| /* |
| * CPM serial console support. |
| * |
| * Copyright 2007 Freescale Semiconductor, Inc. |
| * Author: Scott Wood <scottwood@freescale.com> |
| * |
| * It is assumed that the firmware (or the platform file) has already set |
| * up the port. |
| */ |
| |
| #include "types.h" |
| #include "io.h" |
| #include "ops.h" |
| |
| struct cpm_scc { |
| u32 gsmrl; |
| u32 gsmrh; |
| u16 psmr; |
| u8 res1[2]; |
| u16 todr; |
| u16 dsr; |
| u16 scce; |
| u8 res2[2]; |
| u16 sccm; |
| u8 res3; |
| u8 sccs; |
| u8 res4[8]; |
| }; |
| |
| struct cpm_smc { |
| u8 res1[2]; |
| u16 smcmr; |
| u8 res2[2]; |
| u8 smce; |
| u8 res3[3]; |
| u8 smcm; |
| u8 res4[5]; |
| }; |
| |
| struct cpm_param { |
| u16 rbase; |
| u16 tbase; |
| u8 rfcr; |
| u8 tfcr; |
| }; |
| |
| struct cpm_bd { |
| u16 sc; /* Status and Control */ |
| u16 len; /* Data length in buffer */ |
| u8 *addr; /* Buffer address in host memory */ |
| }; |
| |
| static void *cpcr; |
| static struct cpm_param *param; |
| static struct cpm_smc *smc; |
| static struct cpm_scc *scc; |
| struct cpm_bd *tbdf, *rbdf; |
| static u32 cpm_cmd; |
| static u8 *muram_start; |
| static u32 muram_offset; |
| |
| static void (*do_cmd)(int op); |
| static void (*enable_port)(void); |
| static void (*disable_port)(void); |
| |
| #define CPM_CMD_STOP_TX 4 |
| #define CPM_CMD_RESTART_TX 6 |
| #define CPM_CMD_INIT_RX_TX 0 |
| |
| static void cpm1_cmd(int op) |
| { |
| while (in_be16(cpcr) & 1) |
| ; |
| |
| out_be16(cpcr, (op << 8) | cpm_cmd | 1); |
| |
| while (in_be16(cpcr) & 1) |
| ; |
| } |
| |
| static void cpm2_cmd(int op) |
| { |
| while (in_be32(cpcr) & 0x10000) |
| ; |
| |
| out_be32(cpcr, op | cpm_cmd | 0x10000); |
| |
| while (in_be32(cpcr) & 0x10000) |
| ; |
| } |
| |
| static void smc_disable_port(void) |
| { |
| do_cmd(CPM_CMD_STOP_TX); |
| out_be16(&smc->smcmr, in_be16(&smc->smcmr) & ~3); |
| } |
| |
| static void scc_disable_port(void) |
| { |
| do_cmd(CPM_CMD_STOP_TX); |
| out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) & ~0x30); |
| } |
| |
| static void smc_enable_port(void) |
| { |
| out_be16(&smc->smcmr, in_be16(&smc->smcmr) | 3); |
| do_cmd(CPM_CMD_RESTART_TX); |
| } |
| |
| static void scc_enable_port(void) |
| { |
| out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) | 0x30); |
| do_cmd(CPM_CMD_RESTART_TX); |
| } |
| |
| static int cpm_serial_open(void) |
| { |
| disable_port(); |
| |
| out_8(¶m->rfcr, 0x10); |
| out_8(¶m->tfcr, 0x10); |
| |
| rbdf = (struct cpm_bd *)muram_start; |
| rbdf->addr = (u8 *)(rbdf + 2); |
| rbdf->sc = 0xa000; |
| rbdf->len = 1; |
| |
| tbdf = rbdf + 1; |
| tbdf->addr = (u8 *)(rbdf + 2) + 1; |
| tbdf->sc = 0x2000; |
| tbdf->len = 1; |
| |
| sync(); |
| out_be16(¶m->rbase, muram_offset); |
| out_be16(¶m->tbase, muram_offset + sizeof(struct cpm_bd)); |
| |
| do_cmd(CPM_CMD_INIT_RX_TX); |
