intel_guc_log *log); |
| |
| /** |
| * DOC: GuC firmware log |
| * |
| * Firmware log is enabled by setting i915.guc_log_level to the positive level. |
| * Log data is printed out via reading debugfs i915_guc_log_dump. Reading from |
| * i915_guc_load_status will print out firmware loading status and scratch |
| * registers value. |
| */ |
| |
| static int guc_action_flush_log_complete(struct intel_guc *guc) |
| { |
| u32 action[] = { |
| INTEL_GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE |
| }; |
| |
| return intel_guc_send(guc, action, ARRAY_SIZE(action)); |
| } |
| |
| static int guc_action_flush_log(struct intel_guc *guc) |
| { |
| u32 action[] = { |
| INTEL_GUC_ACTION_FORCE_LOG_BUFFER_FLUSH, |
| 0 |
| }; |
| |
| return intel_guc_send(guc, action, ARRAY_SIZE(action)); |
| } |
| |
| static int guc_action_control_log(struct intel_guc *guc, bool enable, |
| bool default_logging, u32 verbosity) |
| { |
| u32 action[] = { |
| INTEL_GUC_ACTION_UK_LOG_ENABLE_LOGGING, |
| (enable ? GUC_LOG_CONTROL_LOGGING_ENABLED : 0) | |
| (verbosity << GUC_LOG_CONTROL_VERBOSITY_SHIFT) | |
| (default_logging ? GUC_LOG_CONTROL_DEFAULT_LOGGING : 0) |
| }; |
| |
| GEM_BUG_ON(verbosity > GUC_LOG_VERBOSITY_MAX); |
| |
| return intel_guc_send(guc, action, ARRAY_SIZE(action)); |
| } |
| |
| static inline struct intel_guc *log_to_guc(struct intel_guc_log *log) |
| { |
| return container_of(log, struct intel_guc, log); |
| } |
| |
| static void guc_log_enable_flush_events(struct intel_guc_log *log) |
| { |
| intel_guc_enable_msg(log_to_guc(log), |
| INTEL_GUC_RECV_MSG_FLUSH_LOG_BUFFER | |
| INTEL_GUC_RECV_MSG_CRASH_DUMP_POSTED); |
| } |
| |
| static void guc_log_disable_flush_events(struct intel_guc_log *log) |
| { |
| intel_guc_disable_msg(log_to_guc(log), |
| INTEL_GUC_RECV_MSG_FLUSH_LOG_BUFFER | |
| INTEL_GUC_RECV_MSG_CRASH_DUMP_POSTED); |
| } |
| |
| /* |
| * Sub buffer switch callback. Called whenever relay has to switch to a new |
| * sub buffer, relay stays on the same sub buffer if 0 is returned. |
| */ |
| static int subbuf_start_callback(struct rchan_buf *buf, |
| void *subbuf, |
| void *prev_subbuf, |
| size_t prev_padding) |
| { |
| /* |
| * Use no-overwrite mode by default, where relay will stop accepting |
| * new data if there are no empty sub buffers left. |
| * There is no strict synchronization enforced by relay between Consumer |
| * and Producer. In overwrite mode, there is a possibility of getting |
| * inconsistent/garbled data, the producer could be writing on to the |
| * same sub buffer from which Consumer is reading. This can't be avoided |
| * unless Consumer is fast enough and can always run in tandem with |
| * Producer. |
| */ |
| if (relay_buf_full(buf)) |
| return 0; |
| |
| return 1; |
| } |
| |
| /* |
| * file_create() callback. Creates relay file in debugfs. |
| */ |
| static struct dentry *create_buf_file_callback(const char *filename, |
| struct dentry *parent, |
| umode_t mode, |
| struct rchan_buf *buf, |
| int *is_global) |
| { |
| struct dentry *buf_file; |
| |
| /* |
| * This to enable the use of a single buffer for the relay channel and |
| * correspondingly have a single file exposed to User, through which |
| * it can collect the logs in order without any post-processing. |
| * Need to set 'is_global' even if parent is NULL for early logging. |
| */ |
| *is_global = 1; |
| |
| if (!parent) |
| return NULL; |
| |
| buf_file = debugfs_create_file(filename, mode, |
| parent, buf, &relay_file_operations); |
