| /* |
| * Blackfin On-Chip MAC Driver |
| * |
| * Copyright 2004-2010 Analog Devices Inc. |
| * |
| * Enter bugs at http://blackfin.uclinux.org/ |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #define DRV_VERSION "1.1" |
| #define DRV_DESC "Blackfin on-chip Ethernet MAC driver" |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/timer.h> |
| #include <linux/errno.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/crc32.h> |
| #include <linux/device.h> |
| #include <linux/spinlock.h> |
| #include <linux/mii.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/skbuff.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/dma.h> |
| #include <linux/dma-mapping.h> |
| |
| #include <asm/div64.h> |
| #include <asm/dpmc.h> |
| #include <asm/blackfin.h> |
| #include <asm/cacheflush.h> |
| #include <asm/portmux.h> |
| #include <mach/pll.h> |
| |
| #include "bfin_mac.h" |
| |
| MODULE_AUTHOR("Bryan Wu, Luke Yang"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION(DRV_DESC); |
| MODULE_ALIAS("platform:bfin_mac"); |
| |
| #if defined(CONFIG_BFIN_MAC_USE_L1) |
| # define bfin_mac_alloc(dma_handle, size, num) l1_data_sram_zalloc(size*num) |
| # define bfin_mac_free(dma_handle, ptr, num) l1_data_sram_free(ptr) |
| #else |
| # define bfin_mac_alloc(dma_handle, size, num) \ |
| dma_alloc_coherent(NULL, size*num, dma_handle, GFP_KERNEL) |
| # define bfin_mac_free(dma_handle, ptr, num) \ |
| dma_free_coherent(NULL, sizeof(*ptr)*num, ptr, dma_handle) |
| #endif |
| |
| #define PKT_BUF_SZ 1580 |
| |
| #define MAX_TIMEOUT_CNT 500 |
| |
| /* pointers to maintain transmit list */ |
| static struct net_dma_desc_tx *tx_list_head; |
| static struct net_dma_desc_tx *tx_list_tail; |
| static struct net_dma_desc_rx *rx_list_head; |
| static struct net_dma_desc_rx *rx_list_tail; |
| static struct net_dma_desc_rx *current_rx_ptr; |
| static struct net_dma_desc_tx *current_tx_ptr; |
| static struct net_dma_desc_tx *tx_desc; |
| static struct net_dma_desc_rx *rx_desc; |
| |
| static void desc_list_free(void) |
| { |
| struct net_dma_desc_rx *r; |
| struct net_dma_desc_tx *t; |
| int i; |
| #if !defined(CONFIG_BFIN_MAC_USE_L1) |
| dma_addr_t dma_handle = 0; |
| #endif |
| |
| if (tx_desc) { |
| t = tx_list_head; |
| for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) { |
| if (t) { |
| if (t->skb) { |
| dev_kfree_skb(t->skb); |
| t->skb = NULL; |
| } |
| t = t->next; |
| } |
| } |
| bfin_mac_free(dma_handle, tx_desc, CONFIG_BFIN_TX_DESC_NUM); |
| } |
| |
| if (rx_desc) { |
| r = rx_list_head; |
| for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) { |
| if (r) { |
| if (r->skb) { |
| dev_kfree_skb(r->skb); |
| r->skb = NULL; |
| } |
| r = r->next; |
| } |
| } |
| bfin_mac_free(dma_handle, rx_desc, CONFIG_BFIN_RX_DESC_NUM); |
| } |
| } |
| |
| static int desc_list_init(struct net_device *dev) |
| { |
| int i; |
| struct sk_buff *new_skb; |
| #if !defined(CONFIG_BFIN_MAC_USE_L1) |
| /* |
| * This dma_handle is useless in Blackfin dma_alloc_coherent(). |
| * The real dma handler is the return value of dma_alloc_coherent(). |
| */ |
| dma_addr_t dma_handle; |
| #endif |
| |
| tx_desc = bfin_mac_alloc(&dma_handle, |
| sizeof(struct net_dma_desc_tx), |
| CONFIG_BFIN_TX_DESC_NUM); |
| if (tx_desc == NULL) |
| goto init_error; |
| |
| rx_desc = bfin_mac_alloc(&dma_handle, |
| sizeof(struct net_dma_desc_rx), |
| CONFIG_BFIN_RX_DESC_NUM); |
| if (rx_desc == NULL) |
| goto init_error; |
| |
| /* init tx_list */ |
| tx_list_head = tx_list_tail = tx_desc; |
| |
| for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) { |
| struct net_dma_desc_tx *t = tx_desc + i; |
| struct dma_descriptor *a = &(t->desc_a); |
| struct dma_descriptor *b = &(t->desc_b); |
| |
| /* |
| * disable DMA |
| * read from memory WNR = 0 |
| * wordsize is 32 bits |
| * 6 half words is desc size |
| * large desc flow |
| */ |
| a->config = WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE; |
| a->start_addr = (unsigned long)t->packet; |
| a->x_count = 0; |
| a->next_dma_desc = b; |
| |
| /* |
| * enabled DMA |
| * write to memory WNR = 1 |
| * wordsize is 32 bits |
| * disable interrupt |
| * 6 half words is desc size |
| * large desc flow |
| */ |
| b->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE; |
| b->start_addr = (unsigned long)(&(t->status)); |
| b->x_count = 0; |
| |
| t->skb = NULL; |
| tx_list_tail->desc_b.next_dma_desc = a; |
| tx_list_tail->next = t; |
| tx_list_tail = t; |
| } |
| tx_list_tail->next = tx_list_head; /* tx_list is a circle */ |
| tx_list_tail->desc_b.next_dma_desc = &(tx_list_head->desc_a); |
| current_tx_ptr = tx_list_head; |
| |
| /* init rx_list */ |
| rx_list_head = rx_list_tail = rx_desc; |
| |
| for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) { |
| struct net_dma_desc_rx *r = rx_desc + i; |
| struct dma_descriptor *a = &(r->desc_a); |
| struct dma_descriptor *b = &(r->desc_b); |
| |
| /* allocate a new skb for next time receive */ |
| new_skb = netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN); |
| if (!new_skb) |
| goto init_error; |
| |
| skb_reserve(new_skb, NET_IP_ALIGN); |
| /* Invalidate the data cache of skb->data range when it is write back |
| * cache. It will prevent overwriting the new data from DMA |
| */ |
| blackfin_dcache_invalidate_range((unsigned long)new_skb->head, |
| (unsigned long)new_skb->end); |
| r->skb = new_skb; |
| |
| /* |
| * enabled DMA |
| * write to memory WNR = 1 |
| * wordsize is 32 bits |
| * disable interrupt |
| * 6 half words is desc size |
| * large desc flow |
| */ |
| a->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE; |
| /* since RXDWA is enabled */ |
| a->start_addr = (unsigned long)new_skb->data - 2; |
| a->x_count = 0; |
| a->next_dma_desc = b; |
| |
| /* |
| * enabled DMA |
| * write to memory WNR = 1 |
| * wordsize is 32 bits |
| * enable interrupt |
| * 6 half words is desc size |
| * large desc flow |
| */ |
| b->config = DMAEN | WNR | WDSIZE_32 | DI_EN | |
| NDSIZE_6 | DMAFLOW_LARGE; |
| b->start_addr = (unsigned long)(&(r->status)); |
| b->x_count = 0; |
| |
| rx_list_tail->desc_b.next_dma_desc = a; |
| rx_list_tail->next = r; |
| rx_list_tail = r; |
| } |
| rx_list_tail->next = rx_list_head; /* rx_list is a circle */ |
| rx_list_tail->desc_b.next_dma_desc = &(rx_list_head->desc_a); |
| current_rx_ptr = rx_list_head; |
| |
| return 0; |
| |
| init_error: |
| desc_list_free(); |
