| /* |
| * Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE |
| * Copyright 2003 Andi Kleen, SuSE Labs. |
| * |
| * [ NOTE: this mechanism is now deprecated in favor of the vDSO. ] |
| * |
| * Thanks to hpa@transmeta.com for some useful hint. |
| * Special thanks to Ingo Molnar for his early experience with |
| * a different vsyscall implementation for Linux/IA32 and for the name. |
| * |
| * vsyscall 1 is located at -10Mbyte, vsyscall 2 is located |
| * at virtual address -10Mbyte+1024bytes etc... There are at max 4 |
| * vsyscalls. One vsyscall can reserve more than 1 slot to avoid |
| * jumping out of line if necessary. We cannot add more with this |
| * mechanism because older kernels won't return -ENOSYS. |
| * |
| * Note: the concept clashes with user mode linux. UML users should |
| * use the vDSO. |
| */ |
| |
| #include <linux/time.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/timer.h> |
| #include <linux/seqlock.h> |
| #include <linux/jiffies.h> |
| #include <linux/sysctl.h> |
| #include <linux/topology.h> |
| #include <linux/clocksource.h> |
| #include <linux/getcpu.h> |
| #include <linux/cpu.h> |
| #include <linux/smp.h> |
| #include <linux/notifier.h> |
| #include <linux/syscalls.h> |
| #include <linux/ratelimit.h> |
| |
| #include <asm/vsyscall.h> |
| #include <asm/pgtable.h> |
| #include <asm/compat.h> |
| #include <asm/page.h> |
| #include <asm/unistd.h> |
| #include <asm/fixmap.h> |
| #include <asm/errno.h> |
| #include <asm/io.h> |
| #include <asm/segment.h> |
| #include <asm/desc.h> |
| #include <asm/topology.h> |
| #include <asm/vgtod.h> |
| #include <asm/traps.h> |
| |
| #define CREATE_TRACE_POINTS |
| #include "vsyscall_trace.h" |
| |
| DEFINE_VVAR(int, vgetcpu_mode); |
| DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data); |
| |
| static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE; |
| |
| static int __init vsyscall_setup(char *str) |
| { |
| if (str) { |
| if (!strcmp("emulate", str)) |
| vsyscall_mode = EMULATE; |
| else if (!strcmp("native", str)) |
| vsyscall_mode = NATIVE; |
| else if (!strcmp("none", str)) |
| vsyscall_mode = NONE; |
| else |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| early_param("vsyscall", vsyscall_setup); |
| |
| void update_vsyscall_tz(void) |
| { |
| vsyscall_gtod_data.sys_tz = sys_tz; |
| } |
| |
| void update_vsyscall(struct timespec *wall_time, struct timespec *wtm, |
| struct clocksource *clock, u32 mult) |
| { |
| struct timespec monotonic; |
| |
| write_seqcount_begin(&vsyscall_gtod_data.seq); |
| |
| /* copy vsyscall data */ |
| vsyscall_gtod_data.clock.vclock_mode = clock->archdata.vclock_mode; |
| vsyscall_gtod_data.clock.cycle_last = clock->cycle_last; |
| vsyscall_gtod_data.clock.mask = clock->mask; |
| vsyscall_gtod_data.clock.mult = mult; |
| vsyscall_gtod_data.clock.shift = clock->shift; |
| |
| vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec; |
| vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec; |
| |
| monotonic = timespec_add(*wall_time, *wtm); |
| vsyscall_gtod_data.monotonic_time_sec = monotonic.tv_sec; |
| vsyscall_gtod_data.monotonic_time_nsec = monotonic.tv_nsec; |
| |
| vsyscall_gtod_data.wall_time_coarse = __current_kernel_time(); |
| vsyscall_gtod_data.monotonic_time_coarse = |
| timespec_add(vsyscall_gtod_data.wall_time_coarse, *wtm); |
| |
| write_seqcount_end(&vsyscall_gtod_data.seq); |
| } |
| |
