| /* |
| * Copyright © 2006-2007 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| */ |
| |
| #include <linux/dma-resv.h> |
| #include <linux/i2c.h> |
| #include <linux/input.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/string_helpers.h> |
| |
| #include <drm/display/drm_dp_helper.h> |
| #include <drm/display/drm_dp_tunnel.h> |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_atomic_uapi.h> |
| #include <drm/drm_damage_helper.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_rect.h> |
| |
| #include "gem/i915_gem_lmem.h" |
| #include "gem/i915_gem_object.h" |
| |
| #include "g4x_dp.h" |
| #include "g4x_hdmi.h" |
| #include "hsw_ips.h" |
| #include "i915_config.h" |
| #include "i915_drv.h" |
| #include "i915_reg.h" |
| #include "i915_utils.h" |
| #include "i9xx_plane.h" |
| #include "i9xx_plane_regs.h" |
| #include "i9xx_wm.h" |
| #include "intel_atomic.h" |
| #include "intel_atomic_plane.h" |
| #include "intel_audio.h" |
| #include "intel_bw.h" |
| #include "intel_cdclk.h" |
| #include "intel_clock_gating.h" |
| #include "intel_color.h" |
| #include "intel_crt.h" |
| #include "intel_crtc.h" |
| #include "intel_crtc_state_dump.h" |
| #include "intel_cursor_regs.h" |
| #include "intel_cx0_phy.h" |
| #include "intel_cursor.h" |
| #include "intel_ddi.h" |
| #include "intel_de.h" |
| #include "intel_display_driver.h" |
| #include "intel_display_power.h" |
| #include "intel_display_types.h" |
| #include "intel_dmc.h" |
| #include "intel_dp.h" |
| #include "intel_dp_link_training.h" |
| #include "intel_dp_mst.h" |
| #include "intel_dp_tunnel.h" |
| #include "intel_dpll.h" |
| #include "intel_dpll_mgr.h" |
| #include "intel_dpt.h" |
| #include "intel_dpt_common.h" |
| #include "intel_drrs.h" |
| #include "intel_dsb.h" |
| #include "intel_dsi.h" |
| #include "intel_dvo.h" |
| #include "intel_fb.h" |
| #include "intel_fbc.h" |
| #include "intel_fdi.h" |
| #include "intel_fifo_underrun.h" |
| #include "intel_frontbuffer.h" |
| #include "intel_hdmi.h" |
| #include "intel_hotplug.h" |
| #include "intel_link_bw.h" |
| #include "intel_lvds.h" |
| #include "intel_lvds_regs.h" |
| #include "intel_modeset_setup.h" |
| #include "intel_modeset_verify.h" |
| #include "intel_overlay.h" |
| #include "intel_panel.h" |
| #include "intel_pch_display.h" |
| #include "intel_pch_refclk.h" |
| #include "intel_pcode.h" |
| #include "intel_pipe_crc.h" |
| #include "intel_plane_initial.h" |
| #include "intel_pmdemand.h" |
| #include "intel_pps.h" |
| #include "intel_psr.h" |
| #include "intel_psr_regs.h" |
| #include "intel_sdvo.h" |
| #include "intel_snps_phy.h" |
| #include "intel_tc.h" |
| #include "intel_tdf.h" |
| #include "intel_tv.h" |
| #include "intel_vblank.h" |
| #include "intel_vdsc.h" |
| #include "intel_vdsc_regs.h" |
| #include "intel_vga.h" |
| #include "intel_vrr.h" |
| #include "intel_wm.h" |
| #include "skl_scaler.h" |
| #include "skl_universal_plane.h" |
| #include "skl_universal_plane_regs.h" |
| #include "skl_watermark.h" |
| #include "vlv_dpio_phy_regs.h" |
| #include "vlv_dsi.h" |
| #include "vlv_dsi_pll.h" |
| #include "vlv_dsi_regs.h" |
| #include "vlv_sideband.h" |
| |
| static void intel_set_transcoder_timings(const struct intel_crtc_state *crtc_state); |
| static void intel_set_pipe_src_size(const struct intel_crtc_state *crtc_state); |
| static void hsw_set_transconf(const struct intel_crtc_state *crtc_state); |
| static void bdw_set_pipe_misc(const struct intel_crtc_state *crtc_state); |
| |
| /* returns HPLL frequency in kHz */ |
| int vlv_get_hpll_vco(struct drm_i915_private *dev_priv) |
| { |
| int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 }; |
| |
| /* Obtain SKU information */ |
| hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) & |
| CCK_FUSE_HPLL_FREQ_MASK; |
| |
| return vco_freq[hpll_freq] * 1000; |
| } |
| |
| int vlv_get_cck_clock(struct drm_i915_private *dev_priv, |
| const char *name, u32 reg, int ref_freq) |
| { |
| u32 val; |
| int divider; |
| |
| val = vlv_cck_read(dev_priv, reg); |
| divider = val & CCK_FREQUENCY_VALUES; |
| |
| drm_WARN(&dev_priv->drm, (val & CCK_FREQUENCY_STATUS) != |
| (divider << CCK_FREQUENCY_STATUS_SHIFT), |
| "%s change in progress\n", name); |
| |
| return DIV_ROUND_CLOSEST(ref_freq << 1, divider + 1); |
| } |
| |
| int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv, |
| const char *name, u32 reg) |
| { |
| int hpll; |
| |
| vlv_cck_get(dev_priv); |
| |
| if (dev_priv->hpll_freq == 0) |
| dev_priv->hpll_freq = vlv_get_hpll_vco(dev_priv); |
| |
| hpll = vlv_get_cck_clock(dev_priv, name, reg, dev_priv->hpll_freq); |
| |
| vlv_cck_put(dev_priv); |
| |
| return hpll; |
| } |
| |
| void intel_update_czclk(struct drm_i915_private *dev_priv) |
| { |
| if (!(IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))) |
| return; |
| |
| dev_priv->czclk_freq = vlv_get_cck_clock_hpll(dev_priv, "czclk", |
| CCK_CZ_CLOCK_CONTROL); |
| |
| drm_dbg(&dev_priv->drm, "CZ clock rate: %d kHz\n", |
| dev_priv->czclk_freq); |
| } |
| |
| static bool is_hdr_mode(const struct intel_crtc_state *crtc_state) |
| { |
| return (crtc_state->active_planes & |
| ~(icl_hdr_plane_mask() | BIT(PLANE_CURSOR))) == 0; |
| } |
| |
| /* WA Display #0827: Gen9:all */ |
| static void |
| skl_wa_827(struct drm_i915_private *dev_priv, enum pipe pipe, bool enable) |
| { |
| intel_de_rmw(dev_priv, CLKGATE_DIS_PSL(pipe), |
| DUPS1_GATING_DIS | DUPS2_GATING_DIS, |
| enable ? DUPS1_GATING_DIS | DUPS2_GATING_DIS : 0); |
| } |
| |
| /* Wa_2006604312:icl,ehl */ |
| static void |
| icl_wa_scalerclkgating(struct drm_i915_private *dev_priv, enum pipe pipe, |
| bool enable) |
| { |
| intel_de_rmw(dev_priv, CLKGATE_DIS_PSL(pipe), |
| DPFR_GATING_DIS, |
| enable ? DPFR_GATING_DIS : 0); |
| } |
| |
| /* Wa_1604331009:icl,jsl,ehl */ |
| static void |
| icl_wa_cursorclkgating(struct drm_i915_private *dev_priv, enum pipe pipe, |
| bool enable) |
| { |
| intel_de_rmw(dev_priv, CLKGATE_DIS_PSL(pipe), |
| CURSOR_GATING_DIS, |
| enable ? CURSOR_GATING_DIS : 0); |
| } |
| |
| static bool |
| is_trans_port_sync_slave(const struct intel_crtc_state *crtc_state) |
| { |
| return crtc_state->master_transcoder != INVALID_TRANSCODER; |
| } |
| |
| bool |
| is_trans_port_sync_master(const struct intel_crtc_state *crtc_state) |
| { |
| return crtc_state->sync_mode_slaves_mask != 0; |
| } |
| |
| bool |
| is_trans_port_sync_mode(const struct intel_crtc_state *crtc_state) |
| { |
| return is_trans_port_sync_master(crtc_state) || |
| is_trans_port_sync_slave(crtc_state); |
| } |
| |
| static enum pipe joiner_primary_pipe(const struct intel_crtc_state *crtc_state) |
| { |
| return ffs(crtc_state->joiner_pipes) - 1; |
| } |
| |
| u8 intel_crtc_joiner_secondary_pipes(const struct intel_crtc_state *crtc_state) |
| { |
| if (crtc_state->joiner_pipes) |
| return crtc_state->joiner_pipes & ~BIT(joiner_primary_pipe(crtc_state)); |
| else |
| return 0; |
| } |
| |
| bool intel_crtc_is_joiner_secondary(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| |
| return crtc_state->joiner_pipes && |
| crtc->pipe != joiner_primary_pipe(crtc_state); |
| } |
| |
| bool intel_crtc_is_joiner_primary(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| |
| return crtc_state->joiner_pipes && |
| crtc->pipe == joiner_primary_pipe(crtc_state); |
| } |
| |
| static int intel_joiner_num_pipes(const struct intel_crtc_state *crtc_state) |
| { |
| return hweight8(crtc_state->joiner_pipes); |
| } |
| |
| u8 intel_crtc_joined_pipe_mask(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| |
| return BIT(crtc->pipe) | crtc_state->joiner_pipes; |
| } |
| |
| struct intel_crtc *intel_primary_crtc(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| |
| if (intel_crtc_is_joiner_secondary(crtc_state)) |
| return intel_crtc_for_pipe(i915, joiner_primary_pipe(crtc_state)); |
| else |
| return to_intel_crtc(crtc_state->uapi.crtc); |
| } |
| |
| static void |
| intel_wait_for_pipe_off(const struct intel_crtc_state *old_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (DISPLAY_VER(dev_priv) >= 4) { |
| enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder; |
| |
| /* Wait for the Pipe State to go off */ |
| if (intel_de_wait_for_clear(dev_priv, TRANSCONF(dev_priv, cpu_transcoder), |
| TRANSCONF_STATE_ENABLE, 100)) |
| drm_WARN(&dev_priv->drm, 1, "pipe_off wait timed out\n"); |
| } else { |
| intel_wait_for_pipe_scanline_stopped(crtc); |
| } |
| } |
| |
| void assert_transcoder(struct drm_i915_private *dev_priv, |
| enum transcoder cpu_transcoder, bool state) |
| { |
| bool cur_state; |
| enum intel_display_power_domain power_domain; |
| intel_wakeref_t wakeref; |
| |
| /* we keep both pipes enabled on 830 */ |
| if (IS_I830(dev_priv)) |
| state = true; |
| |
| power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder); |
| wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain); |
| if (wakeref) { |
| u32 val = intel_de_read(dev_priv, |
| TRANSCONF(dev_priv, cpu_transcoder)); |
| cur_state = !!(val & TRANSCONF_ENABLE); |
| |
| intel_display_power_put(dev_priv, power_domain, wakeref); |
| } else { |
| cur_state = false; |
| } |
| |
| I915_STATE_WARN(dev_priv, cur_state != state, |
| "transcoder %s assertion failure (expected %s, current %s)\n", |
| transcoder_name(cpu_transcoder), str_on_off(state), |
| str_on_off(cur_state)); |
| } |
| |
| static void assert_plane(struct intel_plane *plane, bool state) |
| { |
| struct drm_i915_private *i915 = to_i915(plane->base.dev); |
| enum pipe pipe; |
| bool cur_state; |
| |
| cur_state = plane->get_hw_state(plane, &pipe); |
| |
| I915_STATE_WARN(i915, cur_state != state, |
| "%s assertion failure (expected %s, current %s)\n", |
| plane->base.name, str_on_off(state), |
| str_on_off(cur_state)); |
| } |
| |
| #define assert_plane_enabled(p) assert_plane(p, true) |
| #define assert_plane_disabled(p) assert_plane(p, false) |
| |
| static void assert_planes_disabled(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_plane *plane; |
| |
| for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) |
| assert_plane_disabled(plane); |
| } |
| |
| void vlv_wait_port_ready(struct drm_i915_private *dev_priv, |
| struct intel_digital_port *dig_port, |
| unsigned int expected_mask) |
| { |
| u32 port_mask; |
| i915_reg_t dpll_reg; |
| |
| switch (dig_port->base.port) { |
| default: |
| MISSING_CASE(dig_port->base.port); |
| fallthrough; |
| case PORT_B: |
| port_mask = DPLL_PORTB_READY_MASK; |
| dpll_reg = DPLL(dev_priv, 0); |
| break; |
| case PORT_C: |
| port_mask = DPLL_PORTC_READY_MASK; |
| dpll_reg = DPLL(dev_priv, 0); |
| expected_mask <<= 4; |
| break; |
| case PORT_D: |
| port_mask = DPLL_PORTD_READY_MASK; |
| dpll_reg = DPIO_PHY_STATUS; |
| break; |
| } |
| |
| if (intel_de_wait(dev_priv, dpll_reg, port_mask, expected_mask, 1000)) |
| drm_WARN(&dev_priv->drm, 1, |
| "timed out waiting for [ENCODER:%d:%s] port ready: got 0x%x, expected 0x%x\n", |
| dig_port->base.base.base.id, dig_port->base.base.name, |
| intel_de_read(dev_priv, dpll_reg) & port_mask, |
| expected_mask); |
| } |
| |
| void intel_enable_transcoder(const struct intel_crtc_state *new_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder; |
| enum pipe pipe = crtc->pipe; |
| u32 val; |
| |
| drm_dbg_kms(&dev_priv->drm, "enabling pipe %c\n", pipe_name(pipe)); |
| |
| assert_planes_disabled(crtc); |
| |
| /* |
| * A pipe without a PLL won't actually be able to drive bits from |
| * a plane. On ILK+ the pipe PLLs are integrated, so we don't |
| * need the check. |
| */ |
| if (HAS_GMCH(dev_priv)) { |
| if (intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI)) |
| assert_dsi_pll_enabled(dev_priv); |
| else |
| assert_pll_enabled(dev_priv, pipe); |
| } else { |
| if (new_crtc_state->has_pch_encoder) { |
| /* if driving the PCH, we need FDI enabled */ |
| assert_fdi_rx_pll_enabled(dev_priv, |
| intel_crtc_pch_transcoder(crtc)); |
| assert_fdi_tx_pll_enabled(dev_priv, |
| (enum pipe) cpu_transcoder); |
| } |
| /* FIXME: assert CPU port conditions for SNB+ */ |
| } |
| |
| /* Wa_22012358565:adl-p */ |
| if (DISPLAY_VER(dev_priv) == 13) |
| intel_de_rmw(dev_priv, PIPE_ARB_CTL(dev_priv, pipe), |
| 0, PIPE_ARB_USE_PROG_SLOTS); |
| |
| if (DISPLAY_VER(dev_priv) >= 14) { |
| u32 clear = DP_DSC_INSERT_SF_AT_EOL_WA; |
| u32 set = 0; |
| |
| if (DISPLAY_VER(dev_priv) == 14) |
| set |= DP_FEC_BS_JITTER_WA; |
| |
| intel_de_rmw(dev_priv, |
| hsw_chicken_trans_reg(dev_priv, cpu_transcoder), |
| clear, set); |
| } |
| |
| val = intel_de_read(dev_priv, TRANSCONF(dev_priv, cpu_transcoder)); |
| if (val & TRANSCONF_ENABLE) { |
| /* we keep both pipes enabled on 830 */ |
| drm_WARN_ON(&dev_priv->drm, !IS_I830(dev_priv)); |
| return; |
| } |
| |
| /* Wa_1409098942:adlp+ */ |
| if (DISPLAY_VER(dev_priv) >= 13 && |
| new_crtc_state->dsc.compression_enable) { |
| val &= ~TRANSCONF_PIXEL_COUNT_SCALING_MASK; |
| val |= REG_FIELD_PREP(TRANSCONF_PIXEL_COUNT_SCALING_MASK, |
| TRANSCONF_PIXEL_COUNT_SCALING_X4); |
| } |
| |
| intel_de_write(dev_priv, TRANSCONF(dev_priv, cpu_transcoder), |
| val | TRANSCONF_ENABLE); |
| intel_de_posting_read(dev_priv, TRANSCONF(dev_priv, cpu_transcoder)); |
| |
| /* |
| * Until the pipe starts PIPEDSL reads will return a stale value, |
| * which causes an apparent vblank timestamp jump when PIPEDSL |
| * resets to its proper value. That also messes up the frame count |
| * when it's derived from the timestamps. So let's wait for the |
| * pipe to start properly before we call drm_crtc_vblank_on() |
| */ |
| if (intel_crtc_max_vblank_count(new_crtc_state) == 0) |
| intel_wait_for_pipe_scanline_moving(crtc); |
| } |
| |
| void intel_disable_transcoder(const struct intel_crtc_state *old_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder; |
| enum pipe pipe = crtc->pipe; |
| u32 val; |
| |
| drm_dbg_kms(&dev_priv->drm, "disabling pipe %c\n", pipe_name(pipe)); |
| |
| /* |
| * Make sure planes won't keep trying to pump pixels to us, |
| * or we might hang the display. |
| */ |
| assert_planes_disabled(crtc); |
| |
| val = intel_de_read(dev_priv, TRANSCONF(dev_priv, cpu_transcoder)); |
| if ((val & TRANSCONF_ENABLE) == 0) |
| return; |
| |
| /* |
| * Double wide has implications for planes |
| * so best keep it disabled when not needed. |
| */ |
| if (old_crtc_state->double_wide) |
| val &= ~TRANSCONF_DOUBLE_WIDE; |
| |
| /* Don't disable pipe or pipe PLLs if needed */ |
| if (!IS_I830(dev_priv)) |
| val &= ~TRANSCONF_ENABLE; |
| |
| /* Wa_1409098942:adlp+ */ |
| if (DISPLAY_VER(dev_priv) >= 13 && |
| old_crtc_state->dsc.compression_enable) |
| val &= ~TRANSCONF_PIXEL_COUNT_SCALING_MASK; |
| |
| intel_de_write(dev_priv, TRANSCONF(dev_priv, cpu_transcoder), val); |
| |
| if (DISPLAY_VER(dev_priv) >= 12) |
| intel_de_rmw(dev_priv, hsw_chicken_trans_reg(dev_priv, cpu_transcoder), |
| FECSTALL_DIS_DPTSTREAM_DPTTG, 0); |
| |
| if ((val & TRANSCONF_ENABLE) == 0) |
| intel_wait_for_pipe_off(old_crtc_state); |
| } |
| |
| unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info) |
| { |
| unsigned int size = 0; |
| int i; |
| |
| for (i = 0 ; i < ARRAY_SIZE(rot_info->plane); i++) |
| size += rot_info->plane[i].dst_stride * rot_info->plane[i].width; |
| |
| return size; |
| } |
| |
| unsigned int intel_remapped_info_size(const struct intel_remapped_info *rem_info) |
| { |
| unsigned int size = 0; |
| int i; |
| |
| for (i = 0 ; i < ARRAY_SIZE(rem_info->plane); i++) { |
| unsigned int plane_size; |
| |
| if (rem_info->plane[i].linear) |
| plane_size = rem_info->plane[i].size; |
| else |
| plane_size = rem_info->plane[i].dst_stride * rem_info->plane[i].height; |
| |
| if (plane_size == 0) |
| continue; |
| |
| if (rem_info->plane_alignment) |
| size = ALIGN(size, rem_info->plane_alignment); |
| |
| size += plane_size; |
| } |
| |
| return size; |
| } |
| |
| bool intel_plane_uses_fence(const struct intel_plane_state *plane_state) |
| { |
| struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane); |
| struct drm_i915_private *dev_priv = to_i915(plane->base.dev); |
| |
| return DISPLAY_VER(dev_priv) < 4 || |
| (plane->fbc && !plane_state->no_fbc_reason && |
| plane_state->view.gtt.type == I915_GTT_VIEW_NORMAL); |
| } |
| |
| /* |
| * Convert the x/y offsets into a linear offset. |
| * Only valid with 0/180 degree rotation, which is fine since linear |
| * offset is only used with linear buffers on pre-hsw and tiled buffers |
| * with gen2/3, and 90/270 degree rotations isn't supported on any of them. |
| */ |
| u32 intel_fb_xy_to_linear(int x, int y, |
| const struct intel_plane_state *state, |
| int color_plane) |
| { |
| const struct drm_framebuffer *fb = state->hw.fb; |
| unsigned int cpp = fb->format->cpp[color_plane]; |
| unsigned int pitch = state->view.color_plane[color_plane].mapping_stride; |
| |
| return y * pitch + x * cpp; |
| } |
| |
| /* |
| * Add the x/y offsets derived from fb->offsets[] to the user |
| * specified plane src x/y offsets. The resulting x/y offsets |
| * specify the start of scanout from the beginning of the gtt mapping. |
| */ |
| void intel_add_fb_offsets(int *x, int *y, |
| const struct intel_plane_state *state, |
| int color_plane) |
| |
| { |
| *x += state->view.color_plane[color_plane].x; |
| *y += state->view.color_plane[color_plane].y; |
| } |
| |
| u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv, |
| u32 pixel_format, u64 modifier) |
| { |
| struct intel_crtc *crtc; |
| struct intel_plane *plane; |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return 0; |
| |
| /* |
| * We assume the primary plane for pipe A has |
| * the highest stride limits of them all, |
| * if in case pipe A is disabled, use the first pipe from pipe_mask. |
| */ |
| crtc = intel_first_crtc(dev_priv); |
| if (!crtc) |
| return 0; |
| |
| plane = to_intel_plane(crtc->base.primary); |
| |
| return plane->max_stride(plane, pixel_format, modifier, |
| DRM_MODE_ROTATE_0); |
| } |
| |
| void intel_set_plane_visible(struct intel_crtc_state *crtc_state, |
| struct intel_plane_state *plane_state, |
| bool visible) |
| { |
| struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane); |
| |
| plane_state->uapi.visible = visible; |
| |
| if (visible) |
| crtc_state->uapi.plane_mask |= drm_plane_mask(&plane->base); |
| else |
| crtc_state->uapi.plane_mask &= ~drm_plane_mask(&plane->base); |
| } |
| |
| void intel_plane_fixup_bitmasks(struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| struct drm_plane *plane; |
| |
| /* |
| * Active_planes aliases if multiple "primary" or cursor planes |
| * have been used on the same (or wrong) pipe. plane_mask uses |
| * unique ids, hence we can use that to reconstruct active_planes. |
| */ |
| crtc_state->enabled_planes = 0; |
| crtc_state->active_planes = 0; |
| |
| drm_for_each_plane_mask(plane, &dev_priv->drm, |
| crtc_state->uapi.plane_mask) { |
| crtc_state->enabled_planes |= BIT(to_intel_plane(plane)->id); |
| crtc_state->active_planes |= BIT(to_intel_plane(plane)->id); |
| } |
| } |
| |
| void intel_plane_disable_noatomic(struct intel_crtc *crtc, |
| struct intel_plane *plane) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "Disabling [PLANE:%d:%s] on [CRTC:%d:%s]\n", |
| plane->base.base.id, plane->base.name, |
| crtc->base.base.id, crtc->base.name); |
| |
| intel_set_plane_visible(crtc_state, plane_state, false); |
| intel_plane_fixup_bitmasks(crtc_state); |
| crtc_state->data_rate[plane->id] = 0; |
| crtc_state->data_rate_y[plane->id] = 0; |
| crtc_state->rel_data_rate[plane->id] = 0; |
| crtc_state->rel_data_rate_y[plane->id] = 0; |
| crtc_state->min_cdclk[plane->id] = 0; |
| |
| if ((crtc_state->active_planes & ~BIT(PLANE_CURSOR)) == 0 && |
| hsw_ips_disable(crtc_state)) { |
| crtc_state->ips_enabled = false; |
| intel_crtc_wait_for_next_vblank(crtc); |
| } |
| |
| /* |
| * Vblank time updates from the shadow to live plane control register |
| * are blocked if the memory self-refresh mode is active at that |
| * moment. So to make sure the plane gets truly disabled, disable |
| * first the self-refresh mode. The self-refresh enable bit in turn |
| * will be checked/applied by the HW only at the next frame start |
| * event which is after the vblank start event, so we need to have a |
| * wait-for-vblank between disabling the plane and the pipe. |
| */ |
| if (HAS_GMCH(dev_priv) && |
| intel_set_memory_cxsr(dev_priv, false)) |
| intel_crtc_wait_for_next_vblank(crtc); |
| |
| /* |
| * Gen2 reports pipe underruns whenever all planes are disabled. |
| * So disable underrun reporting before all the planes get disabled. |
| */ |
| if (DISPLAY_VER(dev_priv) == 2 && !crtc_state->active_planes) |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, false); |
| |
| intel_plane_disable_arm(plane, crtc_state); |
| intel_crtc_wait_for_next_vblank(crtc); |
| } |
| |
| unsigned int |
| intel_plane_fence_y_offset(const struct intel_plane_state *plane_state) |
| { |
| int x = 0, y = 0; |
| |
| intel_plane_adjust_aligned_offset(&x, &y, plane_state, 0, |
| plane_state->view.color_plane[0].offset, 0); |
| |
| return y; |
| } |
| |
| static void icl_set_pipe_chicken(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| u32 tmp; |
| |
| tmp = intel_de_read(dev_priv, PIPE_CHICKEN(pipe)); |
| |
| /* |
| * Display WA #1153: icl |
| * enable hardware to bypass the alpha math |
| * and rounding for per-pixel values 00 and 0xff |
| */ |
| tmp |= PER_PIXEL_ALPHA_BYPASS_EN; |
| /* |
| * Display WA # 1605353570: icl |
| * Set the pixel rounding bit to 1 for allowing |
| * passthrough of Frame buffer pixels unmodified |
| * across pipe |
| */ |
| tmp |= PIXEL_ROUNDING_TRUNC_FB_PASSTHRU; |
| |
| /* |
| * Underrun recovery must always be disabled on display 13+. |
| * DG2 chicken bit meaning is inverted compared to other platforms. |
| */ |
| if (IS_DG2(dev_priv)) |
| tmp &= ~UNDERRUN_RECOVERY_ENABLE_DG2; |
| else if (DISPLAY_VER(dev_priv) >= 13) |
| tmp |= UNDERRUN_RECOVERY_DISABLE_ADLP; |
| |
| /* Wa_14010547955:dg2 */ |
| if (IS_DG2(dev_priv)) |
| tmp |= DG2_RENDER_CCSTAG_4_3_EN; |
| |
| intel_de_write(dev_priv, PIPE_CHICKEN(pipe), tmp); |
| } |
| |
| bool intel_has_pending_fb_unpin(struct drm_i915_private *dev_priv) |
| { |
| struct drm_crtc *crtc; |
| bool cleanup_done; |
| |
| drm_for_each_crtc(crtc, &dev_priv->drm) { |
| struct drm_crtc_commit *commit; |
| spin_lock(&crtc->commit_lock); |
| commit = list_first_entry_or_null(&crtc->commit_list, |
| struct drm_crtc_commit, commit_entry); |
| cleanup_done = commit ? |
| try_wait_for_completion(&commit->cleanup_done) : true; |
| spin_unlock(&crtc->commit_lock); |
| |
| if (cleanup_done) |
| continue; |
| |
| intel_crtc_wait_for_next_vblank(to_intel_crtc(crtc)); |
| |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /* |
| * Finds the encoder associated with the given CRTC. This can only be |
| * used when we know that the CRTC isn't feeding multiple encoders! |
| */ |
| struct intel_encoder * |
| intel_get_crtc_new_encoder(const struct intel_atomic_state *state, |
| const struct intel_crtc_state *crtc_state) |
| { |
| const struct drm_connector_state *connector_state; |
| const struct drm_connector *connector; |
| struct intel_encoder *encoder = NULL; |
| struct intel_crtc *primary_crtc; |
| int num_encoders = 0; |
| int i; |
| |
| primary_crtc = intel_primary_crtc(crtc_state); |
| |
| for_each_new_connector_in_state(&state->base, connector, connector_state, i) { |
| if (connector_state->crtc != &primary_crtc->base) |
| continue; |
| |
| encoder = to_intel_encoder(connector_state->best_encoder); |
| num_encoders++; |
| } |
| |
| drm_WARN(state->base.dev, num_encoders != 1, |
| "%d encoders for pipe %c\n", |
| num_encoders, pipe_name(primary_crtc->pipe)); |
| |
| return encoder; |
| } |
| |
| static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| const struct drm_rect *dst = &crtc_state->pch_pfit.dst; |
| enum pipe pipe = crtc->pipe; |
| int width = drm_rect_width(dst); |
| int height = drm_rect_height(dst); |
| int x = dst->x1; |
| int y = dst->y1; |
| |
| if (!crtc_state->pch_pfit.enabled) |
| return; |
| |
| /* Force use of hard-coded filter coefficients |
| * as some pre-programmed values are broken, |
| * e.g. x201. |
| */ |
| if (IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv)) |
| intel_de_write_fw(dev_priv, PF_CTL(pipe), PF_ENABLE | |
| PF_FILTER_MED_3x3 | PF_PIPE_SEL_IVB(pipe)); |
| else |
| intel_de_write_fw(dev_priv, PF_CTL(pipe), PF_ENABLE | |
| PF_FILTER_MED_3x3); |
| intel_de_write_fw(dev_priv, PF_WIN_POS(pipe), |
| PF_WIN_XPOS(x) | PF_WIN_YPOS(y)); |
| intel_de_write_fw(dev_priv, PF_WIN_SZ(pipe), |
| PF_WIN_XSIZE(width) | PF_WIN_YSIZE(height)); |
| } |
| |
| static void intel_crtc_dpms_overlay_disable(struct intel_crtc *crtc) |
| { |
| if (crtc->overlay) |
| (void) intel_overlay_switch_off(crtc->overlay); |
| |
| /* Let userspace switch the overlay on again. In most cases userspace |
| * has to recompute where to put it anyway. |
| */ |
| } |
| |
| static bool needs_nv12_wa(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| |
| if (!crtc_state->nv12_planes) |
| return false; |
| |
| /* WA Display #0827: Gen9:all */ |
| if (DISPLAY_VER(dev_priv) == 9) |
| return true; |
| |
| return false; |
| } |
| |
| static bool needs_scalerclk_wa(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| |
| /* Wa_2006604312:icl,ehl */ |
| if (crtc_state->scaler_state.scaler_users > 0 && DISPLAY_VER(dev_priv) == 11) |
| return true; |
| |
| return false; |
| } |
| |
| static bool needs_cursorclk_wa(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| |
| /* Wa_1604331009:icl,jsl,ehl */ |
| if (is_hdr_mode(crtc_state) && |
| crtc_state->active_planes & BIT(PLANE_CURSOR) && |
| DISPLAY_VER(dev_priv) == 11) |
| return true; |
| |
| return false; |
| } |
| |
| static void intel_async_flip_vtd_wa(struct drm_i915_private *i915, |
| enum pipe pipe, bool enable) |
| { |
| if (DISPLAY_VER(i915) == 9) { |
| /* |
| * "Plane N strech max must be programmed to 11b (x1) |
| * when Async flips are enabled on that plane." |
| */ |
| intel_de_rmw(i915, CHICKEN_PIPESL_1(pipe), |
| SKL_PLANE1_STRETCH_MAX_MASK, |
| enable ? SKL_PLANE1_STRETCH_MAX_X1 : SKL_PLANE1_STRETCH_MAX_X8); |
| } else { |
| /* Also needed on HSW/BDW albeit undocumented */ |
| intel_de_rmw(i915, CHICKEN_PIPESL_1(pipe), |
| HSW_PRI_STRETCH_MAX_MASK, |
| enable ? HSW_PRI_STRETCH_MAX_X1 : HSW_PRI_STRETCH_MAX_X8); |
| } |
| } |
| |
| static bool needs_async_flip_vtd_wa(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| |
| return crtc_state->uapi.async_flip && i915_vtd_active(i915) && |
| (DISPLAY_VER(i915) == 9 || IS_BROADWELL(i915) || IS_HASWELL(i915)); |
| } |
| |
| static void intel_encoders_audio_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct drm_connector_state *conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, conn, conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(conn_state->best_encoder); |
| |
| if (conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->audio_enable) |
| encoder->audio_enable(encoder, crtc_state, conn_state); |
| } |
| } |
| |
| static void intel_encoders_audio_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct drm_connector_state *old_conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(old_conn_state->best_encoder); |
| |
| if (old_conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->audio_disable) |
| encoder->audio_disable(encoder, old_crtc_state, old_conn_state); |
| } |
| } |
| |
| #define is_enabling(feature, old_crtc_state, new_crtc_state) \ |
| ((!(old_crtc_state)->feature || intel_crtc_needs_modeset(new_crtc_state)) && \ |
| (new_crtc_state)->feature) |
| #define is_disabling(feature, old_crtc_state, new_crtc_state) \ |
| ((old_crtc_state)->feature && \ |
| (!(new_crtc_state)->feature || intel_crtc_needs_modeset(new_crtc_state))) |
| |
| static bool planes_enabling(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| if (!new_crtc_state->hw.active) |
| return false; |
| |
| return is_enabling(active_planes, old_crtc_state, new_crtc_state); |
| } |
| |
| static bool planes_disabling(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| if (!old_crtc_state->hw.active) |
| return false; |
| |
| return is_disabling(active_planes, old_crtc_state, new_crtc_state); |
| } |
| |
| static bool vrr_params_changed(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| return old_crtc_state->vrr.flipline != new_crtc_state->vrr.flipline || |
| old_crtc_state->vrr.vmin != new_crtc_state->vrr.vmin || |
| old_crtc_state->vrr.vmax != new_crtc_state->vrr.vmax || |
| old_crtc_state->vrr.guardband != new_crtc_state->vrr.guardband || |
| old_crtc_state->vrr.pipeline_full != new_crtc_state->vrr.pipeline_full; |
| } |
| |
| static bool cmrr_params_changed(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| return old_crtc_state->cmrr.cmrr_m != new_crtc_state->cmrr.cmrr_m || |
| old_crtc_state->cmrr.cmrr_n != new_crtc_state->cmrr.cmrr_n; |
| } |
| |
| static bool vrr_enabling(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| if (!new_crtc_state->hw.active) |
| return false; |
| |
| return is_enabling(vrr.enable, old_crtc_state, new_crtc_state) || |
| (new_crtc_state->vrr.enable && |
| (new_crtc_state->update_m_n || new_crtc_state->update_lrr || |
| vrr_params_changed(old_crtc_state, new_crtc_state))); |
| } |
| |
| static bool vrr_disabling(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| if (!old_crtc_state->hw.active) |
| return false; |
| |
| return is_disabling(vrr.enable, old_crtc_state, new_crtc_state) || |
| (old_crtc_state->vrr.enable && |
| (new_crtc_state->update_m_n || new_crtc_state->update_lrr || |
| vrr_params_changed(old_crtc_state, new_crtc_state))); |
| } |
| |
| static bool audio_enabling(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| if (!new_crtc_state->hw.active) |
| return false; |
| |
| return is_enabling(has_audio, old_crtc_state, new_crtc_state) || |
| (new_crtc_state->has_audio && |
| memcmp(old_crtc_state->eld, new_crtc_state->eld, MAX_ELD_BYTES) != 0); |
| } |
| |
| static bool audio_disabling(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| if (!old_crtc_state->hw.active) |
| return false; |
| |
| return is_disabling(has_audio, old_crtc_state, new_crtc_state) || |
| (old_crtc_state->has_audio && |
| memcmp(old_crtc_state->eld, new_crtc_state->eld, MAX_ELD_BYTES) != 0); |
| } |
| |
| #undef is_disabling |
| #undef is_enabling |
| |
| static void intel_post_plane_update(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| enum pipe pipe = crtc->pipe; |
| |
| intel_psr_post_plane_update(state, crtc); |
| |
| intel_frontbuffer_flip(dev_priv, new_crtc_state->fb_bits); |
| |
| if (new_crtc_state->update_wm_post && new_crtc_state->hw.active) |
| intel_update_watermarks(dev_priv); |
| |
| intel_fbc_post_update(state, crtc); |
| |
| if (needs_async_flip_vtd_wa(old_crtc_state) && |
| !needs_async_flip_vtd_wa(new_crtc_state)) |
| intel_async_flip_vtd_wa(dev_priv, pipe, false); |
| |
| if (needs_nv12_wa(old_crtc_state) && |
