| // SPDX-License-Identifier: MIT |
| /* |
| * Copyright © 2020 Intel Corporation |
| */ |
| |
| #include <linux/string_helpers.h> |
| |
| #include <drm/drm_debugfs.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_fourcc.h> |
| |
| #include "hsw_ips.h" |
| #include "i915_debugfs.h" |
| #include "i915_irq.h" |
| #include "i915_reg.h" |
| #include "intel_alpm.h" |
| #include "intel_crtc.h" |
| #include "intel_de.h" |
| #include "intel_crtc_state_dump.h" |
| #include "intel_display_debugfs.h" |
| #include "intel_display_debugfs_params.h" |
| #include "intel_display_power.h" |
| #include "intel_display_power_well.h" |
| #include "intel_display_types.h" |
| #include "intel_dmc.h" |
| #include "intel_dp.h" |
| #include "intel_dp_link_training.h" |
| #include "intel_dp_mst.h" |
| #include "intel_drrs.h" |
| #include "intel_fbc.h" |
| #include "intel_fbdev.h" |
| #include "intel_hdcp.h" |
| #include "intel_hdmi.h" |
| #include "intel_hotplug.h" |
| #include "intel_panel.h" |
| #include "intel_pps.h" |
| #include "intel_psr.h" |
| #include "intel_psr_regs.h" |
| #include "intel_wm.h" |
| |
| static inline struct drm_i915_private *node_to_i915(struct drm_info_node *node) |
| { |
| return to_i915(node->minor->dev); |
| } |
| |
| static int i915_frontbuffer_tracking(struct seq_file *m, void *unused) |
| { |
| struct drm_i915_private *dev_priv = node_to_i915(m->private); |
| |
| spin_lock(&dev_priv->display.fb_tracking.lock); |
| |
| seq_printf(m, "FB tracking busy bits: 0x%08x\n", |
| dev_priv->display.fb_tracking.busy_bits); |
| |
| seq_printf(m, "FB tracking flip bits: 0x%08x\n", |
| dev_priv->display.fb_tracking.flip_bits); |
| |
| spin_unlock(&dev_priv->display.fb_tracking.lock); |
| |
| return 0; |
| } |
| |
| static int i915_sr_status(struct seq_file *m, void *unused) |
| { |
| struct drm_i915_private *dev_priv = node_to_i915(m->private); |
| intel_wakeref_t wakeref; |
| bool sr_enabled = false; |
| |
| wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_INIT); |
| |
| if (DISPLAY_VER(dev_priv) >= 9) |
| /* no global SR status; inspect per-plane WM */; |
| else if (HAS_PCH_SPLIT(dev_priv)) |
| sr_enabled = intel_de_read(dev_priv, WM1_LP_ILK) & WM_LP_ENABLE; |
| else if (IS_I965GM(dev_priv) || IS_G4X(dev_priv) || |
| IS_I945G(dev_priv) || IS_I945GM(dev_priv)) |
| sr_enabled = intel_de_read(dev_priv, FW_BLC_SELF) & FW_BLC_SELF_EN; |
| else if (IS_I915GM(dev_priv)) |
| sr_enabled = intel_de_read(dev_priv, INSTPM) & INSTPM_SELF_EN; |
| else if (IS_PINEVIEW(dev_priv)) |
| sr_enabled = intel_de_read(dev_priv, DSPFW3(dev_priv)) & PINEVIEW_SELF_REFRESH_EN; |
| else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| sr_enabled = intel_de_read(dev_priv, FW_BLC_SELF_VLV) & FW_CSPWRDWNEN; |
| |
| intel_display_power_put(dev_priv, POWER_DOMAIN_INIT, wakeref); |
| |
| seq_printf(m, "self-refresh: %s\n", str_enabled_disabled(sr_enabled)); |
| |
| return 0; |
| } |
| |
| static int i915_gem_framebuffer_info(struct seq_file *m, void *data) |
| { |
| struct drm_i915_private *dev_priv = node_to_i915(m->private); |
| struct intel_framebuffer *fbdev_fb = NULL; |
| struct drm_framebuffer *drm_fb; |
| |
| #ifdef CONFIG_DRM_FBDEV_EMULATION |
| fbdev_fb = intel_fbdev_framebuffer(dev_priv->display.fbdev.fbdev); |
| if (fbdev_fb) { |
| seq_printf(m, "fbcon size: %d x %d, depth %d, %d bpp, modifier 0x%llx, refcount %d, obj ", |
| fbdev_fb->base.width, |
| fbdev_fb->base.height, |
| fbdev_fb->base.format->depth, |
| fbdev_fb->base.format->cpp[0] * 8, |
| fbdev_fb->base.modifier, |
| drm_framebuffer_read_refcount(&fbdev_fb->base)); |
| i915_debugfs_describe_obj(m, intel_fb_obj(&fbdev_fb->base)); |
| seq_putc(m, '\n'); |
| } |
| #endif |
| |
| mutex_lock(&dev_priv->drm.mode_config.fb_lock); |
| drm_for_each_fb(drm_fb, &dev_priv->drm) { |
| struct intel_framebuffer *fb = to_intel_framebuffer(drm_fb); |
| if (fb == fbdev_fb) |
| continue; |
| |
| seq_printf(m, "user size: %d x %d, depth %d, %d bpp, modifier 0x%llx, refcount %d, obj ", |
| fb->base.width, |
| fb->base.height, |
| fb->base.format->depth, |
| fb->base.format->cpp[0] * 8, |
| fb->base.modifier, |
| drm_framebuffer_read_refcount(&fb->base)); |
| i915_debugfs_describe_obj(m, intel_fb_obj(&fb->base)); |
| seq_putc(m, '\n'); |
| } |
| mutex_unlock(&dev_priv->drm.mode_config.fb_lock); |
| |
| return 0; |
| } |
| |
| static int i915_power_domain_info(struct seq_file *m, void *unused) |
| { |
| struct drm_i915_private *i915 = node_to_i915(m->private); |
| |
| intel_display_power_debug(i915, m); |
| |
| return 0; |
| } |
| |
| static void intel_seq_print_mode(struct seq_file *m, int tabs, |
| const struct drm_display_mode *mode) |
| { |
| int i; |
| |
| for (i = 0; i < tabs; i++) |
| seq_putc(m, '\t'); |
| |
| seq_printf(m, DRM_MODE_FMT "\n", DRM_MODE_ARG(mode)); |
| } |
| |
| static void intel_encoder_info(struct seq_file *m, |
| struct intel_crtc *crtc, |
| struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = node_to_i915(m->private); |
| struct drm_connector_list_iter conn_iter; |
| struct drm_connector *connector; |
| |
| seq_printf(m, "\t[ENCODER:%d:%s]: connectors:\n", |
| encoder->base.base.id, encoder->base.name); |
| |
| drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| const struct drm_connector_state *conn_state = |
| connector->state; |
| |
| if (conn_state->best_encoder != &encoder->base) |
| continue; |
| |
| seq_printf(m, "\t\t[CONNECTOR:%d:%s]\n", |
| connector->base.id, connector->name); |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| } |
| |
| static void intel_panel_info(struct seq_file *m, |
| struct intel_connector *connector) |
| { |
| const struct drm_display_mode *fixed_mode; |
| |
| if (list_empty(&connector->panel.fixed_modes)) |
| return; |
| |
| seq_puts(m, "\tfixed modes:\n"); |
| |
| list_for_each_entry(fixed_mode, &connector->panel.fixed_modes, head) |
| intel_seq_print_mode(m, 2, fixed_mode); |
| } |
| |
