| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * RT-Mutexes: simple blocking mutual exclusion locks with PI support |
| * |
| * started by Ingo Molnar and Thomas Gleixner. |
| * |
| * Copyright (C) 2004-2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> |
| * Copyright (C) 2005-2006 Timesys Corp., Thomas Gleixner <tglx@timesys.com> |
| * Copyright (C) 2005 Kihon Technologies Inc., Steven Rostedt |
| * Copyright (C) 2006 Esben Nielsen |
| * Adaptive Spinlocks: |
| * Copyright (C) 2008 Novell, Inc., Gregory Haskins, Sven Dietrich, |
| * and Peter Morreale, |
| * Adaptive Spinlocks simplification: |
| * Copyright (C) 2008 Red Hat, Inc., Steven Rostedt <srostedt@redhat.com> |
| * |
| * See Documentation/locking/rt-mutex-design.rst for details. |
| */ |
| #include <linux/sched.h> |
| #include <linux/sched/debug.h> |
| #include <linux/sched/deadline.h> |
| #include <linux/sched/signal.h> |
| #include <linux/sched/rt.h> |
| #include <linux/sched/wake_q.h> |
| #include <linux/ww_mutex.h> |
| |
| #include <trace/events/lock.h> |
| |
| #include "rtmutex_common.h" |
| |
| #ifndef WW_RT |
| # define build_ww_mutex() (false) |
| # define ww_container_of(rtm) NULL |
| |
| static inline int __ww_mutex_add_waiter(struct rt_mutex_waiter *waiter, |
| struct rt_mutex *lock, |
| struct ww_acquire_ctx *ww_ctx) |
| { |
| return 0; |
| } |
| |
| static inline void __ww_mutex_check_waiters(struct rt_mutex *lock, |
| struct ww_acquire_ctx *ww_ctx) |
| { |
| } |
| |
| static inline void ww_mutex_lock_acquired(struct ww_mutex *lock, |
| struct ww_acquire_ctx *ww_ctx) |
| { |
| } |
| |
| static inline int __ww_mutex_check_kill(struct rt_mutex *lock, |
| struct rt_mutex_waiter *waiter, |
| struct ww_acquire_ctx *ww_ctx) |
| { |
| return 0; |
| } |
| |
| #else |
| # define build_ww_mutex() (true) |
| # define ww_container_of(rtm) container_of(rtm, struct ww_mutex, base) |
| # include "ww_mutex.h" |
| #endif |
| |
| /* |
| * lock->owner state tracking: |
| * |
| * lock->owner holds the task_struct pointer of the owner. Bit 0 |
| * is used to keep track of the "lock has waiters" state. |
| * |
| * owner bit0 |
| * NULL 0 lock is free (fast acquire possible) |
| * NULL 1 lock is free and has waiters and the top waiter |
| * is going to take the lock* |
| * taskpointer 0 lock is held (fast release possible) |
| * taskpointer 1 lock is held and has waiters** |
| * |
| * The fast atomic compare exchange based acquire and release is only |
| * possible when bit 0 of lock->owner is 0. |
| * |
| * (*) It also can be a transitional state when grabbing the lock |
| * with ->wait_lock is held. To prevent any fast path cmpxchg to the lock, |
| * we need to set the bit0 before looking at the lock, and the owner may be |
| * NULL in this small time, hence this can be a transitional state. |
| * |
| * (**) There is a small time when bit 0 is set but there are no |
| * waiters. This can happen when grabbing the lock in the slow path. |
| * To prevent a cmpxchg of the owner releasing the lock, we need to |
| * set this bit before looking at the lock. |
| */ |
| |
| static __always_inline struct task_struct * |
| rt_mutex_owner_encode(struct rt_mutex_base *lock, struct task_struct *owner) |
| { |
| unsigned long val = (unsigned long)owner; |
| |
| if (rt_mutex_has_waiters(lock)) |
| val |= RT_MUTEX_HAS_WAITERS; |
| |
| return (struct task_struct *)val; |
| } |
| |
| static __always_inline void |
| rt_mutex_set_owner(struct rt_mutex_base *lock, struct task_struct *owner) |
| { |
| /* |
| * lock->wait_lock is held but explicit acquire semantics are needed |
| * for a new lock owner so WRITE_ONCE is insufficient. |
| */ |
| xchg_acquire(&lock->owner, rt_mutex_owner_encode(lock, owner)); |
| } |
| |
| static __always_inline void rt_mutex_clear_owner(struct rt_mutex_base *lock) |
| { |
| /* lock->wait_lock is held so the unlock provides release semantics. */ |
| WRITE_ONCE(lock->owner, rt_mutex_owner_encode(lock, NULL)); |
| } |
| |
| static __always_inline void clear_rt_mutex_waiters(struct rt_mutex_base *lock) |
| { |
| lock->owner = (struct task_struct *) |
| ((unsigned long)lock->owner & ~RT_MUTEX_HAS_WAITERS); |
| } |
| |
| static __always_inline void |
| fixup_rt_mutex_waiters(struct rt_mutex_base *lock, bool acquire_lock) |
| { |
| unsigned long owner, *p = (unsigned long *) &lock->owner; |
| |
| if (rt_mutex_has_waiters(lock)) |
| return; |
| |
| /* |
| * The rbtree has no waiters enqueued, now make sure that the |
| * lock->owner still has the waiters bit set, otherwise the |
| * following can happen: |
| * |
| * CPU 0 CPU 1 CPU2 |
| * l->owner=T1 |
| * rt_mutex_lock(l) |
| * lock(l->lock) |
| * l->owner = T1 | HAS_WAITERS; |
| * enqueue(T2) |
| * boost() |
| * unlock(l->lock) |
| * block() |
| * |
| * rt_mutex_lock(l) |
| * lock(l->lock) |
| * l->owner = T1 | HAS_WAITERS; |
| * enqueue(T3) |
| * boost() |
| * unlock(l->lock) |
| * block() |
| * signal(->T2) signal(->T3) |
| * lock(l->lock) |
| * dequeue(T2) |
| * deboost() |
| * unlock(l->lock) |
| * lock(l->lock) |
| * dequeue(T3) |
| * ==> wait list is empty |
| * deboost() |
| * unlock(l->lock) |
| * lock(l->lock) |
| * fixup_rt_mutex_waiters() |
| * if (wait_list_empty(l) { |
| * l->owner = owner |
| * owner = l->owner & ~HAS_WAITERS; |
| * ==> l->owner = T1 |
| * } |
| * lock(l->lock) |
| * rt_mutex_unlock(l) fixup_rt_mutex_waiters() |
| * if (wait_list_empty(l) { |
| * owner = l->owner & ~HAS_WAITERS; |
| * cmpxchg(l->owner, T1, NULL) |
| * ===> Success (l->owner = NULL) |
| * |
| * l->owner = owner |
| * ==> l->owner = T1 |
| * } |
| * |
| * With the check for the waiter bit in place T3 on CPU2 will not |
| * overwrite. All tasks fiddling with the waiters bit are |
| * serialized by l->lock, so nothing else can modify the waiters |
| * bit. If the bit is set then nothing can change l->owner either |
| * so the simple RMW is safe. The cmpxchg() will simply fail if it |
| * happens in the middle of the RMW because the waiters bit is |
| * still set. |
| */ |
| owner = READ_ONCE(*p); |
| if (owner & RT_MUTEX_HAS_WAITERS) { |
| /* |
| * See rt_mutex_set_owner() and rt_mutex_clear_owner() on |
| * why xchg_acquire() is used for updating owner for |
| * locking and WRITE_ONCE() for unlocking. |
| * |
| * WRITE_ONCE() would work for the acquire case too, but |
| * in case that the lock acquisition failed it might |
| * force other lockers into the slow path unnecessarily. |
| */ |
| if (acquire_lock) |
| xchg_acquire(p, owner & ~RT_MUTEX_HAS_WAITERS); |
| else |
| WRITE_ONCE(*p, owner & ~RT_MUTEX_HAS_WAITERS); |
| } |
| } |
| |
| /* |
| * We can speed up the acquire/release, if there's no debugging state to be |
| * set up. |
| */ |
| #ifndef CONFIG_DEBUG_RT_MUTEXES |
| static __always_inline bool rt_mutex_cmpxchg_acquire(struct rt_mutex_base *lock, |
| struct task_struct *old, |
| struct task_struct *new) |
| { |
| return try_cmpxchg_acquire(&lock->owner, &old, new); |
| } |
| |
| static __always_inline bool rt_mutex_try_acquire(struct rt_mutex_base *lock) |