| pr_err("kmalloc failed\n"); |
| return -ENOMEM; |
| } |
| |
| |
| /*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/ |
| |
| /* |
| * MII operations |
| */ |
| /* Wait until the previous MDC/MDIO transaction has completed */ |
| static int bfin_mdio_poll(void) |
| { |
| int timeout_cnt = MAX_TIMEOUT_CNT; |
| |
| /* poll the STABUSY bit */ |
| while ((bfin_read_EMAC_STAADD()) & STABUSY) { |
| udelay(1); |
| if (timeout_cnt-- < 0) { |
| pr_err("wait MDC/MDIO transaction to complete timeout\n"); |
| return -ETIMEDOUT; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* Read an off-chip register in a PHY through the MDC/MDIO port */ |
| static int bfin_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) |
| { |
| int ret; |
| |
| ret = bfin_mdio_poll(); |
| if (ret) |
| return ret; |
| |
| /* read mode */ |
| bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) | |
| SET_REGAD((u16) regnum) | |
| STABUSY); |
| |
| ret = bfin_mdio_poll(); |
| if (ret) |
| return ret; |
| |
| return (int) bfin_read_EMAC_STADAT(); |
| } |
| |
| /* Write an off-chip register in a PHY through the MDC/MDIO port */ |
| static int bfin_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, |
| u16 value) |
| { |
| int ret; |
| |
| ret = bfin_mdio_poll(); |
| if (ret) |
| return ret; |
| |
| bfin_write_EMAC_STADAT((u32) value); |
| |
| /* write mode */ |
| bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) | |
| SET_REGAD((u16) regnum) | |
| STAOP | |
| STABUSY); |
| |
| return bfin_mdio_poll(); |
| } |
| |
| static void bfin_mac_adjust_link(struct net_device *dev) |
| { |
| struct bfin_mac_local *lp = netdev_priv(dev); |
| struct phy_device *phydev = dev->phydev; |
| unsigned long flags; |
| int new_state = 0; |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| if (phydev->link) { |
| /* Now we make sure that we can be in full duplex mode. |
| * If not, we operate in half-duplex mode. */ |
| if (phydev->duplex != lp->old_duplex) { |
| u32 opmode = bfin_read_EMAC_OPMODE(); |
| new_state = 1; |
| |
| if (phydev->duplex) |
| opmode |= FDMODE; |
| else |
| opmode &= ~(FDMODE); |
| |
| bfin_write_EMAC_OPMODE(opmode); |
| lp->old_duplex = phydev->duplex; |
| } |
| |
| if (phydev->speed != lp->old_speed) { |
| if (phydev->interface == PHY_INTERFACE_MODE_RMII) { |
| u32 opmode = bfin_read_EMAC_OPMODE(); |
| switch (phydev->speed) { |
| case 10: |
| opmode |= RMII_10; |
| break; |
| case 100: |
| opmode &= ~RMII_10; |
| break; |
| default: |
| netdev_warn(dev, |
| "Ack! Speed (%d) is not 10/100!\n", |
| phydev->speed); |
| break; |
| } |
| bfin_write_EMAC_OPMODE(opmode); |
| } |
| |
| new_state = 1; |
| lp->old_speed = phydev->speed; |
| } |
| |
| if (!lp->old_link) { |
| new_state = 1; |
| lp->old_link = 1; |
| } |
| } else if (lp->old_link) { |
| new_state = 1; |
| lp->old_link = 0; |
| lp->old_speed = 0; |
| lp->old_duplex = -1; |
| } |
| |
| if (new_state) { |
| u32 opmode = bfin_read_EMAC_OPMODE(); |
| phy_print_status(phydev); |
| pr_debug("EMAC_OPMODE = 0x%08x\n", opmode); |
| } |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| /* MDC = 2.5 MHz */ |
| #define MDC_CLK 2500000 |
| |
| static int mii_probe(struct net_device *dev, int phy_mode) |
| { |
| struct bfin_mac_local *lp = netdev_priv(dev); |
| struct phy_device *phydev; |
| unsigned short sysctl; |
| u32 sclk, mdc_div; |
| |
| /* Enable PHY output early */ |
| if (!(bfin_read_VR_CTL() & CLKBUFOE)) |
| bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE); |
| |
| sclk = get_sclk(); |
| mdc_div = ((sclk / MDC_CLK) / 2) - 1; |
| |
| sysctl = bfin_read_EMAC_SYSCTL(); |
| sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div); |
| bfin_write_EMAC_SYSCTL(sysctl); |
| |
| phydev = phy_find_first(lp->mii_bus); |
| if (!phydev) { |
| netdev_err(dev, "no phy device found\n"); |
| return -ENODEV; |
| } |
| |
| if (phy_mode != PHY_INTERFACE_MODE_RMII && |
| phy_mode != PHY_INTERFACE_MODE_MII) { |
| netdev_err(dev, "invalid phy interface mode\n"); |
| return -EINVAL; |
| } |
| |
| phydev = phy_connect(dev, phydev_name(phydev), |
| &bfin_mac_adjust_link, phy_mode); |
| |
| if (IS_ERR(phydev)) { |
| netdev_err(dev, "could not attach PHY\n"); |
| return PTR_ERR(phydev); |
| } |
| |
| /* mask with MAC supported features */ |
| phydev->supported &= (SUPPORTED_10baseT_Half |
| | SUPPORTED_10baseT_Full |
| | SUPPORTED_100baseT_Half |
| | SUPPORTED_100baseT_Full |
| | SUPPORTED_Autoneg |
| | SUPPORTED_Pause | SUPPORTED_Asym_Pause |
| | SUPPORTED_MII |
| | SUPPORTED_TP); |
| |
| phydev->advertising = phydev->supported; |
| |
| lp->old_link = 0; |
| lp->old_speed = 0; |
| lp->old_duplex = -1; |
| |
| phy_attached_print(phydev, "mdc_clk=%dHz(mdc_div=%d)@sclk=%dMHz)\n", |
| MDC_CLK, mdc_div, sclk / 1000000); |
| |
| return 0; |
| } |
| |
| /* |
| * Ethtool support |
| */ |
| |
| /* |
| * interrupt routine for magic packet wakeup |
| */ |
| static irqreturn_t bfin_mac_wake_interrupt(int irq, void *dev_id) |
| { |
| return IRQ_HANDLED; |
| } |
| |
| static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); |
| strlcpy(info->version, DRV_VERSION, sizeof(info->version)); |
| strlcpy(info->fw_version, "N/A", sizeof(info->fw_version)); |
| strlcpy(info->bus_info, dev_name(&dev->dev), sizeof(info->bus_info)); |
| } |
| |
| static void bfin_mac_ethtool_getwol(struct net_device *dev, |
| struct ethtool_wolinfo *wolinfo) |
| { |
| struct bfin_mac_local *lp = netdev_priv(dev); |
| |
| wolinfo->supported = WAKE_MAGIC; |
| wolinfo->wolopts = lp->wol; |
| } |
| |
| static int bfin_mac_ethtool_setwol(struct net_device *dev, |
| struct ethtool_wolinfo *wolinfo) |
| { |
| struct bfin_mac_local *lp = netdev_priv(dev); |
| int rc; |
| |
| if (wolinfo->wolopts & (WAKE_MAGICSECURE | |
| WAKE_UCAST | |
| WAKE_MCAST | |
| WAKE_BCAST | |
| WAKE_ARP)) |
| return -EOPNOTSUPP; |
| |
| lp->wol = wolinfo->wolopts; |
| |
| if (lp->wol && !lp->irq_wake_requested) { |
| /* register wake irq handler */ |
| rc = request_irq(IRQ_MAC_WAKEDET, bfin_mac_wake_interrupt, |
| 0, "EMAC_WAKE", dev); |
| if (rc) |
| return rc; |
| lp->irq_wake_requested = true; |
| } |
| |
| if (!lp->wol && lp->irq_wake_requested) { |
| free_irq(IRQ_MAC_WAKEDET, dev); |
| lp->irq_wake_requested = false; |
| } |
| |
| /* Make sure the PHY driver doesn't suspend */ |
| device_init_wakeup(&dev->dev, lp->wol); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_BFIN_MAC_USE_HWSTAMP |