| static void intel_hdcp_info(struct seq_file *m, |
| struct intel_connector *intel_connector, |
| bool remote_req) |
| { |
| bool hdcp_cap = false, hdcp2_cap = false; |
| |
| if (!intel_connector->hdcp.shim) { |
| seq_puts(m, "No Connector Support"); |
| goto out; |
| } |
| |
| if (remote_req) { |
| intel_hdcp_get_remote_capability(intel_connector, |
| &hdcp_cap, |
| &hdcp2_cap); |
| } else { |
| hdcp_cap = intel_hdcp_get_capability(intel_connector); |
| hdcp2_cap = intel_hdcp2_get_capability(intel_connector); |
| } |
| |
| if (hdcp_cap) |
| seq_puts(m, "HDCP1.4 "); |
| if (hdcp2_cap) |
| seq_puts(m, "HDCP2.2 "); |
| |
| if (!hdcp_cap && !hdcp2_cap) |
| seq_puts(m, "None"); |
| |
| out: |
| seq_puts(m, "\n"); |
| } |
| |
| static void intel_dp_info(struct seq_file *m, struct intel_connector *connector) |
| { |
| struct intel_encoder *intel_encoder = intel_attached_encoder(connector); |
| struct intel_dp *intel_dp = enc_to_intel_dp(intel_encoder); |
| |
| seq_printf(m, "\tDPCD rev: %x\n", intel_dp->dpcd[DP_DPCD_REV]); |
| seq_printf(m, "\taudio support: %s\n", |
| str_yes_no(connector->base.display_info.has_audio)); |
| |
| drm_dp_downstream_debug(m, intel_dp->dpcd, intel_dp->downstream_ports, |
| connector->detect_edid, &intel_dp->aux); |
| } |
| |
| static void intel_dp_mst_info(struct seq_file *m, |
| struct intel_connector *connector) |
| { |
| bool has_audio = connector->base.display_info.has_audio; |
| |
| seq_printf(m, "\taudio support: %s\n", str_yes_no(has_audio)); |
| } |
| |
| static void intel_hdmi_info(struct seq_file *m, |
| struct intel_connector *connector) |
| { |
| bool has_audio = connector->base.display_info.has_audio; |
| |
| seq_printf(m, "\taudio support: %s\n", str_yes_no(has_audio)); |
| } |
| |
| static void intel_connector_info(struct seq_file *m, |
| struct drm_connector *connector) |
| { |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| const struct drm_display_mode *mode; |
| |
| seq_printf(m, "[CONNECTOR:%d:%s]: status: %s\n", |
| connector->base.id, connector->name, |
| drm_get_connector_status_name(connector->status)); |
| |
| if (connector->status == connector_status_disconnected) |
| return; |
| |
| seq_printf(m, "\tphysical dimensions: %dx%dmm\n", |
| connector->display_info.width_mm, |
| connector->display_info.height_mm); |
| seq_printf(m, "\tsubpixel order: %s\n", |
| drm_get_subpixel_order_name(connector->display_info.subpixel_order)); |
| seq_printf(m, "\tCEA rev: %d\n", connector->display_info.cea_rev); |
| |
| switch (connector->connector_type) { |
| case DRM_MODE_CONNECTOR_DisplayPort: |
| case DRM_MODE_CONNECTOR_eDP: |
| if (intel_connector->mst_port) |
| intel_dp_mst_info(m, intel_connector); |
| else |
| intel_dp_info(m, intel_connector); |
| break; |
| case DRM_MODE_CONNECTOR_HDMIA: |
| intel_hdmi_info(m, intel_connector); |
| break; |
| default: |
| break; |
| } |
| |
| seq_puts(m, "\tHDCP version: "); |
| if (intel_connector->mst_port) { |
| intel_hdcp_info(m, intel_connector, true); |
| seq_puts(m, "\tMST Hub HDCP version: "); |
| } |
| intel_hdcp_info(m, intel_connector, false); |
| |
| seq_printf(m, "\tmax bpc: %u\n", connector->display_info.bpc); |
| |
| intel_panel_info(m, intel_connector); |
| |
| seq_printf(m, "\tmodes:\n"); |
| list_for_each_entry(mode, &connector->modes, head) |
| intel_seq_print_mode(m, 2, mode); |
| } |
| |
| static const char *plane_type(enum drm_plane_type type) |
| { |
| switch (type) { |
| case DRM_PLANE_TYPE_OVERLAY: |
| return "OVL"; |
| case DRM_PLANE_TYPE_PRIMARY: |
| return "PRI"; |
| case DRM_PLANE_TYPE_CURSOR: |
| return "CUR"; |
| /* |
| * Deliberately omitting default: to generate compiler warnings |
| * when a new drm_plane_type gets added. |
| */ |
| } |
| |
| return "unknown"; |
| } |
| |
| static void plane_rotation(char *buf, size_t bufsize, unsigned int rotation) |
| { |
| /* |
| * According to doc only one DRM_MODE_ROTATE_ is allowed but this |
| * will print them all to visualize if the values are misused |
| */ |
| snprintf(buf, bufsize, |
| "%s%s%s%s%s%s(0x%08x)", |
| (rotation & DRM_MODE_ROTATE_0) ? "0 " : "", |
| (rotation & DRM_MODE_ROTATE_90) ? "90 " : "", |
| (rotation & DRM_MODE_ROTATE_180) ? "180 " : "", |
| (rotation & DRM_MODE_ROTATE_270) ? "270 " : "", |
| (rotation & DRM_MODE_REFLECT_X) ? "FLIPX " : "", |
| (rotation & DRM_MODE_REFLECT_Y) ? "FLIPY " : "", |
| rotation); |
| } |
| |
| static const char *plane_visibility(const struct intel_plane_state *plane_state) |
| { |
| if (plane_state->uapi.visible) |
| return "visible"; |
| |
| if (plane_state->planar_slave) |
| return "planar-slave"; |
| |
| return "hidden"; |
| } |
| |
| static void intel_plane_uapi_info(struct seq_file *m, struct intel_plane *plane) |
| { |
| const struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| const struct drm_framebuffer *fb = plane_state->uapi.fb; |
| struct drm_rect src, dst; |
| char rot_str[48]; |
| |
| src = drm_plane_state_src(&plane_state->uapi); |
| dst = drm_plane_state_dest(&plane_state->uapi); |
| |
| plane_rotation(rot_str, sizeof(rot_str), |
| plane_state->uapi.rotation); |
| |
| seq_puts(m, "\t\tuapi: [FB:"); |
| if (fb) |
| seq_printf(m, "%d] %p4cc,0x%llx,%dx%d", fb->base.id, |
| &fb->format->format, fb->modifier, fb->width, |
| fb->height); |
| else |
| seq_puts(m, "0] n/a,0x0,0x0,"); |
| seq_printf(m, ", visible=%s, src=" DRM_RECT_FP_FMT ", dst=" DRM_RECT_FMT |
| ", rotation=%s\n", plane_visibility(plane_state), |
| DRM_RECT_FP_ARG(&src), DRM_RECT_ARG(&dst), rot_str); |
| |
| if (plane_state->planar_linked_plane) |
| seq_printf(m, "\t\tplanar: Linked to [PLANE:%d:%s] as a %s\n", |
| plane_state->planar_linked_plane->base.base.id, plane_state->planar_linked_plane->base.name, |
| plane_state->planar_slave ? "slave" : "master"); |
| } |
| |
| static void intel_plane_hw_info(struct seq_file *m, struct intel_plane *plane) |
| { |
| const struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| const struct drm_framebuffer *fb = plane_state->hw.fb; |
