| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * ZyDAS ZD1301 driver (USB interface) |
| * |
| * Copyright (C) 2015 Antti Palosaari <crope@iki.fi> |
| */ |
| |
| #include "dvb_usb.h" |
| #include "zd1301_demod.h" |
| #include "mt2060.h" |
| #include <linux/i2c.h> |
| #include <linux/platform_device.h> |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| struct zd1301_dev { |
| #define BUF_LEN 8 |
| u8 buf[BUF_LEN]; /* bulk USB control message */ |
| struct zd1301_demod_platform_data demod_pdata; |
| struct mt2060_platform_data mt2060_pdata; |
| struct platform_device *platform_device_demod; |
| struct i2c_client *i2c_client_tuner; |
| }; |
| |
| static int zd1301_ctrl_msg(struct dvb_usb_device *d, const u8 *wbuf, |
| unsigned int wlen, u8 *rbuf, unsigned int rlen) |
| { |
| struct zd1301_dev *dev = d_to_priv(d); |
| struct usb_interface *intf = d->intf; |
| int ret, actual_length; |
| |
| mutex_lock(&d->usb_mutex); |
| |
| memcpy(&dev->buf, wbuf, wlen); |
| |
| dev_dbg(&intf->dev, ">>> %*ph\n", wlen, dev->buf); |
| |
| ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev, 0x04), dev->buf, |
| wlen, &actual_length, 1000); |
| if (ret) { |
| dev_err(&intf->dev, "1st usb_bulk_msg() failed %d\n", ret); |
| goto err_mutex_unlock; |
| } |
| |
| if (rlen) { |
| ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 0x83), |
| dev->buf, rlen, &actual_length, 1000); |
| if (ret) { |
| dev_err(&intf->dev, |
| "2nd usb_bulk_msg() failed %d\n", ret); |
| goto err_mutex_unlock; |
| } |
| |
| dev_dbg(&intf->dev, "<<< %*ph\n", actual_length, dev->buf); |
| |
| if (actual_length != rlen) { |
| /* |
| * Chip replies often with 3 byte len stub. On that case |
| * we have to query new reply. |
| */ |
| dev_dbg(&intf->dev, "repeating reply message\n"); |
| |
| ret = usb_bulk_msg(d->udev, |
| usb_rcvbulkpipe(d->udev, 0x83), |
| dev->buf, rlen, &actual_length, |
| 1000); |
| if (ret) { |
| dev_err(&intf->dev, |
| "3rd usb_bulk_msg() failed %d\n", ret); |
| goto err_mutex_unlock; |
| } |
| |
| dev_dbg(&intf->dev, |
| "<<< %*ph\n", actual_length, dev->buf); |
| } |
| |
| memcpy(rbuf, dev->buf, rlen); |
| } |
| |
| err_mutex_unlock: |
| mutex_unlock(&d->usb_mutex); |
| return ret; |
| } |
| |
| static int zd1301_demod_wreg(void *reg_priv, u16 reg, u8 val) |
| { |
| struct dvb_usb_device *d = reg_priv; |
| struct usb_interface *intf = d->intf; |
| int ret; |
| u8 buf[7] = {0x07, 0x00, 0x03, 0x01, |
| (reg >> 0) & 0xff, (reg >> 8) & 0xff, val}; |
| |
| ret = zd1301_ctrl_msg(d, buf, 7, NULL, 0); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&intf->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int zd1301_demod_rreg(void *reg_priv, u16 reg, u8 *val) |
| { |
| struct dvb_usb_device *d = reg_priv; |
| struct usb_interface *intf = d->intf; |
| int ret; |
| u8 buf[7] = {0x07, 0x00, 0x04, 0x01, |
| (reg >> 0) & 0xff, (reg >> 8) & 0xff, 0}; |
| |
| ret = zd1301_ctrl_msg(d, buf, 7, buf, 7); |
| if (ret) |
| goto err; |
| |
| *val = buf[6]; |
| |
| return 0; |
| err: |
| dev_dbg(&intf->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int zd1301_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvb_usb_device *d = adap_to_d(adap); |
| struct zd1301_dev *dev = adap_to_priv(adap); |
| struct usb_interface *intf = d->intf; |
| struct platform_device *pdev; |
| struct i2c_client *client; |
| struct i2c_board_info board_info; |
| struct i2c_adapter *adapter; |
| struct dvb_frontend *frontend; |
| int ret; |
| |
| dev_dbg(&intf->dev, "\n"); |
| |
| /* Add platform demod */ |
| dev->demod_pdata.reg_priv = d; |
| dev->demod_pdata.reg_read = zd1301_demod_rreg; |
| dev->demod_pdata.reg_write = zd1301_demod_wreg; |
| request_module("%s", "zd1301_demod"); |
| pdev = platform_device_register_data(&intf->dev, |
| "zd1301_demod", |
| PLATFORM_DEVID_AUTO, |
| &dev->demod_pdata, |
| sizeof(dev->demod_pdata)); |
| if (IS_ERR(pdev)) { |