| !needs_nv12_wa(new_crtc_state)) |
| skl_wa_827(dev_priv, pipe, false); |
| |
| if (needs_scalerclk_wa(old_crtc_state) && |
| !needs_scalerclk_wa(new_crtc_state)) |
| icl_wa_scalerclkgating(dev_priv, pipe, false); |
| |
| if (needs_cursorclk_wa(old_crtc_state) && |
| !needs_cursorclk_wa(new_crtc_state)) |
| icl_wa_cursorclkgating(dev_priv, pipe, false); |
| |
| if (intel_crtc_needs_color_update(new_crtc_state)) |
| intel_color_post_update(new_crtc_state); |
| |
| if (audio_enabling(old_crtc_state, new_crtc_state)) |
| intel_encoders_audio_enable(state, crtc); |
| } |
| |
| static void intel_crtc_enable_flip_done(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| u8 update_planes = crtc_state->update_planes; |
| const struct intel_plane_state __maybe_unused *plane_state; |
| struct intel_plane *plane; |
| int i; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| if (plane->pipe == crtc->pipe && |
| update_planes & BIT(plane->id)) |
| plane->enable_flip_done(plane); |
| } |
| } |
| |
| static void intel_crtc_disable_flip_done(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| u8 update_planes = crtc_state->update_planes; |
| const struct intel_plane_state __maybe_unused *plane_state; |
| struct intel_plane *plane; |
| int i; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| if (plane->pipe == crtc->pipe && |
| update_planes & BIT(plane->id)) |
| plane->disable_flip_done(plane); |
| } |
| } |
| |
| static void intel_crtc_async_flip_disable_wa(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| u8 disable_async_flip_planes = old_crtc_state->async_flip_planes & |
| ~new_crtc_state->async_flip_planes; |
| const struct intel_plane_state *old_plane_state; |
| struct intel_plane *plane; |
| bool need_vbl_wait = false; |
| int i; |
| |
| for_each_old_intel_plane_in_state(state, plane, old_plane_state, i) { |
| if (plane->need_async_flip_toggle_wa && |
| plane->pipe == crtc->pipe && |
| disable_async_flip_planes & BIT(plane->id)) { |
| /* |
| * Apart from the async flip bit we want to |
| * preserve the old state for the plane. |
| */ |
| intel_plane_async_flip(plane, old_crtc_state, |
| old_plane_state, false); |
| need_vbl_wait = true; |
| } |
| } |
| |
| if (need_vbl_wait) |
| intel_crtc_wait_for_next_vblank(crtc); |
| } |
| |
| static void intel_pre_plane_update(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| enum pipe pipe = crtc->pipe; |
| |
| if (vrr_disabling(old_crtc_state, new_crtc_state)) { |
| intel_vrr_disable(old_crtc_state); |
| intel_crtc_update_active_timings(old_crtc_state, false); |
| } |
| |
| if (audio_disabling(old_crtc_state, new_crtc_state)) |
| intel_encoders_audio_disable(state, crtc); |
| |
| intel_drrs_deactivate(old_crtc_state); |
| |
| intel_psr_pre_plane_update(state, crtc); |
| |
| if (hsw_ips_pre_update(state, crtc)) |
| intel_crtc_wait_for_next_vblank(crtc); |
| |
| if (intel_fbc_pre_update(state, crtc)) |
| intel_crtc_wait_for_next_vblank(crtc); |
| |
| if (!needs_async_flip_vtd_wa(old_crtc_state) && |
| needs_async_flip_vtd_wa(new_crtc_state)) |
| intel_async_flip_vtd_wa(dev_priv, pipe, true); |
| |
| /* Display WA 827 */ |
| if (!needs_nv12_wa(old_crtc_state) && |
| needs_nv12_wa(new_crtc_state)) |
| skl_wa_827(dev_priv, pipe, true); |
| |
| /* Wa_2006604312:icl,ehl */ |
| if (!needs_scalerclk_wa(old_crtc_state) && |
| needs_scalerclk_wa(new_crtc_state)) |
| icl_wa_scalerclkgating(dev_priv, pipe, true); |
| |
| /* Wa_1604331009:icl,jsl,ehl */ |
| if (!needs_cursorclk_wa(old_crtc_state) && |
| needs_cursorclk_wa(new_crtc_state)) |
| icl_wa_cursorclkgating(dev_priv, pipe, true); |
| |
| /* |
| * Vblank time updates from the shadow to live plane control register |
| * are blocked if the memory self-refresh mode is active at that |
| * moment. So to make sure the plane gets truly disabled, disable |
| * first the self-refresh mode. The self-refresh enable bit in turn |
| * will be checked/applied by the HW only at the next frame start |
| * event which is after the vblank start event, so we need to have a |
| * wait-for-vblank between disabling the plane and the pipe. |
| */ |
| if (HAS_GMCH(dev_priv) && old_crtc_state->hw.active && |
| new_crtc_state->disable_cxsr && intel_set_memory_cxsr(dev_priv, false)) |
| intel_crtc_wait_for_next_vblank(crtc); |
| |
| /* |
| * IVB workaround: must disable low power watermarks for at least |
| * one frame before enabling scaling. LP watermarks can be re-enabled |
| * when scaling is disabled. |
| * |
| * WaCxSRDisabledForSpriteScaling:ivb |
| */ |
| if (old_crtc_state->hw.active && |
| new_crtc_state->disable_lp_wm && ilk_disable_lp_wm(dev_priv)) |
| intel_crtc_wait_for_next_vblank(crtc); |
| |
| /* |
| * If we're doing a modeset we don't need to do any |
| * pre-vblank watermark programming here. |
| */ |
| if (!intel_crtc_needs_modeset(new_crtc_state)) { |
| /* |
| * For platforms that support atomic watermarks, program the |
| * 'intermediate' watermarks immediately. On pre-gen9 platforms, these |
| * will be the intermediate values that are safe for both pre- and |
| * post- vblank; when vblank happens, the 'active' values will be set |
| * to the final 'target' values and we'll do this again to get the |
| * optimal watermarks. For gen9+ platforms, the values we program here |
| * will be the final target values which will get automatically latched |
| * at vblank time; no further programming will be necessary. |
| * |
| * If a platform hasn't been transitioned to atomic watermarks yet, |
| * we'll continue to update watermarks the old way, if flags tell |
| * us to. |
| */ |
| if (!intel_initial_watermarks(state, crtc)) |
| if (new_crtc_state->update_wm_pre) |
| intel_update_watermarks(dev_priv); |
| } |
| |
| /* |
| * Gen2 reports pipe underruns whenever all planes are disabled. |
| * So disable underrun reporting before all the planes get disabled. |
| * |
| * We do this after .initial_watermarks() so that we have a |
| * chance of catching underruns with the intermediate watermarks |
| * vs. the old plane configuration. |
| */ |
| if (DISPLAY_VER(dev_priv) == 2 && planes_disabling(old_crtc_state, new_crtc_state)) |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false); |
| |
| /* |
| * WA for platforms where async address update enable bit |
| * is double buffered and only latched at start of vblank. |
| */ |
| if (old_crtc_state->async_flip_planes & ~new_crtc_state->async_flip_planes) |
| intel_crtc_async_flip_disable_wa(state, crtc); |
| } |
| |
| static void intel_crtc_disable_planes(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| unsigned int update_mask = new_crtc_state->update_planes; |
| const struct intel_plane_state *old_plane_state; |
| struct intel_plane *plane; |
| unsigned fb_bits = 0; |
| int i; |
| |
| intel_crtc_dpms_overlay_disable(crtc); |
| |
| for_each_old_intel_plane_in_state(state, plane, old_plane_state, i) { |
| if (crtc->pipe != plane->pipe || |
| !(update_mask & BIT(plane->id))) |
| continue; |
| |
| intel_plane_disable_arm(plane, new_crtc_state); |
| |
| if (old_plane_state->uapi.visible) |
| fb_bits |= plane->frontbuffer_bit; |
| } |
| |
| intel_frontbuffer_flip(dev_priv, fb_bits); |
| } |
| |
| static void intel_encoders_update_prepare(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct intel_crtc_state *new_crtc_state, *old_crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| /* |
| * Make sure the DPLL state is up-to-date for fastset TypeC ports after non-blocking commits. |
| * TODO: Update the DPLL state for all cases in the encoder->update_prepare() hook. |
| */ |
| if (i915->display.dpll.mgr) { |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| if (intel_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| new_crtc_state->shared_dpll = old_crtc_state->shared_dpll; |
| new_crtc_state->dpll_hw_state = old_crtc_state->dpll_hw_state; |
| } |
| } |
| } |
| |
| static void intel_encoders_pre_pll_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct drm_connector_state *conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, conn, conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(conn_state->best_encoder); |
| |
| if (conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->pre_pll_enable) |
| encoder->pre_pll_enable(state, encoder, |
| crtc_state, conn_state); |
| } |
| } |
| |
| static void intel_encoders_pre_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct drm_connector_state *conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, conn, conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(conn_state->best_encoder); |
| |
| if (conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->pre_enable) |
| encoder->pre_enable(state, encoder, |
| crtc_state, conn_state); |
| } |
| } |
| |
| static void intel_encoders_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct drm_connector_state *conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, conn, conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(conn_state->best_encoder); |
| |
| if (conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->enable) |
| encoder->enable(state, encoder, |
| crtc_state, conn_state); |
| intel_opregion_notify_encoder(encoder, true); |
| } |
| } |
| |
| static void intel_encoders_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct drm_connector_state *old_conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(old_conn_state->best_encoder); |
| |
| if (old_conn_state->crtc != &crtc->base) |
| continue; |
| |
| intel_opregion_notify_encoder(encoder, false); |
| if (encoder->disable) |
| encoder->disable(state, encoder, |
| old_crtc_state, old_conn_state); |
| } |
| } |
| |
| static void intel_encoders_post_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct drm_connector_state *old_conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(old_conn_state->best_encoder); |
| |
| if (old_conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->post_disable) |
| encoder->post_disable(state, encoder, |
| old_crtc_state, old_conn_state); |
| } |
| } |
| |
| static void intel_encoders_post_pll_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct drm_connector_state *old_conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(old_conn_state->best_encoder); |
| |
| if (old_conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->post_pll_disable) |
| encoder->post_pll_disable(state, encoder, |
| old_crtc_state, old_conn_state); |
| } |
| } |
| |
| static void intel_encoders_update_pipe(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct drm_connector_state *conn_state; |
| struct drm_connector *conn; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, conn, conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(conn_state->best_encoder); |
| |
| if (conn_state->crtc != &crtc->base) |
| continue; |
| |
| if (encoder->update_pipe) |
| encoder->update_pipe(state, encoder, |
| crtc_state, conn_state); |
| } |
| } |
| |
| static void intel_disable_primary_plane(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct intel_plane *plane = to_intel_plane(crtc->base.primary); |
| |
| plane->disable_arm(plane, crtc_state); |
| } |
| |
| static void ilk_configure_cpu_transcoder(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| |
| if (crtc_state->has_pch_encoder) { |
| intel_cpu_transcoder_set_m1_n1(crtc, cpu_transcoder, |
| &crtc_state->fdi_m_n); |
| } else if (intel_crtc_has_dp_encoder(crtc_state)) { |
| intel_cpu_transcoder_set_m1_n1(crtc, cpu_transcoder, |
| &crtc_state->dp_m_n); |
| intel_cpu_transcoder_set_m2_n2(crtc, cpu_transcoder, |
| &crtc_state->dp_m2_n2); |
| } |
| |
| intel_set_transcoder_timings(crtc_state); |
| |
| ilk_set_pipeconf(crtc_state); |
| } |
| |
| static void ilk_crtc_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| if (drm_WARN_ON(&dev_priv->drm, crtc->active)) |
| return; |
| |
| /* |
| * Sometimes spurious CPU pipe underruns happen during FDI |
| * training, at least with VGA+HDMI cloning. Suppress them. |
| * |
| * On ILK we get an occasional spurious CPU pipe underruns |
| * between eDP port A enable and vdd enable. Also PCH port |
| * enable seems to result in the occasional CPU pipe underrun. |
| * |
| * Spurious PCH underruns also occur during PCH enabling. |
| */ |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false); |
| intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false); |
| |
| ilk_configure_cpu_transcoder(new_crtc_state); |
| |
| intel_set_pipe_src_size(new_crtc_state); |
| |
| crtc->active = true; |
| |
| intel_encoders_pre_enable(state, crtc); |
| |
| if (new_crtc_state->has_pch_encoder) { |
| ilk_pch_pre_enable(state, crtc); |
| } else { |
| assert_fdi_tx_disabled(dev_priv, pipe); |
| assert_fdi_rx_disabled(dev_priv, pipe); |
| } |
| |
| ilk_pfit_enable(new_crtc_state); |
| |
| /* |
| * On ILK+ LUT must be loaded before the pipe is running but with |
| * clocks enabled |
| */ |
| intel_color_load_luts(new_crtc_state); |
| intel_color_commit_noarm(new_crtc_state); |
| intel_color_commit_arm(new_crtc_state); |
| /* update DSPCNTR to configure gamma for pipe bottom color */ |
| intel_disable_primary_plane(new_crtc_state); |
| |
| intel_initial_watermarks(state, crtc); |
| intel_enable_transcoder(new_crtc_state); |
| |
| if (new_crtc_state->has_pch_encoder) |
| ilk_pch_enable(state, crtc); |
| |
| intel_crtc_vblank_on(new_crtc_state); |
| |
| intel_encoders_enable(state, crtc); |
| |
| if (HAS_PCH_CPT(dev_priv)) |
| intel_wait_for_pipe_scanline_moving(crtc); |
| |
| /* |
| * Must wait for vblank to avoid spurious PCH FIFO underruns. |
| * And a second vblank wait is needed at least on ILK with |
| * some interlaced HDMI modes. Let's do the double wait always |
| * in case there are more corner cases we don't know about. |
| */ |
| if (new_crtc_state->has_pch_encoder) { |
| intel_crtc_wait_for_next_vblank(crtc); |
| intel_crtc_wait_for_next_vblank(crtc); |
| } |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); |
| intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true); |
| } |
| |
| /* Display WA #1180: WaDisableScalarClockGating: glk */ |
| static bool glk_need_scaler_clock_gating_wa(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| |
| return DISPLAY_VER(i915) == 10 && crtc_state->pch_pfit.enabled; |
| } |
| |
| static void glk_pipe_scaler_clock_gating_wa(struct intel_crtc *crtc, bool enable) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| u32 mask = DPF_GATING_DIS | DPF_RAM_GATING_DIS | DPFR_GATING_DIS; |
| |
| intel_de_rmw(i915, CLKGATE_DIS_PSL(crtc->pipe), |
| mask, enable ? mask : 0); |
| } |
| |
| static void hsw_set_linetime_wm(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| intel_de_write(dev_priv, WM_LINETIME(crtc->pipe), |
| HSW_LINETIME(crtc_state->linetime) | |
| HSW_IPS_LINETIME(crtc_state->ips_linetime)); |
| } |
| |
| static void hsw_set_frame_start_delay(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| |
| intel_de_rmw(i915, hsw_chicken_trans_reg(i915, crtc_state->cpu_transcoder), |
| HSW_FRAME_START_DELAY_MASK, |
| HSW_FRAME_START_DELAY(crtc_state->framestart_delay - 1)); |
| } |
| |
| static void hsw_configure_cpu_transcoder(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| |
| if (crtc_state->has_pch_encoder) { |
| intel_cpu_transcoder_set_m1_n1(crtc, cpu_transcoder, |
| &crtc_state->fdi_m_n); |
| } else if (intel_crtc_has_dp_encoder(crtc_state)) { |
| intel_cpu_transcoder_set_m1_n1(crtc, cpu_transcoder, |
| &crtc_state->dp_m_n); |
| intel_cpu_transcoder_set_m2_n2(crtc, cpu_transcoder, |
| &crtc_state->dp_m2_n2); |
| } |
| |
| intel_set_transcoder_timings(crtc_state); |
| if (HAS_VRR(dev_priv)) |
| intel_vrr_set_transcoder_timings(crtc_state); |
| |
| if (cpu_transcoder != TRANSCODER_EDP) |
| intel_de_write(dev_priv, TRANS_MULT(dev_priv, cpu_transcoder), |
| crtc_state->pixel_multiplier - 1); |
| |
| hsw_set_frame_start_delay(crtc_state); |
| |
| hsw_set_transconf(crtc_state); |
| } |
| |
| static void hsw_crtc_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder; |
| struct intel_crtc *pipe_crtc; |
| |
| if (drm_WARN_ON(&dev_priv->drm, crtc->active)) |
| return; |
| |
| for_each_intel_crtc_in_pipe_mask_reverse(&dev_priv->drm, pipe_crtc, |
| intel_crtc_joined_pipe_mask(new_crtc_state)) |
| intel_dmc_enable_pipe(dev_priv, pipe_crtc->pipe); |
| |
| intel_encoders_pre_pll_enable(state, crtc); |
| |
| for_each_intel_crtc_in_pipe_mask_reverse(&dev_priv->drm, pipe_crtc, |
| intel_crtc_joined_pipe_mask(new_crtc_state)) { |
| const struct intel_crtc_state *pipe_crtc_state = |
| intel_atomic_get_new_crtc_state(state, pipe_crtc); |
| |
| if (pipe_crtc_state->shared_dpll) |
| intel_enable_shared_dpll(pipe_crtc_state); |
| } |
| |
| intel_encoders_pre_enable(state, crtc); |
| |
| for_each_intel_crtc_in_pipe_mask_reverse(&dev_priv->drm, pipe_crtc, |
| intel_crtc_joined_pipe_mask(new_crtc_state)) { |
| const struct intel_crtc_state *pipe_crtc_state = |
| intel_atomic_get_new_crtc_state(state, pipe_crtc); |
| |
| intel_dsc_enable(pipe_crtc_state); |
| |
| if (DISPLAY_VER(dev_priv) >= 13) |
| intel_uncompressed_joiner_enable(pipe_crtc_state); |
| |
| intel_set_pipe_src_size(pipe_crtc_state); |
| |
| if (DISPLAY_VER(dev_priv) >= 9 || IS_BROADWELL(dev_priv)) |
| bdw_set_pipe_misc(pipe_crtc_state); |
| } |
| |
| if (!transcoder_is_dsi(cpu_transcoder)) |
| hsw_configure_cpu_transcoder(new_crtc_state); |
| |
| for_each_intel_crtc_in_pipe_mask_reverse(&dev_priv->drm, pipe_crtc, |
| intel_crtc_joined_pipe_mask(new_crtc_state)) { |
| const struct intel_crtc_state *pipe_crtc_state = |
| intel_atomic_get_new_crtc_state(state, pipe_crtc); |
| |
| pipe_crtc->active = true; |
| |
| if (glk_need_scaler_clock_gating_wa(pipe_crtc_state)) |
| glk_pipe_scaler_clock_gating_wa(pipe_crtc, true); |
| |
| if (DISPLAY_VER(dev_priv) >= 9) |
| skl_pfit_enable(pipe_crtc_state); |
| else |
| ilk_pfit_enable(pipe_crtc_state); |
| |
| /* |
| * On ILK+ LUT must be loaded before the pipe is running but with |
| * clocks enabled |
| */ |
| intel_color_load_luts(pipe_crtc_state); |
| intel_color_commit_noarm(pipe_crtc_state); |
| intel_color_commit_arm(pipe_crtc_state); |
| /* update DSPCNTR to configure gamma/csc for pipe bottom color */ |
| if (DISPLAY_VER(dev_priv) < 9) |
| intel_disable_primary_plane(pipe_crtc_state); |
| |
| hsw_set_linetime_wm(pipe_crtc_state); |
| |
| if (DISPLAY_VER(dev_priv) >= 11) |
| icl_set_pipe_chicken(pipe_crtc_state); |
| |
| intel_initial_watermarks(state, pipe_crtc); |
| } |
| |
| intel_encoders_enable(state, crtc); |
| |
| for_each_intel_crtc_in_pipe_mask_reverse(&dev_priv->drm, pipe_crtc, |
| intel_crtc_joined_pipe_mask(new_crtc_state)) { |
| const struct intel_crtc_state *pipe_crtc_state = |
| intel_atomic_get_new_crtc_state(state, pipe_crtc); |
| enum pipe hsw_workaround_pipe; |
| |
| if (glk_need_scaler_clock_gating_wa(pipe_crtc_state)) { |
| intel_crtc_wait_for_next_vblank(pipe_crtc); |
| glk_pipe_scaler_clock_gating_wa(pipe_crtc, false); |
| } |
| |
| /* |
| * If we change the relative order between pipe/planes |
| * enabling, we need to change the workaround. |
| */ |
| hsw_workaround_pipe = pipe_crtc_state->hsw_workaround_pipe; |
| if (IS_HASWELL(dev_priv) && hsw_workaround_pipe != INVALID_PIPE) { |
| struct intel_crtc *wa_crtc = |
| intel_crtc_for_pipe(dev_priv, hsw_workaround_pipe); |
| |
| intel_crtc_wait_for_next_vblank(wa_crtc); |
| intel_crtc_wait_for_next_vblank(wa_crtc); |
| } |
| } |
| } |
| |
| void ilk_pfit_disable(const struct intel_crtc_state *old_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| /* To avoid upsetting the power well on haswell only disable the pfit if |
| * it's in use. The hw state code will make sure we get this right. */ |
| if (!old_crtc_state->pch_pfit.enabled) |
| return; |
| |
| intel_de_write_fw(dev_priv, PF_CTL(pipe), 0); |
| intel_de_write_fw(dev_priv, PF_WIN_POS(pipe), 0); |
| intel_de_write_fw(dev_priv, PF_WIN_SZ(pipe), 0); |
| } |
| |
| static void ilk_crtc_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| /* |
| * Sometimes spurious CPU pipe underruns happen when the |
| * pipe is already disabled, but FDI RX/TX is still enabled. |
| * Happens at least with VGA+HDMI cloning. Suppress them. |
| */ |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false); |
| intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false); |
| |
| intel_encoders_disable(state, crtc); |
| |
| intel_crtc_vblank_off(old_crtc_state); |
| |
| intel_disable_transcoder(old_crtc_state); |
| |
| ilk_pfit_disable(old_crtc_state); |
| |
| if (old_crtc_state->has_pch_encoder) |
| ilk_pch_disable(state, crtc); |
| |
| intel_encoders_post_disable(state, crtc); |
| |
| if (old_crtc_state->has_pch_encoder) |
| ilk_pch_post_disable(state, crtc); |
| |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); |
| intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true); |
| |
| intel_disable_shared_dpll(old_crtc_state); |
| } |
| |
| static void hsw_crtc_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| struct intel_crtc *pipe_crtc; |
| |
| /* |
| * FIXME collapse everything to one hook. |
| * Need care with mst->ddi interactions. |
| */ |
| intel_encoders_disable(state, crtc); |
| intel_encoders_post_disable(state, crtc); |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, pipe_crtc, |
| intel_crtc_joined_pipe_mask(old_crtc_state)) { |
| const struct intel_crtc_state *old_pipe_crtc_state = |
| intel_atomic_get_old_crtc_state(state, pipe_crtc); |
| |
| intel_disable_shared_dpll(old_pipe_crtc_state); |
| } |
| |
| intel_encoders_post_pll_disable(state, crtc); |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, pipe_crtc, |
| intel_crtc_joined_pipe_mask(old_crtc_state)) |
| intel_dmc_disable_pipe(i915, pipe_crtc->pipe); |
| } |
| |
| static void i9xx_pfit_enable(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (!crtc_state->gmch_pfit.control) |
| return; |
| |
| /* |
| * The panel fitter should only be adjusted whilst the pipe is disabled, |
| * according to register description and PRM. |
| */ |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, PFIT_CONTROL(dev_priv)) & PFIT_ENABLE); |
| assert_transcoder_disabled(dev_priv, crtc_state->cpu_transcoder); |
| |
| intel_de_write(dev_priv, PFIT_PGM_RATIOS(dev_priv), |
| crtc_state->gmch_pfit.pgm_ratios); |
| intel_de_write(dev_priv, PFIT_CONTROL(dev_priv), |
| crtc_state->gmch_pfit.control); |
| |
| /* Border color in case we don't scale up to the full screen. Black by |
| * default, change to something else for debugging. */ |
| intel_de_write(dev_priv, BCLRPAT(dev_priv, crtc->pipe), 0); |
| } |
| |
| /* Prefer intel_encoder_is_combo() */ |
| bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy) |
| { |
| if (phy == PHY_NONE) |
| return false; |
| else if (IS_ALDERLAKE_S(dev_priv)) |
| return phy <= PHY_E; |
| else if (IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv)) |
| return phy <= PHY_D; |
| else if (IS_JASPERLAKE(dev_priv) || IS_ELKHARTLAKE(dev_priv)) |
| return phy <= PHY_C; |
| else if (IS_ALDERLAKE_P(dev_priv) || IS_DISPLAY_VER(dev_priv, 11, 12)) |
| return phy <= PHY_B; |
| else |
| /* |
| * DG2 outputs labelled as "combo PHY" in the bspec use |
| * SNPS PHYs with completely different programming, |
| * hence we always return false here. |
| */ |
| return false; |
| } |
| |
| /* Prefer intel_encoder_is_tc() */ |
| bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy) |
| { |
| /* |
| * Discrete GPU phy's are not attached to FIA's to support TC |
| * subsystem Legacy or non-legacy, and only support native DP/HDMI |
| */ |
| if (IS_DGFX(dev_priv)) |
| return false; |
| |
| if (DISPLAY_VER(dev_priv) >= 13) |
| return phy >= PHY_F && phy <= PHY_I; |
| else if (IS_TIGERLAKE(dev_priv)) |
| return phy >= PHY_D && phy <= PHY_I; |
| else if (IS_ICELAKE(dev_priv)) |
| return phy >= PHY_C && phy <= PHY_F; |
| |
| return false; |
| } |
| |
| /* Prefer intel_encoder_is_snps() */ |
| bool intel_phy_is_snps(struct drm_i915_private *dev_priv, enum phy phy) |
| { |
| /* |
| * For DG2, and for DG2 only, all four "combo" ports and the TC1 port |
| * (PHY E) use Synopsis PHYs. See intel_phy_is_tc(). |
| */ |
| return IS_DG2(dev_priv) && phy > PHY_NONE && phy <= PHY_E; |
| } |
| |
| /* Prefer intel_encoder_to_phy() */ |
| enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port) |
| { |
| if (DISPLAY_VER(i915) >= 13 && port >= PORT_D_XELPD) |
| return PHY_D + port - PORT_D_XELPD; |
| else if (DISPLAY_VER(i915) >= 13 && port >= PORT_TC1) |
| return PHY_F + port - PORT_TC1; |
| else if (IS_ALDERLAKE_S(i915) && port >= PORT_TC1) |
| return PHY_B + port - PORT_TC1; |
| else if ((IS_DG1(i915) || IS_ROCKETLAKE(i915)) && port >= PORT_TC1) |
| return PHY_C + port - PORT_TC1; |
| else if ((IS_JASPERLAKE(i915) || IS_ELKHARTLAKE(i915)) && |
| port == PORT_D) |
| return PHY_A; |
| |
| return PHY_A + port - PORT_A; |
| } |
| |
| /* Prefer intel_encoder_to_tc() */ |
| enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv, enum port port) |
| { |
| if (!intel_phy_is_tc(dev_priv, intel_port_to_phy(dev_priv, port))) |
| return TC_PORT_NONE; |
| |
| if (DISPLAY_VER(dev_priv) >= 12) |
| return TC_PORT_1 + port - PORT_TC1; |
| else |
| return TC_PORT_1 + port - PORT_C; |
| } |
| |
| enum phy intel_encoder_to_phy(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| |
| return intel_port_to_phy(i915, encoder->port); |
| } |
| |
| bool intel_encoder_is_combo(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| |
| return intel_phy_is_combo(i915, intel_encoder_to_phy(encoder)); |
| } |
| |
| bool intel_encoder_is_snps(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| |
| return intel_phy_is_snps(i915, intel_encoder_to_phy(encoder)); |
| } |
| |
| bool intel_encoder_is_tc(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| |
| return intel_phy_is_tc(i915, intel_encoder_to_phy(encoder)); |
| } |
| |
| enum tc_port intel_encoder_to_tc(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| |
| return intel_port_to_tc(i915, encoder->port); |
| } |
| |
| enum intel_display_power_domain |
| intel_aux_power_domain(struct intel_digital_port *dig_port) |
| { |
| struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); |
| |
| if (intel_tc_port_in_tbt_alt_mode(dig_port)) |
| return intel_display_power_tbt_aux_domain(i915, dig_port->aux_ch); |
| |
| return intel_display_power_legacy_aux_domain(i915, dig_port->aux_ch); |
| } |
| |
| static void get_crtc_power_domains(struct intel_crtc_state *crtc_state, |
| struct intel_power_domain_mask *mask) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| struct drm_encoder *encoder; |
| enum pipe pipe = crtc->pipe; |
| |
| bitmap_zero(mask->bits, POWER_DOMAIN_NUM); |
| |
| if (!crtc_state->hw.active) |
| return; |
| |
| set_bit(POWER_DOMAIN_PIPE(pipe), mask->bits); |
| set_bit(POWER_DOMAIN_TRANSCODER(cpu_transcoder), mask->bits); |
| if (crtc_state->pch_pfit.enabled || |
| crtc_state->pch_pfit.force_thru) |
| set_bit(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe), mask->bits); |
| |
| drm_for_each_encoder_mask(encoder, &dev_priv->drm, |
| crtc_state->uapi.encoder_mask) { |
| struct intel_encoder *intel_encoder = to_intel_encoder(encoder); |
| |
| set_bit(intel_encoder->power_domain, mask->bits); |
| } |
| |
| if (HAS_DDI(dev_priv) && crtc_state->has_audio) |
| set_bit(POWER_DOMAIN_AUDIO_MMIO, mask->bits); |
| |
| if (crtc_state->shared_dpll) |
| set_bit(POWER_DOMAIN_DISPLAY_CORE, mask->bits); |
| |
| if (crtc_state->dsc.compression_enable) |
| set_bit(intel_dsc_power_domain(crtc, cpu_transcoder), mask->bits); |
| } |
| |
| void intel_modeset_get_crtc_power_domains(struct intel_crtc_state *crtc_state, |
| struct intel_power_domain_mask *old_domains) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum intel_display_power_domain domain; |
| struct intel_power_domain_mask domains, new_domains; |
| |
| get_crtc_power_domains(crtc_state, &domains); |
| |
| bitmap_andnot(new_domains.bits, |
| domains.bits, |
| crtc->enabled_power_domains.mask.bits, |
| POWER_DOMAIN_NUM); |
| bitmap_andnot(old_domains->bits, |
| crtc->enabled_power_domains.mask.bits, |
| domains.bits, |
| POWER_DOMAIN_NUM); |
| |
| for_each_power_domain(domain, &new_domains) |
| intel_display_power_get_in_set(dev_priv, |
| &crtc->enabled_power_domains, |
| domain); |
| } |
| |
| void intel_modeset_put_crtc_power_domains(struct intel_crtc *crtc, |
| struct intel_power_domain_mask *domains) |
| { |
| intel_display_power_put_mask_in_set(to_i915(crtc->base.dev), |
| &crtc->enabled_power_domains, |
| domains); |
| } |
| |
| static void i9xx_configure_cpu_transcoder(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| |
| if (intel_crtc_has_dp_encoder(crtc_state)) { |
| intel_cpu_transcoder_set_m1_n1(crtc, cpu_transcoder, |
| &crtc_state->dp_m_n); |
| intel_cpu_transcoder_set_m2_n2(crtc, cpu_transcoder, |
| &crtc_state->dp_m2_n2); |
| } |
| |
| intel_set_transcoder_timings(crtc_state); |
| |
| i9xx_set_pipeconf(crtc_state); |
| } |
| |
| static void valleyview_crtc_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| if (drm_WARN_ON(&dev_priv->drm, crtc->active)) |
| return; |
| |
| i9xx_configure_cpu_transcoder(new_crtc_state); |
| |
| intel_set_pipe_src_size(new_crtc_state); |
| |
| intel_de_write(dev_priv, VLV_PIPE_MSA_MISC(pipe), 0); |
| |
| if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B) { |
| intel_de_write(dev_priv, CHV_BLEND(dev_priv, pipe), |
| CHV_BLEND_LEGACY); |
| intel_de_write(dev_priv, CHV_CANVAS(dev_priv, pipe), 0); |
| } |
| |
| crtc->active = true; |
| |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); |
| |
| intel_encoders_pre_pll_enable(state, crtc); |
| |
| if (IS_CHERRYVIEW(dev_priv)) |
| chv_enable_pll(new_crtc_state); |
| else |
| vlv_enable_pll(new_crtc_state); |
| |
| intel_encoders_pre_enable(state, crtc); |
| |
| i9xx_pfit_enable(new_crtc_state); |
| |
| intel_color_load_luts(new_crtc_state); |
| intel_color_commit_noarm(new_crtc_state); |
| intel_color_commit_arm(new_crtc_state); |
| /* update DSPCNTR to configure gamma for pipe bottom color */ |
| intel_disable_primary_plane(new_crtc_state); |
| |
| intel_initial_watermarks(state, crtc); |
| intel_enable_transcoder(new_crtc_state); |
| |
| intel_crtc_vblank_on(new_crtc_state); |
| |
| intel_encoders_enable(state, crtc); |
| } |
| |
| static void i9xx_crtc_enable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| if (drm_WARN_ON(&dev_priv->drm, crtc->active)) |
| return; |
| |
| i9xx_configure_cpu_transcoder(new_crtc_state); |
| |
| intel_set_pipe_src_size(new_crtc_state); |
| |
| crtc->active = true; |
| |
| if (DISPLAY_VER(dev_priv) != 2) |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); |
| |
| intel_encoders_pre_enable(state, crtc); |
| |
| i9xx_enable_pll(new_crtc_state); |
| |
| i9xx_pfit_enable(new_crtc_state); |
| |
| intel_color_load_luts(new_crtc_state); |
| intel_color_commit_noarm(new_crtc_state); |
| intel_color_commit_arm(new_crtc_state); |
| /* update DSPCNTR to configure gamma for pipe bottom color */ |