| char rot_str[48]; |
| |
| if (!fb) |
| return; |
| |
| plane_rotation(rot_str, sizeof(rot_str), |
| plane_state->hw.rotation); |
| |
| seq_printf(m, "\t\thw: [FB:%d] %p4cc,0x%llx,%dx%d, visible=%s, src=" |
| DRM_RECT_FP_FMT ", dst=" DRM_RECT_FMT ", rotation=%s\n", |
| fb->base.id, &fb->format->format, |
| fb->modifier, fb->width, fb->height, |
| str_yes_no(plane_state->uapi.visible), |
| DRM_RECT_FP_ARG(&plane_state->uapi.src), |
| DRM_RECT_ARG(&plane_state->uapi.dst), |
| rot_str); |
| } |
| |
| static void intel_plane_info(struct seq_file *m, struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = node_to_i915(m->private); |
| struct intel_plane *plane; |
| |
| for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) { |
| seq_printf(m, "\t[PLANE:%d:%s]: type=%s\n", |
| plane->base.base.id, plane->base.name, |
| plane_type(plane->base.type)); |
| intel_plane_uapi_info(m, plane); |
| intel_plane_hw_info(m, plane); |
| } |
| } |
| |
| static void intel_scaler_info(struct seq_file *m, struct intel_crtc *crtc) |
| { |
| const struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| int num_scalers = crtc->num_scalers; |
| int i; |
| |
| /* Not all platformas have a scaler */ |
| if (num_scalers) { |
| seq_printf(m, "\tnum_scalers=%d, scaler_users=%x scaler_id=%d scaling_filter=%d", |
| num_scalers, |
| crtc_state->scaler_state.scaler_users, |
| crtc_state->scaler_state.scaler_id, |
| crtc_state->hw.scaling_filter); |
| |
| for (i = 0; i < num_scalers; i++) { |
| const struct intel_scaler *sc = |
| &crtc_state->scaler_state.scalers[i]; |
| |
| seq_printf(m, ", scalers[%d]: use=%s, mode=%x", |
| i, str_yes_no(sc->in_use), sc->mode); |
| } |
| seq_puts(m, "\n"); |
| } else { |
| seq_puts(m, "\tNo scalers available on this platform\n"); |
| } |
| } |
| |
| #if IS_ENABLED(CONFIG_DRM_I915_DEBUG_VBLANK_EVADE) |
| static void crtc_updates_info(struct seq_file *m, |
| struct intel_crtc *crtc, |
| const char *hdr) |
| { |
| u64 count; |
| int row; |
| |
| count = 0; |
| for (row = 0; row < ARRAY_SIZE(crtc->debug.vbl.times); row++) |
| count += crtc->debug.vbl.times[row]; |
| seq_printf(m, "%sUpdates: %llu\n", hdr, count); |
| if (!count) |
| return; |
| |
| for (row = 0; row < ARRAY_SIZE(crtc->debug.vbl.times); row++) { |
| char columns[80] = " |"; |
| unsigned int x; |
| |
| if (row & 1) { |
| const char *units; |
| |
| if (row > 10) { |
| x = 1000000; |
| units = "ms"; |
| } else { |
| x = 1000; |
| units = "us"; |
| } |
| |
| snprintf(columns, sizeof(columns), "%4ld%s |", |
| DIV_ROUND_CLOSEST(BIT(row + 9), x), units); |
| } |
| |
| if (crtc->debug.vbl.times[row]) { |
| x = ilog2(crtc->debug.vbl.times[row]); |
| memset(columns + 8, '*', x); |
| columns[8 + x] = '\0'; |
| } |
| |
| seq_printf(m, "%s%s\n", hdr, columns); |
| } |
| |
| seq_printf(m, "%sMin update: %lluns\n", |
| hdr, crtc->debug.vbl.min); |
| seq_printf(m, "%sMax update: %lluns\n", |
| hdr, crtc->debug.vbl.max); |
| seq_printf(m, "%sAverage update: %lluns\n", |
| hdr, div64_u64(crtc->debug.vbl.sum, count)); |
| seq_printf(m, "%sOverruns > %uus: %u\n", |
| hdr, VBLANK_EVASION_TIME_US, crtc->debug.vbl.over); |
| } |
| |
| static int crtc_updates_show(struct seq_file *m, void *data) |
| { |
| crtc_updates_info(m, m->private, ""); |
| return 0; |
| } |
| |
| static int crtc_updates_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, crtc_updates_show, inode->i_private); |
| } |
| |
| static ssize_t crtc_updates_write(struct file *file, |
| const char __user *ubuf, |
| size_t len, loff_t *offp) |
| { |
| struct seq_file *m = file->private_data; |
| struct intel_crtc *crtc = m->private; |
| |
| /* May race with an update. Meh. */ |
| memset(&crtc->debug.vbl, 0, sizeof(crtc->debug.vbl)); |
| |
| return len; |
| } |
| |
| static const struct file_operations crtc_updates_fops = { |
| .owner = THIS_MODULE, |
| .open = crtc_updates_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .write = crtc_updates_write |
| }; |
| |
| static void crtc_updates_add(struct intel_crtc *crtc) |
| { |
| debugfs_create_file("i915_update_info", 0644, crtc->base.debugfs_entry, |
| crtc, &crtc_updates_fops); |
| } |
| |
| #else |
| static void crtc_updates_info(struct seq_file *m, |
| struct intel_crtc *crtc, |
| const char *hdr) |
| { |
| } |
| |
| static void crtc_updates_add(struct intel_crtc *crtc) |
| { |
| } |
| #endif |
| |
| static void intel_crtc_info(struct seq_file *m, struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = node_to_i915(m->private); |
| const struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| struct intel_encoder *encoder; |
| |
| seq_printf(m, "[CRTC:%d:%s]:\n", |
| crtc->base.base.id, crtc->base.name); |
| |
| seq_printf(m, "\tuapi: enable=%s, active=%s, mode=" DRM_MODE_FMT "\n", |
| str_yes_no(crtc_state->uapi.enable), |
| str_yes_no(crtc_state->uapi.active), |
| DRM_MODE_ARG(&crtc_state->uapi.mode)); |
| |
| seq_printf(m, "\thw: enable=%s, active=%s\n", |
| str_yes_no(crtc_state->hw.enable), str_yes_no(crtc_state->hw.active)); |
| seq_printf(m, "\tadjusted_mode=" DRM_MODE_FMT "\n", |
| DRM_MODE_ARG(&crtc_state->hw.adjusted_mode)); |
| seq_printf(m, "\tpipe__mode=" DRM_MODE_FMT "\n", |
| DRM_MODE_ARG(&crtc_state->hw.pipe_mode)); |
| |
| seq_printf(m, "\tpipe src=" DRM_RECT_FMT ", dither=%s, bpp=%d\n", |
| DRM_RECT_ARG(&crtc_state->pipe_src), |
| str_yes_no(crtc_state->dither), crtc_state->pipe_bpp); |
| |
| intel_scaler_info(m, crtc); |
| |
| if (crtc_state->joiner_pipes) |
| seq_printf(m, "\tLinked to 0x%x pipes as a %s\n", |
| crtc_state->joiner_pipes, |
| intel_crtc_is_joiner_secondary(crtc_state) ? "slave" : "master"); |
| |
| for_each_intel_encoder_mask(&dev_priv->drm, encoder, |
| crtc_state->uapi.encoder_mask) |
| intel_encoder_info(m, crtc, encoder); |
| |
| intel_plane_info(m, crtc); |
| |
| seq_printf(m, "\tunderrun reporting: cpu=%s pch=%s\n", |
