| * AMD 10GbE PHY driver (amd-xgbe-phy) |
| |
| Required properties: |
| - compatible: Should be "amd,xgbe-phy-seattle-v1a" and |
| "ethernet-phy-ieee802.3-c45" |
| - reg: Address and length of the register sets for the device |
| - SerDes Rx/Tx registers |
| - SerDes integration registers (1/2) |
| - SerDes integration registers (2/2) |
| |
| Optional properties: |
| - amd,speed-set: Speed capabilities of the device |
| 0 - 1GbE and 10GbE (default) |
| 1 - 2.5GbE and 10GbE |
| |
| Example: |
| xgbe_phy@e1240800 { |
| compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45"; |
| reg = <0 0xe1240800 0 0x00400>, |
| <0 0xe1250000 0 0x00060>, |
| <0 0xe1250080 0 0x00004>; |
| amd,speed-set = <0>; |
| }; |
