| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2023 Loongson Technology Corporation Limited |
| */ |
| |
| #include <linux/delay.h> |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_debugfs.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_probe_helper.h> |
| |
| #include "lsdc_drv.h" |
| #include "lsdc_output.h" |
| |
| /* |
| * The display controller in LS7A2000 has two display pipes |
| * Display pipe 0 is attached with a built-in transparent VGA encoder and |
| * a built-in HDMI encoder. |
| * Display pipe 1 has only one built-in HDMI encoder connected. |
| * ______________________ _____________ |
| * | +-----+ | | | |
| * | CRTC0 -+--> | VGA | ----> VGA Connector ---> | VGA Monitor |<---+ |
| * | | +-----+ | |_____________| | |
| * | | | ______________ | |
| * | | +------+ | | | | |
| * | +--> | HDMI | ----> HDMI Connector --> | HDMI Monitor |<--+ |
| * | +------+ | |______________| | |
| * | +------+ | | |
| * | | i2c6 | <-------------------------------------------+ |
| * | +------+ | |
| * | | |
| * | DC in LS7A2000 | |
| * | | |
| * | +------+ | |
| * | | i2c7 | <--------------------------------+ |
| * | +------+ | | |
| * | | ______|_______ |
| * | +------+ | | | |
| * | CRTC1 ---> | HDMI | ----> HDMI Connector ---> | HDMI Monitor | |
| * | +------+ | |______________| |
| * |______________________| |
| */ |
| |
| static int ls7a2000_connector_get_modes(struct drm_connector *connector) |
| { |
| unsigned int num = 0; |
| struct edid *edid; |
| |
| if (connector->ddc) { |
| edid = drm_get_edid(connector, connector->ddc); |
| if (edid) { |
| drm_connector_update_edid_property(connector, edid); |
| num = drm_add_edid_modes(connector, edid); |
| kfree(edid); |
| } |
| |
| return num; |
| } |
| |
| num = drm_add_modes_noedid(connector, 1920, 1200); |
| |
| drm_set_preferred_mode(connector, 1024, 768); |
| |
| return num; |
| } |
| |
| static struct drm_encoder * |
| ls7a2000_connector_get_best_encoder(struct drm_connector *connector, |
| struct drm_atomic_state *state) |
| { |
| struct lsdc_output *output = connector_to_lsdc_output(connector); |
| |
| return &output->encoder; |
| } |
| |
| static const struct drm_connector_helper_funcs ls7a2000_connector_helpers = { |
| .atomic_best_encoder = ls7a2000_connector_get_best_encoder, |
| .get_modes = ls7a2000_connector_get_modes, |
| }; |
| |
| /* debugfs */ |
| |
| #define LSDC_HDMI_REG(i, reg) { \ |
| .name = __stringify_1(LSDC_HDMI##i##_##reg##_REG), \ |
| .offset = LSDC_HDMI##i##_##reg##_REG, \ |
| } |
| |
| static const struct lsdc_reg32 ls7a2000_hdmi0_encoder_regs[] = { |
| LSDC_HDMI_REG(0, ZONE), |
| LSDC_HDMI_REG(0, INTF_CTRL), |
| LSDC_HDMI_REG(0, PHY_CTRL), |
| LSDC_HDMI_REG(0, PHY_PLL), |
| LSDC_HDMI_REG(0, AVI_INFO_CRTL), |
| LSDC_HDMI_REG(0, PHY_CAL), |
| LSDC_HDMI_REG(0, AUDIO_PLL_LO), |
| LSDC_HDMI_REG(0, AUDIO_PLL_HI), |
| {NULL, 0}, /* MUST be {NULL, 0} terminated */ |