| { |
| return rt_mutex_cmpxchg_acquire(lock, NULL, current); |
| } |
| |
| static __always_inline bool rt_mutex_cmpxchg_release(struct rt_mutex_base *lock, |
| struct task_struct *old, |
| struct task_struct *new) |
| { |
| return try_cmpxchg_release(&lock->owner, &old, new); |
| } |
| |
| /* |
| * Callers must hold the ->wait_lock -- which is the whole purpose as we force |
| * all future threads that attempt to [Rmw] the lock to the slowpath. As such |
| * relaxed semantics suffice. |
| */ |
| static __always_inline void mark_rt_mutex_waiters(struct rt_mutex_base *lock) |
| { |
| unsigned long owner, *p = (unsigned long *) &lock->owner; |
| |
| do { |
| owner = *p; |
| } while (cmpxchg_relaxed(p, owner, |
| owner | RT_MUTEX_HAS_WAITERS) != owner); |
| |
| /* |
| * The cmpxchg loop above is relaxed to avoid back-to-back ACQUIRE |
| * operations in the event of contention. Ensure the successful |
| * cmpxchg is visible. |
| */ |
| smp_mb__after_atomic(); |
| } |
| |
| /* |
| * Safe fastpath aware unlock: |
| * 1) Clear the waiters bit |
| * 2) Drop lock->wait_lock |
| * 3) Try to unlock the lock with cmpxchg |
| */ |
| static __always_inline bool unlock_rt_mutex_safe(struct rt_mutex_base *lock, |
| unsigned long flags) |
| __releases(lock->wait_lock) |
| { |
| struct task_struct *owner = rt_mutex_owner(lock); |
| |
| clear_rt_mutex_waiters(lock); |
| raw_spin_unlock_irqrestore(&lock->wait_lock, flags); |
| /* |
| * If a new waiter comes in between the unlock and the cmpxchg |
| * we have two situations: |
| * |
| * unlock(wait_lock); |
| * lock(wait_lock); |
| * cmpxchg(p, owner, 0) == owner |
| * mark_rt_mutex_waiters(lock); |
| * acquire(lock); |
| * or: |
| * |
| * unlock(wait_lock); |
| * lock(wait_lock); |
| * mark_rt_mutex_waiters(lock); |
| * |
| * cmpxchg(p, owner, 0) != owner |
| * enqueue_waiter(); |
| * unlock(wait_lock); |
| * lock(wait_lock); |
| * wake waiter(); |
| * unlock(wait_lock); |
| * lock(wait_lock); |
| * acquire(lock); |
| */ |
| return rt_mutex_cmpxchg_release(lock, owner, NULL); |
| } |
| |
| #else |
| static __always_inline bool rt_mutex_cmpxchg_acquire(struct rt_mutex_base *lock, |
| struct task_struct *old, |
| struct task_struct *new) |
| { |
| return false; |
| |
| } |
| |
| static int __sched rt_mutex_slowtrylock(struct rt_mutex_base *lock); |
| |
| static __always_inline bool rt_mutex_try_acquire(struct rt_mutex_base *lock) |
| { |
| /* |
| * With debug enabled rt_mutex_cmpxchg trylock() will always fail. |
| * |
| * Avoid unconditionally taking the slow path by using |
| * rt_mutex_slow_trylock() which is covered by the debug code and can |
| * acquire a non-contended rtmutex. |
| */ |
| return rt_mutex_slowtrylock(lock); |
| } |
| |
| static __always_inline bool rt_mutex_cmpxchg_release(struct rt_mutex_base *lock, |
| struct task_struct *old, |
| struct task_struct *new) |
| { |
| return false; |
| } |
| |
| static __always_inline void mark_rt_mutex_waiters(struct rt_mutex_base *lock) |
| { |
| lock->owner = (struct task_struct *) |
| ((unsigned long)lock->owner | RT_MUTEX_HAS_WAITERS); |
| } |
| |
| /* |
| * Simple slow path only version: lock->owner is protected by lock->wait_lock. |
| */ |
| static __always_inline bool unlock_rt_mutex_safe(struct rt_mutex_base *lock, |
| unsigned long flags) |
| __releases(lock->wait_lock) |
| { |
| lock->owner = NULL; |
| raw_spin_unlock_irqrestore(&lock->wait_lock, flags); |
| return true; |
| } |
| #endif |
| |
| static __always_inline int __waiter_prio(struct task_struct *task) |
| { |
| int prio = task->prio; |
| |
| if (!rt_prio(prio)) |
| return DEFAULT_PRIO; |
| |
| return prio; |
| } |
| |
| /* |
| * Update the waiter->tree copy of the sort keys. |
| */ |
| static __always_inline void |
| waiter_update_prio(struct rt_mutex_waiter *waiter, struct task_struct *task) |
| { |
| lockdep_assert_held(&waiter->lock->wait_lock); |
| lockdep_assert(RB_EMPTY_NODE(&waiter->tree.entry)); |
| |
| waiter->tree.prio = __waiter_prio(task); |
| waiter->tree.deadline = task->dl.deadline; |
| } |
| |
| /* |
| * Update the waiter->pi_tree copy of the sort keys (from the tree copy). |
| */ |
| static __always_inline void |
| waiter_clone_prio(struct rt_mutex_waiter *waiter, struct task_struct *task) |
| { |
| lockdep_assert_held(&waiter->lock->wait_lock); |
| lockdep_assert_held(&task->pi_lock); |
| lockdep_assert(RB_EMPTY_NODE(&waiter->pi_tree.entry)); |
| |
| waiter->pi_tree.prio = waiter->tree.prio; |
| waiter->pi_tree.deadline = waiter->tree.deadline; |
| } |
| |
| /* |
| * Only use with rt_waiter_node_{less,equal}() |
| */ |
| #define task_to_waiter_node(p) \ |
| &(struct rt_waiter_node){ .prio = __waiter_prio(p), .deadline = (p)->dl.deadline } |
| #define task_to_waiter(p) \ |
| &(struct rt_mutex_waiter){ .tree = *task_to_waiter_node(p) } |
| |
| static __always_inline int rt_waiter_node_less(struct rt_waiter_node *left, |
| struct rt_waiter_node *right) |
| { |
| if (left->prio < right->prio) |
| return 1; |
| |
| /* |
| * If both waiters have dl_prio(), we check the deadlines of the |
| * associated tasks. |
| * If left waiter has a dl_prio(), and we didn't return 1 above, |
| * then right waiter has a dl_prio() too. |
| */ |
| if (dl_prio(left->prio)) |
| return dl_time_before(left->deadline, right->deadline); |
| |
| return 0; |
| } |
| |
| static __always_inline int rt_waiter_node_equal(struct rt_waiter_node *left, |
| struct rt_waiter_node *right) |
| { |
| if (left->prio != right->prio) |
| return 0; |
| |
| /* |
| * If both waiters have dl_prio(), we check the deadlines of the |
| * associated tasks. |
| * If left waiter has a dl_prio(), and we didn't return 0 above, |
| * then right waiter has a dl_prio() too. |
| */ |
| if (dl_prio(left->prio)) |
| return left->deadline == right->deadline; |
| |
| return 1; |
| } |
| |
| static inline bool rt_mutex_steal(struct rt_mutex_waiter *waiter, |
| struct rt_mutex_waiter *top_waiter) |
| { |
| if (rt_waiter_node_less(&waiter->tree, &top_waiter->tree)) |
| return true; |
| |
| #ifdef RT_MUTEX_BUILD_SPINLOCKS |
| /* |
| * Note that RT tasks are excluded from same priority (lateral) |
| * steals to prevent the introduction of an unbounded latency. |
| */ |
| if (rt_prio(waiter->tree.prio) || dl_prio(waiter->tree.prio)) |
| return false; |
| |
| return rt_waiter_node_equal(&waiter->tree, &top_waiter->tree); |
| #else |
| return false; |
| #endif |
| } |
| |
| #define __node_2_waiter(node) \ |
| rb_entry((node), struct rt_mutex_waiter, tree.entry) |
| |
| static __always_inline bool __waiter_less(struct rb_node *a, const struct rb_node *b) |
| { |
| struct rt_mutex_waiter *aw = __node_2_waiter(a); |
| struct rt_mutex_waiter *bw = __node_2_waiter(b); |
| |
| if (rt_waiter_node_less(&aw->tree, &bw->tree)) |
| return 1; |
| |
| if (!build_ww_mutex()) |
| return 0; |
| |
| if (rt_waiter_node_less(&bw->tree, &aw->tree)) |
| return 0; |
| |
| /* NOTE: relies on waiter->ww_ctx being set before insertion */ |
| if (aw->ww_ctx) { |
