| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Read-Copy Update mechanism for mutual exclusion (tree-based version) |
| * Internal non-public definitions that provide either classic |
| * or preemptible semantics. |
| * |
| * Copyright Red Hat, 2009 |
| * Copyright IBM Corporation, 2009 |
| * |
| * Author: Ingo Molnar <mingo@elte.hu> |
| * Paul E. McKenney <paulmck@linux.ibm.com> |
| */ |
| |
| #include "../locking/rtmutex_common.h" |
| |
| #ifdef CONFIG_RCU_NOCB_CPU |
| static cpumask_var_t rcu_nocb_mask; /* CPUs to have callbacks offloaded. */ |
| static bool __read_mostly rcu_nocb_poll; /* Offload kthread are to poll. */ |
| #endif /* #ifdef CONFIG_RCU_NOCB_CPU */ |
| |
| /* |
| * Check the RCU kernel configuration parameters and print informative |
| * messages about anything out of the ordinary. |
| */ |
| static void __init rcu_bootup_announce_oddness(void) |
| { |
| if (IS_ENABLED(CONFIG_RCU_TRACE)) |
| pr_info("\tRCU event tracing is enabled.\n"); |
| if ((IS_ENABLED(CONFIG_64BIT) && RCU_FANOUT != 64) || |
| (!IS_ENABLED(CONFIG_64BIT) && RCU_FANOUT != 32)) |
| pr_info("\tCONFIG_RCU_FANOUT set to non-default value of %d.\n", |
| RCU_FANOUT); |
| if (rcu_fanout_exact) |
| pr_info("\tHierarchical RCU autobalancing is disabled.\n"); |
| if (IS_ENABLED(CONFIG_RCU_FAST_NO_HZ)) |
| pr_info("\tRCU dyntick-idle grace-period acceleration is enabled.\n"); |
| if (IS_ENABLED(CONFIG_PROVE_RCU)) |
| pr_info("\tRCU lockdep checking is enabled.\n"); |
| if (RCU_NUM_LVLS >= 4) |
| pr_info("\tFour(or more)-level hierarchy is enabled.\n"); |
| if (RCU_FANOUT_LEAF != 16) |
| pr_info("\tBuild-time adjustment of leaf fanout to %d.\n", |
| RCU_FANOUT_LEAF); |
| if (rcu_fanout_leaf != RCU_FANOUT_LEAF) |
| pr_info("\tBoot-time adjustment of leaf fanout to %d.\n", |
| rcu_fanout_leaf); |
| if (nr_cpu_ids != NR_CPUS) |
| pr_info("\tRCU restricting CPUs from NR_CPUS=%d to nr_cpu_ids=%u.\n", NR_CPUS, nr_cpu_ids); |
| #ifdef CONFIG_RCU_BOOST |
| pr_info("\tRCU priority boosting: priority %d delay %d ms.\n", |
| kthread_prio, CONFIG_RCU_BOOST_DELAY); |
| #endif |
| if (blimit != DEFAULT_RCU_BLIMIT) |
| pr_info("\tBoot-time adjustment of callback invocation limit to %ld.\n", blimit); |
| if (qhimark != DEFAULT_RCU_QHIMARK) |
| pr_info("\tBoot-time adjustment of callback high-water mark to %ld.\n", qhimark); |
| if (qlowmark != DEFAULT_RCU_QLOMARK) |
| pr_info("\tBoot-time adjustment of callback low-water mark to %ld.\n", qlowmark); |
| if (jiffies_till_first_fqs != ULONG_MAX) |
| pr_info("\tBoot-time adjustment of first FQS scan delay to %ld jiffies.\n", jiffies_till_first_fqs); |
| if (jiffies_till_next_fqs != ULONG_MAX) |
| pr_info("\tBoot-time adjustment of subsequent FQS scan delay to %ld jiffies.\n", jiffies_till_next_fqs); |
| if (jiffies_till_sched_qs != ULONG_MAX) |
| pr_info("\tBoot-time adjustment of scheduler-enlistment delay to %ld jiffies.\n", jiffies_till_sched_qs); |
| if (rcu_kick_kthreads) |
| pr_info("\tKick kthreads if too-long grace period.\n"); |
| if (IS_ENABLED(CONFIG_DEBUG_OBJECTS_RCU_HEAD)) |
| pr_info("\tRCU callback double-/use-after-free debug enabled.\n"); |
| if (gp_preinit_delay) |
| pr_info("\tRCU debug GP pre-init slowdown %d jiffies.\n", gp_preinit_delay); |
| if (gp_init_delay) |
| pr_info("\tRCU debug GP init slowdown %d jiffies.\n", gp_init_delay); |
| if (gp_cleanup_delay) |
| pr_info("\tRCU debug GP init slowdown %d jiffies.\n", gp_cleanup_delay); |
| if (!use_softirq) |
| pr_info("\tRCU_SOFTIRQ processing moved to rcuc kthreads.\n"); |
| if (IS_ENABLED(CONFIG_RCU_EQS_DEBUG)) |
| pr_info("\tRCU debug extended QS entry/exit.\n"); |
| rcupdate_announce_bootup_oddness(); |
| } |
| |
| #ifdef CONFIG_PREEMPT_RCU |
| |
| static void rcu_report_exp_rnp(struct rcu_node *rnp, bool wake); |
| static void rcu_read_unlock_special(struct task_struct *t); |
| |
| /* |
| * Tell them what RCU they are running. |
| */ |
| static void __init rcu_bootup_announce(void) |
| { |
| pr_info("Preemptible hierarchical RCU implementation.\n"); |
| rcu_bootup_announce_oddness(); |
| } |
| |
| /* Flags for rcu_preempt_ctxt_queue() decision table. */ |
| #define RCU_GP_TASKS 0x8 |
| #define RCU_EXP_TASKS 0x4 |
| #define RCU_GP_BLKD 0x2 |
| #define RCU_EXP_BLKD 0x1 |
| |
| /* |
| * Queues a task preempted within an RCU-preempt read-side critical |
| * section into the appropriate location within the ->blkd_tasks list, |
| * depending on the states of any ongoing normal and expedited grace |
| * periods. The ->gp_tasks pointer indicates which element the normal |
| * grace period is waiting on (NULL if none), and the ->exp_tasks pointer |
| * indicates which element the expedited grace period is waiting on (again, |
| * NULL if none). If a grace period is waiting on a given element in the |
| * ->blkd_tasks list, it also waits on all subsequent elements. Thus, |
| * adding a task to the tail of the list blocks any grace period that is |
| * already waiting on one of the elements. In contrast, adding a task |
| * to the head of the list won't block any grace period that is already |
| * waiting on one of the elements. |
| * |
| * This queuing is imprecise, and can sometimes make an ongoing grace |
| * period wait for a task that is not strictly speaking blocking it. |
| * Given the choice, we needlessly block a normal grace period rather than |
| * blocking an expedited grace period. |
| * |
| * Note that an endless sequence of expedited grace periods still cannot |
| * indefinitely postpone a normal grace period. Eventually, all of the |
