arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright 2021-2022 TQ-Systems GmbH
  * Author: Alexander Stein <alexander.stein@tq-group.com>
  */

 #include "imx8mp.dtsi"

 / {
 	model = "TQ-Systems i.MX8MPlus TQMa8MPxL";
 	compatible = "tq,imx8mp-tqma8mpql", "fsl,imx8mp";

 	memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};

 	/* identical to buck4_reg, but should never change */
 	reg_vcc3v3: regulator-vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};

 	/* e-MMC IO, needed for HS modes */
 	reg_vcc1v8: regulator-vcc1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
 	};
 };

 &A53_0 {
 	cpu-supply = <&buck2_reg>;
 };

 &flexspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexspi0>;
 	status = "okay";

 	flash0: flash@0 {
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <80000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 	};
 };

 &i2c1 {
 	clock-frequency = <384000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";

 	se97: temperature-sensor@1b {
 		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};

 	pmic: pmic@25 {
 		reg = <0x25>;
 		compatible = "nxp,pca9450c";

 		/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
 		pinctrl-0 = <&pinctrl_pmic>;
 		pinctrl-names = "default";
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;

 		regulators {
 			/* V_0V85_SOC: 0.85 .. 0.95 */
 			buck1_reg: BUCK1 {
 				regulator-name = "BUCK1";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <950000>;
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
 			};

 			/* VDD_ARM */
 			buck2_reg: BUCK2 {
 				regulator-name = "BUCK2";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-boot-on;
 				regulator-always-on;
 				nxp,dvs-run-voltage = <950000>;
 				nxp,dvs-standby-voltage = <850000>;
 				regulator-ramp-delay = <3125>;
 			};

 			/* VCC3V3 -> VMMC, ... must not be changed */
 			buck4_reg: BUCK4 {
 				regulator-name = "BUCK4";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};

 			/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
 			buck5_reg: BUCK5 {
 				regulator-name = "BUCK5";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};

 			/* V_1V1 -> RAM, ... must not be changed */
 			buck6_reg: BUCK6 {
 				regulator-name = "BUCK6";
 				regulator-min-microvolt = <1100000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};

 			/* V_1V8_SNVS */
 			ldo1_reg: LDO1 {
 				regulator-name = "LDO1";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};

 			/* V_1V8_ANA */
 			ldo3_reg: LDO3 {
 				regulator-name = "LDO3";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};

 			/* unused */
 			ldo4_reg: LDO4 {
 				regulator-name = "LDO4";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
 			};

 			/* VCC SD IO - switched using SD2 VSELECT */
 			ldo5_reg: LDO5 {
 				regulator-name = "LDO5";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 			};
 		};
 	};

 	pcf85063: rtc@51 {
 		compatible = "nxp,pcf85063a";
 		reg = <0x51>;
 	};

 	at24c02: eeprom@53 {
 		compatible = "nxp,se97b", "atmel,24c02";
 		read-only;
 		reg = <0x53>;
 		pagesize = <16>;
 		vcc-supply = <&reg_vcc3v3>;
 	};

 	m24c64: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
 		vcc-supply = <&reg_vcc3v3>;
 	};
 };

 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	bus-width = <8>;
 	non-removable;
 	no-sd;
 	no-sdio;
 	vmmc-supply = <&reg_vcc3v3>;
 	vqmmc-supply = <&reg_vcc1v8>;
 	status = "okay";
 };

 &wdog1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog>;
 	fsl,ext-reset-output;
 	status = "okay";
 };

 &iomuxc {
 	pinctrl_flexspi0: flexspi0grp {
 		fsl,pins = <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK	0x142>,
 			   <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82>,
 			   <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82>,
 			   <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82>,
 			   <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82>,
 			   <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82>;
 	};

 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001e2>,
 			   <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001e2>;
 	};

 	pinctrl_i2c1_gpio: i2c1-gpiogrp {
 		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x400001e2>,
 			   <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x400001e2>;
 	};

 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x1c0>;
 	};

 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x10>;
 	};

 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
 			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
 			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
 			   <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x84>,
 			   <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x84>;
 	};

 	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
 			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
 			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
 			   <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x84>,
 			   <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x84>;
 	};

 	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
 			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
 			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4>,
 			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
 			   <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x84>,
 			   <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x84>;
 	};

 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x1c4>;
 	};
 };
	// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
	/*
	* Copyright 2021-2022 TQ-Systems GmbH
	* Author: Alexander Stein <alexander.stein@tq-group.com>
	*/

	#include "imx8mp.dtsi"

	/ {
	model = "TQ-Systems i.MX8MPlus TQMa8MPxL";
	compatible = "tq,imx8mp-tqma8mpql", "fsl,imx8mp";

	memory@40000000 {
	device_type = "memory";
	reg = <0x0 0x40000000 0 0x80000000>;
	};

	/* identical to buck4_reg, but should never change */
	reg_vcc3v3: regulator-vcc3v3 {
	compatible = "regulator-fixed";
	regulator-name = "VCC3V3";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-always-on;
	};

	/* e-MMC IO, needed for HS modes */
	reg_vcc1v8: regulator-vcc1v8 {
	compatible = "regulator-fixed";
	regulator-name = "VCC1V8";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	};
	};

	&A53_0 {
	cpu-supply = <&buck2_reg>;
	};

