| /* sound/soc/samsung/s3c2412-i2s.c |
| * |
| * ALSA Soc Audio Layer - S3C2412 I2S driver |
| * |
| * Copyright (c) 2006 Wolfson Microelectronics PLC. |
| * Graeme Gregory graeme.gregory@wolfsonmicro.com |
| * linux@wolfsonmicro.com |
| * |
| * Copyright (c) 2007, 2004-2005 Simtec Electronics |
| * http://armlinux.simtec.co.uk/ |
| * Ben Dooks <ben@simtec.co.uk> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| |
| #include <sound/soc.h> |
| #include <sound/pcm_params.h> |
| |
| #include <mach/gpio-samsung.h> |
| #include <plat/gpio-cfg.h> |
| |
| #include "dma.h" |
| #include "regs-i2s-v2.h" |
| #include "s3c2412-i2s.h" |
| |
| #include <linux/platform_data/asoc-s3c.h> |
| |
| static struct snd_dmaengine_dai_dma_data s3c2412_i2s_pcm_stereo_out = { |
| .addr_width = 4, |
| }; |
| |
| static struct snd_dmaengine_dai_dma_data s3c2412_i2s_pcm_stereo_in = { |
| .addr_width = 4, |
| }; |
| |
| static struct s3c_i2sv2_info s3c2412_i2s; |
| |
| static int s3c2412_i2s_probe(struct snd_soc_dai *dai) |
| { |
| int ret; |
| |
| pr_debug("Entered %s\n", __func__); |
| |
| snd_soc_dai_init_dma_data(dai, &s3c2412_i2s_pcm_stereo_out, |
| &s3c2412_i2s_pcm_stereo_in); |
| |
| ret = s3c_i2sv2_probe(dai, &s3c2412_i2s, S3C2410_PA_IIS); |
| if (ret) |
| return ret; |
| |
| s3c2412_i2s.dma_capture = &s3c2412_i2s_pcm_stereo_in; |
| s3c2412_i2s.dma_playback = &s3c2412_i2s_pcm_stereo_out; |
| |
| s3c2412_i2s.iis_cclk = devm_clk_get(dai->dev, "i2sclk"); |
| if (IS_ERR(s3c2412_i2s.iis_cclk)) { |
| pr_err("failed to get i2sclk clock\n"); |
| return PTR_ERR(s3c2412_i2s.iis_cclk); |
| } |
| |
| /* Set MPLL as the source for IIS CLK */ |
| |
| clk_set_parent(s3c2412_i2s.iis_cclk, clk_get(NULL, "mpll")); |
| clk_prepare_enable(s3c2412_i2s.iis_cclk); |
| |
| s3c2412_i2s.iis_cclk = s3c2412_i2s.iis_pclk; |
| |
| /* Configure the I2S pins (GPE0...GPE4) in correct mode */ |
| s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), |
| S3C_GPIO_PULL_NONE); |
| |
| return 0; |
| } |
| |
| static int s3c2412_i2s_remove(struct snd_soc_dai *dai) |
| { |
| clk_disable_unprepare(s3c2412_i2s.iis_cclk); |
| |
| return 0; |
| } |
| |
| static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct s3c_i2sv2_info *i2s = snd_soc_dai_get_drvdata(cpu_dai); |
| u32 iismod; |
| |
| pr_debug("Entered %s\n", __func__); |
| |
| iismod = readl(i2s->regs + S3C2412_IISMOD); |
| pr_debug("%s: r: IISMOD: %x\n", __func__, iismod); |
| |
| switch (params_width(params)) { |
| case 8: |
| iismod |= S3C2412_IISMOD_8BIT; |
| break; |
| case 16: |
| iismod &= ~S3C2412_IISMOD_8BIT; |
| break; |
| } |
| |
| writel(iismod, i2s->regs + S3C2412_IISMOD); |
| pr_debug("%s: w: IISMOD: %x\n", __func__, iismod); |
| |
| return 0; |
| } |
| |
| #define S3C2412_I2S_RATES \ |
| (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ |
| SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ |
| SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) |
| |
| static const struct snd_soc_dai_ops s3c2412_i2s_dai_ops = { |
| .hw_params = s3c2412_i2s_hw_params, |
| }; |
| |
| static struct snd_soc_dai_driver s3c2412_i2s_dai = { |
| .probe = s3c2412_i2s_probe, |
| .remove = s3c2412_i2s_remove, |
| .playback = { |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = S3C2412_I2S_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE, |
| }, |
| .capture = { |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = S3C2412_I2S_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE, |
| }, |
| .ops = &s3c2412_i2s_dai_ops, |
| }; |
| |
| static const struct snd_soc_component_driver s3c2412_i2s_component = { |
| .name = "s3c2412-i2s", |
| }; |
| |
| static int s3c2412_iis_dev_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| struct resource *res; |
| struct s3c_audio_pdata *pdata = dev_get_platdata(&pdev->dev); |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "missing platform data"); |
| return -ENXIO; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| s3c2412_i2s.regs = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(s3c2412_i2s.regs)) |
| return PTR_ERR(s3c2412_i2s.regs); |
| |
| s3c2412_i2s_pcm_stereo_out.addr = res->start + S3C2412_IISTXD; |
| s3c2412_i2s_pcm_stereo_out.filter_data = pdata->dma_playback; |
| s3c2412_i2s_pcm_stereo_in.addr = res->start + S3C2412_IISRXD; |
| s3c2412_i2s_pcm_stereo_in.filter_data = pdata->dma_capture; |
| |
| ret = samsung_asoc_dma_platform_register(&pdev->dev, |
| pdata->dma_filter, |
| NULL, NULL); |
| if (ret) { |
| pr_err("failed to register the DMA: %d\n", ret); |
| return ret; |
| } |
| |
| ret = s3c_i2sv2_register_component(&pdev->dev, -1, |
| &s3c2412_i2s_component, |
| &s3c2412_i2s_dai); |
| if (ret) |
| pr_err("failed to register the dai\n"); |
| |
| return ret; |
| } |
| |
| static struct platform_driver s3c2412_iis_driver = { |
| .probe = s3c2412_iis_dev_probe, |
| .driver = { |
| .name = "s3c2412-iis", |
| }, |
| }; |
| |
| module_platform_driver(s3c2412_iis_driver); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>"); |
| MODULE_DESCRIPTION("S3C2412 I2S SoC Interface"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:s3c2412-iis"); |