| * fixed number of preempted tasks blocking the normal grace period that are |
| * not also blocking the expedited grace period will resume and complete |
| * their RCU read-side critical sections. At that point, the ->gp_tasks |
| * pointer will equal the ->exp_tasks pointer, at which point the end of |
| * the corresponding expedited grace period will also be the end of the |
| * normal grace period. |
| */ |
| static void rcu_preempt_ctxt_queue(struct rcu_node *rnp, struct rcu_data *rdp) |
| __releases(rnp->lock) /* But leaves rrupts disabled. */ |
| { |
| int blkd_state = (rnp->gp_tasks ? RCU_GP_TASKS : 0) + |
| (rnp->exp_tasks ? RCU_EXP_TASKS : 0) + |
| (rnp->qsmask & rdp->grpmask ? RCU_GP_BLKD : 0) + |
| (rnp->expmask & rdp->grpmask ? RCU_EXP_BLKD : 0); |
| struct task_struct *t = current; |
| |
| raw_lockdep_assert_held_rcu_node(rnp); |
| WARN_ON_ONCE(rdp->mynode != rnp); |
| WARN_ON_ONCE(!rcu_is_leaf_node(rnp)); |
| /* RCU better not be waiting on newly onlined CPUs! */ |
| WARN_ON_ONCE(rnp->qsmaskinitnext & ~rnp->qsmaskinit & rnp->qsmask & |
| rdp->grpmask); |
| |
| /* |
| * Decide where to queue the newly blocked task. In theory, |
| * this could be an if-statement. In practice, when I tried |
| * that, it was quite messy. |
| */ |
| switch (blkd_state) { |
| case 0: |
| case RCU_EXP_TASKS: |
| case RCU_EXP_TASKS + RCU_GP_BLKD: |
| case RCU_GP_TASKS: |
| case RCU_GP_TASKS + RCU_EXP_TASKS: |
| |
| /* |
| * Blocking neither GP, or first task blocking the normal |
| * GP but not blocking the already-waiting expedited GP. |
| * Queue at the head of the list to avoid unnecessarily |
| * blocking the already-waiting GPs. |
| */ |
| list_add(&t->rcu_node_entry, &rnp->blkd_tasks); |
| break; |
| |
| case RCU_EXP_BLKD: |
| case RCU_GP_BLKD: |
| case RCU_GP_BLKD + RCU_EXP_BLKD: |
| case RCU_GP_TASKS + RCU_EXP_BLKD: |
| case RCU_GP_TASKS + RCU_GP_BLKD + RCU_EXP_BLKD: |
| case RCU_GP_TASKS + RCU_EXP_TASKS + RCU_GP_BLKD + RCU_EXP_BLKD: |
| |
| /* |
| * First task arriving that blocks either GP, or first task |
| * arriving that blocks the expedited GP (with the normal |
| * GP already waiting), or a task arriving that blocks |
| * both GPs with both GPs already waiting. Queue at the |
| * tail of the list to avoid any GP waiting on any of the |
| * already queued tasks that are not blocking it. |
| */ |
| list_add_tail(&t->rcu_node_entry, &rnp->blkd_tasks); |
| break; |
| |
| case RCU_EXP_TASKS + RCU_EXP_BLKD: |
| case RCU_EXP_TASKS + RCU_GP_BLKD + RCU_EXP_BLKD: |
| case RCU_GP_TASKS + RCU_EXP_TASKS + RCU_EXP_BLKD: |
| |
| /* |
| * Second or subsequent task blocking the expedited GP. |
| * The task either does not block the normal GP, or is the |
| * first task blocking the normal GP. Queue just after |
| * the first task blocking the expedited GP. |
| */ |
| list_add(&t->rcu_node_entry, rnp->exp_tasks); |
| break; |
| |
| case RCU_GP_TASKS + RCU_GP_BLKD: |
| case RCU_GP_TASKS + RCU_EXP_TASKS + RCU_GP_BLKD: |
| |
| /* |
| * Second or subsequent task blocking the normal GP. |
| * The task does not block the expedited GP. Queue just |
| * after the first task blocking the normal GP. |
| */ |
| list_add(&t->rcu_node_entry, rnp->gp_tasks); |
| break; |
| |
| default: |
| |
| /* Yet another exercise in excessive paranoia. */ |
| WARN_ON_ONCE(1); |
| break; |
| } |
| |
| /* |
| * We have now queued the task. If it was the first one to |
| * block either grace period, update the ->gp_tasks and/or |
| * ->exp_tasks pointers, respectively, to reference the newly |
| * blocked tasks. |
| */ |
| if (!rnp->gp_tasks && (blkd_state & RCU_GP_BLKD)) { |
| rnp->gp_tasks = &t->rcu_node_entry; |
| WARN_ON_ONCE(rnp->completedqs == rnp->gp_seq); |
| } |
| if (!rnp->exp_tasks && (blkd_state & RCU_EXP_BLKD)) |
| rnp->exp_tasks = &t->rcu_node_entry; |
| WARN_ON_ONCE(!(blkd_state & RCU_GP_BLKD) != |
| !(rnp->qsmask & rdp->grpmask)); |
| WARN_ON_ONCE(!(blkd_state & RCU_EXP_BLKD) != |
| !(rnp->expmask & rdp->grpmask)); |
| raw_spin_unlock_rcu_node(rnp); /* interrupts remain disabled. */ |
| |
| /* |
| * Report the quiescent state for the expedited GP. This expedited |
| * GP should not be able to end until we report, so there should be |
| * no need to check for a subsequent expedited GP. (Though we are |
| * still in a quiescent state in any case.) |
| */ |
| if (blkd_state & RCU_EXP_BLKD && rdp->exp_deferred_qs) |
| rcu_report_exp_rdp(rdp); |
| else |
| WARN_ON_ONCE(rdp->exp_deferred_qs); |
| } |
| |
| /* |
| * Record a preemptible-RCU quiescent state for the specified CPU. |
| * Note that this does not necessarily mean that the task currently running |
| * on the CPU is in a quiescent state: Instead, it means that the current |
| * grace period need not wait on any RCU read-side critical section that |
| * starts later on this CPU. It also means that if the current task is |
| * in an RCU read-side critical section, it has already added itself to |
| * some leaf rcu_node structure's ->blkd_tasks list. In addition to the |
| * current task, there might be any number of other tasks blocked while |
| * in an RCU read-side critical section. |
| * |
| * Callers to this function must disable preemption. |
| */ |
| static void rcu_qs(void) |
| { |
| RCU_LOCKDEP_WARN(preemptible(), "rcu_qs() invoked with preemption enabled!!!\n"); |
| if (__this_cpu_read(rcu_data.cpu_no_qs.s)) { |
| trace_rcu_grace_period(TPS("rcu_preempt"), |
| __this_cpu_read(rcu_data.gp_seq), |
| TPS("cpuqs")); |
| __this_cpu_write(rcu_data.cpu_no_qs.b.norm, false); |
| barrier(); /* Coordinate with rcu_flavor_sched_clock_irq(). */ |
