| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * CXL Flash Device Driver |
| * |
| * Written by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>, IBM Corporation |
| * Matthew R. Ochs <mrochs@linux.vnet.ibm.com>, IBM Corporation |
| * |
| * Copyright (C) 2015 IBM Corporation |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/syscalls.h> |
| #include <asm/unaligned.h> |
| #include <asm/bitsperlong.h> |
| |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_host.h> |
| #include <uapi/scsi/cxlflash_ioctl.h> |
| |
| #include "sislite.h" |
| #include "common.h" |
| #include "vlun.h" |
| #include "superpipe.h" |
| |
| /** |
| * marshal_virt_to_resize() - translate uvirtual to resize structure |
| * @virt: Source structure from which to translate/copy. |
| * @resize: Destination structure for the translate/copy. |
| */ |
| static void marshal_virt_to_resize(struct dk_cxlflash_uvirtual *virt, |
| struct dk_cxlflash_resize *resize) |
| { |
| resize->hdr = virt->hdr; |
| resize->context_id = virt->context_id; |
| resize->rsrc_handle = virt->rsrc_handle; |
| resize->req_size = virt->lun_size; |
| resize->last_lba = virt->last_lba; |
| } |
| |
| /** |
| * marshal_clone_to_rele() - translate clone to release structure |
| * @clone: Source structure from which to translate/copy. |
| * @release: Destination structure for the translate/copy. |
| */ |
| static void marshal_clone_to_rele(struct dk_cxlflash_clone *clone, |
| struct dk_cxlflash_release *release) |
| { |
| release->hdr = clone->hdr; |
| release->context_id = clone->context_id_dst; |
| } |
| |
| /** |
| * ba_init() - initializes a block allocator |
| * @ba_lun: Block allocator to initialize. |
| * |
| * Return: 0 on success, -errno on failure |
| */ |
| static int ba_init(struct ba_lun *ba_lun) |
| { |
| struct ba_lun_info *bali = NULL; |
| int lun_size_au = 0, i = 0; |
| int last_word_underflow = 0; |
| u64 *lam; |
| |
| pr_debug("%s: Initializing LUN: lun_id=%016llx " |
| "ba_lun->lsize=%lx ba_lun->au_size=%lX\n", |
| __func__, ba_lun->lun_id, ba_lun->lsize, ba_lun->au_size); |
| |
| /* Calculate bit map size */ |
| lun_size_au = ba_lun->lsize / ba_lun->au_size; |
| if (lun_size_au == 0) { |
| pr_debug("%s: Requested LUN size of 0!\n", __func__); |
| return -EINVAL; |
| } |
| |
| /* Allocate lun information container */ |
| bali = kzalloc(sizeof(struct ba_lun_info), GFP_KERNEL); |
| if (unlikely(!bali)) { |
| pr_err("%s: Failed to allocate lun_info lun_id=%016llx\n", |
| __func__, ba_lun->lun_id); |
| return -ENOMEM; |
| } |
| |
| bali->total_aus = lun_size_au; |
| bali->lun_bmap_size = lun_size_au / BITS_PER_LONG; |
| |
| if (lun_size_au % BITS_PER_LONG) |
| bali->lun_bmap_size++; |
| |
| /* Allocate bitmap space */ |
| bali->lun_alloc_map = kzalloc((bali->lun_bmap_size * sizeof(u64)), |
| GFP_KERNEL); |
| if (unlikely(!bali->lun_alloc_map)) { |
| pr_err("%s: Failed to allocate lun allocation map: " |
| "lun_id=%016llx\n", __func__, ba_lun->lun_id); |
| kfree(bali); |
| return -ENOMEM; |
| } |
| |
| /* Initialize the bit map size and set all bits to '1' */ |
| bali->free_aun_cnt = lun_size_au; |
| |
| for (i = 0; i < bali->lun_bmap_size; i++) |
| bali->lun_alloc_map[i] = 0xFFFFFFFFFFFFFFFFULL; |
| |
| /* If the last word not fully utilized, mark extra bits as allocated */ |
| last_word_underflow = (bali->lun_bmap_size * BITS_PER_LONG); |
| last_word_underflow -= bali->free_aun_cnt; |
| if (last_word_underflow > 0) { |
| lam = &bali->lun_alloc_map[bali->lun_bmap_size - 1]; |
| for (i = (HIBIT - last_word_underflow + 1); |
| i < BITS_PER_LONG; |
| i++) |
| clear_bit(i, (ulong *)lam); |
| } |
| |
| /* Initialize high elevator index, low/curr already at 0 from kzalloc */ |
| bali->free_high_idx = bali->lun_bmap_size; |
| |
| /* Allocate clone map */ |
| bali->aun_clone_map = kzalloc((bali->total_aus * sizeof(u8)), |
| GFP_KERNEL); |
| if (unlikely(!bali->aun_clone_map)) { |
| pr_err("%s: Failed to allocate clone map: lun_id=%016llx\n", |
| __func__, ba_lun->lun_id); |
| kfree(bali->lun_alloc_map); |
| kfree(bali); |
| return -ENOMEM; |
| } |
| |
| /* Pass the allocated LUN info as a handle to the user */ |
| ba_lun->ba_lun_handle = bali; |
| |
| pr_debug("%s: Successfully initialized the LUN: " |
| "lun_id=%016llx bitmap size=%x, free_aun_cnt=%llx\n", |
| __func__, ba_lun->lun_id, bali->lun_bmap_size, |
| bali->free_aun_cnt); |
| return 0; |
| } |
| |
| /** |
| * find_free_range() - locates a free bit within the block allocator |
| * @low: First word in block allocator to start search. |
| * @high: Last word in block allocator to search. |
| * @bali: LUN information structure owning the block allocator to search. |
| * @bit_word: Passes back the word in the block allocator owning the free bit. |
| * |
| * Return: The bit position within the passed back word, -1 on failure |
| */ |
| static int find_free_range(u32 low, |
| u32 high, |
| struct ba_lun_info *bali, int *bit_word) |
| { |
| int i; |
| u64 bit_pos = -1; |
| ulong *lam, num_bits; |
| |
| for (i = low; i < high; i++) |
