| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright 2020 Google LLC |
| */ |
| #define _GNU_SOURCE |
| |
| #include <errno.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/mman.h> |
| #include <time.h> |
| |
| #include "../kselftest.h" |
| |
| #define EXPECT_SUCCESS 0 |
| #define EXPECT_FAILURE 1 |
| #define NON_OVERLAPPING 0 |
| #define OVERLAPPING 1 |
| #define NS_PER_SEC 1000000000ULL |
| #define VALIDATION_DEFAULT_THRESHOLD 4 /* 4MB */ |
| #define VALIDATION_NO_THRESHOLD 0 /* Verify the entire region */ |
| |
| #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) |
| #define MIN(X, Y) ((X) < (Y) ? (X) : (Y)) |
| |
| struct config { |
| unsigned long long src_alignment; |
| unsigned long long dest_alignment; |
| unsigned long long region_size; |
| int overlapping; |
| }; |
| |
| struct test { |
| const char *name; |
| struct config config; |
| int expect_failure; |
| }; |
| |
| enum { |
| _1KB = 1ULL << 10, /* 1KB -> not page aligned */ |
| _4KB = 4ULL << 10, |
| _8KB = 8ULL << 10, |
| _1MB = 1ULL << 20, |
| _2MB = 2ULL << 20, |
| _4MB = 4ULL << 20, |
| _1GB = 1ULL << 30, |
| _2GB = 2ULL << 30, |
| PTE = _4KB, |
| PMD = _2MB, |
| PUD = _1GB, |
| }; |
| |
| #define MAKE_TEST(source_align, destination_align, size, \ |
| overlaps, should_fail, test_name) \ |
| { \ |
| .name = test_name, \ |
| .config = { \ |
| .src_alignment = source_align, \ |
| .dest_alignment = destination_align, \ |
| .region_size = size, \ |
| .overlapping = overlaps, \ |
| }, \ |
| .expect_failure = should_fail \ |
| } |
| |
| /* |
| * Returns the start address of the mapping on success, else returns |
| * NULL on failure. |
| */ |
| static void *get_source_mapping(struct config c) |
| { |
| unsigned long long addr = 0ULL; |
| void *src_addr = NULL; |
| retry: |
| addr += c.src_alignment; |
| src_addr = mmap((void *) addr, c.region_size, PROT_READ | PROT_WRITE, |
| MAP_FIXED | MAP_ANONYMOUS | MAP_SHARED, -1, 0); |
| if (src_addr == MAP_FAILED) { |
| if (errno == EPERM) |
| goto retry; |
| goto error; |
| } |
| /* |
| * Check that the address is aligned to the specified alignment. |
| * Addresses which have alignments that are multiples of that |
| * specified are not considered valid. For instance, 1GB address is |
| * 2MB-aligned, however it will not be considered valid for a |
| * requested alignment of 2MB. This is done to reduce coincidental |
| * alignment in the tests. |
| */ |
| if (((unsigned long long) src_addr & (c.src_alignment - 1)) || |
| !((unsigned long long) src_addr & c.src_alignment)) |
| goto retry; |
| |
| if (!src_addr) |
| goto error; |
| |
| return src_addr; |
| error: |
| ksft_print_msg("Failed to map source region: %s\n", |
| strerror(errno)); |
| return NULL; |
| } |
| |
| /* Returns the time taken for the remap on success else returns -1. */ |
| static long long remap_region(struct config c, unsigned int threshold_mb, |
| char pattern_seed) |
| { |
| void *addr, *src_addr, *dest_addr; |
| unsigned long long i; |
| struct timespec t_start = {0, 0}, t_end = {0, 0}; |
| long long start_ns, end_ns, align_mask, ret, offset; |
| unsigned long long threshold; |
| |
| if (threshold_mb == VALIDATION_NO_THRESHOLD) |
| threshold = c.region_size; |
| else |
| threshold = MIN(threshold_mb * _1MB, c.region_size); |
| |
| src_addr = get_source_mapping(c); |
| if (!src_addr) { |
| ret = -1; |
| goto out; |
| } |
| |
| /* Set byte pattern */ |
| srand(pattern_seed); |
| for (i = 0; i < threshold; i++) |
| memset((char *) src_addr + i, (char) rand(), 1); |
| |
| /* Mask to zero out lower bits of address for alignment */ |
| align_mask = ~(c.dest_alignment - 1); |
