| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * IIO rescale driver |
| * |
| * Copyright (C) 2018 Axentia Technologies AB |
| * Copyright (C) 2022 Liam Beguin <liambeguin@gmail.com> |
| * |
| * Author: Peter Rosin <peda@axentia.se> |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/gcd.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| |
| #include <linux/iio/afe/rescale.h> |
| #include <linux/iio/consumer.h> |
| #include <linux/iio/iio.h> |
| |
| int rescale_process_scale(struct rescale *rescale, int scale_type, |
| int *val, int *val2) |
| { |
| s64 tmp; |
| int _val, _val2; |
| s32 rem, rem2; |
| u32 mult; |
| u32 neg; |
| |
| switch (scale_type) { |
| case IIO_VAL_INT: |
| *val *= rescale->numerator; |
| if (rescale->denominator == 1) |
| return scale_type; |
| *val2 = rescale->denominator; |
| return IIO_VAL_FRACTIONAL; |
| case IIO_VAL_FRACTIONAL: |
| /* |
| * When the product of both scales doesn't overflow, avoid |
| * potential accuracy loss (for in kernel consumers) by |
| * keeping a fractional representation. |
| */ |
| if (!check_mul_overflow(*val, rescale->numerator, &_val) && |
| !check_mul_overflow(*val2, rescale->denominator, &_val2)) { |
| *val = _val; |
| *val2 = _val2; |
| return IIO_VAL_FRACTIONAL; |
| } |
| fallthrough; |
| case IIO_VAL_FRACTIONAL_LOG2: |
| tmp = (s64)*val * 1000000000LL; |
| tmp = div_s64(tmp, rescale->denominator); |
| tmp *= rescale->numerator; |
| |
| tmp = div_s64_rem(tmp, 1000000000LL, &rem); |
| *val = tmp; |
| |
| if (!rem) |
| return scale_type; |
| |
| if (scale_type == IIO_VAL_FRACTIONAL) |
| tmp = *val2; |
| else |
| tmp = ULL(1) << *val2; |
| |
| rem2 = *val % (int)tmp; |
| *val = *val / (int)tmp; |
| |
| *val2 = rem / (int)tmp; |
| if (rem2) |
| *val2 += div_s64((s64)rem2 * 1000000000LL, tmp); |
| |
| return IIO_VAL_INT_PLUS_NANO; |
| case IIO_VAL_INT_PLUS_NANO: |
| case IIO_VAL_INT_PLUS_MICRO: |
| mult = scale_type == IIO_VAL_INT_PLUS_NANO ? 1000000000L : 1000000L; |
| |
| /* |
| * For IIO_VAL_INT_PLUS_{MICRO,NANO} scale types if either *val |
| * OR *val2 is negative the schan scale is negative, i.e. |
| * *val = 1 and *val2 = -0.5 yields -1.5 not -0.5. |
| */ |
| neg = *val < 0 || *val2 < 0; |
| |
| tmp = (s64)abs(*val) * abs(rescale->numerator); |
| *val = div_s64_rem(tmp, abs(rescale->denominator), &rem); |
| |
| tmp = (s64)rem * mult + (s64)abs(*val2) * abs(rescale->numerator); |
| tmp = div_s64(tmp, abs(rescale->denominator)); |
| |
| *val += div_s64_rem(tmp, mult, val2); |
| |
| /* |
| * If only one of the rescaler elements or the schan scale is |
| * negative, the combined scale is negative. |
| */ |
| if (neg ^ ((rescale->numerator < 0) ^ (rescale->denominator < 0))) { |
| if (*val) |
| *val = -*val; |
| else |
| *val2 = -*val2; |
| } |
| |
| return scale_type; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| int rescale_process_offset(struct rescale *rescale, int scale_type, |
| int scale, int scale2, int schan_off, |
| int *val, int *val2) |
| { |
| s64 tmp, tmp2; |
| |
| switch (scale_type) { |
| case IIO_VAL_FRACTIONAL: |
| tmp = (s64)rescale->offset * scale2; |
| *val = div_s64(tmp, scale) + schan_off; |
| return IIO_VAL_INT; |
| case IIO_VAL_INT: |
| *val = div_s64(rescale->offset, scale) + schan_off; |