| if (!bw->ww_ctx) |
| return 1; |
| |
| return (signed long)(aw->ww_ctx->stamp - |
| bw->ww_ctx->stamp) < 0; |
| } |
| |
| return 0; |
| } |
| |
| static __always_inline void |
| rt_mutex_enqueue(struct rt_mutex_base *lock, struct rt_mutex_waiter *waiter) |
| { |
| lockdep_assert_held(&lock->wait_lock); |
| |
| rb_add_cached(&waiter->tree.entry, &lock->waiters, __waiter_less); |
| } |
| |
| static __always_inline void |
| rt_mutex_dequeue(struct rt_mutex_base *lock, struct rt_mutex_waiter *waiter) |
| { |
| lockdep_assert_held(&lock->wait_lock); |
| |
| if (RB_EMPTY_NODE(&waiter->tree.entry)) |
| return; |
| |
| rb_erase_cached(&waiter->tree.entry, &lock->waiters); |
| RB_CLEAR_NODE(&waiter->tree.entry); |
| } |
| |
| #define __node_2_rt_node(node) \ |
| rb_entry((node), struct rt_waiter_node, entry) |
| |
| static __always_inline bool __pi_waiter_less(struct rb_node *a, const struct rb_node *b) |
| { |
| return rt_waiter_node_less(__node_2_rt_node(a), __node_2_rt_node(b)); |
| } |
| |
| static __always_inline void |
| rt_mutex_enqueue_pi(struct task_struct *task, struct rt_mutex_waiter *waiter) |
| { |
| lockdep_assert_held(&task->pi_lock); |
| |
| rb_add_cached(&waiter->pi_tree.entry, &task->pi_waiters, __pi_waiter_less); |
| } |
| |
| static __always_inline void |
| rt_mutex_dequeue_pi(struct task_struct *task, struct rt_mutex_waiter *waiter) |
| { |
| lockdep_assert_held(&task->pi_lock); |
| |
| if (RB_EMPTY_NODE(&waiter->pi_tree.entry)) |
| return; |
| |
| rb_erase_cached(&waiter->pi_tree.entry, &task->pi_waiters); |
| RB_CLEAR_NODE(&waiter->pi_tree.entry); |
| } |
| |
| static __always_inline void rt_mutex_adjust_prio(struct rt_mutex_base *lock, |
| struct task_struct *p) |
| { |
| struct task_struct *pi_task = NULL; |
| |
| lockdep_assert_held(&lock->wait_lock); |
| lockdep_assert(rt_mutex_owner(lock) == p); |
| lockdep_assert_held(&p->pi_lock); |
| |
| if (task_has_pi_waiters(p)) |
| pi_task = task_top_pi_waiter(p)->task; |
| |
| rt_mutex_setprio(p, pi_task); |
| } |
| |
| /* RT mutex specific wake_q wrappers */ |
| static __always_inline void rt_mutex_wake_q_add_task(struct rt_wake_q_head *wqh, |
| struct task_struct *task, |
| unsigned int wake_state) |
| { |
| if (IS_ENABLED(CONFIG_PREEMPT_RT) && wake_state == TASK_RTLOCK_WAIT) { |
| if (IS_ENABLED(CONFIG_PROVE_LOCKING)) |
| WARN_ON_ONCE(wqh->rtlock_task); |
| get_task_struct(task); |
| wqh->rtlock_task = task; |
| } else { |
| wake_q_add(&wqh->head, task); |
| } |
| } |
| |
| static __always_inline void rt_mutex_wake_q_add(struct rt_wake_q_head *wqh, |
| struct rt_mutex_waiter *w) |
| { |
| rt_mutex_wake_q_add_task(wqh, w->task, w->wake_state); |
| } |
| |
| static __always_inline void rt_mutex_wake_up_q(struct rt_wake_q_head *wqh) |
| { |
| if (IS_ENABLED(CONFIG_PREEMPT_RT) && wqh->rtlock_task) { |
| wake_up_state(wqh->rtlock_task, TASK_RTLOCK_WAIT); |
| put_task_struct(wqh->rtlock_task); |
| wqh->rtlock_task = NULL; |
| } |
| |
| if (!wake_q_empty(&wqh->head)) |
| wake_up_q(&wqh->head); |
| |
| /* Pairs with preempt_disable() in mark_wakeup_next_waiter() */ |
| preempt_enable(); |
| } |
| |
| /* |
| * Deadlock detection is conditional: |
| * |
| * If CONFIG_DEBUG_RT_MUTEXES=n, deadlock detection is only conducted |
| * if the detect argument is == RT_MUTEX_FULL_CHAINWALK. |
| * |
| * If CONFIG_DEBUG_RT_MUTEXES=y, deadlock detection is always |
| * conducted independent of the detect argument. |
| * |
| * If the waiter argument is NULL this indicates the deboost path and |
| * deadlock detection is disabled independent of the detect argument |
| * and the config settings. |
| */ |
| static __always_inline bool |
| rt_mutex_cond_detect_deadlock(struct rt_mutex_waiter *waiter, |
| enum rtmutex_chainwalk chwalk) |
| { |
| if (IS_ENABLED(CONFIG_DEBUG_RT_MUTEXES)) |
| return waiter != NULL; |
| return chwalk == RT_MUTEX_FULL_CHAINWALK; |
| } |
| |
| static __always_inline struct rt_mutex_base *task_blocked_on_lock(struct task_struct *p) |
| { |
| return p->pi_blocked_on ? p->pi_blocked_on->lock : NULL; |
| } |
| |
| /* |
| * Adjust the priority chain. Also used for deadlock detection. |
| * Decreases task's usage by one - may thus free the task. |
| * |
| * @task: the task owning the mutex (owner) for which a chain walk is |
| * probably needed |
| * @chwalk: do we have to carry out deadlock detection? |
| * @orig_lock: the mutex (can be NULL if we are walking the chain to recheck |
| * things for a task that has just got its priority adjusted, and |
| * is waiting on a mutex) |
| * @next_lock: the mutex on which the owner of @orig_lock was blocked before |
| * we dropped its pi_lock. Is never dereferenced, only used for |
| * comparison to detect lock chain changes. |
| * @orig_waiter: rt_mutex_waiter struct for the task that has just donated |
| * its priority to the mutex owner (can be NULL in the case |
| * depicted above or if the top waiter is gone away and we are |
| * actually deboosting the owner) |
| * @top_task: the current top waiter |
| * |
| * Returns 0 or -EDEADLK. |
| * |
| * Chain walk basics and protection scope |
| * |
| * [R] refcount on task |
| * [Pn] task->pi_lock held |
| * [L] rtmutex->wait_lock held |
| * |
| * Normal locking order: |
| * |
| * rtmutex->wait_lock |
| * task->pi_lock |
| * |
| * Step Description Protected by |
| * function arguments: |
| * @task [R] |
| * @orig_lock if != NULL @top_task is blocked on it |
| * @next_lock Unprotected. Cannot be |
| * dereferenced. Only used for |
| * comparison. |
| * @orig_waiter if != NULL @top_task is blocked on it |
| * @top_task current, or in case of proxy |
| * locking protected by calling |
| * code |
| * again: |
| * loop_sanity_check(); |
| * retry: |
| * [1] lock(task->pi_lock); [R] acquire [P1] |
| * [2] waiter = task->pi_blocked_on; [P1] |
| * [3] check_exit_conditions_1(); [P1] |
| * [4] lock = waiter->lock; [P1] |
| * [5] if (!try_lock(lock->wait_lock)) { [P1] try to acquire [L] |
| * unlock(task->pi_lock); release [P1] |
| * goto retry; |
| * } |
| * [6] check_exit_conditions_2(); [P1] + [L] |
| * [7] requeue_lock_waiter(lock, waiter); [P1] + [L] |
| * [8] unlock(task->pi_lock); release [P1] |
| * put_task_struct(task); release [R] |
| * [9] check_exit_conditions_3(); [L] |
| * [10] task = owner(lock); [L] |
| * get_task_struct(task); [L] acquire [R] |
| * lock(task->pi_lock); [L] acquire [P2] |
| * [11] requeue_pi_waiter(tsk, waiters(lock));[P2] + [L] |
| * [12] check_exit_conditions_4(); [P2] + [L] |
| * [13] unlock(task->pi_lock); release [P2] |
| * unlock(lock->wait_lock); release [L] |
| * goto again; |
| * |
| * Where P1 is the blocking task and P2 is the lock owner; going up one step |
| * the owner becomes the next blocked task etc.. |
| * |
| * |
| */ |
| static int __sched rt_mutex_adjust_prio_chain(struct task_struct *task, |
| enum rtmutex_chainwalk chwalk, |
| struct rt_mutex_base *orig_lock, |
| struct rt_mutex_base *next_lock, |
| struct rt_mutex_waiter *orig_waiter, |
| struct task_struct *top_task) |
