|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Copyright (C) 2015 Broadcom Corporation | 
|  | * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de> | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/phy/phy.h> | 
|  | #include <linux/bcma/bcma.h> | 
|  | #include <linux/ioport.h> | 
|  |  | 
|  | #include "pcie-iproc.h" | 
|  |  | 
|  |  | 
|  | /* NS: CLASS field is R/O, and set to wrong 0x200 value */ | 
|  | static void bcma_pcie2_fixup_class(struct pci_dev *dev) | 
|  | { | 
|  | dev->class = PCI_CLASS_BRIDGE_PCI << 8; | 
|  | } | 
|  | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x8011, bcma_pcie2_fixup_class); | 
|  | DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x8012, bcma_pcie2_fixup_class); | 
|  |  | 
|  | static int iproc_pcie_bcma_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) | 
|  | { | 
|  | struct iproc_pcie *pcie = dev->sysdata; | 
|  | struct bcma_device *bdev = container_of(pcie->dev, struct bcma_device, dev); | 
|  |  | 
|  | return bcma_core_irq(bdev, 5); | 
|  | } | 
|  |  | 
|  | static int iproc_pcie_bcma_probe(struct bcma_device *bdev) | 
|  | { | 
|  | struct device *dev = &bdev->dev; | 
|  | struct iproc_pcie *pcie; | 
|  | LIST_HEAD(resources); | 
|  | struct pci_host_bridge *bridge; | 
|  | int ret; | 
|  |  | 
|  | bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie)); | 
|  | if (!bridge) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pcie = pci_host_bridge_priv(bridge); | 
|  |  | 
|  | pcie->dev = dev; | 
|  |  | 
|  | pcie->type = IPROC_PCIE_PAXB_BCMA; | 
|  | pcie->base = bdev->io_addr; | 
|  | if (!pcie->base) { | 
|  | dev_err(dev, "no controller registers\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | pcie->base_addr = bdev->addr; | 
|  |  | 
|  | pcie->mem.start = bdev->addr_s[0]; | 
|  | pcie->mem.end = bdev->addr_s[0] + SZ_128M - 1; | 
|  | pcie->mem.name = "PCIe MEM space"; | 
|  | pcie->mem.flags = IORESOURCE_MEM; | 
|  | pci_add_resource(&resources, &pcie->mem); | 
|  |  | 
|  | pcie->map_irq = iproc_pcie_bcma_map_irq; | 
|  |  | 
|  | ret = iproc_pcie_setup(pcie, &resources); | 
|  | if (ret) { | 
|  | dev_err(dev, "PCIe controller setup failed\n"); | 
|  | pci_free_resource_list(&resources); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | bcma_set_drvdata(bdev, pcie); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void iproc_pcie_bcma_remove(struct bcma_device *bdev) | 
|  | { | 
|  | struct iproc_pcie *pcie = bcma_get_drvdata(bdev); | 
|  |  | 
|  | iproc_pcie_remove(pcie); | 
|  | } | 
|  |  | 
|  | static const struct bcma_device_id iproc_pcie_bcma_table[] = { | 
|  | BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_PCIEG2, BCMA_ANY_REV, BCMA_ANY_CLASS), | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(bcma, iproc_pcie_bcma_table); | 
|  |  | 
|  | static struct bcma_driver iproc_pcie_bcma_driver = { | 
|  | .name		= KBUILD_MODNAME, | 
|  | .id_table	= iproc_pcie_bcma_table, | 
|  | .probe		= iproc_pcie_bcma_probe, | 
|  | .remove		= iproc_pcie_bcma_remove, | 
|  | }; | 
|  |  | 
|  | static int __init iproc_pcie_bcma_init(void) | 
|  | { | 
|  | return bcma_driver_register(&iproc_pcie_bcma_driver); | 
|  | } | 
|  | module_init(iproc_pcie_bcma_init); | 
|  |  | 
|  | static void __exit iproc_pcie_bcma_exit(void) | 
|  | { | 
|  | bcma_driver_unregister(&iproc_pcie_bcma_driver); | 
|  | } | 
|  | module_exit(iproc_pcie_bcma_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Hauke Mehrtens"); | 
|  | MODULE_DESCRIPTION("Broadcom iProc PCIe BCMA driver"); | 
|  | MODULE_LICENSE("GPL v2"); |