| /* Offset of destination address from the end of the source region */ |
| offset = (c.overlapping) ? -c.dest_alignment : c.dest_alignment; |
| addr = (void *) (((unsigned long long) src_addr + c.region_size |
| + offset) & align_mask); |
| |
| /* See comment in get_source_mapping() */ |
| if (!((unsigned long long) addr & c.dest_alignment)) |
| addr = (void *) ((unsigned long long) addr | c.dest_alignment); |
| |
| clock_gettime(CLOCK_MONOTONIC, &t_start); |
| dest_addr = mremap(src_addr, c.region_size, c.region_size, |
| MREMAP_MAYMOVE|MREMAP_FIXED, (char *) addr); |
| clock_gettime(CLOCK_MONOTONIC, &t_end); |
| |
| if (dest_addr == MAP_FAILED) { |
| ksft_print_msg("mremap failed: %s\n", strerror(errno)); |
| ret = -1; |
| goto clean_up_src; |
| } |
| |
| /* Verify byte pattern after remapping */ |
| srand(pattern_seed); |
| for (i = 0; i < threshold; i++) { |
| char c = (char) rand(); |
| |
| if (((char *) dest_addr)[i] != c) { |
| ksft_print_msg("Data after remap doesn't match at offset %d\n", |
| i); |
| ksft_print_msg("Expected: %#x\t Got: %#x\n", c & 0xff, |
| ((char *) dest_addr)[i] & 0xff); |
| ret = -1; |
| goto clean_up_dest; |
| } |
| } |
| |
| start_ns = t_start.tv_sec * NS_PER_SEC + t_start.tv_nsec; |
| end_ns = t_end.tv_sec * NS_PER_SEC + t_end.tv_nsec; |
| ret = end_ns - start_ns; |
| |
| /* |
| * Since the destination address is specified using MREMAP_FIXED, subsequent |
| * mremap will unmap any previous mapping at the address range specified by |
| * dest_addr and region_size. This significantly affects the remap time of |
| * subsequent tests. So we clean up mappings after each test. |
| */ |
| clean_up_dest: |
| munmap(dest_addr, c.region_size); |
| clean_up_src: |
| munmap(src_addr, c.region_size); |
| out: |
| return ret; |
| } |
| |
| static void run_mremap_test_case(struct test test_case, int *failures, |
| unsigned int threshold_mb, |
| unsigned int pattern_seed) |
| { |
| long long remap_time = remap_region(test_case.config, threshold_mb, |
| pattern_seed); |
| |
| if (remap_time < 0) { |
| if (test_case.expect_failure) |
| ksft_test_result_pass("%s\n\tExpected mremap failure\n", |
| test_case.name); |
| else { |
| ksft_test_result_fail("%s\n", test_case.name); |
| *failures += 1; |
| } |
| } else { |
| /* |
| * Comparing mremap time is only applicable if entire region |
| * was faulted in. |
| */ |
| if (threshold_mb == VALIDATION_NO_THRESHOLD || |
| test_case.config.region_size <= threshold_mb * _1MB) |
| ksft_test_result_pass("%s\n\tmremap time: %12lldns\n", |
| test_case.name, remap_time); |
| else |
| ksft_test_result_pass("%s\n", test_case.name); |
| } |
| } |
| |
| static void usage(const char *cmd) |
| { |
| fprintf(stderr, |
| "Usage: %s [[-t <threshold_mb>] [-p <pattern_seed>]]\n" |
| "-t\t only validate threshold_mb of the remapped region\n" |
| " \t if 0 is supplied no threshold is used; all tests\n" |
| " \t are run and remapped regions validated fully.\n" |
| " \t The default threshold used is 4MB.\n" |
| "-p\t provide a seed to generate the random pattern for\n" |
| " \t validating the remapped region.\n", cmd); |
| } |
| |
| static int parse_args(int argc, char **argv, unsigned int *threshold_mb, |
| unsigned int *pattern_seed) |
| { |
| const char *optstr = "t:p:"; |
| int opt; |
| |
| while ((opt = getopt(argc, argv, optstr)) != -1) { |
| switch (opt) { |
| case 't': |
| *threshold_mb = atoi(optarg); |
| break; |
| case 'p': |
| *pattern_seed = atoi(optarg); |
| break; |
| default: |
| usage(argv[0]); |
| return -1; |
| } |
| } |
| |
| if (optind < argc) { |
| usage(argv[0]); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int main(int argc, char **argv) |