| WRITE_ONCE(current->rcu_read_unlock_special.b.need_qs, false); |
| } |
| } |
| |
| /* |
| * We have entered the scheduler, and the current task might soon be |
| * context-switched away from. If this task is in an RCU read-side |
| * critical section, we will no longer be able to rely on the CPU to |
| * record that fact, so we enqueue the task on the blkd_tasks list. |
| * The task will dequeue itself when it exits the outermost enclosing |
| * RCU read-side critical section. Therefore, the current grace period |
| * cannot be permitted to complete until the blkd_tasks list entries |
| * predating the current grace period drain, in other words, until |
| * rnp->gp_tasks becomes NULL. |
| * |
| * Caller must disable interrupts. |
| */ |
| void rcu_note_context_switch(bool preempt) |
| { |
| struct task_struct *t = current; |
| struct rcu_data *rdp = this_cpu_ptr(&rcu_data); |
| struct rcu_node *rnp; |
| |
| barrier(); /* Avoid RCU read-side critical sections leaking down. */ |
| trace_rcu_utilization(TPS("Start context switch")); |
| lockdep_assert_irqs_disabled(); |
| WARN_ON_ONCE(!preempt && t->rcu_read_lock_nesting > 0); |
| if (t->rcu_read_lock_nesting > 0 && |
| !t->rcu_read_unlock_special.b.blocked) { |
| |
| /* Possibly blocking in an RCU read-side critical section. */ |
| rnp = rdp->mynode; |
| raw_spin_lock_rcu_node(rnp); |
| t->rcu_read_unlock_special.b.blocked = true; |
| t->rcu_blocked_node = rnp; |
| |
| /* |
| * Verify the CPU's sanity, trace the preemption, and |
| * then queue the task as required based on the states |
| * of any ongoing and expedited grace periods. |
| */ |
| WARN_ON_ONCE((rdp->grpmask & rcu_rnp_online_cpus(rnp)) == 0); |
| WARN_ON_ONCE(!list_empty(&t->rcu_node_entry)); |
| trace_rcu_preempt_task(rcu_state.name, |
| t->pid, |
| (rnp->qsmask & rdp->grpmask) |
| ? rnp->gp_seq |
| : rcu_seq_snap(&rnp->gp_seq)); |
| rcu_preempt_ctxt_queue(rnp, rdp); |
| } else if (t->rcu_read_lock_nesting < 0 && |
| t->rcu_read_unlock_special.s) { |
| |
| /* |
| * Complete exit from RCU read-side critical section on |
| * behalf of preempted instance of __rcu_read_unlock(). |
| */ |
| rcu_read_unlock_special(t); |
| rcu_preempt_deferred_qs(t); |
| } else { |
| rcu_preempt_deferred_qs(t); |
| } |
| |
| /* |
| * Either we were not in an RCU read-side critical section to |
| * begin with, or we have now recorded that critical section |
| * globally. Either way, we can now note a quiescent state |
| * for this CPU. Again, if we were in an RCU read-side critical |
| * section, and if that critical section was blocking the current |
| * grace period, then the fact that the task has been enqueued |
| * means that we continue to block the current grace period. |
| */ |
| rcu_qs(); |
| if (rdp->exp_deferred_qs) |
| rcu_report_exp_rdp(rdp); |
| trace_rcu_utilization(TPS("End context switch")); |
| barrier(); /* Avoid RCU read-side critical sections leaking up. */ |
| } |
| EXPORT_SYMBOL_GPL(rcu_note_context_switch); |
| |
| /* |
| * Check for preempted RCU readers blocking the current grace period |
| * for the specified rcu_node structure. If the caller needs a reliable |
| * answer, it must hold the rcu_node's ->lock. |
| */ |
| static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp) |
| { |
| return rnp->gp_tasks != NULL; |
| } |
| |
| /* Bias and limit values for ->rcu_read_lock_nesting. */ |
| #define RCU_NEST_BIAS INT_MAX |
| #define RCU_NEST_NMAX (-INT_MAX / 2) |
| #define RCU_NEST_PMAX (INT_MAX / 2) |
| |
| /* |
| * Preemptible RCU implementation for rcu_read_lock(). |
| * Just increment ->rcu_read_lock_nesting, shared state will be updated |
| * if we block. |
| */ |
| void __rcu_read_lock(void) |
| { |
| current->rcu_read_lock_nesting++; |
| if (IS_ENABLED(CONFIG_PROVE_LOCKING)) |
| WARN_ON_ONCE(current->rcu_read_lock_nesting > RCU_NEST_PMAX); |
| barrier(); /* critical section after entry code. */ |
| } |
| EXPORT_SYMBOL_GPL(__rcu_read_lock); |
| |
| /* |
| * Preemptible RCU implementation for rcu_read_unlock(). |
| * Decrement ->rcu_read_lock_nesting. If the result is zero (outermost |
| * rcu_read_unlock()) and ->rcu_read_unlock_special is non-zero, then |
| * invoke rcu_read_unlock_special() to clean up after a context switch |
| * in an RCU read-side critical section and other special cases. |
| */ |
| void __rcu_read_unlock(void) |
| { |
| struct task_struct *t = current; |
| |
| if (t->rcu_read_lock_nesting != 1) { |
| --t->rcu_read_lock_nesting; |
| } else { |
| barrier(); /* critical section before exit code. */ |
| t->rcu_read_lock_nesting = -RCU_NEST_BIAS; |
| barrier(); /* assign before ->rcu_read_unlock_special load */ |
| if (unlikely(READ_ONCE(t->rcu_read_unlock_special.s))) |
| rcu_read_unlock_special(t); |
| barrier(); /* ->rcu_read_unlock_special load before assign */ |
| t->rcu_read_lock_nesting = 0; |
| } |
| if (IS_ENABLED(CONFIG_PROVE_LOCKING)) { |
| int rrln = t->rcu_read_lock_nesting; |
| |
| WARN_ON_ONCE(rrln < 0 && rrln > RCU_NEST_NMAX); |
| } |
| } |
| EXPORT_SYMBOL_GPL(__rcu_read_unlock); |
| |
| /* |
| * Advance a ->blkd_tasks-list pointer to the next entry, instead |
| * returning NULL if at the end of the list. |
| */ |
| static struct list_head *rcu_next_node_entry(struct task_struct *t, |
| struct rcu_node *rnp) |
| { |
| struct list_head *np; |
| |
| np = t->rcu_node_entry.next; |
| if (np == &rnp->blkd_tasks) |
| np = NULL; |
| return np; |
| } |
| |
| /* |
| * Return true if the specified rcu_node structure has tasks that were |
| * preempted within an RCU read-side critical section. |
| */ |
| static bool rcu_preempt_has_tasks(struct rcu_node *rnp) |