| str_yes_no(!crtc->cpu_fifo_underrun_disabled), |
| str_yes_no(!crtc->pch_fifo_underrun_disabled)); |
| |
| crtc_updates_info(m, crtc, "\t"); |
| } |
| |
| static int i915_display_info(struct seq_file *m, void *unused) |
| { |
| struct drm_i915_private *dev_priv = node_to_i915(m->private); |
| struct intel_crtc *crtc; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| intel_wakeref_t wakeref; |
| |
| wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm); |
| |
| drm_modeset_lock_all(&dev_priv->drm); |
| |
| seq_printf(m, "CRTC info\n"); |
| seq_printf(m, "---------\n"); |
| for_each_intel_crtc(&dev_priv->drm, crtc) |
| intel_crtc_info(m, crtc); |
| |
| seq_printf(m, "\n"); |
| seq_printf(m, "Connector info\n"); |
| seq_printf(m, "--------------\n"); |
| drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) |
| intel_connector_info(m, connector); |
| drm_connector_list_iter_end(&conn_iter); |
| |
| drm_modeset_unlock_all(&dev_priv->drm); |
| |
| intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref); |
| |
| return 0; |
| } |
| |
| static int i915_display_capabilities(struct seq_file *m, void *unused) |
| { |
| struct drm_i915_private *i915 = node_to_i915(m->private); |
| struct drm_printer p = drm_seq_file_printer(m); |
| |
| intel_display_device_info_print(DISPLAY_INFO(i915), |
| DISPLAY_RUNTIME_INFO(i915), &p); |
| |
| return 0; |
| } |
| |
| static int i915_shared_dplls_info(struct seq_file *m, void *unused) |
| { |
| struct drm_i915_private *dev_priv = node_to_i915(m->private); |
| struct drm_printer p = drm_seq_file_printer(m); |
| struct intel_shared_dpll *pll; |
| int i; |
| |
| drm_modeset_lock_all(&dev_priv->drm); |
| |
| drm_printf(&p, "PLL refclks: non-SSC: %d kHz, SSC: %d kHz\n", |
| dev_priv->display.dpll.ref_clks.nssc, |
| dev_priv->display.dpll.ref_clks.ssc); |
| |
| for_each_shared_dpll(dev_priv, pll, i) { |
| drm_printf(&p, "DPLL%i: %s, id: %i\n", pll->index, |
| pll->info->name, pll->info->id); |
| drm_printf(&p, " pipe_mask: 0x%x, active: 0x%x, on: %s\n", |
| pll->state.pipe_mask, pll->active_mask, |
| str_yes_no(pll->on)); |
| drm_printf(&p, " tracked hardware state:\n"); |
| intel_dpll_dump_hw_state(dev_priv, &p, &pll->state.hw_state); |
| } |
| drm_modeset_unlock_all(&dev_priv->drm); |
| |
| return 0; |
| } |
| |
| static int i915_ddb_info(struct seq_file *m, void *unused) |
| { |
| struct drm_i915_private *dev_priv = node_to_i915(m->private); |
| struct skl_ddb_entry *entry; |
| struct intel_crtc *crtc; |
| |
| if (DISPLAY_VER(dev_priv) < 9) |
| return -ENODEV; |
| |
| drm_modeset_lock_all(&dev_priv->drm); |
| |
| seq_printf(m, "%-15s%8s%8s%8s\n", "", "Start", "End", "Size"); |
| |
| for_each_intel_crtc(&dev_priv->drm, crtc) { |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| enum pipe pipe = crtc->pipe; |
| enum plane_id plane_id; |
| |
| seq_printf(m, "Pipe %c\n", pipe_name(pipe)); |
| |
| for_each_plane_id_on_crtc(crtc, plane_id) { |
| entry = &crtc_state->wm.skl.plane_ddb[plane_id]; |
| seq_printf(m, " Plane%-8d%8u%8u%8u\n", plane_id + 1, |
| entry->start, entry->end, |
| skl_ddb_entry_size(entry)); |
| } |
| |
| entry = &crtc_state->wm.skl.plane_ddb[PLANE_CURSOR]; |
| seq_printf(m, " %-13s%8u%8u%8u\n", "Cursor", entry->start, |
| entry->end, skl_ddb_entry_size(entry)); |
| } |
| |
| drm_modeset_unlock_all(&dev_priv->drm); |
| |
| return 0; |
| } |
| |
| static bool |
| intel_lpsp_power_well_enabled(struct drm_i915_private *i915, |
| enum i915_power_well_id power_well_id) |
| { |
| intel_wakeref_t wakeref; |
| bool is_enabled; |
| |
| wakeref = intel_runtime_pm_get(&i915->runtime_pm); |
| is_enabled = intel_display_power_well_is_enabled(i915, |
| power_well_id); |
| intel_runtime_pm_put(&i915->runtime_pm, wakeref); |
| |
| return is_enabled; |
| } |
| |
| static int i915_lpsp_status(struct seq_file *m, void *unused) |
| { |
| struct drm_i915_private *i915 = node_to_i915(m->private); |
| bool lpsp_enabled = false; |
| |
| if (DISPLAY_VER(i915) >= 13 || IS_DISPLAY_VER(i915, 9, 10)) { |
| lpsp_enabled = !intel_lpsp_power_well_enabled(i915, SKL_DISP_PW_2); |
| } else if (IS_DISPLAY_VER(i915, 11, 12)) { |
| lpsp_enabled = !intel_lpsp_power_well_enabled(i915, ICL_DISP_PW_3); |
| } else if (IS_HASWELL(i915) || IS_BROADWELL(i915)) { |
| lpsp_enabled = !intel_lpsp_power_well_enabled(i915, HSW_DISP_PW_GLOBAL); |
| } else { |
| seq_puts(m, "LPSP: not supported\n"); |
| return 0; |
| } |
| |
| seq_printf(m, "LPSP: %s\n", str_enabled_disabled(lpsp_enabled)); |
| |
| return 0; |
| } |
| |
| static int i915_dp_mst_info(struct seq_file *m, void *unused) |
| { |
| struct drm_i915_private *dev_priv = node_to_i915(m->private); |
| struct intel_encoder *intel_encoder; |
| struct intel_digital_port *dig_port; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| |
| drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) |
| continue; |
| |
| intel_encoder = intel_attached_encoder(to_intel_connector(connector)); |
| if (!intel_encoder || intel_encoder->type == INTEL_OUTPUT_DP_MST) |
| continue; |
| |
| dig_port = enc_to_dig_port(intel_encoder); |
| if (!intel_dp_mst_source_support(&dig_port->dp)) |
| continue; |
| |
| seq_printf(m, "MST Source Port [ENCODER:%d:%s]\n", |
| dig_port->base.base.base.id, |
| dig_port->base.base.name); |
| drm_dp_mst_dump_topology(m, &dig_port->dp.mst_mgr); |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| return 0; |
| } |
| |
| static ssize_t i915_displayport_test_active_write(struct file *file, |
| const char __user *ubuf, |
| size_t len, loff_t *offp) |
| { |
| char *input_buffer; |
| int status = 0; |
| struct drm_device *dev; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| struct intel_dp *intel_dp; |
| int val = 0; |
| |
| dev = ((struct seq_file *)file->private_data)->private; |
| |
| if (len == 0) |
| return 0; |
| |
| input_buffer = memdup_user_nul(ubuf, len); |
| if (IS_ERR(input_buffer)) |
| return PTR_ERR(input_buffer); |
| |
