| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| */ |
| |
| /* |
| * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors, |
| * the CPU frequency subset and voltage value of each OPP varies |
| * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables |
| * defines the voltage and frequency value based on the msm-id in SMEM |
| * and speedbin blown in the efuse combination. |
| * The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC |
| * to provide the OPP framework with required information. |
| * This is used to determine the voltage and frequency value for each OPP of |
| * operating-points-v2 table when it is parsed by the OPP framework. |
| */ |
| |
| #include <linux/cpu.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/nvmem-consumer.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_domain.h> |
| #include <linux/pm_opp.h> |
| #include <linux/slab.h> |
| #include <linux/soc/qcom/smem.h> |
| |
| #define MSM_ID_SMEM 137 |
| |
| enum _msm_id { |
| MSM8996V3 = 0xF6ul, |
| APQ8096V3 = 0x123ul, |
| MSM8996SG = 0x131ul, |
| APQ8096SG = 0x138ul, |
| }; |
| |
| enum _msm8996_version { |
| MSM8996_V3, |
| MSM8996_SG, |
| NUM_OF_MSM8996_VERSIONS, |
| }; |
| |
| struct qcom_cpufreq_drv; |
| |
| struct qcom_cpufreq_match_data { |
| int (*get_version)(struct device *cpu_dev, |
| struct nvmem_cell *speedbin_nvmem, |
| char **pvs_name, |
| struct qcom_cpufreq_drv *drv); |
| const char **genpd_names; |
| }; |
| |
| struct qcom_cpufreq_drv { |
| struct opp_table **names_opp_tables; |
| struct opp_table **hw_opp_tables; |
| struct opp_table **genpd_opp_tables; |
| u32 versions; |
| const struct qcom_cpufreq_match_data *data; |
| }; |
| |
| static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev; |
| |
| static void get_krait_bin_format_a(struct device *cpu_dev, |
| int *speed, int *pvs, int *pvs_ver, |
| struct nvmem_cell *pvs_nvmem, u8 *buf) |
| { |
| u32 pte_efuse; |
| |
| pte_efuse = *((u32 *)buf); |
| |
| *speed = pte_efuse & 0xf; |
| if (*speed == 0xf) |
| *speed = (pte_efuse >> 4) & 0xf; |
| |
| if (*speed == 0xf) { |
| *speed = 0; |
| dev_warn(cpu_dev, "Speed bin: Defaulting to %d\n", *speed); |
| } else { |
| dev_dbg(cpu_dev, "Speed bin: %d\n", *speed); |
| } |
| |
| *pvs = (pte_efuse >> 10) & 0x7; |
| if (*pvs == 0x7) |
| *pvs = (pte_efuse >> 13) & 0x7; |
| |
| if (*pvs == 0x7) { |
| *pvs = 0; |
| dev_warn(cpu_dev, "PVS bin: Defaulting to %d\n", *pvs); |
| } else { |
| dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs); |
| } |
| } |
| |
| static void get_krait_bin_format_b(struct device *cpu_dev, |
| int *speed, int *pvs, int *pvs_ver, |
| struct nvmem_cell *pvs_nvmem, u8 *buf) |
| { |
| u32 pte_efuse, redundant_sel; |
| |
| pte_efuse = *((u32 *)buf); |
| redundant_sel = (pte_efuse >> 24) & 0x7; |
| |
| *pvs_ver = (pte_efuse >> 4) & 0x3; |
| |
| switch (redundant_sel) { |
| case 1: |
| *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); |
| *speed = (pte_efuse >> 27) & 0xf; |
| break; |
| case 2: |
| *pvs = (pte_efuse >> 27) & 0xf; |
| *speed = pte_efuse & 0x7; |
| break; |
| default: |
| /* 4 bits of PVS are in efuse register bits 31, 8-6. */ |
| *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); |
| *speed = pte_efuse & 0x7; |
| } |
| |
| /* Check SPEED_BIN_BLOW_STATUS */ |
| if (pte_efuse & BIT(3)) { |
| dev_dbg(cpu_dev, "Speed bin: %d\n", *speed); |
| } else { |