| if (bali->lun_alloc_map[i] != 0) { |
| lam = (ulong *)&bali->lun_alloc_map[i]; |
| num_bits = (sizeof(*lam) * BITS_PER_BYTE); |
| bit_pos = find_first_bit(lam, num_bits); |
| |
| pr_devel("%s: Found free bit %llu in LUN " |
| "map entry %016llx at bitmap index = %d\n", |
| __func__, bit_pos, bali->lun_alloc_map[i], i); |
| |
| *bit_word = i; |
| bali->free_aun_cnt--; |
| clear_bit(bit_pos, lam); |
| break; |
| } |
| |
| return bit_pos; |
| } |
| |
| /** |
| * ba_alloc() - allocates a block from the block allocator |
| * @ba_lun: Block allocator from which to allocate a block. |
| * |
| * Return: The allocated block, -1 on failure |
| */ |
| static u64 ba_alloc(struct ba_lun *ba_lun) |
| { |
| u64 bit_pos = -1; |
| int bit_word = 0; |
| struct ba_lun_info *bali = NULL; |
| |
| bali = ba_lun->ba_lun_handle; |
| |
| pr_debug("%s: Received block allocation request: " |
| "lun_id=%016llx free_aun_cnt=%llx\n", |
| __func__, ba_lun->lun_id, bali->free_aun_cnt); |
| |
| if (bali->free_aun_cnt == 0) { |
| pr_debug("%s: No space left on LUN: lun_id=%016llx\n", |
| __func__, ba_lun->lun_id); |
| return -1ULL; |
| } |
| |
| /* Search to find a free entry, curr->high then low->curr */ |
| bit_pos = find_free_range(bali->free_curr_idx, |
| bali->free_high_idx, bali, &bit_word); |
| if (bit_pos == -1) { |
| bit_pos = find_free_range(bali->free_low_idx, |
| bali->free_curr_idx, |
| bali, &bit_word); |
| if (bit_pos == -1) { |
| pr_debug("%s: Could not find an allocation unit on LUN:" |
| " lun_id=%016llx\n", __func__, ba_lun->lun_id); |
| return -1ULL; |
| } |
| } |
| |
| /* Update the free_curr_idx */ |
| if (bit_pos == HIBIT) |
| bali->free_curr_idx = bit_word + 1; |
| else |
| bali->free_curr_idx = bit_word; |
| |
| pr_debug("%s: Allocating AU number=%llx lun_id=%016llx " |
| "free_aun_cnt=%llx\n", __func__, |
| ((bit_word * BITS_PER_LONG) + bit_pos), ba_lun->lun_id, |
| bali->free_aun_cnt); |
| |
| return (u64) ((bit_word * BITS_PER_LONG) + bit_pos); |
| } |
| |
| /** |
| * validate_alloc() - validates the specified block has been allocated |
| * @bali: LUN info owning the block allocator. |
| * @aun: Block to validate. |
| * |
| * Return: 0 on success, -1 on failure |
| */ |
| static int validate_alloc(struct ba_lun_info *bali, u64 aun) |
| { |
| int idx = 0, bit_pos = 0; |
| |
| idx = aun / BITS_PER_LONG; |
| bit_pos = aun % BITS_PER_LONG; |
| |
| if (test_bit(bit_pos, (ulong *)&bali->lun_alloc_map[idx])) |
| return -1; |
| |
| return 0; |
| } |
| |
| /** |
| * ba_free() - frees a block from the block allocator |
| * @ba_lun: Block allocator from which to allocate a block. |
| * @to_free: Block to free. |
| * |
| * Return: 0 on success, -1 on failure |
| */ |
| static int ba_free(struct ba_lun *ba_lun, u64 to_free) |
| { |
| int idx = 0, bit_pos = 0; |
| struct ba_lun_info *bali = NULL; |
| |
| bali = ba_lun->ba_lun_handle; |
| |
| if (validate_alloc(bali, to_free)) { |
| pr_debug("%s: AUN %llx is not allocated on lun_id=%016llx\n", |
| __func__, to_free, ba_lun->lun_id); |
| return -1; |
| } |
| |
| pr_debug("%s: Received a request to free AU=%llx lun_id=%016llx " |
| "free_aun_cnt=%llx\n", __func__, to_free, ba_lun->lun_id, |
| bali->free_aun_cnt); |
| |
| if (bali->aun_clone_map[to_free] > 0) { |
| pr_debug("%s: AUN %llx lun_id=%016llx cloned. Clone count=%x\n", |
| __func__, to_free, ba_lun->lun_id, |
| bali->aun_clone_map[to_free]); |
| bali->aun_clone_map[to_free]--; |
| return 0; |
| } |
| |
| idx = to_free / BITS_PER_LONG; |
| bit_pos = to_free % BITS_PER_LONG; |
| |
| set_bit(bit_pos, (ulong *)&bali->lun_alloc_map[idx]); |
| bali->free_aun_cnt++; |
| |
| if (idx < bali->free_low_idx) |
| bali->free_low_idx = idx; |
| else if (idx > bali->free_high_idx) |
| bali->free_high_idx = idx; |
| |
| pr_debug("%s: Successfully freed AU bit_pos=%x bit map index=%x " |
| "lun_id=%016llx free_aun_cnt=%llx\n", __func__, bit_pos, idx, |
| ba_lun->lun_id, bali->free_aun_cnt); |
| |
| return 0; |
| } |
| |
| /** |
| * ba_clone() - Clone a chunk of the block allocation table |
| * @ba_lun: Block allocator from which to allocate a block. |
| * @to_clone: Block to clone. |
| * |
| * Return: 0 on success, -1 on failure |
| */ |
| static int ba_clone(struct ba_lun *ba_lun, u64 to_clone) |
| { |
| struct ba_lun_info *bali = ba_lun->ba_lun_handle; |
| |
| if (validate_alloc(bali, to_clone)) { |
| pr_debug("%s: AUN=%llx not allocated on lun_id=%016llx\n", |
| __func__, to_clone, ba_lun->lun_id); |
| return -1; |
| } |
| |
| pr_debug("%s: Received a request to clone AUN %llx on lun_id=%016llx\n", |
| __func__, to_clone, ba_lun->lun_id); |
| |
| if (bali->aun_clone_map[to_clone] == MAX_AUN_CLONE_CNT) { |
| pr_debug("%s: AUN %llx on lun_id=%016llx hit max clones already\n", |
| __func__, to_clone, ba_lun->lun_id); |
| return -1; |
| } |
| |
| bali->aun_clone_map[to_clone]++; |
| |
| return 0; |
| } |
| |
| /** |
| * ba_space() - returns the amount of free space left in the block allocator |
| * @ba_lun: Block allocator. |
| * |
| * Return: Amount of free space in block allocator |