| drm_dbg(dev, "Copied %d bytes from user\n", (unsigned int)len); |
| |
| drm_connector_list_iter_begin(dev, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| struct intel_encoder *encoder; |
| |
| if (connector->connector_type != |
| DRM_MODE_CONNECTOR_DisplayPort) |
| continue; |
| |
| encoder = to_intel_encoder(connector->encoder); |
| if (encoder && encoder->type == INTEL_OUTPUT_DP_MST) |
| continue; |
| |
| if (encoder && connector->status == connector_status_connected) { |
| intel_dp = enc_to_intel_dp(encoder); |
| status = kstrtoint(input_buffer, 10, &val); |
| if (status < 0) |
| break; |
| drm_dbg(dev, "Got %d for test active\n", val); |
| /* To prevent erroneous activation of the compliance |
| * testing code, only accept an actual value of 1 here |
| */ |
| if (val == 1) |
| intel_dp->compliance.test_active = true; |
| else |
| intel_dp->compliance.test_active = false; |
| } |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| kfree(input_buffer); |
| if (status < 0) |
| return status; |
| |
| *offp += len; |
| return len; |
| } |
| |
| static int i915_displayport_test_active_show(struct seq_file *m, void *data) |
| { |
| struct drm_i915_private *dev_priv = m->private; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| struct intel_dp *intel_dp; |
| |
| drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| struct intel_encoder *encoder; |
| |
| if (connector->connector_type != |
| DRM_MODE_CONNECTOR_DisplayPort) |
| continue; |
| |
| encoder = to_intel_encoder(connector->encoder); |
| if (encoder && encoder->type == INTEL_OUTPUT_DP_MST) |
| continue; |
| |
| if (encoder && connector->status == connector_status_connected) { |
| intel_dp = enc_to_intel_dp(encoder); |
| if (intel_dp->compliance.test_active) |
| seq_puts(m, "1"); |
| else |
| seq_puts(m, "0"); |
| } else |
| seq_puts(m, "0"); |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| return 0; |
| } |
| |
| static int i915_displayport_test_active_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, i915_displayport_test_active_show, |
| inode->i_private); |
| } |
| |
| static const struct file_operations i915_displayport_test_active_fops = { |
| .owner = THIS_MODULE, |
| .open = i915_displayport_test_active_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .write = i915_displayport_test_active_write |
| }; |
| |
| static int i915_displayport_test_data_show(struct seq_file *m, void *data) |
| { |
| struct drm_i915_private *dev_priv = m->private; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| struct intel_dp *intel_dp; |
| |
| drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| struct intel_encoder *encoder; |
| |
| if (connector->connector_type != |
| DRM_MODE_CONNECTOR_DisplayPort) |
| continue; |
| |
| encoder = to_intel_encoder(connector->encoder); |
| if (encoder && encoder->type == INTEL_OUTPUT_DP_MST) |
| continue; |
| |
| if (encoder && connector->status == connector_status_connected) { |
| intel_dp = enc_to_intel_dp(encoder); |
| if (intel_dp->compliance.test_type == |
| DP_TEST_LINK_EDID_READ) |
| seq_printf(m, "%lx", |
| intel_dp->compliance.test_data.edid); |
| else if (intel_dp->compliance.test_type == |
| DP_TEST_LINK_VIDEO_PATTERN) { |
| seq_printf(m, "hdisplay: %d\n", |
| intel_dp->compliance.test_data.hdisplay); |
| seq_printf(m, "vdisplay: %d\n", |
| intel_dp->compliance.test_data.vdisplay); |
| seq_printf(m, "bpc: %u\n", |
| intel_dp->compliance.test_data.bpc); |
| } else if (intel_dp->compliance.test_type == |
| DP_TEST_LINK_PHY_TEST_PATTERN) { |
| seq_printf(m, "pattern: %d\n", |
| intel_dp->compliance.test_data.phytest.phy_pattern); |
| seq_printf(m, "Number of lanes: %d\n", |
| intel_dp->compliance.test_data.phytest.num_lanes); |
| seq_printf(m, "Link Rate: %d\n", |
| intel_dp->compliance.test_data.phytest.link_rate); |
| seq_printf(m, "level: %02x\n", |
| intel_dp->train_set[0]); |
| } |
| } else |
| seq_puts(m, "0"); |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(i915_displayport_test_data); |
| |
| static int i915_displayport_test_type_show(struct seq_file *m, void *data) |
| { |
| struct drm_i915_private *dev_priv = m->private; |
| struct drm_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| struct intel_dp *intel_dp; |
| |
| drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| struct intel_encoder *encoder; |
| |
| if (connector->connector_type != |
| DRM_MODE_CONNECTOR_DisplayPort) |
| continue; |
| |
| encoder = to_intel_encoder(connector->encoder); |
| if (encoder && encoder->type == INTEL_OUTPUT_DP_MST) |
| continue; |
| |
| if (encoder && connector->status == connector_status_connected) { |
| intel_dp = enc_to_intel_dp(encoder); |
| seq_printf(m, "%02lx\n", intel_dp->compliance.test_type); |
| } else |
| seq_puts(m, "0"); |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(i915_displayport_test_type); |
| |
| static ssize_t |
| i915_fifo_underrun_reset_write(struct file *filp, |
| const char __user *ubuf, |
| size_t cnt, loff_t *ppos) |
| { |
| struct drm_i915_private *dev_priv = filp->private_data; |
| struct intel_crtc *crtc; |
| int ret; |
| bool reset; |
| |
| ret = kstrtobool_from_user(ubuf, cnt, &reset); |
| if (ret) |
| return ret; |
| |
| if (!reset) |
| return cnt; |
| |
| for_each_intel_crtc(&dev_priv->drm, crtc) { |
| struct drm_crtc_commit *commit; |
| struct intel_crtc_state *crtc_state; |
| |
| ret = drm_modeset_lock_single_interruptible(&crtc->base.mutex); |
| if (ret) |
| return ret; |
| |
| crtc_state = to_intel_crtc_state(crtc->base.state); |
| commit = crtc_state->uapi.commit; |
| if (commit) { |
| ret = wait_for_completion_interruptible(&commit->hw_done); |
| if (!ret) |
| ret = wait_for_completion_interruptible(&commit->flip_done); |
| } |
| |
| if (!ret && crtc_state->hw.active) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Re-arming FIFO underruns on pipe %c\n", |
| pipe_name(crtc->pipe)); |
| |
| intel_crtc_arm_fifo_underrun(crtc, crtc_state); |