| { |
| return !list_empty(&rnp->blkd_tasks); |
| } |
| |
| /* |
| * Report deferred quiescent states. The deferral time can |
| * be quite short, for example, in the case of the call from |
| * rcu_read_unlock_special(). |
| */ |
| static void |
| rcu_preempt_deferred_qs_irqrestore(struct task_struct *t, unsigned long flags) |
| { |
| bool empty_exp; |
| bool empty_norm; |
| bool empty_exp_now; |
| struct list_head *np; |
| bool drop_boost_mutex = false; |
| struct rcu_data *rdp; |
| struct rcu_node *rnp; |
| union rcu_special special; |
| |
| /* |
| * If RCU core is waiting for this CPU to exit its critical section, |
| * report the fact that it has exited. Because irqs are disabled, |
| * t->rcu_read_unlock_special cannot change. |
| */ |
| special = t->rcu_read_unlock_special; |
| rdp = this_cpu_ptr(&rcu_data); |
| if (!special.s && !rdp->exp_deferred_qs) { |
| local_irq_restore(flags); |
| return; |
| } |
| t->rcu_read_unlock_special.b.deferred_qs = false; |
| if (special.b.need_qs) { |
| rcu_qs(); |
| t->rcu_read_unlock_special.b.need_qs = false; |
| if (!t->rcu_read_unlock_special.s && !rdp->exp_deferred_qs) { |
| local_irq_restore(flags); |
| return; |
| } |
| } |
| |
| /* |
| * Respond to a request by an expedited grace period for a |
| * quiescent state from this CPU. Note that requests from |
| * tasks are handled when removing the task from the |
| * blocked-tasks list below. |
| */ |
| if (rdp->exp_deferred_qs) { |
| rcu_report_exp_rdp(rdp); |
| if (!t->rcu_read_unlock_special.s) { |
| local_irq_restore(flags); |
| return; |
| } |
| } |
| |
| /* Clean up if blocked during RCU read-side critical section. */ |
| if (special.b.blocked) { |
| t->rcu_read_unlock_special.b.blocked = false; |
| |
| /* |
| * Remove this task from the list it blocked on. The task |
| * now remains queued on the rcu_node corresponding to the |
| * CPU it first blocked on, so there is no longer any need |
| * to loop. Retain a WARN_ON_ONCE() out of sheer paranoia. |
| */ |
| rnp = t->rcu_blocked_node; |
| raw_spin_lock_rcu_node(rnp); /* irqs already disabled. */ |
| WARN_ON_ONCE(rnp != t->rcu_blocked_node); |
| WARN_ON_ONCE(!rcu_is_leaf_node(rnp)); |
| empty_norm = !rcu_preempt_blocked_readers_cgp(rnp); |
| WARN_ON_ONCE(rnp->completedqs == rnp->gp_seq && |
| (!empty_norm || rnp->qsmask)); |
| empty_exp = sync_rcu_preempt_exp_done(rnp); |
| smp_mb(); /* ensure expedited fastpath sees end of RCU c-s. */ |
| np = rcu_next_node_entry(t, rnp); |
| list_del_init(&t->rcu_node_entry); |
| t->rcu_blocked_node = NULL; |
| trace_rcu_unlock_preempted_task(TPS("rcu_preempt"), |
| rnp->gp_seq, t->pid); |
| if (&t->rcu_node_entry == rnp->gp_tasks) |
| rnp->gp_tasks = np; |
| if (&t->rcu_node_entry == rnp->exp_tasks) |
| rnp->exp_tasks = np; |
| if (IS_ENABLED(CONFIG_RCU_BOOST)) { |
| /* Snapshot ->boost_mtx ownership w/rnp->lock held. */ |
| drop_boost_mutex = rt_mutex_owner(&rnp->boost_mtx) == t; |
| if (&t->rcu_node_entry == rnp->boost_tasks) |
| rnp->boost_tasks = np; |
| } |
| |
| /* |
| * If this was the last task on the current list, and if |
| * we aren't waiting on any CPUs, report the quiescent state. |
| * Note that rcu_report_unblock_qs_rnp() releases rnp->lock, |
| * so we must take a snapshot of the expedited state. |
| */ |
| empty_exp_now = sync_rcu_preempt_exp_done(rnp); |
| if (!empty_norm && !rcu_preempt_blocked_readers_cgp(rnp)) { |
| trace_rcu_quiescent_state_report(TPS("preempt_rcu"), |
| rnp->gp_seq, |
| 0, rnp->qsmask, |
| rnp->level, |
| rnp->grplo, |
| rnp->grphi, |
| !!rnp->gp_tasks); |
| rcu_report_unblock_qs_rnp(rnp, flags); |
| } else { |
| raw_spin_unlock_irqrestore_rcu_node(rnp, flags); |
| } |
| |
| /* Unboost if we were boosted. */ |
| if (IS_ENABLED(CONFIG_RCU_BOOST) && drop_boost_mutex) |
| rt_mutex_futex_unlock(&rnp->boost_mtx); |
| |
| /* |
| * If this was the last task on the expedited lists, |
| * then we need to report up the rcu_node hierarchy. |
| */ |
| if (!empty_exp && empty_exp_now) |
| rcu_report_exp_rnp(rnp, true); |
| } else { |
| local_irq_restore(flags); |
| } |
| } |
| |
| /* |
| * Is a deferred quiescent-state pending, and are we also not in |
| * an RCU read-side critical section? It is the caller's responsibility |
| * to ensure it is otherwise safe to report any deferred quiescent |
| * states. The reason for this is that it is safe to report a |
| * quiescent state during context switch even though preemption |
| * is disabled. This function cannot be expected to understand these |
| * nuances, so the caller must handle them. |
| */ |
| static bool rcu_preempt_need_deferred_qs(struct task_struct *t) |
| { |
| return (__this_cpu_read(rcu_data.exp_deferred_qs) || |
| READ_ONCE(t->rcu_read_unlock_special.s)) && |
| t->rcu_read_lock_nesting <= 0; |
| } |
| |
| /* |
| * Report a deferred quiescent state if needed and safe to do so. |
| * As with rcu_preempt_need_deferred_qs(), "safe" involves only |
| * not being in an RCU read-side critical section. The caller must |
| * evaluate safety in terms of interrupt, softirq, and preemption |
| * disabling. |
| */ |
| static void rcu_preempt_deferred_qs(struct task_struct *t) |
| { |
| unsigned long flags; |
| bool couldrecurse = t->rcu_read_lock_nesting >= 0; |
| |
| if (!rcu_preempt_need_deferred_qs(t)) |
| return; |
| if (couldrecurse) |
| t->rcu_read_lock_nesting -= RCU_NEST_BIAS; |
| local_irq_save(flags); |
| rcu_preempt_deferred_qs_irqrestore(t, flags); |
| if (couldrecurse) |
| t->rcu_read_lock_nesting += RCU_NEST_BIAS; |
| } |
| |
| /* |
| * Minimal handler to give the scheduler a chance to re-evaluate. |