| */ |
| static u64 ba_space(struct ba_lun *ba_lun) |
| { |
| struct ba_lun_info *bali = ba_lun->ba_lun_handle; |
| |
| return bali->free_aun_cnt; |
| } |
| |
| /** |
| * cxlflash_ba_terminate() - frees resources associated with the block allocator |
| * @ba_lun: Block allocator. |
| * |
| * Safe to call in a partially allocated state. |
| */ |
| void cxlflash_ba_terminate(struct ba_lun *ba_lun) |
| { |
| struct ba_lun_info *bali = ba_lun->ba_lun_handle; |
| |
| if (bali) { |
| kfree(bali->aun_clone_map); |
| kfree(bali->lun_alloc_map); |
| kfree(bali); |
| ba_lun->ba_lun_handle = NULL; |
| } |
| } |
| |
| /** |
| * init_vlun() - initializes a LUN for virtual use |
| * @lli: LUN information structure that owns the block allocator. |
| * |
| * Return: 0 on success, -errno on failure |
| */ |
| static int init_vlun(struct llun_info *lli) |
| { |
| int rc = 0; |
| struct glun_info *gli = lli->parent; |
| struct blka *blka = &gli->blka; |
| |
| memset(blka, 0, sizeof(*blka)); |
| mutex_init(&blka->mutex); |
| |
| /* LUN IDs are unique per port, save the index instead */ |
| blka->ba_lun.lun_id = lli->lun_index; |
| blka->ba_lun.lsize = gli->max_lba + 1; |
| blka->ba_lun.lba_size = gli->blk_len; |
| |
| blka->ba_lun.au_size = MC_CHUNK_SIZE; |
| blka->nchunk = blka->ba_lun.lsize / MC_CHUNK_SIZE; |
| |
| rc = ba_init(&blka->ba_lun); |
| if (unlikely(rc)) |
| pr_debug("%s: cannot init block_alloc, rc=%d\n", __func__, rc); |
| |
| pr_debug("%s: returning rc=%d lli=%p\n", __func__, rc, lli); |
| return rc; |
| } |
| |
| /** |
| * write_same16() - sends a SCSI WRITE_SAME16 (0) command to specified LUN |
| * @sdev: SCSI device associated with LUN. |
| * @lba: Logical block address to start write same. |
| * @nblks: Number of logical blocks to write same. |
| * |
| * The SCSI WRITE_SAME16 can take quite a while to complete. Should an EEH occur |
| * while in scsi_execute(), the EEH handler will attempt to recover. As part of |
| * the recovery, the handler drains all currently running ioctls, waiting until |
| * they have completed before proceeding with a reset. As this routine is used |
| * on the ioctl path, this can create a condition where the EEH handler becomes |
| * stuck, infinitely waiting for this ioctl thread. To avoid this behavior, |
| * temporarily unmark this thread as an ioctl thread by releasing the ioctl read |
| * semaphore. This will allow the EEH handler to proceed with a recovery while |
| * this thread is still running. Once the scsi_execute() returns, reacquire the |
| * ioctl read semaphore and check the adapter state in case it changed while |
| * inside of scsi_execute(). The state check will wait if the adapter is still |
| * being recovered or return a failure if the recovery failed. In the event that |
| * the adapter reset failed, simply return the failure as the ioctl would be |
| * unable to continue. |
| * |
| * Note that the above puts a requirement on this routine to only be called on |
| * an ioctl thread. |
| * |
| * Return: 0 on success, -errno on failure |
| */ |
| static int write_same16(struct scsi_device *sdev, |
| u64 lba, |
| u32 nblks) |
| { |
| u8 *cmd_buf = NULL; |
| u8 *scsi_cmd = NULL; |
| int rc = 0; |
| int result = 0; |
| u64 offset = lba; |
| int left = nblks; |
| struct cxlflash_cfg *cfg = shost_priv(sdev->host); |
| struct device *dev = &cfg->dev->dev; |
| const u32 s = ilog2(sdev->sector_size) - 9; |
| const u32 to = sdev->request_queue->rq_timeout; |
| const u32 ws_limit = blk_queue_get_max_sectors(sdev->request_queue, |
| REQ_OP_WRITE_SAME) >> s; |
| |
| cmd_buf = kzalloc(CMD_BUFSIZE, GFP_KERNEL); |
| scsi_cmd = kzalloc(MAX_COMMAND_SIZE, GFP_KERNEL); |
| if (unlikely(!cmd_buf || !scsi_cmd)) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| while (left > 0) { |
| |
| scsi_cmd[0] = WRITE_SAME_16; |
| scsi_cmd[1] = cfg->ws_unmap ? 0x8 : 0; |
| put_unaligned_be64(offset, &scsi_cmd[2]); |
| put_unaligned_be32(ws_limit < left ? ws_limit : left, |
| &scsi_cmd[10]); |
| |
| /* Drop the ioctl read semahpore across lengthy call */ |
| up_read(&cfg->ioctl_rwsem); |
| result = scsi_execute(sdev, scsi_cmd, DMA_TO_DEVICE, cmd_buf, |
| CMD_BUFSIZE, NULL, NULL, to, |
| CMD_RETRIES, 0, 0, NULL); |
| down_read(&cfg->ioctl_rwsem); |
| rc = check_state(cfg); |
| if (rc) { |
| dev_err(dev, "%s: Failed state result=%08x\n", |
| __func__, result); |
| rc = -ENODEV; |
| goto out; |
| } |
| |
| if (result) { |
| dev_err_ratelimited(dev, "%s: command failed for " |
| "offset=%lld result=%08x\n", |
| __func__, offset, result); |
| rc = -EIO; |
| goto out; |
| } |
| left -= ws_limit; |
| offset += ws_limit; |
| } |
| |
| out: |
| kfree(cmd_buf); |
| kfree(scsi_cmd); |
| dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc); |
| return rc; |
| } |
| |
| /** |
| * grow_lxt() - expands the translation table associated with the specified RHTE |
| * @afu: AFU associated with the host. |
| * @sdev: SCSI device associated with LUN. |
| * @ctxid: Context ID of context owning the RHTE. |