| } |
| |
| drm_modeset_unlock(&crtc->base.mutex); |
| |
| if (ret) |
| return ret; |
| } |
| |
| intel_fbc_reset_underrun(dev_priv); |
| |
| return cnt; |
| } |
| |
| static const struct file_operations i915_fifo_underrun_reset_ops = { |
| .owner = THIS_MODULE, |
| .open = simple_open, |
| .write = i915_fifo_underrun_reset_write, |
| .llseek = default_llseek, |
| }; |
| |
| static const struct drm_info_list intel_display_debugfs_list[] = { |
| {"i915_frontbuffer_tracking", i915_frontbuffer_tracking, 0}, |
| {"i915_sr_status", i915_sr_status, 0}, |
| {"i915_gem_framebuffer", i915_gem_framebuffer_info, 0}, |
| {"i915_power_domain_info", i915_power_domain_info, 0}, |
| {"i915_display_info", i915_display_info, 0}, |
| {"i915_display_capabilities", i915_display_capabilities, 0}, |
| {"i915_shared_dplls_info", i915_shared_dplls_info, 0}, |
| {"i915_dp_mst_info", i915_dp_mst_info, 0}, |
| {"i915_ddb_info", i915_ddb_info, 0}, |
| {"i915_lpsp_status", i915_lpsp_status, 0}, |
| }; |
| |
| static const struct { |
| const char *name; |
| const struct file_operations *fops; |
| } intel_display_debugfs_files[] = { |
| {"i915_fifo_underrun_reset", &i915_fifo_underrun_reset_ops}, |
| {"i915_dp_test_data", &i915_displayport_test_data_fops}, |
| {"i915_dp_test_type", &i915_displayport_test_type_fops}, |
| {"i915_dp_test_active", &i915_displayport_test_active_fops}, |
| }; |
| |
| void intel_display_debugfs_register(struct drm_i915_private *i915) |
| { |
| struct drm_minor *minor = i915->drm.primary; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(intel_display_debugfs_files); i++) { |
| debugfs_create_file(intel_display_debugfs_files[i].name, |
| 0644, |
| minor->debugfs_root, |
| to_i915(minor->dev), |
| intel_display_debugfs_files[i].fops); |
| } |
| |
| drm_debugfs_create_files(intel_display_debugfs_list, |
| ARRAY_SIZE(intel_display_debugfs_list), |
| minor->debugfs_root, minor); |
| |
| intel_bios_debugfs_register(i915); |
| intel_cdclk_debugfs_register(i915); |
| intel_dmc_debugfs_register(i915); |
| intel_fbc_debugfs_register(i915); |
| intel_hpd_debugfs_register(i915); |
| intel_opregion_debugfs_register(i915); |
| intel_psr_debugfs_register(i915); |
| intel_wm_debugfs_register(i915); |
| intel_display_debugfs_params(i915); |
| } |
| |
| static int i915_hdcp_sink_capability_show(struct seq_file *m, void *data) |
| { |
| struct intel_connector *connector = m->private; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| int ret; |
| |
| ret = drm_modeset_lock_single_interruptible(&i915->drm.mode_config.connection_mutex); |
| if (ret) |
| return ret; |
| |
| if (!connector->base.encoder || |
| connector->base.status != connector_status_connected) { |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| seq_printf(m, "%s:%d HDCP version: ", connector->base.name, |
| connector->base.base.id); |
| intel_hdcp_info(m, connector, false); |
| |
| out: |
| drm_modeset_unlock(&i915->drm.mode_config.connection_mutex); |
| |
| return ret; |
| } |
| DEFINE_SHOW_ATTRIBUTE(i915_hdcp_sink_capability); |
| |
| static int i915_lpsp_capability_show(struct seq_file *m, void *data) |
| { |
| struct intel_connector *connector = m->private; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_encoder *encoder = intel_attached_encoder(connector); |
| int connector_type = connector->base.connector_type; |
| bool lpsp_capable = false; |
| |
| if (!encoder) |
| return -ENODEV; |
| |
| if (connector->base.status != connector_status_connected) |
| return -ENODEV; |
| |
| if (DISPLAY_VER(i915) >= 13) |
| lpsp_capable = encoder->port <= PORT_B; |
| else if (DISPLAY_VER(i915) >= 12) |
| /* |
| * Actually TGL can drive LPSP on port till DDI_C |
| * but there is no physical connected DDI_C on TGL sku's, |
| * even driver is not initilizing DDI_C port for gen12. |
| */ |
| lpsp_capable = encoder->port <= PORT_B; |
| else if (DISPLAY_VER(i915) == 11) |
| lpsp_capable = (connector_type == DRM_MODE_CONNECTOR_DSI || |
| connector_type == DRM_MODE_CONNECTOR_eDP); |
| else if (IS_DISPLAY_VER(i915, 9, 10)) |
| lpsp_capable = (encoder->port == PORT_A && |
| (connector_type == DRM_MODE_CONNECTOR_DSI || |
| connector_type == DRM_MODE_CONNECTOR_eDP || |
| connector_type == DRM_MODE_CONNECTOR_DisplayPort)); |
| else if (IS_HASWELL(i915) || IS_BROADWELL(i915)) |
| lpsp_capable = connector_type == DRM_MODE_CONNECTOR_eDP; |
| |
| seq_printf(m, "LPSP: %s\n", lpsp_capable ? "capable" : "incapable"); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(i915_lpsp_capability); |
| |
| static int i915_dsc_fec_support_show(struct seq_file *m, void *data) |
| { |
| struct intel_connector *connector = m->private; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct drm_crtc *crtc; |
| struct intel_dp *intel_dp; |
| struct drm_modeset_acquire_ctx ctx; |
| struct intel_crtc_state *crtc_state = NULL; |
| int ret = 0; |
| bool try_again = false; |
| |
| drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE); |
| |
| do { |
| try_again = false; |
| ret = drm_modeset_lock(&i915->drm.mode_config.connection_mutex, |
| &ctx); |
| if (ret) { |
| if (ret == -EDEADLK && !drm_modeset_backoff(&ctx)) { |
| try_again = true; |
| continue; |
| } |
| break; |
| } |
| crtc = connector->base.state->crtc; |
| if (connector->base.status != connector_status_connected || !crtc) { |
| ret = -ENODEV; |
| break; |
| } |
| ret = drm_modeset_lock(&crtc->mutex, &ctx); |
| if (ret == -EDEADLK) { |
| ret = drm_modeset_backoff(&ctx); |
| if (!ret) { |
| try_again = true; |
| continue; |
| } |
| break; |
| } else if (ret) { |
| break; |
| } |
| intel_dp = intel_attached_dp(connector); |
| crtc_state = to_intel_crtc_state(crtc->state); |
| seq_printf(m, "DSC_Enabled: %s\n", |
| str_yes_no(crtc_state->dsc.compression_enable)); |
| seq_printf(m, "DSC_Sink_Support: %s\n", |
| str_yes_no(drm_dp_sink_supports_dsc(connector->dp.dsc_dpcd))); |