| */ |
| static void rcu_preempt_deferred_qs_handler(struct irq_work *iwp) |
| { |
| struct rcu_data *rdp; |
| |
| rdp = container_of(iwp, struct rcu_data, defer_qs_iw); |
| rdp->defer_qs_iw_pending = false; |
| } |
| |
| /* |
| * Handle special cases during rcu_read_unlock(), such as needing to |
| * notify RCU core processing or task having blocked during the RCU |
| * read-side critical section. |
| */ |
| static void rcu_read_unlock_special(struct task_struct *t) |
| { |
| unsigned long flags; |
| bool preempt_bh_were_disabled = |
| !!(preempt_count() & (PREEMPT_MASK | SOFTIRQ_MASK)); |
| bool irqs_were_disabled; |
| |
| /* NMI handlers cannot block and cannot safely manipulate state. */ |
| if (in_nmi()) |
| return; |
| |
| local_irq_save(flags); |
| irqs_were_disabled = irqs_disabled_flags(flags); |
| if (preempt_bh_were_disabled || irqs_were_disabled) { |
| bool exp; |
| struct rcu_data *rdp = this_cpu_ptr(&rcu_data); |
| struct rcu_node *rnp = rdp->mynode; |
| |
| t->rcu_read_unlock_special.b.exp_hint = false; |
| exp = (t->rcu_blocked_node && t->rcu_blocked_node->exp_tasks) || |
| (rdp->grpmask & rnp->expmask) || |
| tick_nohz_full_cpu(rdp->cpu); |
| // Need to defer quiescent state until everything is enabled. |
| if ((exp || in_irq()) && irqs_were_disabled && use_softirq && |
| (in_irq() || !t->rcu_read_unlock_special.b.deferred_qs)) { |
| // Using softirq, safe to awaken, and we get |
| // no help from enabling irqs, unlike bh/preempt. |
| raise_softirq_irqoff(RCU_SOFTIRQ); |
| } else if (exp && irqs_were_disabled && !use_softirq && |
| !t->rcu_read_unlock_special.b.deferred_qs) { |
| // Safe to awaken and we get no help from enabling |
| // irqs, unlike bh/preempt. |
| invoke_rcu_core(); |
| } else { |
| // Enabling BH or preempt does reschedule, so... |
| // Also if no expediting or NO_HZ_FULL, slow is OK. |
| set_tsk_need_resched(current); |
| set_preempt_need_resched(); |
| if (IS_ENABLED(CONFIG_IRQ_WORK) && |
| !rdp->defer_qs_iw_pending && exp) { |
| // Get scheduler to re-evaluate and call hooks. |
| // If !IRQ_WORK, FQS scan will eventually IPI. |
| init_irq_work(&rdp->defer_qs_iw, |
| rcu_preempt_deferred_qs_handler); |
| rdp->defer_qs_iw_pending = true; |
| irq_work_queue_on(&rdp->defer_qs_iw, rdp->cpu); |
| } |
| } |
| t->rcu_read_unlock_special.b.deferred_qs = true; |
| local_irq_restore(flags); |
| return; |
| } |
| WRITE_ONCE(t->rcu_read_unlock_special.b.exp_hint, false); |
| rcu_preempt_deferred_qs_irqrestore(t, flags); |
| } |
| |
| /* |
| * Check that the list of blocked tasks for the newly completed grace |
| * period is in fact empty. It is a serious bug to complete a grace |
| * period that still has RCU readers blocked! This function must be |
| * invoked -before- updating this rnp's ->gp_seq, and the rnp's ->lock |
| * must be held by the caller. |
| * |
| * Also, if there are blocked tasks on the list, they automatically |
| * block the newly created grace period, so set up ->gp_tasks accordingly. |
| */ |
| static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp) |
| { |
| struct task_struct *t; |
| |
| RCU_LOCKDEP_WARN(preemptible(), "rcu_preempt_check_blocked_tasks() invoked with preemption enabled!!!\n"); |
| if (WARN_ON_ONCE(rcu_preempt_blocked_readers_cgp(rnp))) |
| dump_blkd_tasks(rnp, 10); |
| if (rcu_preempt_has_tasks(rnp) && |
| (rnp->qsmaskinit || rnp->wait_blkd_tasks)) { |
| rnp->gp_tasks = rnp->blkd_tasks.next; |
| t = container_of(rnp->gp_tasks, struct task_struct, |
| rcu_node_entry); |
| trace_rcu_unlock_preempted_task(TPS("rcu_preempt-GPS"), |
| rnp->gp_seq, t->pid); |
| } |
| WARN_ON_ONCE(rnp->qsmask); |
| } |
| |
| /* |
| * Check for a quiescent state from the current CPU, including voluntary |
| * context switches for Tasks RCU. When a task blocks, the task is |
| * recorded in the corresponding CPU's rcu_node structure, which is checked |
| * elsewhere, hence this function need only check for quiescent states |
| * related to the current CPU, not to those related to tasks. |
| */ |
| static void rcu_flavor_sched_clock_irq(int user) |
| { |
| struct task_struct *t = current; |
| |
| if (user || rcu_is_cpu_rrupt_from_idle()) { |
| rcu_note_voluntary_context_switch(current); |
| } |
| if (t->rcu_read_lock_nesting > 0 || |
| (preempt_count() & (PREEMPT_MASK | SOFTIRQ_MASK))) { |
| /* No QS, force context switch if deferred. */ |
| if (rcu_preempt_need_deferred_qs(t)) { |
| set_tsk_need_resched(t); |
| set_preempt_need_resched(); |
| } |
| } else if (rcu_preempt_need_deferred_qs(t)) { |
| rcu_preempt_deferred_qs(t); /* Report deferred QS. */ |
| return; |
| } else if (!t->rcu_read_lock_nesting) { |
| rcu_qs(); /* Report immediate QS. */ |
| return; |
| } |
| |
| /* If GP is oldish, ask for help from rcu_read_unlock_special(). */ |
| if (t->rcu_read_lock_nesting > 0 && |
| __this_cpu_read(rcu_data.core_needs_qs) && |
| __this_cpu_read(rcu_data.cpu_no_qs.b.norm) && |
| !t->rcu_read_unlock_special.b.need_qs && |
| time_after(jiffies, rcu_state.gp_start + HZ)) |
| t->rcu_read_unlock_special.b.need_qs = true; |
| } |
| |
| /* |
| * Check for a task exiting while in a preemptible-RCU read-side |
| * critical section, clean up if so. No need to issue warnings, as |
| * debug_check_no_locks_held() already does this if lockdep is enabled. |
| * Besides, if this function does anything other than just immediately |
| * return, there was a bug of some sort. Spewing warnings from this |
| * function is like as not to simply obscure important prior warnings. |
| */ |
| void exit_rcu(void) |