| * @rhndl: Resource handle associated with the RHTE. |
| * @rhte: Resource handle entry (RHTE). |
| * @new_size: Number of translation entries associated with RHTE. |
| * |
| * By design, this routine employs a 'best attempt' allocation and will |
| * truncate the requested size down if there is not sufficient space in |
| * the block allocator to satisfy the request but there does exist some |
| * amount of space. The user is made aware of this by returning the size |
| * allocated. |
| * |
| * Return: 0 on success, -errno on failure |
| */ |
| static int grow_lxt(struct afu *afu, |
| struct scsi_device *sdev, |
| ctx_hndl_t ctxid, |
| res_hndl_t rhndl, |
| struct sisl_rht_entry *rhte, |
| u64 *new_size) |
| { |
| struct cxlflash_cfg *cfg = shost_priv(sdev->host); |
| struct device *dev = &cfg->dev->dev; |
| struct sisl_lxt_entry *lxt = NULL, *lxt_old = NULL; |
| struct llun_info *lli = sdev->hostdata; |
| struct glun_info *gli = lli->parent; |
| struct blka *blka = &gli->blka; |
| u32 av_size; |
| u32 ngrps, ngrps_old; |
| u64 aun; /* chunk# allocated by block allocator */ |
| u64 delta = *new_size - rhte->lxt_cnt; |
| u64 my_new_size; |
| int i, rc = 0; |
| |
| /* |
| * Check what is available in the block allocator before re-allocating |
| * LXT array. This is done up front under the mutex which must not be |
| * released until after allocation is complete. |
| */ |
| mutex_lock(&blka->mutex); |
| av_size = ba_space(&blka->ba_lun); |
| if (unlikely(av_size <= 0)) { |
| dev_dbg(dev, "%s: ba_space error av_size=%d\n", |
| __func__, av_size); |
| mutex_unlock(&blka->mutex); |
| rc = -ENOSPC; |
| goto out; |
| } |
| |
| if (av_size < delta) |
| delta = av_size; |
| |
| lxt_old = rhte->lxt_start; |
| ngrps_old = LXT_NUM_GROUPS(rhte->lxt_cnt); |
| ngrps = LXT_NUM_GROUPS(rhte->lxt_cnt + delta); |
| |
| if (ngrps != ngrps_old) { |
| /* reallocate to fit new size */ |
| lxt = kzalloc((sizeof(*lxt) * LXT_GROUP_SIZE * ngrps), |
| GFP_KERNEL); |
| if (unlikely(!lxt)) { |
| mutex_unlock(&blka->mutex); |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| /* copy over all old entries */ |
| memcpy(lxt, lxt_old, (sizeof(*lxt) * rhte->lxt_cnt)); |
| } else |
| lxt = lxt_old; |
| |
| /* nothing can fail from now on */ |
| my_new_size = rhte->lxt_cnt + delta; |
| |
| /* add new entries to the end */ |
| for (i = rhte->lxt_cnt; i < my_new_size; i++) { |
| /* |
| * Due to the earlier check of available space, ba_alloc |
| * cannot fail here. If it did due to internal error, |
| * leave a rlba_base of -1u which will likely be a |
| * invalid LUN (too large). |
| */ |
| aun = ba_alloc(&blka->ba_lun); |
| if ((aun == -1ULL) || (aun >= blka->nchunk)) |
| dev_dbg(dev, "%s: ba_alloc error allocated chunk=%llu " |
| "max=%llu\n", __func__, aun, blka->nchunk - 1); |
| |
| /* select both ports, use r/w perms from RHT */ |
| lxt[i].rlba_base = ((aun << MC_CHUNK_SHIFT) | |
| (lli->lun_index << LXT_LUNIDX_SHIFT) | |
| (RHT_PERM_RW << LXT_PERM_SHIFT | |
| lli->port_sel)); |
| } |
| |
| mutex_unlock(&blka->mutex); |
| |
| /* |
| * The following sequence is prescribed in the SISlite spec |
| * for syncing up with the AFU when adding LXT entries. |
| */ |
| dma_wmb(); /* Make LXT updates are visible */ |
| |
| rhte->lxt_start = lxt; |
| dma_wmb(); /* Make RHT entry's LXT table update visible */ |
| |
| rhte->lxt_cnt = my_new_size; |
| dma_wmb(); /* Make RHT entry's LXT table size update visible */ |
| |
| rc = cxlflash_afu_sync(afu, ctxid, rhndl, AFU_LW_SYNC); |
| if (unlikely(rc)) |
| rc = -EAGAIN; |
| |
| /* free old lxt if reallocated */ |
| if (lxt != lxt_old) |
| kfree(lxt_old); |
| *new_size = my_new_size; |
| out: |
| dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc); |
| return rc; |
| } |
| |
| /** |
| * shrink_lxt() - reduces translation table associated with the specified RHTE |
| * @afu: AFU associated with the host. |
| * @sdev: SCSI device associated with LUN. |
| * @rhndl: Resource handle associated with the RHTE. |
| * @rhte: Resource handle entry (RHTE). |
| * @ctxi: Context owning resources. |
| * @new_size: Number of translation entries associated with RHTE. |
| * |
| * Return: 0 on success, -errno on failure |
| */ |
| static int shrink_lxt(struct afu *afu, |
| struct scsi_device *sdev, |
| res_hndl_t rhndl, |
| struct sisl_rht_entry *rhte, |
| struct ctx_info *ctxi, |
| u64 *new_size) |
| { |
| struct cxlflash_cfg *cfg = shost_priv(sdev->host); |
| struct device *dev = &cfg->dev->dev; |
| struct sisl_lxt_entry *lxt, *lxt_old; |
| struct llun_info *lli = sdev->hostdata; |
| struct glun_info *gli = lli->parent; |
| struct blka *blka = &gli->blka; |
| ctx_hndl_t ctxid = DECODE_CTXID(ctxi->ctxid); |
| bool needs_ws = ctxi->rht_needs_ws[rhndl]; |
| bool needs_sync = !ctxi->err_recovery_active; |
| u32 ngrps, ngrps_old; |
| u64 aun; /* chunk# allocated by block allocator */ |
| u64 delta = rhte->lxt_cnt - *new_size; |
| u64 my_new_size; |
| int i, rc = 0; |
| |
| lxt_old = rhte->lxt_start; |
| ngrps_old = LXT_NUM_GROUPS(rhte->lxt_cnt); |
| ngrps = LXT_NUM_GROUPS(rhte->lxt_cnt - delta); |