| { |
| struct rt_mutex_waiter *waiter, *top_waiter = orig_waiter; |
| struct rt_mutex_waiter *prerequeue_top_waiter; |
| int ret = 0, depth = 0; |
| struct rt_mutex_base *lock; |
| bool detect_deadlock; |
| bool requeue = true; |
| |
| detect_deadlock = rt_mutex_cond_detect_deadlock(orig_waiter, chwalk); |
| |
| /* |
| * The (de)boosting is a step by step approach with a lot of |
| * pitfalls. We want this to be preemptible and we want hold a |
| * maximum of two locks per step. So we have to check |
| * carefully whether things change under us. |
| */ |
| again: |
| /* |
| * We limit the lock chain length for each invocation. |
| */ |
| if (++depth > max_lock_depth) { |
| static int prev_max; |
| |
| /* |
| * Print this only once. If the admin changes the limit, |
| * print a new message when reaching the limit again. |
| */ |
| if (prev_max != max_lock_depth) { |
| prev_max = max_lock_depth; |
| printk(KERN_WARNING "Maximum lock depth %d reached " |
| "task: %s (%d)\n", max_lock_depth, |
| top_task->comm, task_pid_nr(top_task)); |
| } |
| put_task_struct(task); |
| |
| return -EDEADLK; |
| } |
| |
| /* |
| * We are fully preemptible here and only hold the refcount on |
| * @task. So everything can have changed under us since the |
| * caller or our own code below (goto retry/again) dropped all |
| * locks. |
| */ |
| retry: |
| /* |
| * [1] Task cannot go away as we did a get_task() before ! |
| */ |
| raw_spin_lock_irq(&task->pi_lock); |
| |
| /* |
| * [2] Get the waiter on which @task is blocked on. |
| */ |
| waiter = task->pi_blocked_on; |
| |
| /* |
| * [3] check_exit_conditions_1() protected by task->pi_lock. |
| */ |
| |
| /* |
| * Check whether the end of the boosting chain has been |
| * reached or the state of the chain has changed while we |
| * dropped the locks. |
| */ |
| if (!waiter) |
| goto out_unlock_pi; |
| |
| /* |
| * Check the orig_waiter state. After we dropped the locks, |
| * the previous owner of the lock might have released the lock. |
| */ |
| if (orig_waiter && !rt_mutex_owner(orig_lock)) |
| goto out_unlock_pi; |
| |
| /* |
| * We dropped all locks after taking a refcount on @task, so |
| * the task might have moved on in the lock chain or even left |
| * the chain completely and blocks now on an unrelated lock or |
| * on @orig_lock. |
| * |
| * We stored the lock on which @task was blocked in @next_lock, |
| * so we can detect the chain change. |
| */ |
| if (next_lock != waiter->lock) |
| goto out_unlock_pi; |
| |
| /* |
| * There could be 'spurious' loops in the lock graph due to ww_mutex, |
| * consider: |
| * |
| * P1: A, ww_A, ww_B |
| * P2: ww_B, ww_A |
| * P3: A |
| * |
| * P3 should not return -EDEADLK because it gets trapped in the cycle |
| * created by P1 and P2 (which will resolve -- and runs into |
| * max_lock_depth above). Therefore disable detect_deadlock such that |
| * the below termination condition can trigger once all relevant tasks |
| * are boosted. |
| * |
| * Even when we start with ww_mutex we can disable deadlock detection, |
| * since we would supress a ww_mutex induced deadlock at [6] anyway. |
| * Supressing it here however is not sufficient since we might still |
| * hit [6] due to adjustment driven iteration. |
| * |
| * NOTE: if someone were to create a deadlock between 2 ww_classes we'd |
| * utterly fail to report it; lockdep should. |
| */ |
| if (IS_ENABLED(CONFIG_PREEMPT_RT) && waiter->ww_ctx && detect_deadlock) |
| detect_deadlock = false; |
| |
| /* |
| * Drop out, when the task has no waiters. Note, |
| * top_waiter can be NULL, when we are in the deboosting |
| * mode! |
| */ |
| if (top_waiter) { |
| if (!task_has_pi_waiters(task)) |
| goto out_unlock_pi; |
| /* |
| * If deadlock detection is off, we stop here if we |
| * are not the top pi waiter of the task. If deadlock |
| * detection is enabled we continue, but stop the |
| * requeueing in the chain walk. |
| */ |
| if (top_waiter != task_top_pi_waiter(task)) { |
| if (!detect_deadlock) |
| goto out_unlock_pi; |
| else |
| requeue = false; |
| } |
| } |
| |
| /* |
| * If the waiter priority is the same as the task priority |
| * then there is no further priority adjustment necessary. If |
| * deadlock detection is off, we stop the chain walk. If its |
| * enabled we continue, but stop the requeueing in the chain |
| * walk. |
| */ |
| if (rt_waiter_node_equal(&waiter->tree, task_to_waiter_node(task))) { |
| if (!detect_deadlock) |
| goto out_unlock_pi; |
| else |
| requeue = false; |
| } |
| |
| /* |
| * [4] Get the next lock; per holding task->pi_lock we can't unblock |
| * and guarantee @lock's existence. |
| */ |
| lock = waiter->lock; |
| /* |
| * [5] We need to trylock here as we are holding task->pi_lock, |
| * which is the reverse lock order versus the other rtmutex |
| * operations. |
| * |
| * Per the above, holding task->pi_lock guarantees lock exists, so |
| * inverting this lock order is infeasible from a life-time |
| * perspective. |
| */ |
| if (!raw_spin_trylock(&lock->wait_lock)) { |
| raw_spin_unlock_irq(&task->pi_lock); |
| cpu_relax(); |
| goto retry; |
| } |
| |
| /* |
| * [6] check_exit_conditions_2() protected by task->pi_lock and |
| * lock->wait_lock. |
| * |
| * Deadlock detection. If the lock is the same as the original |
| * lock which caused us to walk the lock chain or if the |
| * current lock is owned by the task which initiated the chain |
| * walk, we detected a deadlock. |
| */ |
| if (lock == orig_lock || rt_mutex_owner(lock) == top_task) { |
| ret = -EDEADLK; |
| |
| /* |
| * When the deadlock is due to ww_mutex; also see above. Don't |
| * report the deadlock and instead let the ww_mutex wound/die |
| * logic pick which of the contending threads gets -EDEADLK. |
| * |
| * NOTE: assumes the cycle only contains a single ww_class; any |
| * other configuration and we fail to report; also, see |
| * lockdep. |
| */ |
| if (IS_ENABLED(CONFIG_PREEMPT_RT) && orig_waiter && orig_waiter->ww_ctx) |
| ret = 0; |
| |
| raw_spin_unlock(&lock->wait_lock); |
| goto out_unlock_pi; |
| } |
| |
| /* |
| * If we just follow the lock chain for deadlock detection, no |
| * need to do all the requeue operations. To avoid a truckload |
| * of conditionals around the various places below, just do the |
| * minimum chain walk checks. |
| */ |
| if (!requeue) { |
| /* |
| * No requeue[7] here. Just release @task [8] |
| */ |
| raw_spin_unlock(&task->pi_lock); |
| put_task_struct(task); |
| |
| /* |
| * [9] check_exit_conditions_3 protected by lock->wait_lock. |
| * If there is no owner of the lock, end of chain. |
| */ |
| if (!rt_mutex_owner(lock)) { |
| raw_spin_unlock_irq(&lock->wait_lock); |
| return 0; |
| } |
| |
| /* [10] Grab the next task, i.e. owner of @lock */ |
| task = get_task_struct(rt_mutex_owner(lock)); |
| raw_spin_lock(&task->pi_lock); |
| |
| /* |
| * No requeue [11] here. We just do deadlock detection. |
| * |
| * [12] Store whether owner is blocked |
| * itself. Decision is made after dropping the locks |
