| /* |
| * s3c24xx-i2s.c -- ALSA Soc Audio Layer |
| * |
| * (c) 2006 Wolfson Microelectronics PLC. |
| * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com |
| * |
| * Copyright 2004-2005 Simtec Electronics |
| * http://armlinux.simtec.co.uk/ |
| * Ben Dooks <ben@simtec.co.uk> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <linux/module.h> |
| |
| #include <sound/soc.h> |
| #include <sound/pcm_params.h> |
| |
| #include <mach/dma.h> |
| #include <plat/regs-iis.h> |
| |
| #include "dma.h" |
| #include "s3c24xx-i2s.h" |
| |
| static struct s3c2410_dma_client s3c24xx_dma_client_out = { |
| .name = "I2S PCM Stereo out" |
| }; |
| |
| static struct s3c2410_dma_client s3c24xx_dma_client_in = { |
| .name = "I2S PCM Stereo in" |
| }; |
| |
| static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_out = { |
| .client = &s3c24xx_dma_client_out, |
| .channel = DMACH_I2S_OUT, |
| .dma_addr = S3C2410_PA_IIS + S3C2410_IISFIFO, |
| .dma_size = 2, |
| }; |
| |
| static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_in = { |
| .client = &s3c24xx_dma_client_in, |
| .channel = DMACH_I2S_IN, |
| .dma_addr = S3C2410_PA_IIS + S3C2410_IISFIFO, |
| .dma_size = 2, |
| }; |
| |
| struct s3c24xx_i2s_info { |
| void __iomem *regs; |
| struct clk *iis_clk; |
| u32 iiscon; |
| u32 iismod; |
| u32 iisfcon; |
| u32 iispsr; |
| }; |
| static struct s3c24xx_i2s_info s3c24xx_i2s; |
| |
| static void s3c24xx_snd_txctrl(int on) |
| { |
| u32 iisfcon; |
| u32 iiscon; |
| u32 iismod; |
| |
| pr_debug("Entered %s\n", __func__); |
| |
| iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); |
| iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); |
| iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); |
| |
| pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon); |
| |
| if (on) { |
| iisfcon |= S3C2410_IISFCON_TXDMA | S3C2410_IISFCON_TXENABLE; |
| iiscon |= S3C2410_IISCON_TXDMAEN | S3C2410_IISCON_IISEN; |
| iiscon &= ~S3C2410_IISCON_TXIDLE; |
| iismod |= S3C2410_IISMOD_TXMODE; |
| |
| writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); |
| writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); |
| writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); |
| } else { |
| /* note, we have to disable the FIFOs otherwise bad things |
| * seem to happen when the DMA stops. According to the |
| * Samsung supplied kernel, this should allow the DMA |
| * engine and FIFOs to reset. If this isn't allowed, the |
| * DMA engine will simply freeze randomly. |
| */ |
| |
| iisfcon &= ~S3C2410_IISFCON_TXENABLE; |
| iisfcon &= ~S3C2410_IISFCON_TXDMA; |
| iiscon |= S3C2410_IISCON_TXIDLE; |
| iiscon &= ~S3C2410_IISCON_TXDMAEN; |
| iismod &= ~S3C2410_IISMOD_TXMODE; |
| |
| writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); |
| writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); |
| writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); |
| } |
| |
| pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon); |
| } |
| |
| static void s3c24xx_snd_rxctrl(int on) |
| { |
| u32 iisfcon; |
| u32 iiscon; |
| u32 iismod; |
| |
| pr_debug("Entered %s\n", __func__); |
| |
| iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); |
| iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); |
| iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); |
| |
| pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon); |
| |
| if (on) { |
| iisfcon |= S3C2410_IISFCON_RXDMA | S3C2410_IISFCON_RXENABLE; |
| iiscon |= S3C2410_IISCON_RXDMAEN | S3C2410_IISCON_IISEN; |
| iiscon &= ~S3C2410_IISCON_RXIDLE; |
| iismod |= S3C2410_IISMOD_RXMODE; |
| |
| writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); |
| writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); |
| writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); |
| } else { |
| /* note, we have to disable the FIFOs otherwise bad things |
| * seem to happen when the DMA stops. According to the |
| * Samsung supplied kernel, this should allow the DMA |
| * engine and FIFOs to reset. If this isn't allowed, the |
| * DMA engine will simply freeze randomly. |
| */ |
| |
| iisfcon &= ~S3C2410_IISFCON_RXENABLE; |
| iisfcon &= ~S3C2410_IISFCON_RXDMA; |
| iiscon |= S3C2410_IISCON_RXIDLE; |
| iiscon &= ~S3C2410_IISCON_RXDMAEN; |
| iismod &= ~S3C2410_IISMOD_RXMODE; |
| |
| writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); |
| writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); |
| writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); |