| ret = PTR_ERR(pdev); |
| goto err; |
| } |
| if (!pdev->dev.driver) { |
| ret = -ENODEV; |
| goto err_platform_device_unregister; |
| } |
| if (!try_module_get(pdev->dev.driver->owner)) { |
| ret = -ENODEV; |
| goto err_platform_device_unregister; |
| } |
| |
| adapter = zd1301_demod_get_i2c_adapter(pdev); |
| frontend = zd1301_demod_get_dvb_frontend(pdev); |
| if (!adapter || !frontend) { |
| ret = -ENODEV; |
| goto err_module_put_demod; |
| } |
| |
| /* Add I2C tuner */ |
| dev->mt2060_pdata.i2c_write_max = 9; |
| dev->mt2060_pdata.dvb_frontend = frontend; |
| memset(&board_info, 0, sizeof(board_info)); |
| strscpy(board_info.type, "mt2060", I2C_NAME_SIZE); |
| board_info.addr = 0x60; |
| board_info.platform_data = &dev->mt2060_pdata; |
| request_module("%s", "mt2060"); |
| client = i2c_new_client_device(adapter, &board_info); |
| if (!i2c_client_has_driver(client)) { |
| ret = -ENODEV; |
| goto err_module_put_demod; |
| } |
| if (!try_module_get(client->dev.driver->owner)) { |
| ret = -ENODEV; |
| goto err_i2c_unregister_device; |
| } |
| |
| dev->platform_device_demod = pdev; |
| dev->i2c_client_tuner = client; |
| adap->fe[0] = frontend; |
| |
| return 0; |
| err_i2c_unregister_device: |
| i2c_unregister_device(client); |
| err_module_put_demod: |
| module_put(pdev->dev.driver->owner); |
| err_platform_device_unregister: |
| platform_device_unregister(pdev); |
| err: |
| dev_dbg(&intf->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static int zd1301_frontend_detach(struct dvb_usb_adapter *adap) |
| { |
| struct dvb_usb_device *d = adap_to_d(adap); |
| struct zd1301_dev *dev = d_to_priv(d); |
| struct usb_interface *intf = d->intf; |
| struct platform_device *pdev; |
| struct i2c_client *client; |
| |
| dev_dbg(&intf->dev, "\n"); |
| |
| client = dev->i2c_client_tuner; |
| pdev = dev->platform_device_demod; |
| |
| /* Remove I2C tuner */ |
| if (client) { |
| module_put(client->dev.driver->owner); |
| i2c_unregister_device(client); |
| } |
| |
| /* Remove platform demod */ |
| if (pdev) { |
| module_put(pdev->dev.driver->owner); |
| platform_device_unregister(pdev); |
| } |
| |
| return 0; |
| } |
| |
| static int zd1301_streaming_ctrl(struct dvb_frontend *fe, int onoff) |
| { |
| struct dvb_usb_device *d = fe_to_d(fe); |
| struct usb_interface *intf = d->intf; |
| int ret; |
| u8 buf[3] = {0x03, 0x00, onoff ? 0x07 : 0x08}; |
| |
| dev_dbg(&intf->dev, "onoff=%d\n", onoff); |
| |
| ret = zd1301_ctrl_msg(d, buf, 3, NULL, 0); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&intf->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| static const struct dvb_usb_device_properties zd1301_props = { |
| .driver_name = KBUILD_MODNAME, |
| .owner = THIS_MODULE, |
| .adapter_nr = adapter_nr, |
| .size_of_priv = sizeof(struct zd1301_dev), |
| |
| .frontend_attach = zd1301_frontend_attach, |
| .frontend_detach = zd1301_frontend_detach, |
| .streaming_ctrl = zd1301_streaming_ctrl, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .stream = DVB_USB_STREAM_BULK(0x81, 6, 21 * 188), |
| }, |
| }, |
| }; |
| |
| static const struct usb_device_id zd1301_id_table[] = { |
| {DVB_USB_DEVICE(USB_VID_ZYDAS, 0x13a1, &zd1301_props, |
| "ZyDAS ZD1301 reference design", NULL)}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(usb, zd1301_id_table); |
| |
| /* Usb specific object needed to register this driver with the usb subsystem */ |
| static struct usb_driver zd1301_usb_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = zd1301_id_table, |
| .probe = dvb_usbv2_probe, |
| .disconnect = dvb_usbv2_disconnect, |
| .suspend = dvb_usbv2_suspend, |
| .resume = dvb_usbv2_resume, |
| .reset_resume = dvb_usbv2_reset_resume, |
| .no_dynamic_id = 1, |
| .soft_unbind = 1, |
| }; |
| module_usb_driver(zd1301_usb_driver); |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("ZyDAS ZD1301 driver"); |
| MODULE_LICENSE("GPL"); |