| return IIO_VAL_INT; |
| case IIO_VAL_FRACTIONAL_LOG2: |
| tmp = (s64)rescale->offset * (1 << scale2); |
| *val = div_s64(tmp, scale) + schan_off; |
| return IIO_VAL_INT; |
| case IIO_VAL_INT_PLUS_NANO: |
| tmp = (s64)rescale->offset * 1000000000LL; |
| tmp2 = ((s64)scale * 1000000000LL) + scale2; |
| *val = div64_s64(tmp, tmp2) + schan_off; |
| return IIO_VAL_INT; |
| case IIO_VAL_INT_PLUS_MICRO: |
| tmp = (s64)rescale->offset * 1000000LL; |
| tmp2 = ((s64)scale * 1000000LL) + scale2; |
| *val = div64_s64(tmp, tmp2) + schan_off; |
| return IIO_VAL_INT; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int rescale_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct rescale *rescale = iio_priv(indio_dev); |
| int scale, scale2; |
| int schan_off = 0; |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| if (rescale->chan_processed) |
| /* |
| * When only processed channels are supported, we |
| * read the processed data and scale it by 1/1 |
| * augmented with whatever the rescaler has calculated. |
| */ |
| return iio_read_channel_processed(rescale->source, val); |
| else |
| return iio_read_channel_raw(rescale->source, val); |
| |
| case IIO_CHAN_INFO_SCALE: |
| if (rescale->chan_processed) { |
| /* |
| * Processed channels are scaled 1-to-1 |
| */ |
| *val = 1; |
| *val2 = 1; |
| ret = IIO_VAL_FRACTIONAL; |
| } else { |
| ret = iio_read_channel_scale(rescale->source, val, val2); |
| } |
| return rescale_process_scale(rescale, ret, val, val2); |
| case IIO_CHAN_INFO_OFFSET: |
| /* |
| * Processed channels are scaled 1-to-1 and source offset is |
| * already taken into account. |
| * |
| * In other cases, real world measurement are expressed as: |
| * |
| * schan_scale * (raw + schan_offset) |
| * |
| * Given that the rescaler parameters are applied recursively: |
| * |
| * rescaler_scale * (schan_scale * (raw + schan_offset) + |
| * rescaler_offset) |
| * |
| * Or, |
| * |
| * (rescaler_scale * schan_scale) * (raw + |
| * (schan_offset + rescaler_offset / schan_scale) |
| * |
| * Thus, reusing the original expression the parameters exposed |
| * to userspace are: |
| * |
| * scale = schan_scale * rescaler_scale |
| * offset = schan_offset + rescaler_offset / schan_scale |
| */ |
| if (rescale->chan_processed) { |
| *val = rescale->offset; |
| return IIO_VAL_INT; |
| } |
| |
| if (iio_channel_has_info(rescale->source->channel, |
| IIO_CHAN_INFO_OFFSET)) { |
| ret = iio_read_channel_offset(rescale->source, |
| &schan_off, NULL); |
| if (ret != IIO_VAL_INT) |
| return ret < 0 ? ret : -EOPNOTSUPP; |
| } |
| |
| ret = iio_read_channel_scale(rescale->source, &scale, &scale2); |
| return rescale_process_offset(rescale, ret, scale, scale2, |
| schan_off, val, val2); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int rescale_read_avail(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| const int **vals, int *type, int *length, |
| long mask) |
| { |
| struct rescale *rescale = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| *type = IIO_VAL_INT; |
| return iio_read_avail_channel_raw(rescale->source, |
| vals, length); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_info rescale_info = { |
| .read_raw = rescale_read_raw, |
| .read_avail = rescale_read_avail, |