| }; |
| |
| static const struct lsdc_reg32 ls7a2000_hdmi1_encoder_regs[] = { |
| LSDC_HDMI_REG(1, ZONE), |
| LSDC_HDMI_REG(1, INTF_CTRL), |
| LSDC_HDMI_REG(1, PHY_CTRL), |
| LSDC_HDMI_REG(1, PHY_PLL), |
| LSDC_HDMI_REG(1, AVI_INFO_CRTL), |
| LSDC_HDMI_REG(1, PHY_CAL), |
| LSDC_HDMI_REG(1, AUDIO_PLL_LO), |
| LSDC_HDMI_REG(1, AUDIO_PLL_HI), |
| {NULL, 0}, /* MUST be {NULL, 0} terminated */ |
| }; |
| |
| static int ls7a2000_hdmi_encoder_regs_show(struct seq_file *m, void *data) |
| { |
| struct drm_info_node *node = (struct drm_info_node *)m->private; |
| struct drm_device *ddev = node->minor->dev; |
| struct lsdc_device *ldev = to_lsdc(ddev); |
| const struct lsdc_reg32 *preg; |
| |
| preg = (const struct lsdc_reg32 *)node->info_ent->data; |
| |
| while (preg->name) { |
| u32 offset = preg->offset; |
| |
| seq_printf(m, "%s (0x%04x): 0x%08x\n", |
| preg->name, offset, lsdc_rreg32(ldev, offset)); |
| ++preg; |
| } |
| |
| return 0; |
| } |
| |
| static const struct drm_info_list ls7a2000_hdmi0_debugfs_files[] = { |
| { "regs", ls7a2000_hdmi_encoder_regs_show, 0, (void *)ls7a2000_hdmi0_encoder_regs }, |
| }; |
| |
| static const struct drm_info_list ls7a2000_hdmi1_debugfs_files[] = { |
| { "regs", ls7a2000_hdmi_encoder_regs_show, 0, (void *)ls7a2000_hdmi1_encoder_regs }, |
| }; |
| |
| static void ls7a2000_hdmi0_late_register(struct drm_connector *connector, |
| struct dentry *root) |
| { |
| struct drm_device *ddev = connector->dev; |
| struct drm_minor *minor = ddev->primary; |
| |
| drm_debugfs_create_files(ls7a2000_hdmi0_debugfs_files, |
| ARRAY_SIZE(ls7a2000_hdmi0_debugfs_files), |
| root, minor); |
| } |
| |
| static void ls7a2000_hdmi1_late_register(struct drm_connector *connector, |
| struct dentry *root) |
| { |
| struct drm_device *ddev = connector->dev; |
| struct drm_minor *minor = ddev->primary; |
| |
| drm_debugfs_create_files(ls7a2000_hdmi1_debugfs_files, |
| ARRAY_SIZE(ls7a2000_hdmi1_debugfs_files), |
| root, minor); |
| } |
| |
| /* monitor present detection */ |
| |
| static enum drm_connector_status |
| ls7a2000_hdmi0_vga_connector_detect(struct drm_connector *connector, bool force) |
| { |
| struct drm_device *ddev = connector->dev; |
| struct lsdc_device *ldev = to_lsdc(ddev); |
| u32 val; |
| |
| val = lsdc_rreg32(ldev, LSDC_HDMI_HPD_STATUS_REG); |
| |
| if (val & HDMI0_HPD_FLAG) |
| return connector_status_connected; |
| |
| if (connector->ddc) { |
| if (drm_probe_ddc(connector->ddc)) |
| return connector_status_connected; |
| |
| return connector_status_disconnected; |
| } |
| |
| return connector_status_unknown; |
| } |
| |
| static enum drm_connector_status |
| ls7a2000_hdmi1_connector_detect(struct drm_connector *connector, bool force) |
| { |
| struct lsdc_device *ldev = to_lsdc(connector->dev); |
| u32 val; |
| |
| val = lsdc_rreg32(ldev, LSDC_HDMI_HPD_STATUS_REG); |
| |
| if (val & HDMI1_HPD_FLAG) |
| return connector_status_connected; |