| return buf_file; |
| } |
| |
| /* |
| * file_remove() default callback. Removes relay file in debugfs. |
| */ |
| static int remove_buf_file_callback(struct dentry *dentry) |
| { |
| debugfs_remove(dentry); |
| return 0; |
| } |
| |
| /* relay channel callbacks */ |
| static struct rchan_callbacks relay_callbacks = { |
| .subbuf_start = subbuf_start_callback, |
| .create_buf_file = create_buf_file_callback, |
| .remove_buf_file = remove_buf_file_callback, |
| }; |
| |
| static void guc_move_to_next_buf(struct intel_guc_log *log) |
| { |
| /* |
| * Make sure the updates made in the sub buffer are visible when |
| * Consumer sees the following update to offset inside the sub buffer. |
| */ |
| smp_wmb(); |
| |
| /* All data has been written, so now move the offset of sub buffer. */ |
| relay_reserve(log->relay.channel, log->vma->obj->base.size); |
| |
| /* Switch to the next sub buffer */ |
| relay_flush(log->relay.channel); |
| } |
| |
| static void *guc_get_write_buffer(struct intel_guc_log *log) |
| { |
| /* |
| * Just get the base address of a new sub buffer and copy data into it |
| * ourselves. NULL will be returned in no-overwrite mode, if all sub |
| * buffers are full. Could have used the relay_write() to indirectly |
| * copy the data, but that would have been bit convoluted, as we need to |
| * write to only certain locations inside a sub buffer which cannot be |
| * done without using relay_reserve() along with relay_write(). So its |
| * better to use relay_reserve() alone. |
| */ |
| return relay_reserve(log->relay.channel, 0); |
| } |
| |
| static bool guc_check_log_buf_overflow(struct intel_guc_log *log, |
| enum guc_log_buffer_type type, |
| unsigned int full_cnt) |
| { |
| unsigned int prev_full_cnt = log->stats[type].sampled_overflow; |
| bool overflow = false; |
| |
| if (full_cnt != prev_full_cnt) { |
| overflow = true; |
| |
| log->stats[type].overflow = full_cnt; |
| log->stats[type].sampled_overflow += full_cnt - prev_full_cnt; |
| |
| if (full_cnt < prev_full_cnt) { |
| /* buffer_full_cnt is a 4 bit counter */ |
| log->stats[type].sampled_overflow += 16; |
| } |
| DRM_ERROR_RATELIMITED("GuC log buffer overflow\n"); |
| } |
| |
| return overflow; |
| } |
| |
| static unsigned int guc_get_log_buffer_size(enum guc_log_buffer_type type) |
| { |
| switch (type) { |
| case GUC_ISR_LOG_BUFFER: |
| return ISR_BUFFER_SIZE; |
| case GUC_DPC_LOG_BUFFER: |
| return DPC_BUFFER_SIZE; |
| case GUC_CRASH_DUMP_LOG_BUFFER: |
| return CRASH_BUFFER_SIZE; |
| default: |
| MISSING_CASE(type); |
| } |
| |
| return 0; |
| } |
| |
| static void guc_read_update_log_buffer(struct intel_guc_log *log) |
| { |
| unsigned int buffer_size, read_offset, write_offset, bytes_to_copy, full_cnt; |
| struct guc_log_buffer_state *log_buf_state, *log_buf_snapshot_state; |
| struct guc_log_buffer_state log_buf_state_local; |
| enum guc_log_buffer_type type; |
| void *src_data, *dst_data; |
| bool new_overflow; |
| |
| mutex_lock(&log->relay.lock); |
| |
| if (WARN_ON(!intel_guc_log_relay_enabled(log))) |
| goto out_unlock; |
| |
| /* Get the pointer to shared GuC log buffer */ |
| log_buf_state = src_data = log->relay.buf_addr; |
| |
| /* Get the pointer to local buffer to store the logs */ |
| log_buf_snapshot_state = dst_data = guc_get_write_buffer(log); |
| |
| if (unlikely(!log_buf_snapshot_state)) { |
| /* |
| * Used rate limited to avoid deluge of messages, logs might be |
| * getting consumed by User at a slow rate. |
| */ |