| intel_disable_primary_plane(new_crtc_state); |
| |
| if (!intel_initial_watermarks(state, crtc)) |
| intel_update_watermarks(dev_priv); |
| intel_enable_transcoder(new_crtc_state); |
| |
| intel_crtc_vblank_on(new_crtc_state); |
| |
| intel_encoders_enable(state, crtc); |
| |
| /* prevents spurious underruns */ |
| if (DISPLAY_VER(dev_priv) == 2) |
| intel_crtc_wait_for_next_vblank(crtc); |
| } |
| |
| static void i9xx_pfit_disable(const struct intel_crtc_state *old_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (!old_crtc_state->gmch_pfit.control) |
| return; |
| |
| assert_transcoder_disabled(dev_priv, old_crtc_state->cpu_transcoder); |
| |
| drm_dbg_kms(&dev_priv->drm, "disabling pfit, current: 0x%08x\n", |
| intel_de_read(dev_priv, PFIT_CONTROL(dev_priv))); |
| intel_de_write(dev_priv, PFIT_CONTROL(dev_priv), 0); |
| } |
| |
| static void i9xx_crtc_disable(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| /* |
| * On gen2 planes are double buffered but the pipe isn't, so we must |
| * wait for planes to fully turn off before disabling the pipe. |
| */ |
| if (DISPLAY_VER(dev_priv) == 2) |
| intel_crtc_wait_for_next_vblank(crtc); |
| |
| intel_encoders_disable(state, crtc); |
| |
| intel_crtc_vblank_off(old_crtc_state); |
| |
| intel_disable_transcoder(old_crtc_state); |
| |
| i9xx_pfit_disable(old_crtc_state); |
| |
| intel_encoders_post_disable(state, crtc); |
| |
| if (!intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_DSI)) { |
| if (IS_CHERRYVIEW(dev_priv)) |
| chv_disable_pll(dev_priv, pipe); |
| else if (IS_VALLEYVIEW(dev_priv)) |
| vlv_disable_pll(dev_priv, pipe); |
| else |
| i9xx_disable_pll(old_crtc_state); |
| } |
| |
| intel_encoders_post_pll_disable(state, crtc); |
| |
| if (DISPLAY_VER(dev_priv) != 2) |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false); |
| |
| if (!dev_priv->display.funcs.wm->initial_watermarks) |
| intel_update_watermarks(dev_priv); |
| |
| /* clock the pipe down to 640x480@60 to potentially save power */ |
| if (IS_I830(dev_priv)) |
| i830_enable_pipe(dev_priv, pipe); |
| } |
| |
| void intel_encoder_destroy(struct drm_encoder *encoder) |
| { |
| struct intel_encoder *intel_encoder = to_intel_encoder(encoder); |
| |
| drm_encoder_cleanup(encoder); |
| kfree(intel_encoder); |
| } |
| |
| static bool intel_crtc_supports_double_wide(const struct intel_crtc *crtc) |
| { |
| const struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| /* GDG double wide on either pipe, otherwise pipe A only */ |
| return DISPLAY_VER(dev_priv) < 4 && |
| (crtc->pipe == PIPE_A || IS_I915G(dev_priv)); |
| } |
| |
| static u32 ilk_pipe_pixel_rate(const struct intel_crtc_state *crtc_state) |
| { |
| u32 pixel_rate = crtc_state->hw.pipe_mode.crtc_clock; |
| struct drm_rect src; |
| |
| /* |
| * We only use IF-ID interlacing. If we ever use |
| * PF-ID we'll need to adjust the pixel_rate here. |
| */ |
| |
| if (!crtc_state->pch_pfit.enabled) |
| return pixel_rate; |
| |
| drm_rect_init(&src, 0, 0, |
| drm_rect_width(&crtc_state->pipe_src) << 16, |
| drm_rect_height(&crtc_state->pipe_src) << 16); |
| |
| return intel_adjusted_rate(&src, &crtc_state->pch_pfit.dst, |
| pixel_rate); |
| } |
| |
| static void intel_mode_from_crtc_timings(struct drm_display_mode *mode, |
| const struct drm_display_mode *timings) |
| { |
| mode->hdisplay = timings->crtc_hdisplay; |
| mode->htotal = timings->crtc_htotal; |
| mode->hsync_start = timings->crtc_hsync_start; |
| mode->hsync_end = timings->crtc_hsync_end; |
| |
| mode->vdisplay = timings->crtc_vdisplay; |
| mode->vtotal = timings->crtc_vtotal; |
| mode->vsync_start = timings->crtc_vsync_start; |
| mode->vsync_end = timings->crtc_vsync_end; |
| |
| mode->flags = timings->flags; |
| mode->type = DRM_MODE_TYPE_DRIVER; |
| |
| mode->clock = timings->crtc_clock; |
| |
| drm_mode_set_name(mode); |
| } |
| |
| static void intel_crtc_compute_pixel_rate(struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| |
| if (HAS_GMCH(dev_priv)) |
| /* FIXME calculate proper pipe pixel rate for GMCH pfit */ |
| crtc_state->pixel_rate = |
| crtc_state->hw.pipe_mode.crtc_clock; |
| else |
| crtc_state->pixel_rate = |
| ilk_pipe_pixel_rate(crtc_state); |
| } |
| |
| static void intel_joiner_adjust_timings(const struct intel_crtc_state *crtc_state, |
| struct drm_display_mode *mode) |
| { |
| int num_pipes = intel_joiner_num_pipes(crtc_state); |
| |
| if (num_pipes < 2) |
| return; |
| |
| mode->crtc_clock /= num_pipes; |
| mode->crtc_hdisplay /= num_pipes; |
| mode->crtc_hblank_start /= num_pipes; |
| mode->crtc_hblank_end /= num_pipes; |
| mode->crtc_hsync_start /= num_pipes; |
| mode->crtc_hsync_end /= num_pipes; |
| mode->crtc_htotal /= num_pipes; |
| } |
| |
| static void intel_splitter_adjust_timings(const struct intel_crtc_state *crtc_state, |
| struct drm_display_mode *mode) |
| { |
| int overlap = crtc_state->splitter.pixel_overlap; |
| int n = crtc_state->splitter.link_count; |
| |
| if (!crtc_state->splitter.enable) |
| return; |
| |
| /* |
| * eDP MSO uses segment timings from EDID for transcoder |
| * timings, but full mode for everything else. |
| * |
| * h_full = (h_segment - pixel_overlap) * link_count |
| */ |
| mode->crtc_hdisplay = (mode->crtc_hdisplay - overlap) * n; |
| mode->crtc_hblank_start = (mode->crtc_hblank_start - overlap) * n; |
| mode->crtc_hblank_end = (mode->crtc_hblank_end - overlap) * n; |
| mode->crtc_hsync_start = (mode->crtc_hsync_start - overlap) * n; |
| mode->crtc_hsync_end = (mode->crtc_hsync_end - overlap) * n; |
| mode->crtc_htotal = (mode->crtc_htotal - overlap) * n; |
| mode->crtc_clock *= n; |
| } |
| |
| static void intel_crtc_readout_derived_state(struct intel_crtc_state *crtc_state) |
| { |
| struct drm_display_mode *mode = &crtc_state->hw.mode; |
| struct drm_display_mode *pipe_mode = &crtc_state->hw.pipe_mode; |
| struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; |
| |
| /* |
| * Start with the adjusted_mode crtc timings, which |
| * have been filled with the transcoder timings. |
| */ |
| drm_mode_copy(pipe_mode, adjusted_mode); |
| |
| /* Expand MSO per-segment transcoder timings to full */ |
| intel_splitter_adjust_timings(crtc_state, pipe_mode); |
| |
| /* |
| * We want the full numbers in adjusted_mode normal timings, |
| * adjusted_mode crtc timings are left with the raw transcoder |
| * timings. |
| */ |
| intel_mode_from_crtc_timings(adjusted_mode, pipe_mode); |
| |
| /* Populate the "user" mode with full numbers */ |
| drm_mode_copy(mode, pipe_mode); |
| intel_mode_from_crtc_timings(mode, mode); |
| mode->hdisplay = drm_rect_width(&crtc_state->pipe_src) * |
| (intel_joiner_num_pipes(crtc_state) ?: 1); |
| mode->vdisplay = drm_rect_height(&crtc_state->pipe_src); |
| |
| /* Derive per-pipe timings in case joiner is used */ |
| intel_joiner_adjust_timings(crtc_state, pipe_mode); |
| intel_mode_from_crtc_timings(pipe_mode, pipe_mode); |
| |
| intel_crtc_compute_pixel_rate(crtc_state); |
| } |
| |
| void intel_encoder_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| encoder->get_config(encoder, crtc_state); |
| |
| intel_crtc_readout_derived_state(crtc_state); |
| } |
| |
| static void intel_joiner_compute_pipe_src(struct intel_crtc_state *crtc_state) |
| { |
| int num_pipes = intel_joiner_num_pipes(crtc_state); |
| int width, height; |
| |
| if (num_pipes < 2) |
| return; |
| |
| width = drm_rect_width(&crtc_state->pipe_src); |
| height = drm_rect_height(&crtc_state->pipe_src); |
| |
| drm_rect_init(&crtc_state->pipe_src, 0, 0, |
| width / num_pipes, height); |
| } |
| |
| static int intel_crtc_compute_pipe_src(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| |
| intel_joiner_compute_pipe_src(crtc_state); |
| |
| /* |
| * Pipe horizontal size must be even in: |
| * - DVO ganged mode |
| * - LVDS dual channel mode |
| * - Double wide pipe |
| */ |
| if (drm_rect_width(&crtc_state->pipe_src) & 1) { |
| if (crtc_state->double_wide) { |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] Odd pipe source width not supported with double wide pipe\n", |
| crtc->base.base.id, crtc->base.name); |
| return -EINVAL; |
| } |
| |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) && |
| intel_is_dual_link_lvds(i915)) { |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] Odd pipe source width not supported with dual link LVDS\n", |
| crtc->base.base.id, crtc->base.name); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int intel_crtc_compute_pipe_mode(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; |
| struct drm_display_mode *pipe_mode = &crtc_state->hw.pipe_mode; |
| int clock_limit = i915->display.cdclk.max_dotclk_freq; |
| |
| /* |
| * Start with the adjusted_mode crtc timings, which |
| * have been filled with the transcoder timings. |
| */ |
| drm_mode_copy(pipe_mode, adjusted_mode); |
| |
| /* Expand MSO per-segment transcoder timings to full */ |
| intel_splitter_adjust_timings(crtc_state, pipe_mode); |
| |
| /* Derive per-pipe timings in case joiner is used */ |
| intel_joiner_adjust_timings(crtc_state, pipe_mode); |
| intel_mode_from_crtc_timings(pipe_mode, pipe_mode); |
| |
| if (DISPLAY_VER(i915) < 4) { |
| clock_limit = i915->display.cdclk.max_cdclk_freq * 9 / 10; |
| |
| /* |
| * Enable double wide mode when the dot clock |
| * is > 90% of the (display) core speed. |
| */ |
| if (intel_crtc_supports_double_wide(crtc) && |
| pipe_mode->crtc_clock > clock_limit) { |
| clock_limit = i915->display.cdclk.max_dotclk_freq; |
| crtc_state->double_wide = true; |
| } |
| } |
| |
| if (pipe_mode->crtc_clock > clock_limit) { |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n", |
| crtc->base.base.id, crtc->base.name, |
| pipe_mode->crtc_clock, clock_limit, |
| str_yes_no(crtc_state->double_wide)); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int intel_crtc_compute_config(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| int ret; |
| |
| ret = intel_dpll_crtc_compute_clock(state, crtc); |
| if (ret) |
| return ret; |
| |
| ret = intel_crtc_compute_pipe_src(crtc_state); |
| if (ret) |
| return ret; |
| |
| ret = intel_crtc_compute_pipe_mode(crtc_state); |
| if (ret) |
| return ret; |
| |
| intel_crtc_compute_pixel_rate(crtc_state); |
| |
| if (crtc_state->has_pch_encoder) |
| return ilk_fdi_compute_config(crtc, crtc_state); |
| |
| return 0; |
| } |
| |
| static void |
| intel_reduce_m_n_ratio(u32 *num, u32 *den) |
| { |
| while (*num > DATA_LINK_M_N_MASK || |
| *den > DATA_LINK_M_N_MASK) { |
| *num >>= 1; |
| *den >>= 1; |
| } |
| } |
| |
| static void compute_m_n(u32 *ret_m, u32 *ret_n, |
| u32 m, u32 n, u32 constant_n) |
| { |
| if (constant_n) |
| *ret_n = constant_n; |
| else |
| *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX); |
| |
| *ret_m = div_u64(mul_u32_u32(m, *ret_n), n); |
| intel_reduce_m_n_ratio(ret_m, ret_n); |
| } |
| |
| void |
| intel_link_compute_m_n(u16 bits_per_pixel_x16, int nlanes, |
| int pixel_clock, int link_clock, |
| int bw_overhead, |
| struct intel_link_m_n *m_n) |
| { |
| u32 link_symbol_clock = intel_dp_link_symbol_clock(link_clock); |
| u32 data_m = intel_dp_effective_data_rate(pixel_clock, bits_per_pixel_x16, |
| bw_overhead); |
| u32 data_n = drm_dp_max_dprx_data_rate(link_clock, nlanes); |
| |
| /* |
| * Windows/BIOS uses fixed M/N values always. Follow suit. |
| * |
| * Also several DP dongles in particular seem to be fussy |
| * about too large link M/N values. Presumably the 20bit |
| * value used by Windows/BIOS is acceptable to everyone. |
| */ |
| m_n->tu = 64; |
| compute_m_n(&m_n->data_m, &m_n->data_n, |
| data_m, data_n, |
| 0x8000000); |
| |
| compute_m_n(&m_n->link_m, &m_n->link_n, |
| pixel_clock, link_symbol_clock, |
| 0x80000); |
| } |
| |
| void intel_panel_sanitize_ssc(struct drm_i915_private *dev_priv) |
| { |
| /* |
| * There may be no VBT; and if the BIOS enabled SSC we can |
| * just keep using it to avoid unnecessary flicker. Whereas if the |
| * BIOS isn't using it, don't assume it will work even if the VBT |
| * indicates as much. |
| */ |
| if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)) { |
| bool bios_lvds_use_ssc = intel_de_read(dev_priv, |
| PCH_DREF_CONTROL) & |
| DREF_SSC1_ENABLE; |
| |
| if (dev_priv->display.vbt.lvds_use_ssc != bios_lvds_use_ssc) { |
| drm_dbg_kms(&dev_priv->drm, |
| "SSC %s by BIOS, overriding VBT which says %s\n", |
| str_enabled_disabled(bios_lvds_use_ssc), |
| str_enabled_disabled(dev_priv->display.vbt.lvds_use_ssc)); |
| dev_priv->display.vbt.lvds_use_ssc = bios_lvds_use_ssc; |
| } |
| } |
| } |
| |
| void intel_zero_m_n(struct intel_link_m_n *m_n) |
| { |
| /* corresponds to 0 register value */ |
| memset(m_n, 0, sizeof(*m_n)); |
| m_n->tu = 1; |
| } |
| |
| void intel_set_m_n(struct drm_i915_private *i915, |
| const struct intel_link_m_n *m_n, |
| i915_reg_t data_m_reg, i915_reg_t data_n_reg, |
| i915_reg_t link_m_reg, i915_reg_t link_n_reg) |
| { |
| intel_de_write(i915, data_m_reg, TU_SIZE(m_n->tu) | m_n->data_m); |
| intel_de_write(i915, data_n_reg, m_n->data_n); |
| intel_de_write(i915, link_m_reg, m_n->link_m); |
| /* |
| * On BDW+ writing LINK_N arms the double buffered update |
| * of all the M/N registers, so it must be written last. |
| */ |
| intel_de_write(i915, link_n_reg, m_n->link_n); |
| } |
| |
| bool intel_cpu_transcoder_has_m2_n2(struct drm_i915_private *dev_priv, |
| enum transcoder transcoder) |
| { |
| if (IS_HASWELL(dev_priv)) |
| return transcoder == TRANSCODER_EDP; |
| |
| return IS_DISPLAY_VER(dev_priv, 5, 7) || IS_CHERRYVIEW(dev_priv); |
| } |
| |
| void intel_cpu_transcoder_set_m1_n1(struct intel_crtc *crtc, |
| enum transcoder transcoder, |
| const struct intel_link_m_n *m_n) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| if (DISPLAY_VER(dev_priv) >= 5) |
| intel_set_m_n(dev_priv, m_n, |
| PIPE_DATA_M1(dev_priv, transcoder), |
| PIPE_DATA_N1(dev_priv, transcoder), |
| PIPE_LINK_M1(dev_priv, transcoder), |
| PIPE_LINK_N1(dev_priv, transcoder)); |
| else |
| intel_set_m_n(dev_priv, m_n, |
| PIPE_DATA_M_G4X(pipe), PIPE_DATA_N_G4X(pipe), |
| PIPE_LINK_M_G4X(pipe), PIPE_LINK_N_G4X(pipe)); |
| } |
| |
| void intel_cpu_transcoder_set_m2_n2(struct intel_crtc *crtc, |
| enum transcoder transcoder, |
| const struct intel_link_m_n *m_n) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (!intel_cpu_transcoder_has_m2_n2(dev_priv, transcoder)) |
| return; |
| |
| intel_set_m_n(dev_priv, m_n, |
| PIPE_DATA_M2(dev_priv, transcoder), |
| PIPE_DATA_N2(dev_priv, transcoder), |
| PIPE_LINK_M2(dev_priv, transcoder), |
| PIPE_LINK_N2(dev_priv, transcoder)); |
| } |
| |
| static void intel_set_transcoder_timings(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; |
| u32 crtc_vdisplay, crtc_vtotal, crtc_vblank_start, crtc_vblank_end; |
| int vsyncshift = 0; |
| |
| /* We need to be careful not to changed the adjusted mode, for otherwise |
| * the hw state checker will get angry at the mismatch. */ |
| crtc_vdisplay = adjusted_mode->crtc_vdisplay; |
| crtc_vtotal = adjusted_mode->crtc_vtotal; |
| crtc_vblank_start = adjusted_mode->crtc_vblank_start; |
| crtc_vblank_end = adjusted_mode->crtc_vblank_end; |
| |
| if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { |
| /* the chip adds 2 halflines automatically */ |
| crtc_vtotal -= 1; |
| crtc_vblank_end -= 1; |
| |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) |
| vsyncshift = (adjusted_mode->crtc_htotal - 1) / 2; |
| else |
| vsyncshift = adjusted_mode->crtc_hsync_start - |
| adjusted_mode->crtc_htotal / 2; |
| if (vsyncshift < 0) |
| vsyncshift += adjusted_mode->crtc_htotal; |
| } |
| |
| /* |
| * VBLANK_START no longer works on ADL+, instead we must use |
| * TRANS_SET_CONTEXT_LATENCY to configure the pipe vblank start. |
| */ |
| if (DISPLAY_VER(dev_priv) >= 13) { |
| intel_de_write(dev_priv, |
| TRANS_SET_CONTEXT_LATENCY(dev_priv, cpu_transcoder), |
| crtc_vblank_start - crtc_vdisplay); |
| |
| /* |
| * VBLANK_START not used by hw, just clear it |
| * to make it stand out in register dumps. |
| */ |
| crtc_vblank_start = 1; |
| } |
| |
| if (DISPLAY_VER(dev_priv) >= 4) |
| intel_de_write(dev_priv, |
| TRANS_VSYNCSHIFT(dev_priv, cpu_transcoder), |
| vsyncshift); |
| |
| intel_de_write(dev_priv, TRANS_HTOTAL(dev_priv, cpu_transcoder), |
| HACTIVE(adjusted_mode->crtc_hdisplay - 1) | |
| HTOTAL(adjusted_mode->crtc_htotal - 1)); |
| intel_de_write(dev_priv, TRANS_HBLANK(dev_priv, cpu_transcoder), |
| HBLANK_START(adjusted_mode->crtc_hblank_start - 1) | |
| HBLANK_END(adjusted_mode->crtc_hblank_end - 1)); |
| intel_de_write(dev_priv, TRANS_HSYNC(dev_priv, cpu_transcoder), |
| HSYNC_START(adjusted_mode->crtc_hsync_start - 1) | |
| HSYNC_END(adjusted_mode->crtc_hsync_end - 1)); |
| |
| intel_de_write(dev_priv, TRANS_VTOTAL(dev_priv, cpu_transcoder), |
| VACTIVE(crtc_vdisplay - 1) | |
| VTOTAL(crtc_vtotal - 1)); |
| intel_de_write(dev_priv, TRANS_VBLANK(dev_priv, cpu_transcoder), |
| VBLANK_START(crtc_vblank_start - 1) | |
| VBLANK_END(crtc_vblank_end - 1)); |
| intel_de_write(dev_priv, TRANS_VSYNC(dev_priv, cpu_transcoder), |
| VSYNC_START(adjusted_mode->crtc_vsync_start - 1) | |
| VSYNC_END(adjusted_mode->crtc_vsync_end - 1)); |
| |
| /* Workaround: when the EDP input selection is B, the VTOTAL_B must be |
| * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is |
| * documented on the DDI_FUNC_CTL register description, EDP Input Select |
| * bits. */ |
| if (IS_HASWELL(dev_priv) && cpu_transcoder == TRANSCODER_EDP && |
| (pipe == PIPE_B || pipe == PIPE_C)) |
| intel_de_write(dev_priv, TRANS_VTOTAL(dev_priv, pipe), |
| VACTIVE(crtc_vdisplay - 1) | |
| VTOTAL(crtc_vtotal - 1)); |
| } |
| |
| static void intel_set_transcoder_timings_lrr(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; |
| u32 crtc_vdisplay, crtc_vtotal, crtc_vblank_start, crtc_vblank_end; |
| |
| crtc_vdisplay = adjusted_mode->crtc_vdisplay; |
| crtc_vtotal = adjusted_mode->crtc_vtotal; |
| crtc_vblank_start = adjusted_mode->crtc_vblank_start; |
| crtc_vblank_end = adjusted_mode->crtc_vblank_end; |
| |
| drm_WARN_ON(&dev_priv->drm, adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE); |
| |
| /* |
| * The hardware actually ignores TRANS_VBLANK.VBLANK_END in DP mode. |
| * But let's write it anyway to keep the state checker happy. |
| */ |
| intel_de_write(dev_priv, TRANS_VBLANK(dev_priv, cpu_transcoder), |
| VBLANK_START(crtc_vblank_start - 1) | |
| VBLANK_END(crtc_vblank_end - 1)); |
| /* |
| * The double buffer latch point for TRANS_VTOTAL |
| * is the transcoder's undelayed vblank. |
| */ |
| intel_de_write(dev_priv, TRANS_VTOTAL(dev_priv, cpu_transcoder), |
| VACTIVE(crtc_vdisplay - 1) | |
| VTOTAL(crtc_vtotal - 1)); |
| } |
| |
| static void intel_set_pipe_src_size(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| int width = drm_rect_width(&crtc_state->pipe_src); |
| int height = drm_rect_height(&crtc_state->pipe_src); |
| enum pipe pipe = crtc->pipe; |
| |
| /* pipesrc controls the size that is scaled from, which should |
| * always be the user's requested size. |
| */ |
| intel_de_write(dev_priv, PIPESRC(dev_priv, pipe), |
| PIPESRC_WIDTH(width - 1) | PIPESRC_HEIGHT(height - 1)); |
| } |
| |
| static bool intel_pipe_is_interlaced(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| |
| if (DISPLAY_VER(dev_priv) == 2) |
| return false; |
| |
| if (DISPLAY_VER(dev_priv) >= 9 || |
| IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) |
| return intel_de_read(dev_priv, |
| TRANSCONF(dev_priv, cpu_transcoder)) & TRANSCONF_INTERLACE_MASK_HSW; |
| else |
| return intel_de_read(dev_priv, |
| TRANSCONF(dev_priv, cpu_transcoder)) & TRANSCONF_INTERLACE_MASK; |
| } |
| |
| static void intel_get_transcoder_timings(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; |
| struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode; |
| u32 tmp; |
| |
| tmp = intel_de_read(dev_priv, TRANS_HTOTAL(dev_priv, cpu_transcoder)); |
| adjusted_mode->crtc_hdisplay = REG_FIELD_GET(HACTIVE_MASK, tmp) + 1; |
| adjusted_mode->crtc_htotal = REG_FIELD_GET(HTOTAL_MASK, tmp) + 1; |
| |
| if (!transcoder_is_dsi(cpu_transcoder)) { |
| tmp = intel_de_read(dev_priv, |
| TRANS_HBLANK(dev_priv, cpu_transcoder)); |
| adjusted_mode->crtc_hblank_start = REG_FIELD_GET(HBLANK_START_MASK, tmp) + 1; |
| adjusted_mode->crtc_hblank_end = REG_FIELD_GET(HBLANK_END_MASK, tmp) + 1; |
| } |
| |
| tmp = intel_de_read(dev_priv, TRANS_HSYNC(dev_priv, cpu_transcoder)); |
| adjusted_mode->crtc_hsync_start = REG_FIELD_GET(HSYNC_START_MASK, tmp) + 1; |
| adjusted_mode->crtc_hsync_end = REG_FIELD_GET(HSYNC_END_MASK, tmp) + 1; |
| |
| tmp = intel_de_read(dev_priv, TRANS_VTOTAL(dev_priv, cpu_transcoder)); |
| adjusted_mode->crtc_vdisplay = REG_FIELD_GET(VACTIVE_MASK, tmp) + 1; |
| adjusted_mode->crtc_vtotal = REG_FIELD_GET(VTOTAL_MASK, tmp) + 1; |
| |
| /* FIXME TGL+ DSI transcoders have this! */ |
| if (!transcoder_is_dsi(cpu_transcoder)) { |
| tmp = intel_de_read(dev_priv, |
| TRANS_VBLANK(dev_priv, cpu_transcoder)); |
| adjusted_mode->crtc_vblank_start = REG_FIELD_GET(VBLANK_START_MASK, tmp) + 1; |
| adjusted_mode->crtc_vblank_end = REG_FIELD_GET(VBLANK_END_MASK, tmp) + 1; |
| } |
| tmp = intel_de_read(dev_priv, TRANS_VSYNC(dev_priv, cpu_transcoder)); |
| adjusted_mode->crtc_vsync_start = REG_FIELD_GET(VSYNC_START_MASK, tmp) + 1; |
| adjusted_mode->crtc_vsync_end = REG_FIELD_GET(VSYNC_END_MASK, tmp) + 1; |
| |
| if (intel_pipe_is_interlaced(pipe_config)) { |
| adjusted_mode->flags |= DRM_MODE_FLAG_INTERLACE; |
| adjusted_mode->crtc_vtotal += 1; |
| adjusted_mode->crtc_vblank_end += 1; |
| } |
| |
| if (DISPLAY_VER(dev_priv) >= 13 && !transcoder_is_dsi(cpu_transcoder)) |
| adjusted_mode->crtc_vblank_start = |
| adjusted_mode->crtc_vdisplay + |
| intel_de_read(dev_priv, |
| TRANS_SET_CONTEXT_LATENCY(dev_priv, cpu_transcoder)); |
| } |
| |
| static void intel_joiner_adjust_pipe_src(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| int num_pipes = intel_joiner_num_pipes(crtc_state); |
| enum pipe primary_pipe, pipe = crtc->pipe; |
| int width; |
| |
| if (num_pipes < 2) |
| return; |
| |
| primary_pipe = joiner_primary_pipe(crtc_state); |
| width = drm_rect_width(&crtc_state->pipe_src); |
| |
| drm_rect_translate_to(&crtc_state->pipe_src, |
| (pipe - primary_pipe) * width, 0); |
| } |
| |
| static void intel_get_pipe_src_size(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 tmp; |
| |
| tmp = intel_de_read(dev_priv, PIPESRC(dev_priv, crtc->pipe)); |
| |
| drm_rect_init(&pipe_config->pipe_src, 0, 0, |
| REG_FIELD_GET(PIPESRC_WIDTH_MASK, tmp) + 1, |
| REG_FIELD_GET(PIPESRC_HEIGHT_MASK, tmp) + 1); |
| |
| intel_joiner_adjust_pipe_src(pipe_config); |
| } |
| |
| void i9xx_set_pipeconf(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| u32 val = 0; |
| |
| /* |
| * - We keep both pipes enabled on 830 |
| * - During modeset the pipe is still disabled and must remain so |
| * - During fastset the pipe is already enabled and must remain so |
| */ |
| if (IS_I830(dev_priv) || !intel_crtc_needs_modeset(crtc_state)) |
| val |= TRANSCONF_ENABLE; |
| |
| if (crtc_state->double_wide) |
| val |= TRANSCONF_DOUBLE_WIDE; |
| |
| /* only g4x and later have fancy bpc/dither controls */ |
| if (IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) || |
| IS_CHERRYVIEW(dev_priv)) { |
| /* Bspec claims that we can't use dithering for 30bpp pipes. */ |
| if (crtc_state->dither && crtc_state->pipe_bpp != 30) |
| val |= TRANSCONF_DITHER_EN | |
| TRANSCONF_DITHER_TYPE_SP; |
| |
| switch (crtc_state->pipe_bpp) { |
| default: |
| /* Case prevented by intel_choose_pipe_bpp_dither. */ |
| MISSING_CASE(crtc_state->pipe_bpp); |
| fallthrough; |
| case 18: |
| val |= TRANSCONF_BPC_6; |
| break; |
| case 24: |
| val |= TRANSCONF_BPC_8; |
| break; |
| case 30: |
| val |= TRANSCONF_BPC_10; |
| break; |
| } |
| } |
| |
| if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) { |
| if (DISPLAY_VER(dev_priv) < 4 || |
| intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) |
| val |= TRANSCONF_INTERLACE_W_FIELD_INDICATION; |
| else |
| val |= TRANSCONF_INTERLACE_W_SYNC_SHIFT; |
| } else { |
| val |= TRANSCONF_INTERLACE_PROGRESSIVE; |
| } |
| |
| if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && |
| crtc_state->limited_color_range) |
| val |= TRANSCONF_COLOR_RANGE_SELECT; |
| |
| val |= TRANSCONF_GAMMA_MODE(crtc_state->gamma_mode); |
| |
| if (crtc_state->wgc_enable) |
| val |= TRANSCONF_WGC_ENABLE; |
| |
| val |= TRANSCONF_FRAME_START_DELAY(crtc_state->framestart_delay - 1); |
| |
| intel_de_write(dev_priv, TRANSCONF(dev_priv, cpu_transcoder), val); |
| intel_de_posting_read(dev_priv, TRANSCONF(dev_priv, cpu_transcoder)); |
| } |
| |
| static bool i9xx_has_pfit(struct drm_i915_private *dev_priv) |
| { |
| if (IS_I830(dev_priv)) |
| return false; |
| |
| return DISPLAY_VER(dev_priv) >= 4 || |
| IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv); |
| } |
| |
| static void i9xx_get_pfit_config(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe; |
| u32 tmp; |
| |
| if (!i9xx_has_pfit(dev_priv)) |
| return; |
| |
| tmp = intel_de_read(dev_priv, PFIT_CONTROL(dev_priv)); |
| if (!(tmp & PFIT_ENABLE)) |
| return; |
| |
| /* Check whether the pfit is attached to our pipe. */ |
| if (DISPLAY_VER(dev_priv) >= 4) |
| pipe = REG_FIELD_GET(PFIT_PIPE_MASK, tmp); |
| else |
| pipe = PIPE_B; |
| |
| if (pipe != crtc->pipe) |
| return; |
| |
| crtc_state->gmch_pfit.control = tmp; |
| crtc_state->gmch_pfit.pgm_ratios = |
| intel_de_read(dev_priv, PFIT_PGM_RATIOS(dev_priv)); |
| } |
| |
| static enum intel_output_format |
| bdw_get_pipe_misc_output_format(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| u32 tmp; |
| |
| tmp = intel_de_read(dev_priv, PIPE_MISC(crtc->pipe)); |
| |
| if (tmp & PIPE_MISC_YUV420_ENABLE) { |
| /* We support 4:2:0 in full blend mode only */ |
| drm_WARN_ON(&dev_priv->drm, |
| (tmp & PIPE_MISC_YUV420_MODE_FULL_BLEND) == 0); |
| |
| return INTEL_OUTPUT_FORMAT_YCBCR420; |
| } else if (tmp & PIPE_MISC_OUTPUT_COLORSPACE_YUV) { |
| return INTEL_OUTPUT_FORMAT_YCBCR444; |
| } else { |
| return INTEL_OUTPUT_FORMAT_RGB; |
| } |
| } |
| |
| static bool i9xx_get_pipe_config(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum intel_display_power_domain power_domain; |
| intel_wakeref_t wakeref; |
| u32 tmp; |
| bool ret; |
| |
| power_domain = POWER_DOMAIN_PIPE(crtc->pipe); |
| wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain); |
| if (!wakeref) |
| return false; |
| |
| pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; |
| pipe_config->sink_format = pipe_config->output_format; |
| pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe; |
| pipe_config->shared_dpll = NULL; |
| |
| ret = false; |
| |
| tmp = intel_de_read(dev_priv, |
| TRANSCONF(dev_priv, pipe_config->cpu_transcoder)); |
| if (!(tmp & TRANSCONF_ENABLE)) |
| goto out; |
| |
| if (IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) || |
| IS_CHERRYVIEW(dev_priv)) { |
| switch (tmp & TRANSCONF_BPC_MASK) { |
| case TRANSCONF_BPC_6: |
| pipe_config->pipe_bpp = 18; |
| break; |
| case TRANSCONF_BPC_8: |
| pipe_config->pipe_bpp = 24; |
| break; |
| case TRANSCONF_BPC_10: |
| pipe_config->pipe_bpp = 30; |
| break; |
| default: |
| MISSING_CASE(tmp); |
| break; |
| } |
| } |
| |
| if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && |
| (tmp & TRANSCONF_COLOR_RANGE_SELECT)) |
| pipe_config->limited_color_range = true; |
| |
| pipe_config->gamma_mode = REG_FIELD_GET(TRANSCONF_GAMMA_MODE_MASK_I9XX, tmp); |
| |
| pipe_config->framestart_delay = REG_FIELD_GET(TRANSCONF_FRAME_START_DELAY_MASK, tmp) + 1; |
| |
| if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && |
| (tmp & TRANSCONF_WGC_ENABLE)) |
| pipe_config->wgc_enable = true; |
| |
| intel_color_get_config(pipe_config); |
| |
| if (DISPLAY_VER(dev_priv) < 4) |
| pipe_config->double_wide = tmp & TRANSCONF_DOUBLE_WIDE; |
| |
| intel_get_transcoder_timings(crtc, pipe_config); |
| intel_get_pipe_src_size(crtc, pipe_config); |
| |
| i9xx_get_pfit_config(pipe_config); |
| |
| i9xx_dpll_get_hw_state(crtc, &pipe_config->dpll_hw_state); |
| |
| if (DISPLAY_VER(dev_priv) >= 4) { |
| tmp = pipe_config->dpll_hw_state.i9xx.dpll_md; |
| pipe_config->pixel_multiplier = |
| ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK) |
| >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1; |
| } else if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) || |
| IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) { |
| tmp = pipe_config->dpll_hw_state.i9xx.dpll; |
| pipe_config->pixel_multiplier = |
| ((tmp & SDVO_MULTIPLIER_MASK) |
| >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1; |
| } else { |
| /* Note that on i915G/GM the pixel multiplier is in the sdvo |
| * port and will be fixed up in the encoder->get_config |
| * function. */ |
| pipe_config->pixel_multiplier = 1; |
| } |
| |
| if (IS_CHERRYVIEW(dev_priv)) |
| chv_crtc_clock_get(pipe_config); |
| else if (IS_VALLEYVIEW(dev_priv)) |
| vlv_crtc_clock_get(pipe_config); |
| else |
| i9xx_crtc_clock_get(pipe_config); |
| |
| /* |
| * Normally the dotclock is filled in by the encoder .get_config() |
| * but in case the pipe is enabled w/o any ports we need a sane |
| * default. |
| */ |
| pipe_config->hw.adjusted_mode.crtc_clock = |
| pipe_config->port_clock / pipe_config->pixel_multiplier; |
| |
| ret = true; |
| |
| out: |
| intel_display_power_put(dev_priv, power_domain, wakeref); |
| |
| return ret; |
| } |
| |
| void ilk_set_pipeconf(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| u32 val = 0; |
| |
| /* |
| * - During modeset the pipe is still disabled and must remain so |
| * - During fastset the pipe is already enabled and must remain so |
| */ |
| if (!intel_crtc_needs_modeset(crtc_state)) |
| val |= TRANSCONF_ENABLE; |
| |
| switch (crtc_state->pipe_bpp) { |
| default: |
| /* Case prevented by intel_choose_pipe_bpp_dither. */ |
| MISSING_CASE(crtc_state->pipe_bpp); |
| fallthrough; |
| case 18: |
| val |= TRANSCONF_BPC_6; |
| break; |
| case 24: |
| val |= TRANSCONF_BPC_8; |
| break; |
| case 30: |
| val |= TRANSCONF_BPC_10; |
| break; |
| case 36: |
| val |= TRANSCONF_BPC_12; |
| break; |
| } |
| |
| if (crtc_state->dither) |
| val |= TRANSCONF_DITHER_EN | TRANSCONF_DITHER_TYPE_SP; |
| |
| if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) |
| val |= TRANSCONF_INTERLACE_IF_ID_ILK; |
| else |
| val |= TRANSCONF_INTERLACE_PF_PD_ILK; |
| |
| /* |
| * This would end up with an odd purple hue over |
| * the entire display. Make sure we don't do it. |
| */ |
| drm_WARN_ON(&dev_priv->drm, crtc_state->limited_color_range && |
| crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB); |
| |
| if (crtc_state->limited_color_range && |
| !intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) |
| val |= TRANSCONF_COLOR_RANGE_SELECT; |
| |
| if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB) |
| val |= TRANSCONF_OUTPUT_COLORSPACE_YUV709; |
| |
| val |= TRANSCONF_GAMMA_MODE(crtc_state->gamma_mode); |
| |