| |
| return connector_status_disconnected; |
| } |
| |
| static const struct drm_connector_funcs ls7a2000_hdmi_connector_funcs[2] = { |
| { |
| .detect = ls7a2000_hdmi0_vga_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = drm_connector_cleanup, |
| .reset = drm_atomic_helper_connector_reset, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| .debugfs_init = ls7a2000_hdmi0_late_register, |
| }, |
| { |
| .detect = ls7a2000_hdmi1_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = drm_connector_cleanup, |
| .reset = drm_atomic_helper_connector_reset, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| .debugfs_init = ls7a2000_hdmi1_late_register, |
| }, |
| }; |
| |
| /* Even though some board has only one hdmi on display pipe 1, |
| * We still need hook lsdc_encoder_funcs up on display pipe 0, |
| * This is because we need its reset() callback get called, to |
| * set the LSDC_HDMIx_CTRL_REG using software gpio emulated i2c. |
| * Otherwise, the firmware may set LSDC_HDMIx_CTRL_REG blindly. |
| */ |
| static void ls7a2000_hdmi0_encoder_reset(struct drm_encoder *encoder) |
| { |
| struct drm_device *ddev = encoder->dev; |
| struct lsdc_device *ldev = to_lsdc(ddev); |
| u32 val; |
| |
| val = PHY_CLOCK_POL | PHY_CLOCK_EN | PHY_DATA_EN; |
| lsdc_wreg32(ldev, LSDC_CRTC0_DVO_CONF_REG, val); |
| |
| /* using software gpio emulated i2c */ |
| val = lsdc_rreg32(ldev, LSDC_HDMI0_INTF_CTRL_REG); |
| val &= ~HW_I2C_EN; |
| lsdc_wreg32(ldev, LSDC_HDMI0_INTF_CTRL_REG, val); |
| |
| /* help the hdmi phy to get out of reset state */ |
| lsdc_wreg32(ldev, LSDC_HDMI0_PHY_CTRL_REG, HDMI_PHY_RESET_N); |
| |
| mdelay(20); |
| |
| drm_dbg(ddev, "HDMI-0 Reset\n"); |
| } |
| |
| static void ls7a2000_hdmi1_encoder_reset(struct drm_encoder *encoder) |
| { |
| struct drm_device *ddev = encoder->dev; |
| struct lsdc_device *ldev = to_lsdc(ddev); |
| u32 val; |
| |
| val = PHY_CLOCK_POL | PHY_CLOCK_EN | PHY_DATA_EN; |
| lsdc_wreg32(ldev, LSDC_CRTC1_DVO_CONF_REG, val); |
| |
| /* using software gpio emulated i2c */ |
| val = lsdc_rreg32(ldev, LSDC_HDMI1_INTF_CTRL_REG); |
| val &= ~HW_I2C_EN; |
| lsdc_wreg32(ldev, LSDC_HDMI1_INTF_CTRL_REG, val); |
| |
| /* help the hdmi phy to get out of reset state */ |
| lsdc_wreg32(ldev, LSDC_HDMI1_PHY_CTRL_REG, HDMI_PHY_RESET_N); |
| |
| mdelay(20); |
| |
| drm_dbg(ddev, "HDMI-1 Reset\n"); |
| } |
| |
| static const struct drm_encoder_funcs ls7a2000_encoder_funcs[2] = { |
| { |
| .reset = ls7a2000_hdmi0_encoder_reset, |
| .destroy = drm_encoder_cleanup, |
| }, |
| { |
| .reset = ls7a2000_hdmi1_encoder_reset, |
| .destroy = drm_encoder_cleanup, |
| }, |
| }; |
| |
| static int ls7a2000_hdmi_set_avi_infoframe(struct drm_encoder *encoder, |
| struct drm_display_mode *mode) |
| { |
| struct lsdc_output *output = encoder_to_lsdc_output(encoder); |
| struct lsdc_display_pipe *dispipe = output_to_display_pipe(output); |