| |
| if (ngrps != ngrps_old) { |
| /* Reallocate to fit new size unless new size is 0 */ |
| if (ngrps) { |
| lxt = kzalloc((sizeof(*lxt) * LXT_GROUP_SIZE * ngrps), |
| GFP_KERNEL); |
| if (unlikely(!lxt)) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| /* Copy over old entries that will remain */ |
| memcpy(lxt, lxt_old, |
| (sizeof(*lxt) * (rhte->lxt_cnt - delta))); |
| } else |
| lxt = NULL; |
| } else |
| lxt = lxt_old; |
| |
| /* Nothing can fail from now on */ |
| my_new_size = rhte->lxt_cnt - delta; |
| |
| /* |
| * The following sequence is prescribed in the SISlite spec |
| * for syncing up with the AFU when removing LXT entries. |
| */ |
| rhte->lxt_cnt = my_new_size; |
| dma_wmb(); /* Make RHT entry's LXT table size update visible */ |
| |
| rhte->lxt_start = lxt; |
| dma_wmb(); /* Make RHT entry's LXT table update visible */ |
| |
| if (needs_sync) { |
| rc = cxlflash_afu_sync(afu, ctxid, rhndl, AFU_HW_SYNC); |
| if (unlikely(rc)) |
| rc = -EAGAIN; |
| } |
| |
| if (needs_ws) { |
| /* |
| * Mark the context as unavailable, so that we can release |
| * the mutex safely. |
| */ |
| ctxi->unavail = true; |
| mutex_unlock(&ctxi->mutex); |
| } |
| |
| /* Free LBAs allocated to freed chunks */ |
| mutex_lock(&blka->mutex); |
| for (i = delta - 1; i >= 0; i--) { |
| aun = lxt_old[my_new_size + i].rlba_base >> MC_CHUNK_SHIFT; |
| if (needs_ws) |
| write_same16(sdev, aun, MC_CHUNK_SIZE); |
| ba_free(&blka->ba_lun, aun); |
| } |
| mutex_unlock(&blka->mutex); |
| |
| if (needs_ws) { |
| /* Make the context visible again */ |
| mutex_lock(&ctxi->mutex); |
| ctxi->unavail = false; |
| } |
| |
| /* Free old lxt if reallocated */ |
| if (lxt != lxt_old) |
| kfree(lxt_old); |
| *new_size = my_new_size; |
| out: |
| dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc); |
| return rc; |
| } |
| |
| /** |
| * _cxlflash_vlun_resize() - changes the size of a virtual LUN |
| * @sdev: SCSI device associated with LUN owning virtual LUN. |
| * @ctxi: Context owning resources. |
| * @resize: Resize ioctl data structure. |
| * |
| * On successful return, the user is informed of the new size (in blocks) |
| * of the virtual LUN in last LBA format. When the size of the virtual |
| * LUN is zero, the last LBA is reflected as -1. See comment in the |
| * prologue for _cxlflash_disk_release() regarding AFU syncs and contexts |
| * on the error recovery list. |
| * |
| * Return: 0 on success, -errno on failure |
| */ |
| int _cxlflash_vlun_resize(struct scsi_device *sdev, |
| struct ctx_info *ctxi, |
| struct dk_cxlflash_resize *resize) |
| { |
| struct cxlflash_cfg *cfg = shost_priv(sdev->host); |
| struct device *dev = &cfg->dev->dev; |
| struct llun_info *lli = sdev->hostdata; |
| struct glun_info *gli = lli->parent; |
| struct afu *afu = cfg->afu; |
| bool put_ctx = false; |
| |
| res_hndl_t rhndl = resize->rsrc_handle; |
| u64 new_size; |
| u64 nsectors; |
| u64 ctxid = DECODE_CTXID(resize->context_id), |
| rctxid = resize->context_id; |
| |
| struct sisl_rht_entry *rhte; |
| |
| int rc = 0; |
| |
| /* |
| * The requested size (req_size) is always assumed to be in 4k blocks, |
| * so we have to convert it here from 4k to chunk size. |
| */ |
| nsectors = (resize->req_size * CXLFLASH_BLOCK_SIZE) / gli->blk_len; |
| new_size = DIV_ROUND_UP(nsectors, MC_CHUNK_SIZE); |
| |
| dev_dbg(dev, "%s: ctxid=%llu rhndl=%llu req_size=%llu new_size=%llu\n", |
| __func__, ctxid, resize->rsrc_handle, resize->req_size, |
| new_size); |
| |
| if (unlikely(gli->mode != MODE_VIRTUAL)) { |
| dev_dbg(dev, "%s: LUN mode does not support resize mode=%d\n", |
| __func__, gli->mode); |
| rc = -EINVAL; |
| goto out; |
| |
| } |
| |
| if (!ctxi) { |
| ctxi = get_context(cfg, rctxid, lli, CTX_CTRL_ERR_FALLBACK); |
| if (unlikely(!ctxi)) { |
| dev_dbg(dev, "%s: Bad context ctxid=%llu\n", |
| __func__, ctxid); |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| put_ctx = true; |
| } |
| |
| rhte = get_rhte(ctxi, rhndl, lli); |
| if (unlikely(!rhte)) { |
| dev_dbg(dev, "%s: Bad resource handle rhndl=%u\n", |
| __func__, rhndl); |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| if (new_size > rhte->lxt_cnt) |
| rc = grow_lxt(afu, sdev, ctxid, rhndl, rhte, &new_size); |
| else if (new_size < rhte->lxt_cnt) |
| rc = shrink_lxt(afu, sdev, rhndl, rhte, ctxi, &new_size); |
| else { |
| /* |
| * Rare case where there is already sufficient space, just |
| * need to perform a translation sync with the AFU. This |
| * scenario likely follows a previous sync failure during |
| * a resize operation. Accordingly, perform the heavyweight |
| * form of translation sync as it is unknown which type of |
| * resize failed previously. |
| */ |
| rc = cxlflash_afu_sync(afu, ctxid, rhndl, AFU_HW_SYNC); |
| if (unlikely(rc)) { |
| rc = -EAGAIN; |
| goto out; |
| } |
| } |
| |
| resize->hdr.return_flags = 0; |
| resize->last_lba = (new_size * MC_CHUNK_SIZE * gli->blk_len); |
| resize->last_lba /= CXLFLASH_BLOCK_SIZE; |
| resize->last_lba--; |
| |
| out: |
| if (put_ctx) |