| { |
| struct task_struct *t = current; |
| |
| if (unlikely(!list_empty(¤t->rcu_node_entry))) { |
| t->rcu_read_lock_nesting = 1; |
| barrier(); |
| WRITE_ONCE(t->rcu_read_unlock_special.b.blocked, true); |
| } else if (unlikely(t->rcu_read_lock_nesting)) { |
| t->rcu_read_lock_nesting = 1; |
| } else { |
| return; |
| } |
| __rcu_read_unlock(); |
| rcu_preempt_deferred_qs(current); |
| } |
| |
| /* |
| * Dump the blocked-tasks state, but limit the list dump to the |
| * specified number of elements. |
| */ |
| static void |
| dump_blkd_tasks(struct rcu_node *rnp, int ncheck) |
| { |
| int cpu; |
| int i; |
| struct list_head *lhp; |
| bool onl; |
| struct rcu_data *rdp; |
| struct rcu_node *rnp1; |
| |
| raw_lockdep_assert_held_rcu_node(rnp); |
| pr_info("%s: grp: %d-%d level: %d ->gp_seq %ld ->completedqs %ld\n", |
| __func__, rnp->grplo, rnp->grphi, rnp->level, |
| (long)rnp->gp_seq, (long)rnp->completedqs); |
| for (rnp1 = rnp; rnp1; rnp1 = rnp1->parent) |
| pr_info("%s: %d:%d ->qsmask %#lx ->qsmaskinit %#lx ->qsmaskinitnext %#lx\n", |
| __func__, rnp1->grplo, rnp1->grphi, rnp1->qsmask, rnp1->qsmaskinit, rnp1->qsmaskinitnext); |
| pr_info("%s: ->gp_tasks %p ->boost_tasks %p ->exp_tasks %p\n", |
| __func__, rnp->gp_tasks, rnp->boost_tasks, rnp->exp_tasks); |
| pr_info("%s: ->blkd_tasks", __func__); |
| i = 0; |
| list_for_each(lhp, &rnp->blkd_tasks) { |
| pr_cont(" %p", lhp); |
| if (++i >= ncheck) |
| break; |
| } |
| pr_cont("\n"); |
| for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++) { |
| rdp = per_cpu_ptr(&rcu_data, cpu); |
| onl = !!(rdp->grpmask & rcu_rnp_online_cpus(rnp)); |
| pr_info("\t%d: %c online: %ld(%d) offline: %ld(%d)\n", |
| cpu, ".o"[onl], |
| (long)rdp->rcu_onl_gp_seq, rdp->rcu_onl_gp_flags, |
| (long)rdp->rcu_ofl_gp_seq, rdp->rcu_ofl_gp_flags); |
| } |
| } |
| |
| #else /* #ifdef CONFIG_PREEMPT_RCU */ |
| |
| /* |
| * Tell them what RCU they are running. |
| */ |
| static void __init rcu_bootup_announce(void) |
| { |
| pr_info("Hierarchical RCU implementation.\n"); |
| rcu_bootup_announce_oddness(); |
| } |
| |
| /* |
| * Note a quiescent state for PREEMPT=n. Because we do not need to know |
| * how many quiescent states passed, just if there was at least one since |
| * the start of the grace period, this just sets a flag. The caller must |
| * have disabled preemption. |
| */ |
| static void rcu_qs(void) |
| { |
| RCU_LOCKDEP_WARN(preemptible(), "rcu_qs() invoked with preemption enabled!!!"); |
| if (!__this_cpu_read(rcu_data.cpu_no_qs.s)) |
| return; |
| trace_rcu_grace_period(TPS("rcu_sched"), |
| __this_cpu_read(rcu_data.gp_seq), TPS("cpuqs")); |
| __this_cpu_write(rcu_data.cpu_no_qs.b.norm, false); |
| if (!__this_cpu_read(rcu_data.cpu_no_qs.b.exp)) |
| return; |
| __this_cpu_write(rcu_data.cpu_no_qs.b.exp, false); |
| rcu_report_exp_rdp(this_cpu_ptr(&rcu_data)); |
| } |
| |
| /* |
| * Register an urgently needed quiescent state. If there is an |
| * emergency, invoke rcu_momentary_dyntick_idle() to do a heavy-weight |
| * dyntick-idle quiescent state visible to other CPUs, which will in |
| * some cases serve for expedited as well as normal grace periods. |
| * Either way, register a lightweight quiescent state. |
| * |
| * The barrier() calls are redundant in the common case when this is |
| * called externally, but just in case this is called from within this |
| * file. |
| * |
| */ |
| void rcu_all_qs(void) |
| { |
| unsigned long flags; |
| |
| if (!raw_cpu_read(rcu_data.rcu_urgent_qs)) |
| return; |
| preempt_disable(); |
| /* Load rcu_urgent_qs before other flags. */ |
| if (!smp_load_acquire(this_cpu_ptr(&rcu_data.rcu_urgent_qs))) { |
| preempt_enable(); |
| return; |
| } |
| this_cpu_write(rcu_data.rcu_urgent_qs, false); |
| barrier(); /* Avoid RCU read-side critical sections leaking down. */ |
| if (unlikely(raw_cpu_read(rcu_data.rcu_need_heavy_qs))) { |
| local_irq_save(flags); |
| rcu_momentary_dyntick_idle(); |
| local_irq_restore(flags); |
| } |
| rcu_qs(); |
| barrier(); /* Avoid RCU read-side critical sections leaking up. */ |
| preempt_enable(); |
| } |
| EXPORT_SYMBOL_GPL(rcu_all_qs); |
| |
| /* |
| * Note a PREEMPT=n context switch. The caller must have disabled interrupts. |
| */ |
| void rcu_note_context_switch(bool preempt) |
| { |
| barrier(); /* Avoid RCU read-side critical sections leaking down. */ |
| trace_rcu_utilization(TPS("Start context switch")); |
| rcu_qs(); |
| /* Load rcu_urgent_qs before other flags. */ |
| if (!smp_load_acquire(this_cpu_ptr(&rcu_data.rcu_urgent_qs))) |
| goto out; |
| this_cpu_write(rcu_data.rcu_urgent_qs, false); |
| if (unlikely(raw_cpu_read(rcu_data.rcu_need_heavy_qs))) |
| rcu_momentary_dyntick_idle(); |
| if (!preempt) |
| rcu_tasks_qs(current); |
| out: |
| trace_rcu_utilization(TPS("End context switch")); |
| barrier(); /* Avoid RCU read-side critical sections leaking up. */ |
| } |
| EXPORT_SYMBOL_GPL(rcu_note_context_switch); |
| |
| /* |
| * Because preemptible RCU does not exist, there are never any preempted |
| * RCU readers. |
| */ |
| static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp) |
| { |
| return 0; |
| } |
| |
| /* |
| * Because there is no preemptible RCU, there can be no readers blocked. |
| */ |
| static bool rcu_preempt_has_tasks(struct rcu_node *rnp) |
| { |
| return false; |
| } |
| |
| /* |
| * Because there is no preemptible RCU, there can be no deferred quiescent |
| * states. |
| */ |
| static bool rcu_preempt_need_deferred_qs(struct task_struct *t) |
| { |
| return false; |
| } |
| static void rcu_preempt_deferred_qs(struct task_struct *t) { } |