| DRM_ERROR_RATELIMITED("no sub-buffer to capture logs\n"); |
| log->relay.full_count++; |
| |
| goto out_unlock; |
| } |
| |
| /* Actual logs are present from the 2nd page */ |
| src_data += PAGE_SIZE; |
| dst_data += PAGE_SIZE; |
| |
| for (type = GUC_ISR_LOG_BUFFER; type < GUC_MAX_LOG_BUFFER; type++) { |
| /* |
| * Make a copy of the state structure, inside GuC log buffer |
| * (which is uncached mapped), on the stack to avoid reading |
| * from it multiple times. |
| */ |
| memcpy(&log_buf_state_local, log_buf_state, |
| sizeof(struct guc_log_buffer_state)); |
| buffer_size = guc_get_log_buffer_size(type); |
| read_offset = log_buf_state_local.read_ptr; |
| write_offset = log_buf_state_local.sampled_write_ptr; |
| full_cnt = log_buf_state_local.buffer_full_cnt; |
| |
| /* Bookkeeping stuff */ |
| log->stats[type].flush += log_buf_state_local.flush_to_file; |
| new_overflow = guc_check_log_buf_overflow(log, type, full_cnt); |
| |
| /* Update the state of shared log buffer */ |
| log_buf_state->read_ptr = write_offset; |
| log_buf_state->flush_to_file = 0; |
| log_buf_state++; |
| |
| /* First copy the state structure in snapshot buffer */ |
| memcpy(log_buf_snapshot_state, &log_buf_state_local, |
| sizeof(struct guc_log_buffer_state)); |
| |
| /* |
| * The write pointer could have been updated by GuC firmware, |
| * after sending the flush interrupt to Host, for consistency |
| * set write pointer value to same value of sampled_write_ptr |
| * in the snapshot buffer. |
| */ |
| log_buf_snapshot_state->write_ptr = write_offset; |
| log_buf_snapshot_state++; |
| |
| /* Now copy the actual logs. */ |
| if (unlikely(new_overflow)) { |
| /* copy the whole buffer in case of overflow */ |
| read_offset = 0; |
| write_offset = buffer_size; |
| } else if (unlikely((read_offset > buffer_size) || |
| (write_offset > buffer_size))) { |
| DRM_ERROR("invalid log buffer state\n"); |
| /* copy whole buffer as offsets are unreliable */ |
| read_offset = 0; |
| write_offset = buffer_size; |
| } |
| |
| /* Just copy the newly written data */ |
| if (read_offset > write_offset) { |
| i915_memcpy_from_wc(dst_data, src_data, write_offset); |
| bytes_to_copy = buffer_size - read_offset; |
| } else { |
| bytes_to_copy = write_offset - read_offset; |
| } |
| i915_memcpy_from_wc(dst_data + read_offset, |
| src_data + read_offset, bytes_to_copy); |
| |
| src_data += buffer_size; |
| dst_data += buffer_size; |
| } |
| |
| guc_move_to_next_buf(log); |
| |
| out_unlock: |
| mutex_unlock(&log->relay.lock); |
| } |
| |
| static void capture_logs_work(struct work_struct *work) |
| { |
| struct intel_guc_log *log = |
| container_of(work, struct intel_guc_log, relay.flush_work); |
| |
| guc_log_capture_logs(log); |
| } |
| |
| static int guc_log_map(struct intel_guc_log *log) |
| { |
| struct intel_guc *guc = log_to_guc(log); |
| struct drm_i915_private *dev_priv = guc_to_i915(guc); |
| void *vaddr; |
| int ret; |
| |
| lockdep_assert_held(&log->relay.lock); |
| |
| if (!log->vma) |
| return -ENODEV; |
| |
| mutex_lock(&dev_priv->drm.struct_mutex); |
| ret = i915_gem_object_set_to_wc_domain(log->vma->obj, true); |
| mutex_unlock(&dev_priv->drm.struct_mutex); |
| if (ret) |
| return ret; |
| |
| /* |
| * Create a WC (Uncached for read) vmalloc mapping of log |
| * buffer pages, so that we can directly get the data |
| * (up-to-date) from memory. |
| */ |
| vaddr = i915_gem_object_pin_map(log->vma->obj, I915_MAP_WC); |
| if (IS_ERR(vaddr)) { |