| put_context(ctxi); |
| dev_dbg(dev, "%s: resized to %llu returning rc=%d\n", |
| __func__, resize->last_lba, rc); |
| return rc; |
| } |
| |
| int cxlflash_vlun_resize(struct scsi_device *sdev, |
| struct dk_cxlflash_resize *resize) |
| { |
| return _cxlflash_vlun_resize(sdev, NULL, resize); |
| } |
| |
| /** |
| * cxlflash_restore_luntable() - Restore LUN table to prior state |
| * @cfg: Internal structure associated with the host. |
| */ |
| void cxlflash_restore_luntable(struct cxlflash_cfg *cfg) |
| { |
| struct llun_info *lli, *temp; |
| u32 lind; |
| int k; |
| struct device *dev = &cfg->dev->dev; |
| __be64 __iomem *fc_port_luns; |
| |
| mutex_lock(&global.mutex); |
| |
| list_for_each_entry_safe(lli, temp, &cfg->lluns, list) { |
| if (!lli->in_table) |
| continue; |
| |
| lind = lli->lun_index; |
| dev_dbg(dev, "%s: Virtual LUNs on slot %d:\n", __func__, lind); |
| |
| for (k = 0; k < cfg->num_fc_ports; k++) |
| if (lli->port_sel & (1 << k)) { |
| fc_port_luns = get_fc_port_luns(cfg, k); |
| writeq_be(lli->lun_id[k], &fc_port_luns[lind]); |
| dev_dbg(dev, "\t%d=%llx\n", k, lli->lun_id[k]); |
| } |
| } |
| |
| mutex_unlock(&global.mutex); |
| } |
| |
| /** |
| * get_num_ports() - compute number of ports from port selection mask |
| * @psm: Port selection mask. |
| * |
| * Return: Population count of port selection mask |
| */ |
| static inline u8 get_num_ports(u32 psm) |
| { |
| static const u8 bits[16] = { 0, 1, 1, 2, 1, 2, 2, 3, |
| 1, 2, 2, 3, 2, 3, 3, 4 }; |
| |
| return bits[psm & 0xf]; |
| } |
| |
| /** |
| * init_luntable() - write an entry in the LUN table |
| * @cfg: Internal structure associated with the host. |
| * @lli: Per adapter LUN information structure. |
| * |
| * On successful return, a LUN table entry is created: |
| * - at the top for LUNs visible on multiple ports. |
| * - at the bottom for LUNs visible only on one port. |
| * |
| * Return: 0 on success, -errno on failure |
| */ |
| static int init_luntable(struct cxlflash_cfg *cfg, struct llun_info *lli) |
| { |
| u32 chan; |
| u32 lind; |
| u32 nports; |
| int rc = 0; |
| int k; |
| struct device *dev = &cfg->dev->dev; |
| __be64 __iomem *fc_port_luns; |
| |
| mutex_lock(&global.mutex); |
| |
| if (lli->in_table) |
| goto out; |
| |
| nports = get_num_ports(lli->port_sel); |
| if (nports == 0 || nports > cfg->num_fc_ports) { |
| WARN(1, "Unsupported port configuration nports=%u", nports); |
| rc = -EIO; |
| goto out; |
| } |
| |
| if (nports > 1) { |
| /* |
| * When LUN is visible from multiple ports, we will put |
| * it in the top half of the LUN table. |
| */ |
| for (k = 0; k < cfg->num_fc_ports; k++) { |
| if (!(lli->port_sel & (1 << k))) |
| continue; |
| |
| if (cfg->promote_lun_index == cfg->last_lun_index[k]) { |
| rc = -ENOSPC; |
| goto out; |
| } |
| } |
| |
| lind = lli->lun_index = cfg->promote_lun_index; |
| dev_dbg(dev, "%s: Virtual LUNs on slot %d:\n", __func__, lind); |
| |
| for (k = 0; k < cfg->num_fc_ports; k++) { |
| if (!(lli->port_sel & (1 << k))) |
| continue; |
| |
| fc_port_luns = get_fc_port_luns(cfg, k); |
| writeq_be(lli->lun_id[k], &fc_port_luns[lind]); |
| dev_dbg(dev, "\t%d=%llx\n", k, lli->lun_id[k]); |
| } |
| |
| cfg->promote_lun_index++; |
| } else { |
| /* |
| * When LUN is visible only from one port, we will put |
| * it in the bottom half of the LUN table. |
| */ |
| chan = PORTMASK2CHAN(lli->port_sel); |
| if (cfg->promote_lun_index == cfg->last_lun_index[chan]) { |
| rc = -ENOSPC; |
| goto out; |
| } |
| |
| lind = lli->lun_index = cfg->last_lun_index[chan]; |
| fc_port_luns = get_fc_port_luns(cfg, chan); |
| writeq_be(lli->lun_id[chan], &fc_port_luns[lind]); |
| cfg->last_lun_index[chan]--; |
| dev_dbg(dev, "%s: Virtual LUNs on slot %d:\n\t%d=%llx\n", |
| __func__, lind, chan, lli->lun_id[chan]); |
| } |
| |
| lli->in_table = true; |
| out: |
| mutex_unlock(&global.mutex); |
| dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc); |
| return rc; |
| } |
| |
| /** |
| * cxlflash_disk_virtual_open() - open a virtual disk of specified size |
| * @sdev: SCSI device associated with LUN owning virtual LUN. |
| * @arg: UVirtual ioctl data structure. |
| * |
| * On successful return, the user is informed of the resource handle |
| * to be used to identify the virtual LUN and the size (in blocks) of |
| * the virtual LUN in last LBA format. When the size of the virtual LUN |
| * is zero, the last LBA is reflected as -1. |
| * |
| * Return: 0 on success, -errno on failure |
| */ |
| int cxlflash_disk_virtual_open(struct scsi_device *sdev, void *arg) |
| { |
| struct cxlflash_cfg *cfg = shost_priv(sdev->host); |
| struct device *dev = &cfg->dev->dev; |
| struct llun_info *lli = sdev->hostdata; |
| struct glun_info *gli = lli->parent; |
| |
| struct dk_cxlflash_uvirtual *virt = (struct dk_cxlflash_uvirtual *)arg; |
| struct dk_cxlflash_resize resize; |
| |
| u64 ctxid = DECODE_CTXID(virt->context_id), |
| rctxid = virt->context_id; |
| u64 lun_size = virt->lun_size; |
| u64 last_lba = 0; |
| u64 rsrc_handle = -1; |
| |