| */ |
| next_lock = task_blocked_on_lock(task); |
| /* |
| * Get the top waiter for the next iteration |
| */ |
| top_waiter = rt_mutex_top_waiter(lock); |
| |
| /* [13] Drop locks */ |
| raw_spin_unlock(&task->pi_lock); |
| raw_spin_unlock_irq(&lock->wait_lock); |
| |
| /* If owner is not blocked, end of chain. */ |
| if (!next_lock) |
| goto out_put_task; |
| goto again; |
| } |
| |
| /* |
| * Store the current top waiter before doing the requeue |
| * operation on @lock. We need it for the boost/deboost |
| * decision below. |
| */ |
| prerequeue_top_waiter = rt_mutex_top_waiter(lock); |
| |
| /* [7] Requeue the waiter in the lock waiter tree. */ |
| rt_mutex_dequeue(lock, waiter); |
| |
| /* |
| * Update the waiter prio fields now that we're dequeued. |
| * |
| * These values can have changed through either: |
| * |
| * sys_sched_set_scheduler() / sys_sched_setattr() |
| * |
| * or |
| * |
| * DL CBS enforcement advancing the effective deadline. |
| */ |
| waiter_update_prio(waiter, task); |
| |
| rt_mutex_enqueue(lock, waiter); |
| |
| /* |
| * [8] Release the (blocking) task in preparation for |
| * taking the owner task in [10]. |
| * |
| * Since we hold lock->waiter_lock, task cannot unblock, even if we |
| * release task->pi_lock. |
| */ |
| raw_spin_unlock(&task->pi_lock); |
| put_task_struct(task); |
| |
| /* |
| * [9] check_exit_conditions_3 protected by lock->wait_lock. |
| * |
| * We must abort the chain walk if there is no lock owner even |
| * in the dead lock detection case, as we have nothing to |
| * follow here. This is the end of the chain we are walking. |
| */ |
| if (!rt_mutex_owner(lock)) { |
| /* |
| * If the requeue [7] above changed the top waiter, |
| * then we need to wake the new top waiter up to try |
| * to get the lock. |
| */ |
| top_waiter = rt_mutex_top_waiter(lock); |
| if (prerequeue_top_waiter != top_waiter) |
| wake_up_state(top_waiter->task, top_waiter->wake_state); |
| raw_spin_unlock_irq(&lock->wait_lock); |
| return 0; |
| } |
| |
| /* |
| * [10] Grab the next task, i.e. the owner of @lock |
| * |
| * Per holding lock->wait_lock and checking for !owner above, there |
| * must be an owner and it cannot go away. |
| */ |
| task = get_task_struct(rt_mutex_owner(lock)); |
| raw_spin_lock(&task->pi_lock); |
| |
| /* [11] requeue the pi waiters if necessary */ |
| if (waiter == rt_mutex_top_waiter(lock)) { |
| /* |
| * The waiter became the new top (highest priority) |
| * waiter on the lock. Replace the previous top waiter |
| * in the owner tasks pi waiters tree with this waiter |
| * and adjust the priority of the owner. |
| */ |
| rt_mutex_dequeue_pi(task, prerequeue_top_waiter); |
| waiter_clone_prio(waiter, task); |
| rt_mutex_enqueue_pi(task, waiter); |
| rt_mutex_adjust_prio(lock, task); |
| |
| } else if (prerequeue_top_waiter == waiter) { |
| /* |
| * The waiter was the top waiter on the lock, but is |
| * no longer the top priority waiter. Replace waiter in |
| * the owner tasks pi waiters tree with the new top |
| * (highest priority) waiter and adjust the priority |
| * of the owner. |
| * The new top waiter is stored in @waiter so that |
| * @waiter == @top_waiter evaluates to true below and |
| * we continue to deboost the rest of the chain. |
| */ |
| rt_mutex_dequeue_pi(task, waiter); |
| waiter = rt_mutex_top_waiter(lock); |
| waiter_clone_prio(waiter, task); |
| rt_mutex_enqueue_pi(task, waiter); |
| rt_mutex_adjust_prio(lock, task); |
| } else { |
| /* |
| * Nothing changed. No need to do any priority |
| * adjustment. |
| */ |
| } |
| |
| /* |
| * [12] check_exit_conditions_4() protected by task->pi_lock |
| * and lock->wait_lock. The actual decisions are made after we |
| * dropped the locks. |
| * |
| * Check whether the task which owns the current lock is pi |
| * blocked itself. If yes we store a pointer to the lock for |
| * the lock chain change detection above. After we dropped |
| * task->pi_lock next_lock cannot be dereferenced anymore. |
| */ |
| next_lock = task_blocked_on_lock(task); |
| /* |
| * Store the top waiter of @lock for the end of chain walk |
| * decision below. |
| */ |
| top_waiter = rt_mutex_top_waiter(lock); |
| |
| /* [13] Drop the locks */ |
| raw_spin_unlock(&task->pi_lock); |
| raw_spin_unlock_irq(&lock->wait_lock); |
| |
| /* |
| * Make the actual exit decisions [12], based on the stored |
| * values. |
| * |
| * We reached the end of the lock chain. Stop right here. No |
| * point to go back just to figure that out. |
| */ |
| if (!next_lock) |
| goto out_put_task; |
| |
| /* |
| * If the current waiter is not the top waiter on the lock, |
| * then we can stop the chain walk here if we are not in full |
| * deadlock detection mode. |
| */ |
| if (!detect_deadlock && waiter != top_waiter) |
| goto out_put_task; |
| |
| goto again; |
| |
| out_unlock_pi: |
| raw_spin_unlock_irq(&task->pi_lock); |
| out_put_task: |
| put_task_struct(task); |
| |
| return ret; |
| } |
| |
| /* |
| * Try to take an rt-mutex |
| * |
| * Must be called with lock->wait_lock held and interrupts disabled |
| * |
| * @lock: The lock to be acquired. |
| * @task: The task which wants to acquire the lock |
| * @waiter: The waiter that is queued to the lock's wait tree if the |
| * callsite called task_blocked_on_lock(), otherwise NULL |
| */ |
| static int __sched |
| try_to_take_rt_mutex(struct rt_mutex_base *lock, struct task_struct *task, |
| struct rt_mutex_waiter *waiter) |
| { |
| lockdep_assert_held(&lock->wait_lock); |
| |
| /* |
| * Before testing whether we can acquire @lock, we set the |
| * RT_MUTEX_HAS_WAITERS bit in @lock->owner. This forces all |
| * other tasks which try to modify @lock into the slow path |
| * and they serialize on @lock->wait_lock. |
| * |
| * The RT_MUTEX_HAS_WAITERS bit can have a transitional state |
| * as explained at the top of this file if and only if: |
| * |
| * - There is a lock owner. The caller must fixup the |
| * transient state if it does a trylock or leaves the lock |
| * function due to a signal or timeout. |
| * |
| * - @task acquires the lock and there are no other |
| * waiters. This is undone in rt_mutex_set_owner(@task) at |
| * the end of this function. |
| */ |
| mark_rt_mutex_waiters(lock); |
| |
| /* |
| * If @lock has an owner, give up. |
| */ |
| if (rt_mutex_owner(lock)) |
| return 0; |
| |
| /* |
| * If @waiter != NULL, @task has already enqueued the waiter |
| * into @lock waiter tree. If @waiter == NULL then this is a |
| * trylock attempt. |
| */ |
| if (waiter) { |
| struct rt_mutex_waiter *top_waiter = rt_mutex_top_waiter(lock); |
| |
| /* |
| * If waiter is the highest priority waiter of @lock, |
| * or allowed to steal it, take it over. |
| */ |
| if (waiter == top_waiter || rt_mutex_steal(waiter, top_waiter)) { |
| /* |
| * We can acquire the lock. Remove the waiter from the |
| * lock waiters tree. |
| */ |
| rt_mutex_dequeue(lock, waiter); |
| } else { |
| return 0; |
| } |
| } else { |
| /* |