| static int bfin_mac_ethtool_get_ts_info(struct net_device *dev, |
| struct ethtool_ts_info *info) |
| { |
| struct bfin_mac_local *lp = netdev_priv(dev); |
| |
| info->so_timestamping = |
| SOF_TIMESTAMPING_TX_HARDWARE | |
| SOF_TIMESTAMPING_RX_HARDWARE | |
| SOF_TIMESTAMPING_RAW_HARDWARE; |
| info->phc_index = lp->phc_index; |
| info->tx_types = |
| (1 << HWTSTAMP_TX_OFF) | |
| (1 << HWTSTAMP_TX_ON); |
| info->rx_filters = |
| (1 << HWTSTAMP_FILTER_NONE) | |
| (1 << HWTSTAMP_FILTER_PTP_V1_L4_EVENT) | |
| (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) | |
| (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT); |
| return 0; |
| } |
| #endif |
| |
| static const struct ethtool_ops bfin_mac_ethtool_ops = { |
| .get_link = ethtool_op_get_link, |
| .get_drvinfo = bfin_mac_ethtool_getdrvinfo, |
| .get_wol = bfin_mac_ethtool_getwol, |
| .set_wol = bfin_mac_ethtool_setwol, |
| #ifdef CONFIG_BFIN_MAC_USE_HWSTAMP |
| .get_ts_info = bfin_mac_ethtool_get_ts_info, |
| #endif |
| .get_link_ksettings = phy_ethtool_get_link_ksettings, |
| .set_link_ksettings = phy_ethtool_set_link_ksettings, |
| }; |
| |
| /**************************************************************************/ |
| static void setup_system_regs(struct net_device *dev) |
| { |
| struct bfin_mac_local *lp = netdev_priv(dev); |
| int i; |
| unsigned short sysctl; |
| |
| /* |
| * Odd word alignment for Receive Frame DMA word |
| * Configure checksum support and rcve frame word alignment |
| */ |
| sysctl = bfin_read_EMAC_SYSCTL(); |
| /* |
| * check if interrupt is requested for any PHY, |
| * enable PHY interrupt only if needed |
| */ |
| for (i = 0; i < PHY_MAX_ADDR; ++i) |
| if (lp->mii_bus->irq[i] != PHY_POLL) |
| break; |
| if (i < PHY_MAX_ADDR) |
| sysctl |= PHYIE; |
| sysctl |= RXDWA; |
| #if defined(BFIN_MAC_CSUM_OFFLOAD) |
| sysctl |= RXCKS; |
| #else |
| sysctl &= ~RXCKS; |
| #endif |
| bfin_write_EMAC_SYSCTL(sysctl); |
| |
| bfin_write_EMAC_MMC_CTL(RSTC | CROLL); |
| |
| /* Set vlan regs to let 1522 bytes long packets pass through */ |
| bfin_write_EMAC_VLAN1(lp->vlan1_mask); |
| bfin_write_EMAC_VLAN2(lp->vlan2_mask); |
| |
| /* Initialize the TX DMA channel registers */ |
| bfin_write_DMA2_X_COUNT(0); |
| bfin_write_DMA2_X_MODIFY(4); |
| bfin_write_DMA2_Y_COUNT(0); |
| bfin_write_DMA2_Y_MODIFY(0); |
| |
| /* Initialize the RX DMA channel registers */ |
| bfin_write_DMA1_X_COUNT(0); |
| bfin_write_DMA1_X_MODIFY(4); |
| bfin_write_DMA1_Y_COUNT(0); |
| bfin_write_DMA1_Y_MODIFY(0); |
| } |
| |
| static void setup_mac_addr(u8 *mac_addr) |
| { |
| u32 addr_low = le32_to_cpu(*(__le32 *) & mac_addr[0]); |
| u16 addr_hi = le16_to_cpu(*(__le16 *) & mac_addr[4]); |
| |
| /* this depends on a little-endian machine */ |
| bfin_write_EMAC_ADDRLO(addr_low); |
| bfin_write_EMAC_ADDRHI(addr_hi); |
| } |
| |
| static int bfin_mac_set_mac_address(struct net_device *dev, void *p) |
| { |
| struct sockaddr *addr = p; |
| if (netif_running(dev)) |
| return -EBUSY; |
| memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); |
| setup_mac_addr(dev->dev_addr); |
| return 0; |
| } |
| |
| #ifdef CONFIG_BFIN_MAC_USE_HWSTAMP |
| #define bfin_mac_hwtstamp_is_none(cfg) ((cfg) == HWTSTAMP_FILTER_NONE) |
| |
| static u32 bfin_select_phc_clock(u32 input_clk, unsigned int *shift_result) |
| { |
| u32 ipn = 1000000000UL / input_clk; |
| u32 ppn = 1; |
| unsigned int shift = 0; |
| |
| while (ppn <= ipn) { |
| ppn <<= 1; |
| shift++; |
| } |
| *shift_result = shift; |
| return 1000000000UL / ppn; |
| } |
| |
| static int bfin_mac_hwtstamp_set(struct net_device *netdev, |
| struct ifreq *ifr) |
| { |
| struct hwtstamp_config config; |
| struct bfin_mac_local *lp = netdev_priv(netdev); |
| u16 ptpctl; |
| u32 ptpfv1, ptpfv2, ptpfv3, ptpfoff; |
| |
| if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) |
| return -EFAULT; |
| |
| pr_debug("%s config flag:0x%x, tx_type:0x%x, rx_filter:0x%x\n", |
| __func__, config.flags, config.tx_type, config.rx_filter); |
| |
| /* reserved for future extensions */ |
| if (config.flags) |
| return -EINVAL; |
| |
| if ((config.tx_type != HWTSTAMP_TX_OFF) && |
| (config.tx_type != HWTSTAMP_TX_ON)) |
| return -ERANGE; |
| |
| ptpctl = bfin_read_EMAC_PTP_CTL(); |
| |
| switch (config.rx_filter) { |
| case HWTSTAMP_FILTER_NONE: |
| /* |
| * Dont allow any timestamping |
| */ |
| ptpfv3 = 0xFFFFFFFF; |
| bfin_write_EMAC_PTP_FV3(ptpfv3); |
| break; |
| case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: |
| case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: |
| case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: |
| /* |
| * Clear the five comparison mask bits (bits[12:8]) in EMAC_PTP_CTL) |
| * to enable all the field matches. |
| */ |
| ptpctl &= ~0x1F00; |
| bfin_write_EMAC_PTP_CTL(ptpctl); |
| /* |
| * Keep the default values of the EMAC_PTP_FOFF register. |
| */ |
| ptpfoff = 0x4A24170C; |
| bfin_write_EMAC_PTP_FOFF(ptpfoff); |
| /* |
| * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2 |
| * registers. |
| */ |
| ptpfv1 = 0x11040800; |
| bfin_write_EMAC_PTP_FV1(ptpfv1); |
| ptpfv2 = 0x0140013F; |
| bfin_write_EMAC_PTP_FV2(ptpfv2); |
| /* |
| * The default value (0xFFFC) allows the timestamping of both |
| * received Sync messages and Delay_Req messages. |
| */ |
| ptpfv3 = 0xFFFFFFFC; |
| bfin_write_EMAC_PTP_FV3(ptpfv3); |
| |
| config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; |
| break; |
| case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: |
| case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: |
| case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: |
| /* Clear all five comparison mask bits (bits[12:8]) in the |
| * EMAC_PTP_CTL register to enable all the field matches. |
| */ |
| ptpctl &= ~0x1F00; |
| bfin_write_EMAC_PTP_CTL(ptpctl); |
| /* |
| * Keep the default values of the EMAC_PTP_FOFF register, except set |
| * the PTPCOF field to 0x2A. |
| */ |
| ptpfoff = 0x2A24170C; |
| bfin_write_EMAC_PTP_FOFF(ptpfoff); |
| /* |
| * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2 |
| * registers. |
| */ |
| ptpfv1 = 0x11040800; |
| bfin_write_EMAC_PTP_FV1(ptpfv1); |
| ptpfv2 = 0x0140013F; |
| bfin_write_EMAC_PTP_FV2(ptpfv2); |
| /* |
| * To allow the timestamping of Pdelay_Req and Pdelay_Resp, set |
| * the value to 0xFFF0. |
| */ |
| ptpfv3 = 0xFFFFFFF0; |
| bfin_write_EMAC_PTP_FV3(ptpfv3); |
| |