| seq_printf(m, "DSC_Output_Format_Sink_Support: RGB: %s YCBCR420: %s YCBCR444: %s\n", |
| str_yes_no(drm_dp_dsc_sink_supports_format(connector->dp.dsc_dpcd, |
| DP_DSC_RGB)), |
| str_yes_no(drm_dp_dsc_sink_supports_format(connector->dp.dsc_dpcd, |
| DP_DSC_YCbCr420_Native)), |
| str_yes_no(drm_dp_dsc_sink_supports_format(connector->dp.dsc_dpcd, |
| DP_DSC_YCbCr444))); |
| seq_printf(m, "DSC_Sink_BPP_Precision: %d\n", |
| drm_dp_dsc_sink_bpp_incr(connector->dp.dsc_dpcd)); |
| seq_printf(m, "Force_DSC_Enable: %s\n", |
| str_yes_no(intel_dp->force_dsc_en)); |
| if (!intel_dp_is_edp(intel_dp)) |
| seq_printf(m, "FEC_Sink_Support: %s\n", |
| str_yes_no(drm_dp_sink_supports_fec(connector->dp.fec_capability))); |
| } while (try_again); |
| |
| drm_modeset_drop_locks(&ctx); |
| drm_modeset_acquire_fini(&ctx); |
| |
| return ret; |
| } |
| |
| static ssize_t i915_dsc_fec_support_write(struct file *file, |
| const char __user *ubuf, |
| size_t len, loff_t *offp) |
| { |
| struct seq_file *m = file->private_data; |
| struct intel_connector *connector = m->private; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_encoder *encoder = intel_attached_encoder(connector); |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| bool dsc_enable = false; |
| int ret; |
| |
| if (len == 0) |
| return 0; |
| |
| drm_dbg(&i915->drm, |
| "Copied %zu bytes from user to force DSC\n", len); |
| |
| ret = kstrtobool_from_user(ubuf, len, &dsc_enable); |
| if (ret < 0) |
| return ret; |
| |
| drm_dbg(&i915->drm, "Got %s for DSC Enable\n", |
| (dsc_enable) ? "true" : "false"); |
| intel_dp->force_dsc_en = dsc_enable; |
| |
| *offp += len; |
| return len; |
| } |
| |
| static int i915_dsc_fec_support_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, i915_dsc_fec_support_show, |
| inode->i_private); |
| } |
| |
| static const struct file_operations i915_dsc_fec_support_fops = { |
| .owner = THIS_MODULE, |
| .open = i915_dsc_fec_support_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .write = i915_dsc_fec_support_write |
| }; |
| |
| static int i915_dsc_bpc_show(struct seq_file *m, void *data) |
| { |
| struct intel_connector *connector = m->private; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_encoder *encoder = intel_attached_encoder(connector); |
| struct drm_crtc *crtc; |
| struct intel_crtc_state *crtc_state; |
| int ret; |
| |
| if (!encoder) |
| return -ENODEV; |
| |
| ret = drm_modeset_lock_single_interruptible(&i915->drm.mode_config.connection_mutex); |
| if (ret) |
| return ret; |
| |
| crtc = connector->base.state->crtc; |
| if (connector->base.status != connector_status_connected || !crtc) { |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| crtc_state = to_intel_crtc_state(crtc->state); |
| seq_printf(m, "Input_BPC: %d\n", crtc_state->dsc.config.bits_per_component); |
| |
| out: drm_modeset_unlock(&i915->drm.mode_config.connection_mutex); |
| |
| return ret; |
| } |
| |
| static ssize_t i915_dsc_bpc_write(struct file *file, |
| const char __user *ubuf, |
| size_t len, loff_t *offp) |
| { |
| struct seq_file *m = file->private_data; |
| struct intel_connector *connector = m->private; |
| struct intel_encoder *encoder = intel_attached_encoder(connector); |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| int dsc_bpc = 0; |
| int ret; |
| |
| ret = kstrtoint_from_user(ubuf, len, 0, &dsc_bpc); |
| if (ret < 0) |
| return ret; |
| |
| intel_dp->force_dsc_bpc = dsc_bpc; |
| *offp += len; |
| |
| return len; |
| } |
| |
| static int i915_dsc_bpc_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, i915_dsc_bpc_show, inode->i_private); |
| } |
| |
| static const struct file_operations i915_dsc_bpc_fops = { |
| .owner = THIS_MODULE, |
| .open = i915_dsc_bpc_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .write = i915_dsc_bpc_write |
| }; |
| |
| static int i915_dsc_output_format_show(struct seq_file *m, void *data) |
| { |
| struct intel_connector *connector = m->private; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_encoder *encoder = intel_attached_encoder(connector); |
| struct drm_crtc *crtc; |
| struct intel_crtc_state *crtc_state; |
| int ret; |
| |
| if (!encoder) |
| return -ENODEV; |
| |
| ret = drm_modeset_lock_single_interruptible(&i915->drm.mode_config.connection_mutex); |
| if (ret) |
| return ret; |
| |
| crtc = connector->base.state->crtc; |
| if (connector->base.status != connector_status_connected || !crtc) { |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| crtc_state = to_intel_crtc_state(crtc->state); |
| seq_printf(m, "DSC_Output_Format: %s\n", |
| intel_output_format_name(crtc_state->output_format)); |
| |
| out: drm_modeset_unlock(&i915->drm.mode_config.connection_mutex); |
| |
| return ret; |
| } |
| |
| static ssize_t i915_dsc_output_format_write(struct file *file, |
| const char __user *ubuf, |
| size_t len, loff_t *offp) |
| { |
| struct seq_file *m = file->private_data; |
| struct intel_connector *connector = m->private; |
| struct intel_encoder *encoder = intel_attached_encoder(connector); |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| int dsc_output_format = 0; |
| int ret; |
| |
| ret = kstrtoint_from_user(ubuf, len, 0, &dsc_output_format); |
| if (ret < 0) |
| return ret; |
| |
| intel_dp->force_dsc_output_format = dsc_output_format; |
| *offp += len; |
| |
| return len; |
| } |
| |
| static int i915_dsc_output_format_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, i915_dsc_output_format_show, inode->i_private); |
| } |
| |
| static const struct file_operations i915_dsc_output_format_fops = { |
| .owner = THIS_MODULE, |
| .open = i915_dsc_output_format_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .write = i915_dsc_output_format_write |
| }; |
| |
| static int i915_dsc_fractional_bpp_show(struct seq_file *m, void *data) |
| { |
| struct intel_connector *connector = m->private; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_encoder *encoder = intel_attached_encoder(connector); |