| dev_warn(cpu_dev, "Speed bin not set. Defaulting to 0!\n"); |
| *speed = 0; |
| } |
| |
| /* Check PVS_BLOW_STATUS */ |
| pte_efuse = *(((u32 *)buf) + 4); |
| pte_efuse &= BIT(21); |
| if (pte_efuse) { |
| dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs); |
| } else { |
| dev_warn(cpu_dev, "PVS bin not set. Defaulting to 0!\n"); |
| *pvs = 0; |
| } |
| |
| dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver); |
| } |
| |
| static enum _msm8996_version qcom_cpufreq_get_msm_id(void) |
| { |
| size_t len; |
| u32 *msm_id; |
| enum _msm8996_version version; |
| |
| msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len); |
| if (IS_ERR(msm_id)) |
| return NUM_OF_MSM8996_VERSIONS; |
| |
| /* The first 4 bytes are format, next to them is the actual msm-id */ |
| msm_id++; |
| |
| switch ((enum _msm_id)*msm_id) { |
| case MSM8996V3: |
| case APQ8096V3: |
| version = MSM8996_V3; |
| break; |
| case MSM8996SG: |
| case APQ8096SG: |
| version = MSM8996_SG; |
| break; |
| default: |
| version = NUM_OF_MSM8996_VERSIONS; |
| } |
| |
| return version; |
| } |
| |
| static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev, |
| struct nvmem_cell *speedbin_nvmem, |
| char **pvs_name, |
| struct qcom_cpufreq_drv *drv) |
| { |
| size_t len; |
| u8 *speedbin; |
| enum _msm8996_version msm8996_version; |
| *pvs_name = NULL; |
| |
| msm8996_version = qcom_cpufreq_get_msm_id(); |
| if (NUM_OF_MSM8996_VERSIONS == msm8996_version) { |
| dev_err(cpu_dev, "Not Snapdragon 820/821!"); |
| return -ENODEV; |
| } |
| |
| speedbin = nvmem_cell_read(speedbin_nvmem, &len); |
| if (IS_ERR(speedbin)) |
| return PTR_ERR(speedbin); |
| |
| switch (msm8996_version) { |
| case MSM8996_V3: |
| drv->versions = 1 << (unsigned int)(*speedbin); |
| break; |
| case MSM8996_SG: |
| drv->versions = 1 << ((unsigned int)(*speedbin) + 4); |
| break; |
| default: |
| BUG(); |
| break; |
| } |
| |
| kfree(speedbin); |
| return 0; |
| } |
| |
| static int qcom_cpufreq_krait_name_version(struct device *cpu_dev, |
| struct nvmem_cell *speedbin_nvmem, |
| char **pvs_name, |
| struct qcom_cpufreq_drv *drv) |
| { |
| int speed = 0, pvs = 0, pvs_ver = 0; |
| u8 *speedbin; |
| size_t len; |
| |
| speedbin = nvmem_cell_read(speedbin_nvmem, &len); |
| |
| if (IS_ERR(speedbin)) |
| return PTR_ERR(speedbin); |
| |
| switch (len) { |
| case 4: |
| get_krait_bin_format_a(cpu_dev, &speed, &pvs, &pvs_ver, |
| speedbin_nvmem, speedbin); |
| break; |
| case 8: |
| get_krait_bin_format_b(cpu_dev, &speed, &pvs, &pvs_ver, |
| speedbin_nvmem, speedbin); |
| break; |
| default: |
| dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n"); |
| return -ENODEV; |
| } |
| |
| snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d", |
| speed, pvs, pvs_ver); |
| |
| drv->versions = (1 << speed); |
| |
| kfree(speedbin); |
| return 0; |
| } |
| |
| static const struct qcom_cpufreq_match_data match_data_kryo = { |
| .get_version = qcom_cpufreq_kryo_name_version, |
| }; |
| |
| static const struct qcom_cpufreq_match_data match_data_krait = { |
| .get_version = qcom_cpufreq_krait_name_version, |
| }; |
| |
| static const char *qcs404_genpd_names[] = { "cpr", NULL }; |
| |
| static const struct qcom_cpufreq_match_data match_data_qcs404 = { |
| .genpd_names = qcs404_genpd_names, |
| }; |
| |
| static int qcom_cpufreq_probe(struct platform_device *pdev) |
| { |