| |
| enable_port(); |
| return 0; |
| } |
| |
| static void cpm_serial_putc(unsigned char c) |
| { |
| while (tbdf->sc & 0x8000) |
| barrier(); |
| |
| sync(); |
| |
| tbdf->addr[0] = c; |
| eieio(); |
| tbdf->sc |= 0x8000; |
| } |
| |
| static unsigned char cpm_serial_tstc(void) |
| { |
| barrier(); |
| return !(rbdf->sc & 0x8000); |
| } |
| |
| static unsigned char cpm_serial_getc(void) |
| { |
| unsigned char c; |
| |
| while (!cpm_serial_tstc()) |
| ; |
| |
| sync(); |
| c = rbdf->addr[0]; |
| eieio(); |
| rbdf->sc |= 0x8000; |
| |
| return c; |
| } |
| |
| int cpm_console_init(void *devp, struct serial_console_data *scdp) |
| { |
| void *reg_virt[2]; |
| int is_smc = 0, is_cpm2 = 0, n; |
| unsigned long reg_phys; |
| void *parent, *muram; |
| |
| if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) { |
| is_smc = 1; |
| } else if (dt_is_compatible(devp, "fsl,cpm2-scc-uart")) { |
| is_cpm2 = 1; |
| } else if (dt_is_compatible(devp, "fsl,cpm2-smc-uart")) { |
| is_cpm2 = 1; |
| is_smc = 1; |
| } |
| |
| if (is_smc) { |
| enable_port = smc_enable_port; |
| disable_port = smc_disable_port; |
| } else { |
| enable_port = scc_enable_port; |
| disable_port = scc_disable_port; |
| } |
| |
| if (is_cpm2) |
| do_cmd = cpm2_cmd; |
| else |
| do_cmd = cpm1_cmd; |
| |
| n = getprop(devp, "fsl,cpm-command", &cpm_cmd, 4); |
| if (n < 4) |
| return -1; |
| |
| n = getprop(devp, "virtual-reg", reg_virt, sizeof(reg_virt)); |
| if (n < (int)sizeof(reg_virt)) { |
| for (n = 0; n < 2; n++) { |
| if (!dt_xlate_reg(devp, n, ®_phys, NULL)) |
| return -1; |
| |
| reg_virt[n] = (void *)reg_phys; |
| } |
| } |
| |
| if (is_smc) |
| smc = reg_virt[0]; |
| else |
| scc = reg_virt[0]; |
| |
| param = reg_virt[1]; |
| |
| parent = get_parent(devp); |
| if (!parent) |
| return -1; |
| |
| n = getprop(parent, "virtual-reg", reg_virt, sizeof(reg_virt)); |
| if (n < (int)sizeof(reg_virt)) { |
| if (!dt_xlate_reg(parent, 0, ®_phys, NULL)) |
| return -1; |
| |
| reg_virt[0] = (void *)reg_phys; |
| } |
| |
| cpcr = reg_virt[0]; |
| |
| muram = finddevice("/soc/cpm/muram/data"); |
| if (!muram) |
| return -1; |
| |
| /* For bootwrapper-compatible device trees, we assume that the first |
| * entry has at least 18 bytes, and that #address-cells/#data-cells |
| * is one for both parent and child. |
| */ |
| |
| n = getprop(muram, "virtual-reg", reg_virt, sizeof(reg_virt)); |
| if (n < (int)sizeof(reg_virt)) { |
| if (!dt_xlate_reg(muram, 0, ®_phys, NULL)) |
| return -1; |
| |
| reg_virt[0] = (void *)reg_phys; |
| } |
| |
| muram_start = reg_virt[0]; |
| |
| n = getprop(muram, "reg", &muram_offset, 4); |
| if (n < 4) |
| return -1; |
| |
| scdp->open = cpm_serial_open; |
| scdp->putc = cpm_serial_putc; |
| scdp->getc = cpm_serial_getc; |
| scdp->tstc = cpm_serial_tstc; |
| |
| return 0; |
| } |