| # SPDX-License-Identifier: ISC |
| config ATH9K_HW |
| tristate |
| config ATH9K_COMMON |
| tristate |
| select ATH_COMMON |
| config ATH9K_COMMON_DEBUG |
| bool |
| config ATH9K_DFS_DEBUGFS |
| def_bool y |
| depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED |
| |
| config ATH9K_BTCOEX_SUPPORT |
| bool "Atheros bluetooth coexistence support" |
| depends on (ATH9K || ATH9K_HTC) |
| default y |
| help |
| Say Y, if you want to use the ath9k/ath9k_htc radios together with |
| Bluetooth modules in the same system. |
| |
| config ATH9K |
| tristate "Atheros 802.11n wireless cards support" |
| depends on MAC80211 && HAS_DMA |
| select ATH9K_HW |
| select ATH9K_COMMON |
| imply NEW_LEDS |
| imply LEDS_CLASS |
| imply MAC80211_LEDS |
| help |
| This module adds support for wireless adapters based on |
| Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family |
| of chipsets. For a specific list of supported external |
| cards, laptops that already ship with these cards and |
| APs that come with these cards refer to ath9k wiki |
| products page: |
| |
| https://wireless.wiki.kernel.org/en/users/Drivers/ath9k/products |
| |
| If you choose to build a module, it'll be called ath9k. |
| |
| config ATH9K_PCI |
| bool "Atheros ath9k PCI/PCIe bus support" |
| default y |
| depends on ATH9K && PCI |
| help |
| This option enables the PCI bus support in ath9k. |
| |
| Say Y, if you have a compatible PCI/PCIe wireless card. |
| |
| config ATH9K_AHB |
| bool "Atheros ath9k AHB bus support" |
| depends on ATH9K |
| default n |
| help |
| This option enables the AHB bus support in ath9k. |
| |
| Say Y, if you have a SoC with a compatible built-in |
| wireless MAC. Say N if unsure. |
| |
| config ATH9K_DEBUGFS |
| bool "Atheros ath9k debugging" |
| depends on ATH9K && DEBUG_FS |
| select MAC80211_DEBUGFS |
| select ATH9K_COMMON_DEBUG |
| help |
| Say Y, if you need access to ath9k's statistics for |
| interrupts, rate control, etc. |
| |
| Also required for changing debug message flags at run time and for |
| TX99. |
| |
| config ATH9K_STATION_STATISTICS |
| bool "Detailed station statistics" |
| depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS |
| select MAC80211_DEBUGFS |
| default n |
| help |
| This option enables detailed statistics for association stations. |
| |
| config ATH9K_TX99 |
| bool "Atheros ath9k TX99 testing support" |
| depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS |
| default n |
| help |
| Say N. This should only be enabled on systems undergoing |
| certification testing and evaluation in a controlled environment. |
| Enabling this will only enable TX99 support, all other modes of |
| operation will be disabled. |
| |
| TX99 support enables Specific Absorption Rate (SAR) testing. |
| SAR is the unit of measurement for the amount of radio frequency(RF) |
| absorbed by the body when using a wireless device. The RF exposure |
| limits used are expressed in the terms of SAR, which is a measure |
| of the electric and magnetic field strength and power density for |
| transmitters operating at frequencies from 300 kHz to 100 GHz. |
| Regulatory bodies around the world require that wireless device |
| be evaluated to meet the RF exposure limits set forth in the |
| governmental SAR regulations. |
| |
| config ATH9K_DFS_CERTIFIED |
| bool "Atheros DFS support for certified platforms" |
| depends on ATH9K && CFG80211_CERTIFICATION_ONUS |
| default n |
| help |
| This option enables DFS support for initiating radiation on |
| ath9k. There is no way to dynamically detect if a card was DFS |
| certified and as such this is left as a build time option. This |