| val |= TRANSCONF_FRAME_START_DELAY(crtc_state->framestart_delay - 1); |
| val |= TRANSCONF_MSA_TIMING_DELAY(crtc_state->msa_timing_delay); |
| |
| intel_de_write(dev_priv, TRANSCONF(dev_priv, cpu_transcoder), val); |
| intel_de_posting_read(dev_priv, TRANSCONF(dev_priv, cpu_transcoder)); |
| } |
| |
| static void hsw_set_transconf(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| u32 val = 0; |
| |
| /* |
| * - During modeset the pipe is still disabled and must remain so |
| * - During fastset the pipe is already enabled and must remain so |
| */ |
| if (!intel_crtc_needs_modeset(crtc_state)) |
| val |= TRANSCONF_ENABLE; |
| |
| if (IS_HASWELL(dev_priv) && crtc_state->dither) |
| val |= TRANSCONF_DITHER_EN | TRANSCONF_DITHER_TYPE_SP; |
| |
| if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) |
| val |= TRANSCONF_INTERLACE_IF_ID_ILK; |
| else |
| val |= TRANSCONF_INTERLACE_PF_PD_ILK; |
| |
| if (IS_HASWELL(dev_priv) && |
| crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB) |
| val |= TRANSCONF_OUTPUT_COLORSPACE_YUV_HSW; |
| |
| intel_de_write(dev_priv, TRANSCONF(dev_priv, cpu_transcoder), val); |
| intel_de_posting_read(dev_priv, TRANSCONF(dev_priv, cpu_transcoder)); |
| } |
| |
| static void bdw_set_pipe_misc(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| u32 val = 0; |
| |
| switch (crtc_state->pipe_bpp) { |
| case 18: |
| val |= PIPE_MISC_BPC_6; |
| break; |
| case 24: |
| val |= PIPE_MISC_BPC_8; |
| break; |
| case 30: |
| val |= PIPE_MISC_BPC_10; |
| break; |
| case 36: |
| /* Port output 12BPC defined for ADLP+ */ |
| if (DISPLAY_VER(dev_priv) >= 13) |
| val |= PIPE_MISC_BPC_12_ADLP; |
| break; |
| default: |
| MISSING_CASE(crtc_state->pipe_bpp); |
| break; |
| } |
| |
| if (crtc_state->dither) |
| val |= PIPE_MISC_DITHER_ENABLE | PIPE_MISC_DITHER_TYPE_SP; |
| |
| if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 || |
| crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) |
| val |= PIPE_MISC_OUTPUT_COLORSPACE_YUV; |
| |
| if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) |
| val |= PIPE_MISC_YUV420_ENABLE | |
| PIPE_MISC_YUV420_MODE_FULL_BLEND; |
| |
| if (DISPLAY_VER(dev_priv) >= 11 && is_hdr_mode(crtc_state)) |
| val |= PIPE_MISC_HDR_MODE_PRECISION; |
| |
| if (DISPLAY_VER(dev_priv) >= 12) |
| val |= PIPE_MISC_PIXEL_ROUNDING_TRUNC; |
| |
| /* allow PSR with sprite enabled */ |
| if (IS_BROADWELL(dev_priv)) |
| val |= PIPE_MISC_PSR_MASK_SPRITE_ENABLE; |
| |
| intel_de_write(dev_priv, PIPE_MISC(crtc->pipe), val); |
| } |
| |
| int bdw_get_pipe_misc_bpp(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| u32 tmp; |
| |
| tmp = intel_de_read(dev_priv, PIPE_MISC(crtc->pipe)); |
| |
| switch (tmp & PIPE_MISC_BPC_MASK) { |
| case PIPE_MISC_BPC_6: |
| return 18; |
| case PIPE_MISC_BPC_8: |
| return 24; |
| case PIPE_MISC_BPC_10: |
| return 30; |
| /* |
| * PORT OUTPUT 12 BPC defined for ADLP+. |
| * |
| * TODO: |
| * For previous platforms with DSI interface, bits 5:7 |
| * are used for storing pipe_bpp irrespective of dithering. |
| * Since the value of 12 BPC is not defined for these bits |
| * on older platforms, need to find a workaround for 12 BPC |
| * MIPI DSI HW readout. |
| */ |
| case PIPE_MISC_BPC_12_ADLP: |
| if (DISPLAY_VER(dev_priv) >= 13) |
| return 36; |
| fallthrough; |
| default: |
| MISSING_CASE(tmp); |
| return 0; |
| } |
| } |
| |
| int ilk_get_lanes_required(int target_clock, int link_bw, int bpp) |
| { |
| /* |
| * Account for spread spectrum to avoid |
| * oversubscribing the link. Max center spread |
| * is 2.5%; use 5% for safety's sake. |
| */ |
| u32 bps = target_clock * bpp * 21 / 20; |
| return DIV_ROUND_UP(bps, link_bw * 8); |
| } |
| |
| void intel_get_m_n(struct drm_i915_private *i915, |
| struct intel_link_m_n *m_n, |
| i915_reg_t data_m_reg, i915_reg_t data_n_reg, |
| i915_reg_t link_m_reg, i915_reg_t link_n_reg) |
| { |
| m_n->link_m = intel_de_read(i915, link_m_reg) & DATA_LINK_M_N_MASK; |
| m_n->link_n = intel_de_read(i915, link_n_reg) & DATA_LINK_M_N_MASK; |
| m_n->data_m = intel_de_read(i915, data_m_reg) & DATA_LINK_M_N_MASK; |
| m_n->data_n = intel_de_read(i915, data_n_reg) & DATA_LINK_M_N_MASK; |
| m_n->tu = REG_FIELD_GET(TU_SIZE_MASK, intel_de_read(i915, data_m_reg)) + 1; |
| } |
| |
| void intel_cpu_transcoder_get_m1_n1(struct intel_crtc *crtc, |
| enum transcoder transcoder, |
| struct intel_link_m_n *m_n) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| if (DISPLAY_VER(dev_priv) >= 5) |
| intel_get_m_n(dev_priv, m_n, |
| PIPE_DATA_M1(dev_priv, transcoder), |
| PIPE_DATA_N1(dev_priv, transcoder), |
| PIPE_LINK_M1(dev_priv, transcoder), |
| PIPE_LINK_N1(dev_priv, transcoder)); |
| else |
| intel_get_m_n(dev_priv, m_n, |
| PIPE_DATA_M_G4X(pipe), PIPE_DATA_N_G4X(pipe), |
| PIPE_LINK_M_G4X(pipe), PIPE_LINK_N_G4X(pipe)); |
| } |
| |
| void intel_cpu_transcoder_get_m2_n2(struct intel_crtc *crtc, |
| enum transcoder transcoder, |
| struct intel_link_m_n *m_n) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (!intel_cpu_transcoder_has_m2_n2(dev_priv, transcoder)) |
| return; |
| |
| intel_get_m_n(dev_priv, m_n, |
| PIPE_DATA_M2(dev_priv, transcoder), |
| PIPE_DATA_N2(dev_priv, transcoder), |
| PIPE_LINK_M2(dev_priv, transcoder), |
| PIPE_LINK_N2(dev_priv, transcoder)); |
| } |
| |
| static void ilk_get_pfit_config(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| u32 ctl, pos, size; |
| enum pipe pipe; |
| |
| ctl = intel_de_read(dev_priv, PF_CTL(crtc->pipe)); |
| if ((ctl & PF_ENABLE) == 0) |
| return; |
| |
| if (IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv)) |
| pipe = REG_FIELD_GET(PF_PIPE_SEL_MASK_IVB, ctl); |
| else |
| pipe = crtc->pipe; |
| |
| crtc_state->pch_pfit.enabled = true; |
| |
| pos = intel_de_read(dev_priv, PF_WIN_POS(crtc->pipe)); |
| size = intel_de_read(dev_priv, PF_WIN_SZ(crtc->pipe)); |
| |
| drm_rect_init(&crtc_state->pch_pfit.dst, |
| REG_FIELD_GET(PF_WIN_XPOS_MASK, pos), |
| REG_FIELD_GET(PF_WIN_YPOS_MASK, pos), |
| REG_FIELD_GET(PF_WIN_XSIZE_MASK, size), |
| REG_FIELD_GET(PF_WIN_YSIZE_MASK, size)); |
| |
| /* |
| * We currently do not free assignements of panel fitters on |
| * ivb/hsw (since we don't use the higher upscaling modes which |
| * differentiates them) so just WARN about this case for now. |
| */ |
| drm_WARN_ON(&dev_priv->drm, pipe != crtc->pipe); |
| } |
| |
| static bool ilk_get_pipe_config(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| enum intel_display_power_domain power_domain; |
| intel_wakeref_t wakeref; |
| u32 tmp; |
| bool ret; |
| |
| power_domain = POWER_DOMAIN_PIPE(crtc->pipe); |
| wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain); |
| if (!wakeref) |
| return false; |
| |
| pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe; |
| pipe_config->shared_dpll = NULL; |
| |
| ret = false; |
| tmp = intel_de_read(dev_priv, |
| TRANSCONF(dev_priv, pipe_config->cpu_transcoder)); |
| if (!(tmp & TRANSCONF_ENABLE)) |
| goto out; |
| |
| switch (tmp & TRANSCONF_BPC_MASK) { |
| case TRANSCONF_BPC_6: |
| pipe_config->pipe_bpp = 18; |
| break; |
| case TRANSCONF_BPC_8: |
| pipe_config->pipe_bpp = 24; |
| break; |
| case TRANSCONF_BPC_10: |
| pipe_config->pipe_bpp = 30; |
| break; |
| case TRANSCONF_BPC_12: |
| pipe_config->pipe_bpp = 36; |
| break; |
| default: |
| break; |
| } |
| |
| if (tmp & TRANSCONF_COLOR_RANGE_SELECT) |
| pipe_config->limited_color_range = true; |
| |
| switch (tmp & TRANSCONF_OUTPUT_COLORSPACE_MASK) { |
| case TRANSCONF_OUTPUT_COLORSPACE_YUV601: |
| case TRANSCONF_OUTPUT_COLORSPACE_YUV709: |
| pipe_config->output_format = INTEL_OUTPUT_FORMAT_YCBCR444; |
| break; |
| default: |
| pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; |
| break; |
| } |
| |
| pipe_config->sink_format = pipe_config->output_format; |
| |
| pipe_config->gamma_mode = REG_FIELD_GET(TRANSCONF_GAMMA_MODE_MASK_ILK, tmp); |
| |
| pipe_config->framestart_delay = REG_FIELD_GET(TRANSCONF_FRAME_START_DELAY_MASK, tmp) + 1; |
| |
| pipe_config->msa_timing_delay = REG_FIELD_GET(TRANSCONF_MSA_TIMING_DELAY_MASK, tmp); |
| |
| intel_color_get_config(pipe_config); |
| |
| pipe_config->pixel_multiplier = 1; |
| |
| ilk_pch_get_config(pipe_config); |
| |
| intel_get_transcoder_timings(crtc, pipe_config); |
| intel_get_pipe_src_size(crtc, pipe_config); |
| |
| ilk_get_pfit_config(pipe_config); |
| |
| ret = true; |
| |
| out: |
| intel_display_power_put(dev_priv, power_domain, wakeref); |
| |
| return ret; |
| } |
| |
| static u8 joiner_pipes(struct drm_i915_private *i915) |
| { |
| u8 pipes; |
| |
| if (DISPLAY_VER(i915) >= 12) |
| pipes = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C) | BIT(PIPE_D); |
| else if (DISPLAY_VER(i915) >= 11) |
| pipes = BIT(PIPE_B) | BIT(PIPE_C); |
| else |
| pipes = 0; |
| |
| return pipes & DISPLAY_RUNTIME_INFO(i915)->pipe_mask; |
| } |
| |
| static bool transcoder_ddi_func_is_enabled(struct drm_i915_private *dev_priv, |
| enum transcoder cpu_transcoder) |
| { |
| enum intel_display_power_domain power_domain; |
| intel_wakeref_t wakeref; |
| u32 tmp = 0; |
| |
| power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder); |
| |
| with_intel_display_power_if_enabled(dev_priv, power_domain, wakeref) |
| tmp = intel_de_read(dev_priv, |
| TRANS_DDI_FUNC_CTL(dev_priv, cpu_transcoder)); |
| |
| return tmp & TRANS_DDI_FUNC_ENABLE; |
| } |
| |
| static void enabled_joiner_pipes(struct drm_i915_private *dev_priv, |
| u8 *primary_pipes, u8 *secondary_pipes) |
| { |
| struct intel_crtc *crtc; |
| |
| *primary_pipes = 0; |
| *secondary_pipes = 0; |
| |
| for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, |
| joiner_pipes(dev_priv)) { |
| enum intel_display_power_domain power_domain; |
| enum pipe pipe = crtc->pipe; |
| intel_wakeref_t wakeref; |
| |
| power_domain = intel_dsc_power_domain(crtc, (enum transcoder) pipe); |
| with_intel_display_power_if_enabled(dev_priv, power_domain, wakeref) { |
| u32 tmp = intel_de_read(dev_priv, ICL_PIPE_DSS_CTL1(pipe)); |
| |
| if (!(tmp & BIG_JOINER_ENABLE)) |
| continue; |
| |
| if (tmp & PRIMARY_BIG_JOINER_ENABLE) |
| *primary_pipes |= BIT(pipe); |
| else |
| *secondary_pipes |= BIT(pipe); |
| } |
| |
| if (DISPLAY_VER(dev_priv) < 13) |
| continue; |
| |
| power_domain = POWER_DOMAIN_PIPE(pipe); |
| with_intel_display_power_if_enabled(dev_priv, power_domain, wakeref) { |
| u32 tmp = intel_de_read(dev_priv, ICL_PIPE_DSS_CTL1(pipe)); |
| |
| if (tmp & UNCOMPRESSED_JOINER_PRIMARY) |
| *primary_pipes |= BIT(pipe); |
| if (tmp & UNCOMPRESSED_JOINER_SECONDARY) |
| *secondary_pipes |= BIT(pipe); |
| } |
| } |
| |
| /* Joiner pipes should always be consecutive primary and secondary */ |
| drm_WARN(&dev_priv->drm, *secondary_pipes != *primary_pipes << 1, |
| "Joiner misconfigured (primary pipes 0x%x, secondary pipes 0x%x)\n", |
| *primary_pipes, *secondary_pipes); |
| } |
| |
| static enum pipe get_joiner_primary_pipe(enum pipe pipe, u8 primary_pipes, u8 secondary_pipes) |
| { |
| if ((secondary_pipes & BIT(pipe)) == 0) |
| return pipe; |
| |
| /* ignore everything above our pipe */ |
| primary_pipes &= ~GENMASK(7, pipe); |
| |
| /* highest remaining bit should be our primary pipe */ |
| return fls(primary_pipes) - 1; |
| } |
| |
| static u8 get_joiner_secondary_pipes(enum pipe pipe, u8 primary_pipes, u8 secondary_pipes) |
| { |
| enum pipe primary_pipe, next_primary_pipe; |
| |
| primary_pipe = get_joiner_primary_pipe(pipe, primary_pipes, secondary_pipes); |
| |
| if ((primary_pipes & BIT(primary_pipe)) == 0) |
| return 0; |
| |
| /* ignore our primary pipe and everything below it */ |
| primary_pipes &= ~GENMASK(primary_pipe, 0); |
| /* make sure a high bit is set for the ffs() */ |
| primary_pipes |= BIT(7); |
| /* lowest remaining bit should be the next primary pipe */ |
| next_primary_pipe = ffs(primary_pipes) - 1; |
| |
| return secondary_pipes & GENMASK(next_primary_pipe - 1, primary_pipe); |
| } |
| |
| static u8 hsw_panel_transcoders(struct drm_i915_private *i915) |
| { |
| u8 panel_transcoder_mask = BIT(TRANSCODER_EDP); |
| |
| if (DISPLAY_VER(i915) >= 11) |
| panel_transcoder_mask |= BIT(TRANSCODER_DSI_0) | BIT(TRANSCODER_DSI_1); |
| |
| return panel_transcoder_mask; |
| } |
| |
| static u8 hsw_enabled_transcoders(struct intel_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u8 panel_transcoder_mask = hsw_panel_transcoders(dev_priv); |
| enum transcoder cpu_transcoder; |
| u8 primary_pipes, secondary_pipes; |
| u8 enabled_transcoders = 0; |
| |
| /* |
| * XXX: Do intel_display_power_get_if_enabled before reading this (for |
| * consistency and less surprising code; it's in always on power). |
| */ |
| for_each_cpu_transcoder_masked(dev_priv, cpu_transcoder, |
| panel_transcoder_mask) { |
| enum intel_display_power_domain power_domain; |
| intel_wakeref_t wakeref; |
| enum pipe trans_pipe; |
| u32 tmp = 0; |
| |
| power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder); |
| with_intel_display_power_if_enabled(dev_priv, power_domain, wakeref) |
| tmp = intel_de_read(dev_priv, |
| TRANS_DDI_FUNC_CTL(dev_priv, cpu_transcoder)); |
| |
| if (!(tmp & TRANS_DDI_FUNC_ENABLE)) |
| continue; |
| |
| switch (tmp & TRANS_DDI_EDP_INPUT_MASK) { |
| default: |
| drm_WARN(dev, 1, |
| "unknown pipe linked to transcoder %s\n", |
| transcoder_name(cpu_transcoder)); |
| fallthrough; |
| case TRANS_DDI_EDP_INPUT_A_ONOFF: |
| case TRANS_DDI_EDP_INPUT_A_ON: |
| trans_pipe = PIPE_A; |
| break; |
| case TRANS_DDI_EDP_INPUT_B_ONOFF: |
| trans_pipe = PIPE_B; |
| break; |
| case TRANS_DDI_EDP_INPUT_C_ONOFF: |
| trans_pipe = PIPE_C; |
| break; |
| case TRANS_DDI_EDP_INPUT_D_ONOFF: |
| trans_pipe = PIPE_D; |
| break; |
| } |
| |
| if (trans_pipe == crtc->pipe) |
| enabled_transcoders |= BIT(cpu_transcoder); |
| } |
| |
| /* single pipe or joiner primary */ |
| cpu_transcoder = (enum transcoder) crtc->pipe; |
| if (transcoder_ddi_func_is_enabled(dev_priv, cpu_transcoder)) |
| enabled_transcoders |= BIT(cpu_transcoder); |
| |
| /* joiner secondary -> consider the primary pipe's transcoder as well */ |
| enabled_joiner_pipes(dev_priv, &primary_pipes, &secondary_pipes); |
| if (secondary_pipes & BIT(crtc->pipe)) { |
| cpu_transcoder = (enum transcoder) |
| get_joiner_primary_pipe(crtc->pipe, primary_pipes, secondary_pipes); |
| if (transcoder_ddi_func_is_enabled(dev_priv, cpu_transcoder)) |
| enabled_transcoders |= BIT(cpu_transcoder); |
| } |
| |
| return enabled_transcoders; |
| } |
| |
| static bool has_edp_transcoders(u8 enabled_transcoders) |
| { |
| return enabled_transcoders & BIT(TRANSCODER_EDP); |
| } |
| |
| static bool has_dsi_transcoders(u8 enabled_transcoders) |
| { |
| return enabled_transcoders & (BIT(TRANSCODER_DSI_0) | |
| BIT(TRANSCODER_DSI_1)); |
| } |
| |
| static bool has_pipe_transcoders(u8 enabled_transcoders) |
| { |
| return enabled_transcoders & ~(BIT(TRANSCODER_EDP) | |
| BIT(TRANSCODER_DSI_0) | |
| BIT(TRANSCODER_DSI_1)); |
| } |
| |
| static void assert_enabled_transcoders(struct drm_i915_private *i915, |
| u8 enabled_transcoders) |
| { |
| /* Only one type of transcoder please */ |
| drm_WARN_ON(&i915->drm, |
| has_edp_transcoders(enabled_transcoders) + |
| has_dsi_transcoders(enabled_transcoders) + |
| has_pipe_transcoders(enabled_transcoders) > 1); |
| |
| /* Only DSI transcoders can be ganged */ |
| drm_WARN_ON(&i915->drm, |
| !has_dsi_transcoders(enabled_transcoders) && |
| !is_power_of_2(enabled_transcoders)); |
| } |
| |
| static bool hsw_get_transcoder_state(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config, |
| struct intel_display_power_domain_set *power_domain_set) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| unsigned long enabled_transcoders; |
| u32 tmp; |
| |
| enabled_transcoders = hsw_enabled_transcoders(crtc); |
| if (!enabled_transcoders) |
| return false; |
| |
| assert_enabled_transcoders(dev_priv, enabled_transcoders); |
| |
| /* |
| * With the exception of DSI we should only ever have |
| * a single enabled transcoder. With DSI let's just |
| * pick the first one. |
| */ |
| pipe_config->cpu_transcoder = ffs(enabled_transcoders) - 1; |
| |
| if (!intel_display_power_get_in_set_if_enabled(dev_priv, power_domain_set, |
| POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder))) |
| return false; |
| |
| if (hsw_panel_transcoders(dev_priv) & BIT(pipe_config->cpu_transcoder)) { |
| tmp = intel_de_read(dev_priv, |
| TRANS_DDI_FUNC_CTL(dev_priv, pipe_config->cpu_transcoder)); |
| |
| if ((tmp & TRANS_DDI_EDP_INPUT_MASK) == TRANS_DDI_EDP_INPUT_A_ONOFF) |
| pipe_config->pch_pfit.force_thru = true; |
| } |
| |
| tmp = intel_de_read(dev_priv, |
| TRANSCONF(dev_priv, pipe_config->cpu_transcoder)); |
| |
| return tmp & TRANSCONF_ENABLE; |
| } |
| |
| static bool bxt_get_dsi_transcoder_state(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config, |
| struct intel_display_power_domain_set *power_domain_set) |
| { |
| struct intel_display *display = to_intel_display(crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum transcoder cpu_transcoder; |
| enum port port; |
| u32 tmp; |
| |
| for_each_port_masked(port, BIT(PORT_A) | BIT(PORT_C)) { |
| if (port == PORT_A) |
| cpu_transcoder = TRANSCODER_DSI_A; |
| else |
| cpu_transcoder = TRANSCODER_DSI_C; |
| |
| if (!intel_display_power_get_in_set_if_enabled(dev_priv, power_domain_set, |
| POWER_DOMAIN_TRANSCODER(cpu_transcoder))) |
| continue; |
| |
| /* |
| * The PLL needs to be enabled with a valid divider |
| * configuration, otherwise accessing DSI registers will hang |
| * the machine. See BSpec North Display Engine |
| * registers/MIPI[BXT]. We can break out here early, since we |
| * need the same DSI PLL to be enabled for both DSI ports. |
| */ |
| if (!bxt_dsi_pll_is_enabled(dev_priv)) |
| break; |
| |
| /* XXX: this works for video mode only */ |
| tmp = intel_de_read(display, BXT_MIPI_PORT_CTRL(port)); |
| if (!(tmp & DPI_ENABLE)) |
| continue; |
| |
| tmp = intel_de_read(display, MIPI_CTRL(display, port)); |
| if ((tmp & BXT_PIPE_SELECT_MASK) != BXT_PIPE_SELECT(crtc->pipe)) |
| continue; |
| |
| pipe_config->cpu_transcoder = cpu_transcoder; |
| break; |
| } |
| |
| return transcoder_is_dsi(pipe_config->cpu_transcoder); |
| } |
| |
| static void intel_joiner_get_config(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| u8 primary_pipes, secondary_pipes; |
| enum pipe pipe = crtc->pipe; |
| |
| enabled_joiner_pipes(i915, &primary_pipes, &secondary_pipes); |
| |
| if (((primary_pipes | secondary_pipes) & BIT(pipe)) == 0) |
| return; |
| |
| crtc_state->joiner_pipes = |
| BIT(get_joiner_primary_pipe(pipe, primary_pipes, secondary_pipes)) | |
| get_joiner_secondary_pipes(pipe, primary_pipes, secondary_pipes); |
| } |
| |
| static bool hsw_get_pipe_config(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| bool active; |
| u32 tmp; |
| |
| if (!intel_display_power_get_in_set_if_enabled(dev_priv, &crtc->hw_readout_power_domains, |
| POWER_DOMAIN_PIPE(crtc->pipe))) |
| return false; |
| |
| pipe_config->shared_dpll = NULL; |
| |
| active = hsw_get_transcoder_state(crtc, pipe_config, &crtc->hw_readout_power_domains); |
| |
| if ((IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) && |
| bxt_get_dsi_transcoder_state(crtc, pipe_config, &crtc->hw_readout_power_domains)) { |
| drm_WARN_ON(&dev_priv->drm, active); |
| active = true; |
| } |
| |
| if (!active) |
| goto out; |
| |
| intel_joiner_get_config(pipe_config); |
| intel_dsc_get_config(pipe_config); |
| |
| if (!transcoder_is_dsi(pipe_config->cpu_transcoder) || |
| DISPLAY_VER(dev_priv) >= 11) |
| intel_get_transcoder_timings(crtc, pipe_config); |
| |
| if (HAS_VRR(dev_priv) && !transcoder_is_dsi(pipe_config->cpu_transcoder)) |
| intel_vrr_get_config(pipe_config); |
| |
| intel_get_pipe_src_size(crtc, pipe_config); |
| |
| if (IS_HASWELL(dev_priv)) { |
| u32 tmp = intel_de_read(dev_priv, |
| TRANSCONF(dev_priv, pipe_config->cpu_transcoder)); |
| |
| if (tmp & TRANSCONF_OUTPUT_COLORSPACE_YUV_HSW) |
| pipe_config->output_format = INTEL_OUTPUT_FORMAT_YCBCR444; |
| else |
| pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; |
| } else { |
| pipe_config->output_format = |
| bdw_get_pipe_misc_output_format(crtc); |
| } |
| |
| pipe_config->sink_format = pipe_config->output_format; |
| |
| intel_color_get_config(pipe_config); |
| |
| tmp = intel_de_read(dev_priv, WM_LINETIME(crtc->pipe)); |
| pipe_config->linetime = REG_FIELD_GET(HSW_LINETIME_MASK, tmp); |
| if (IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) |
| pipe_config->ips_linetime = |
| REG_FIELD_GET(HSW_IPS_LINETIME_MASK, tmp); |
| |
| if (intel_display_power_get_in_set_if_enabled(dev_priv, &crtc->hw_readout_power_domains, |
| POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe))) { |
| if (DISPLAY_VER(dev_priv) >= 9) |
| skl_scaler_get_config(pipe_config); |
| else |
| ilk_get_pfit_config(pipe_config); |
| } |
| |
| hsw_ips_get_config(pipe_config); |
| |
| if (pipe_config->cpu_transcoder != TRANSCODER_EDP && |
| !transcoder_is_dsi(pipe_config->cpu_transcoder)) { |
| pipe_config->pixel_multiplier = |
| intel_de_read(dev_priv, |
| TRANS_MULT(dev_priv, pipe_config->cpu_transcoder)) + 1; |
| } else { |
| pipe_config->pixel_multiplier = 1; |
| } |
| |
| if (!transcoder_is_dsi(pipe_config->cpu_transcoder)) { |
| tmp = intel_de_read(dev_priv, hsw_chicken_trans_reg(dev_priv, pipe_config->cpu_transcoder)); |
| |
| pipe_config->framestart_delay = REG_FIELD_GET(HSW_FRAME_START_DELAY_MASK, tmp) + 1; |
| } else { |
| /* no idea if this is correct */ |
| pipe_config->framestart_delay = 1; |
| } |
| |
| out: |
| intel_display_power_put_all_in_set(dev_priv, &crtc->hw_readout_power_domains); |
| |
| return active; |
| } |
| |
| bool intel_crtc_get_pipe_config(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| |
| if (!i915->display.funcs.display->get_pipe_config(crtc, crtc_state)) |
| return false; |
| |
| crtc_state->hw.active = true; |
| |
| intel_crtc_readout_derived_state(crtc_state); |
| |
| return true; |
| } |
| |
| int intel_dotclock_calculate(int link_freq, |
| const struct intel_link_m_n *m_n) |
| { |
| /* |
| * The calculation for the data clock -> pixel clock is: |
| * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp |
| * But we want to avoid losing precison if possible, so: |
| * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp)) |
| * |
| * and for link freq (10kbs units) -> pixel clock it is: |
| * link_symbol_clock = link_freq * 10 / link_symbol_size |
| * pixel_clock = (m * link_symbol_clock) / n |
| * or for more precision: |
| * pixel_clock = (m * link_freq * 10) / (n * link_symbol_size) |
| */ |
| |
| if (!m_n->link_n) |
| return 0; |
| |
| return DIV_ROUND_UP_ULL(mul_u32_u32(m_n->link_m, link_freq * 10), |
| m_n->link_n * intel_dp_link_symbol_size(link_freq)); |
| } |
| |
| int intel_crtc_dotclock(const struct intel_crtc_state *pipe_config) |
| { |
| int dotclock; |
| |
| if (intel_crtc_has_dp_encoder(pipe_config)) |
| dotclock = intel_dotclock_calculate(pipe_config->port_clock, |
| &pipe_config->dp_m_n); |
| else if (pipe_config->has_hdmi_sink && pipe_config->pipe_bpp > 24) |
| dotclock = DIV_ROUND_CLOSEST(pipe_config->port_clock * 24, |
| pipe_config->pipe_bpp); |
| else |
| dotclock = pipe_config->port_clock; |
| |
| if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 && |
| !intel_crtc_has_dp_encoder(pipe_config)) |
| dotclock *= 2; |
| |
| if (pipe_config->pixel_multiplier) |
| dotclock /= pipe_config->pixel_multiplier; |
| |
| return dotclock; |
| } |
| |
| /* Returns the currently programmed mode of the given encoder. */ |
| struct drm_display_mode * |
| intel_encoder_current_mode(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_crtc_state *crtc_state; |
| struct drm_display_mode *mode; |
| struct intel_crtc *crtc; |
| enum pipe pipe; |
| |
| if (!encoder->get_hw_state(encoder, &pipe)) |
| return NULL; |
| |
| crtc = intel_crtc_for_pipe(dev_priv, pipe); |
| |
| mode = kzalloc(sizeof(*mode), GFP_KERNEL); |
| if (!mode) |
| return NULL; |
| |
| crtc_state = intel_crtc_state_alloc(crtc); |
| if (!crtc_state) { |
| kfree(mode); |
| return NULL; |
| } |
| |
| if (!intel_crtc_get_pipe_config(crtc_state)) { |
| intel_crtc_destroy_state(&crtc->base, &crtc_state->uapi); |
| kfree(mode); |
| return NULL; |
| } |
| |
| intel_encoder_get_config(encoder, crtc_state); |
| |
| intel_mode_from_crtc_timings(mode, &crtc_state->hw.adjusted_mode); |
| |
| intel_crtc_destroy_state(&crtc->base, &crtc_state->uapi); |
| |
| return mode; |
| } |
| |
| static bool encoders_cloneable(const struct intel_encoder *a, |
| const struct intel_encoder *b) |
| { |
| /* masks could be asymmetric, so check both ways */ |
| return a == b || (a->cloneable & BIT(b->type) && |
| b->cloneable & BIT(a->type)); |
| } |
| |
| static bool check_single_encoder_cloning(struct intel_atomic_state *state, |
| struct intel_crtc *crtc, |
| struct intel_encoder *encoder) |
| { |
| struct intel_encoder *source_encoder; |
| struct drm_connector *connector; |
| struct drm_connector_state *connector_state; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, connector, connector_state, i) { |
| if (connector_state->crtc != &crtc->base) |
| continue; |
| |
| source_encoder = |
| to_intel_encoder(connector_state->best_encoder); |
| if (!encoders_cloneable(encoder, source_encoder)) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static int icl_add_linked_planes(struct intel_atomic_state *state) |
| { |
| struct intel_plane *plane, *linked; |
| struct intel_plane_state *plane_state, *linked_plane_state; |
| int i; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| linked = plane_state->planar_linked_plane; |
| |
| if (!linked) |
| continue; |
| |
| linked_plane_state = intel_atomic_get_plane_state(state, linked); |
| if (IS_ERR(linked_plane_state)) |
| return PTR_ERR(linked_plane_state); |
| |
| drm_WARN_ON(state->base.dev, |
| linked_plane_state->planar_linked_plane != plane); |
| drm_WARN_ON(state->base.dev, |
| linked_plane_state->planar_slave == plane_state->planar_slave); |
| } |
| |
| return 0; |
| } |
| |
| static int icl_check_nv12_planes(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct intel_plane *plane, *linked; |
| struct intel_plane_state *plane_state; |
| int i; |
| |
| if (DISPLAY_VER(dev_priv) < 11) |
| return 0; |
| |
| /* |
| * Destroy all old plane links and make the slave plane invisible |
| * in the crtc_state->active_planes mask. |
| */ |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| if (plane->pipe != crtc->pipe || !plane_state->planar_linked_plane) |
| continue; |
| |
| plane_state->planar_linked_plane = NULL; |
| if (plane_state->planar_slave && !plane_state->uapi.visible) { |
| crtc_state->enabled_planes &= ~BIT(plane->id); |
| crtc_state->active_planes &= ~BIT(plane->id); |
| crtc_state->update_planes |= BIT(plane->id); |
| crtc_state->data_rate[plane->id] = 0; |
| crtc_state->rel_data_rate[plane->id] = 0; |
| } |
| |
| plane_state->planar_slave = false; |
| } |
| |
| if (!crtc_state->nv12_planes) |
| return 0; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| struct intel_plane_state *linked_state = NULL; |
| |
| if (plane->pipe != crtc->pipe || |
| !(crtc_state->nv12_planes & BIT(plane->id))) |
| continue; |
| |
| for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, linked) { |
| if (!icl_is_nv12_y_plane(dev_priv, linked->id)) |
| continue; |
| |
| if (crtc_state->active_planes & BIT(linked->id)) |
| continue; |
| |
| linked_state = intel_atomic_get_plane_state(state, linked); |
| if (IS_ERR(linked_state)) |
| return PTR_ERR(linked_state); |
| |
| break; |
| } |
| |
| if (!linked_state) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Need %d free Y planes for planar YUV\n", |
| hweight8(crtc_state->nv12_planes)); |
| |
| return -EINVAL; |
| } |
| |
| plane_state->planar_linked_plane = linked; |
| |
| linked_state->planar_slave = true; |
| linked_state->planar_linked_plane = plane; |
| crtc_state->enabled_planes |= BIT(linked->id); |
| crtc_state->active_planes |= BIT(linked->id); |
| crtc_state->update_planes |= BIT(linked->id); |
| crtc_state->data_rate[linked->id] = |
| crtc_state->data_rate_y[plane->id]; |
| crtc_state->rel_data_rate[linked->id] = |
| crtc_state->rel_data_rate_y[plane->id]; |
| drm_dbg_kms(&dev_priv->drm, "Using %s as Y plane for %s\n", |
| linked->base.name, plane->base.name); |
| |
| /* Copy parameters to slave plane */ |
| linked_state->ctl = plane_state->ctl | PLANE_CTL_YUV420_Y_PLANE; |
| linked_state->color_ctl = plane_state->color_ctl; |
| linked_state->view = plane_state->view; |
| linked_state->decrypt = plane_state->decrypt; |
| |
| intel_plane_copy_hw_state(linked_state, plane_state); |
| linked_state->uapi.src = plane_state->uapi.src; |
| linked_state->uapi.dst = plane_state->uapi.dst; |
| |
| if (icl_is_hdr_plane(dev_priv, plane->id)) { |
| if (linked->id == PLANE_7) |
| plane_state->cus_ctl |= PLANE_CUS_Y_PLANE_7_ICL; |
| else if (linked->id == PLANE_6) |
| plane_state->cus_ctl |= PLANE_CUS_Y_PLANE_6_ICL; |
| else if (linked->id == PLANE_5) |
| plane_state->cus_ctl |= PLANE_CUS_Y_PLANE_5_RKL; |
| else if (linked->id == PLANE_4) |
| plane_state->cus_ctl |= PLANE_CUS_Y_PLANE_4_RKL; |
| else |
| MISSING_CASE(linked->id); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static u16 hsw_linetime_wm(const struct intel_crtc_state *crtc_state) |
| { |
| const struct drm_display_mode *pipe_mode = |
| &crtc_state->hw.pipe_mode; |
| int linetime_wm; |
| |
| if (!crtc_state->hw.enable) |
| return 0; |
| |
| linetime_wm = DIV_ROUND_CLOSEST(pipe_mode->crtc_htotal * 1000 * 8, |
| pipe_mode->crtc_clock); |
| |
| return min(linetime_wm, 0x1ff); |
| } |
| |
| static u16 hsw_ips_linetime_wm(const struct intel_crtc_state *crtc_state, |
| const struct intel_cdclk_state *cdclk_state) |
| { |
| const struct drm_display_mode *pipe_mode = |
| &crtc_state->hw.pipe_mode; |
| int linetime_wm; |
| |
| if (!crtc_state->hw.enable) |
| return 0; |
| |
| linetime_wm = DIV_ROUND_CLOSEST(pipe_mode->crtc_htotal * 1000 * 8, |
| cdclk_state->logical.cdclk); |
| |
| return min(linetime_wm, 0x1ff); |
| } |
| |
| static u16 skl_linetime_wm(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| const struct drm_display_mode *pipe_mode = |
| &crtc_state->hw.pipe_mode; |
| int linetime_wm; |
| |
| if (!crtc_state->hw.enable) |
| return 0; |
| |
| linetime_wm = DIV_ROUND_UP(pipe_mode->crtc_htotal * 1000 * 8, |
| crtc_state->pixel_rate); |
| |
| /* Display WA #1135: BXT:ALL GLK:ALL */ |
| if ((IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) && |
| skl_watermark_ipc_enabled(dev_priv)) |
| linetime_wm /= 2; |
| |
| return min(linetime_wm, 0x1ff); |
| } |
| |
| static int hsw_compute_linetime_wm(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct intel_cdclk_state *cdclk_state; |
| |
| if (DISPLAY_VER(dev_priv) >= 9) |
| crtc_state->linetime = skl_linetime_wm(crtc_state); |
| else |
| crtc_state->linetime = hsw_linetime_wm(crtc_state); |
| |
| if (!hsw_crtc_supports_ips(crtc)) |
| return 0; |
| |
| cdclk_state = intel_atomic_get_cdclk_state(state); |