| } |
| |
| pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon); |
| } |
| |
| /* |
| * Wait for the LR signal to allow synchronisation to the L/R clock |
| * from the codec. May only be needed for slave mode. |
| */ |
| static int s3c24xx_snd_lrsync(void) |
| { |
| u32 iiscon; |
| int timeout = 50; /* 5ms */ |
| |
| pr_debug("Entered %s\n", __func__); |
| |
| while (1) { |
| iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); |
| if (iiscon & S3C2410_IISCON_LRINDEX) |
| break; |
| |
| if (!timeout--) |
| return -ETIMEDOUT; |
| udelay(100); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Check whether CPU is the master or slave |
| */ |
| static inline int s3c24xx_snd_is_clkmaster(void) |
| { |
| pr_debug("Entered %s\n", __func__); |
| |
| return (readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & S3C2410_IISMOD_SLAVE) ? 0:1; |
| } |
| |
| /* |
| * Set S3C24xx I2S DAI format |
| */ |
| static int s3c24xx_i2s_set_fmt(struct snd_soc_dai *cpu_dai, |
| unsigned int fmt) |
| { |
| u32 iismod; |
| |
| pr_debug("Entered %s\n", __func__); |
| |
| iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); |
| pr_debug("hw_params r: IISMOD: %x \n", iismod); |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| iismod |= S3C2410_IISMOD_SLAVE; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFS: |
| iismod &= ~S3C2410_IISMOD_SLAVE; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_LEFT_J: |
| iismod |= S3C2410_IISMOD_MSB; |
| break; |
| case SND_SOC_DAIFMT_I2S: |
| iismod &= ~S3C2410_IISMOD_MSB; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); |
| pr_debug("hw_params w: IISMOD: %x \n", iismod); |
| return 0; |
| } |
| |
| static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct s3c_dma_params *dma_data; |
| u32 iismod; |
| |
| pr_debug("Entered %s\n", __func__); |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| dma_data = &s3c24xx_i2s_pcm_stereo_out; |
| else |
| dma_data = &s3c24xx_i2s_pcm_stereo_in; |
| |
| snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data); |
| |
| /* Working copies of register */ |
| iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); |
| pr_debug("hw_params r: IISMOD: %x\n", iismod); |
| |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S8: |
| iismod &= ~S3C2410_IISMOD_16BIT; |
| dma_data->dma_size = 1; |
| break; |
| case SNDRV_PCM_FORMAT_S16_LE: |
| iismod |= S3C2410_IISMOD_16BIT; |
| dma_data->dma_size = 2; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); |
| pr_debug("hw_params w: IISMOD: %x\n", iismod); |
| return 0; |
| } |
| |
| static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd, |
| struct snd_soc_dai *dai) |
| { |
| int ret = 0; |
| struct s3c_dma_params *dma_data = |
| snd_soc_dai_get_dma_data(dai, substream); |
| |
| pr_debug("Entered %s\n", __func__); |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| case SNDRV_PCM_TRIGGER_RESUME: |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| if (!s3c24xx_snd_is_clkmaster()) { |
| ret = s3c24xx_snd_lrsync(); |
| if (ret) |
| goto exit_err; |
| } |
| |
| if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) |
| s3c24xx_snd_rxctrl(1); |
| else |
| s3c24xx_snd_txctrl(1); |
| |
| s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED); |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) |
| s3c24xx_snd_rxctrl(0); |
| else |
| s3c24xx_snd_txctrl(0); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| exit_err: |
| return ret; |
| } |
| |
| /* |
| * Set S3C24xx Clock source |
| */ |
| static int s3c24xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| u32 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); |
| |
| pr_debug("Entered %s\n", __func__); |
| |
| iismod &= ~S3C2440_IISMOD_MPLL; |
| |
| switch (clk_id) { |
| case S3C24XX_CLKSRC_PCLK: |
| break; |
| case S3C24XX_CLKSRC_MPLL: |
| iismod |= S3C2440_IISMOD_MPLL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); |
| return 0; |
| } |
| |
| /* |
| * Set S3C24xx Clock dividers |
| */ |
| static int s3c24xx_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai, |
| int div_id, int div) |
| { |
| u32 reg; |
| |
| pr_debug("Entered %s\n", __func__); |
| |
| switch (div_id) { |
| case S3C24XX_DIV_BCLK: |
| reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~S3C2410_IISMOD_FS_MASK; |
| writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD); |
| break; |
| case S3C24XX_DIV_MCLK: |
| reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~(S3C2410_IISMOD_384FS); |
| writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD); |
| break; |
| case S3C24XX_DIV_PRESCALER: |
| writel(div, s3c24xx_i2s.regs + S3C2410_IISPSR); |
| reg = readl(s3c24xx_i2s.regs + S3C2410_IISCON); |
| writel(reg | S3C2410_IISCON_PSCEN, s3c24xx_i2s.regs + S3C2410_IISCON); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * To avoid duplicating clock code, allow machine driver to |
| * get the clockrate from here. |
| */ |
| u32 s3c24xx_i2s_get_clockrate(void) |
| { |
| return clk_get_rate(s3c24xx_i2s.iis_clk); |
| } |
| EXPORT_SYMBOL_GPL(s3c24xx_i2s_get_clockrate); |
| |
| static int s3c24xx_i2s_probe(struct snd_soc_dai *dai) |
| { |
| pr_debug("Entered %s\n", __func__); |
| |
| s3c24xx_i2s.regs = ioremap(S3C2410_PA_IIS, 0x100); |
| if (s3c24xx_i2s.regs == NULL) |
| return -ENXIO; |
| |
| s3c24xx_i2s.iis_clk = clk_get(dai->dev, "iis"); |
| if (IS_ERR(s3c24xx_i2s.iis_clk)) { |
| pr_err("failed to get iis_clock\n"); |
| iounmap(s3c24xx_i2s.regs); |
| return PTR_ERR(s3c24xx_i2s.iis_clk); |
| } |
| clk_enable(s3c24xx_i2s.iis_clk); |
| |
| /* Configure the I2S pins (GPE0...GPE4) in correct mode */ |
| s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), |
| S3C_GPIO_PULL_NONE); |
| |
| writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON); |
| |
| s3c24xx_snd_txctrl(0); |
| s3c24xx_snd_rxctrl(0); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai) |
| { |
| pr_debug("Entered %s\n", __func__); |
| |
| s3c24xx_i2s.iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON); |
| s3c24xx_i2s.iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD); |
| s3c24xx_i2s.iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON); |
| s3c24xx_i2s.iispsr = readl(s3c24xx_i2s.regs + S3C2410_IISPSR); |
| |
| clk_disable(s3c24xx_i2s.iis_clk); |
| |
| return 0; |
| } |
| |
| static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai) |
| { |
| pr_debug("Entered %s\n", __func__); |
| clk_enable(s3c24xx_i2s.iis_clk); |
| |
| writel(s3c24xx_i2s.iiscon, s3c24xx_i2s.regs + S3C2410_IISCON); |
| writel(s3c24xx_i2s.iismod, s3c24xx_i2s.regs + S3C2410_IISMOD); |
| writel(s3c24xx_i2s.iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON); |
| writel(s3c24xx_i2s.iispsr, s3c24xx_i2s.regs + S3C2410_IISPSR); |
| |
| return 0; |
| } |
| #else |
| #define s3c24xx_i2s_suspend NULL |
| #define s3c24xx_i2s_resume NULL |
| #endif |
| |
| |
| #define S3C24XX_I2S_RATES \ |
| (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ |
| SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ |
| SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) |
| |
| static const struct snd_soc_dai_ops s3c24xx_i2s_dai_ops = { |
| .trigger = s3c24xx_i2s_trigger, |
| .hw_params = s3c24xx_i2s_hw_params, |
| .set_fmt = s3c24xx_i2s_set_fmt, |
| .set_clkdiv = s3c24xx_i2s_set_clkdiv, |
| .set_sysclk = s3c24xx_i2s_set_sysclk, |
| }; |
| |
| static struct snd_soc_dai_driver s3c24xx_i2s_dai = { |
| .probe = s3c24xx_i2s_probe, |
| .suspend = s3c24xx_i2s_suspend, |
| .resume = s3c24xx_i2s_resume, |
| .playback = { |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = S3C24XX_I2S_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,}, |
| .capture = { |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = S3C24XX_I2S_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,}, |
| .ops = &s3c24xx_i2s_dai_ops, |
| }; |
| |
| static __devinit int s3c24xx_iis_dev_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| |
| ret = s3c_i2sv2_register_dai(&pdev->dev, -1, &s3c2412_i2s_dai); |
| if (ret) { |
| pr_err("failed to register the dai\n"); |
| return ret; |
| } |
| |
| ret = asoc_dma_platform_register(&pdev->dev); |
| if (ret) { |
| pr_err("failed to register the dma: %d\n", ret); |
| goto err; |
| } |
| |
| return 0; |
| err: |
| snd_soc_unregister_dai(&pdev->dev); |
| return ret; |
| } |
| |
| static __devexit int s3c24xx_iis_dev_remove(struct platform_device *pdev) |
| { |
| asoc_dma_platform_unregister(&pdev->dev); |
| snd_soc_unregister_dai(&pdev->dev); |
| return 0; |
| } |
| |
| static struct platform_driver s3c24xx_iis_driver = { |
| .probe = s3c24xx_iis_dev_probe, |
| .remove = __devexit_p(s3c24xx_iis_dev_remove), |
| .driver = { |
| .name = "s3c24xx-iis", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| module_platform_driver(s3c24xx_iis_driver); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>"); |
| MODULE_DESCRIPTION("s3c24xx I2S SoC Interface"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:s3c24xx-iis"); |