| |
| /* |
| * Because there is no preemptible RCU, there can be no readers blocked, |
| * so there is no need to check for blocked tasks. So check only for |
| * bogus qsmask values. |
| */ |
| static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp) |
| { |
| WARN_ON_ONCE(rnp->qsmask); |
| } |
| |
| /* |
| * Check to see if this CPU is in a non-context-switch quiescent state, |
| * namely user mode and idle loop. |
| */ |
| static void rcu_flavor_sched_clock_irq(int user) |
| { |
| if (user || rcu_is_cpu_rrupt_from_idle()) { |
| |
| /* |
| * Get here if this CPU took its interrupt from user |
| * mode or from the idle loop, and if this is not a |
| * nested interrupt. In this case, the CPU is in |
| * a quiescent state, so note it. |
| * |
| * No memory barrier is required here because rcu_qs() |
| * references only CPU-local variables that other CPUs |
| * neither access nor modify, at least not while the |
| * corresponding CPU is online. |
| */ |
| |
| rcu_qs(); |
| } |
| } |
| |
| /* |
| * Because preemptible RCU does not exist, tasks cannot possibly exit |
| * while in preemptible RCU read-side critical sections. |
| */ |
| void exit_rcu(void) |
| { |
| } |
| |
| /* |
| * Dump the guaranteed-empty blocked-tasks state. Trust but verify. |
| */ |
| static void |
| dump_blkd_tasks(struct rcu_node *rnp, int ncheck) |
| { |
| WARN_ON_ONCE(!list_empty(&rnp->blkd_tasks)); |
| } |
| |
| #endif /* #else #ifdef CONFIG_PREEMPT_RCU */ |
| |
| /* |
| * If boosting, set rcuc kthreads to realtime priority. |
| */ |
| static void rcu_cpu_kthread_setup(unsigned int cpu) |
| { |
| #ifdef CONFIG_RCU_BOOST |
| struct sched_param sp; |
| |
| sp.sched_priority = kthread_prio; |
| sched_setscheduler_nocheck(current, SCHED_FIFO, &sp); |
| #endif /* #ifdef CONFIG_RCU_BOOST */ |
| } |
| |
| #ifdef CONFIG_RCU_BOOST |
| |
| /* |
| * Carry out RCU priority boosting on the task indicated by ->exp_tasks |
| * or ->boost_tasks, advancing the pointer to the next task in the |
| * ->blkd_tasks list. |
| * |
| * Note that irqs must be enabled: boosting the task can block. |
| * Returns 1 if there are more tasks needing to be boosted. |
| */ |
| static int rcu_boost(struct rcu_node *rnp) |
| { |
| unsigned long flags; |
| struct task_struct *t; |
| struct list_head *tb; |
| |
| if (READ_ONCE(rnp->exp_tasks) == NULL && |
| READ_ONCE(rnp->boost_tasks) == NULL) |
| return 0; /* Nothing left to boost. */ |
| |
| raw_spin_lock_irqsave_rcu_node(rnp, flags); |
| |
| /* |
| * Recheck under the lock: all tasks in need of boosting |
| * might exit their RCU read-side critical sections on their own. |
| */ |
| if (rnp->exp_tasks == NULL && rnp->boost_tasks == NULL) { |
| raw_spin_unlock_irqrestore_rcu_node(rnp, flags); |
| return 0; |
| } |
| |
| /* |
| * Preferentially boost tasks blocking expedited grace periods. |
| * This cannot starve the normal grace periods because a second |
| * expedited grace period must boost all blocked tasks, including |
| * those blocking the pre-existing normal grace period. |
| */ |
| if (rnp->exp_tasks != NULL) |
| tb = rnp->exp_tasks; |
| else |
| tb = rnp->boost_tasks; |
| |
| /* |
| * We boost task t by manufacturing an rt_mutex that appears to |
| * be held by task t. We leave a pointer to that rt_mutex where |
| * task t can find it, and task t will release the mutex when it |
| * exits its outermost RCU read-side critical section. Then |
| * simply acquiring this artificial rt_mutex will boost task |
| * t's priority. (Thanks to tglx for suggesting this approach!) |
| * |
| * Note that task t must acquire rnp->lock to remove itself from |
| * the ->blkd_tasks list, which it will do from exit() if from |
| * nowhere else. We therefore are guaranteed that task t will |
| * stay around at least until we drop rnp->lock. Note that |
| * rnp->lock also resolves races between our priority boosting |
| * and task t's exiting its outermost RCU read-side critical |
| * section. |
| */ |
| t = container_of(tb, struct task_struct, rcu_node_entry); |
| rt_mutex_init_proxy_locked(&rnp->boost_mtx, t); |
| raw_spin_unlock_irqrestore_rcu_node(rnp, flags); |
| /* Lock only for side effect: boosts task t's priority. */ |
| rt_mutex_lock(&rnp->boost_mtx); |
| rt_mutex_unlock(&rnp->boost_mtx); /* Then keep lockdep happy. */ |
| |
| return READ_ONCE(rnp->exp_tasks) != NULL || |
| READ_ONCE(rnp->boost_tasks) != NULL; |
| } |
| |
| /* |
| * Priority-boosting kthread, one per leaf rcu_node. |
| */ |
| static int rcu_boost_kthread(void *arg) |
| { |
| struct rcu_node *rnp = (struct rcu_node *)arg; |
| int spincnt = 0; |
| int more2boost; |
| |
| trace_rcu_utilization(TPS("Start boost kthread@init")); |
| for (;;) { |
| rnp->boost_kthread_status = RCU_KTHREAD_WAITING; |
| trace_rcu_utilization(TPS("End boost kthread@rcu_wait")); |
| rcu_wait(rnp->boost_tasks || rnp->exp_tasks); |
| trace_rcu_utilization(TPS("Start boost kthread@rcu_wait")); |
| rnp->boost_kthread_status = RCU_KTHREAD_RUNNING; |
| more2boost = rcu_boost(rnp); |
| if (more2boost) |
| spincnt++; |
| else |
| spincnt = 0; |
| if (spincnt > 10) { |
| rnp->boost_kthread_status = RCU_KTHREAD_YIELDING; |
| trace_rcu_utilization(TPS("End boost kthread@rcu_yield")); |
| schedule_timeout_interruptible(2); |
| trace_rcu_utilization(TPS("Start boost kthread@rcu_yield")); |
| spincnt = 0; |
| } |
| } |
| /* NOTREACHED */ |
| trace_rcu_utilization(TPS("End boost kthread@notreached")); |
| return 0; |
| } |
| |
| /* |
| * Check to see if it is time to start boosting RCU readers that are |