| if (IS_ERR(cdclk_state)) |
| return PTR_ERR(cdclk_state); |
| |
| crtc_state->ips_linetime = hsw_ips_linetime_wm(crtc_state, |
| cdclk_state); |
| |
| return 0; |
| } |
| |
| static int intel_crtc_atomic_check(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| int ret; |
| |
| if (DISPLAY_VER(dev_priv) < 5 && !IS_G4X(dev_priv) && |
| intel_crtc_needs_modeset(crtc_state) && |
| !crtc_state->hw.active) |
| crtc_state->update_wm_post = true; |
| |
| if (intel_crtc_needs_modeset(crtc_state)) { |
| ret = intel_dpll_crtc_get_shared_dpll(state, crtc); |
| if (ret) |
| return ret; |
| } |
| |
| ret = intel_color_check(state, crtc); |
| if (ret) |
| return ret; |
| |
| ret = intel_compute_pipe_wm(state, crtc); |
| if (ret) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Target pipe watermarks are invalid\n"); |
| return ret; |
| } |
| |
| /* |
| * Calculate 'intermediate' watermarks that satisfy both the |
| * old state and the new state. We can program these |
| * immediately. |
| */ |
| ret = intel_compute_intermediate_wm(state, crtc); |
| if (ret) { |
| drm_dbg_kms(&dev_priv->drm, |
| "No valid intermediate pipe watermarks are possible\n"); |
| return ret; |
| } |
| |
| if (DISPLAY_VER(dev_priv) >= 9) { |
| if (intel_crtc_needs_modeset(crtc_state) || |
| intel_crtc_needs_fastset(crtc_state)) { |
| ret = skl_update_scaler_crtc(crtc_state); |
| if (ret) |
| return ret; |
| } |
| |
| ret = intel_atomic_setup_scalers(dev_priv, crtc, crtc_state); |
| if (ret) |
| return ret; |
| } |
| |
| if (HAS_IPS(dev_priv)) { |
| ret = hsw_ips_compute_config(state, crtc); |
| if (ret) |
| return ret; |
| } |
| |
| if (DISPLAY_VER(dev_priv) >= 9 || |
| IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) { |
| ret = hsw_compute_linetime_wm(state, crtc); |
| if (ret) |
| return ret; |
| |
| } |
| |
| ret = intel_psr2_sel_fetch_update(state, crtc); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int |
| compute_sink_pipe_bpp(const struct drm_connector_state *conn_state, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct drm_connector *connector = conn_state->connector; |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| const struct drm_display_info *info = &connector->display_info; |
| int bpp; |
| |
| switch (conn_state->max_bpc) { |
| case 6 ... 7: |
| bpp = 6 * 3; |
| break; |
| case 8 ... 9: |
| bpp = 8 * 3; |
| break; |
| case 10 ... 11: |
| bpp = 10 * 3; |
| break; |
| case 12 ... 16: |
| bpp = 12 * 3; |
| break; |
| default: |
| MISSING_CASE(conn_state->max_bpc); |
| return -EINVAL; |
| } |
| |
| if (bpp < crtc_state->pipe_bpp) { |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] Limiting display bpp to %d " |
| "(EDID bpp %d, max requested bpp %d, max platform bpp %d)\n", |
| connector->base.id, connector->name, |
| bpp, 3 * info->bpc, |
| 3 * conn_state->max_requested_bpc, |
| crtc_state->pipe_bpp); |
| |
| crtc_state->pipe_bpp = bpp; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| compute_baseline_pipe_bpp(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct drm_connector *connector; |
| struct drm_connector_state *connector_state; |
| int bpp, i; |
| |
| if ((IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) || |
| IS_CHERRYVIEW(dev_priv))) |
| bpp = 10*3; |
| else if (DISPLAY_VER(dev_priv) >= 5) |
| bpp = 12*3; |
| else |
| bpp = 8*3; |
| |
| crtc_state->pipe_bpp = bpp; |
| |
| /* Clamp display bpp to connector max bpp */ |
| for_each_new_connector_in_state(&state->base, connector, connector_state, i) { |
| int ret; |
| |
| if (connector_state->crtc != &crtc->base) |
| continue; |
| |
| ret = compute_sink_pipe_bpp(connector_state, crtc_state); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static bool check_digital_port_conflicts(struct intel_atomic_state *state) |
| { |
| struct drm_device *dev = state->base.dev; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| unsigned int used_ports = 0; |
| unsigned int used_mst_ports = 0; |
| bool ret = true; |
| |
| /* |
| * We're going to peek into connector->state, |
| * hence connection_mutex must be held. |
| */ |
| drm_modeset_lock_assert_held(&dev->mode_config.connection_mutex); |
| |
| /* |
| * Walk the connector list instead of the encoder |
| * list to detect the problem on ddi platforms |
| * where there's just one encoder per digital port. |
| */ |
| drm_connector_list_iter_begin(dev, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| struct drm_connector_state *connector_state; |
| struct intel_encoder *encoder; |
| |
| connector_state = |
| drm_atomic_get_new_connector_state(&state->base, |
| connector); |
| if (!connector_state) |
| connector_state = connector->state; |
| |
| if (!connector_state->best_encoder) |
| continue; |
| |
| encoder = to_intel_encoder(connector_state->best_encoder); |
| |
| drm_WARN_ON(dev, !connector_state->crtc); |
| |
| switch (encoder->type) { |
| case INTEL_OUTPUT_DDI: |
| if (drm_WARN_ON(dev, !HAS_DDI(to_i915(dev)))) |
| break; |
| fallthrough; |
| case INTEL_OUTPUT_DP: |
| case INTEL_OUTPUT_HDMI: |
| case INTEL_OUTPUT_EDP: |
| /* the same port mustn't appear more than once */ |
| if (used_ports & BIT(encoder->port)) |
| ret = false; |
| |
| used_ports |= BIT(encoder->port); |
| break; |
| case INTEL_OUTPUT_DP_MST: |
| used_mst_ports |= |
| 1 << encoder->port; |
| break; |
| default: |
| break; |
| } |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| /* can't mix MST and SST/HDMI on the same port */ |
| if (used_ports & used_mst_ports) |
| return false; |
| |
| return ret; |
| } |
| |
| static void |
| intel_crtc_copy_uapi_to_hw_state_nomodeset(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| |
| WARN_ON(intel_crtc_is_joiner_secondary(crtc_state)); |
| |
| drm_property_replace_blob(&crtc_state->hw.degamma_lut, |
| crtc_state->uapi.degamma_lut); |
| drm_property_replace_blob(&crtc_state->hw.gamma_lut, |
| crtc_state->uapi.gamma_lut); |
| drm_property_replace_blob(&crtc_state->hw.ctm, |
| crtc_state->uapi.ctm); |
| } |
| |
| static void |
| intel_crtc_copy_uapi_to_hw_state_modeset(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| |
| WARN_ON(intel_crtc_is_joiner_secondary(crtc_state)); |
| |
| crtc_state->hw.enable = crtc_state->uapi.enable; |
| crtc_state->hw.active = crtc_state->uapi.active; |
| drm_mode_copy(&crtc_state->hw.mode, |
| &crtc_state->uapi.mode); |
| drm_mode_copy(&crtc_state->hw.adjusted_mode, |
| &crtc_state->uapi.adjusted_mode); |
| crtc_state->hw.scaling_filter = crtc_state->uapi.scaling_filter; |
| |
| intel_crtc_copy_uapi_to_hw_state_nomodeset(state, crtc); |
| } |
| |
| static void |
| copy_joiner_crtc_state_nomodeset(struct intel_atomic_state *state, |
| struct intel_crtc *secondary_crtc) |
| { |
| struct intel_crtc_state *secondary_crtc_state = |
| intel_atomic_get_new_crtc_state(state, secondary_crtc); |
| struct intel_crtc *primary_crtc = intel_primary_crtc(secondary_crtc_state); |
| const struct intel_crtc_state *primary_crtc_state = |
| intel_atomic_get_new_crtc_state(state, primary_crtc); |
| |
| drm_property_replace_blob(&secondary_crtc_state->hw.degamma_lut, |
| primary_crtc_state->hw.degamma_lut); |
| drm_property_replace_blob(&secondary_crtc_state->hw.gamma_lut, |
| primary_crtc_state->hw.gamma_lut); |
| drm_property_replace_blob(&secondary_crtc_state->hw.ctm, |
| primary_crtc_state->hw.ctm); |
| |
| secondary_crtc_state->uapi.color_mgmt_changed = primary_crtc_state->uapi.color_mgmt_changed; |
| } |
| |
| static int |
| copy_joiner_crtc_state_modeset(struct intel_atomic_state *state, |
| struct intel_crtc *secondary_crtc) |
| { |
| struct intel_crtc_state *secondary_crtc_state = |
| intel_atomic_get_new_crtc_state(state, secondary_crtc); |
| struct intel_crtc *primary_crtc = intel_primary_crtc(secondary_crtc_state); |
| const struct intel_crtc_state *primary_crtc_state = |
| intel_atomic_get_new_crtc_state(state, primary_crtc); |
| struct intel_crtc_state *saved_state; |
| |
| WARN_ON(primary_crtc_state->joiner_pipes != |
| secondary_crtc_state->joiner_pipes); |
| |
| saved_state = kmemdup(primary_crtc_state, sizeof(*saved_state), GFP_KERNEL); |
| if (!saved_state) |
| return -ENOMEM; |
| |
| /* preserve some things from the slave's original crtc state */ |
| saved_state->uapi = secondary_crtc_state->uapi; |
| saved_state->scaler_state = secondary_crtc_state->scaler_state; |
| saved_state->shared_dpll = secondary_crtc_state->shared_dpll; |
| saved_state->crc_enabled = secondary_crtc_state->crc_enabled; |
| |
| intel_crtc_free_hw_state(secondary_crtc_state); |
| if (secondary_crtc_state->dp_tunnel_ref.tunnel) |
| drm_dp_tunnel_ref_put(&secondary_crtc_state->dp_tunnel_ref); |
| memcpy(secondary_crtc_state, saved_state, sizeof(*secondary_crtc_state)); |
| kfree(saved_state); |
| |
| /* Re-init hw state */ |
| memset(&secondary_crtc_state->hw, 0, sizeof(secondary_crtc_state->hw)); |
| secondary_crtc_state->hw.enable = primary_crtc_state->hw.enable; |
| secondary_crtc_state->hw.active = primary_crtc_state->hw.active; |
| drm_mode_copy(&secondary_crtc_state->hw.mode, |
| &primary_crtc_state->hw.mode); |
| drm_mode_copy(&secondary_crtc_state->hw.pipe_mode, |
| &primary_crtc_state->hw.pipe_mode); |
| drm_mode_copy(&secondary_crtc_state->hw.adjusted_mode, |
| &primary_crtc_state->hw.adjusted_mode); |
| secondary_crtc_state->hw.scaling_filter = primary_crtc_state->hw.scaling_filter; |
| |
| if (primary_crtc_state->dp_tunnel_ref.tunnel) |
| drm_dp_tunnel_ref_get(primary_crtc_state->dp_tunnel_ref.tunnel, |
| &secondary_crtc_state->dp_tunnel_ref); |
| |
| copy_joiner_crtc_state_nomodeset(state, secondary_crtc); |
| |
| secondary_crtc_state->uapi.mode_changed = primary_crtc_state->uapi.mode_changed; |
| secondary_crtc_state->uapi.connectors_changed = primary_crtc_state->uapi.connectors_changed; |
| secondary_crtc_state->uapi.active_changed = primary_crtc_state->uapi.active_changed; |
| |
| WARN_ON(primary_crtc_state->joiner_pipes != |
| secondary_crtc_state->joiner_pipes); |
| |
| return 0; |
| } |
| |
| static int |
| intel_crtc_prepare_cleared_state(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| struct intel_crtc_state *saved_state; |
| |
| saved_state = intel_crtc_state_alloc(crtc); |
| if (!saved_state) |
| return -ENOMEM; |
| |
| /* free the old crtc_state->hw members */ |
| intel_crtc_free_hw_state(crtc_state); |
| |
| intel_dp_tunnel_atomic_clear_stream_bw(state, crtc_state); |
| |
| /* FIXME: before the switch to atomic started, a new pipe_config was |
| * kzalloc'd. Code that depends on any field being zero should be |
| * fixed, so that the crtc_state can be safely duplicated. For now, |
| * only fields that are know to not cause problems are preserved. */ |
| |
| saved_state->uapi = crtc_state->uapi; |
| saved_state->inherited = crtc_state->inherited; |
| saved_state->scaler_state = crtc_state->scaler_state; |
| saved_state->shared_dpll = crtc_state->shared_dpll; |
| saved_state->dpll_hw_state = crtc_state->dpll_hw_state; |
| memcpy(saved_state->icl_port_dplls, crtc_state->icl_port_dplls, |
| sizeof(saved_state->icl_port_dplls)); |
| saved_state->crc_enabled = crtc_state->crc_enabled; |
| if (IS_G4X(dev_priv) || |
| IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| saved_state->wm = crtc_state->wm; |
| |
| memcpy(crtc_state, saved_state, sizeof(*crtc_state)); |
| kfree(saved_state); |
| |
| intel_crtc_copy_uapi_to_hw_state_modeset(state, crtc); |
| |
| return 0; |
| } |
| |
| static int |
| intel_modeset_pipe_config(struct intel_atomic_state *state, |
| struct intel_crtc *crtc, |
| const struct intel_link_bw_limits *limits) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct drm_connector *connector; |
| struct drm_connector_state *connector_state; |
| int pipe_src_w, pipe_src_h; |
| int base_bpp, ret, i; |
| |
| crtc_state->cpu_transcoder = (enum transcoder) crtc->pipe; |
| |
| crtc_state->framestart_delay = 1; |
| |
| /* |
| * Sanitize sync polarity flags based on requested ones. If neither |
| * positive or negative polarity is requested, treat this as meaning |
| * negative polarity. |
| */ |
| if (!(crtc_state->hw.adjusted_mode.flags & |
| (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC))) |
| crtc_state->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC; |
| |
| if (!(crtc_state->hw.adjusted_mode.flags & |
| (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC))) |
| crtc_state->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC; |
| |
| ret = compute_baseline_pipe_bpp(state, crtc); |
| if (ret) |
| return ret; |
| |
| crtc_state->fec_enable = limits->force_fec_pipes & BIT(crtc->pipe); |
| crtc_state->max_link_bpp_x16 = limits->max_bpp_x16[crtc->pipe]; |
| |
| if (crtc_state->pipe_bpp > to_bpp_int(crtc_state->max_link_bpp_x16)) { |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] Link bpp limited to " BPP_X16_FMT "\n", |
| crtc->base.base.id, crtc->base.name, |
| BPP_X16_ARGS(crtc_state->max_link_bpp_x16)); |
| crtc_state->bw_constrained = true; |
| } |
| |
| base_bpp = crtc_state->pipe_bpp; |
| |
| /* |
| * Determine the real pipe dimensions. Note that stereo modes can |
| * increase the actual pipe size due to the frame doubling and |
| * insertion of additional space for blanks between the frame. This |
| * is stored in the crtc timings. We use the requested mode to do this |
| * computation to clearly distinguish it from the adjusted mode, which |
| * can be changed by the connectors in the below retry loop. |
| */ |
| drm_mode_get_hv_timing(&crtc_state->hw.mode, |
| &pipe_src_w, &pipe_src_h); |
| drm_rect_init(&crtc_state->pipe_src, 0, 0, |
| pipe_src_w, pipe_src_h); |
| |
| for_each_new_connector_in_state(&state->base, connector, connector_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(connector_state->best_encoder); |
| |
| if (connector_state->crtc != &crtc->base) |
| continue; |
| |
| if (!check_single_encoder_cloning(state, crtc, encoder)) { |
| drm_dbg_kms(&i915->drm, |
| "[ENCODER:%d:%s] rejecting invalid cloning configuration\n", |
| encoder->base.base.id, encoder->base.name); |
| return -EINVAL; |
| } |
| |
| /* |
| * Determine output_types before calling the .compute_config() |
| * hooks so that the hooks can use this information safely. |
| */ |
| if (encoder->compute_output_type) |
| crtc_state->output_types |= |
| BIT(encoder->compute_output_type(encoder, crtc_state, |
| connector_state)); |
| else |
| crtc_state->output_types |= BIT(encoder->type); |
| } |
| |
| /* Ensure the port clock defaults are reset when retrying. */ |
| crtc_state->port_clock = 0; |
| crtc_state->pixel_multiplier = 1; |
| |
| /* Fill in default crtc timings, allow encoders to overwrite them. */ |
| drm_mode_set_crtcinfo(&crtc_state->hw.adjusted_mode, |
| CRTC_STEREO_DOUBLE); |
| |
| /* Pass our mode to the connectors and the CRTC to give them a chance to |
| * adjust it according to limitations or connector properties, and also |
| * a chance to reject the mode entirely. |
| */ |
| for_each_new_connector_in_state(&state->base, connector, connector_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(connector_state->best_encoder); |
| |
| if (connector_state->crtc != &crtc->base) |
| continue; |
| |
| ret = encoder->compute_config(encoder, crtc_state, |
| connector_state); |
| if (ret == -EDEADLK) |
| return ret; |
| if (ret < 0) { |
| drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] config failure: %d\n", |
| encoder->base.base.id, encoder->base.name, ret); |
| return ret; |
| } |
| } |
| |
| /* Set default port clock if not overwritten by the encoder. Needs to be |
| * done afterwards in case the encoder adjusts the mode. */ |
| if (!crtc_state->port_clock) |
| crtc_state->port_clock = crtc_state->hw.adjusted_mode.crtc_clock |
| * crtc_state->pixel_multiplier; |
| |
| ret = intel_crtc_compute_config(state, crtc); |
| if (ret == -EDEADLK) |
| return ret; |
| if (ret < 0) { |
| drm_dbg_kms(&i915->drm, "[CRTC:%d:%s] config failure: %d\n", |
| crtc->base.base.id, crtc->base.name, ret); |
| return ret; |
| } |
| |
| /* Dithering seems to not pass-through bits correctly when it should, so |
| * only enable it on 6bpc panels and when its not a compliance |
| * test requesting 6bpc video pattern. |
| */ |
| crtc_state->dither = (crtc_state->pipe_bpp == 6*3) && |
| !crtc_state->dither_force_disable; |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] hw max bpp: %i, pipe bpp: %i, dithering: %i\n", |
| crtc->base.base.id, crtc->base.name, |
| base_bpp, crtc_state->pipe_bpp, crtc_state->dither); |
| |
| return 0; |
| } |
| |
| static int |
| intel_modeset_pipe_config_late(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct drm_connector_state *conn_state; |
| struct drm_connector *connector; |
| int i; |
| |
| for_each_new_connector_in_state(&state->base, connector, |
| conn_state, i) { |
| struct intel_encoder *encoder = |
| to_intel_encoder(conn_state->best_encoder); |
| int ret; |
| |
| if (conn_state->crtc != &crtc->base || |
| !encoder->compute_config_late) |
| continue; |
| |
| ret = encoder->compute_config_late(encoder, crtc_state, |
| conn_state); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| bool intel_fuzzy_clock_check(int clock1, int clock2) |
| { |
| int diff; |
| |
| if (clock1 == clock2) |
| return true; |
| |
| if (!clock1 || !clock2) |
| return false; |
| |
| diff = abs(clock1 - clock2); |
| |
| if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105) |
| return true; |
| |
| return false; |
| } |
| |
| static bool |
| intel_compare_link_m_n(const struct intel_link_m_n *m_n, |
| const struct intel_link_m_n *m2_n2) |
| { |
| return m_n->tu == m2_n2->tu && |
| m_n->data_m == m2_n2->data_m && |
| m_n->data_n == m2_n2->data_n && |
| m_n->link_m == m2_n2->link_m && |
| m_n->link_n == m2_n2->link_n; |
| } |
| |
| static bool |
| intel_compare_infoframe(const union hdmi_infoframe *a, |
| const union hdmi_infoframe *b) |
| { |
| return memcmp(a, b, sizeof(*a)) == 0; |
| } |
| |
| static bool |
| intel_compare_dp_vsc_sdp(const struct drm_dp_vsc_sdp *a, |
| const struct drm_dp_vsc_sdp *b) |
| { |
| return a->pixelformat == b->pixelformat && |
| a->colorimetry == b->colorimetry && |
| a->bpc == b->bpc && |
| a->dynamic_range == b->dynamic_range && |
| a->content_type == b->content_type; |
| } |
| |
| static bool |
| intel_compare_dp_as_sdp(const struct drm_dp_as_sdp *a, |
| const struct drm_dp_as_sdp *b) |
| { |
| return a->vtotal == b->vtotal && |
| a->target_rr == b->target_rr && |
| a->duration_incr_ms == b->duration_incr_ms && |
| a->duration_decr_ms == b->duration_decr_ms && |
| a->mode == b->mode; |
| } |
| |
| static bool |
| intel_compare_buffer(const u8 *a, const u8 *b, size_t len) |
| { |
| return memcmp(a, b, len) == 0; |
| } |
| |
| static void __printf(5, 6) |
| pipe_config_mismatch(struct drm_printer *p, bool fastset, |
| const struct intel_crtc *crtc, |
| const char *name, const char *format, ...) |
| { |
| struct va_format vaf; |
| va_list args; |
| |
| va_start(args, format); |
| vaf.fmt = format; |
| vaf.va = &args; |
| |
| if (fastset) |
| drm_printf(p, "[CRTC:%d:%s] fastset requirement not met in %s %pV\n", |
| crtc->base.base.id, crtc->base.name, name, &vaf); |
| else |
| drm_printf(p, "[CRTC:%d:%s] mismatch in %s %pV\n", |
| crtc->base.base.id, crtc->base.name, name, &vaf); |
| |
| va_end(args); |
| } |
| |
| static void |
| pipe_config_infoframe_mismatch(struct drm_printer *p, bool fastset, |
| const struct intel_crtc *crtc, |
| const char *name, |
| const union hdmi_infoframe *a, |
| const union hdmi_infoframe *b) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| const char *loglevel; |
| |
| if (fastset) { |
| if (!drm_debug_enabled(DRM_UT_KMS)) |
| return; |
| |
| loglevel = KERN_DEBUG; |
| } else { |
| loglevel = KERN_ERR; |
| } |
| |
| pipe_config_mismatch(p, fastset, crtc, name, "infoframe"); |
| |
| drm_printf(p, "expected:\n"); |
| hdmi_infoframe_log(loglevel, i915->drm.dev, a); |
| drm_printf(p, "found:\n"); |
| hdmi_infoframe_log(loglevel, i915->drm.dev, b); |
| } |
| |
| static void |
| pipe_config_dp_vsc_sdp_mismatch(struct drm_printer *p, bool fastset, |
| const struct intel_crtc *crtc, |
| const char *name, |
| const struct drm_dp_vsc_sdp *a, |
| const struct drm_dp_vsc_sdp *b) |
| { |
| pipe_config_mismatch(p, fastset, crtc, name, "dp sdp"); |
| |
| drm_printf(p, "expected:\n"); |
| drm_dp_vsc_sdp_log(p, a); |
| drm_printf(p, "found:\n"); |
| drm_dp_vsc_sdp_log(p, b); |
| } |
| |
| static void |
| pipe_config_dp_as_sdp_mismatch(struct drm_i915_private *i915, |
| bool fastset, const char *name, |
| const struct drm_dp_as_sdp *a, |
| const struct drm_dp_as_sdp *b) |
| { |
| struct drm_printer p; |
| |
| if (fastset) { |
| p = drm_dbg_printer(&i915->drm, DRM_UT_KMS, NULL); |
| |
| drm_printf(&p, "fastset requirement not met in %s dp sdp\n", name); |
| } else { |
| p = drm_err_printer(&i915->drm, NULL); |
| |
| drm_printf(&p, "mismatch in %s dp sdp\n", name); |
| } |
| |
| drm_printf(&p, "expected:\n"); |
| drm_dp_as_sdp_log(&p, a); |
| drm_printf(&p, "found:\n"); |
| drm_dp_as_sdp_log(&p, b); |
| } |
| |
| /* Returns the length up to and including the last differing byte */ |
| static size_t |
| memcmp_diff_len(const u8 *a, const u8 *b, size_t len) |
| { |
| int i; |
| |
| for (i = len - 1; i >= 0; i--) { |
| if (a[i] != b[i]) |
| return i + 1; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| pipe_config_buffer_mismatch(struct drm_printer *p, bool fastset, |
| const struct intel_crtc *crtc, |
| const char *name, |
| const u8 *a, const u8 *b, size_t len) |
| { |
| const char *loglevel; |
| |
| if (fastset) { |
| if (!drm_debug_enabled(DRM_UT_KMS)) |
| return; |
| |
| loglevel = KERN_DEBUG; |
| } else { |
| loglevel = KERN_ERR; |
| } |
| |
| pipe_config_mismatch(p, fastset, crtc, name, "buffer"); |
| |
| /* only dump up to the last difference */ |
| len = memcmp_diff_len(a, b, len); |
| |
| print_hex_dump(loglevel, "expected: ", DUMP_PREFIX_NONE, |
| 16, 0, a, len, false); |
| print_hex_dump(loglevel, "found: ", DUMP_PREFIX_NONE, |
| 16, 0, b, len, false); |
| } |
| |
| static void |
| pipe_config_pll_mismatch(struct drm_printer *p, bool fastset, |
| const struct intel_crtc *crtc, |
| const char *name, |
| const struct intel_dpll_hw_state *a, |
| const struct intel_dpll_hw_state *b) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| |
| pipe_config_mismatch(p, fastset, crtc, name, " "); /* stupid -Werror=format-zero-length */ |
| |
| drm_printf(p, "expected:\n"); |
| intel_dpll_dump_hw_state(i915, p, a); |
| drm_printf(p, "found:\n"); |
| intel_dpll_dump_hw_state(i915, p, b); |
| } |
| |
| static void |
| pipe_config_cx0pll_mismatch(struct drm_printer *p, bool fastset, |
| const struct intel_crtc *crtc, |
| const char *name, |
| const struct intel_cx0pll_state *a, |
| const struct intel_cx0pll_state *b) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| char *chipname = a->use_c10 ? "C10" : "C20"; |
| |
| pipe_config_mismatch(p, fastset, crtc, name, chipname); |
| |
| drm_printf(p, "expected:\n"); |
| intel_cx0pll_dump_hw_state(i915, a); |
| drm_printf(p, "found:\n"); |
| intel_cx0pll_dump_hw_state(i915, b); |
| } |
| |
| bool |
| intel_pipe_config_compare(const struct intel_crtc_state *current_config, |
| const struct intel_crtc_state *pipe_config, |
| bool fastset) |
| { |
| struct drm_i915_private *dev_priv = to_i915(current_config->uapi.crtc->dev); |
| struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); |
| struct drm_printer p; |
| bool ret = true; |
| |
| if (fastset) |
| p = drm_dbg_printer(&dev_priv->drm, DRM_UT_KMS, NULL); |
| else |
| p = drm_err_printer(&dev_priv->drm, NULL); |
| |
| #define PIPE_CONF_CHECK_X(name) do { \ |
| if (current_config->name != pipe_config->name) { \ |
| BUILD_BUG_ON_MSG(__same_type(current_config->name, bool), \ |
| __stringify(name) " is bool"); \ |
| pipe_config_mismatch(&p, fastset, crtc, __stringify(name), \ |
| "(expected 0x%08x, found 0x%08x)", \ |
| current_config->name, \ |
| pipe_config->name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_X_WITH_MASK(name, mask) do { \ |
| if ((current_config->name & (mask)) != (pipe_config->name & (mask))) { \ |
| BUILD_BUG_ON_MSG(__same_type(current_config->name, bool), \ |
| __stringify(name) " is bool"); \ |
| pipe_config_mismatch(&p, fastset, crtc, __stringify(name), \ |
| "(expected 0x%08x, found 0x%08x)", \ |
| current_config->name & (mask), \ |
| pipe_config->name & (mask)); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_I(name) do { \ |
| if (current_config->name != pipe_config->name) { \ |
| BUILD_BUG_ON_MSG(__same_type(current_config->name, bool), \ |
| __stringify(name) " is bool"); \ |
| pipe_config_mismatch(&p, fastset, crtc, __stringify(name), \ |
| "(expected %i, found %i)", \ |
| current_config->name, \ |
| pipe_config->name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_LLI(name) do { \ |
| if (current_config->name != pipe_config->name) { \ |
| pipe_config_mismatch(&p, fastset, crtc, __stringify(name), \ |
| "(expected %lli, found %lli)", \ |
| current_config->name, \ |
| pipe_config->name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_BOOL(name) do { \ |
| if (current_config->name != pipe_config->name) { \ |
| BUILD_BUG_ON_MSG(!__same_type(current_config->name, bool), \ |
| __stringify(name) " is not bool"); \ |
| pipe_config_mismatch(&p, fastset, crtc, __stringify(name), \ |
| "(expected %s, found %s)", \ |
| str_yes_no(current_config->name), \ |
| str_yes_no(pipe_config->name)); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_P(name) do { \ |
| if (current_config->name != pipe_config->name) { \ |
| pipe_config_mismatch(&p, fastset, crtc, __stringify(name), \ |
| "(expected %p, found %p)", \ |
| current_config->name, \ |
| pipe_config->name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_M_N(name) do { \ |
| if (!intel_compare_link_m_n(¤t_config->name, \ |
| &pipe_config->name)) { \ |
| pipe_config_mismatch(&p, fastset, crtc, __stringify(name), \ |
| "(expected tu %i data %i/%i link %i/%i, " \ |
| "found tu %i, data %i/%i link %i/%i)", \ |
| current_config->name.tu, \ |
| current_config->name.data_m, \ |
| current_config->name.data_n, \ |
| current_config->name.link_m, \ |
| current_config->name.link_n, \ |
| pipe_config->name.tu, \ |
| pipe_config->name.data_m, \ |
| pipe_config->name.data_n, \ |
| pipe_config->name.link_m, \ |
| pipe_config->name.link_n); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_PLL(name) do { \ |
| if (!intel_dpll_compare_hw_state(dev_priv, ¤t_config->name, \ |
| &pipe_config->name)) { \ |
| pipe_config_pll_mismatch(&p, fastset, crtc, __stringify(name), \ |
| ¤t_config->name, \ |
| &pipe_config->name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_PLL_CX0(name) do { \ |
| if (!intel_cx0pll_compare_hw_state(¤t_config->name, \ |
| &pipe_config->name)) { \ |
| pipe_config_cx0pll_mismatch(&p, fastset, crtc, __stringify(name), \ |
| ¤t_config->name, \ |
| &pipe_config->name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_TIMINGS(name) do { \ |
| PIPE_CONF_CHECK_I(name.crtc_hdisplay); \ |
| PIPE_CONF_CHECK_I(name.crtc_htotal); \ |
| PIPE_CONF_CHECK_I(name.crtc_hblank_start); \ |
| PIPE_CONF_CHECK_I(name.crtc_hblank_end); \ |
| PIPE_CONF_CHECK_I(name.crtc_hsync_start); \ |
| PIPE_CONF_CHECK_I(name.crtc_hsync_end); \ |
| PIPE_CONF_CHECK_I(name.crtc_vdisplay); \ |
| PIPE_CONF_CHECK_I(name.crtc_vblank_start); \ |
| PIPE_CONF_CHECK_I(name.crtc_vsync_start); \ |
| PIPE_CONF_CHECK_I(name.crtc_vsync_end); \ |
| if (!fastset || !pipe_config->update_lrr) { \ |
| PIPE_CONF_CHECK_I(name.crtc_vtotal); \ |
| PIPE_CONF_CHECK_I(name.crtc_vblank_end); \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_RECT(name) do { \ |
| PIPE_CONF_CHECK_I(name.x1); \ |
| PIPE_CONF_CHECK_I(name.x2); \ |
| PIPE_CONF_CHECK_I(name.y1); \ |
| PIPE_CONF_CHECK_I(name.y2); \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_FLAGS(name, mask) do { \ |
| if ((current_config->name ^ pipe_config->name) & (mask)) { \ |
| pipe_config_mismatch(&p, fastset, crtc, __stringify(name), \ |
| "(%x) (expected %i, found %i)", \ |
| (mask), \ |
| current_config->name & (mask), \ |
| pipe_config->name & (mask)); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_INFOFRAME(name) do { \ |
| if (!intel_compare_infoframe(¤t_config->infoframes.name, \ |
| &pipe_config->infoframes.name)) { \ |
| pipe_config_infoframe_mismatch(&p, fastset, crtc, __stringify(name), \ |
| ¤t_config->infoframes.name, \ |
| &pipe_config->infoframes.name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_DP_VSC_SDP(name) do { \ |
| if (!intel_compare_dp_vsc_sdp(¤t_config->infoframes.name, \ |
| &pipe_config->infoframes.name)) { \ |
| pipe_config_dp_vsc_sdp_mismatch(&p, fastset, crtc, __stringify(name), \ |
| ¤t_config->infoframes.name, \ |
| &pipe_config->infoframes.name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_DP_AS_SDP(name) do { \ |
| if (!intel_compare_dp_as_sdp(¤t_config->infoframes.name, \ |
| &pipe_config->infoframes.name)) { \ |
| pipe_config_dp_as_sdp_mismatch(dev_priv, fastset, __stringify(name), \ |
| ¤t_config->infoframes.name, \ |
| &pipe_config->infoframes.name); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_BUFFER(name, len) do { \ |
| BUILD_BUG_ON(sizeof(current_config->name) != (len)); \ |
| BUILD_BUG_ON(sizeof(pipe_config->name) != (len)); \ |
| if (!intel_compare_buffer(current_config->name, pipe_config->name, (len))) { \ |
| pipe_config_buffer_mismatch(&p, fastset, crtc, __stringify(name), \ |
| current_config->name, \ |
| pipe_config->name, \ |
| (len)); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_COLOR_LUT(lut, is_pre_csc_lut) do { \ |
| if (current_config->gamma_mode == pipe_config->gamma_mode && \ |
| !intel_color_lut_equal(current_config, \ |
| current_config->lut, pipe_config->lut, \ |
| is_pre_csc_lut)) { \ |
| pipe_config_mismatch(&p, fastset, crtc, __stringify(lut), \ |
| "hw_state doesn't match sw_state"); \ |
| ret = false; \ |
| } \ |
| } while (0) |
| |
| #define PIPE_CONF_CHECK_CSC(name) do { \ |
| PIPE_CONF_CHECK_X(name.preoff[0]); \ |
| PIPE_CONF_CHECK_X(name.preoff[1]); \ |
| PIPE_CONF_CHECK_X(name.preoff[2]); \ |
| PIPE_CONF_CHECK_X(name.coeff[0]); \ |
| PIPE_CONF_CHECK_X(name.coeff[1]); \ |
| PIPE_CONF_CHECK_X(name.coeff[2]); \ |
| PIPE_CONF_CHECK_X(name.coeff[3]); \ |
| PIPE_CONF_CHECK_X(name.coeff[4]); \ |
| PIPE_CONF_CHECK_X(name.coeff[5]); \ |
| PIPE_CONF_CHECK_X(name.coeff[6]); \ |
| PIPE_CONF_CHECK_X(name.coeff[7]); \ |
| PIPE_CONF_CHECK_X(name.coeff[8]); \ |
| PIPE_CONF_CHECK_X(name.postoff[0]); \ |
| PIPE_CONF_CHECK_X(name.postoff[1]); \ |
| PIPE_CONF_CHECK_X(name.postoff[2]); \ |
| } while (0) |
| |
| #define PIPE_CONF_QUIRK(quirk) \ |
| ((current_config->quirks | pipe_config->quirks) & (quirk)) |
| |
| PIPE_CONF_CHECK_BOOL(hw.enable); |
| PIPE_CONF_CHECK_BOOL(hw.active); |
| |
| PIPE_CONF_CHECK_I(cpu_transcoder); |
| PIPE_CONF_CHECK_I(mst_master_transcoder); |
| |
| PIPE_CONF_CHECK_BOOL(has_pch_encoder); |