| unsigned int index = dispipe->index; |
| struct drm_device *ddev = encoder->dev; |
| struct lsdc_device *ldev = to_lsdc(ddev); |
| struct hdmi_avi_infoframe infoframe; |
| u8 buffer[HDMI_INFOFRAME_SIZE(AVI)]; |
| unsigned char *ptr = &buffer[HDMI_INFOFRAME_HEADER_SIZE]; |
| unsigned int content0, content1, content2, content3; |
| int err; |
| |
| err = drm_hdmi_avi_infoframe_from_display_mode(&infoframe, |
| &output->connector, |
| mode); |
| if (err < 0) { |
| drm_err(ddev, "failed to setup AVI infoframe: %d\n", err); |
| return err; |
| } |
| |
| /* Fixed infoframe configuration not linked to the mode */ |
| infoframe.colorspace = HDMI_COLORSPACE_RGB; |
| infoframe.quantization_range = HDMI_QUANTIZATION_RANGE_DEFAULT; |
| infoframe.colorimetry = HDMI_COLORIMETRY_NONE; |
| |
| err = hdmi_avi_infoframe_pack(&infoframe, buffer, sizeof(buffer)); |
| if (err < 0) { |
| drm_err(ddev, "failed to pack AVI infoframe: %d\n", err); |
| return err; |
| } |
| |
| content0 = *(unsigned int *)ptr; |
| content1 = *(ptr + 4); |
| content2 = *(unsigned int *)(ptr + 5); |
| content3 = *(unsigned int *)(ptr + 9); |
| |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_AVI_CONTENT0, index, content0); |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_AVI_CONTENT1, index, content1); |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_AVI_CONTENT2, index, content2); |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_AVI_CONTENT3, index, content3); |
| |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_AVI_INFO_CRTL_REG, index, |
| AVI_PKT_ENABLE | AVI_PKT_UPDATE); |
| |
| drm_dbg(ddev, "Update HDMI-%u avi infoframe\n", index); |
| |
| return 0; |
| } |
| |
| static void ls7a2000_hdmi_atomic_disable(struct drm_encoder *encoder, |
| struct drm_atomic_state *state) |
| { |
| struct lsdc_output *output = encoder_to_lsdc_output(encoder); |
| struct lsdc_display_pipe *dispipe = output_to_display_pipe(output); |
| unsigned int index = dispipe->index; |
| struct drm_device *ddev = encoder->dev; |
| struct lsdc_device *ldev = to_lsdc(ddev); |
| u32 val; |
| |
| /* Disable the hdmi phy */ |
| val = lsdc_pipe_rreg32(ldev, LSDC_HDMI0_PHY_CTRL_REG, index); |
| val &= ~HDMI_PHY_EN; |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_PHY_CTRL_REG, index, val); |
| |
| /* Disable the hdmi interface */ |
| val = lsdc_pipe_rreg32(ldev, LSDC_HDMI0_INTF_CTRL_REG, index); |
| val &= ~HDMI_INTERFACE_EN; |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_INTF_CTRL_REG, index, val); |
| |
| drm_dbg(ddev, "HDMI-%u disabled\n", index); |
| } |
| |
| static void ls7a2000_hdmi_atomic_enable(struct drm_encoder *encoder, |
| struct drm_atomic_state *state) |
| { |
| struct drm_device *ddev = encoder->dev; |
| struct lsdc_device *ldev = to_lsdc(ddev); |
| struct lsdc_output *output = encoder_to_lsdc_output(encoder); |
| struct lsdc_display_pipe *dispipe = output_to_display_pipe(output); |