| int rc = 0; |
| |
| struct ctx_info *ctxi = NULL; |
| struct sisl_rht_entry *rhte = NULL; |
| |
| dev_dbg(dev, "%s: ctxid=%llu ls=%llu\n", __func__, ctxid, lun_size); |
| |
| /* Setup the LUNs block allocator on first call */ |
| mutex_lock(&gli->mutex); |
| if (gli->mode == MODE_NONE) { |
| rc = init_vlun(lli); |
| if (rc) { |
| dev_err(dev, "%s: init_vlun failed rc=%d\n", |
| __func__, rc); |
| rc = -ENOMEM; |
| goto err0; |
| } |
| } |
| |
| rc = cxlflash_lun_attach(gli, MODE_VIRTUAL, true); |
| if (unlikely(rc)) { |
| dev_err(dev, "%s: Failed attach to LUN (VIRTUAL)\n", __func__); |
| goto err0; |
| } |
| mutex_unlock(&gli->mutex); |
| |
| rc = init_luntable(cfg, lli); |
| if (rc) { |
| dev_err(dev, "%s: init_luntable failed rc=%d\n", __func__, rc); |
| goto err1; |
| } |
| |
| ctxi = get_context(cfg, rctxid, lli, 0); |
| if (unlikely(!ctxi)) { |
| dev_err(dev, "%s: Bad context ctxid=%llu\n", __func__, ctxid); |
| rc = -EINVAL; |
| goto err1; |
| } |
| |
| rhte = rhte_checkout(ctxi, lli); |
| if (unlikely(!rhte)) { |
| dev_err(dev, "%s: too many opens ctxid=%llu\n", |
| __func__, ctxid); |
| rc = -EMFILE; /* too many opens */ |
| goto err1; |
| } |
| |
| rsrc_handle = (rhte - ctxi->rht_start); |
| |
| /* Populate RHT format 0 */ |
| rhte->nmask = MC_RHT_NMASK; |
| rhte->fp = SISL_RHT_FP(0U, ctxi->rht_perms); |
| |
| /* Resize even if requested size is 0 */ |
| marshal_virt_to_resize(virt, &resize); |
| resize.rsrc_handle = rsrc_handle; |
| rc = _cxlflash_vlun_resize(sdev, ctxi, &resize); |
| if (rc) { |
| dev_err(dev, "%s: resize failed rc=%d\n", __func__, rc); |
| goto err2; |
| } |
| last_lba = resize.last_lba; |
| |
| if (virt->hdr.flags & DK_CXLFLASH_UVIRTUAL_NEED_WRITE_SAME) |
| ctxi->rht_needs_ws[rsrc_handle] = true; |
| |
| virt->hdr.return_flags = 0; |
| virt->last_lba = last_lba; |
| virt->rsrc_handle = rsrc_handle; |
| |
| if (get_num_ports(lli->port_sel) > 1) |
| virt->hdr.return_flags |= DK_CXLFLASH_ALL_PORTS_ACTIVE; |
| out: |
| if (likely(ctxi)) |
| put_context(ctxi); |
| dev_dbg(dev, "%s: returning handle=%llu rc=%d llba=%llu\n", |
| __func__, rsrc_handle, rc, last_lba); |
| return rc; |
| |
| err2: |
| rhte_checkin(ctxi, rhte); |
| err1: |
| cxlflash_lun_detach(gli); |
| goto out; |
| err0: |
| /* Special common cleanup prior to successful LUN attach */ |
| cxlflash_ba_terminate(&gli->blka.ba_lun); |
| mutex_unlock(&gli->mutex); |
| goto out; |
| } |
| |
| /** |
| * clone_lxt() - copies translation tables from source to destination RHTE |
| * @afu: AFU associated with the host. |
| * @blka: Block allocator associated with LUN. |
| * @ctxid: Context ID of context owning the RHTE. |
| * @rhndl: Resource handle associated with the RHTE. |
| * @rhte: Destination resource handle entry (RHTE). |
| * @rhte_src: Source resource handle entry (RHTE). |
| * |
| * Return: 0 on success, -errno on failure |
| */ |
| static int clone_lxt(struct afu *afu, |
| struct blka *blka, |
| ctx_hndl_t ctxid, |
| res_hndl_t rhndl, |
| struct sisl_rht_entry *rhte, |
| struct sisl_rht_entry *rhte_src) |
| { |
| struct cxlflash_cfg *cfg = afu->parent; |
| struct device *dev = &cfg->dev->dev; |
| struct sisl_lxt_entry *lxt = NULL; |
| bool locked = false; |
| u32 ngrps; |
| u64 aun; /* chunk# allocated by block allocator */ |
| int j; |
| int i = 0; |
| int rc = 0; |
| |
| ngrps = LXT_NUM_GROUPS(rhte_src->lxt_cnt); |
| |
| if (ngrps) { |
| /* allocate new LXTs for clone */ |
| lxt = kzalloc((sizeof(*lxt) * LXT_GROUP_SIZE * ngrps), |
| GFP_KERNEL); |
| if (unlikely(!lxt)) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| /* copy over */ |
| memcpy(lxt, rhte_src->lxt_start, |
| (sizeof(*lxt) * rhte_src->lxt_cnt)); |
| |
| /* clone the LBAs in block allocator via ref_cnt, note that the |
| * block allocator mutex must be held until it is established |
| * that this routine will complete without the need for a |
| * cleanup. |
| */ |
| mutex_lock(&blka->mutex); |
| locked = true; |
| for (i = 0; i < rhte_src->lxt_cnt; i++) { |
| aun = (lxt[i].rlba_base >> MC_CHUNK_SHIFT); |
| if (ba_clone(&blka->ba_lun, aun) == -1ULL) { |
| rc = -EIO; |
| goto err; |
| } |
| } |
| } |
| |
| /* |
| * The following sequence is prescribed in the SISlite spec |
| * for syncing up with the AFU when adding LXT entries. |
| */ |
| dma_wmb(); /* Make LXT updates are visible */ |
| |
| rhte->lxt_start = lxt; |
| dma_wmb(); /* Make RHT entry's LXT table update visible */ |
| |
| rhte->lxt_cnt = rhte_src->lxt_cnt; |
| dma_wmb(); /* Make RHT entry's LXT table size update visible */ |
| |
| rc = cxlflash_afu_sync(afu, ctxid, rhndl, AFU_LW_SYNC); |
| if (unlikely(rc)) { |
| rc = -EAGAIN; |
| goto err2; |
| } |
| |
| out: |
| if (locked) |
| mutex_unlock(&blka->mutex); |
| dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc); |
| return rc; |
| err2: |
| /* Reset the RHTE */ |
| rhte->lxt_cnt = 0; |
| dma_wmb(); |
| rhte->lxt_start = NULL; |
| dma_wmb(); |
| err: |
| /* free the clones already made */ |
| for (j = 0; j < i; j++) { |
| aun = (lxt[j].rlba_base >> MC_CHUNK_SHIFT); |