| config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT; |
| break; |
| case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: |
| case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: |
| case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: |
| /* |
| * Clear bits 8 and 12 of the EMAC_PTP_CTL register to enable only the |
| * EFTM and PTPCM field comparison. |
| */ |
| ptpctl &= ~0x1100; |
| bfin_write_EMAC_PTP_CTL(ptpctl); |
| /* |
| * Keep the default values of all the fields of the EMAC_PTP_FOFF |
| * register, except set the PTPCOF field to 0x0E. |
| */ |
| ptpfoff = 0x0E24170C; |
| bfin_write_EMAC_PTP_FOFF(ptpfoff); |
| /* |
| * Program bits [15:0] of the EMAC_PTP_FV1 register to 0x88F7, which |
| * corresponds to PTP messages on the MAC layer. |
| */ |
| ptpfv1 = 0x110488F7; |
| bfin_write_EMAC_PTP_FV1(ptpfv1); |
| ptpfv2 = 0x0140013F; |
| bfin_write_EMAC_PTP_FV2(ptpfv2); |
| /* |
| * To allow the timestamping of Pdelay_Req and Pdelay_Resp |
| * messages, set the value to 0xFFF0. |
| */ |
| ptpfv3 = 0xFFFFFFF0; |
| bfin_write_EMAC_PTP_FV3(ptpfv3); |
| |
| config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; |
| break; |
| default: |
| return -ERANGE; |
| } |
| |
| if (config.tx_type == HWTSTAMP_TX_OFF && |
| bfin_mac_hwtstamp_is_none(config.rx_filter)) { |
| ptpctl &= ~PTP_EN; |
| bfin_write_EMAC_PTP_CTL(ptpctl); |
| |
| SSYNC(); |
| } else { |
| ptpctl |= PTP_EN; |
| bfin_write_EMAC_PTP_CTL(ptpctl); |
| |
| /* |
| * clear any existing timestamp |
| */ |
| bfin_read_EMAC_PTP_RXSNAPLO(); |
| bfin_read_EMAC_PTP_RXSNAPHI(); |
| |
| bfin_read_EMAC_PTP_TXSNAPLO(); |
| bfin_read_EMAC_PTP_TXSNAPHI(); |
| |
| SSYNC(); |
| } |
| |
| lp->stamp_cfg = config; |
| return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? |
| -EFAULT : 0; |
| } |
| |
| static int bfin_mac_hwtstamp_get(struct net_device *netdev, |
| struct ifreq *ifr) |
| { |
| struct bfin_mac_local *lp = netdev_priv(netdev); |
| |
| return copy_to_user(ifr->ifr_data, &lp->stamp_cfg, |
| sizeof(lp->stamp_cfg)) ? |
| -EFAULT : 0; |
| } |
| |
| static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb) |
| { |
| struct bfin_mac_local *lp = netdev_priv(netdev); |
| |
| if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) { |
| int timeout_cnt = MAX_TIMEOUT_CNT; |
| |
| /* When doing time stamping, keep the connection to the socket |
| * a while longer |
| */ |
| skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; |
| |
| /* |
| * The timestamping is done at the EMAC module's MII/RMII interface |
| * when the module sees the Start of Frame of an event message packet. This |
| * interface is the closest possible place to the physical Ethernet transmission |
| * medium, providing the best timing accuracy. |
| */ |
| while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt)) |
| udelay(1); |
| if (timeout_cnt == 0) |
| netdev_err(netdev, "timestamp the TX packet failed\n"); |
| else { |
| struct skb_shared_hwtstamps shhwtstamps; |
| u64 ns; |
| u64 regval; |
| |
| regval = bfin_read_EMAC_PTP_TXSNAPLO(); |
| regval |= (u64)bfin_read_EMAC_PTP_TXSNAPHI() << 32; |
| memset(&shhwtstamps, 0, sizeof(shhwtstamps)); |
| ns = regval << lp->shift; |
| shhwtstamps.hwtstamp = ns_to_ktime(ns); |
| skb_tstamp_tx(skb, &shhwtstamps); |
| } |
| } |
| } |
| |
| static void bfin_rx_hwtstamp(struct net_device *netdev, struct sk_buff *skb) |
| { |
| struct bfin_mac_local *lp = netdev_priv(netdev); |
| u32 valid; |
| u64 regval, ns; |
| struct skb_shared_hwtstamps *shhwtstamps; |
| |
| if (bfin_mac_hwtstamp_is_none(lp->stamp_cfg.rx_filter)) |
| return; |
| |
| valid = bfin_read_EMAC_PTP_ISTAT() & RXEL; |
| if (!valid) |
| return; |
| |
| shhwtstamps = skb_hwtstamps(skb); |
| |
| regval = bfin_read_EMAC_PTP_RXSNAPLO(); |
| regval |= (u64)bfin_read_EMAC_PTP_RXSNAPHI() << 32; |
| ns = regval << lp->shift; |
| memset(shhwtstamps, 0, sizeof(*shhwtstamps)); |
| shhwtstamps->hwtstamp = ns_to_ktime(ns); |
| } |
| |
| static void bfin_mac_hwtstamp_init(struct net_device *netdev) |
| { |
| struct bfin_mac_local *lp = netdev_priv(netdev); |
| u64 addend, ppb; |
| u32 input_clk, phc_clk; |
| |
| /* Initialize hardware timer */ |
| input_clk = get_sclk(); |
| phc_clk = bfin_select_phc_clock(input_clk, &lp->shift); |
| addend = phc_clk * (1ULL << 32); |
| do_div(addend, input_clk); |
| bfin_write_EMAC_PTP_ADDEND((u32)addend); |
| |
| lp->addend = addend; |
| ppb = 1000000000ULL * input_clk; |
| do_div(ppb, phc_clk); |
| lp->max_ppb = ppb - 1000000000ULL - 1ULL; |
| |
| /* Initialize hwstamp config */ |
| lp->stamp_cfg.rx_filter = HWTSTAMP_FILTER_NONE; |
| lp->stamp_cfg.tx_type = HWTSTAMP_TX_OFF; |
| } |
| |
| static u64 bfin_ptp_time_read(struct bfin_mac_local *lp) |
| { |
| u64 ns; |
| u32 lo, hi; |
| |
| lo = bfin_read_EMAC_PTP_TIMELO(); |
| hi = bfin_read_EMAC_PTP_TIMEHI(); |
| |
| ns = ((u64) hi) << 32; |
| ns |= lo; |
| ns <<= lp->shift; |
| |
| return ns; |
| } |
| |
| static void bfin_ptp_time_write(struct bfin_mac_local *lp, u64 ns) |
| { |
| u32 hi, lo; |
| |
| ns >>= lp->shift; |
| hi = ns >> 32; |
| lo = ns & 0xffffffff; |
| |
| bfin_write_EMAC_PTP_TIMELO(lo); |
| bfin_write_EMAC_PTP_TIMEHI(hi); |
| } |
| |
| /* PTP Hardware Clock operations */ |
| |
| static int bfin_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) |
| { |
| u64 adj; |
| u32 diff, addend; |
| int neg_adj = 0; |
| struct bfin_mac_local *lp = |
| container_of(ptp, struct bfin_mac_local, caps); |
| |
| if (ppb < 0) { |
| neg_adj = 1; |
| ppb = -ppb; |
| } |
| addend = lp->addend; |
| adj = addend; |
| adj *= ppb; |
| diff = div_u64(adj, 1000000000ULL); |
| |
| addend = neg_adj ? addend - diff : addend + diff; |
| |
| bfin_write_EMAC_PTP_ADDEND(addend); |
| |
| return 0; |
| } |
| |
| static int bfin_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) |
| { |
| s64 now; |
| unsigned long flags; |
| struct bfin_mac_local *lp = |
| container_of(ptp, struct bfin_mac_local, caps); |
| |
| spin_lock_irqsave(&lp->phc_lock, flags); |
| |
| now = bfin_ptp_time_read(lp); |
| now += delta; |
| bfin_ptp_time_write(lp, now); |
| |
| spin_unlock_irqrestore(&lp->phc_lock, flags); |
| |
| return 0; |
| } |
| |
| static int bfin_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) |
| { |
| u64 ns; |
| unsigned long flags; |
| struct bfin_mac_local *lp = |
| container_of(ptp, struct bfin_mac_local, caps); |
| |
| spin_lock_irqsave(&lp->phc_lock, flags); |
| |