| unsigned int index = dispipe->index; |
| u32 val; |
| |
| /* datasheet say it should larger than 48 */ |
| val = 64 << HDMI_H_ZONE_IDLE_SHIFT | 64 << HDMI_V_ZONE_IDLE_SHIFT; |
| |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_ZONE_REG, index, val); |
| |
| val = HDMI_PHY_TERM_STATUS | |
| HDMI_PHY_TERM_DET_EN | |
| HDMI_PHY_TERM_H_EN | |
| HDMI_PHY_TERM_L_EN | |
| HDMI_PHY_RESET_N | |
| HDMI_PHY_EN; |
| |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_PHY_CTRL_REG, index, val); |
| |
| udelay(2); |
| |
| val = HDMI_CTL_PERIOD_MODE | |
| HDMI_AUDIO_EN | |
| HDMI_PACKET_EN | |
| HDMI_INTERFACE_EN | |
| (8 << HDMI_VIDEO_PREAMBLE_SHIFT); |
| |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_INTF_CTRL_REG, index, val); |
| |
| drm_dbg(ddev, "HDMI-%u enabled\n", index); |
| } |
| |
| /* |
| * Fout = M * Fin |
| * |
| * M = (4 * LF) / (IDF * ODF) |
| * |
| * IDF: Input Division Factor |
| * ODF: Output Division Factor |
| * LF: Loop Factor |
| * M: Required Mult |
| * |
| * +--------------------------------------------------------+ |
| * | Fin (kHZ) | M | IDF | LF | ODF | Fout(Mhz) | |
| * |-------------------+----+-----+----+-----+--------------| |
| * | 170000 ~ 340000 | 10 | 16 | 40 | 1 | 1700 ~ 3400 | |
| * | 85000 ~ 170000 | 10 | 8 | 40 | 2 | 850 ~ 1700 | |
| * | 42500 ~ 85000 | 10 | 4 | 40 | 4 | 425 ~ 850 | |
| * | 21250 ~ 42500 | 10 | 2 | 40 | 8 | 212.5 ~ 425 | |
| * | 20000 ~ 21250 | 10 | 1 | 40 | 16 | 200 ~ 212.5 | |
| * +--------------------------------------------------------+ |
| */ |
| static void ls7a2000_hdmi_phy_pll_config(struct lsdc_device *ldev, |
| int fin, |
| unsigned int index) |
| { |
| struct drm_device *ddev = &ldev->base; |
| int count = 0; |
| u32 val; |
| |
| /* Firstly, disable phy pll */ |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_PHY_PLL_REG, index, 0x0); |
| |
| /* |
| * Most of time, loongson HDMI require M = 10 |
| * for example, 10 = (4 * 40) / (8 * 2) |
| * here, write "1" to the ODF will get "2" |
| */ |
| |
| if (fin >= 170000) |
| val = (16 << HDMI_PLL_IDF_SHIFT) | |
| (40 << HDMI_PLL_LF_SHIFT) | |
| (0 << HDMI_PLL_ODF_SHIFT); |
| else if (fin >= 85000) |
| val = (8 << HDMI_PLL_IDF_SHIFT) | |
| (40 << HDMI_PLL_LF_SHIFT) | |
| (1 << HDMI_PLL_ODF_SHIFT); |
| else if (fin >= 42500) |
| val = (4 << HDMI_PLL_IDF_SHIFT) | |
| (40 << HDMI_PLL_LF_SHIFT) | |
| (2 << HDMI_PLL_ODF_SHIFT); |
| else if (fin >= 21250) |
| val = (2 << HDMI_PLL_IDF_SHIFT) | |
| (40 << HDMI_PLL_LF_SHIFT) | |
| (3 << HDMI_PLL_ODF_SHIFT); |
| else |
| val = (1 << HDMI_PLL_IDF_SHIFT) | |
| (40 << HDMI_PLL_LF_SHIFT) | |
| (4 << HDMI_PLL_ODF_SHIFT); |
| |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_PHY_PLL_REG, index, val); |
| |
| val |= HDMI_PLL_ENABLE; |
| |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_PHY_PLL_REG, index, val); |
| |
| udelay(2); |
| |
| drm_dbg(ddev, "Fin of HDMI-%u: %d kHz\n", index, fin); |