| PIPE_CONF_CHECK_I(fdi_lanes); |
| PIPE_CONF_CHECK_M_N(fdi_m_n); |
| |
| PIPE_CONF_CHECK_I(lane_count); |
| PIPE_CONF_CHECK_X(lane_lat_optim_mask); |
| |
| if (HAS_DOUBLE_BUFFERED_M_N(dev_priv)) { |
| if (!fastset || !pipe_config->update_m_n) |
| PIPE_CONF_CHECK_M_N(dp_m_n); |
| } else { |
| PIPE_CONF_CHECK_M_N(dp_m_n); |
| PIPE_CONF_CHECK_M_N(dp_m2_n2); |
| } |
| |
| PIPE_CONF_CHECK_X(output_types); |
| |
| PIPE_CONF_CHECK_I(framestart_delay); |
| PIPE_CONF_CHECK_I(msa_timing_delay); |
| |
| PIPE_CONF_CHECK_TIMINGS(hw.pipe_mode); |
| PIPE_CONF_CHECK_TIMINGS(hw.adjusted_mode); |
| |
| PIPE_CONF_CHECK_I(pixel_multiplier); |
| |
| PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags, |
| DRM_MODE_FLAG_INTERLACE); |
| |
| if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) { |
| PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags, |
| DRM_MODE_FLAG_PHSYNC); |
| PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags, |
| DRM_MODE_FLAG_NHSYNC); |
| PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags, |
| DRM_MODE_FLAG_PVSYNC); |
| PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags, |
| DRM_MODE_FLAG_NVSYNC); |
| } |
| |
| PIPE_CONF_CHECK_I(output_format); |
| PIPE_CONF_CHECK_BOOL(has_hdmi_sink); |
| if ((DISPLAY_VER(dev_priv) < 8 && !IS_HASWELL(dev_priv)) || |
| IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| PIPE_CONF_CHECK_BOOL(limited_color_range); |
| |
| PIPE_CONF_CHECK_BOOL(hdmi_scrambling); |
| PIPE_CONF_CHECK_BOOL(hdmi_high_tmds_clock_ratio); |
| PIPE_CONF_CHECK_BOOL(has_infoframe); |
| PIPE_CONF_CHECK_BOOL(enhanced_framing); |
| PIPE_CONF_CHECK_BOOL(fec_enable); |
| |
| if (!fastset) { |
| PIPE_CONF_CHECK_BOOL(has_audio); |
| PIPE_CONF_CHECK_BUFFER(eld, MAX_ELD_BYTES); |
| } |
| |
| PIPE_CONF_CHECK_X(gmch_pfit.control); |
| /* pfit ratios are autocomputed by the hw on gen4+ */ |
| if (DISPLAY_VER(dev_priv) < 4) |
| PIPE_CONF_CHECK_X(gmch_pfit.pgm_ratios); |
| PIPE_CONF_CHECK_X(gmch_pfit.lvds_border_bits); |
| |
| /* |
| * Changing the EDP transcoder input mux |
| * (A_ONOFF vs. A_ON) requires a full modeset. |
| */ |
| PIPE_CONF_CHECK_BOOL(pch_pfit.force_thru); |
| |
| if (!fastset) { |
| PIPE_CONF_CHECK_RECT(pipe_src); |
| |
| PIPE_CONF_CHECK_BOOL(pch_pfit.enabled); |
| PIPE_CONF_CHECK_RECT(pch_pfit.dst); |
| |
| PIPE_CONF_CHECK_I(scaler_state.scaler_id); |
| PIPE_CONF_CHECK_I(pixel_rate); |
| |
| PIPE_CONF_CHECK_X(gamma_mode); |
| if (IS_CHERRYVIEW(dev_priv)) |
| PIPE_CONF_CHECK_X(cgm_mode); |
| else |
| PIPE_CONF_CHECK_X(csc_mode); |
| PIPE_CONF_CHECK_BOOL(gamma_enable); |
| PIPE_CONF_CHECK_BOOL(csc_enable); |
| PIPE_CONF_CHECK_BOOL(wgc_enable); |
| |
| PIPE_CONF_CHECK_I(linetime); |
| PIPE_CONF_CHECK_I(ips_linetime); |
| |
| PIPE_CONF_CHECK_COLOR_LUT(pre_csc_lut, true); |
| PIPE_CONF_CHECK_COLOR_LUT(post_csc_lut, false); |
| |
| PIPE_CONF_CHECK_CSC(csc); |
| PIPE_CONF_CHECK_CSC(output_csc); |
| } |
| |
| /* |
| * Panel replay has to be enabled before link training. PSR doesn't have |
| * this requirement -> check these only if using panel replay |
| */ |
| if (current_config->active_planes && |
| (current_config->has_panel_replay || |
| pipe_config->has_panel_replay)) { |
| PIPE_CONF_CHECK_BOOL(has_psr); |
| PIPE_CONF_CHECK_BOOL(has_sel_update); |
| PIPE_CONF_CHECK_BOOL(enable_psr2_sel_fetch); |
| PIPE_CONF_CHECK_BOOL(enable_psr2_su_region_et); |
| PIPE_CONF_CHECK_BOOL(has_panel_replay); |
| } |
| |
| PIPE_CONF_CHECK_BOOL(double_wide); |
| |
| if (dev_priv->display.dpll.mgr) |
| PIPE_CONF_CHECK_P(shared_dpll); |
| |
| /* FIXME convert everything over the dpll_mgr */ |
| if (dev_priv->display.dpll.mgr || HAS_GMCH(dev_priv)) |
| PIPE_CONF_CHECK_PLL(dpll_hw_state); |
| |
| /* FIXME convert MTL+ platforms over to dpll_mgr */ |
| if (DISPLAY_VER(dev_priv) >= 14) |
| PIPE_CONF_CHECK_PLL_CX0(dpll_hw_state.cx0pll); |
| |
| PIPE_CONF_CHECK_X(dsi_pll.ctrl); |
| PIPE_CONF_CHECK_X(dsi_pll.div); |
| |
| if (IS_G4X(dev_priv) || DISPLAY_VER(dev_priv) >= 5) |
| PIPE_CONF_CHECK_I(pipe_bpp); |
| |
| if (!fastset || !pipe_config->update_m_n) { |
| PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_clock); |
| PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_clock); |
| } |
| PIPE_CONF_CHECK_I(port_clock); |
| |
| PIPE_CONF_CHECK_I(min_voltage_level); |
| |
| if (current_config->has_psr || pipe_config->has_psr) |
| PIPE_CONF_CHECK_X_WITH_MASK(infoframes.enable, |
| ~intel_hdmi_infoframe_enable(DP_SDP_VSC)); |
| else |
| PIPE_CONF_CHECK_X(infoframes.enable); |
| |
| PIPE_CONF_CHECK_X(infoframes.gcp); |
| PIPE_CONF_CHECK_INFOFRAME(avi); |
| PIPE_CONF_CHECK_INFOFRAME(spd); |
| PIPE_CONF_CHECK_INFOFRAME(hdmi); |
| PIPE_CONF_CHECK_INFOFRAME(drm); |
| PIPE_CONF_CHECK_DP_VSC_SDP(vsc); |
| PIPE_CONF_CHECK_DP_AS_SDP(as_sdp); |
| |
| PIPE_CONF_CHECK_X(sync_mode_slaves_mask); |
| PIPE_CONF_CHECK_I(master_transcoder); |
| PIPE_CONF_CHECK_X(joiner_pipes); |
| |
| PIPE_CONF_CHECK_BOOL(dsc.config.block_pred_enable); |
| PIPE_CONF_CHECK_BOOL(dsc.config.convert_rgb); |
| PIPE_CONF_CHECK_BOOL(dsc.config.simple_422); |
| PIPE_CONF_CHECK_BOOL(dsc.config.native_422); |
| PIPE_CONF_CHECK_BOOL(dsc.config.native_420); |
| PIPE_CONF_CHECK_BOOL(dsc.config.vbr_enable); |
| PIPE_CONF_CHECK_I(dsc.config.line_buf_depth); |
| PIPE_CONF_CHECK_I(dsc.config.bits_per_component); |
| PIPE_CONF_CHECK_I(dsc.config.pic_width); |
| PIPE_CONF_CHECK_I(dsc.config.pic_height); |
| PIPE_CONF_CHECK_I(dsc.config.slice_width); |
| PIPE_CONF_CHECK_I(dsc.config.slice_height); |
| PIPE_CONF_CHECK_I(dsc.config.initial_dec_delay); |
| PIPE_CONF_CHECK_I(dsc.config.initial_xmit_delay); |
| PIPE_CONF_CHECK_I(dsc.config.scale_decrement_interval); |
| PIPE_CONF_CHECK_I(dsc.config.scale_increment_interval); |
| PIPE_CONF_CHECK_I(dsc.config.initial_scale_value); |
| PIPE_CONF_CHECK_I(dsc.config.first_line_bpg_offset); |
| PIPE_CONF_CHECK_I(dsc.config.flatness_min_qp); |
| PIPE_CONF_CHECK_I(dsc.config.flatness_max_qp); |
| PIPE_CONF_CHECK_I(dsc.config.slice_bpg_offset); |
| PIPE_CONF_CHECK_I(dsc.config.nfl_bpg_offset); |
| PIPE_CONF_CHECK_I(dsc.config.initial_offset); |
| PIPE_CONF_CHECK_I(dsc.config.final_offset); |
| PIPE_CONF_CHECK_I(dsc.config.rc_model_size); |
| PIPE_CONF_CHECK_I(dsc.config.rc_quant_incr_limit0); |
| PIPE_CONF_CHECK_I(dsc.config.rc_quant_incr_limit1); |
| PIPE_CONF_CHECK_I(dsc.config.slice_chunk_size); |
| PIPE_CONF_CHECK_I(dsc.config.second_line_bpg_offset); |
| PIPE_CONF_CHECK_I(dsc.config.nsl_bpg_offset); |
| |
| PIPE_CONF_CHECK_BOOL(dsc.compression_enable); |
| PIPE_CONF_CHECK_BOOL(dsc.dsc_split); |
| PIPE_CONF_CHECK_I(dsc.compressed_bpp_x16); |
| |
| PIPE_CONF_CHECK_BOOL(splitter.enable); |
| PIPE_CONF_CHECK_I(splitter.link_count); |
| PIPE_CONF_CHECK_I(splitter.pixel_overlap); |
| |
| if (!fastset) { |
| PIPE_CONF_CHECK_BOOL(vrr.enable); |
| PIPE_CONF_CHECK_I(vrr.vmin); |
| PIPE_CONF_CHECK_I(vrr.vmax); |
| PIPE_CONF_CHECK_I(vrr.flipline); |
| PIPE_CONF_CHECK_I(vrr.pipeline_full); |
| PIPE_CONF_CHECK_I(vrr.guardband); |
| PIPE_CONF_CHECK_I(vrr.vsync_start); |
| PIPE_CONF_CHECK_I(vrr.vsync_end); |
| PIPE_CONF_CHECK_LLI(cmrr.cmrr_m); |
| PIPE_CONF_CHECK_LLI(cmrr.cmrr_n); |
| PIPE_CONF_CHECK_BOOL(cmrr.enable); |
| } |
| |
| #undef PIPE_CONF_CHECK_X |
| #undef PIPE_CONF_CHECK_I |
| #undef PIPE_CONF_CHECK_LLI |
| #undef PIPE_CONF_CHECK_BOOL |
| #undef PIPE_CONF_CHECK_P |
| #undef PIPE_CONF_CHECK_FLAGS |
| #undef PIPE_CONF_CHECK_COLOR_LUT |
| #undef PIPE_CONF_CHECK_TIMINGS |
| #undef PIPE_CONF_CHECK_RECT |
| #undef PIPE_CONF_QUIRK |
| |
| return ret; |
| } |
| |
| static void |
| intel_verify_planes(struct intel_atomic_state *state) |
| { |
| struct intel_plane *plane; |
| const struct intel_plane_state *plane_state; |
| int i; |
| |
| for_each_new_intel_plane_in_state(state, plane, |
| plane_state, i) |
| assert_plane(plane, plane_state->planar_slave || |
| plane_state->uapi.visible); |
| } |
| |
| static int intel_modeset_pipe(struct intel_atomic_state *state, |
| struct intel_crtc_state *crtc_state, |
| const char *reason) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| int ret; |
| |
| drm_dbg_kms(&i915->drm, "[CRTC:%d:%s] Full modeset due to %s\n", |
| crtc->base.base.id, crtc->base.name, reason); |
| |
| ret = drm_atomic_add_affected_connectors(&state->base, |
| &crtc->base); |
| if (ret) |
| return ret; |
| |
| ret = intel_dp_tunnel_atomic_add_state_for_crtc(state, crtc); |
| if (ret) |
| return ret; |
| |
| ret = intel_dp_mst_add_topology_state_for_crtc(state, crtc); |
| if (ret) |
| return ret; |
| |
| ret = intel_atomic_add_affected_planes(state, crtc); |
| if (ret) |
| return ret; |
| |
| crtc_state->uapi.mode_changed = true; |
| |
| return 0; |
| } |
| |
| /** |
| * intel_modeset_pipes_in_mask_early - force a full modeset on a set of pipes |
| * @state: intel atomic state |
| * @reason: the reason for the full modeset |
| * @mask: mask of pipes to modeset |
| * |
| * Add pipes in @mask to @state and force a full modeset on the enabled ones |
| * due to the description in @reason. |
| * This function can be called only before new plane states are computed. |
| * |
| * Returns 0 in case of success, negative error code otherwise. |
| */ |
| int intel_modeset_pipes_in_mask_early(struct intel_atomic_state *state, |
| const char *reason, u8 mask) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct intel_crtc *crtc; |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, crtc, mask) { |
| struct intel_crtc_state *crtc_state; |
| int ret; |
| |
| crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); |
| if (IS_ERR(crtc_state)) |
| return PTR_ERR(crtc_state); |
| |
| if (!crtc_state->hw.enable || |
| intel_crtc_needs_modeset(crtc_state)) |
| continue; |
| |
| ret = intel_modeset_pipe(state, crtc_state, reason); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| intel_crtc_flag_modeset(struct intel_crtc_state *crtc_state) |
| { |
| crtc_state->uapi.mode_changed = true; |
| |
| crtc_state->update_pipe = false; |
| crtc_state->update_m_n = false; |
| crtc_state->update_lrr = false; |
| } |
| |
| /** |
| * intel_modeset_all_pipes_late - force a full modeset on all pipes |
| * @state: intel atomic state |
| * @reason: the reason for the full modeset |
| * |
| * Add all pipes to @state and force a full modeset on the active ones due to |
| * the description in @reason. |
| * This function can be called only after new plane states are computed already. |
| * |
| * Returns 0 in case of success, negative error code otherwise. |
| */ |
| int intel_modeset_all_pipes_late(struct intel_atomic_state *state, |
| const char *reason) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_crtc *crtc; |
| |
| for_each_intel_crtc(&dev_priv->drm, crtc) { |
| struct intel_crtc_state *crtc_state; |
| int ret; |
| |
| crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); |
| if (IS_ERR(crtc_state)) |
| return PTR_ERR(crtc_state); |
| |
| if (!crtc_state->hw.active || |
| intel_crtc_needs_modeset(crtc_state)) |
| continue; |
| |
| ret = intel_modeset_pipe(state, crtc_state, reason); |
| if (ret) |
| return ret; |
| |
| intel_crtc_flag_modeset(crtc_state); |
| |
| crtc_state->update_planes |= crtc_state->active_planes; |
| crtc_state->async_flip_planes = 0; |
| crtc_state->do_async_flip = false; |
| } |
| |
| return 0; |
| } |
| |
| int intel_modeset_commit_pipes(struct drm_i915_private *i915, |
| u8 pipe_mask, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct drm_atomic_state *state; |
| struct intel_crtc *crtc; |
| int ret; |
| |
| state = drm_atomic_state_alloc(&i915->drm); |
| if (!state) |
| return -ENOMEM; |
| |
| state->acquire_ctx = ctx; |
| to_intel_atomic_state(state)->internal = true; |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, crtc, pipe_mask) { |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_crtc_state(state, crtc); |
| |
| if (IS_ERR(crtc_state)) { |
| ret = PTR_ERR(crtc_state); |
| goto out; |
| } |
| |
| crtc_state->uapi.connectors_changed = true; |
| } |
| |
| ret = drm_atomic_commit(state); |
| out: |
| drm_atomic_state_put(state); |
| |
| return ret; |
| } |
| |
| /* |
| * This implements the workaround described in the "notes" section of the mode |
| * set sequence documentation. When going from no pipes or single pipe to |
| * multiple pipes, and planes are enabled after the pipe, we need to wait at |
| * least 2 vblanks on the first pipe before enabling planes on the second pipe. |
| */ |
| static int hsw_mode_set_planes_workaround(struct intel_atomic_state *state) |
| { |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| struct intel_crtc_state *first_crtc_state = NULL; |
| struct intel_crtc_state *other_crtc_state = NULL; |
| enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE; |
| int i; |
| |
| /* look at all crtc's that are going to be enabled in during modeset */ |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { |
| if (!crtc_state->hw.active || |
| !intel_crtc_needs_modeset(crtc_state)) |
| continue; |
| |
| if (first_crtc_state) { |
| other_crtc_state = crtc_state; |
| break; |
| } else { |
| first_crtc_state = crtc_state; |
| first_pipe = crtc->pipe; |
| } |
| } |
| |
| /* No workaround needed? */ |
| if (!first_crtc_state) |
| return 0; |
| |
| /* w/a possibly needed, check how many crtc's are already enabled. */ |
| for_each_intel_crtc(state->base.dev, crtc) { |
| crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); |
| if (IS_ERR(crtc_state)) |
| return PTR_ERR(crtc_state); |
| |
| crtc_state->hsw_workaround_pipe = INVALID_PIPE; |
| |
| if (!crtc_state->hw.active || |
| intel_crtc_needs_modeset(crtc_state)) |
| continue; |
| |
| /* 2 or more enabled crtcs means no need for w/a */ |
| if (enabled_pipe != INVALID_PIPE) |
| return 0; |
| |
| enabled_pipe = crtc->pipe; |
| } |
| |
| if (enabled_pipe != INVALID_PIPE) |
| first_crtc_state->hsw_workaround_pipe = enabled_pipe; |
| else if (other_crtc_state) |
| other_crtc_state->hsw_workaround_pipe = first_pipe; |
| |
| return 0; |
| } |
| |
| u8 intel_calc_active_pipes(struct intel_atomic_state *state, |
| u8 active_pipes) |
| { |
| const struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { |
| if (crtc_state->hw.active) |
| active_pipes |= BIT(crtc->pipe); |
| else |
| active_pipes &= ~BIT(crtc->pipe); |
| } |
| |
| return active_pipes; |
| } |
| |
| static int intel_modeset_checks(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| |
| state->modeset = true; |
| |
| if (IS_HASWELL(dev_priv)) |
| return hsw_mode_set_planes_workaround(state); |
| |
| return 0; |
| } |
| |
| static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_state, |
| struct intel_crtc_state *new_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| |
| /* only allow LRR when the timings stay within the VRR range */ |
| if (old_crtc_state->vrr.in_range != new_crtc_state->vrr.in_range) |
| new_crtc_state->update_lrr = false; |
| |
| if (!intel_pipe_config_compare(old_crtc_state, new_crtc_state, true)) |
| drm_dbg_kms(&i915->drm, "[CRTC:%d:%s] fastset requirement not met, forcing full modeset\n", |
| crtc->base.base.id, crtc->base.name); |
| else |
| new_crtc_state->uapi.mode_changed = false; |
| |
| if (intel_compare_link_m_n(&old_crtc_state->dp_m_n, |
| &new_crtc_state->dp_m_n)) |
| new_crtc_state->update_m_n = false; |
| |
| if ((old_crtc_state->hw.adjusted_mode.crtc_vtotal == new_crtc_state->hw.adjusted_mode.crtc_vtotal && |
| old_crtc_state->hw.adjusted_mode.crtc_vblank_end == new_crtc_state->hw.adjusted_mode.crtc_vblank_end)) |
| new_crtc_state->update_lrr = false; |
| |
| if (intel_crtc_needs_modeset(new_crtc_state)) |
| intel_crtc_flag_modeset(new_crtc_state); |
| else |
| new_crtc_state->update_pipe = true; |
| } |
| |
| static int intel_crtc_add_planes_to_state(struct intel_atomic_state *state, |
| struct intel_crtc *crtc, |
| u8 plane_ids_mask) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_plane *plane; |
| |
| for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) { |
| struct intel_plane_state *plane_state; |
| |
| if ((plane_ids_mask & BIT(plane->id)) == 0) |
| continue; |
| |
| plane_state = intel_atomic_get_plane_state(state, plane); |
| if (IS_ERR(plane_state)) |
| return PTR_ERR(plane_state); |
| } |
| |
| return 0; |
| } |
| |
| int intel_atomic_add_affected_planes(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| |
| return intel_crtc_add_planes_to_state(state, crtc, |
| old_crtc_state->enabled_planes | |
| new_crtc_state->enabled_planes); |
| } |
| |
| static bool active_planes_affects_min_cdclk(struct drm_i915_private *dev_priv) |
| { |
| /* See {hsw,vlv,ivb}_plane_ratio() */ |
| return IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv) || |
| IS_CHERRYVIEW(dev_priv) || IS_VALLEYVIEW(dev_priv) || |
| IS_IVYBRIDGE(dev_priv); |
| } |
| |
| static int intel_crtc_add_joiner_planes(struct intel_atomic_state *state, |
| struct intel_crtc *crtc, |
| struct intel_crtc *other) |
| { |
| const struct intel_plane_state __maybe_unused *plane_state; |
| struct intel_plane *plane; |
| u8 plane_ids = 0; |
| int i; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| if (plane->pipe == crtc->pipe) |
| plane_ids |= BIT(plane->id); |
| } |
| |
| return intel_crtc_add_planes_to_state(state, other, plane_ids); |
| } |
| |
| static int intel_joiner_add_affected_planes(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { |
| struct intel_crtc *other; |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, other, |
| crtc_state->joiner_pipes) { |
| int ret; |
| |
| if (crtc == other) |
| continue; |
| |
| ret = intel_crtc_add_joiner_planes(state, crtc, other); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int intel_atomic_check_planes(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_crtc_state *old_crtc_state, *new_crtc_state; |
| struct intel_plane_state __maybe_unused *plane_state; |
| struct intel_plane *plane; |
| struct intel_crtc *crtc; |
| int i, ret; |
| |
| ret = icl_add_linked_planes(state); |
| if (ret) |
| return ret; |
| |
| ret = intel_joiner_add_affected_planes(state); |
| if (ret) |
| return ret; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| ret = intel_plane_atomic_check(state, plane); |
| if (ret) { |
| drm_dbg_atomic(&dev_priv->drm, |
| "[PLANE:%d:%s] atomic driver check failed\n", |
| plane->base.base.id, plane->base.name); |
| return ret; |
| } |
| } |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| u8 old_active_planes, new_active_planes; |
| |
| ret = icl_check_nv12_planes(state, crtc); |
| if (ret) |
| return ret; |
| |
| /* |
| * On some platforms the number of active planes affects |
| * the planes' minimum cdclk calculation. Add such planes |
| * to the state before we compute the minimum cdclk. |
| */ |
| if (!active_planes_affects_min_cdclk(dev_priv)) |
| continue; |
| |
| old_active_planes = old_crtc_state->active_planes & ~BIT(PLANE_CURSOR); |
| new_active_planes = new_crtc_state->active_planes & ~BIT(PLANE_CURSOR); |
| |
| if (hweight8(old_active_planes) == hweight8(new_active_planes)) |
| continue; |
| |
| ret = intel_crtc_add_planes_to_state(state, crtc, new_active_planes); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int intel_atomic_check_crtcs(struct intel_atomic_state *state) |
| { |
| struct intel_crtc_state __maybe_unused *crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| int ret; |
| |
| ret = intel_crtc_atomic_check(state, crtc); |
| if (ret) { |
| drm_dbg_atomic(&i915->drm, |
| "[CRTC:%d:%s] atomic driver check failed\n", |
| crtc->base.base.id, crtc->base.name); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static bool intel_cpu_transcoders_need_modeset(struct intel_atomic_state *state, |
| u8 transcoders) |
| { |
| const struct intel_crtc_state *new_crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (new_crtc_state->hw.enable && |
| transcoders & BIT(new_crtc_state->cpu_transcoder) && |
| intel_crtc_needs_modeset(new_crtc_state)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static bool intel_pipes_need_modeset(struct intel_atomic_state *state, |
| u8 pipes) |
| { |
| const struct intel_crtc_state *new_crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (new_crtc_state->hw.enable && |
| pipes & BIT(crtc->pipe) && |
| intel_crtc_needs_modeset(new_crtc_state)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static int intel_atomic_check_joiner(struct intel_atomic_state *state, |
| struct intel_crtc *primary_crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct intel_crtc_state *primary_crtc_state = |
| intel_atomic_get_new_crtc_state(state, primary_crtc); |
| struct intel_crtc *secondary_crtc; |
| |
| if (!primary_crtc_state->joiner_pipes) |
| return 0; |
| |
| /* sanity check */ |
| if (drm_WARN_ON(&i915->drm, |
| primary_crtc->pipe != joiner_primary_pipe(primary_crtc_state))) |
| return -EINVAL; |
| |
| if (primary_crtc_state->joiner_pipes & ~joiner_pipes(i915)) { |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] Cannot act as joiner primary " |
| "(need 0x%x as pipes, only 0x%x possible)\n", |
| primary_crtc->base.base.id, primary_crtc->base.name, |
| primary_crtc_state->joiner_pipes, joiner_pipes(i915)); |
| return -EINVAL; |
| } |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, secondary_crtc, |
| intel_crtc_joiner_secondary_pipes(primary_crtc_state)) { |
| struct intel_crtc_state *secondary_crtc_state; |
| int ret; |
| |
| secondary_crtc_state = intel_atomic_get_crtc_state(&state->base, secondary_crtc); |
| if (IS_ERR(secondary_crtc_state)) |
| return PTR_ERR(secondary_crtc_state); |
| |
| /* primary being enabled, secondary was already configured? */ |
| if (secondary_crtc_state->uapi.enable) { |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] secondary is enabled as normal CRTC, but " |
| "[CRTC:%d:%s] claiming this CRTC for joiner.\n", |
| secondary_crtc->base.base.id, secondary_crtc->base.name, |
| primary_crtc->base.base.id, primary_crtc->base.name); |
| return -EINVAL; |
| } |
| |
| /* |
| * The state copy logic assumes the primary crtc gets processed |
| * before the secondary crtc during the main compute_config loop. |
| * This works because the crtcs are created in pipe order, |
| * and the hardware requires primary pipe < secondary pipe as well. |
| * Should that change we need to rethink the logic. |
| */ |
| if (WARN_ON(drm_crtc_index(&primary_crtc->base) > |
| drm_crtc_index(&secondary_crtc->base))) |
| return -EINVAL; |
| |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] Used as secondary for joiner primary [CRTC:%d:%s]\n", |
| secondary_crtc->base.base.id, secondary_crtc->base.name, |
| primary_crtc->base.base.id, primary_crtc->base.name); |
| |
| secondary_crtc_state->joiner_pipes = |
| primary_crtc_state->joiner_pipes; |
| |
| ret = copy_joiner_crtc_state_modeset(state, secondary_crtc); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void kill_joiner_secondaries(struct intel_atomic_state *state, |
| struct intel_crtc *primary_crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct intel_crtc_state *primary_crtc_state = |
| intel_atomic_get_new_crtc_state(state, primary_crtc); |
| struct intel_crtc *secondary_crtc; |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, secondary_crtc, |
| intel_crtc_joiner_secondary_pipes(primary_crtc_state)) { |
| struct intel_crtc_state *secondary_crtc_state = |
| intel_atomic_get_new_crtc_state(state, secondary_crtc); |
| |
| secondary_crtc_state->joiner_pipes = 0; |
| |
| intel_crtc_copy_uapi_to_hw_state_modeset(state, secondary_crtc); |
| } |
| |
| primary_crtc_state->joiner_pipes = 0; |
| } |
| |
| /** |
| * DOC: asynchronous flip implementation |
| * |
| * Asynchronous page flip is the implementation for the DRM_MODE_PAGE_FLIP_ASYNC |
| * flag. Currently async flip is only supported via the drmModePageFlip IOCTL. |
| * Correspondingly, support is currently added for primary plane only. |
| * |
| * Async flip can only change the plane surface address, so anything else |
| * changing is rejected from the intel_async_flip_check_hw() function. |
| * Once this check is cleared, flip done interrupt is enabled using |
| * the intel_crtc_enable_flip_done() function. |
| * |
| * As soon as the surface address register is written, flip done interrupt is |
| * generated and the requested events are sent to the usersapce in the interrupt |
| * handler itself. The timestamp and sequence sent during the flip done event |
| * correspond to the last vblank and have no relation to the actual time when |
| * the flip done event was sent. |
| */ |
| static int intel_async_flip_check_uapi(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| const struct intel_plane_state *old_plane_state; |
| struct intel_plane_state *new_plane_state; |
| struct intel_plane *plane; |
| int i; |
| |
| if (!new_crtc_state->uapi.async_flip) |
| return 0; |
| |
| if (!new_crtc_state->uapi.active) { |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] not active\n", |
| crtc->base.base.id, crtc->base.name); |
| return -EINVAL; |
| } |
| |
| if (intel_crtc_needs_modeset(new_crtc_state)) { |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] modeset required\n", |
| crtc->base.base.id, crtc->base.name); |
| return -EINVAL; |
| } |
| |
| /* |
| * FIXME: joiner+async flip is busted currently. |
| * Remove this check once the issues are fixed. |
| */ |
| if (new_crtc_state->joiner_pipes) { |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] async flip disallowed with joiner\n", |
| crtc->base.base.id, crtc->base.name); |
| return -EINVAL; |
| } |
| |
| for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state, |
| new_plane_state, i) { |
| if (plane->pipe != crtc->pipe) |
| continue; |
| |
| /* |
| * TODO: Async flip is only supported through the page flip IOCTL |
| * as of now. So support currently added for primary plane only. |
| * Support for other planes on platforms on which supports |
| * this(vlv/chv and icl+) should be added when async flip is |
| * enabled in the atomic IOCTL path. |
| */ |
| if (!plane->async_flip) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] async flip not supported\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| |
| if (!old_plane_state->uapi.fb || !new_plane_state->uapi.fb) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] no old or new framebuffer\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int intel_async_flip_check_hw(struct intel_atomic_state *state, struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state, *new_crtc_state; |
| const struct intel_plane_state *new_plane_state, *old_plane_state; |
| struct intel_plane *plane; |
| int i; |
| |
| old_crtc_state = intel_atomic_get_old_crtc_state(state, crtc); |
| new_crtc_state = intel_atomic_get_new_crtc_state(state, crtc); |
| |
| if (!new_crtc_state->uapi.async_flip) |
| return 0; |
| |
| if (!new_crtc_state->hw.active) { |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] not active\n", |
| crtc->base.base.id, crtc->base.name); |
| return -EINVAL; |
| } |
| |
| if (intel_crtc_needs_modeset(new_crtc_state)) { |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] modeset required\n", |
| crtc->base.base.id, crtc->base.name); |
| return -EINVAL; |
| } |
| |
| if (old_crtc_state->active_planes != new_crtc_state->active_planes) { |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] Active planes cannot be in async flip\n", |
| crtc->base.base.id, crtc->base.name); |
| return -EINVAL; |
| } |
| |
| for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state, |
| new_plane_state, i) { |
| if (plane->pipe != crtc->pipe) |
| continue; |
| |
| /* |
| * Only async flip capable planes should be in the state |
| * if we're really about to ask the hardware to perform |
| * an async flip. We should never get this far otherwise. |
| */ |
| if (drm_WARN_ON(&i915->drm, |
| new_crtc_state->do_async_flip && !plane->async_flip)) |
| return -EINVAL; |
| |
| /* |
| * Only check async flip capable planes other planes |
| * may be involved in the initial commit due to |
| * the wm0/ddb optimization. |
| * |
| * TODO maybe should track which planes actually |
| * were requested to do the async flip... |
| */ |
| if (!plane->async_flip) |
| continue; |
| |
| /* |
| * FIXME: This check is kept generic for all platforms. |
| * Need to verify this for all gen9 platforms to enable |
| * this selectively if required. |
| */ |
| switch (new_plane_state->hw.fb->modifier) { |
| case DRM_FORMAT_MOD_LINEAR: |
| /* |
| * FIXME: Async on Linear buffer is supported on ICL as |
| * but with additional alignment and fbc restrictions |
| * need to be taken care of. These aren't applicable for |
| * gen12+. |
| */ |
| if (DISPLAY_VER(i915) < 12) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] Modifier 0x%llx does not support async flip on display ver %d\n", |
| plane->base.base.id, plane->base.name, |
| new_plane_state->hw.fb->modifier, DISPLAY_VER(i915)); |
| return -EINVAL; |
| } |
| break; |
| |
| case I915_FORMAT_MOD_X_TILED: |
| case I915_FORMAT_MOD_Y_TILED: |
| case I915_FORMAT_MOD_Yf_TILED: |
| case I915_FORMAT_MOD_4_TILED: |
| break; |
| default: |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] Modifier 0x%llx does not support async flip\n", |
| plane->base.base.id, plane->base.name, |
| new_plane_state->hw.fb->modifier); |
| return -EINVAL; |
| } |
| |
| if (new_plane_state->hw.fb->format->num_planes > 1) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] Planar formats do not support async flips\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| |
| /* |
| * We turn the first async flip request into a sync flip |
| * so that we can reconfigure the plane (eg. change modifier). |
| */ |
| if (!new_crtc_state->do_async_flip) |
| continue; |
| |
| if (old_plane_state->view.color_plane[0].mapping_stride != |
| new_plane_state->view.color_plane[0].mapping_stride) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] Stride cannot be changed in async flip\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.fb->modifier != |
| new_plane_state->hw.fb->modifier) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] Modifier cannot be changed in async flip\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.fb->format != |
| new_plane_state->hw.fb->format) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] Pixel format cannot be changed in async flip\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.rotation != |
| new_plane_state->hw.rotation) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] Rotation cannot be changed in async flip\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| |
| if (!drm_rect_equals(&old_plane_state->uapi.src, &new_plane_state->uapi.src) || |
| !drm_rect_equals(&old_plane_state->uapi.dst, &new_plane_state->uapi.dst)) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] Size/co-ordinates cannot be changed in async flip\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.alpha != new_plane_state->hw.alpha) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANES:%d:%s] Alpha value cannot be changed in async flip\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.pixel_blend_mode != |