| static void warn_bad_vsyscall(const char *level, struct pt_regs *regs, |
| const char *message) |
| { |
| static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL, DEFAULT_RATELIMIT_BURST); |
| struct task_struct *tsk; |
| |
| if (!show_unhandled_signals || !__ratelimit(&rs)) |
| return; |
| |
| tsk = current; |
| |
| printk("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n", |
| level, tsk->comm, task_pid_nr(tsk), |
| message, regs->ip, regs->cs, |
| regs->sp, regs->ax, regs->si, regs->di); |
| } |
| |
| static int addr_to_vsyscall_nr(unsigned long addr) |
| { |
| int nr; |
| |
| if ((addr & ~0xC00UL) != VSYSCALL_START) |
| return -EINVAL; |
| |
| nr = (addr & 0xC00UL) >> 10; |
| if (nr >= 3) |
| return -EINVAL; |
| |
| return nr; |
| } |
| |
| static bool write_ok_or_segv(unsigned long ptr, size_t size) |
| { |
| /* |
| * XXX: if access_ok, get_user, and put_user handled |
| * sig_on_uaccess_error, this could go away. |
| */ |
| |
| if (!access_ok(VERIFY_WRITE, (void __user *)ptr, size)) { |
| siginfo_t info; |
| struct thread_struct *thread = ¤t->thread; |
| |
| thread->error_code = 6; /* user fault, no page, write */ |
| thread->cr2 = ptr; |
| thread->trap_nr = X86_TRAP_PF; |
| |
| memset(&info, 0, sizeof(info)); |
| info.si_signo = SIGSEGV; |
| info.si_errno = 0; |
| info.si_code = SEGV_MAPERR; |
| info.si_addr = (void __user *)ptr; |
| |
| force_sig_info(SIGSEGV, &info, current); |
| return false; |
| } else { |
| return true; |
| } |
| } |
| |
| bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) |
| { |
| struct task_struct *tsk; |
| unsigned long caller; |
| int vsyscall_nr; |
| int prev_sig_on_uaccess_error; |
| long ret; |
| |
| /* |
| * No point in checking CS -- the only way to get here is a user mode |
| * trap to a high address, which means that we're in 64-bit user code. |
| */ |
| |
| WARN_ON_ONCE(address != regs->ip); |
| |
| if (vsyscall_mode == NONE) { |
| warn_bad_vsyscall(KERN_INFO, regs, |
| "vsyscall attempted with vsyscall=none"); |
| return false; |
| } |
| |
| vsyscall_nr = addr_to_vsyscall_nr(address); |
| |
| trace_emulate_vsyscall(vsyscall_nr); |
| |
| if (vsyscall_nr < 0) { |
| warn_bad_vsyscall(KERN_WARNING, regs, |
| "misaligned vsyscall (exploit attempt or buggy program) -- look up the vsyscall kernel parameter if you need a workaround"); |
| goto sigsegv; |
| } |
| |
| if (get_user(caller, (unsigned long __user *)regs->sp) != 0) { |
| warn_bad_vsyscall(KERN_WARNING, regs, |
| "vsyscall with bad stack (exploit attempt?)"); |
| goto sigsegv; |
| } |
| |
| tsk = current; |
| if (seccomp_mode(&tsk->seccomp)) |
| do_exit(SIGKILL); |
| |
| /* |
| * With a real vsyscall, page faults cause SIGSEGV. We want to |
| * preserve that behavior to make writing exploits harder. |
| */ |
| prev_sig_on_uaccess_error = current_thread_info()->sig_on_uaccess_error; |
| current_thread_info()->sig_on_uaccess_error = 1; |
| |
| /* |
| * 0 is a valid user pointer (in the access_ok sense) on 32-bit and |
| * 64-bit, so we don't need to special-case it here. For all the |
| * vsyscalls, 0 means "don't write anything" not "write it at |
| * address 0". |
| */ |
| ret = -EFAULT; |
| switch (vsyscall_nr) { |
| case 0: |
| if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) || |
| !write_ok_or_segv(regs->si, sizeof(struct timezone))) |
| break; |
| |
| ret = sys_gettimeofday( |
| (struct timeval __user *)regs->di, |