| }; |
| |
| static ssize_t rescale_read_ext_info(struct iio_dev *indio_dev, |
| uintptr_t private, |
| struct iio_chan_spec const *chan, |
| char *buf) |
| { |
| struct rescale *rescale = iio_priv(indio_dev); |
| |
| return iio_read_channel_ext_info(rescale->source, |
| rescale->ext_info[private].name, |
| buf); |
| } |
| |
| static ssize_t rescale_write_ext_info(struct iio_dev *indio_dev, |
| uintptr_t private, |
| struct iio_chan_spec const *chan, |
| const char *buf, size_t len) |
| { |
| struct rescale *rescale = iio_priv(indio_dev); |
| |
| return iio_write_channel_ext_info(rescale->source, |
| rescale->ext_info[private].name, |
| buf, len); |
| } |
| |
| static int rescale_configure_channel(struct device *dev, |
| struct rescale *rescale) |
| { |
| struct iio_chan_spec *chan = &rescale->chan; |
| struct iio_chan_spec const *schan = rescale->source->channel; |
| |
| chan->indexed = 1; |
| chan->output = schan->output; |
| chan->ext_info = rescale->ext_info; |
| chan->type = rescale->cfg->type; |
| |
| if (iio_channel_has_info(schan, IIO_CHAN_INFO_RAW) && |
| iio_channel_has_info(schan, IIO_CHAN_INFO_SCALE)) { |
| dev_info(dev, "using raw+scale source channel\n"); |
| } else if (iio_channel_has_info(schan, IIO_CHAN_INFO_PROCESSED)) { |
| dev_info(dev, "using processed channel\n"); |
| rescale->chan_processed = true; |
| } else { |
| dev_err(dev, "source channel is not supported\n"); |
| return -EINVAL; |
| } |
| |
| chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_SCALE); |
| |
| if (rescale->offset) |
| chan->info_mask_separate |= BIT(IIO_CHAN_INFO_OFFSET); |
| |
| /* |
| * Using .read_avail() is fringe to begin with and makes no sense |
| * whatsoever for processed channels, so we make sure that this cannot |
| * be called on a processed channel. |
| */ |
| if (iio_channel_has_available(schan, IIO_CHAN_INFO_RAW) && |
| !rescale->chan_processed) |
| chan->info_mask_separate_available |= BIT(IIO_CHAN_INFO_RAW); |
| |
| return 0; |
| } |
| |
| static int rescale_current_sense_amplifier_props(struct device *dev, |
| struct rescale *rescale) |
| { |
| u32 sense; |
| u32 gain_mult = 1; |
| u32 gain_div = 1; |
| u32 factor; |
| int ret; |
| |
| ret = device_property_read_u32(dev, "sense-resistor-micro-ohms", |
| &sense); |
| if (ret) { |
| dev_err(dev, "failed to read the sense resistance: %d\n", ret); |
| return ret; |
| } |
| |
| device_property_read_u32(dev, "sense-gain-mult", &gain_mult); |
| device_property_read_u32(dev, "sense-gain-div", &gain_div); |
| |
| /* |
| * Calculate the scaling factor, 1 / (gain * sense), or |
| * gain_div / (gain_mult * sense), while trying to keep the |
| * numerator/denominator from overflowing. |
| */ |
| factor = gcd(sense, 1000000); |
| rescale->numerator = 1000000 / factor; |
| rescale->denominator = sense / factor; |
| |
| factor = gcd(rescale->numerator, gain_mult); |
| rescale->numerator /= factor; |
| rescale->denominator *= gain_mult / factor; |
| |
| factor = gcd(rescale->denominator, gain_div); |
| rescale->numerator *= gain_div / factor; |
| rescale->denominator /= factor; |
| |
| return 0; |
| } |
| |
| static int rescale_current_sense_shunt_props(struct device *dev, |
| struct rescale *rescale) |
| { |
| u32 shunt; |