| new_plane_state->hw.pixel_blend_mode) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] Pixel blend mode cannot be changed in async flip\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.color_encoding != new_plane_state->hw.color_encoding) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] Color encoding cannot be changed in async flip\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| |
| if (old_plane_state->hw.color_range != new_plane_state->hw.color_range) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] Color range cannot be changed in async flip\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| |
| /* plane decryption is allow to change only in synchronous flips */ |
| if (old_plane_state->decrypt != new_plane_state->decrypt) { |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] Decryption cannot be changed in async flip\n", |
| plane->base.base.id, plane->base.name); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int intel_joiner_add_affected_crtcs(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| u8 affected_pipes = 0; |
| u8 modeset_pipes = 0; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { |
| affected_pipes |= crtc_state->joiner_pipes; |
| if (intel_crtc_needs_modeset(crtc_state)) |
| modeset_pipes |= crtc_state->joiner_pipes; |
| } |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, crtc, affected_pipes) { |
| crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); |
| if (IS_ERR(crtc_state)) |
| return PTR_ERR(crtc_state); |
| } |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, crtc, modeset_pipes) { |
| int ret; |
| |
| crtc_state = intel_atomic_get_new_crtc_state(state, crtc); |
| |
| crtc_state->uapi.mode_changed = true; |
| |
| ret = drm_atomic_add_affected_connectors(&state->base, &crtc->base); |
| if (ret) |
| return ret; |
| |
| ret = intel_atomic_add_affected_planes(state, crtc); |
| if (ret) |
| return ret; |
| } |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { |
| /* Kill old joiner link, we may re-establish afterwards */ |
| if (intel_crtc_needs_modeset(crtc_state) && |
| intel_crtc_is_joiner_primary(crtc_state)) |
| kill_joiner_secondaries(state, crtc); |
| } |
| |
| return 0; |
| } |
| |
| static int intel_atomic_check_config(struct intel_atomic_state *state, |
| struct intel_link_bw_limits *limits, |
| enum pipe *failed_pipe) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct intel_crtc_state *new_crtc_state; |
| struct intel_crtc *crtc; |
| int ret; |
| int i; |
| |
| *failed_pipe = INVALID_PIPE; |
| |
| ret = intel_joiner_add_affected_crtcs(state); |
| if (ret) |
| return ret; |
| |
| ret = intel_fdi_add_affected_crtcs(state); |
| if (ret) |
| return ret; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (!intel_crtc_needs_modeset(new_crtc_state)) { |
| if (intel_crtc_is_joiner_secondary(new_crtc_state)) |
| copy_joiner_crtc_state_nomodeset(state, crtc); |
| else |
| intel_crtc_copy_uapi_to_hw_state_nomodeset(state, crtc); |
| continue; |
| } |
| |
| if (drm_WARN_ON(&i915->drm, intel_crtc_is_joiner_secondary(new_crtc_state))) |
| continue; |
| |
| ret = intel_crtc_prepare_cleared_state(state, crtc); |
| if (ret) |
| goto fail; |
| |
| if (!new_crtc_state->hw.enable) |
| continue; |
| |
| ret = intel_modeset_pipe_config(state, crtc, limits); |
| if (ret) |
| goto fail; |
| } |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (!intel_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| if (drm_WARN_ON(&i915->drm, intel_crtc_is_joiner_secondary(new_crtc_state))) |
| continue; |
| |
| if (!new_crtc_state->hw.enable) |
| continue; |
| |
| ret = intel_modeset_pipe_config_late(state, crtc); |
| if (ret) |
| goto fail; |
| } |
| |
| fail: |
| if (ret) |
| *failed_pipe = crtc->pipe; |
| |
| return ret; |
| } |
| |
| static int intel_atomic_check_config_and_link(struct intel_atomic_state *state) |
| { |
| struct intel_link_bw_limits new_limits; |
| struct intel_link_bw_limits old_limits; |
| int ret; |
| |
| intel_link_bw_init_limits(state, &new_limits); |
| old_limits = new_limits; |
| |
| while (true) { |
| enum pipe failed_pipe; |
| |
| ret = intel_atomic_check_config(state, &new_limits, |
| &failed_pipe); |
| if (ret) { |
| /* |
| * The bpp limit for a pipe is below the minimum it supports, set the |
| * limit to the minimum and recalculate the config. |
| */ |
| if (ret == -EINVAL && |
| intel_link_bw_set_bpp_limit_for_pipe(state, |
| &old_limits, |
| &new_limits, |
| failed_pipe)) |
| continue; |
| |
| break; |
| } |
| |
| old_limits = new_limits; |
| |
| ret = intel_link_bw_atomic_check(state, &new_limits); |
| if (ret != -EAGAIN) |
| break; |
| } |
| |
| return ret; |
| } |
| /** |
| * intel_atomic_check - validate state object |
| * @dev: drm device |
| * @_state: state to validate |
| */ |
| int intel_atomic_check(struct drm_device *dev, |
| struct drm_atomic_state *_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_atomic_state *state = to_intel_atomic_state(_state); |
| struct intel_crtc_state *old_crtc_state, *new_crtc_state; |
| struct intel_crtc *crtc; |
| int ret, i; |
| bool any_ms = false; |
| |
| if (!intel_display_driver_check_access(dev_priv)) |
| return -ENODEV; |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| /* |
| * crtc's state no longer considered to be inherited |
| * after the first userspace/client initiated commit. |
| */ |
| if (!state->internal) |
| new_crtc_state->inherited = false; |
| |
| if (new_crtc_state->inherited != old_crtc_state->inherited) |
| new_crtc_state->uapi.mode_changed = true; |
| |
| if (new_crtc_state->uapi.scaling_filter != |
| old_crtc_state->uapi.scaling_filter) |
| new_crtc_state->uapi.mode_changed = true; |
| } |
| |
| intel_vrr_check_modeset(state); |
| |
| ret = drm_atomic_helper_check_modeset(dev, &state->base); |
| if (ret) |
| goto fail; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| ret = intel_async_flip_check_uapi(state, crtc); |
| if (ret) |
| return ret; |
| } |
| |
| ret = intel_atomic_check_config_and_link(state); |
| if (ret) |
| goto fail; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (!intel_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| if (intel_crtc_is_joiner_secondary(new_crtc_state)) { |
| drm_WARN_ON(&dev_priv->drm, new_crtc_state->uapi.enable); |
| continue; |
| } |
| |
| ret = intel_atomic_check_joiner(state, crtc); |
| if (ret) |
| goto fail; |
| } |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| if (!intel_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| intel_joiner_adjust_pipe_src(new_crtc_state); |
| |
| intel_crtc_check_fastset(old_crtc_state, new_crtc_state); |
| } |
| |
| /** |
| * Check if fastset is allowed by external dependencies like other |
| * pipes and transcoders. |
| * |
| * Right now it only forces a fullmodeset when the MST master |
| * transcoder did not changed but the pipe of the master transcoder |
| * needs a fullmodeset so all slaves also needs to do a fullmodeset or |
| * in case of port synced crtcs, if one of the synced crtcs |
| * needs a full modeset, all other synced crtcs should be |
| * forced a full modeset. |
| */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (!new_crtc_state->hw.enable || intel_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| if (intel_dp_mst_crtc_needs_modeset(state, crtc)) |
| intel_crtc_flag_modeset(new_crtc_state); |
| |
| if (intel_dp_mst_is_slave_trans(new_crtc_state)) { |
| enum transcoder master = new_crtc_state->mst_master_transcoder; |
| |
| if (intel_cpu_transcoders_need_modeset(state, BIT(master))) |
| intel_crtc_flag_modeset(new_crtc_state); |
| } |
| |
| if (is_trans_port_sync_mode(new_crtc_state)) { |
| u8 trans = new_crtc_state->sync_mode_slaves_mask; |
| |
| if (new_crtc_state->master_transcoder != INVALID_TRANSCODER) |
| trans |= BIT(new_crtc_state->master_transcoder); |
| |
| if (intel_cpu_transcoders_need_modeset(state, trans)) |
| intel_crtc_flag_modeset(new_crtc_state); |
| } |
| |
| if (new_crtc_state->joiner_pipes) { |
| if (intel_pipes_need_modeset(state, new_crtc_state->joiner_pipes)) |
| intel_crtc_flag_modeset(new_crtc_state); |
| } |
| } |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| if (!intel_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| any_ms = true; |
| |
| intel_release_shared_dplls(state, crtc); |
| } |
| |
| if (any_ms && !check_digital_port_conflicts(state)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "rejecting conflicting digital port configuration\n"); |
| ret = -EINVAL; |
| goto fail; |
| } |
| |
| ret = intel_atomic_check_planes(state); |
| if (ret) |
| goto fail; |
| |
| ret = intel_compute_global_watermarks(state); |
| if (ret) |
| goto fail; |
| |
| ret = intel_bw_atomic_check(state); |
| if (ret) |
| goto fail; |
| |
| ret = intel_cdclk_atomic_check(state, &any_ms); |
| if (ret) |
| goto fail; |
| |
| if (intel_any_crtc_needs_modeset(state)) |
| any_ms = true; |
| |
| if (any_ms) { |
| ret = intel_modeset_checks(state); |
| if (ret) |
| goto fail; |
| |
| ret = intel_modeset_calc_cdclk(state); |
| if (ret) |
| return ret; |
| } |
| |
| ret = intel_pmdemand_atomic_check(state); |
| if (ret) |
| goto fail; |
| |
| ret = intel_atomic_check_crtcs(state); |
| if (ret) |
| goto fail; |
| |
| ret = intel_fbc_atomic_check(state); |
| if (ret) |
| goto fail; |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| intel_color_assert_luts(new_crtc_state); |
| |
| ret = intel_async_flip_check_hw(state, crtc); |
| if (ret) |
| goto fail; |
| |
| /* Either full modeset or fastset (or neither), never both */ |
| drm_WARN_ON(&dev_priv->drm, |
| intel_crtc_needs_modeset(new_crtc_state) && |
| intel_crtc_needs_fastset(new_crtc_state)); |
| |
| if (!intel_crtc_needs_modeset(new_crtc_state) && |
| !intel_crtc_needs_fastset(new_crtc_state)) |
| continue; |
| |
| intel_crtc_state_dump(new_crtc_state, state, |
| intel_crtc_needs_modeset(new_crtc_state) ? |
| "modeset" : "fastset"); |
| } |
| |
| return 0; |
| |
| fail: |
| if (ret == -EDEADLK) |
| return ret; |
| |
| /* |
| * FIXME would probably be nice to know which crtc specifically |
| * caused the failure, in cases where we can pinpoint it. |
| */ |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) |
| intel_crtc_state_dump(new_crtc_state, state, "failed"); |
| |
| return ret; |
| } |
| |
| static int intel_atomic_prepare_commit(struct intel_atomic_state *state) |
| { |
| struct intel_crtc_state __maybe_unused *crtc_state; |
| struct intel_crtc *crtc; |
| int i, ret; |
| |
| ret = drm_atomic_helper_prepare_planes(state->base.dev, &state->base); |
| if (ret < 0) |
| return ret; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) |
| intel_color_prepare_commit(state, crtc); |
| |
| return 0; |
| } |
| |
| void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (DISPLAY_VER(dev_priv) != 2 || crtc_state->active_planes) |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true); |
| |
| if (crtc_state->has_pch_encoder) { |
| enum pipe pch_transcoder = |
| intel_crtc_pch_transcoder(crtc); |
| |
| intel_set_pch_fifo_underrun_reporting(dev_priv, pch_transcoder, true); |
| } |
| } |
| |
| static void intel_pipe_fastset(const struct intel_crtc_state *old_crtc_state, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| /* |
| * Update pipe size and adjust fitter if needed: the reason for this is |
| * that in compute_mode_changes we check the native mode (not the pfit |
| * mode) to see if we can flip rather than do a full mode set. In the |
| * fastboot case, we'll flip, but if we don't update the pipesrc and |
| * pfit state, we'll end up with a big fb scanned out into the wrong |
| * sized surface. |
| */ |
| intel_set_pipe_src_size(new_crtc_state); |
| |
| /* on skylake this is done by detaching scalers */ |
| if (DISPLAY_VER(dev_priv) >= 9) { |
| if (new_crtc_state->pch_pfit.enabled) |
| skl_pfit_enable(new_crtc_state); |
| } else if (HAS_PCH_SPLIT(dev_priv)) { |
| if (new_crtc_state->pch_pfit.enabled) |
| ilk_pfit_enable(new_crtc_state); |
| else if (old_crtc_state->pch_pfit.enabled) |
| ilk_pfit_disable(old_crtc_state); |
| } |
| |
| /* |
| * The register is supposedly single buffered so perhaps |
| * not 100% correct to do this here. But SKL+ calculate |
| * this based on the adjust pixel rate so pfit changes do |
| * affect it and so it must be updated for fastsets. |
| * HSW/BDW only really need this here for fastboot, after |
| * that the value should not change without a full modeset. |
| */ |
| if (DISPLAY_VER(dev_priv) >= 9 || |
| IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) |
| hsw_set_linetime_wm(new_crtc_state); |
| |
| if (new_crtc_state->update_m_n) |
| intel_cpu_transcoder_set_m1_n1(crtc, new_crtc_state->cpu_transcoder, |
| &new_crtc_state->dp_m_n); |
| |
| if (new_crtc_state->update_lrr) |
| intel_set_transcoder_timings_lrr(new_crtc_state); |
| } |
| |
| static void commit_pipe_pre_planes(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| bool modeset = intel_crtc_needs_modeset(new_crtc_state); |
| |
| /* |
| * During modesets pipe configuration was programmed as the |
| * CRTC was enabled. |
| */ |
| if (!modeset) { |
| if (intel_crtc_needs_color_update(new_crtc_state)) |
| intel_color_commit_arm(new_crtc_state); |
| |
| if (DISPLAY_VER(dev_priv) >= 9 || IS_BROADWELL(dev_priv)) |
| bdw_set_pipe_misc(new_crtc_state); |
| |
| if (intel_crtc_needs_fastset(new_crtc_state)) |
| intel_pipe_fastset(old_crtc_state, new_crtc_state); |
| } |
| |
| intel_psr2_program_trans_man_trk_ctl(new_crtc_state); |
| |
| intel_atomic_update_watermarks(state, crtc); |
| } |
| |
| static void commit_pipe_post_planes(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| |
| /* |
| * Disable the scaler(s) after the plane(s) so that we don't |
| * get a catastrophic underrun even if the two operations |
| * end up happening in two different frames. |
| */ |
| if (DISPLAY_VER(dev_priv) >= 9 && |
| !intel_crtc_needs_modeset(new_crtc_state)) |
| skl_detach_scalers(new_crtc_state); |
| |
| if (vrr_enabling(old_crtc_state, new_crtc_state)) |
| intel_vrr_enable(new_crtc_state); |
| } |
| |
| static void intel_enable_crtc(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct intel_crtc *pipe_crtc; |
| |
| if (!intel_crtc_needs_modeset(new_crtc_state)) |
| return; |
| |
| for_each_intel_crtc_in_pipe_mask_reverse(&dev_priv->drm, pipe_crtc, |
| intel_crtc_joined_pipe_mask(new_crtc_state)) { |
| const struct intel_crtc_state *pipe_crtc_state = |
| intel_atomic_get_new_crtc_state(state, pipe_crtc); |
| |
| /* VRR will be enable later, if required */ |
| intel_crtc_update_active_timings(pipe_crtc_state, false); |
| } |
| |
| dev_priv->display.funcs.display->crtc_enable(state, crtc); |
| |
| /* vblanks work again, re-enable pipe CRC. */ |
| intel_crtc_enable_pipe_crc(crtc); |
| } |
| |
| static void intel_pre_update_crtc(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| bool modeset = intel_crtc_needs_modeset(new_crtc_state); |
| |
| if (old_crtc_state->inherited || |
| intel_crtc_needs_modeset(new_crtc_state)) { |
| if (HAS_DPT(i915)) |
| intel_dpt_configure(crtc); |
| } |
| |
| if (!modeset) { |
| if (new_crtc_state->preload_luts && |
| intel_crtc_needs_color_update(new_crtc_state)) |
| intel_color_load_luts(new_crtc_state); |
| |
| intel_pre_plane_update(state, crtc); |
| |
| if (intel_crtc_needs_fastset(new_crtc_state)) |
| intel_encoders_update_pipe(state, crtc); |
| |
| if (DISPLAY_VER(i915) >= 11 && |
| intel_crtc_needs_fastset(new_crtc_state)) |
| icl_set_pipe_chicken(new_crtc_state); |
| |
| if (vrr_params_changed(old_crtc_state, new_crtc_state) || |
| cmrr_params_changed(old_crtc_state, new_crtc_state)) |
| intel_vrr_set_transcoder_timings(new_crtc_state); |
| } |
| |
| intel_fbc_update(state, crtc); |
| |
| drm_WARN_ON(&i915->drm, !intel_display_power_is_enabled(i915, POWER_DOMAIN_DC_OFF)); |
| |
| if (!modeset && |
| intel_crtc_needs_color_update(new_crtc_state)) |
| intel_color_commit_noarm(new_crtc_state); |
| |
| intel_crtc_planes_update_noarm(state, crtc); |
| } |
| |
| static void intel_update_crtc(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| |
| /* Perform vblank evasion around commit operation */ |
| intel_pipe_update_start(state, crtc); |
| |
| commit_pipe_pre_planes(state, crtc); |
| |
| intel_crtc_planes_update_arm(state, crtc); |
| |
| commit_pipe_post_planes(state, crtc); |
| |
| intel_pipe_update_end(state, crtc); |
| |
| /* |
| * VRR/Seamless M/N update may need to update frame timings. |
| * |
| * FIXME Should be synchronized with the start of vblank somehow... |
| */ |
| if (vrr_enabling(old_crtc_state, new_crtc_state) || |
| new_crtc_state->update_m_n || new_crtc_state->update_lrr) |
| intel_crtc_update_active_timings(new_crtc_state, |
| new_crtc_state->vrr.enable); |
| |
| /* |
| * We usually enable FIFO underrun interrupts as part of the |
| * CRTC enable sequence during modesets. But when we inherit a |
| * valid pipe configuration from the BIOS we need to take care |
| * of enabling them on the CRTC's first fastset. |
| */ |
| if (intel_crtc_needs_fastset(new_crtc_state) && |
| old_crtc_state->inherited) |
| intel_crtc_arm_fifo_underrun(crtc, new_crtc_state); |
| } |
| |
| static void intel_old_crtc_state_disables(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| struct intel_crtc *pipe_crtc; |
| |
| /* |
| * We need to disable pipe CRC before disabling the pipe, |
| * or we race against vblank off. |
| */ |
| for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, pipe_crtc, |
| intel_crtc_joined_pipe_mask(old_crtc_state)) |
| intel_crtc_disable_pipe_crc(pipe_crtc); |
| |
| dev_priv->display.funcs.display->crtc_disable(state, crtc); |
| |
| for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, pipe_crtc, |
| intel_crtc_joined_pipe_mask(old_crtc_state)) { |
| const struct intel_crtc_state *new_pipe_crtc_state = |
| intel_atomic_get_new_crtc_state(state, pipe_crtc); |
| |
| pipe_crtc->active = false; |
| intel_fbc_disable(pipe_crtc); |
| |
| if (!new_pipe_crtc_state->hw.active) |
| intel_initial_watermarks(state, pipe_crtc); |
| } |
| } |
| |
| static void intel_commit_modeset_disables(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_crtc_state *new_crtc_state, *old_crtc_state; |
| struct intel_crtc *crtc; |
| u8 disable_pipes = 0; |
| int i; |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| if (!intel_crtc_needs_modeset(new_crtc_state)) |
| continue; |
| |
| /* |
| * Needs to be done even for pipes |
| * that weren't enabled previously. |
| */ |
| intel_pre_plane_update(state, crtc); |
| |
| if (!old_crtc_state->hw.active) |
| continue; |
| |
| disable_pipes |= BIT(crtc->pipe); |
| } |
| |
| for_each_old_intel_crtc_in_state(state, crtc, old_crtc_state, i) { |
| if ((disable_pipes & BIT(crtc->pipe)) == 0) |
| continue; |
| |
| intel_crtc_disable_planes(state, crtc); |
| |
| drm_vblank_work_flush_all(&crtc->base); |
| } |
| |
| /* Only disable port sync and MST slaves */ |
| for_each_old_intel_crtc_in_state(state, crtc, old_crtc_state, i) { |
| if ((disable_pipes & BIT(crtc->pipe)) == 0) |
| continue; |
| |
| if (intel_crtc_is_joiner_secondary(old_crtc_state)) |
| continue; |
| |
| /* In case of Transcoder port Sync master slave CRTCs can be |
| * assigned in any order and we need to make sure that |
| * slave CRTCs are disabled first and then master CRTC since |
| * Slave vblanks are masked till Master Vblanks. |
| */ |
| if (!is_trans_port_sync_slave(old_crtc_state) && |
| !intel_dp_mst_is_slave_trans(old_crtc_state)) |
| continue; |
| |
| intel_old_crtc_state_disables(state, crtc); |
| |
| disable_pipes &= ~intel_crtc_joined_pipe_mask(old_crtc_state); |
| } |
| |
| /* Disable everything else left on */ |
| for_each_old_intel_crtc_in_state(state, crtc, old_crtc_state, i) { |
| if ((disable_pipes & BIT(crtc->pipe)) == 0) |
| continue; |
| |
| if (intel_crtc_is_joiner_secondary(old_crtc_state)) |
| continue; |
| |
| intel_old_crtc_state_disables(state, crtc); |
| |
| disable_pipes &= ~intel_crtc_joined_pipe_mask(old_crtc_state); |
| } |
| |
| drm_WARN_ON(&i915->drm, disable_pipes); |
| } |
| |
| static void intel_commit_modeset_enables(struct intel_atomic_state *state) |
| { |
| struct intel_crtc_state *new_crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (!new_crtc_state->hw.active) |
| continue; |
| |
| intel_enable_crtc(state, crtc); |
| intel_pre_update_crtc(state, crtc); |
| } |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (!new_crtc_state->hw.active) |
| continue; |
| |
| intel_update_crtc(state, crtc); |
| } |
| } |
| |
| static void skl_commit_modeset_enables(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_crtc *crtc; |
| struct intel_crtc_state *old_crtc_state, *new_crtc_state; |
| struct skl_ddb_entry entries[I915_MAX_PIPES] = {}; |
| u8 update_pipes = 0, modeset_pipes = 0; |
| int i; |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| enum pipe pipe = crtc->pipe; |
| |
| if (!new_crtc_state->hw.active) |
| continue; |
| |
| /* ignore allocations for crtc's that have been turned off. */ |
| if (!intel_crtc_needs_modeset(new_crtc_state)) { |
| entries[pipe] = old_crtc_state->wm.skl.ddb; |
| update_pipes |= BIT(pipe); |
| } else { |
| modeset_pipes |= BIT(pipe); |
| } |
| } |
| |
| /* |
| * Whenever the number of active pipes changes, we need to make sure we |
| * update the pipes in the right order so that their ddb allocations |
| * never overlap with each other between CRTC updates. Otherwise we'll |
| * cause pipe underruns and other bad stuff. |
| * |
| * So first lets enable all pipes that do not need a fullmodeset as |
| * those don't have any external dependency. |
| */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| enum pipe pipe = crtc->pipe; |
| |
| if ((update_pipes & BIT(pipe)) == 0) |
| continue; |
| |
| intel_pre_update_crtc(state, crtc); |
| } |
| |
| intel_dbuf_mbus_pre_ddb_update(state); |
| |
| while (update_pipes) { |
| /* |
| * Commit in reverse order to make joiner primary |
| * send the uapi events after secondaries are done. |
| */ |
| for_each_oldnew_intel_crtc_in_state_reverse(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| enum pipe pipe = crtc->pipe; |
| |
| if ((update_pipes & BIT(pipe)) == 0) |
| continue; |
| |
| if (skl_ddb_allocation_overlaps(&new_crtc_state->wm.skl.ddb, |
| entries, I915_MAX_PIPES, pipe)) |
| continue; |
| |
| entries[pipe] = new_crtc_state->wm.skl.ddb; |
| update_pipes &= ~BIT(pipe); |
| |
| intel_update_crtc(state, crtc); |
| |
| /* |
| * If this is an already active pipe, it's DDB changed, |
| * and this isn't the last pipe that needs updating |
| * then we need to wait for a vblank to pass for the |
| * new ddb allocation to take effect. |
| */ |
| if (!skl_ddb_entry_equal(&new_crtc_state->wm.skl.ddb, |
| &old_crtc_state->wm.skl.ddb) && |
| (update_pipes | modeset_pipes)) |
| intel_crtc_wait_for_next_vblank(crtc); |
| } |
| } |
| |
| intel_dbuf_mbus_post_ddb_update(state); |
| |
| update_pipes = modeset_pipes; |
| |
| /* |
| * Enable all pipes that needs a modeset and do not depends on other |
| * pipes |
| */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| enum pipe pipe = crtc->pipe; |
| |
| if ((modeset_pipes & BIT(pipe)) == 0) |
| continue; |
| |
| if (intel_crtc_is_joiner_secondary(new_crtc_state)) |
| continue; |
| |
| if (intel_dp_mst_is_slave_trans(new_crtc_state) || |
| is_trans_port_sync_master(new_crtc_state)) |
| continue; |
| |
| modeset_pipes &= ~intel_crtc_joined_pipe_mask(new_crtc_state); |
| |
| intel_enable_crtc(state, crtc); |
| } |
| |
| /* |
| * Then we enable all remaining pipes that depend on other |
| * pipes: MST slaves and port sync masters |
| */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| enum pipe pipe = crtc->pipe; |
| |
| if ((modeset_pipes & BIT(pipe)) == 0) |
| continue; |
| |
| if (intel_crtc_is_joiner_secondary(new_crtc_state)) |
| continue; |
| |
| modeset_pipes &= ~intel_crtc_joined_pipe_mask(new_crtc_state); |
| |
| intel_enable_crtc(state, crtc); |
| } |
| |
| /* |
| * Finally we do the plane updates/etc. for all pipes that got enabled. |
| */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| enum pipe pipe = crtc->pipe; |
| |
| if ((update_pipes & BIT(pipe)) == 0) |
| continue; |
| |
| intel_pre_update_crtc(state, crtc); |
| } |
| |
| /* |
| * Commit in reverse order to make joiner primary |
| * send the uapi events after secondaries are done. |
| */ |
| for_each_new_intel_crtc_in_state_reverse(state, crtc, new_crtc_state, i) { |
| enum pipe pipe = crtc->pipe; |
| |
| if ((update_pipes & BIT(pipe)) == 0) |
| continue; |
| |
| drm_WARN_ON(&dev_priv->drm, skl_ddb_allocation_overlaps(&new_crtc_state->wm.skl.ddb, |
| entries, I915_MAX_PIPES, pipe)); |
| |
| entries[pipe] = new_crtc_state->wm.skl.ddb; |
| update_pipes &= ~BIT(pipe); |
| |
| intel_update_crtc(state, crtc); |
| } |
| |
| drm_WARN_ON(&dev_priv->drm, modeset_pipes); |
| drm_WARN_ON(&dev_priv->drm, update_pipes); |
| } |
| |
| static void intel_atomic_commit_fence_wait(struct intel_atomic_state *intel_state) |
| { |
| struct drm_i915_private *i915 = to_i915(intel_state->base.dev); |
| struct drm_plane *plane; |
| struct drm_plane_state *new_plane_state; |
| int ret, i; |
| |
| for_each_new_plane_in_state(&intel_state->base, plane, new_plane_state, i) { |
| if (new_plane_state->fence) { |
| ret = dma_fence_wait_timeout(new_plane_state->fence, false, |
| i915_fence_timeout(i915)); |
| if (ret <= 0) |
| break; |
| |
| dma_fence_put(new_plane_state->fence); |
| new_plane_state->fence = NULL; |
| } |
| } |
| } |
| |
| static void intel_atomic_cleanup_work(struct work_struct *work) |
| { |
| struct intel_atomic_state *state = |
| container_of(work, struct intel_atomic_state, base.commit_work); |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct intel_crtc_state *old_crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_old_intel_crtc_in_state(state, crtc, old_crtc_state, i) |
| intel_color_cleanup_commit(old_crtc_state); |
| |
| drm_atomic_helper_cleanup_planes(&i915->drm, &state->base); |
| drm_atomic_helper_commit_cleanup_done(&state->base); |
| drm_atomic_state_put(&state->base); |
| } |
| |
| static void intel_atomic_prepare_plane_clear_colors(struct intel_atomic_state *state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct intel_plane *plane; |
| struct intel_plane_state *plane_state; |
| int i; |
| |
| for_each_new_intel_plane_in_state(state, plane, plane_state, i) { |
| struct drm_framebuffer *fb = plane_state->hw.fb; |
| int cc_plane; |
| int ret; |
| |
| if (!fb) |
| continue; |
| |
| cc_plane = intel_fb_rc_ccs_cc_plane(fb); |
| if (cc_plane < 0) |
| continue; |
| |
| /* |
| * The layout of the fast clear color value expected by HW |
| * (the DRM ABI requiring this value to be located in fb at |
| * offset 0 of cc plane, plane #2 previous generations or |
| * plane #1 for flat ccs): |
| * - 4 x 4 bytes per-channel value |
| * (in surface type specific float/int format provided by the fb user) |
| * - 8 bytes native color value used by the display |
| * (converted/written by GPU during a fast clear operation using the |
| * above per-channel values) |
| * |
| * The commit's FB prepare hook already ensured that FB obj is pinned and the |
| * caller made sure that the object is synced wrt. the related color clear value |
| * GPU write on it. |
| */ |
| ret = i915_gem_object_read_from_page(intel_fb_obj(fb), |
| fb->offsets[cc_plane] + 16, |
| &plane_state->ccval, |
| sizeof(plane_state->ccval)); |
| /* The above could only fail if the FB obj has an unexpected backing store type. */ |
| drm_WARN_ON(&i915->drm, ret); |
| } |
| } |
| |
| static void intel_atomic_commit_tail(struct intel_atomic_state *state) |
| { |
| struct drm_device *dev = state->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_crtc_state *new_crtc_state, *old_crtc_state; |
| struct intel_crtc *crtc; |
| struct intel_power_domain_mask put_domains[I915_MAX_PIPES] = {}; |
| intel_wakeref_t wakeref = 0; |
| int i; |
| |
| intel_atomic_commit_fence_wait(state); |
| |
| intel_td_flush(dev_priv); |
| |
| drm_atomic_helper_wait_for_dependencies(&state->base); |
| drm_dp_mst_atomic_wait_for_dependencies(&state->base); |
| intel_atomic_global_state_wait_for_dependencies(state); |
| |
| /* |
| * During full modesets we write a lot of registers, wait |
| * for PLLs, etc. Doing that while DC states are enabled |
| * is not a good idea. |
| * |
| * During fastsets and other updates we also need to |
| * disable DC states due to the following scenario: |
| * 1. DC5 exit and PSR exit happen |
| * 2. Some or all _noarm() registers are written |
| * 3. Due to some long delay PSR is re-entered |
| * 4. DC5 entry -> DMC saves the already written new |
| * _noarm() registers and the old not yet written |
| * _arm() registers |
| * 5. DC5 exit -> DMC restores a mixture of old and |
| * new register values and arms the update |
| * 6. PSR exit -> hardware latches a mixture of old and |
| * new register values -> corrupted frame, or worse |
| * 7. New _arm() registers are finally written |
| * 8. Hardware finally latches a complete set of new |
| * register values, and subsequent frames will be OK again |
| * |
| * Also note that due to the pipe CSC hardware issues on |
| * SKL/GLK DC states must remain off until the pipe CSC |
| * state readout has happened. Otherwise we risk corrupting |
| * the CSC latched register values with the readout (see |
| * skl_read_csc() and skl_color_commit_noarm()). |
| */ |
| wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DC_OFF); |
| |
| intel_atomic_prepare_plane_clear_colors(state); |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| if (intel_crtc_needs_modeset(new_crtc_state) || |
| intel_crtc_needs_fastset(new_crtc_state)) |
| intel_modeset_get_crtc_power_domains(new_crtc_state, &put_domains[crtc->pipe]); |
| } |
| |
| intel_commit_modeset_disables(state); |
| |
| intel_dp_tunnel_atomic_alloc_bw(state); |
| |
| /* FIXME: Eventually get rid of our crtc->config pointer */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) |
| crtc->config = new_crtc_state; |
| |
| /* |
| * In XE_LPD+ Pmdemand combines many parameters such as voltage index, |
| * plls, cdclk frequency, QGV point selection parameter etc. Voltage |
| * index, cdclk/ddiclk frequencies are supposed to be configured before |
| * the cdclk config is set. |
| */ |
| intel_pmdemand_pre_plane_update(state); |
| |
| if (state->modeset) { |
| drm_atomic_helper_update_legacy_modeset_state(dev, &state->base); |
| |
| intel_set_cdclk_pre_plane_update(state); |
| |
| intel_modeset_verify_disabled(state); |
| } |
| |
| intel_sagv_pre_plane_update(state); |
| |
| /* Complete the events for pipes that have now been disabled */ |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| bool modeset = intel_crtc_needs_modeset(new_crtc_state); |
| |