| (struct timezone __user *)regs->si); |
| break; |
| |
| case 1: |
| if (!write_ok_or_segv(regs->di, sizeof(time_t))) |
| break; |
| |
| ret = sys_time((time_t __user *)regs->di); |
| break; |
| |
| case 2: |
| if (!write_ok_or_segv(regs->di, sizeof(unsigned)) || |
| !write_ok_or_segv(regs->si, sizeof(unsigned))) |
| break; |
| |
| ret = sys_getcpu((unsigned __user *)regs->di, |
| (unsigned __user *)regs->si, |
| 0); |
| break; |
| } |
| |
| current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error; |
| |
| if (ret == -EFAULT) { |
| /* Bad news -- userspace fed a bad pointer to a vsyscall. */ |
| warn_bad_vsyscall(KERN_INFO, regs, |
| "vsyscall fault (exploit attempt?)"); |
| |
| /* |
| * If we failed to generate a signal for any reason, |
| * generate one here. (This should be impossible.) |
| */ |
| if (WARN_ON_ONCE(!sigismember(&tsk->pending.signal, SIGBUS) && |
| !sigismember(&tsk->pending.signal, SIGSEGV))) |
| goto sigsegv; |
| |
| return true; /* Don't emulate the ret. */ |
| } |
| |
| regs->ax = ret; |
| |
| /* Emulate a ret instruction. */ |
| regs->ip = caller; |
| regs->sp += 8; |
| |
| return true; |
| |
| sigsegv: |
| force_sig(SIGSEGV, current); |
| return true; |
| } |
| |
| /* |
| * Assume __initcall executes before all user space. Hopefully kmod |
| * doesn't violate that. We'll find out if it does. |
| */ |
| static void __cpuinit vsyscall_set_cpu(int cpu) |
| { |
| unsigned long d; |
| unsigned long node = 0; |
| #ifdef CONFIG_NUMA |
| node = cpu_to_node(cpu); |
| #endif |
| if (cpu_has(&cpu_data(cpu), X86_FEATURE_RDTSCP)) |
| write_rdtscp_aux((node << 12) | cpu); |
| |
| /* |
| * Store cpu number in limit so that it can be loaded quickly |
| * in user space in vgetcpu. (12 bits for the CPU and 8 bits for the node) |
| */ |
| d = 0x0f40000000000ULL; |
| d |= cpu; |
| d |= (node & 0xf) << 12; |
| d |= (node >> 4) << 48; |
| |
| write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_PER_CPU, &d, DESCTYPE_S); |
| } |
| |
| static void __cpuinit cpu_vsyscall_init(void *arg) |
| { |
| /* preemption should be already off */ |
| vsyscall_set_cpu(raw_smp_processor_id()); |
| } |
| |
| static int __cpuinit |
| cpu_vsyscall_notifier(struct notifier_block *n, unsigned long action, void *arg) |
| { |
| long cpu = (long)arg; |
| |
| if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN) |
| smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 1); |
| |
| return NOTIFY_DONE; |
| } |
| |
| void __init map_vsyscall(void) |
| { |
| extern char __vsyscall_page; |
| unsigned long physaddr_vsyscall = __pa_symbol(&__vsyscall_page); |
| extern char __vvar_page; |
| unsigned long physaddr_vvar_page = __pa_symbol(&__vvar_page); |
| |
| __set_fixmap(VSYSCALL_FIRST_PAGE, physaddr_vsyscall, |
| vsyscall_mode == NATIVE |
| ? PAGE_KERNEL_VSYSCALL |
| : PAGE_KERNEL_VVAR); |
| BUILD_BUG_ON((unsigned long)__fix_to_virt(VSYSCALL_FIRST_PAGE) != |
| (unsigned long)VSYSCALL_START); |
| |
| __set_fixmap(VVAR_PAGE, physaddr_vvar_page, PAGE_KERNEL_VVAR); |
| BUILD_BUG_ON((unsigned long)__fix_to_virt(VVAR_PAGE) != |
| (unsigned long)VVAR_ADDRESS); |
| } |
| |
| static int __init vsyscall_init(void) |
| { |
| BUG_ON(VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE)); |
| |
| on_each_cpu(cpu_vsyscall_init, NULL, 1); |
| /* notifier priority > KVM */ |
| hotcpu_notifier(cpu_vsyscall_notifier, 30); |
| |
| return 0; |
| } |
| __initcall(vsyscall_init); |