| option should only be enabled by system integrators that can |
| guarantee that all the platforms that their kernel will run on |
| have obtained appropriate regulatory body certification for a |
| respective Atheros card by using ath9k on the target shipping |
| platforms. |
| |
| This is currently only a placeholder for future DFS support, |
| as DFS support requires more components that still need to be |
| developed. At this point enabling this option won't do anything |
| except increase code size. |
| |
| config ATH9K_DYNACK |
| bool "Atheros ath9k ACK timeout estimation algorithm" |
| depends on ATH9K |
| default n |
| help |
| This option enables ath9k dynamic ACK timeout estimation algorithm |
| based on ACK frame RX timestamp, TX frame timestamp and frame |
| duration |
| |
| config ATH9K_WOW |
| bool "Wake on Wireless LAN support (EXPERIMENTAL)" |
| depends on ATH9K && PM |
| default n |
| help |
| This option enables Wake on Wireless LAN support for certain cards. |
| Currently, AR9462 is supported. |
| |
| config ATH9K_RFKILL |
| bool "Atheros ath9k rfkill support" if EXPERT |
| depends on ATH9K |
| depends on RFKILL=y || RFKILL=ATH9K |
| default y |
| help |
| Say Y to have ath9k poll the RF-Kill GPIO every couple of |
| seconds. Turn off to save power, but enable it if you have |
| a platform that can toggle the RF-Kill GPIO. |
| |
| config ATH9K_CHANNEL_CONTEXT |
| bool "Channel Context support" |
| depends on ATH9K |
| default n |
| help |
| This option enables channel context support in ath9k, which is needed |
| for multi-channel concurrency. Enable this if P2P PowerSave support |
| is required. |
| |
| config ATH9K_PCOEM |
| bool "Atheros ath9k support for PC OEM cards" if EXPERT |
| depends on ATH9K |
| default y |
| |
| config ATH9K_PCI_NO_EEPROM |
| tristate "Atheros ath9k pci loader for EEPROM-less chips" |
| depends on ATH9K_PCI |
| default n |
| help |
| This separate driver provides a loader in order to support the |
| AR500X to AR92XX-generation of ath9k PCI(e) WiFi chips, which have |
| their initialization data (which contains the real PCI Device ID |
| that ath9k will need) stored together with the calibration data out |
| of reach for the ath9k chip. |
| |
| These devices are usually various network appliances, routers or |
| access Points and such. |
| |
| If unsure say N. |
| |
| config ATH9K_HTC |
| tristate "Atheros HTC based wireless cards support" |
| depends on USB && MAC80211 |
| select ATH9K_HW |
| select ATH9K_COMMON |
| imply NEW_LEDS |
| imply LEDS_CLASS |
| imply MAC80211_LEDS |
| help |
| Support for Atheros HTC based cards. |
| Chipsets supported: AR9271 |
| |
| For more information: |
| https://wireless.wiki.kernel.org/en/users/Drivers/ath9k_htc |
| |
| The built module will be ath9k_htc. |
| |
| config ATH9K_HTC_DEBUGFS |
| bool "Atheros ath9k_htc debugging" |
| depends on ATH9K_HTC && DEBUG_FS |
| select ATH9K_COMMON_DEBUG |
| help |
| Say Y, if you need access to ath9k_htc's statistics. |
| As well as access to the FFT/spectral data. |
| |
| config ATH9K_HWRNG |
| bool "Random number generator support" |
| depends on ATH9K && (HW_RANDOM = y || HW_RANDOM = ATH9K) |
| default n |
| help |
| This option incorporates the ADC register output as a source of |
| randomness into Linux entropy pool (/dev/urandom and /dev/random) |
| |
| Say Y, feeds the entropy directly from the WiFi driver to the input |
| pool. |
| |
| config ATH9K_COMMON_SPECTRAL |
| bool "Atheros ath9k/ath9k_htc spectral scan support" |
| depends on ATH9K_DEBUGFS || ATH9K_HTC_DEBUGFS |
| select RELAY |
| default n |
| help |
| Say Y to enable access to the FFT/spectral data via debugfs. |