| u32 factor; |
| int ret; |
| |
| ret = device_property_read_u32(dev, "shunt-resistor-micro-ohms", |
| &shunt); |
| if (ret) { |
| dev_err(dev, "failed to read the shunt resistance: %d\n", ret); |
| return ret; |
| } |
| |
| factor = gcd(shunt, 1000000); |
| rescale->numerator = 1000000 / factor; |
| rescale->denominator = shunt / factor; |
| |
| return 0; |
| } |
| |
| static int rescale_voltage_divider_props(struct device *dev, |
| struct rescale *rescale) |
| { |
| int ret; |
| u32 factor; |
| |
| ret = device_property_read_u32(dev, "output-ohms", |
| &rescale->denominator); |
| if (ret) { |
| dev_err(dev, "failed to read output-ohms: %d\n", ret); |
| return ret; |
| } |
| |
| ret = device_property_read_u32(dev, "full-ohms", |
| &rescale->numerator); |
| if (ret) { |
| dev_err(dev, "failed to read full-ohms: %d\n", ret); |
| return ret; |
| } |
| |
| factor = gcd(rescale->numerator, rescale->denominator); |
| rescale->numerator /= factor; |
| rescale->denominator /= factor; |
| |
| return 0; |
| } |
| |
| static int rescale_temp_sense_rtd_props(struct device *dev, |
| struct rescale *rescale) |
| { |
| u32 factor; |
| u32 alpha; |
| u32 iexc; |
| u32 tmp; |
| int ret; |
| u32 r0; |
| |
| ret = device_property_read_u32(dev, "excitation-current-microamp", |
| &iexc); |
| if (ret) { |
| dev_err(dev, "failed to read excitation-current-microamp: %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = device_property_read_u32(dev, "alpha-ppm-per-celsius", &alpha); |
| if (ret) { |
| dev_err(dev, "failed to read alpha-ppm-per-celsius: %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = device_property_read_u32(dev, "r-naught-ohms", &r0); |
| if (ret) { |
| dev_err(dev, "failed to read r-naught-ohms: %d\n", ret); |
| return ret; |
| } |
| |
| tmp = r0 * iexc * alpha / 1000000; |
| factor = gcd(tmp, 1000000); |
| rescale->numerator = 1000000 / factor; |
| rescale->denominator = tmp / factor; |
| |
| rescale->offset = -1 * ((r0 * iexc) / 1000); |
| |
| return 0; |
| } |
| |
| static int rescale_temp_transducer_props(struct device *dev, |
| struct rescale *rescale) |
| { |
| s32 offset = 0; |
| s32 sense = 1; |
| s32 alpha; |
| int ret; |
| |
| device_property_read_u32(dev, "sense-offset-millicelsius", &offset); |
| device_property_read_u32(dev, "sense-resistor-ohms", &sense); |
| ret = device_property_read_u32(dev, "alpha-ppm-per-celsius", &alpha); |
| if (ret) { |
| dev_err(dev, "failed to read alpha-ppm-per-celsius: %d\n", ret); |
| return ret; |
| } |
| |
| rescale->numerator = 1000000; |
| rescale->denominator = alpha * sense; |
| |
| rescale->offset = div_s64((s64)offset * rescale->denominator, |
| rescale->numerator); |
| |
| return 0; |
| } |
| |
| enum rescale_variant { |
| CURRENT_SENSE_AMPLIFIER, |
| CURRENT_SENSE_SHUNT, |
| VOLTAGE_DIVIDER, |
| TEMP_SENSE_RTD, |
| TEMP_TRANSDUCER, |
| }; |
| |
| static const struct rescale_cfg rescale_cfg[] = { |
| [CURRENT_SENSE_AMPLIFIER] = { |
| .type = IIO_CURRENT, |
| .props = rescale_current_sense_amplifier_props, |
| }, |
| [CURRENT_SENSE_SHUNT] = { |
| .type = IIO_CURRENT, |
| .props = rescale_current_sense_shunt_props, |
| }, |
| [VOLTAGE_DIVIDER] = { |
| .type = IIO_VOLTAGE, |
| .props = rescale_voltage_divider_props, |
| }, |