| struct qcom_cpufreq_drv *drv; |
| struct nvmem_cell *speedbin_nvmem; |
| struct device_node *np; |
| struct device *cpu_dev; |
| char *pvs_name = "speedXX-pvsXX-vXX"; |
| unsigned cpu; |
| const struct of_device_id *match; |
| int ret; |
| |
| cpu_dev = get_cpu_device(0); |
| if (!cpu_dev) |
| return -ENODEV; |
| |
| np = dev_pm_opp_of_get_opp_desc_node(cpu_dev); |
| if (!np) |
| return -ENOENT; |
| |
| ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu"); |
| if (!ret) { |
| of_node_put(np); |
| return -ENOENT; |
| } |
| |
| drv = kzalloc(sizeof(*drv), GFP_KERNEL); |
| if (!drv) |
| return -ENOMEM; |
| |
| match = pdev->dev.platform_data; |
| drv->data = match->data; |
| if (!drv->data) { |
| ret = -ENODEV; |
| goto free_drv; |
| } |
| |
| if (drv->data->get_version) { |
| speedbin_nvmem = of_nvmem_cell_get(np, NULL); |
| if (IS_ERR(speedbin_nvmem)) { |
| if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER) |
| dev_err(cpu_dev, |
| "Could not get nvmem cell: %ld\n", |
| PTR_ERR(speedbin_nvmem)); |
| ret = PTR_ERR(speedbin_nvmem); |
| goto free_drv; |
| } |
| |
| ret = drv->data->get_version(cpu_dev, |
| speedbin_nvmem, &pvs_name, drv); |
| if (ret) { |
| nvmem_cell_put(speedbin_nvmem); |
| goto free_drv; |
| } |
| nvmem_cell_put(speedbin_nvmem); |
| } |
| of_node_put(np); |
| |
| drv->names_opp_tables = kcalloc(num_possible_cpus(), |
| sizeof(*drv->names_opp_tables), |
| GFP_KERNEL); |
| if (!drv->names_opp_tables) { |
| ret = -ENOMEM; |
| goto free_drv; |
| } |
| drv->hw_opp_tables = kcalloc(num_possible_cpus(), |
| sizeof(*drv->hw_opp_tables), |
| GFP_KERNEL); |
| if (!drv->hw_opp_tables) { |
| ret = -ENOMEM; |
| goto free_opp_names; |
| } |
| |
| drv->genpd_opp_tables = kcalloc(num_possible_cpus(), |
| sizeof(*drv->genpd_opp_tables), |
| GFP_KERNEL); |
| if (!drv->genpd_opp_tables) { |
| ret = -ENOMEM; |
| goto free_opp; |
| } |
| |
| for_each_possible_cpu(cpu) { |
| cpu_dev = get_cpu_device(cpu); |
| if (NULL == cpu_dev) { |
| ret = -ENODEV; |
| goto free_genpd_opp; |
| } |
| |
| if (drv->data->get_version) { |
| |
| if (pvs_name) { |
| drv->names_opp_tables[cpu] = dev_pm_opp_set_prop_name( |
| cpu_dev, |
| pvs_name); |
| if (IS_ERR(drv->names_opp_tables[cpu])) { |
| ret = PTR_ERR(drv->names_opp_tables[cpu]); |
| dev_err(cpu_dev, "Failed to add OPP name %s\n", |
| pvs_name); |
| goto free_opp; |
| } |
| } |
| |
| drv->hw_opp_tables[cpu] = dev_pm_opp_set_supported_hw( |
| cpu_dev, &drv->versions, 1); |
| if (IS_ERR(drv->hw_opp_tables[cpu])) { |
| ret = PTR_ERR(drv->hw_opp_tables[cpu]); |
| dev_err(cpu_dev, |
| "Failed to set supported hardware\n"); |
| goto free_genpd_opp; |
| } |
| } |
| |
| if (drv->data->genpd_names) { |
| drv->genpd_opp_tables[cpu] = |
| dev_pm_opp_attach_genpd(cpu_dev, |
| drv->data->genpd_names, |
| NULL); |
| if (IS_ERR(drv->genpd_opp_tables[cpu])) { |
| ret = PTR_ERR(drv->genpd_opp_tables[cpu]); |
| if (ret != -EPROBE_DEFER) |
| dev_err(cpu_dev, |
| "Could not attach to pm_domain: %d\n", |
| ret); |
| goto free_genpd_opp; |
| } |
| } |
| } |
| |
| cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, |
| NULL, 0); |
| if (!IS_ERR(cpufreq_dt_pdev)) { |
| platform_set_drvdata(pdev, drv); |
| return 0; |
| } |
| |
| ret = PTR_ERR(cpufreq_dt_pdev); |
| dev_err(cpu_dev, "Failed to register platform device\n"); |
| |
| free_genpd_opp: |
| for_each_possible_cpu(cpu) { |