| DRM_ERROR("Couldn't map log buffer pages %d\n", ret); |
| return PTR_ERR(vaddr); |
| } |
| |
| log->relay.buf_addr = vaddr; |
| |
| return 0; |
| } |
| |
| static void guc_log_unmap(struct intel_guc_log *log) |
| { |
| lockdep_assert_held(&log->relay.lock); |
| |
| i915_gem_object_unpin_map(log->vma->obj); |
| log->relay.buf_addr = NULL; |
| } |
| |
| void intel_guc_log_init_early(struct intel_guc_log *log) |
| { |
| mutex_init(&log->relay.lock); |
| INIT_WORK(&log->relay.flush_work, capture_logs_work); |
| } |
| |
| static int guc_log_relay_create(struct intel_guc_log *log) |
| { |
| struct intel_guc *guc = log_to_guc(log); |
| struct drm_i915_private *dev_priv = guc_to_i915(guc); |
| struct rchan *guc_log_relay_chan; |
| size_t n_subbufs, subbuf_size; |
| int ret; |
| |
| lockdep_assert_held(&log->relay.lock); |
| |
| /* Keep the size of sub buffers same as shared log buffer */ |
| subbuf_size = log->vma->size; |
| |
| /* |
| * Store up to 8 snapshots, which is large enough to buffer sufficient |
| * boot time logs and provides enough leeway to User, in terms of |
| * latency, for consuming the logs from relay. Also doesn't take |
| * up too much memory. |
| */ |
| n_subbufs = 8; |
| |
| guc_log_relay_chan = relay_open("guc_log", |
| dev_priv->drm.primary->debugfs_root, |
| subbuf_size, n_subbufs, |
| &relay_callbacks, dev_priv); |
| if (!guc_log_relay_chan) { |
| DRM_ERROR("Couldn't create relay chan for GuC logging\n"); |
| |
| ret = -ENOMEM; |
| return ret; |
| } |
| |
| GEM_BUG_ON(guc_log_relay_chan->subbuf_size < subbuf_size); |
| log->relay.channel = guc_log_relay_chan; |
| |
| return 0; |
| } |
| |
| static void guc_log_relay_destroy(struct intel_guc_log *log) |
| { |
| lockdep_assert_held(&log->relay.lock); |
| |
| relay_close(log->relay.channel); |
| log->relay.channel = NULL; |
| } |
| |
| static void guc_log_capture_logs(struct intel_guc_log *log) |
| { |
| struct intel_guc *guc = log_to_guc(log); |
| struct drm_i915_private *dev_priv = guc_to_i915(guc); |
| |
| guc_read_update_log_buffer(log); |
| |
| /* |
| * Generally device is expected to be active only at this |
| * time, so get/put should be really quick. |
| */ |
| intel_runtime_pm_get(dev_priv); |
| guc_action_flush_log_complete(guc); |
| intel_runtime_pm_put(dev_priv); |
| } |
| |
| int intel_guc_log_create(struct intel_guc_log *log) |
| { |
| struct intel_guc *guc = log_to_guc(log); |
| struct i915_vma *vma; |
| u32 guc_log_size; |
| int ret; |
| |
| GEM_BUG_ON(log->vma); |
| |
| /* |
| * GuC Log buffer Layout |
| * |
| * +===============================+ 00B |
| * | Crash dump state header | |
| * +-------------------------------+ 32B |
| * | DPC state header | |
| * +-------------------------------+ 64B |
| * | ISR state header | |
| * +-------------------------------+ 96B |
| * | | |
| * +===============================+ PAGE_SIZE (4KB) |
| * | Crash Dump logs | |
| * +===============================+ + CRASH_SIZE |
| * | DPC logs | |
| * +===============================+ + DPC_SIZE |
| * | ISR logs | |
| * +===============================+ + ISR_SIZE |
| */ |
| guc_log_size = PAGE_SIZE + CRASH_BUFFER_SIZE + DPC_BUFFER_SIZE + |
| ISR_BUFFER_SIZE; |
| |
| vma = intel_guc_allocate_vma(guc, guc_log_size); |
| if (IS_ERR(vma)) { |
| ret = PTR_ERR(vma); |
| goto err; |
| } |
| |
| log->vma = vma; |
| |
| log->level = i915_modparams.guc_log_level; |
| |
| return 0; |
| |
| err: |
| DRM_ERROR("Failed to allocate GuC log buffer. %d\n", ret); |
| return ret; |
| } |
| |
