| Tegra124 SoC SATA AHCI controller |
| |
| Required properties : |
| - compatible : "nvidia,tegra124-ahci". |
| - reg : Should contain 2 entries: |
| - AHCI register set (SATA BAR5) |
| - SATA register set |
| - interrupts : Defines the interrupt used by SATA |
| - clocks : Must contain an entry for each entry in clock-names. |
| See ../clocks/clock-bindings.txt for details. |
| - clock-names : Must include the following entries: |
| - sata |
| - sata-oob |
| - cml1 |
| - pll_e |
| - resets : Must contain an entry for each entry in reset-names. |
| See ../reset/reset.txt for details. |
| - reset-names : Must include the following entries: |
| - sata |
| - sata-oob |
| - sata-cold |
| - phys : Must contain an entry for each entry in phy-names. |
| See ../phy/phy-bindings.txt for details. |
| - phy-names : Must include the following entries: |
| - sata-phy : XUSB PADCTL SATA PHY |
| - hvdd-supply : Defines the SATA HVDD regulator |
| - vddio-supply : Defines the SATA VDDIO regulator |
| - avdd-supply : Defines the SATA AVDD regulator |
| - target-5v-supply : Defines the SATA 5V power regulator |
| - target-12v-supply : Defines the SATA 12V power regulator |