| |
| /* Wait hdmi phy pll lock */ |
| do { |
| val = lsdc_pipe_rreg32(ldev, LSDC_HDMI0_PHY_PLL_REG, index); |
| |
| if (val & HDMI_PLL_LOCKED) { |
| drm_dbg(ddev, "Setting HDMI-%u PLL take %d cycles\n", |
| index, count); |
| break; |
| } |
| ++count; |
| } while (count < 1000); |
| |
| lsdc_pipe_wreg32(ldev, LSDC_HDMI0_PHY_CAL_REG, index, 0x0f000ff0); |
| |
| if (count >= 1000) |
| drm_err(ddev, "Setting HDMI-%u PLL failed\n", index); |
| } |
| |
| static void ls7a2000_hdmi_atomic_mode_set(struct drm_encoder *encoder, |
| struct drm_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct lsdc_output *output = encoder_to_lsdc_output(encoder); |
| struct lsdc_display_pipe *dispipe = output_to_display_pipe(output); |
| unsigned int index = dispipe->index; |
| struct drm_device *ddev = encoder->dev; |
| struct lsdc_device *ldev = to_lsdc(ddev); |
| struct drm_display_mode *mode = &crtc_state->mode; |
| |
| ls7a2000_hdmi_phy_pll_config(ldev, mode->clock, index); |
| |
| ls7a2000_hdmi_set_avi_infoframe(encoder, mode); |
| |
| drm_dbg(ddev, "%s modeset finished\n", encoder->name); |
| } |
| |
| static const struct drm_encoder_helper_funcs ls7a2000_encoder_helper_funcs = { |
| .atomic_disable = ls7a2000_hdmi_atomic_disable, |
| .atomic_enable = ls7a2000_hdmi_atomic_enable, |
| .atomic_mode_set = ls7a2000_hdmi_atomic_mode_set, |
| }; |
| |
| /* |
| * For LS7A2000: |
| * |
| * 1) Most of board export one vga + hdmi output interface. |
| * 2) Yet, Some boards export double hdmi output interface. |
| * 3) Still have boards export three output(2 hdmi + 1 vga). |
| * |
| * So let's hook hdmi helper funcs to all display pipe, don't miss. |
| * writing hdmi register do no harms. |
| */ |
| int ls7a2000_output_init(struct drm_device *ddev, |
| struct lsdc_display_pipe *dispipe, |
| struct i2c_adapter *ddc, |
| unsigned int pipe) |
| { |
| struct lsdc_output *output = &dispipe->output; |
| struct drm_encoder *encoder = &output->encoder; |
| struct drm_connector *connector = &output->connector; |
| int ret; |
| |
| ret = drm_encoder_init(ddev, encoder, &ls7a2000_encoder_funcs[pipe], |
| DRM_MODE_ENCODER_TMDS, "encoder-%u", pipe); |
| if (ret) |
| return ret; |
| |
| encoder->possible_crtcs = BIT(pipe); |
| |
| drm_encoder_helper_add(encoder, &ls7a2000_encoder_helper_funcs); |
| |
| ret = drm_connector_init_with_ddc(ddev, connector, |
| &ls7a2000_hdmi_connector_funcs[pipe], |
| DRM_MODE_CONNECTOR_HDMIA, ddc); |
| if (ret) |
| return ret; |
| |
| drm_info(ddev, "display pipe-%u has HDMI %s\n", pipe, pipe ? "" : "and/or VGA"); |
| |
| drm_connector_helper_add(connector, &ls7a2000_connector_helpers); |
| |
| drm_connector_attach_encoder(connector, encoder); |
| |
| connector->polled = DRM_CONNECTOR_POLL_CONNECT | |
| DRM_CONNECTOR_POLL_DISCONNECT; |
| |
| connector->interlace_allowed = 0; |
| connector->doublescan_allowed = 0; |
| |
| return 0; |
| } |