| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2016 Imagination Technologies |
| * Author: Paul Burton <paul.burton@mips.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clocksource.h> |
| #include <linux/init.h> |
| #include <linux/irqchip.h> |
| #include <linux/of_clk.h> |
| #include <linux/of_fdt.h> |
| |
| #include <asm/bootinfo.h> |
| #include <asm/fw/fw.h> |
| #include <asm/irq_cpu.h> |
| #include <asm/machine.h> |
| #include <asm/mips-cps.h> |
| #include <asm/prom.h> |
| #include <asm/smp-ops.h> |
| #include <asm/time.h> |
| |
| static __initconst const void *fdt; |
| static __initconst const struct mips_machine *mach; |
| static __initconst const void *mach_match_data; |
| |
| void __init prom_init(void) |
| { |
| plat_get_fdt(); |
| BUG_ON(!fdt); |
| } |
| |
| void __init *plat_get_fdt(void) |
| { |
| const struct mips_machine *check_mach; |
| const struct of_device_id *match; |
| |
| if (fdt) |
| /* Already set up */ |
| return (void *)fdt; |
| |
| if (fw_passed_dtb && !fdt_check_header((void *)fw_passed_dtb)) { |
| /* |
| * We have been provided with the appropriate device tree for |
| * the board. Make use of it & search for any machine struct |
| * based upon the root compatible string. |
| */ |
| fdt = (void *)fw_passed_dtb; |
| |
| for_each_mips_machine(check_mach) { |
| match = mips_machine_is_compatible(check_mach, fdt); |
| if (match) { |
| mach = check_mach; |
| mach_match_data = match->data; |
| break; |
| } |
| } |
| } else if (IS_ENABLED(CONFIG_LEGACY_BOARDS)) { |
| /* |
| * We weren't booted using the UHI boot protocol, but do |
| * support some number of boards with legacy boot protocols. |
| * Attempt to find the right one. |
| */ |
| for_each_mips_machine(check_mach) { |
| if (!check_mach->detect) |
| continue; |
| |
| if (!check_mach->detect()) |
| continue; |
| |
| mach = check_mach; |
| } |
| |
| /* |
| * If we don't recognise the machine then we can't continue, so |
| * die here. |
| */ |
| BUG_ON(!mach); |
| |
| /* Retrieve the machine's FDT */ |
| fdt = mach->fdt; |
| } |
| return (void *)fdt; |
| } |
| |
| #ifdef CONFIG_RELOCATABLE |
| |
| void __init plat_fdt_relocated(void *new_location) |
| { |
| /* |
| * reset fdt as the cached value would point to the location |
| * before relocations happened and update the location argument |
| * if it was passed using UHI |
| */ |
| fdt = NULL; |
| |
| if (fw_arg0 == -2) |
| fw_arg1 = (unsigned long)new_location; |
| } |
| |
| #endif /* CONFIG_RELOCATABLE */ |
| |
| void __init plat_mem_setup(void) |
| { |
| if (mach && mach->fixup_fdt) |
| fdt = mach->fixup_fdt(fdt, mach_match_data); |
| |
| fw_init_cmdline(); |
| __dt_setup_arch((void *)fdt); |
| } |
| |
| void __init device_tree_init(void) |
| { |
| int err; |
| |
| unflatten_and_copy_device_tree(); |
| mips_cpc_probe(); |
| |
| err = register_cps_smp_ops(); |
| if (err) |
| err = register_up_smp_ops(); |
| } |
| |
| int __init apply_mips_fdt_fixups(void *fdt_out, size_t fdt_out_size, |
| const void *fdt_in, |
| const struct mips_fdt_fixup *fixups) |
| { |
| int err; |
| |
| err = fdt_open_into(fdt_in, fdt_out, fdt_out_size); |
| if (err) { |
| pr_err("Failed to open FDT\n"); |
| return err; |
| } |
| |
| for (; fixups->apply; fixups++) { |
| err = fixups->apply(fdt_out); |
| if (err) { |
| pr_err("Failed to apply FDT fixup \"%s\"\n", |
| fixups->description); |
| return err; |
| } |
| } |
| |
| err = fdt_pack(fdt_out); |
| if (err) |
| pr_err("Failed to pack FDT\n"); |
| return err; |
| } |
| |
| void __init plat_time_init(void) |
| { |
| struct device_node *np; |
| struct clk *clk; |
| |
| of_clk_init(NULL); |
| |
| if (!cpu_has_counter) { |
| mips_hpt_frequency = 0; |
| } else if (mach && mach->measure_hpt_freq) { |
| mips_hpt_frequency = mach->measure_hpt_freq(); |
| } else { |
| np = of_get_cpu_node(0, NULL); |
| if (!np) { |
| pr_err("Failed to get CPU node\n"); |
| return; |
| } |
| |
| clk = of_clk_get(np, 0); |
| if (IS_ERR(clk)) { |
| pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk)); |
| return; |
| } |
| |
| mips_hpt_frequency = clk_get_rate(clk); |
| clk_put(clk); |
| |
| switch (boot_cpu_type()) { |
| case CPU_20KC: |
| case CPU_25KF: |
| /* The counter runs at the CPU clock rate */ |
| break; |
| default: |
| /* The counter runs at half the CPU clock rate */ |
| mips_hpt_frequency /= 2; |
| break; |
| } |
| } |
| |
| timer_probe(); |
| } |
| |
| void __init arch_init_irq(void) |
| { |
| struct device_node *intc_node; |
| |
| intc_node = of_find_compatible_node(NULL, NULL, |
| "mti,cpu-interrupt-controller"); |
| if (!cpu_has_veic && !intc_node) |
| mips_cpu_irq_init(); |
| of_node_put(intc_node); |
| |
| irqchip_init(); |
| } |
| |
| void __init prom_free_prom_memory(void) |
| { |
| } |