	&flexspi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexspi0>;
	status = "okay";

	flash0: flash@0 {
	reg = <0>;
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	spi-max-frequency = <80000000>;
	spi-tx-bus-width = <1>;
	spi-rx-bus-width = <4>;
	};
	};

	&i2c1 {
	clock-frequency = <384000>;
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_i2c1>;
	pinctrl-1 = <&pinctrl_i2c1_gpio>;
	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH \| GPIO_OPEN_DRAIN)>;
	status = "okay";

	se97: temperature-sensor@1b {
	compatible = "nxp,se97b", "jedec,jc-42.4-temp";
	reg = <0x1b>;
	};

	pmic: pmic@25 {
	reg = <0x25>;
	compatible = "nxp,pca9450c";

	/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
	pinctrl-0 = <&pinctrl_pmic>;
	pinctrl-names = "default";
	interrupt-parent = <&gpio1>;
	interrupts = <8 IRQ_TYPE_LEVEL_LOW>;

	regulators {
	/* V_0V85_SOC: 0.85 .. 0.95 */
	buck1_reg: BUCK1 {
	regulator-name = "BUCK1";
	regulator-min-microvolt = <850000>;
	regulator-max-microvolt = <950000>;
	regulator-boot-on;
	regulator-always-on;
	regulator-ramp-delay = <3125>;
	};

	/* VDD_ARM */
	buck2_reg: BUCK2 {
	regulator-name = "BUCK2";
	regulator-min-microvolt = <850000>;
	regulator-max-microvolt = <1000000>;
	regulator-boot-on;
	regulator-always-on;
	nxp,dvs-run-voltage = <950000>;
	nxp,dvs-standby-voltage = <850000>;
	regulator-ramp-delay = <3125>;
	};

	/* VCC3V3 -> VMMC, ... must not be changed */
	buck4_reg: BUCK4 {
	regulator-name = "BUCK4";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-boot-on;
	regulator-always-on;
	};

	/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
	buck5_reg: BUCK5 {
	regulator-name = "BUCK5";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-boot-on;
	regulator-always-on;
	};

	/* V_1V1 -> RAM, ... must not be changed */
	buck6_reg: BUCK6 {
	regulator-name = "BUCK6";
	regulator-min-microvolt = <1100000>;
	regulator-max-microvolt = <1100000>;
	regulator-boot-on;
	regulator-always-on;
	};

	/* V_1V8_SNVS */
	ldo1_reg: LDO1 {
	regulator-name = "LDO1";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-boot-on;
	regulator-always-on;
	};

	/* V_1V8_ANA */
	ldo3_reg: LDO3 {
	regulator-name = "LDO3";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-boot-on;
	regulator-always-on;
	};

	/* unused */
	ldo4_reg: LDO4 {
	regulator-name = "LDO4";
	regulator-min-microvolt = <800000>;
	regulator-max-microvolt = <3300000>;
	};

	/* VCC SD IO - switched using SD2 VSELECT */
	ldo5_reg: LDO5 {
	regulator-name = "LDO5";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <3300000>;
	};
	};
	};

	pcf85063: rtc@51 {
	compatible = "nxp,pcf85063a";
	reg = <0x51>;
	};

	at24c02: eeprom@53 {
	compatible = "nxp,se97b", "atmel,24c02";
	read-only;
	reg = <0x53>;
	pagesize = <16>;
	vcc-supply = <&reg_vcc3v3>;
	};

	m24c64: eeprom@57 {
	compatible = "atmel,24c64";
	reg = <0x57>;
	pagesize = <32>;
	vcc-supply = <&reg_vcc3v3>;
	};
	};

	&usdhc3 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc3>;
	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
	bus-width = <8>;
	non-removable;
	no-sd;
	no-sdio;
	vmmc-supply = <&reg_vcc3v3>;
	vqmmc-supply = <&reg_vcc1v8>;
	status = "okay";
	};

	&wdog1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_wdog>;
	fsl,ext-reset-output;
	status = "okay";
	};

	&iomuxc {
	pinctrl_flexspi0: flexspi0grp {
	fsl,pins = <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x142>,
	<MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82>,
	<MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82>,
	<MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82>,
	<MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82>,
	<MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82>;
	};

	pinctrl_i2c1: i2c1grp {
	fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001e2>,
	<MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001e2>;
	};

	pinctrl_i2c1_gpio: i2c1-gpiogrp {
	fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001e2>,
	<MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001e2>;
	};

	pinctrl_pmic: pmicirqgrp {
	fsl,pins = <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x1c0>;
	};

	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
	fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x10>;
	};

	pinctrl_usdhc3: usdhc3grp {
	fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>,
	<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>,
	<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>,
	<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>,
	<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>,
	<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>,
	<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>,
	<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>,
	<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>,
	<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>,
	<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>,
	<MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>;
	};

	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
	fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>,
	<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>,
	<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>,
	<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>,
	<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>,
	<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>,
	<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>,
	<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>,
	<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>,
	<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>,
	<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>,
	<MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>;
	};

	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
	fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>,
	<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>,
	<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>,
	<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>,
	<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>,
	<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>,
	<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>,
	<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>,
	<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>,
	<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>,
	<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>,
	<MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>;
	};

	pinctrl_wdog: wdoggrp {
	fsl,pins = <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x1c4>;
	};
	};