| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mtd/partitions/partition.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Partition |
| |
| description: | |
| This binding describes a single flash partition. Each partition must have its |
| relative offset and size specified. Depending on partition function extra |
| properties can be used. |
| |
| maintainers: |
| - Rafał Miłecki <rafal@milecki.pl> |
| |
| properties: |
| reg: |
| description: partition's offset and size within the flash |
| maxItems: 1 |
| |
| label: |
| description: The label / name for this partition. If omitted, the label |
| is taken from the node name (excluding the unit address). |
| |
| read-only: |
| description: This parameter, if present, is a hint that this partition |
| should only be mounted read-only. This is usually used for flash |
| partitions containing early-boot firmware images or data which should |
| not be clobbered. |
| type: boolean |
| |
| lock: |
| description: Do not unlock the partition at initialization time (not |
| supported on all devices) |
| type: boolean |
| |
| slc-mode: |
| description: This parameter, if present, allows one to emulate SLC mode |
| on a partition attached to an MLC NAND thus making this partition |
| immune to paired-pages corruptions |
| type: boolean |
| |
| required: |
| - reg |
| |
| additionalProperties: true |