| ns = bfin_ptp_time_read(lp); |
| |
| spin_unlock_irqrestore(&lp->phc_lock, flags); |
| |
| *ts = ns_to_timespec64(ns); |
| |
| return 0; |
| } |
| |
| static int bfin_ptp_settime(struct ptp_clock_info *ptp, |
| const struct timespec64 *ts) |
| { |
| u64 ns; |
| unsigned long flags; |
| struct bfin_mac_local *lp = |
| container_of(ptp, struct bfin_mac_local, caps); |
| |
| ns = timespec64_to_ns(ts); |
| |
| spin_lock_irqsave(&lp->phc_lock, flags); |
| |
| bfin_ptp_time_write(lp, ns); |
| |
| spin_unlock_irqrestore(&lp->phc_lock, flags); |
| |
| return 0; |
| } |
| |
| static int bfin_ptp_enable(struct ptp_clock_info *ptp, |
| struct ptp_clock_request *rq, int on) |
| { |
| return -EOPNOTSUPP; |
| } |
| |
| static const struct ptp_clock_info bfin_ptp_caps = { |
| .owner = THIS_MODULE, |
| .name = "BF518 clock", |
| .max_adj = 0, |
| .n_alarm = 0, |
| .n_ext_ts = 0, |
| .n_per_out = 0, |
| .n_pins = 0, |
| .pps = 0, |
| .adjfreq = bfin_ptp_adjfreq, |
| .adjtime = bfin_ptp_adjtime, |
| .gettime64 = bfin_ptp_gettime, |
| .settime64 = bfin_ptp_settime, |
| .enable = bfin_ptp_enable, |
| }; |
| |
| static int bfin_phc_init(struct net_device *netdev, struct device *dev) |
| { |
| struct bfin_mac_local *lp = netdev_priv(netdev); |
| |
| lp->caps = bfin_ptp_caps; |
| lp->caps.max_adj = lp->max_ppb; |
| lp->clock = ptp_clock_register(&lp->caps, dev); |
| if (IS_ERR(lp->clock)) |
| return PTR_ERR(lp->clock); |
| |
| lp->phc_index = ptp_clock_index(lp->clock); |
| spin_lock_init(&lp->phc_lock); |
| |
| return 0; |
| } |
| |
| static void bfin_phc_release(struct bfin_mac_local *lp) |
| { |
| ptp_clock_unregister(lp->clock); |
| } |
| |
| #else |
| # define bfin_mac_hwtstamp_is_none(cfg) 0 |
| # define bfin_mac_hwtstamp_init(dev) |
| # define bfin_mac_hwtstamp_set(dev, ifr) (-EOPNOTSUPP) |
| # define bfin_mac_hwtstamp_get(dev, ifr) (-EOPNOTSUPP) |
| # define bfin_rx_hwtstamp(dev, skb) |
| # define bfin_tx_hwtstamp(dev, skb) |
| # define bfin_phc_init(netdev, dev) 0 |
| # define bfin_phc_release(lp) |
| #endif |
| |
| static inline void _tx_reclaim_skb(void) |
| { |
| do { |
| tx_list_head->desc_a.config &= ~DMAEN; |
| tx_list_head->status.status_word = 0; |
| if (tx_list_head->skb) { |
| dev_consume_skb_any(tx_list_head->skb); |
| tx_list_head->skb = NULL; |
| } |
| tx_list_head = tx_list_head->next; |
| |
| } while (tx_list_head->status.status_word != 0); |
| } |
| |
| static void tx_reclaim_skb(struct bfin_mac_local *lp) |
| { |
| int timeout_cnt = MAX_TIMEOUT_CNT; |
| |
| if (tx_list_head->status.status_word != 0) |
| _tx_reclaim_skb(); |
| |
| if (current_tx_ptr->next == tx_list_head) { |
| while (tx_list_head->status.status_word == 0) { |
| /* slow down polling to avoid too many queue stop. */ |
| udelay(10); |
| /* reclaim skb if DMA is not running. */ |
| if (!(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)) |
| break; |
| if (timeout_cnt-- < 0) |
| break; |
| } |
| |
| if (timeout_cnt >= 0) |
| _tx_reclaim_skb(); |
| else |
| netif_stop_queue(lp->ndev); |
| } |
| |
| if (current_tx_ptr->next != tx_list_head && |
| netif_queue_stopped(lp->ndev)) |
| netif_wake_queue(lp->ndev); |
| |
| if (tx_list_head != current_tx_ptr) { |
| /* shorten the timer interval if tx queue is stopped */ |
| if (netif_queue_stopped(lp->ndev)) |
| lp->tx_reclaim_timer.expires = |
| jiffies + (TX_RECLAIM_JIFFIES >> 4); |
| else |
| lp->tx_reclaim_timer.expires = |
| jiffies + TX_RECLAIM_JIFFIES; |
| |
| mod_timer(&lp->tx_reclaim_timer, |
| lp->tx_reclaim_timer.expires); |
| } |
| |
| return; |
| } |
| |
| static void tx_reclaim_skb_timeout(struct timer_list *t) |
| { |
| struct bfin_mac_local *lp = from_timer(lp, t, tx_reclaim_timer); |
| |
| tx_reclaim_skb(lp); |
| } |
| |
| static int bfin_mac_hard_start_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct bfin_mac_local *lp = netdev_priv(dev); |
| u16 *data; |
| u32 data_align = (unsigned long)(skb->data) & 0x3; |
| |
| current_tx_ptr->skb = skb; |
| |
| if (data_align == 0x2) { |
| /* move skb->data to current_tx_ptr payload */ |
| data = (u16 *)(skb->data) - 1; |
| *data = (u16)(skb->len); |
| /* |
| * When transmitting an Ethernet packet, the PTP_TSYNC module requires |
| * a DMA_Length_Word field associated with the packet. The lower 12 bits |
| * of this field are the length of the packet payload in bytes and the higher |
| * 4 bits are the timestamping enable field. |
| */ |
| if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) |
| *data |= 0x1000; |
| |
| current_tx_ptr->desc_a.start_addr = (u32)data; |
| /* this is important! */ |
| blackfin_dcache_flush_range((u32)data, |
| (u32)((u8 *)data + skb->len + 4)); |
| } else { |
| *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len); |
| /* enable timestamping for the sent packet */ |
| if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) |
| *((u16 *)(current_tx_ptr->packet)) |= 0x1000; |
| memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data, |
| skb->len); |
| current_tx_ptr->desc_a.start_addr = |
| (u32)current_tx_ptr->packet; |
| blackfin_dcache_flush_range( |
| (u32)current_tx_ptr->packet, |
| (u32)(current_tx_ptr->packet + skb->len + 2)); |
| } |
| |
| /* make sure the internal data buffers in the core are drained |
| * so that the DMA descriptors are completely written when the |
| * DMA engine goes to fetch them below |
| */ |
| SSYNC(); |
| |
| /* always clear status buffer before start tx dma */ |
| current_tx_ptr->status.status_word = 0; |
| |
| /* enable this packet's dma */ |
| current_tx_ptr->desc_a.config |= DMAEN; |
| |
| /* tx dma is running, just return */ |
| if (bfin_read_DMA2_IRQ_STATUS() & DMA_RUN) |
| goto out; |
| |
| /* tx dma is not running */ |
| bfin_write_DMA2_NEXT_DESC_PTR(&(current_tx_ptr->desc_a)); |
| /* dma enabled, read from memory, size is 6 */ |
| bfin_write_DMA2_CONFIG(current_tx_ptr->desc_a.config); |
| /* Turn on the EMAC tx */ |
| bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE); |
| |
| out: |
| bfin_tx_hwtstamp(dev, skb); |
| |
| current_tx_ptr = current_tx_ptr->next; |
| dev->stats.tx_packets++; |
| dev->stats.tx_bytes += (skb->len); |
| |
| tx_reclaim_skb(lp); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| #define IP_HEADER_OFF 0 |
| #define RX_ERROR_MASK (RX_LONG | RX_ALIGN | RX_CRC | RX_LEN | \ |
| RX_FRAG | RX_ADDR | RX_DMAO | RX_PHY | RX_LATE | RX_RANGE) |
| |
| static void bfin_mac_rx(struct bfin_mac_local *lp) |