| ba_free(&blka->ba_lun, aun); |
| } |
| kfree(lxt); |
| goto out; |
| } |
| |
| /** |
| * cxlflash_disk_clone() - clone a context by making snapshot of another |
| * @sdev: SCSI device associated with LUN owning virtual LUN. |
| * @clone: Clone ioctl data structure. |
| * |
| * This routine effectively performs cxlflash_disk_open operation for each |
| * in-use virtual resource in the source context. Note that the destination |
| * context must be in pristine state and cannot have any resource handles |
| * open at the time of the clone. |
| * |
| * Return: 0 on success, -errno on failure |
| */ |
| int cxlflash_disk_clone(struct scsi_device *sdev, |
| struct dk_cxlflash_clone *clone) |
| { |
| struct cxlflash_cfg *cfg = shost_priv(sdev->host); |
| struct device *dev = &cfg->dev->dev; |
| struct llun_info *lli = sdev->hostdata; |
| struct glun_info *gli = lli->parent; |
| struct blka *blka = &gli->blka; |
| struct afu *afu = cfg->afu; |
| struct dk_cxlflash_release release = { { 0 }, 0 }; |
| |
| struct ctx_info *ctxi_src = NULL, |
| *ctxi_dst = NULL; |
| struct lun_access *lun_access_src, *lun_access_dst; |
| u32 perms; |
| u64 ctxid_src = DECODE_CTXID(clone->context_id_src), |
| ctxid_dst = DECODE_CTXID(clone->context_id_dst), |
| rctxid_src = clone->context_id_src, |
| rctxid_dst = clone->context_id_dst; |
| int i, j; |
| int rc = 0; |
| bool found; |
| LIST_HEAD(sidecar); |
| |
| dev_dbg(dev, "%s: ctxid_src=%llu ctxid_dst=%llu\n", |
| __func__, ctxid_src, ctxid_dst); |
| |
| /* Do not clone yourself */ |
| if (unlikely(rctxid_src == rctxid_dst)) { |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| if (unlikely(gli->mode != MODE_VIRTUAL)) { |
| rc = -EINVAL; |
| dev_dbg(dev, "%s: Only supported on virtual LUNs mode=%u\n", |
| __func__, gli->mode); |
| goto out; |
| } |
| |
| ctxi_src = get_context(cfg, rctxid_src, lli, CTX_CTRL_CLONE); |
| ctxi_dst = get_context(cfg, rctxid_dst, lli, 0); |
| if (unlikely(!ctxi_src || !ctxi_dst)) { |
| dev_dbg(dev, "%s: Bad context ctxid_src=%llu ctxid_dst=%llu\n", |
| __func__, ctxid_src, ctxid_dst); |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| /* Verify there is no open resource handle in the destination context */ |
| for (i = 0; i < MAX_RHT_PER_CONTEXT; i++) |
| if (ctxi_dst->rht_start[i].nmask != 0) { |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| /* Clone LUN access list */ |
| list_for_each_entry(lun_access_src, &ctxi_src->luns, list) { |
| found = false; |
| list_for_each_entry(lun_access_dst, &ctxi_dst->luns, list) |
| if (lun_access_dst->sdev == lun_access_src->sdev) { |
| found = true; |
| break; |
| } |
| |
| if (!found) { |
| lun_access_dst = kzalloc(sizeof(*lun_access_dst), |
| GFP_KERNEL); |
| if (unlikely(!lun_access_dst)) { |
| dev_err(dev, "%s: lun_access allocation fail\n", |
| __func__); |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| *lun_access_dst = *lun_access_src; |
| list_add(&lun_access_dst->list, &sidecar); |
| } |
| } |
| |
| if (unlikely(!ctxi_src->rht_out)) { |
| dev_dbg(dev, "%s: Nothing to clone\n", __func__); |
| goto out_success; |
| } |
| |
| /* User specified permission on attach */ |
| perms = ctxi_dst->rht_perms; |
| |
| /* |
| * Copy over checked-out RHT (and their associated LXT) entries by |
| * hand, stopping after we've copied all outstanding entries and |
| * cleaning up if the clone fails. |
| * |
| * Note: This loop is equivalent to performing cxlflash_disk_open and |
| * cxlflash_vlun_resize. As such, LUN accounting needs to be taken into |
| * account by attaching after each successful RHT entry clone. In the |
| * event that a clone failure is experienced, the LUN detach is handled |
| * via the cleanup performed by _cxlflash_disk_release. |
| */ |
| for (i = 0; i < MAX_RHT_PER_CONTEXT; i++) { |
| if (ctxi_src->rht_out == ctxi_dst->rht_out) |
| break; |
| if (ctxi_src->rht_start[i].nmask == 0) |
| continue; |
| |
| /* Consume a destination RHT entry */ |
| ctxi_dst->rht_out++; |
| ctxi_dst->rht_start[i].nmask = ctxi_src->rht_start[i].nmask; |
| ctxi_dst->rht_start[i].fp = |
| SISL_RHT_FP_CLONE(ctxi_src->rht_start[i].fp, perms); |
| ctxi_dst->rht_lun[i] = ctxi_src->rht_lun[i]; |
| |
| rc = clone_lxt(afu, blka, ctxid_dst, i, |
| &ctxi_dst->rht_start[i], |
| &ctxi_src->rht_start[i]); |
| if (rc) { |
| marshal_clone_to_rele(clone, &release); |
| for (j = 0; j < i; j++) { |
| release.rsrc_handle = j; |
| _cxlflash_disk_release(sdev, ctxi_dst, |
| &release); |
| } |
| |
| /* Put back the one we failed on */ |
| rhte_checkin(ctxi_dst, &ctxi_dst->rht_start[i]); |
| goto err; |
| } |
| |
| cxlflash_lun_attach(gli, gli->mode, false); |
| } |
| |
| out_success: |
| list_splice(&sidecar, &ctxi_dst->luns); |
| |
| /* fall through */ |
| out: |
| if (ctxi_src) |
| put_context(ctxi_src); |
| if (ctxi_dst) |
| put_context(ctxi_dst); |
| dev_dbg(dev, "%s: returning rc=%d\n", __func__, rc); |
| return rc; |
| |
| err: |
| list_for_each_entry_safe(lun_access_src, lun_access_dst, &sidecar, list) |
| kfree(lun_access_src); |
| goto out; |
| } |