| struct drm_crtc *crtc; |
| struct intel_dp *intel_dp; |
| int ret; |
| |
| if (!encoder) |
| return -ENODEV; |
| |
| ret = drm_modeset_lock_single_interruptible(&i915->drm.mode_config.connection_mutex); |
| if (ret) |
| return ret; |
| |
| crtc = connector->base.state->crtc; |
| if (connector->base.status != connector_status_connected || !crtc) { |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| intel_dp = intel_attached_dp(connector); |
| seq_printf(m, "Force_DSC_Fractional_BPP_Enable: %s\n", |
| str_yes_no(intel_dp->force_dsc_fractional_bpp_en)); |
| |
| out: |
| drm_modeset_unlock(&i915->drm.mode_config.connection_mutex); |
| |
| return ret; |
| } |
| |
| static ssize_t i915_dsc_fractional_bpp_write(struct file *file, |
| const char __user *ubuf, |
| size_t len, loff_t *offp) |
| { |
| struct seq_file *m = file->private_data; |
| struct intel_connector *connector = m->private; |
| struct intel_encoder *encoder = intel_attached_encoder(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| bool dsc_fractional_bpp_enable = false; |
| int ret; |
| |
| if (len == 0) |
| return 0; |
| |
| drm_dbg(&i915->drm, |
| "Copied %zu bytes from user to force fractional bpp for DSC\n", len); |
| |
| ret = kstrtobool_from_user(ubuf, len, &dsc_fractional_bpp_enable); |
| if (ret < 0) |
| return ret; |
| |
| drm_dbg(&i915->drm, "Got %s for DSC Fractional BPP Enable\n", |
| (dsc_fractional_bpp_enable) ? "true" : "false"); |
| intel_dp->force_dsc_fractional_bpp_en = dsc_fractional_bpp_enable; |
| |
| *offp += len; |
| |
| return len; |
| } |
| |
| static int i915_dsc_fractional_bpp_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, i915_dsc_fractional_bpp_show, inode->i_private); |
| } |
| |
| static const struct file_operations i915_dsc_fractional_bpp_fops = { |
| .owner = THIS_MODULE, |
| .open = i915_dsc_fractional_bpp_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .write = i915_dsc_fractional_bpp_write |
| }; |
| |
| /* |
| * Returns the Current CRTC's bpc. |
| * Example usage: cat /sys/kernel/debug/dri/0/crtc-0/i915_current_bpc |
| */ |
| static int i915_current_bpc_show(struct seq_file *m, void *data) |
| { |
| struct intel_crtc *crtc = m->private; |
| struct intel_crtc_state *crtc_state; |
| int ret; |
| |
| ret = drm_modeset_lock_single_interruptible(&crtc->base.mutex); |
| if (ret) |
| return ret; |
| |
| crtc_state = to_intel_crtc_state(crtc->base.state); |
| seq_printf(m, "Current: %u\n", crtc_state->pipe_bpp / 3); |
| |
| drm_modeset_unlock(&crtc->base.mutex); |
| |
| return ret; |
| } |
| DEFINE_SHOW_ATTRIBUTE(i915_current_bpc); |
| |
| /* Pipe may differ from crtc index if pipes are fused off */ |
| static int intel_crtc_pipe_show(struct seq_file *m, void *unused) |
| { |
| struct intel_crtc *crtc = m->private; |
| |
| seq_printf(m, "%c\n", pipe_name(crtc->pipe)); |
| |
| return 0; |
| } |
| DEFINE_SHOW_ATTRIBUTE(intel_crtc_pipe); |
| |
| /** |
| * intel_connector_debugfs_add - add i915 specific connector debugfs files |
| * @connector: pointer to a registered intel_connector |
| * |
| * Cleanup will be done by drm_connector_unregister() through a call to |
| * drm_debugfs_connector_remove(). |
| */ |
| void intel_connector_debugfs_add(struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct dentry *root = connector->base.debugfs_entry; |
| int connector_type = connector->base.connector_type; |
| |
| /* The connector must have been registered beforehands. */ |
| if (!root) |
| return; |
| |
| intel_drrs_connector_debugfs_add(connector); |
| intel_pps_connector_debugfs_add(connector); |
| intel_psr_connector_debugfs_add(connector); |
| intel_alpm_lobf_debugfs_add(connector); |
| intel_dp_link_training_debugfs_add(connector); |
| |
| if (connector_type == DRM_MODE_CONNECTOR_DisplayPort || |
| connector_type == DRM_MODE_CONNECTOR_HDMIA || |
| connector_type == DRM_MODE_CONNECTOR_HDMIB) { |
| debugfs_create_file("i915_hdcp_sink_capability", 0444, root, |
| connector, &i915_hdcp_sink_capability_fops); |
| } |
| |
| if (DISPLAY_VER(i915) >= 11 && |
| ((connector_type == DRM_MODE_CONNECTOR_DisplayPort && !connector->mst_port) || |
| connector_type == DRM_MODE_CONNECTOR_eDP)) { |
| debugfs_create_file("i915_dsc_fec_support", 0644, root, |
| connector, &i915_dsc_fec_support_fops); |
| |
| debugfs_create_file("i915_dsc_bpc", 0644, root, |
| connector, &i915_dsc_bpc_fops); |
| |
| debugfs_create_file("i915_dsc_output_format", 0644, root, |
| connector, &i915_dsc_output_format_fops); |
| |
| debugfs_create_file("i915_dsc_fractional_bpp", 0644, root, |
| connector, &i915_dsc_fractional_bpp_fops); |
| } |
| |
| if (DISPLAY_VER(i915) >= 11 && |
| (connector_type == DRM_MODE_CONNECTOR_DisplayPort || |
| connector_type == DRM_MODE_CONNECTOR_eDP)) { |
| debugfs_create_bool("i915_bigjoiner_force_enable", 0644, root, |
| &connector->force_bigjoiner_enable); |
| } |
| |
| if (connector_type == DRM_MODE_CONNECTOR_DSI || |
| connector_type == DRM_MODE_CONNECTOR_eDP || |
| connector_type == DRM_MODE_CONNECTOR_DisplayPort || |
| connector_type == DRM_MODE_CONNECTOR_HDMIA || |
| connector_type == DRM_MODE_CONNECTOR_HDMIB) |
| debugfs_create_file("i915_lpsp_capability", 0444, root, |
| connector, &i915_lpsp_capability_fops); |
| } |
| |
| /** |
| * intel_crtc_debugfs_add - add i915 specific crtc debugfs files |
| * @crtc: pointer to a drm_crtc |
| * |
| * Failure to add debugfs entries should generally be ignored. |
| */ |
| void intel_crtc_debugfs_add(struct intel_crtc *crtc) |
| { |
| struct dentry *root = crtc->base.debugfs_entry; |
| |
| if (!root) |
| return; |
| |
| crtc_updates_add(crtc); |
| intel_drrs_crtc_debugfs_add(crtc); |
| intel_fbc_crtc_debugfs_add(crtc); |
| hsw_ips_crtc_debugfs_add(crtc); |
| |
| debugfs_create_file("i915_current_bpc", 0444, root, crtc, |
| &i915_current_bpc_fops); |
| debugfs_create_file("i915_pipe", 0444, root, crtc, |
| &intel_crtc_pipe_fops); |
| } |