| * If the lock has waiters already we check whether @task is |
| * eligible to take over the lock. |
| * |
| * If there are no other waiters, @task can acquire |
| * the lock. @task->pi_blocked_on is NULL, so it does |
| * not need to be dequeued. |
| */ |
| if (rt_mutex_has_waiters(lock)) { |
| /* Check whether the trylock can steal it. */ |
| if (!rt_mutex_steal(task_to_waiter(task), |
| rt_mutex_top_waiter(lock))) |
| return 0; |
| |
| /* |
| * The current top waiter stays enqueued. We |
| * don't have to change anything in the lock |
| * waiters order. |
| */ |
| } else { |
| /* |
| * No waiters. Take the lock without the |
| * pi_lock dance.@task->pi_blocked_on is NULL |
| * and we have no waiters to enqueue in @task |
| * pi waiters tree. |
| */ |
| goto takeit; |
| } |
| } |
| |
| /* |
| * Clear @task->pi_blocked_on. Requires protection by |
| * @task->pi_lock. Redundant operation for the @waiter == NULL |
| * case, but conditionals are more expensive than a redundant |
| * store. |
| */ |
| raw_spin_lock(&task->pi_lock); |
| task->pi_blocked_on = NULL; |
| /* |
| * Finish the lock acquisition. @task is the new owner. If |
| * other waiters exist we have to insert the highest priority |
| * waiter into @task->pi_waiters tree. |
| */ |
| if (rt_mutex_has_waiters(lock)) |
| rt_mutex_enqueue_pi(task, rt_mutex_top_waiter(lock)); |
| raw_spin_unlock(&task->pi_lock); |
| |
| takeit: |
| /* |
| * This either preserves the RT_MUTEX_HAS_WAITERS bit if there |
| * are still waiters or clears it. |
| */ |
| rt_mutex_set_owner(lock, task); |
| |
| return 1; |
| } |
| |
| /* |
| * Task blocks on lock. |
| * |
| * Prepare waiter and propagate pi chain |
| * |
| * This must be called with lock->wait_lock held and interrupts disabled |
| */ |
| static int __sched task_blocks_on_rt_mutex(struct rt_mutex_base *lock, |
| struct rt_mutex_waiter *waiter, |
| struct task_struct *task, |
| struct ww_acquire_ctx *ww_ctx, |
| enum rtmutex_chainwalk chwalk) |
| { |
| struct task_struct *owner = rt_mutex_owner(lock); |
| struct rt_mutex_waiter *top_waiter = waiter; |
| struct rt_mutex_base *next_lock; |
| int chain_walk = 0, res; |
| |
| lockdep_assert_held(&lock->wait_lock); |
| |
| /* |
| * Early deadlock detection. We really don't want the task to |
| * enqueue on itself just to untangle the mess later. It's not |
| * only an optimization. We drop the locks, so another waiter |
| * can come in before the chain walk detects the deadlock. So |
| * the other will detect the deadlock and return -EDEADLOCK, |
| * which is wrong, as the other waiter is not in a deadlock |
| * situation. |
| * |
| * Except for ww_mutex, in that case the chain walk must already deal |
| * with spurious cycles, see the comments at [3] and [6]. |
| */ |
| if (owner == task && !(build_ww_mutex() && ww_ctx)) |
| return -EDEADLK; |
| |
| raw_spin_lock(&task->pi_lock); |
| waiter->task = task; |
| waiter->lock = lock; |
| waiter_update_prio(waiter, task); |
| waiter_clone_prio(waiter, task); |
| |
| /* Get the top priority waiter on the lock */ |
| if (rt_mutex_has_waiters(lock)) |
| top_waiter = rt_mutex_top_waiter(lock); |
| rt_mutex_enqueue(lock, waiter); |
| |
| task->pi_blocked_on = waiter; |
| |
| raw_spin_unlock(&task->pi_lock); |
| |
| if (build_ww_mutex() && ww_ctx) { |
| struct rt_mutex *rtm; |
| |
| /* Check whether the waiter should back out immediately */ |
| rtm = container_of(lock, struct rt_mutex, rtmutex); |
| res = __ww_mutex_add_waiter(waiter, rtm, ww_ctx); |
| if (res) { |
| raw_spin_lock(&task->pi_lock); |
| rt_mutex_dequeue(lock, waiter); |
| task->pi_blocked_on = NULL; |
| raw_spin_unlock(&task->pi_lock); |
| return res; |
| } |
| } |
| |
| if (!owner) |
| return 0; |
| |
| raw_spin_lock(&owner->pi_lock); |
| if (waiter == rt_mutex_top_waiter(lock)) { |
| rt_mutex_dequeue_pi(owner, top_waiter); |
| rt_mutex_enqueue_pi(owner, waiter); |
| |
| rt_mutex_adjust_prio(lock, owner); |
| if (owner->pi_blocked_on) |
| chain_walk = 1; |
| } else if (rt_mutex_cond_detect_deadlock(waiter, chwalk)) { |
| chain_walk = 1; |
| } |
| |
| /* Store the lock on which owner is blocked or NULL */ |
| next_lock = task_blocked_on_lock(owner); |
| |
| raw_spin_unlock(&owner->pi_lock); |
| /* |
| * Even if full deadlock detection is on, if the owner is not |
| * blocked itself, we can avoid finding this out in the chain |
| * walk. |
| */ |
| if (!chain_walk || !next_lock) |
| return 0; |
| |
| /* |
| * The owner can't disappear while holding a lock, |
| * so the owner struct is protected by wait_lock. |
| * Gets dropped in rt_mutex_adjust_prio_chain()! |
| */ |
| get_task_struct(owner); |
| |
| raw_spin_unlock_irq(&lock->wait_lock); |
| |
| res = rt_mutex_adjust_prio_chain(owner, chwalk, lock, |
| next_lock, waiter, task); |
| |
| raw_spin_lock_irq(&lock->wait_lock); |
| |
| return res; |
| } |
| |
| /* |
| * Remove the top waiter from the current tasks pi waiter tree and |
| * queue it up. |
| * |
| * Called with lock->wait_lock held and interrupts disabled. |
| */ |
| static void __sched mark_wakeup_next_waiter(struct rt_wake_q_head *wqh, |
| struct rt_mutex_base *lock) |
| { |
| struct rt_mutex_waiter *waiter; |
| |
| lockdep_assert_held(&lock->wait_lock); |
| |
| raw_spin_lock(¤t->pi_lock); |
| |
| waiter = rt_mutex_top_waiter(lock); |
| |
| /* |
| * Remove it from current->pi_waiters and deboost. |
| * |
| * We must in fact deboost here in order to ensure we call |
| * rt_mutex_setprio() to update p->pi_top_task before the |
| * task unblocks. |
| */ |
| rt_mutex_dequeue_pi(current, waiter); |
| rt_mutex_adjust_prio(lock, current); |
| |
| /* |
| * As we are waking up the top waiter, and the waiter stays |
| * queued on the lock until it gets the lock, this lock |
| * obviously has waiters. Just set the bit here and this has |
| * the added benefit of forcing all new tasks into the |
| * slow path making sure no task of lower priority than |
| * the top waiter can steal this lock. |
| */ |
| lock->owner = (void *) RT_MUTEX_HAS_WAITERS; |
| |
| /* |
| * We deboosted before waking the top waiter task such that we don't |
| * run two tasks with the 'same' priority (and ensure the |
| * p->pi_top_task pointer points to a blocked task). This however can |
| * lead to priority inversion if we would get preempted after the |
| * deboost but before waking our donor task, hence the preempt_disable() |
| * before unlock. |
| * |
| * Pairs with preempt_enable() in rt_mutex_wake_up_q(); |
| */ |
| preempt_disable(); |
| rt_mutex_wake_q_add(wqh, waiter); |
| raw_spin_unlock(¤t->pi_lock); |
| } |
| |
| static int __sched __rt_mutex_slowtrylock(struct rt_mutex_base *lock) |
| { |
| int ret = try_to_take_rt_mutex(lock, current, NULL); |
| |
| /* |
| * try_to_take_rt_mutex() sets the lock waiters bit |
| * unconditionally. Clean this up. |
| */ |
| fixup_rt_mutex_waiters(lock, true); |
| |
| return ret; |
| } |
| |
| /* |
| * Slow path try-lock function: |
| */ |
| static int __sched rt_mutex_slowtrylock(struct rt_mutex_base *lock) |
| { |