| { |
| struct net_device *dev = lp->ndev; |
| struct sk_buff *skb, *new_skb; |
| unsigned short len; |
| #if defined(BFIN_MAC_CSUM_OFFLOAD) |
| unsigned int i; |
| unsigned char fcs[ETH_FCS_LEN + 1]; |
| #endif |
| |
| /* check if frame status word reports an error condition |
| * we which case we simply drop the packet |
| */ |
| if (current_rx_ptr->status.status_word & RX_ERROR_MASK) { |
| netdev_notice(dev, "rx: receive error - packet dropped\n"); |
| dev->stats.rx_dropped++; |
| goto out; |
| } |
| |
| /* allocate a new skb for next time receive */ |
| skb = current_rx_ptr->skb; |
| |
| new_skb = netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN); |
| if (!new_skb) { |
| dev->stats.rx_dropped++; |
| goto out; |
| } |
| /* reserve 2 bytes for RXDWA padding */ |
| skb_reserve(new_skb, NET_IP_ALIGN); |
| /* Invalidate the data cache of skb->data range when it is write back |
| * cache. It will prevent overwriting the new data from DMA |
| */ |
| blackfin_dcache_invalidate_range((unsigned long)new_skb->head, |
| (unsigned long)new_skb->end); |
| |
| current_rx_ptr->skb = new_skb; |
| current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2; |
| |
| len = (unsigned short)(current_rx_ptr->status.status_word & RX_FRLEN); |
| /* Deduce Ethernet FCS length from Ethernet payload length */ |
| len -= ETH_FCS_LEN; |
| skb_put(skb, len); |
| |
| skb->protocol = eth_type_trans(skb, dev); |
| |
| bfin_rx_hwtstamp(dev, skb); |
| |
| #if defined(BFIN_MAC_CSUM_OFFLOAD) |
| /* Checksum offloading only works for IPv4 packets with the standard IP header |
| * length of 20 bytes, because the blackfin MAC checksum calculation is |
| * based on that assumption. We must NOT use the calculated checksum if our |
| * IP version or header break that assumption. |
| */ |
| if (skb->data[IP_HEADER_OFF] == 0x45) { |
| skb->csum = current_rx_ptr->status.ip_payload_csum; |
| /* |
| * Deduce Ethernet FCS from hardware generated IP payload checksum. |
| * IP checksum is based on 16-bit one's complement algorithm. |
| * To deduce a value from checksum is equal to add its inversion. |
| * If the IP payload len is odd, the inversed FCS should also |
| * begin from odd address and leave first byte zero. |
| */ |
| if (skb->len % 2) { |
| fcs[0] = 0; |
| for (i = 0; i < ETH_FCS_LEN; i++) |
| fcs[i + 1] = ~skb->data[skb->len + i]; |
| skb->csum = csum_partial(fcs, ETH_FCS_LEN + 1, skb->csum); |
| } else { |
| for (i = 0; i < ETH_FCS_LEN; i++) |
| fcs[i] = ~skb->data[skb->len + i]; |
| skb->csum = csum_partial(fcs, ETH_FCS_LEN, skb->csum); |
| } |
| skb->ip_summed = CHECKSUM_COMPLETE; |
| } |
| #endif |
| |
| napi_gro_receive(&lp->napi, skb); |
| |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += len; |
| out: |
| current_rx_ptr->status.status_word = 0x00000000; |
| current_rx_ptr = current_rx_ptr->next; |
| } |
| |
| static int bfin_mac_poll(struct napi_struct *napi, int budget) |
| { |
| int i = 0; |
| struct bfin_mac_local *lp = container_of(napi, |
| struct bfin_mac_local, |
| napi); |
| |
| while (current_rx_ptr->status.status_word != 0 && i < budget) { |
| bfin_mac_rx(lp); |
| i++; |
| } |
| |
| if (i < budget) { |
| napi_complete_done(napi, i); |
| if (test_and_clear_bit(BFIN_MAC_RX_IRQ_DISABLED, &lp->flags)) |
| enable_irq(IRQ_MAC_RX); |
| } |
| |
| return i; |
| } |
| |
| /* interrupt routine to handle rx and error signal */ |
| static irqreturn_t bfin_mac_interrupt(int irq, void *dev_id) |
| { |
| struct bfin_mac_local *lp = netdev_priv(dev_id); |
| u32 status; |
| |
| status = bfin_read_DMA1_IRQ_STATUS(); |
| |
| bfin_write_DMA1_IRQ_STATUS(status | DMA_DONE | DMA_ERR); |
| if (status & DMA_DONE) { |
| disable_irq_nosync(IRQ_MAC_RX); |
| set_bit(BFIN_MAC_RX_IRQ_DISABLED, &lp->flags); |
| napi_schedule(&lp->napi); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void bfin_mac_poll_controller(struct net_device *dev) |
| { |
| struct bfin_mac_local *lp = netdev_priv(dev); |
| |
| bfin_mac_interrupt(IRQ_MAC_RX, dev); |
| tx_reclaim_skb(lp); |
| } |
| #endif /* CONFIG_NET_POLL_CONTROLLER */ |
| |
| static void bfin_mac_disable(void) |
| { |
| unsigned int opmode; |
| |
| opmode = bfin_read_EMAC_OPMODE(); |
| opmode &= (~RE); |
| opmode &= (~TE); |
| /* Turn off the EMAC */ |
| bfin_write_EMAC_OPMODE(opmode); |
| } |
| |
| /* |
| * Enable Interrupts, Receive, and Transmit |
| */ |
| static int bfin_mac_enable(struct phy_device *phydev) |
| { |
| int ret; |
| u32 opmode; |
| |
| pr_debug("%s\n", __func__); |
| |
| /* Set RX DMA */ |
| bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a)); |
| bfin_write_DMA1_CONFIG(rx_list_head->desc_a.config); |
| |
| /* Wait MII done */ |
| ret = bfin_mdio_poll(); |
| if (ret) |
| return ret; |
| |
| /* We enable only RX here */ |
| /* ASTP : Enable Automatic Pad Stripping |
| PR : Promiscuous Mode for test |
| PSF : Receive frames with total length less than 64 bytes. |
| FDMODE : Full Duplex Mode |
| LB : Internal Loopback for test |
| RE : Receiver Enable */ |
| opmode = bfin_read_EMAC_OPMODE(); |
| if (opmode & FDMODE) |
| opmode |= PSF; |
| else |
| opmode |= DRO | DC | PSF; |
| opmode |= RE; |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_RMII) { |
| opmode |= RMII; /* For Now only 100MBit are supported */ |
| #if defined(CONFIG_BF537) || defined(CONFIG_BF536) |
| if (__SILICON_REVISION__ < 3) { |
| /* |
| * This isn't publicly documented (fun times!), but in |
| * silicon <=0.2, the RX and TX pins are clocked together. |
| * So in order to recv, we must enable the transmit side |
| * as well. This will cause a spurious TX interrupt too, |
| * but we can easily consume that. |
| */ |
| opmode |= TE; |
| } |
| #endif |
| } |
| |
| /* Turn on the EMAC rx */ |
| bfin_write_EMAC_OPMODE(opmode); |
| |
| return 0; |
| } |
| |
| /* Our watchdog timed out. Called by the networking layer */ |
| static void bfin_mac_timeout(struct net_device *dev) |
| { |
| struct bfin_mac_local *lp = netdev_priv(dev); |
| |
| pr_debug("%s: %s\n", dev->name, __func__); |
| |
| bfin_mac_disable(); |
| |
| del_timer(&lp->tx_reclaim_timer); |
| |
| /* reset tx queue and free skb */ |
| while (tx_list_head != current_tx_ptr) { |
| tx_list_head->desc_a.config &= ~DMAEN; |
| tx_list_head->status.status_word = 0; |
| if (tx_list_head->skb) { |
| dev_kfree_skb(tx_list_head->skb); |
| tx_list_head->skb = NULL; |
| } |
| tx_list_head = tx_list_head->next; |