| [TEMP_SENSE_RTD] = { |
| .type = IIO_TEMP, |
| .props = rescale_temp_sense_rtd_props, |
| }, |
| [TEMP_TRANSDUCER] = { |
| .type = IIO_TEMP, |
| .props = rescale_temp_transducer_props, |
| }, |
| }; |
| |
| static const struct of_device_id rescale_match[] = { |
| { .compatible = "current-sense-amplifier", |
| .data = &rescale_cfg[CURRENT_SENSE_AMPLIFIER], }, |
| { .compatible = "current-sense-shunt", |
| .data = &rescale_cfg[CURRENT_SENSE_SHUNT], }, |
| { .compatible = "voltage-divider", |
| .data = &rescale_cfg[VOLTAGE_DIVIDER], }, |
| { .compatible = "temperature-sense-rtd", |
| .data = &rescale_cfg[TEMP_SENSE_RTD], }, |
| { .compatible = "temperature-transducer", |
| .data = &rescale_cfg[TEMP_TRANSDUCER], }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, rescale_match); |
| |
| static int rescale_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct iio_dev *indio_dev; |
| struct iio_channel *source; |
| struct rescale *rescale; |
| int sizeof_ext_info; |
| int sizeof_priv; |
| int i; |
| int ret; |
| |
| source = devm_iio_channel_get(dev, NULL); |
| if (IS_ERR(source)) |
| return dev_err_probe(dev, PTR_ERR(source), |
| "failed to get source channel\n"); |
| |
| sizeof_ext_info = iio_get_channel_ext_info_count(source); |
| if (sizeof_ext_info) { |
| sizeof_ext_info += 1; /* one extra entry for the sentinel */ |
| sizeof_ext_info *= sizeof(*rescale->ext_info); |
| } |
| |
| sizeof_priv = sizeof(*rescale) + sizeof_ext_info; |
| |
| indio_dev = devm_iio_device_alloc(dev, sizeof_priv); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| rescale = iio_priv(indio_dev); |
| |
| rescale->cfg = device_get_match_data(dev); |
| rescale->numerator = 1; |
| rescale->denominator = 1; |
| rescale->offset = 0; |
| |
| ret = rescale->cfg->props(dev, rescale); |
| if (ret) |
| return ret; |
| |
| if (!rescale->numerator || !rescale->denominator) { |
| dev_err(dev, "invalid scaling factor.\n"); |
| return -EINVAL; |
| } |
| |
| platform_set_drvdata(pdev, indio_dev); |
| |
| rescale->source = source; |
| |
| indio_dev->name = dev_name(dev); |
| indio_dev->info = &rescale_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = &rescale->chan; |
| indio_dev->num_channels = 1; |
| if (sizeof_ext_info) { |
| rescale->ext_info = devm_kmemdup(dev, |
| source->channel->ext_info, |
| sizeof_ext_info, GFP_KERNEL); |
| if (!rescale->ext_info) |
| return -ENOMEM; |
| |
| for (i = 0; rescale->ext_info[i].name; ++i) { |
| struct iio_chan_spec_ext_info *ext_info = |
| &rescale->ext_info[i]; |
| |
| if (source->channel->ext_info[i].read) |
| ext_info->read = rescale_read_ext_info; |
| if (source->channel->ext_info[i].write) |
| ext_info->write = rescale_write_ext_info; |
| ext_info->private = i; |
| } |
| } |
| |
| ret = rescale_configure_channel(dev, rescale); |
| if (ret) |
| return ret; |
| |
| return devm_iio_device_register(dev, indio_dev); |
| } |
| |
| static struct platform_driver rescale_driver = { |
| .probe = rescale_probe, |
| .driver = { |
| .name = "iio-rescale", |
| .of_match_table = rescale_match, |
| }, |
| }; |
| module_platform_driver(rescale_driver); |
| |
| MODULE_DESCRIPTION("IIO rescale driver"); |
| MODULE_AUTHOR("Peter Rosin <peda@axentia.se>"); |
| MODULE_LICENSE("GPL v2"); |