| /* Complete events for now disable pipes here. */ |
| if (modeset && !new_crtc_state->hw.active && new_crtc_state->uapi.event) { |
| spin_lock_irq(&dev->event_lock); |
| drm_crtc_send_vblank_event(&crtc->base, |
| new_crtc_state->uapi.event); |
| spin_unlock_irq(&dev->event_lock); |
| |
| new_crtc_state->uapi.event = NULL; |
| } |
| } |
| |
| intel_encoders_update_prepare(state); |
| |
| intel_dbuf_pre_plane_update(state); |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (new_crtc_state->do_async_flip) |
| intel_crtc_enable_flip_done(state, crtc); |
| } |
| |
| /* Now enable the clocks, plane, pipe, and connectors that we set up. */ |
| dev_priv->display.funcs.display->commit_modeset_enables(state); |
| |
| if (state->modeset) |
| intel_set_cdclk_post_plane_update(state); |
| |
| intel_wait_for_vblank_workers(state); |
| |
| /* FIXME: We should call drm_atomic_helper_commit_hw_done() here |
| * already, but still need the state for the delayed optimization. To |
| * fix this: |
| * - wrap the optimization/post_plane_update stuff into a per-crtc work. |
| * - schedule that vblank worker _before_ calling hw_done |
| * - at the start of commit_tail, cancel it _synchrously |
| * - switch over to the vblank wait helper in the core after that since |
| * we don't need out special handling any more. |
| */ |
| drm_atomic_helper_wait_for_flip_done(dev, &state->base); |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) { |
| if (new_crtc_state->do_async_flip) |
| intel_crtc_disable_flip_done(state, crtc); |
| |
| intel_color_wait_commit(new_crtc_state); |
| } |
| |
| /* |
| * Now that the vblank has passed, we can go ahead and program the |
| * optimal watermarks on platforms that need two-step watermark |
| * programming. |
| * |
| * TODO: Move this (and other cleanup) to an async worker eventually. |
| */ |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| /* |
| * Gen2 reports pipe underruns whenever all planes are disabled. |
| * So re-enable underrun reporting after some planes get enabled. |
| * |
| * We do this before .optimize_watermarks() so that we have a |
| * chance of catching underruns with the intermediate watermarks |
| * vs. the new plane configuration. |
| */ |
| if (DISPLAY_VER(dev_priv) == 2 && planes_enabling(old_crtc_state, new_crtc_state)) |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true); |
| |
| intel_optimize_watermarks(state, crtc); |
| } |
| |
| intel_dbuf_post_plane_update(state); |
| |
| for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) { |
| intel_post_plane_update(state, crtc); |
| |
| intel_modeset_put_crtc_power_domains(crtc, &put_domains[crtc->pipe]); |
| |
| intel_modeset_verify_crtc(state, crtc); |
| |
| /* Must be done after gamma readout due to HSW split gamma vs. IPS w/a */ |
| hsw_ips_post_update(state, crtc); |
| |
| /* |
| * Activate DRRS after state readout to avoid |
| * dp_m_n vs. dp_m2_n2 confusion on BDW+. |
| */ |
| intel_drrs_activate(new_crtc_state); |
| |
| /* |
| * DSB cleanup is done in cleanup_work aligning with framebuffer |
| * cleanup. So copy and reset the dsb structure to sync with |
| * commit_done and later do dsb cleanup in cleanup_work. |
| * |
| * FIXME get rid of this funny new->old swapping |
| */ |
| old_crtc_state->dsb = fetch_and_zero(&new_crtc_state->dsb); |
| } |
| |
| /* Underruns don't always raise interrupts, so check manually */ |
| intel_check_cpu_fifo_underruns(dev_priv); |
| intel_check_pch_fifo_underruns(dev_priv); |
| |
| if (state->modeset) |
| intel_verify_planes(state); |
| |
| intel_sagv_post_plane_update(state); |
| intel_pmdemand_post_plane_update(state); |
| |
| drm_atomic_helper_commit_hw_done(&state->base); |
| intel_atomic_global_state_commit_done(state); |
| |
| if (state->modeset) { |
| /* As one of the primary mmio accessors, KMS has a high |
| * likelihood of triggering bugs in unclaimed access. After we |
| * finish modesetting, see if an error has been flagged, and if |
| * so enable debugging for the next modeset - and hope we catch |
| * the culprit. |
| */ |
| intel_uncore_arm_unclaimed_mmio_detection(&dev_priv->uncore); |
| } |
| /* |
| * Delay re-enabling DC states by 17 ms to avoid the off->on->off |
| * toggling overhead at and above 60 FPS. |
| */ |
| intel_display_power_put_async_delay(dev_priv, POWER_DOMAIN_DC_OFF, wakeref, 17); |
| intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref); |
| |
| /* |
| * Defer the cleanup of the old state to a separate worker to not |
| * impede the current task (userspace for blocking modesets) that |
| * are executed inline. For out-of-line asynchronous modesets/flips, |
| * deferring to a new worker seems overkill, but we would place a |
| * schedule point (cond_resched()) here anyway to keep latencies |
| * down. |
| */ |
| INIT_WORK(&state->base.commit_work, intel_atomic_cleanup_work); |
| queue_work(system_highpri_wq, &state->base.commit_work); |
| } |
| |
| static void intel_atomic_commit_work(struct work_struct *work) |
| { |
| struct intel_atomic_state *state = |
| container_of(work, struct intel_atomic_state, base.commit_work); |
| |
| intel_atomic_commit_tail(state); |
| } |
| |
| static void intel_atomic_track_fbs(struct intel_atomic_state *state) |
| { |
| struct intel_plane_state *old_plane_state, *new_plane_state; |
| struct intel_plane *plane; |
| int i; |
| |
| for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state, |
| new_plane_state, i) |
| intel_frontbuffer_track(to_intel_frontbuffer(old_plane_state->hw.fb), |
| to_intel_frontbuffer(new_plane_state->hw.fb), |
| plane->frontbuffer_bit); |
| } |
| |
| static int intel_atomic_setup_commit(struct intel_atomic_state *state, bool nonblock) |
| { |
| int ret; |
| |
| ret = drm_atomic_helper_setup_commit(&state->base, nonblock); |
| if (ret) |
| return ret; |
| |
| ret = intel_atomic_global_state_setup_commit(state); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int intel_atomic_swap_state(struct intel_atomic_state *state) |
| { |
| int ret; |
| |
| ret = drm_atomic_helper_swap_state(&state->base, true); |
| if (ret) |
| return ret; |
| |
| intel_atomic_swap_global_state(state); |
| |
| intel_shared_dpll_swap_state(state); |
| |
| intel_atomic_track_fbs(state); |
| |
| return 0; |
| } |
| |
| int intel_atomic_commit(struct drm_device *dev, struct drm_atomic_state *_state, |
| bool nonblock) |
| { |
| struct intel_atomic_state *state = to_intel_atomic_state(_state); |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| int ret = 0; |
| |
| state->wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm); |
| |
| /* |
| * The intel_legacy_cursor_update() fast path takes care |
| * of avoiding the vblank waits for simple cursor |
| * movement and flips. For cursor on/off and size changes, |
| * we want to perform the vblank waits so that watermark |
| * updates happen during the correct frames. Gen9+ have |
| * double buffered watermarks and so shouldn't need this. |
| * |
| * Unset state->legacy_cursor_update before the call to |
| * drm_atomic_helper_setup_commit() because otherwise |
| * drm_atomic_helper_wait_for_flip_done() is a noop and |
| * we get FIFO underruns because we didn't wait |
| * for vblank. |
| * |
| * FIXME doing watermarks and fb cleanup from a vblank worker |
| * (assuming we had any) would solve these problems. |
| */ |
| if (DISPLAY_VER(dev_priv) < 9 && state->base.legacy_cursor_update) { |
| struct intel_crtc_state *new_crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) |
| if (new_crtc_state->wm.need_postvbl_update || |
| new_crtc_state->update_wm_post) |
| state->base.legacy_cursor_update = false; |
| } |
| |
| ret = intel_atomic_prepare_commit(state); |
| if (ret) { |
| drm_dbg_atomic(&dev_priv->drm, |
| "Preparing state failed with %i\n", ret); |
| intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref); |
| return ret; |
| } |
| |
| ret = intel_atomic_setup_commit(state, nonblock); |
| if (!ret) |
| ret = intel_atomic_swap_state(state); |
| |
| if (ret) { |
| struct intel_crtc_state *new_crtc_state; |
| struct intel_crtc *crtc; |
| int i; |
| |
| for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) |
| intel_color_cleanup_commit(new_crtc_state); |
| |
| drm_atomic_helper_unprepare_planes(dev, &state->base); |
| intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref); |
| return ret; |
| } |
| |
| drm_atomic_state_get(&state->base); |
| INIT_WORK(&state->base.commit_work, intel_atomic_commit_work); |
| |
| if (nonblock && state->modeset) { |
| queue_work(dev_priv->display.wq.modeset, &state->base.commit_work); |
| } else if (nonblock) { |
| queue_work(dev_priv->display.wq.flip, &state->base.commit_work); |
| } else { |
| if (state->modeset) |
| flush_workqueue(dev_priv->display.wq.modeset); |
| intel_atomic_commit_tail(state); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * intel_plane_destroy - destroy a plane |
| * @plane: plane to destroy |
| * |
| * Common destruction function for all types of planes (primary, cursor, |
| * sprite). |
| */ |
| void intel_plane_destroy(struct drm_plane *plane) |
| { |
| drm_plane_cleanup(plane); |
| kfree(to_intel_plane(plane)); |
| } |
| |
| int intel_get_pipe_from_crtc_id_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data; |
| struct drm_crtc *drmmode_crtc; |
| struct intel_crtc *crtc; |
| |
| drmmode_crtc = drm_crtc_find(dev, file, pipe_from_crtc_id->crtc_id); |
| if (!drmmode_crtc) |
| return -ENOENT; |
| |
| crtc = to_intel_crtc(drmmode_crtc); |
| pipe_from_crtc_id->pipe = crtc->pipe; |
| |
| return 0; |
| } |
| |
| static u32 intel_encoder_possible_clones(struct intel_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct intel_encoder *source_encoder; |
| u32 possible_clones = 0; |
| |
| for_each_intel_encoder(dev, source_encoder) { |
| if (encoders_cloneable(encoder, source_encoder)) |
| possible_clones |= drm_encoder_mask(&source_encoder->base); |
| } |
| |
| return possible_clones; |
| } |
| |
| static u32 intel_encoder_possible_crtcs(struct intel_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct intel_crtc *crtc; |
| u32 possible_crtcs = 0; |
| |
| for_each_intel_crtc_in_pipe_mask(dev, crtc, encoder->pipe_mask) |
| possible_crtcs |= drm_crtc_mask(&crtc->base); |
| |
| return possible_crtcs; |
| } |
| |
| static bool ilk_has_edp_a(struct drm_i915_private *dev_priv) |
| { |
| if (!IS_MOBILE(dev_priv)) |
| return false; |
| |
| if ((intel_de_read(dev_priv, DP_A) & DP_DETECTED) == 0) |
| return false; |
| |
| if (IS_IRONLAKE(dev_priv) && (intel_de_read(dev_priv, FUSE_STRAP) & ILK_eDP_A_DISABLE)) |
| return false; |
| |
| return true; |
| } |
| |
| static bool intel_ddi_crt_present(struct drm_i915_private *dev_priv) |
| { |
| if (DISPLAY_VER(dev_priv) >= 9) |
| return false; |
| |
| if (IS_HASWELL_ULT(dev_priv) || IS_BROADWELL_ULT(dev_priv)) |
| return false; |
| |
| if (HAS_PCH_LPT_H(dev_priv) && |
| intel_de_read(dev_priv, SFUSE_STRAP) & SFUSE_STRAP_CRT_DISABLED) |
| return false; |
| |
| /* DDI E can't be used if DDI A requires 4 lanes */ |
| if (intel_de_read(dev_priv, DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES) |
| return false; |
| |
| if (!dev_priv->display.vbt.int_crt_support) |
| return false; |
| |
| return true; |
| } |
| |
| bool assert_port_valid(struct drm_i915_private *i915, enum port port) |
| { |
| return !drm_WARN(&i915->drm, !(DISPLAY_RUNTIME_INFO(i915)->port_mask & BIT(port)), |
| "Platform does not support port %c\n", port_name(port)); |
| } |
| |
| void intel_setup_outputs(struct drm_i915_private *dev_priv) |
| { |
| struct intel_encoder *encoder; |
| bool dpd_is_edp = false; |
| |
| intel_pps_unlock_regs_wa(dev_priv); |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| if (HAS_DDI(dev_priv)) { |
| if (intel_ddi_crt_present(dev_priv)) |
| intel_crt_init(dev_priv); |
| |
| intel_bios_for_each_encoder(dev_priv, intel_ddi_init); |
| |
| if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) |
| vlv_dsi_init(dev_priv); |
| } else if (HAS_PCH_SPLIT(dev_priv)) { |
| int found; |
| |
| /* |
| * intel_edp_init_connector() depends on this completing first, |
| * to prevent the registration of both eDP and LVDS and the |
| * incorrect sharing of the PPS. |
| */ |
| intel_lvds_init(dev_priv); |
| intel_crt_init(dev_priv); |
| |
| dpd_is_edp = intel_dp_is_port_edp(dev_priv, PORT_D); |
| |
| if (ilk_has_edp_a(dev_priv)) |
| g4x_dp_init(dev_priv, DP_A, PORT_A); |
| |
| if (intel_de_read(dev_priv, PCH_HDMIB) & SDVO_DETECTED) { |
| /* PCH SDVOB multiplex with HDMIB */ |
| found = intel_sdvo_init(dev_priv, PCH_SDVOB, PORT_B); |
| if (!found) |
| g4x_hdmi_init(dev_priv, PCH_HDMIB, PORT_B); |
| if (!found && (intel_de_read(dev_priv, PCH_DP_B) & DP_DETECTED)) |
| g4x_dp_init(dev_priv, PCH_DP_B, PORT_B); |
| } |
| |
| if (intel_de_read(dev_priv, PCH_HDMIC) & SDVO_DETECTED) |
| g4x_hdmi_init(dev_priv, PCH_HDMIC, PORT_C); |
| |
| if (!dpd_is_edp && intel_de_read(dev_priv, PCH_HDMID) & SDVO_DETECTED) |
| g4x_hdmi_init(dev_priv, PCH_HDMID, PORT_D); |
| |
| if (intel_de_read(dev_priv, PCH_DP_C) & DP_DETECTED) |
| g4x_dp_init(dev_priv, PCH_DP_C, PORT_C); |
| |
| if (intel_de_read(dev_priv, PCH_DP_D) & DP_DETECTED) |
| g4x_dp_init(dev_priv, PCH_DP_D, PORT_D); |
| } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { |
| bool has_edp, has_port; |
| |
| if (IS_VALLEYVIEW(dev_priv) && dev_priv->display.vbt.int_crt_support) |
| intel_crt_init(dev_priv); |
| |
| /* |
| * The DP_DETECTED bit is the latched state of the DDC |
| * SDA pin at boot. However since eDP doesn't require DDC |
| * (no way to plug in a DP->HDMI dongle) the DDC pins for |
| * eDP ports may have been muxed to an alternate function. |
| * Thus we can't rely on the DP_DETECTED bit alone to detect |
| * eDP ports. Consult the VBT as well as DP_DETECTED to |
| * detect eDP ports. |
| * |
| * Sadly the straps seem to be missing sometimes even for HDMI |
| * ports (eg. on Voyo V3 - CHT x7-Z8700), so check both strap |
| * and VBT for the presence of the port. Additionally we can't |
| * trust the port type the VBT declares as we've seen at least |
| * HDMI ports that the VBT claim are DP or eDP. |
| */ |
| has_edp = intel_dp_is_port_edp(dev_priv, PORT_B); |
| has_port = intel_bios_is_port_present(dev_priv, PORT_B); |
| if (intel_de_read(dev_priv, VLV_DP_B) & DP_DETECTED || has_port) |
| has_edp &= g4x_dp_init(dev_priv, VLV_DP_B, PORT_B); |
| if ((intel_de_read(dev_priv, VLV_HDMIB) & SDVO_DETECTED || has_port) && !has_edp) |
| g4x_hdmi_init(dev_priv, VLV_HDMIB, PORT_B); |
| |
| has_edp = intel_dp_is_port_edp(dev_priv, PORT_C); |
| has_port = intel_bios_is_port_present(dev_priv, PORT_C); |
| if (intel_de_read(dev_priv, VLV_DP_C) & DP_DETECTED || has_port) |
| has_edp &= g4x_dp_init(dev_priv, VLV_DP_C, PORT_C); |
| if ((intel_de_read(dev_priv, VLV_HDMIC) & SDVO_DETECTED || has_port) && !has_edp) |
| g4x_hdmi_init(dev_priv, VLV_HDMIC, PORT_C); |
| |
| if (IS_CHERRYVIEW(dev_priv)) { |
| /* |
| * eDP not supported on port D, |
| * so no need to worry about it |
| */ |
| has_port = intel_bios_is_port_present(dev_priv, PORT_D); |
| if (intel_de_read(dev_priv, CHV_DP_D) & DP_DETECTED || has_port) |
| g4x_dp_init(dev_priv, CHV_DP_D, PORT_D); |
| if (intel_de_read(dev_priv, CHV_HDMID) & SDVO_DETECTED || has_port) |
| g4x_hdmi_init(dev_priv, CHV_HDMID, PORT_D); |
| } |
| |
| vlv_dsi_init(dev_priv); |
| } else if (IS_PINEVIEW(dev_priv)) { |
| intel_lvds_init(dev_priv); |
| intel_crt_init(dev_priv); |
| } else if (IS_DISPLAY_VER(dev_priv, 3, 4)) { |
| bool found = false; |
| |
| if (IS_MOBILE(dev_priv)) |
| intel_lvds_init(dev_priv); |
| |
| intel_crt_init(dev_priv); |
| |
| if (intel_de_read(dev_priv, GEN3_SDVOB) & SDVO_DETECTED) { |
| drm_dbg_kms(&dev_priv->drm, "probing SDVOB\n"); |
| found = intel_sdvo_init(dev_priv, GEN3_SDVOB, PORT_B); |
| if (!found && IS_G4X(dev_priv)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "probing HDMI on SDVOB\n"); |
| g4x_hdmi_init(dev_priv, GEN4_HDMIB, PORT_B); |
| } |
| |
| if (!found && IS_G4X(dev_priv)) |
| g4x_dp_init(dev_priv, DP_B, PORT_B); |
| } |
| |
| /* Before G4X SDVOC doesn't have its own detect register */ |
| |
| if (intel_de_read(dev_priv, GEN3_SDVOB) & SDVO_DETECTED) { |
| drm_dbg_kms(&dev_priv->drm, "probing SDVOC\n"); |
| found = intel_sdvo_init(dev_priv, GEN3_SDVOC, PORT_C); |
| } |
| |
| if (!found && (intel_de_read(dev_priv, GEN3_SDVOC) & SDVO_DETECTED)) { |
| |
| if (IS_G4X(dev_priv)) { |
| drm_dbg_kms(&dev_priv->drm, |
| "probing HDMI on SDVOC\n"); |
| g4x_hdmi_init(dev_priv, GEN4_HDMIC, PORT_C); |
| } |
| if (IS_G4X(dev_priv)) |
| g4x_dp_init(dev_priv, DP_C, PORT_C); |
| } |
| |
| if (IS_G4X(dev_priv) && (intel_de_read(dev_priv, DP_D) & DP_DETECTED)) |
| g4x_dp_init(dev_priv, DP_D, PORT_D); |
| |
| if (SUPPORTS_TV(dev_priv)) |
| intel_tv_init(dev_priv); |
| } else if (DISPLAY_VER(dev_priv) == 2) { |
| if (IS_I85X(dev_priv)) |
| intel_lvds_init(dev_priv); |
| |
| intel_crt_init(dev_priv); |
| intel_dvo_init(dev_priv); |
| } |
| |
| for_each_intel_encoder(&dev_priv->drm, encoder) { |
| encoder->base.possible_crtcs = |
| intel_encoder_possible_crtcs(encoder); |
| encoder->base.possible_clones = |
| intel_encoder_possible_clones(encoder); |
| } |
| |
| intel_init_pch_refclk(dev_priv); |
| |
| drm_helper_move_panel_connectors_to_head(&dev_priv->drm); |
| } |
| |
| static int max_dotclock(struct drm_i915_private *i915) |
| { |
| int max_dotclock = i915->display.cdclk.max_dotclk_freq; |
| |
| /* icl+ might use joiner */ |
| if (DISPLAY_VER(i915) >= 11) |
| max_dotclock *= 2; |
| |
| return max_dotclock; |
| } |
| |
| enum drm_mode_status intel_mode_valid(struct drm_device *dev, |
| const struct drm_display_mode *mode) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| int hdisplay_max, htotal_max; |
| int vdisplay_max, vtotal_max; |
| |
| /* |
| * Can't reject DBLSCAN here because Xorg ddxen can add piles |
| * of DBLSCAN modes to the output's mode list when they detect |
| * the scaling mode property on the connector. And they don't |
| * ask the kernel to validate those modes in any way until |
| * modeset time at which point the client gets a protocol error. |
| * So in order to not upset those clients we silently ignore the |
| * DBLSCAN flag on such connectors. For other connectors we will |
| * reject modes with the DBLSCAN flag in encoder->compute_config(). |
| * And we always reject DBLSCAN modes in connector->mode_valid() |
| * as we never want such modes on the connector's mode list. |
| */ |
| |
| if (mode->vscan > 1) |
| return MODE_NO_VSCAN; |
| |
| if (mode->flags & DRM_MODE_FLAG_HSKEW) |
| return MODE_H_ILLEGAL; |
| |
| if (mode->flags & (DRM_MODE_FLAG_CSYNC | |
| DRM_MODE_FLAG_NCSYNC | |
| DRM_MODE_FLAG_PCSYNC)) |
| return MODE_HSYNC; |
| |
| if (mode->flags & (DRM_MODE_FLAG_BCAST | |
| DRM_MODE_FLAG_PIXMUX | |
| DRM_MODE_FLAG_CLKDIV2)) |
| return MODE_BAD; |
| |
| /* |
| * Reject clearly excessive dotclocks early to |
| * avoid having to worry about huge integers later. |
| */ |
| if (mode->clock > max_dotclock(dev_priv)) |
| return MODE_CLOCK_HIGH; |
| |
| /* Transcoder timing limits */ |
| if (DISPLAY_VER(dev_priv) >= 11) { |
| hdisplay_max = 16384; |
| vdisplay_max = 8192; |
| htotal_max = 16384; |
| vtotal_max = 8192; |
| } else if (DISPLAY_VER(dev_priv) >= 9 || |
| IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) { |
| hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */ |
| vdisplay_max = 4096; |
| htotal_max = 8192; |
| vtotal_max = 8192; |
| } else if (DISPLAY_VER(dev_priv) >= 3) { |
| hdisplay_max = 4096; |
| vdisplay_max = 4096; |
| htotal_max = 8192; |
| vtotal_max = 8192; |
| } else { |
| hdisplay_max = 2048; |
| vdisplay_max = 2048; |
| htotal_max = 4096; |
| vtotal_max = 4096; |
| } |
| |
| if (mode->hdisplay > hdisplay_max || |
| mode->hsync_start > htotal_max || |
| mode->hsync_end > htotal_max || |
| mode->htotal > htotal_max) |
| return MODE_H_ILLEGAL; |
| |
| if (mode->vdisplay > vdisplay_max || |
| mode->vsync_start > vtotal_max || |
| mode->vsync_end > vtotal_max || |
| mode->vtotal > vtotal_max) |
| return MODE_V_ILLEGAL; |
| |
| return MODE_OK; |
| } |
| |
| enum drm_mode_status intel_cpu_transcoder_mode_valid(struct drm_i915_private *dev_priv, |
| const struct drm_display_mode *mode) |
| { |
| /* |
| * Additional transcoder timing limits, |
| * excluding BXT/GLK DSI transcoders. |
| */ |
| if (DISPLAY_VER(dev_priv) >= 5) { |
| if (mode->hdisplay < 64 || |
| mode->htotal - mode->hdisplay < 32) |
| return MODE_H_ILLEGAL; |
| |
| if (mode->vtotal - mode->vdisplay < 5) |
| return MODE_V_ILLEGAL; |
| } else { |
| if (mode->htotal - mode->hdisplay < 32) |
| return MODE_H_ILLEGAL; |
| |
| if (mode->vtotal - mode->vdisplay < 3) |
| return MODE_V_ILLEGAL; |
| } |
| |
| /* |
| * Cantiga+ cannot handle modes with a hsync front porch of 0. |
| * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw. |
| */ |
| if ((DISPLAY_VER(dev_priv) >= 5 || IS_G4X(dev_priv)) && |
| mode->hsync_start == mode->hdisplay) |
| return MODE_H_ILLEGAL; |
| |
| return MODE_OK; |
| } |
| |
| enum drm_mode_status |
| intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv, |
| const struct drm_display_mode *mode, |
| bool joiner) |
| { |
| int plane_width_max, plane_height_max; |
| |
| /* |
| * intel_mode_valid() should be |
| * sufficient on older platforms. |
| */ |
| if (DISPLAY_VER(dev_priv) < 9) |
| return MODE_OK; |
| |
| /* |
| * Most people will probably want a fullscreen |
| * plane so let's not advertize modes that are |
| * too big for that. |
| */ |
| if (DISPLAY_VER(dev_priv) >= 11) { |
| plane_width_max = 5120 << joiner; |
| plane_height_max = 4320; |
| } else { |
| plane_width_max = 5120; |
| plane_height_max = 4096; |
| } |
| |
| if (mode->hdisplay > plane_width_max) |
| return MODE_H_ILLEGAL; |
| |
| if (mode->vdisplay > plane_height_max) |
| return MODE_V_ILLEGAL; |
| |
| return MODE_OK; |
| } |
| |
| static const struct intel_display_funcs skl_display_funcs = { |
| .get_pipe_config = hsw_get_pipe_config, |
| .crtc_enable = hsw_crtc_enable, |
| .crtc_disable = hsw_crtc_disable, |
| .commit_modeset_enables = skl_commit_modeset_enables, |
| .get_initial_plane_config = skl_get_initial_plane_config, |
| .fixup_initial_plane_config = skl_fixup_initial_plane_config, |
| }; |
| |
| static const struct intel_display_funcs ddi_display_funcs = { |
| .get_pipe_config = hsw_get_pipe_config, |
| .crtc_enable = hsw_crtc_enable, |
| .crtc_disable = hsw_crtc_disable, |
| .commit_modeset_enables = intel_commit_modeset_enables, |
| .get_initial_plane_config = i9xx_get_initial_plane_config, |
| .fixup_initial_plane_config = i9xx_fixup_initial_plane_config, |
| }; |
| |
| static const struct intel_display_funcs pch_split_display_funcs = { |
| .get_pipe_config = ilk_get_pipe_config, |
| .crtc_enable = ilk_crtc_enable, |
| .crtc_disable = ilk_crtc_disable, |
| .commit_modeset_enables = intel_commit_modeset_enables, |
| .get_initial_plane_config = i9xx_get_initial_plane_config, |
| .fixup_initial_plane_config = i9xx_fixup_initial_plane_config, |
| }; |
| |
| static const struct intel_display_funcs vlv_display_funcs = { |
| .get_pipe_config = i9xx_get_pipe_config, |
| .crtc_enable = valleyview_crtc_enable, |
| .crtc_disable = i9xx_crtc_disable, |
| .commit_modeset_enables = intel_commit_modeset_enables, |
| .get_initial_plane_config = i9xx_get_initial_plane_config, |
| .fixup_initial_plane_config = i9xx_fixup_initial_plane_config, |
| }; |
| |
| static const struct intel_display_funcs i9xx_display_funcs = { |
| .get_pipe_config = i9xx_get_pipe_config, |
| .crtc_enable = i9xx_crtc_enable, |
| .crtc_disable = i9xx_crtc_disable, |
| .commit_modeset_enables = intel_commit_modeset_enables, |
| .get_initial_plane_config = i9xx_get_initial_plane_config, |
| .fixup_initial_plane_config = i9xx_fixup_initial_plane_config, |
| }; |
| |
| /** |
| * intel_init_display_hooks - initialize the display modesetting hooks |
| * @dev_priv: device private |
| */ |
| void intel_init_display_hooks(struct drm_i915_private *dev_priv) |
| { |
| if (DISPLAY_VER(dev_priv) >= 9) { |
| dev_priv->display.funcs.display = &skl_display_funcs; |
| } else if (HAS_DDI(dev_priv)) { |
| dev_priv->display.funcs.display = &ddi_display_funcs; |
| } else if (HAS_PCH_SPLIT(dev_priv)) { |
| dev_priv->display.funcs.display = &pch_split_display_funcs; |
| } else if (IS_CHERRYVIEW(dev_priv) || |
| IS_VALLEYVIEW(dev_priv)) { |
| dev_priv->display.funcs.display = &vlv_display_funcs; |
| } else { |
| dev_priv->display.funcs.display = &i9xx_display_funcs; |
| } |
| } |
| |
| int intel_initial_commit(struct drm_device *dev) |
| { |
| struct drm_atomic_state *state = NULL; |
| struct drm_modeset_acquire_ctx ctx; |
| struct intel_crtc *crtc; |
| int ret = 0; |
| |
| state = drm_atomic_state_alloc(dev); |
| if (!state) |
| return -ENOMEM; |
| |
| drm_modeset_acquire_init(&ctx, 0); |
| |
| state->acquire_ctx = &ctx; |
| to_intel_atomic_state(state)->internal = true; |
| |
| retry: |
| for_each_intel_crtc(dev, crtc) { |
| struct intel_crtc_state *crtc_state = |
| intel_atomic_get_crtc_state(state, crtc); |
| |
| if (IS_ERR(crtc_state)) { |
| ret = PTR_ERR(crtc_state); |
| goto out; |
| } |
| |
| if (crtc_state->hw.active) { |
| struct intel_encoder *encoder; |
| |
| ret = drm_atomic_add_affected_planes(state, &crtc->base); |
| if (ret) |
| goto out; |
| |
| /* |
| * FIXME hack to force a LUT update to avoid the |
| * plane update forcing the pipe gamma on without |
| * having a proper LUT loaded. Remove once we |
| * have readout for pipe gamma enable. |
| */ |
| crtc_state->uapi.color_mgmt_changed = true; |
| |
| for_each_intel_encoder_mask(dev, encoder, |
| crtc_state->uapi.encoder_mask) { |
| if (encoder->initial_fastset_check && |
| !encoder->initial_fastset_check(encoder, crtc_state)) { |
| ret = drm_atomic_add_affected_connectors(state, |
| &crtc->base); |
| if (ret) |
| goto out; |
| } |
| } |
| } |
| } |
| |
| ret = drm_atomic_commit(state); |
| |
| out: |
| if (ret == -EDEADLK) { |
| drm_atomic_state_clear(state); |
| drm_modeset_backoff(&ctx); |
| goto retry; |
| } |
| |
| drm_atomic_state_put(state); |
| |
| drm_modeset_drop_locks(&ctx); |
| drm_modeset_acquire_fini(&ctx); |
| |
| return ret; |
| } |
| |
| void i830_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe) |
| { |
| struct intel_crtc *crtc = intel_crtc_for_pipe(dev_priv, pipe); |
| enum transcoder cpu_transcoder = (enum transcoder)pipe; |
| /* 640x480@60Hz, ~25175 kHz */ |
| struct dpll clock = { |
| .m1 = 18, |
| .m2 = 7, |
| .p1 = 13, |
| .p2 = 4, |
| .n = 2, |
| }; |
| u32 dpll, fp; |
| int i; |
| |
| drm_WARN_ON(&dev_priv->drm, |
| i9xx_calc_dpll_params(48000, &clock) != 25154); |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "enabling pipe %c due to force quirk (vco=%d dot=%d)\n", |
| pipe_name(pipe), clock.vco, clock.dot); |
| |
| fp = i9xx_dpll_compute_fp(&clock); |
| dpll = DPLL_DVO_2X_MODE | |
| DPLL_VGA_MODE_DIS | |
| ((clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT) | |
| PLL_P2_DIVIDE_BY_4 | |
| PLL_REF_INPUT_DREFCLK | |
| DPLL_VCO_ENABLE; |
| |
| intel_de_write(dev_priv, TRANS_HTOTAL(dev_priv, cpu_transcoder), |
| HACTIVE(640 - 1) | HTOTAL(800 - 1)); |
| intel_de_write(dev_priv, TRANS_HBLANK(dev_priv, cpu_transcoder), |
| HBLANK_START(640 - 1) | HBLANK_END(800 - 1)); |
| intel_de_write(dev_priv, TRANS_HSYNC(dev_priv, cpu_transcoder), |
| HSYNC_START(656 - 1) | HSYNC_END(752 - 1)); |
| intel_de_write(dev_priv, TRANS_VTOTAL(dev_priv, cpu_transcoder), |
| VACTIVE(480 - 1) | VTOTAL(525 - 1)); |
| intel_de_write(dev_priv, TRANS_VBLANK(dev_priv, cpu_transcoder), |
| VBLANK_START(480 - 1) | VBLANK_END(525 - 1)); |
| intel_de_write(dev_priv, TRANS_VSYNC(dev_priv, cpu_transcoder), |
| VSYNC_START(490 - 1) | VSYNC_END(492 - 1)); |
| intel_de_write(dev_priv, PIPESRC(dev_priv, pipe), |
| PIPESRC_WIDTH(640 - 1) | PIPESRC_HEIGHT(480 - 1)); |
| |
| intel_de_write(dev_priv, FP0(pipe), fp); |
| intel_de_write(dev_priv, FP1(pipe), fp); |
| |
| /* |
| * Apparently we need to have VGA mode enabled prior to changing |
| * the P1/P2 dividers. Otherwise the DPLL will keep using the old |
| * dividers, even though the register value does change. |
| */ |
| intel_de_write(dev_priv, DPLL(dev_priv, pipe), |
| dpll & ~DPLL_VGA_MODE_DIS); |
| intel_de_write(dev_priv, DPLL(dev_priv, pipe), dpll); |
| |
| /* Wait for the clocks to stabilize. */ |
| intel_de_posting_read(dev_priv, DPLL(dev_priv, pipe)); |
| udelay(150); |
| |
| /* The pixel multiplier can only be updated once the |
| * DPLL is enabled and the clocks are stable. |
| * |
| * So write it again. |
| */ |
| intel_de_write(dev_priv, DPLL(dev_priv, pipe), dpll); |
| |
| /* We do this three times for luck */ |
| for (i = 0; i < 3 ; i++) { |
| intel_de_write(dev_priv, DPLL(dev_priv, pipe), dpll); |
| intel_de_posting_read(dev_priv, DPLL(dev_priv, pipe)); |
| udelay(150); /* wait for warmup */ |
| } |
| |
| intel_de_write(dev_priv, TRANSCONF(dev_priv, pipe), TRANSCONF_ENABLE); |
| intel_de_posting_read(dev_priv, TRANSCONF(dev_priv, pipe)); |
| |
| intel_wait_for_pipe_scanline_moving(crtc); |
| } |
| |
| void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe) |
| { |
| struct intel_crtc *crtc = intel_crtc_for_pipe(dev_priv, pipe); |
| |
| drm_dbg_kms(&dev_priv->drm, "disabling pipe %c due to force quirk\n", |
| pipe_name(pipe)); |
| |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, DSPCNTR(dev_priv, PLANE_A)) & DISP_ENABLE); |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, DSPCNTR(dev_priv, PLANE_B)) & DISP_ENABLE); |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, DSPCNTR(dev_priv, PLANE_C)) & DISP_ENABLE); |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, CURCNTR(dev_priv, PIPE_A)) & MCURSOR_MODE_MASK); |
| drm_WARN_ON(&dev_priv->drm, |
| intel_de_read(dev_priv, CURCNTR(dev_priv, PIPE_B)) & MCURSOR_MODE_MASK); |
| |
| intel_de_write(dev_priv, TRANSCONF(dev_priv, pipe), 0); |
| intel_de_posting_read(dev_priv, TRANSCONF(dev_priv, pipe)); |
| |
| intel_wait_for_pipe_scanline_stopped(crtc); |
| |
| intel_de_write(dev_priv, DPLL(dev_priv, pipe), DPLL_VGA_MODE_DIS); |
| intel_de_posting_read(dev_priv, DPLL(dev_priv, pipe)); |
| } |
| |
| void intel_hpd_poll_fini(struct drm_i915_private *i915) |
| { |
| struct intel_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| |
| /* Kill all the work that may have been queued by hpd. */ |
| drm_connector_list_iter_begin(&i915->drm, &conn_iter); |
| for_each_intel_connector_iter(connector, &conn_iter) { |
| if (connector->modeset_retry_work.func && |
| cancel_work_sync(&connector->modeset_retry_work)) |
| drm_connector_put(&connector->base); |
| if (connector->hdcp.shim) { |
| cancel_delayed_work_sync(&connector->hdcp.check_work); |
| cancel_work_sync(&connector->hdcp.prop_work); |
| } |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| } |
| |
| bool intel_scanout_needs_vtd_wa(struct drm_i915_private *i915) |
| { |
| return DISPLAY_VER(i915) >= 6 && i915_vtd_active(i915); |
| } |