| /* |
| * x86 FPU boot time init code |
| */ |
| #include <asm/fpu-internal.h> |
| #include <asm/tlbflush.h> |
| |
| /* |
| * Boot time CPU/FPU FDIV bug detection code: |
| */ |
| |
| static double __initdata x = 4195835.0; |
| static double __initdata y = 3145727.0; |
| |
| /* |
| * This used to check for exceptions.. |
| * However, it turns out that to support that, |
| * the XMM trap handlers basically had to |
| * be buggy. So let's have a correct XMM trap |
| * handler, and forget about printing out |
| * some status at boot. |
| * |
| * We should really only care about bugs here |
| * anyway. Not features. |
| */ |
| static void __init check_fpu(void) |
| { |
| s32 fdiv_bug; |
| |
| kernel_fpu_begin(); |
| |
| /* |
| * trap_init() enabled FXSR and company _before_ testing for FP |
| * problems here. |
| * |
| * Test for the divl bug: http://en.wikipedia.org/wiki/Fdiv_bug |
| */ |
| __asm__("fninit\n\t" |
| "fldl %1\n\t" |
| "fdivl %2\n\t" |
| "fmull %2\n\t" |
| "fldl %1\n\t" |
| "fsubp %%st,%%st(1)\n\t" |
| "fistpl %0\n\t" |
| "fwait\n\t" |
| "fninit" |
| : "=m" (*&fdiv_bug) |
| : "m" (*&x), "m" (*&y)); |
| |
| kernel_fpu_end(); |
| |
| if (fdiv_bug) { |
| set_cpu_bug(&boot_cpu_data, X86_BUG_FDIV); |
| pr_warn("Hmm, FPU with FDIV bug\n"); |
| } |
| } |
| |
| void fpu__init_check_bugs(void) |
| { |
| /* |
| * kernel_fpu_begin/end() in check_fpu() relies on the patched |
| * alternative instructions. |
| */ |
| if (cpu_has_fpu) |
| check_fpu(); |
| } |
| |
| /* |
| * Boot time FPU feature detection code: |
| */ |
| unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu; |
| unsigned int xstate_size; |
| EXPORT_SYMBOL_GPL(xstate_size); |
| static struct i387_fxsave_struct fx_scratch; |
| |
| static void mxcsr_feature_mask_init(void) |
| { |
| unsigned long mask = 0; |
| |
| if (cpu_has_fxsr) { |
| memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct)); |
| asm volatile("fxsave %0" : "+m" (fx_scratch)); |
| mask = fx_scratch.mxcsr_mask; |
| if (mask == 0) |
| mask = 0x0000ffbf; |
| } |
| mxcsr_feature_mask &= mask; |
| } |
| |
| static void fpstate_xstate_init_size(void) |
| { |
| /* |
| * Note that xstate_size might be overwriten later during |
| * xsave_init(). |
| */ |
| |
| if (!cpu_has_fpu) { |
| /* |
| * Disable xsave as we do not support it if i387 |
| * emulation is enabled. |
| */ |
| setup_clear_cpu_cap(X86_FEATURE_XSAVE); |
| setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT); |
| xstate_size = sizeof(struct i387_soft_struct); |
| return; |
| } |
| |
| if (cpu_has_fxsr) |
| xstate_size = sizeof(struct i387_fxsave_struct); |
| else |
| xstate_size = sizeof(struct i387_fsave_struct); |
| } |
| |
| /* |
| * Called on the boot CPU at bootup to set up the initial FPU state that |
| * is later cloned into all processes. |
| * |
| * Also called on secondary CPUs to set up the FPU state of their |
| * idle threads. |
| */ |
| void fpu__cpu_init(void) |
| { |
| unsigned long cr0; |
| unsigned long cr4_mask = 0; |
| |
| #ifndef CONFIG_MATH_EMULATION |
| if (!cpu_has_fpu) { |
| pr_emerg("No FPU found and no math emulation present\n"); |
| pr_emerg("Giving up\n"); |
| for (;;) |
| asm volatile("hlt"); |
| } |
| #endif |
| if (cpu_has_fxsr) |
| cr4_mask |= X86_CR4_OSFXSR; |
| if (cpu_has_xmm) |
| cr4_mask |= X86_CR4_OSXMMEXCPT; |
| if (cr4_mask) |
| cr4_set_bits(cr4_mask); |
| |
| cr0 = read_cr0(); |
| cr0 &= ~(X86_CR0_TS|X86_CR0_EM); /* clear TS and EM */ |
| if (!cpu_has_fpu) |
| cr0 |= X86_CR0_EM; |
| write_cr0(cr0); |
| |
| /* |
| * fpstate_xstate_init_size() is only called once, to avoid overriding |
| * 'xstate_size' during (secondary CPU) bootup or during CPU hotplug. |
| */ |
| if (xstate_size == 0) |
| fpstate_xstate_init_size(); |
| |
| mxcsr_feature_mask_init(); |
| xsave_init(); |
| eager_fpu_init(); |
| } |
| |
| static int __init no_387(char *s) |
| { |
| setup_clear_cpu_cap(X86_FEATURE_FPU); |
| return 1; |
| } |
| |
| __setup("no387", no_387); |
| |
| /* |
| * Set the X86_FEATURE_FPU CPU-capability bit based on |
| * trying to execute an actual sequence of FPU instructions: |
| */ |
| void fpu__detect(struct cpuinfo_x86 *c) |
| { |
| unsigned long cr0; |
| u16 fsw, fcw; |
| |
| fsw = fcw = 0xffff; |
| |
| cr0 = read_cr0(); |
| cr0 &= ~(X86_CR0_TS | X86_CR0_EM); |
| write_cr0(cr0); |
| |
| asm volatile("fninit ; fnstsw %0 ; fnstcw %1" |
| : "+m" (fsw), "+m" (fcw)); |
| |
| if (fsw == 0 && (fcw & 0x103f) == 0x003f) |
| set_cpu_cap(c, X86_FEATURE_FPU); |
| else |
| clear_cpu_cap(c, X86_FEATURE_FPU); |
| |
| /* The final cr0 value is set in fpu_init() */ |
| } |