| if (IS_ERR_OR_NULL(drv->genpd_opp_tables[cpu])) |
| break; |
| dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]); |
| } |
| kfree(drv->genpd_opp_tables); |
| free_opp: |
| for_each_possible_cpu(cpu) { |
| if (IS_ERR_OR_NULL(drv->names_opp_tables[cpu])) |
| break; |
| dev_pm_opp_put_prop_name(drv->names_opp_tables[cpu]); |
| } |
| for_each_possible_cpu(cpu) { |
| if (IS_ERR_OR_NULL(drv->hw_opp_tables[cpu])) |
| break; |
| dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]); |
| } |
| kfree(drv->hw_opp_tables); |
| free_opp_names: |
| kfree(drv->names_opp_tables); |
| free_drv: |
| kfree(drv); |
| |
| return ret; |
| } |
| |
| static int qcom_cpufreq_remove(struct platform_device *pdev) |
| { |
| struct qcom_cpufreq_drv *drv = platform_get_drvdata(pdev); |
| unsigned int cpu; |
| |
| platform_device_unregister(cpufreq_dt_pdev); |
| |
| for_each_possible_cpu(cpu) { |
| if (drv->names_opp_tables[cpu]) |
| dev_pm_opp_put_supported_hw(drv->names_opp_tables[cpu]); |
| if (drv->hw_opp_tables[cpu]) |
| dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]); |
| if (drv->genpd_opp_tables[cpu]) |
| dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]); |
| } |
| |
| kfree(drv->names_opp_tables); |
| kfree(drv->hw_opp_tables); |
| kfree(drv->genpd_opp_tables); |
| kfree(drv); |
| |
| return 0; |
| } |
| |
| static struct platform_driver qcom_cpufreq_driver = { |
| .probe = qcom_cpufreq_probe, |
| .remove = qcom_cpufreq_remove, |
| .driver = { |
| .name = "qcom-cpufreq-nvmem", |
| }, |
| }; |
| |
| static const struct of_device_id qcom_cpufreq_match_list[] __initconst = { |
| { .compatible = "qcom,apq8096", .data = &match_data_kryo }, |
| { .compatible = "qcom,msm8996", .data = &match_data_kryo }, |
| { .compatible = "qcom,qcs404", .data = &match_data_qcs404 }, |
| { .compatible = "qcom,ipq8064", .data = &match_data_krait }, |
| { .compatible = "qcom,apq8064", .data = &match_data_krait }, |
| { .compatible = "qcom,msm8974", .data = &match_data_krait }, |
| { .compatible = "qcom,msm8960", .data = &match_data_krait }, |
| {}, |
| }; |
| |
| /* |
| * Since the driver depends on smem and nvmem drivers, which may |
| * return EPROBE_DEFER, all the real activity is done in the probe, |
| * which may be defered as well. The init here is only registering |
| * the driver and the platform device. |
| */ |
| static int __init qcom_cpufreq_init(void) |
| { |
| struct device_node *np = of_find_node_by_path("/"); |
| const struct of_device_id *match; |
| int ret; |
| |
| if (!np) |
| return -ENODEV; |
| |
| match = of_match_node(qcom_cpufreq_match_list, np); |
| of_node_put(np); |
| if (!match) |
| return -ENODEV; |
| |
| ret = platform_driver_register(&qcom_cpufreq_driver); |
| if (unlikely(ret < 0)) |
| return ret; |
| |
| cpufreq_pdev = platform_device_register_data(NULL, "qcom-cpufreq-nvmem", |
| -1, match, sizeof(*match)); |
| ret = PTR_ERR_OR_ZERO(cpufreq_pdev); |
| if (0 == ret) |
| return 0; |
| |
| platform_driver_unregister(&qcom_cpufreq_driver); |
| return ret; |
| } |
| module_init(qcom_cpufreq_init); |
| |
| static void __exit qcom_cpufreq_exit(void) |
| { |
| platform_device_unregister(cpufreq_pdev); |
| platform_driver_unregister(&qcom_cpufreq_driver); |
| } |
| module_exit(qcom_cpufreq_exit); |
| |
| MODULE_DESCRIPTION("Qualcomm Technologies, Inc. CPUfreq driver"); |
| MODULE_LICENSE("GPL v2"); |