| unsigned long flags; |
| int ret; |
| |
| /* |
| * If the lock already has an owner we fail to get the lock. |
| * This can be done without taking the @lock->wait_lock as |
| * it is only being read, and this is a trylock anyway. |
| */ |
| if (rt_mutex_owner(lock)) |
| return 0; |
| |
| /* |
| * The mutex has currently no owner. Lock the wait lock and try to |
| * acquire the lock. We use irqsave here to support early boot calls. |
| */ |
| raw_spin_lock_irqsave(&lock->wait_lock, flags); |
| |
| ret = __rt_mutex_slowtrylock(lock); |
| |
| raw_spin_unlock_irqrestore(&lock->wait_lock, flags); |
| |
| return ret; |
| } |
| |
| static __always_inline int __rt_mutex_trylock(struct rt_mutex_base *lock) |
| { |
| if (likely(rt_mutex_cmpxchg_acquire(lock, NULL, current))) |
| return 1; |
| |
| return rt_mutex_slowtrylock(lock); |
| } |
| |
| /* |
| * Slow path to release a rt-mutex. |
| */ |
| static void __sched rt_mutex_slowunlock(struct rt_mutex_base *lock) |
| { |
| DEFINE_RT_WAKE_Q(wqh); |
| unsigned long flags; |
| |
| /* irqsave required to support early boot calls */ |
| raw_spin_lock_irqsave(&lock->wait_lock, flags); |
| |
| debug_rt_mutex_unlock(lock); |
| |
| /* |
| * We must be careful here if the fast path is enabled. If we |
| * have no waiters queued we cannot set owner to NULL here |
| * because of: |
| * |
| * foo->lock->owner = NULL; |
| * rtmutex_lock(foo->lock); <- fast path |
| * free = atomic_dec_and_test(foo->refcnt); |
| * rtmutex_unlock(foo->lock); <- fast path |
| * if (free) |
| * kfree(foo); |
| * raw_spin_unlock(foo->lock->wait_lock); |
| * |
| * So for the fastpath enabled kernel: |
| * |
| * Nothing can set the waiters bit as long as we hold |
| * lock->wait_lock. So we do the following sequence: |
| * |
| * owner = rt_mutex_owner(lock); |
| * clear_rt_mutex_waiters(lock); |
| * raw_spin_unlock(&lock->wait_lock); |
| * if (cmpxchg(&lock->owner, owner, 0) == owner) |
| * return; |
| * goto retry; |
| * |
| * The fastpath disabled variant is simple as all access to |
| * lock->owner is serialized by lock->wait_lock: |
| * |
| * lock->owner = NULL; |
| * raw_spin_unlock(&lock->wait_lock); |
| */ |
| while (!rt_mutex_has_waiters(lock)) { |
| /* Drops lock->wait_lock ! */ |
| if (unlock_rt_mutex_safe(lock, flags) == true) |
| return; |
| /* Relock the rtmutex and try again */ |
| raw_spin_lock_irqsave(&lock->wait_lock, flags); |
| } |
| |
| /* |
| * The wakeup next waiter path does not suffer from the above |
| * race. See the comments there. |
| * |
| * Queue the next waiter for wakeup once we release the wait_lock. |
| */ |
| mark_wakeup_next_waiter(&wqh, lock); |
| raw_spin_unlock_irqrestore(&lock->wait_lock, flags); |
| |
| rt_mutex_wake_up_q(&wqh); |
| } |
| |
| static __always_inline void __rt_mutex_unlock(struct rt_mutex_base *lock) |
| { |
| if (likely(rt_mutex_cmpxchg_release(lock, current, NULL))) |
| return; |
| |
| rt_mutex_slowunlock(lock); |
| } |
| |
| #ifdef CONFIG_SMP |
| static bool rtmutex_spin_on_owner(struct rt_mutex_base *lock, |
| struct rt_mutex_waiter *waiter, |
| struct task_struct *owner) |
| { |
| bool res = true; |
| |
| rcu_read_lock(); |
| for (;;) { |
| /* If owner changed, trylock again. */ |
| if (owner != rt_mutex_owner(lock)) |
| break; |
| /* |
| * Ensure that @owner is dereferenced after checking that |
| * the lock owner still matches @owner. If that fails, |
| * @owner might point to freed memory. If it still matches, |
| * the rcu_read_lock() ensures the memory stays valid. |
| */ |
| barrier(); |
| /* |
| * Stop spinning when: |
| * - the lock owner has been scheduled out |
| * - current is not longer the top waiter |
| * - current is requested to reschedule (redundant |
| * for CONFIG_PREEMPT_RCU=y) |
| * - the VCPU on which owner runs is preempted |
| */ |
| if (!owner_on_cpu(owner) || need_resched() || |
| !rt_mutex_waiter_is_top_waiter(lock, waiter)) { |
| res = false; |
| break; |
| } |
| cpu_relax(); |
| } |
| rcu_read_unlock(); |
| return res; |
| } |
| #else |
| static bool rtmutex_spin_on_owner(struct rt_mutex_base *lock, |
| struct rt_mutex_waiter *waiter, |
| struct task_struct *owner) |
| { |
| return false; |
| } |
| #endif |
| |
| #ifdef RT_MUTEX_BUILD_MUTEX |
| /* |
| * Functions required for: |
| * - rtmutex, futex on all kernels |
| * - mutex and rwsem substitutions on RT kernels |
| */ |
| |
| /* |
| * Remove a waiter from a lock and give up |
| * |
| * Must be called with lock->wait_lock held and interrupts disabled. It must |
| * have just failed to try_to_take_rt_mutex(). |
| */ |
| static void __sched remove_waiter(struct rt_mutex_base *lock, |
| struct rt_mutex_waiter *waiter) |
| { |
| bool is_top_waiter = (waiter == rt_mutex_top_waiter(lock)); |
| struct task_struct *owner = rt_mutex_owner(lock); |
| struct rt_mutex_base *next_lock; |
| |
| lockdep_assert_held(&lock->wait_lock); |
| |
| raw_spin_lock(¤t->pi_lock); |
| rt_mutex_dequeue(lock, waiter); |
| current->pi_blocked_on = NULL; |
| raw_spin_unlock(¤t->pi_lock); |
| |
| /* |
| * Only update priority if the waiter was the highest priority |
| * waiter of the lock and there is an owner to update. |
| */ |
| if (!owner || !is_top_waiter) |
| return; |
| |
| raw_spin_lock(&owner->pi_lock); |
| |
| rt_mutex_dequeue_pi(owner, waiter); |
| |
| if (rt_mutex_has_waiters(lock)) |
| rt_mutex_enqueue_pi(owner, rt_mutex_top_waiter(lock)); |
| |
| rt_mutex_adjust_prio(lock, owner); |
| |
| /* Store the lock on which owner is blocked or NULL */ |
| next_lock = task_blocked_on_lock(owner); |
| |
| raw_spin_unlock(&owner->pi_lock); |
| |
| /* |
| * Don't walk the chain, if the owner task is not blocked |
| * itself. |
| */ |
| if (!next_lock) |
| return; |
| |
| /* gets dropped in rt_mutex_adjust_prio_chain()! */ |
| get_task_struct(owner); |
| |
| raw_spin_unlock_irq(&lock->wait_lock); |
| |
| rt_mutex_adjust_prio_chain(owner, RT_MUTEX_MIN_CHAINWALK, lock, |
| next_lock, NULL, current); |
| |
| raw_spin_lock_irq(&lock->wait_lock); |
| } |
| |
| /** |
| * rt_mutex_slowlock_block() - Perform the wait-wake-try-to-take loop |
| * @lock: the rt_mutex to take |
| * @ww_ctx: WW mutex context pointer |
| * @state: the state the task should block in (TASK_INTERRUPTIBLE |
| * or TASK_UNINTERRUPTIBLE) |
| * @timeout: the pre-initialized and started timer, or NULL for none |
| * @waiter: the pre-initialized rt_mutex_waiter |
| * |
| * Must be called with lock->wait_lock held and interrupts disabled |
| */ |
| static int __sched rt_mutex_slowlock_block(struct rt_mutex_base *lock, |
| struct ww_acquire_ctx *ww_ctx, |
| unsigned int state, |
| struct hrtimer_sleeper *timeout, |
| struct rt_mutex_waiter *waiter) |
| { |
| struct rt_mutex *rtm = container_of(lock, struct rt_mutex, rtmutex); |
| struct task_struct *owner; |
| int ret = 0; |
| |
| for (;;) { |
| /* Try to acquire the lock: */ |
| if (try_to_take_rt_mutex(lock, current, waiter)) |
| break; |
| |
| if (timeout && !timeout->task) { |
| ret = -ETIMEDOUT; |
| break; |
| } |
