| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * STMicroelectronics hts221 sensor driver |
| * |
| * Copyright 2016 STMicroelectronics Inc. |
| * |
| * Lorenzo Bianconi <lorenzo.bianconi@st.com> |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/interrupt.h> |
| #include <linux/irqreturn.h> |
| #include <linux/regmap.h> |
| #include <linux/bitfield.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/trigger.h> |
| #include <linux/iio/events.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/iio/buffer.h> |
| |
| #include <linux/platform_data/st_sensors_pdata.h> |
| |
| #include "hts221.h" |
| |
| #define HTS221_REG_DRDY_HL_ADDR 0x22 |
| #define HTS221_REG_DRDY_HL_MASK BIT(7) |
| #define HTS221_REG_DRDY_PP_OD_ADDR 0x22 |
| #define HTS221_REG_DRDY_PP_OD_MASK BIT(6) |
| #define HTS221_REG_DRDY_EN_ADDR 0x22 |
| #define HTS221_REG_DRDY_EN_MASK BIT(2) |
| #define HTS221_REG_STATUS_ADDR 0x27 |
| #define HTS221_RH_DRDY_MASK BIT(1) |
| #define HTS221_TEMP_DRDY_MASK BIT(0) |
| |
| static int hts221_trig_set_state(struct iio_trigger *trig, bool state) |
| { |
| struct iio_dev *iio_dev = iio_trigger_get_drvdata(trig); |
| struct hts221_hw *hw = iio_priv(iio_dev); |
| |
| return regmap_update_bits(hw->regmap, HTS221_REG_DRDY_EN_ADDR, |
| HTS221_REG_DRDY_EN_MASK, |
| FIELD_PREP(HTS221_REG_DRDY_EN_MASK, state)); |
| } |
| |
| static const struct iio_trigger_ops hts221_trigger_ops = { |
| .set_trigger_state = hts221_trig_set_state, |
| }; |
| |
| static irqreturn_t hts221_trigger_handler_thread(int irq, void *private) |
| { |
| struct hts221_hw *hw = private; |
| int err, status; |
| |
| err = regmap_read(hw->regmap, HTS221_REG_STATUS_ADDR, &status); |
| if (err < 0) |
| return IRQ_HANDLED; |
| |
| /* |
| * H_DA bit (humidity data available) is routed to DRDY line. |
| * Humidity sample is computed after temperature one. |
| * Here we can assume data channels are both available if H_DA bit |
| * is set in status register |
| */ |
| if (!(status & HTS221_RH_DRDY_MASK)) |
| return IRQ_NONE; |
| |
| iio_trigger_poll_chained(hw->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| int hts221_allocate_trigger(struct iio_dev *iio_dev) |
| { |
| struct hts221_hw *hw = iio_priv(iio_dev); |
| struct st_sensors_platform_data *pdata = dev_get_platdata(hw->dev); |
| bool irq_active_low = false, open_drain = false; |
| unsigned long irq_type; |
| int err; |
| |
| irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq)); |
| |
| switch (irq_type) { |
| case IRQF_TRIGGER_HIGH: |
| case IRQF_TRIGGER_RISING: |
| break; |
| case IRQF_TRIGGER_LOW: |
| case IRQF_TRIGGER_FALLING: |
| irq_active_low = true; |
| break; |
| default: |
| dev_info(hw->dev, |
| "mode %lx unsupported, using IRQF_TRIGGER_RISING\n", |
| irq_type); |
| irq_type = IRQF_TRIGGER_RISING; |
| break; |
| } |
| |
| err = regmap_update_bits(hw->regmap, HTS221_REG_DRDY_HL_ADDR, |
| HTS221_REG_DRDY_HL_MASK, |
| FIELD_PREP(HTS221_REG_DRDY_HL_MASK, |
| irq_active_low)); |
| if (err < 0) |
| return err; |
| |
| if (device_property_read_bool(hw->dev, "drive-open-drain") || |
| (pdata && pdata->open_drain)) { |
| irq_type |= IRQF_SHARED; |
| open_drain = true; |
| } |
| |
| err = regmap_update_bits(hw->regmap, HTS221_REG_DRDY_PP_OD_ADDR, |
| HTS221_REG_DRDY_PP_OD_MASK, |
| FIELD_PREP(HTS221_REG_DRDY_PP_OD_MASK, |
| open_drain)); |
| if (err < 0) |
| return err; |
| |
| err = devm_request_threaded_irq(hw->dev, hw->irq, NULL, |
| hts221_trigger_handler_thread, |
| irq_type | IRQF_ONESHOT, |
| hw->name, hw); |
| if (err) { |
| dev_err(hw->dev, "failed to request trigger irq %d\n", |
| hw->irq); |
| return err; |
| } |
| |
| hw->trig = devm_iio_trigger_alloc(hw->dev, "%s-trigger", |
| iio_dev->name); |
| if (!hw->trig) |
| return -ENOMEM; |
| |
| iio_trigger_set_drvdata(hw->trig, iio_dev); |
| hw->trig->ops = &hts221_trigger_ops; |
| |
| err = devm_iio_trigger_register(hw->dev, hw->trig); |
| |
| iio_dev->trig = iio_trigger_get(hw->trig); |
| |
| return err; |
| } |
| |
| static int hts221_buffer_preenable(struct iio_dev *iio_dev) |
| { |
| return hts221_set_enable(iio_priv(iio_dev), true); |
| } |
| |
| static int hts221_buffer_postdisable(struct iio_dev *iio_dev) |
| { |
| return hts221_set_enable(iio_priv(iio_dev), false); |
| } |
| |
| static const struct iio_buffer_setup_ops hts221_buffer_ops = { |
| .preenable = hts221_buffer_preenable, |
| .postdisable = hts221_buffer_postdisable, |
| }; |
| |
| static irqreturn_t hts221_buffer_handler_thread(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *iio_dev = pf->indio_dev; |
| struct hts221_hw *hw = iio_priv(iio_dev); |
| struct iio_chan_spec const *ch; |
| int err; |
| |
| /* humidity data */ |
| ch = &iio_dev->channels[HTS221_SENSOR_H]; |
| err = regmap_bulk_read(hw->regmap, ch->address, |
| &hw->scan.channels[0], |
| sizeof(hw->scan.channels[0])); |
| if (err < 0) |
| goto out; |
| |
| /* temperature data */ |
| ch = &iio_dev->channels[HTS221_SENSOR_T]; |
| err = regmap_bulk_read(hw->regmap, ch->address, |
| &hw->scan.channels[1], |
| sizeof(hw->scan.channels[1])); |
| if (err < 0) |
| goto out; |
| |
| iio_push_to_buffers_with_timestamp(iio_dev, &hw->scan, |
| iio_get_time_ns(iio_dev)); |
| |
| out: |
| iio_trigger_notify_done(hw->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| int hts221_allocate_buffers(struct iio_dev *iio_dev) |
| { |
| struct hts221_hw *hw = iio_priv(iio_dev); |
| return devm_iio_triggered_buffer_setup(hw->dev, iio_dev, |
| NULL, hts221_buffer_handler_thread, |
| &hts221_buffer_ops); |
| } |
| |
| MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@st.com>"); |
| MODULE_DESCRIPTION("STMicroelectronics hts221 buffer driver"); |
| MODULE_LICENSE("GPL v2"); |