| } |
| |
| if (netif_queue_stopped(dev)) |
| netif_wake_queue(dev); |
| |
| bfin_mac_enable(dev->phydev); |
| |
| /* We can accept TX packets again */ |
| netif_trans_update(dev); /* prevent tx timeout */ |
| } |
| |
| static void bfin_mac_multicast_hash(struct net_device *dev) |
| { |
| u32 emac_hashhi, emac_hashlo; |
| struct netdev_hw_addr *ha; |
| u32 crc; |
| |
| emac_hashhi = emac_hashlo = 0; |
| |
| netdev_for_each_mc_addr(ha, dev) { |
| crc = ether_crc(ETH_ALEN, ha->addr); |
| crc >>= 26; |
| |
| if (crc & 0x20) |
| emac_hashhi |= 1 << (crc & 0x1f); |
| else |
| emac_hashlo |= 1 << (crc & 0x1f); |
| } |
| |
| bfin_write_EMAC_HASHHI(emac_hashhi); |
| bfin_write_EMAC_HASHLO(emac_hashlo); |
| } |
| |
| /* |
| * This routine will, depending on the values passed to it, |
| * either make it accept multicast packets, go into |
| * promiscuous mode (for TCPDUMP and cousins) or accept |
| * a select set of multicast packets |
| */ |
| static void bfin_mac_set_multicast_list(struct net_device *dev) |
| { |
| u32 sysctl; |
| |
| if (dev->flags & IFF_PROMISC) { |
| netdev_info(dev, "set promisc mode\n"); |
| sysctl = bfin_read_EMAC_OPMODE(); |
| sysctl |= PR; |
| bfin_write_EMAC_OPMODE(sysctl); |
| } else if (dev->flags & IFF_ALLMULTI) { |
| /* accept all multicast */ |
| sysctl = bfin_read_EMAC_OPMODE(); |
| sysctl |= PAM; |
| bfin_write_EMAC_OPMODE(sysctl); |
| } else if (!netdev_mc_empty(dev)) { |
| /* set up multicast hash table */ |
| sysctl = bfin_read_EMAC_OPMODE(); |
| sysctl |= HM; |
| bfin_write_EMAC_OPMODE(sysctl); |
| bfin_mac_multicast_hash(dev); |
| } else { |
| /* clear promisc or multicast mode */ |
| sysctl = bfin_read_EMAC_OPMODE(); |
| sysctl &= ~(RAF | PAM); |
| bfin_write_EMAC_OPMODE(sysctl); |
| } |
| } |
| |
| static int bfin_mac_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
| { |
| if (!netif_running(netdev)) |
| return -EINVAL; |
| |
| switch (cmd) { |
| case SIOCSHWTSTAMP: |
| return bfin_mac_hwtstamp_set(netdev, ifr); |
| case SIOCGHWTSTAMP: |
| return bfin_mac_hwtstamp_get(netdev, ifr); |
| default: |
| if (netdev->phydev) |
| return phy_mii_ioctl(netdev->phydev, ifr, cmd); |
| else |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| /* |
| * this puts the device in an inactive state |
| */ |
| static void bfin_mac_shutdown(struct net_device *dev) |
| { |
| /* Turn off the EMAC */ |
| bfin_write_EMAC_OPMODE(0x00000000); |
| /* Turn off the EMAC RX DMA */ |
| bfin_write_DMA1_CONFIG(0x0000); |
| bfin_write_DMA2_CONFIG(0x0000); |
| } |
| |
| /* |
| * Open and Initialize the interface |
| * |
| * Set up everything, reset the card, etc.. |
| */ |
| static int bfin_mac_open(struct net_device *dev) |
| { |
| struct bfin_mac_local *lp = netdev_priv(dev); |
| int ret; |
| pr_debug("%s: %s\n", dev->name, __func__); |
| |
| /* |
| * Check that the address is valid. If its not, refuse |
| * to bring the device up. The user must specify an |
| * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx |
| */ |
| if (!is_valid_ether_addr(dev->dev_addr)) { |
| netdev_warn(dev, "no valid ethernet hw addr\n"); |
| return -EINVAL; |
| } |
| |
| /* initial rx and tx list */ |
| ret = desc_list_init(dev); |
| if (ret) |
| return ret; |
| |
| phy_start(dev->phydev); |
| setup_system_regs(dev); |
| setup_mac_addr(dev->dev_addr); |
| |
| bfin_mac_disable(); |
| ret = bfin_mac_enable(dev->phydev); |
| if (ret) |
| return ret; |
| pr_debug("hardware init finished\n"); |
| |
| napi_enable(&lp->napi); |
| netif_start_queue(dev); |
| netif_carrier_on(dev); |
| |
| return 0; |
| } |
| |
| /* |
| * this makes the board clean up everything that it can |
| * and not talk to the outside world. Caused by |
| * an 'ifconfig ethX down' |
| */ |
| static int bfin_mac_close(struct net_device *dev) |
| { |
| struct bfin_mac_local *lp = netdev_priv(dev); |
| pr_debug("%s: %s\n", dev->name, __func__); |
| |
| netif_stop_queue(dev); |
| napi_disable(&lp->napi); |
| netif_carrier_off(dev); |
| |
| phy_stop(dev->phydev); |
| phy_write(dev->phydev, MII_BMCR, BMCR_PDOWN); |
| |
| /* clear everything */ |
| bfin_mac_shutdown(dev); |
| |
| /* free the rx/tx buffers */ |
| desc_list_free(); |
| |
| return 0; |
| } |
| |
| static const struct net_device_ops bfin_mac_netdev_ops = { |
| .ndo_open = bfin_mac_open, |
| .ndo_stop = bfin_mac_close, |
| .ndo_start_xmit = bfin_mac_hard_start_xmit, |
| .ndo_set_mac_address = bfin_mac_set_mac_address, |
| .ndo_tx_timeout = bfin_mac_timeout, |
| .ndo_set_rx_mode = bfin_mac_set_multicast_list, |
| .ndo_do_ioctl = bfin_mac_ioctl, |
| .ndo_validate_addr = eth_validate_addr, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = bfin_mac_poll_controller, |
| #endif |
| }; |
| |
| static int bfin_mac_probe(struct platform_device *pdev) |
| { |
| struct net_device *ndev; |
| struct bfin_mac_local *lp; |
| struct platform_device *pd; |
| struct bfin_mii_bus_platform_data *mii_bus_data; |
| int rc; |
| |
| ndev = alloc_etherdev(sizeof(struct bfin_mac_local)); |
| if (!ndev) |
| return -ENOMEM; |
| |
| SET_NETDEV_DEV(ndev, &pdev->dev); |
| platform_set_drvdata(pdev, ndev); |
| lp = netdev_priv(ndev); |
| lp->ndev = ndev; |
| |
| /* Grab the MAC address in the MAC */ |
| *(__le32 *) (&(ndev->dev_addr[0])) = cpu_to_le32(bfin_read_EMAC_ADDRLO()); |
| *(__le16 *) (&(ndev->dev_addr[4])) = cpu_to_le16((u16) bfin_read_EMAC_ADDRHI()); |
| |
| /* probe mac */ |
| /*todo: how to probe? which is revision_register */ |
| bfin_write_EMAC_ADDRLO(0x12345678); |
| if (bfin_read_EMAC_ADDRLO() != 0x12345678) { |
| dev_err(&pdev->dev, "Cannot detect Blackfin on-chip ethernet MAC controller!\n"); |
| rc = -ENODEV; |
| goto out_err_probe_mac; |
| } |
| |
| |
| /* |
| * Is it valid? (Did bootloader initialize it?) |
| * Grab the MAC from the board somehow |
| * this is done in the arch/blackfin/mach-bfxxx/boards/eth_mac.c |
| */ |
| if (!is_valid_ether_addr(ndev->dev_addr)) { |
| if (bfin_get_ether_addr(ndev->dev_addr) || |
| !is_valid_ether_addr(ndev->dev_addr)) { |
| /* Still not valid, get a random one */ |
| netdev_warn(ndev, "Setting Ethernet MAC to a random one\n"); |
| eth_hw_addr_random(ndev); |
| } |
| } |
| |
| setup_mac_addr(ndev->dev_addr); |
| |
| if (!dev_get_platdata(&pdev->dev)) { |
| dev_err(&pdev->dev, "Cannot get platform device bfin_mii_bus!\n"); |
| rc = -ENODEV; |
| goto out_err_probe_mac; |
| } |
| pd = dev_get_platdata(&pdev->dev); |