| { |
| int failures = 0; |
| int i, run_perf_tests; |
| unsigned int threshold_mb = VALIDATION_DEFAULT_THRESHOLD; |
| unsigned int pattern_seed; |
| time_t t; |
| |
| pattern_seed = (unsigned int) time(&t); |
| |
| if (parse_args(argc, argv, &threshold_mb, &pattern_seed) < 0) |
| exit(EXIT_FAILURE); |
| |
| ksft_print_msg("Test configs:\n\tthreshold_mb=%u\n\tpattern_seed=%u\n\n", |
| threshold_mb, pattern_seed); |
| |
| struct test test_cases[] = { |
| /* Expected mremap failures */ |
| MAKE_TEST(_4KB, _4KB, _4KB, OVERLAPPING, EXPECT_FAILURE, |
| "mremap - Source and Destination Regions Overlapping"), |
| MAKE_TEST(_4KB, _1KB, _4KB, NON_OVERLAPPING, EXPECT_FAILURE, |
| "mremap - Destination Address Misaligned (1KB-aligned)"), |
| MAKE_TEST(_1KB, _4KB, _4KB, NON_OVERLAPPING, EXPECT_FAILURE, |
| "mremap - Source Address Misaligned (1KB-aligned)"), |
| |
| /* Src addr PTE aligned */ |
| MAKE_TEST(PTE, PTE, _8KB, NON_OVERLAPPING, EXPECT_SUCCESS, |
| "8KB mremap - Source PTE-aligned, Destination PTE-aligned"), |
| |
| /* Src addr 1MB aligned */ |
| MAKE_TEST(_1MB, PTE, _2MB, NON_OVERLAPPING, EXPECT_SUCCESS, |
| "2MB mremap - Source 1MB-aligned, Destination PTE-aligned"), |
| MAKE_TEST(_1MB, _1MB, _2MB, NON_OVERLAPPING, EXPECT_SUCCESS, |
| "2MB mremap - Source 1MB-aligned, Destination 1MB-aligned"), |
| |
| /* Src addr PMD aligned */ |
| MAKE_TEST(PMD, PTE, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS, |
| "4MB mremap - Source PMD-aligned, Destination PTE-aligned"), |
| MAKE_TEST(PMD, _1MB, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS, |
| "4MB mremap - Source PMD-aligned, Destination 1MB-aligned"), |
| MAKE_TEST(PMD, PMD, _4MB, NON_OVERLAPPING, EXPECT_SUCCESS, |
| "4MB mremap - Source PMD-aligned, Destination PMD-aligned"), |
| |
| /* Src addr PUD aligned */ |
| MAKE_TEST(PUD, PTE, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS, |
| "2GB mremap - Source PUD-aligned, Destination PTE-aligned"), |
| MAKE_TEST(PUD, _1MB, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS, |
| "2GB mremap - Source PUD-aligned, Destination 1MB-aligned"), |
| MAKE_TEST(PUD, PMD, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS, |
| "2GB mremap - Source PUD-aligned, Destination PMD-aligned"), |
| MAKE_TEST(PUD, PUD, _2GB, NON_OVERLAPPING, EXPECT_SUCCESS, |
| "2GB mremap - Source PUD-aligned, Destination PUD-aligned"), |
| }; |
| |
| struct test perf_test_cases[] = { |
| /* |
| * mremap 1GB region - Page table level aligned time |
| * comparison. |
| */ |
| MAKE_TEST(PTE, PTE, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS, |
| "1GB mremap - Source PTE-aligned, Destination PTE-aligned"), |
| MAKE_TEST(PMD, PMD, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS, |
| "1GB mremap - Source PMD-aligned, Destination PMD-aligned"), |
| MAKE_TEST(PUD, PUD, _1GB, NON_OVERLAPPING, EXPECT_SUCCESS, |
| "1GB mremap - Source PUD-aligned, Destination PUD-aligned"), |
| }; |
| |
| run_perf_tests = (threshold_mb == VALIDATION_NO_THRESHOLD) || |
| (threshold_mb * _1MB >= _1GB); |
| |
| ksft_set_plan(ARRAY_SIZE(test_cases) + (run_perf_tests ? |
| ARRAY_SIZE(perf_test_cases) : 0)); |
| |
| for (i = 0; i < ARRAY_SIZE(test_cases); i++) |
| run_mremap_test_case(test_cases[i], &failures, threshold_mb, |
| pattern_seed); |
| |
| if (run_perf_tests) { |
| ksft_print_msg("\n%s\n", |
| "mremap HAVE_MOVE_PMD/PUD optimization time comparison for 1GB region:"); |
| for (i = 0; i < ARRAY_SIZE(perf_test_cases); i++) |
| run_mremap_test_case(perf_test_cases[i], &failures, |
| threshold_mb, pattern_seed); |
| } |
| |
| if (failures > 0) |
| ksft_exit_fail(); |
| else |
| ksft_exit_pass(); |
| } |