| void intel_guc_log_destroy(struct intel_guc_log *log) |
| { |
| i915_vma_unpin_and_release(&log->vma, 0); |
| } |
| |
| int intel_guc_log_set_level(struct intel_guc_log *log, u32 level) |
| { |
| struct intel_guc *guc = log_to_guc(log); |
| struct drm_i915_private *dev_priv = guc_to_i915(guc); |
| int ret; |
| |
| BUILD_BUG_ON(GUC_LOG_VERBOSITY_MIN != 0); |
| GEM_BUG_ON(!log->vma); |
| |
| /* |
| * GuC is recognizing log levels starting from 0 to max, we're using 0 |
| * as indication that logging should be disabled. |
| */ |
| if (level < GUC_LOG_LEVEL_DISABLED || level > GUC_LOG_LEVEL_MAX) |
| return -EINVAL; |
| |
| mutex_lock(&dev_priv->drm.struct_mutex); |
| |
| if (log->level == level) { |
| ret = 0; |
| goto out_unlock; |
| } |
| |
| intel_runtime_pm_get(dev_priv); |
| ret = guc_action_control_log(guc, GUC_LOG_LEVEL_IS_VERBOSE(level), |
| GUC_LOG_LEVEL_IS_ENABLED(level), |
| GUC_LOG_LEVEL_TO_VERBOSITY(level)); |
| intel_runtime_pm_put(dev_priv); |
| if (ret) { |
| DRM_DEBUG_DRIVER("guc_log_control action failed %d\n", ret); |
| goto out_unlock; |
| } |
| |
| log->level = level; |
| |
| out_unlock: |
| mutex_unlock(&dev_priv->drm.struct_mutex); |
| |
| return ret; |
| } |
| |
| bool intel_guc_log_relay_enabled(const struct intel_guc_log *log) |
| { |
| return log->relay.buf_addr; |
| } |
| |
| int intel_guc_log_relay_open(struct intel_guc_log *log) |
| { |
| int ret; |
| |
| mutex_lock(&log->relay.lock); |
| |
| if (intel_guc_log_relay_enabled(log)) { |
| ret = -EEXIST; |
| goto out_unlock; |
| } |
| |
| /* |
| * We require SSE 4.1 for fast reads from the GuC log buffer and |
| * it should be present on the chipsets supporting GuC based |
| * submisssions. |
| */ |
| if (!i915_has_memcpy_from_wc()) { |
| ret = -ENXIO; |
| goto out_unlock; |
| } |
| |
| ret = guc_log_relay_create(log); |
| if (ret) |
| goto out_unlock; |
| |
| ret = guc_log_map(log); |
| if (ret) |
| goto out_relay; |
| |
| mutex_unlock(&log->relay.lock); |
| |
| guc_log_enable_flush_events(log); |
| |
| /* |
| * When GuC is logging without us relaying to userspace, we're ignoring |
| * the flush notification. This means that we need to unconditionally |
| * flush on relay enabling, since GuC only notifies us once. |
| */ |
| queue_work(log->relay.flush_wq, &log->relay.flush_work); |
| |
| return 0; |
| |
| out_relay: |
| guc_log_relay_destroy(log); |
| out_unlock: |
| mutex_unlock(&log->relay.lock); |
| |
| return ret; |
| } |
| |
| void intel_guc_log_relay_flush(struct intel_guc_log *log) |
| { |
| struct intel_guc *guc = log_to_guc(log); |
| struct drm_i915_private *i915 = guc_to_i915(guc); |
| |
| /* |
| * Before initiating the forceful flush, wait for any pending/ongoing |
| * flush to complete otherwise forceful flush may not actually happen. |
| */ |
| flush_work(&log->relay.flush_work); |
| |
| intel_runtime_pm_get(i915); |
| guc_action_flush_log(guc); |
| intel_runtime_pm_put(i915); |
| |
| /* GuC would have updated log buffer by now, so capture it */ |
| guc_log_capture_logs(log); |
| } |
| |
| void intel_guc_log_relay_close(struct intel_guc_log *log) |
| { |
| guc_log_disable_flush_events(log); |
| flush_work(&log->relay.flush_work); |
| |
| mutex_lock(&log->relay.lock); |
| GEM_BUG_ON(!intel_guc_log_relay_enabled(log)); |
| guc_log_unmap(log); |
| guc_log_relay_destroy(log); |
| mutex_unlock(&log->relay.lock); |
| } |
| |
| void intel_guc_log_handle_flush_event(struct intel_guc_log *log) |
| { |
| queue_work(log->relay.flush_wq, &log->relay.flush_work); |
| } |