| lp->mii_bus = platform_get_drvdata(pd); |
| if (!lp->mii_bus) { |
| dev_err(&pdev->dev, "Cannot get mii_bus!\n"); |
| rc = -ENODEV; |
| goto out_err_probe_mac; |
| } |
| lp->mii_bus->priv = ndev; |
| mii_bus_data = dev_get_platdata(&pd->dev); |
| |
| rc = mii_probe(ndev, mii_bus_data->phy_mode); |
| if (rc) { |
| dev_err(&pdev->dev, "MII Probe failed!\n"); |
| goto out_err_mii_probe; |
| } |
| |
| lp->vlan1_mask = ETH_P_8021Q | mii_bus_data->vlan1_mask; |
| lp->vlan2_mask = ETH_P_8021Q | mii_bus_data->vlan2_mask; |
| |
| ndev->netdev_ops = &bfin_mac_netdev_ops; |
| ndev->ethtool_ops = &bfin_mac_ethtool_ops; |
| |
| timer_setup(&lp->tx_reclaim_timer, tx_reclaim_skb_timeout, 0); |
| |
| lp->flags = 0; |
| netif_napi_add(ndev, &lp->napi, bfin_mac_poll, CONFIG_BFIN_RX_DESC_NUM); |
| |
| spin_lock_init(&lp->lock); |
| |
| /* now, enable interrupts */ |
| /* register irq handler */ |
| rc = request_irq(IRQ_MAC_RX, bfin_mac_interrupt, |
| 0, "EMAC_RX", ndev); |
| if (rc) { |
| dev_err(&pdev->dev, "Cannot request Blackfin MAC RX IRQ!\n"); |
| rc = -EBUSY; |
| goto out_err_request_irq; |
| } |
| |
| rc = register_netdev(ndev); |
| if (rc) { |
| dev_err(&pdev->dev, "Cannot register net device!\n"); |
| goto out_err_reg_ndev; |
| } |
| |
| bfin_mac_hwtstamp_init(ndev); |
| rc = bfin_phc_init(ndev, &pdev->dev); |
| if (rc) { |
| dev_err(&pdev->dev, "Cannot register PHC device!\n"); |
| goto out_err_phc; |
| } |
| |
| /* now, print out the card info, in a short format.. */ |
| netdev_info(ndev, "%s, Version %s\n", DRV_DESC, DRV_VERSION); |
| |
| return 0; |
| |
| out_err_phc: |
| out_err_reg_ndev: |
| free_irq(IRQ_MAC_RX, ndev); |
| out_err_request_irq: |
| netif_napi_del(&lp->napi); |
| out_err_mii_probe: |
| mdiobus_unregister(lp->mii_bus); |
| mdiobus_free(lp->mii_bus); |
| out_err_probe_mac: |
| free_netdev(ndev); |
| |
| return rc; |
| } |
| |
| static int bfin_mac_remove(struct platform_device *pdev) |
| { |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| struct bfin_mac_local *lp = netdev_priv(ndev); |
| |
| bfin_phc_release(lp); |
| |
| lp->mii_bus->priv = NULL; |
| |
| unregister_netdev(ndev); |
| |
| netif_napi_del(&lp->napi); |
| |
| free_irq(IRQ_MAC_RX, ndev); |
| |
| free_netdev(ndev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int bfin_mac_suspend(struct platform_device *pdev, pm_message_t mesg) |
| { |
| struct net_device *net_dev = platform_get_drvdata(pdev); |
| struct bfin_mac_local *lp = netdev_priv(net_dev); |
| |
| if (lp->wol) { |
| bfin_write_EMAC_OPMODE((bfin_read_EMAC_OPMODE() & ~TE) | RE); |
| bfin_write_EMAC_WKUP_CTL(MPKE); |
| enable_irq_wake(IRQ_MAC_WAKEDET); |
| } else { |
| if (netif_running(net_dev)) |
| bfin_mac_close(net_dev); |
| } |
| |
| return 0; |
| } |
| |
| static int bfin_mac_resume(struct platform_device *pdev) |
| { |
| struct net_device *net_dev = platform_get_drvdata(pdev); |
| struct bfin_mac_local *lp = netdev_priv(net_dev); |
| |
| if (lp->wol) { |
| bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE); |
| bfin_write_EMAC_WKUP_CTL(0); |
| disable_irq_wake(IRQ_MAC_WAKEDET); |
| } else { |
| if (netif_running(net_dev)) |
| bfin_mac_open(net_dev); |
| } |
| |
| return 0; |
| } |
| #else |
| #define bfin_mac_suspend NULL |
| #define bfin_mac_resume NULL |
| #endif /* CONFIG_PM */ |
| |
| static int bfin_mii_bus_probe(struct platform_device *pdev) |
| { |
| struct mii_bus *miibus; |
| struct bfin_mii_bus_platform_data *mii_bus_pd; |
| const unsigned short *pin_req; |
| int rc, i; |
| |
| mii_bus_pd = dev_get_platdata(&pdev->dev); |
| if (!mii_bus_pd) { |
| dev_err(&pdev->dev, "No peripherals in platform data!\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * We are setting up a network card, |
| * so set the GPIO pins to Ethernet mode |
| */ |
| pin_req = mii_bus_pd->mac_peripherals; |
| rc = peripheral_request_list(pin_req, KBUILD_MODNAME); |
| if (rc) { |
| dev_err(&pdev->dev, "Requesting peripherals failed!\n"); |
| return rc; |
| } |
| |
| rc = -ENOMEM; |
| miibus = mdiobus_alloc(); |
| if (miibus == NULL) |
| goto out_err_alloc; |
| miibus->read = bfin_mdiobus_read; |
| miibus->write = bfin_mdiobus_write; |
| |
| miibus->parent = &pdev->dev; |
| miibus->name = "bfin_mii_bus"; |
| miibus->phy_mask = mii_bus_pd->phy_mask; |
| |
| snprintf(miibus->id, MII_BUS_ID_SIZE, "%s-%x", |
| pdev->name, pdev->id); |
| |
| rc = clamp(mii_bus_pd->phydev_number, 0, PHY_MAX_ADDR); |
| if (rc != mii_bus_pd->phydev_number) |
| dev_err(&pdev->dev, "Invalid number (%i) of phydevs\n", |
| mii_bus_pd->phydev_number); |
| for (i = 0; i < rc; ++i) { |
| unsigned short phyaddr = mii_bus_pd->phydev_data[i].addr; |
| if (phyaddr < PHY_MAX_ADDR) |
| miibus->irq[phyaddr] = mii_bus_pd->phydev_data[i].irq; |
| else |
| dev_err(&pdev->dev, |
| "Invalid PHY address %i for phydev %i\n", |
| phyaddr, i); |
| } |
| |
| rc = mdiobus_register(miibus); |
| if (rc) { |
| dev_err(&pdev->dev, "Cannot register MDIO bus!\n"); |
| goto out_err_irq_alloc; |
| } |
| |
| platform_set_drvdata(pdev, miibus); |
| return 0; |
| |
| out_err_irq_alloc: |
| mdiobus_free(miibus); |
| out_err_alloc: |
| peripheral_free_list(pin_req); |
| |
| return rc; |
| } |
| |
| static int bfin_mii_bus_remove(struct platform_device *pdev) |
| { |
| struct mii_bus *miibus = platform_get_drvdata(pdev); |
| struct bfin_mii_bus_platform_data *mii_bus_pd = |
| dev_get_platdata(&pdev->dev); |
| |
| mdiobus_unregister(miibus); |
| mdiobus_free(miibus); |
| peripheral_free_list(mii_bus_pd->mac_peripherals); |
| |
| return 0; |
| } |
| |
| static struct platform_driver bfin_mii_bus_driver = { |
| .probe = bfin_mii_bus_probe, |
| .remove = bfin_mii_bus_remove, |
| .driver = { |
| .name = "bfin_mii_bus", |
| }, |
| }; |
| |
| static struct platform_driver bfin_mac_driver = { |
| .probe = bfin_mac_probe, |
| .remove = bfin_mac_remove, |
| .resume = bfin_mac_resume, |
| .suspend = bfin_mac_suspend, |
| .driver = { |
| .name = KBUILD_MODNAME, |
| }, |
| }; |
| |
| static struct platform_driver * const drivers[] = { |
| &bfin_mii_bus_driver, |
| &bfin_mac_driver, |
| }; |
| |
| static int __init bfin_mac_init(void) |
| { |
| return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); |
| } |
| |
| module_init(bfin_mac_init); |
| |
| static void __exit bfin_mac_cleanup(void) |
| { |
| platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); |
| } |
| |
| module_exit(bfin_mac_cleanup); |
| |