| if (signal_pending_state(state, current)) { |
| ret = -EINTR; |
| break; |
| } |
| |
| if (build_ww_mutex() && ww_ctx) { |
| ret = __ww_mutex_check_kill(rtm, waiter, ww_ctx); |
| if (ret) |
| break; |
| } |
| |
| if (waiter == rt_mutex_top_waiter(lock)) |
| owner = rt_mutex_owner(lock); |
| else |
| owner = NULL; |
| raw_spin_unlock_irq(&lock->wait_lock); |
| |
| if (!owner || !rtmutex_spin_on_owner(lock, waiter, owner)) |
| rt_mutex_schedule(); |
| |
| raw_spin_lock_irq(&lock->wait_lock); |
| set_current_state(state); |
| } |
| |
| __set_current_state(TASK_RUNNING); |
| return ret; |
| } |
| |
| static void __sched rt_mutex_handle_deadlock(int res, int detect_deadlock, |
| struct rt_mutex_waiter *w) |
| { |
| /* |
| * If the result is not -EDEADLOCK or the caller requested |
| * deadlock detection, nothing to do here. |
| */ |
| if (res != -EDEADLOCK || detect_deadlock) |
| return; |
| |
| if (build_ww_mutex() && w->ww_ctx) |
| return; |
| |
| /* |
| * Yell loudly and stop the task right here. |
| */ |
| WARN(1, "rtmutex deadlock detected\n"); |
| while (1) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| rt_mutex_schedule(); |
| } |
| } |
| |
| /** |
| * __rt_mutex_slowlock - Locking slowpath invoked with lock::wait_lock held |
| * @lock: The rtmutex to block lock |
| * @ww_ctx: WW mutex context pointer |
| * @state: The task state for sleeping |
| * @chwalk: Indicator whether full or partial chainwalk is requested |
| * @waiter: Initializer waiter for blocking |
| */ |
| static int __sched __rt_mutex_slowlock(struct rt_mutex_base *lock, |
| struct ww_acquire_ctx *ww_ctx, |
| unsigned int state, |
| enum rtmutex_chainwalk chwalk, |
| struct rt_mutex_waiter *waiter) |
| { |
| struct rt_mutex *rtm = container_of(lock, struct rt_mutex, rtmutex); |
| struct ww_mutex *ww = ww_container_of(rtm); |
| int ret; |
| |
| lockdep_assert_held(&lock->wait_lock); |
| |
| /* Try to acquire the lock again: */ |
| if (try_to_take_rt_mutex(lock, current, NULL)) { |
| if (build_ww_mutex() && ww_ctx) { |
| __ww_mutex_check_waiters(rtm, ww_ctx); |
| ww_mutex_lock_acquired(ww, ww_ctx); |
| } |
| return 0; |
| } |
| |
| set_current_state(state); |
| |
| trace_contention_begin(lock, LCB_F_RT); |
| |
| ret = task_blocks_on_rt_mutex(lock, waiter, current, ww_ctx, chwalk); |
| if (likely(!ret)) |
| ret = rt_mutex_slowlock_block(lock, ww_ctx, state, NULL, waiter); |
| |
| if (likely(!ret)) { |
| /* acquired the lock */ |
| if (build_ww_mutex() && ww_ctx) { |
| if (!ww_ctx->is_wait_die) |
| __ww_mutex_check_waiters(rtm, ww_ctx); |
| ww_mutex_lock_acquired(ww, ww_ctx); |
| } |
| } else { |
| __set_current_state(TASK_RUNNING); |
| remove_waiter(lock, waiter); |
| rt_mutex_handle_deadlock(ret, chwalk, waiter); |
| } |
| |
| /* |
| * try_to_take_rt_mutex() sets the waiter bit |
| * unconditionally. We might have to fix that up. |
| */ |
| fixup_rt_mutex_waiters(lock, true); |
| |
| trace_contention_end(lock, ret); |
| |
| return ret; |
| } |
| |
| static inline int __rt_mutex_slowlock_locked(struct rt_mutex_base *lock, |
| struct ww_acquire_ctx *ww_ctx, |
| unsigned int state) |
| { |
| struct rt_mutex_waiter waiter; |
| int ret; |
| |
| rt_mutex_init_waiter(&waiter); |
| waiter.ww_ctx = ww_ctx; |
| |
| ret = __rt_mutex_slowlock(lock, ww_ctx, state, RT_MUTEX_MIN_CHAINWALK, |
| &waiter); |
| |
| debug_rt_mutex_free_waiter(&waiter); |
| return ret; |
| } |
| |
| /* |
| * rt_mutex_slowlock - Locking slowpath invoked when fast path fails |
| * @lock: The rtmutex to block lock |
| * @ww_ctx: WW mutex context pointer |
| * @state: The task state for sleeping |
| */ |
| static int __sched rt_mutex_slowlock(struct rt_mutex_base *lock, |
| struct ww_acquire_ctx *ww_ctx, |
| unsigned int state) |
| { |
| unsigned long flags; |
| int ret; |
| |
| /* |
| * Do all pre-schedule work here, before we queue a waiter and invoke |
| * PI -- any such work that trips on rtlock (PREEMPT_RT spinlock) would |
| * otherwise recurse back into task_blocks_on_rt_mutex() through |
| * rtlock_slowlock() and will then enqueue a second waiter for this |
| * same task and things get really confusing real fast. |
| */ |
| rt_mutex_pre_schedule(); |
| |
| /* |
| * Technically we could use raw_spin_[un]lock_irq() here, but this can |
| * be called in early boot if the cmpxchg() fast path is disabled |
| * (debug, no architecture support). In this case we will acquire the |
| * rtmutex with lock->wait_lock held. But we cannot unconditionally |
| * enable interrupts in that early boot case. So we need to use the |
| * irqsave/restore variants. |
| */ |
| raw_spin_lock_irqsave(&lock->wait_lock, flags); |
| ret = __rt_mutex_slowlock_locked(lock, ww_ctx, state); |
| raw_spin_unlock_irqrestore(&lock->wait_lock, flags); |
| rt_mutex_post_schedule(); |
| |
| return ret; |
| } |
| |
| static __always_inline int __rt_mutex_lock(struct rt_mutex_base *lock, |
| unsigned int state) |
| { |
| lockdep_assert(!current->pi_blocked_on); |
| |
| if (likely(rt_mutex_try_acquire(lock))) |
| return 0; |
| |
| return rt_mutex_slowlock(lock, NULL, state); |
| } |
| #endif /* RT_MUTEX_BUILD_MUTEX */ |
| |
| #ifdef RT_MUTEX_BUILD_SPINLOCKS |
| /* |
| * Functions required for spin/rw_lock substitution on RT kernels |
| */ |
| |
| /** |
| * rtlock_slowlock_locked - Slow path lock acquisition for RT locks |
| * @lock: The underlying RT mutex |
| */ |
| static void __sched rtlock_slowlock_locked(struct rt_mutex_base *lock) |
| { |
| struct rt_mutex_waiter waiter; |
| struct task_struct *owner; |
| |
| lockdep_assert_held(&lock->wait_lock); |
| |
| if (try_to_take_rt_mutex(lock, current, NULL)) |
| return; |
| |
| rt_mutex_init_rtlock_waiter(&waiter); |
| |
| /* Save current state and set state to TASK_RTLOCK_WAIT */ |
| current_save_and_set_rtlock_wait_state(); |
| |
| trace_contention_begin(lock, LCB_F_RT); |
| |
| task_blocks_on_rt_mutex(lock, &waiter, current, NULL, RT_MUTEX_MIN_CHAINWALK); |
| |
| for (;;) { |
| /* Try to acquire the lock again */ |
| if (try_to_take_rt_mutex(lock, current, &waiter)) |
| break; |
| |
| if (&waiter == rt_mutex_top_waiter(lock)) |
| owner = rt_mutex_owner(lock); |
| else |
| owner = NULL; |
| raw_spin_unlock_irq(&lock->wait_lock); |
| |
| if (!owner || !rtmutex_spin_on_owner(lock, &waiter, owner)) |
| schedule_rtlock(); |
| |
| raw_spin_lock_irq(&lock->wait_lock); |
| set_current_state(TASK_RTLOCK_WAIT); |
| } |
| |
| /* Restore the task state */ |
| current_restore_rtlock_saved_state(); |
| |
| /* |
| * try_to_take_rt_mutex() sets the waiter bit unconditionally. |
| * We might have to fix that up: |
| */ |
| fixup_rt_mutex_waiters(lock, true); |
| debug_rt_mutex_free_waiter(&waiter); |
| |
| trace_contention_end(lock, 0); |
| } |
| |
| static __always_inline void __sched rtlock_slowlock(struct rt_mutex_base *lock) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&lock->wait_lock, flags); |
| rtlock_slowlock_locked(lock); |
| raw_spin_unlock_irqrestore(&lock->wait_lock, flags); |
| } |
| |
| #endif /* RT_MUTEX_BUILD_SPINLOCKS */ |