| * blocking the current grace period, and, if so, tell the per-rcu_node |
| * kthread to start boosting them. If there is an expedited grace |
| * period in progress, it is always time to boost. |
| * |
| * The caller must hold rnp->lock, which this function releases. |
| * The ->boost_kthread_task is immortal, so we don't need to worry |
| * about it going away. |
| */ |
| static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags) |
| __releases(rnp->lock) |
| { |
| raw_lockdep_assert_held_rcu_node(rnp); |
| if (!rcu_preempt_blocked_readers_cgp(rnp) && rnp->exp_tasks == NULL) { |
| raw_spin_unlock_irqrestore_rcu_node(rnp, flags); |
| return; |
| } |
| if (rnp->exp_tasks != NULL || |
| (rnp->gp_tasks != NULL && |
| rnp->boost_tasks == NULL && |
| rnp->qsmask == 0 && |
| ULONG_CMP_GE(jiffies, rnp->boost_time))) { |
| if (rnp->exp_tasks == NULL) |
| rnp->boost_tasks = rnp->gp_tasks; |
| raw_spin_unlock_irqrestore_rcu_node(rnp, flags); |
| rcu_wake_cond(rnp->boost_kthread_task, |
| rnp->boost_kthread_status); |
| } else { |
| raw_spin_unlock_irqrestore_rcu_node(rnp, flags); |
| } |
| } |
| |
| /* |
| * Is the current CPU running the RCU-callbacks kthread? |
| * Caller must have preemption disabled. |
| */ |
| static bool rcu_is_callbacks_kthread(void) |
| { |
| return __this_cpu_read(rcu_data.rcu_cpu_kthread_task) == current; |
| } |
| |
| #define RCU_BOOST_DELAY_JIFFIES DIV_ROUND_UP(CONFIG_RCU_BOOST_DELAY * HZ, 1000) |
| |
| /* |
| * Do priority-boost accounting for the start of a new grace period. |
| */ |
| static void rcu_preempt_boost_start_gp(struct rcu_node *rnp) |
| { |
| rnp->boost_time = jiffies + RCU_BOOST_DELAY_JIFFIES; |
| } |
| |
| /* |
| * Create an RCU-boost kthread for the specified node if one does not |
| * already exist. We only create this kthread for preemptible RCU. |
| * Returns zero if all is well, a negated errno otherwise. |
| */ |
| static int rcu_spawn_one_boost_kthread(struct rcu_node *rnp) |
| { |
| int rnp_index = rnp - rcu_get_root(); |
| unsigned long flags; |
| struct sched_param sp; |
| struct task_struct *t; |
| |
| if (!IS_ENABLED(CONFIG_PREEMPT_RCU)) |
| return 0; |
| |
| if (!rcu_scheduler_fully_active || rcu_rnp_online_cpus(rnp) == 0) |
| return 0; |
| |
| rcu_state.boost = 1; |
| if (rnp->boost_kthread_task != NULL) |
| return 0; |
| t = kthread_create(rcu_boost_kthread, (void *)rnp, |
| "rcub/%d", rnp_index); |
| if (IS_ERR(t)) |
| return PTR_ERR(t); |
| raw_spin_lock_irqsave_rcu_node(rnp, flags); |
| rnp->boost_kthread_task = t; |
| raw_spin_unlock_irqrestore_rcu_node(rnp, flags); |
| sp.sched_priority = kthread_prio; |
| sched_setscheduler_nocheck(t, SCHED_FIFO, &sp); |
| wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */ |
| return 0; |
| } |
| |
| /* |
| * Set the per-rcu_node kthread's affinity to cover all CPUs that are |
| * served by the rcu_node in question. The CPU hotplug lock is still |
| * held, so the value of rnp->qsmaskinit will be stable. |
| * |
| * We don't include outgoingcpu in the affinity set, use -1 if there is |
| * no outgoing CPU. If there are no CPUs left in the affinity set, |
| * this function allows the kthread to execute on any CPU. |
| */ |
| static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu) |
| { |
| struct task_struct *t = rnp->boost_kthread_task; |
| unsigned long mask = rcu_rnp_online_cpus(rnp); |
| cpumask_var_t cm; |
| int cpu; |
| |
| if (!t) |
| return; |
| if (!zalloc_cpumask_var(&cm, GFP_KERNEL)) |
| return; |
| for_each_leaf_node_possible_cpu(rnp, cpu) |
| if ((mask & leaf_node_cpu_bit(rnp, cpu)) && |
| cpu != outgoingcpu) |
| cpumask_set_cpu(cpu, cm); |
| if (cpumask_weight(cm) == 0) |
| cpumask_setall(cm); |
| set_cpus_allowed_ptr(t, cm); |
| free_cpumask_var(cm); |
| } |
| |
| /* |
| * Spawn boost kthreads -- called as soon as the scheduler is running. |
| */ |
| static void __init rcu_spawn_boost_kthreads(void) |
| { |
| struct rcu_node *rnp; |
| |
| rcu_for_each_leaf_node(rnp) |
| (void)rcu_spawn_one_boost_kthread(rnp); |
| } |
| |
| static void rcu_prepare_kthreads(int cpu) |
| { |
| struct rcu_data *rdp = per_cpu_ptr(&rcu_data, cpu); |
| struct rcu_node *rnp = rdp->mynode; |
| |
| /* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */ |
| if (rcu_scheduler_fully_active) |
| (void)rcu_spawn_one_boost_kthread(rnp); |
| } |
| |
| #else /* #ifdef CONFIG_RCU_BOOST */ |
| |
| static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags) |
| __releases(rnp->lock) |
| { |
| raw_spin_unlock_irqrestore_rcu_node(rnp, flags); |
| } |
| |
| static bool rcu_is_callbacks_kthread(void) |
| { |
| return false; |
| } |
| |
| static void rcu_preempt_boost_start_gp(struct rcu_node *rnp) |
| { |
| } |
| |
| static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu) |
| { |
| } |
| |
| static void __init rcu_spawn_boost_kthreads(void) |
| { |
| } |
| |
| static void rcu_prepare_kthreads(int cpu) |
| { |
| } |
| |
| #endif /* #else #ifdef CONFIG_RCU_BOOST */ |
| |
| #if !defined(CONFIG_RCU_FAST_NO_HZ) |
| |
| /* |
| * Check to see if any future RCU-related work will need to be done |
| * by the current CPU, even if none need be done immediately, returning |
| * 1 if so. This function is part of the RCU implementation; it is -not- |
| * an exported member of the RCU API. |
| * |
| * Because we not have RCU_FAST_NO_HZ, just check whether or not this |
| * CPU has RCU callbacks queued. |
| */ |
| int rcu_needs_cpu(u64 basemono, u64 *nextevt) |
| { |
| *nextevt = KTIME_MAX; |
| return !rcu_segcblist_empty(&this_cpu_ptr(&rcu_data)->cblist); |
| } |
| |
| /* |
| * Because we do not have RCU_FAST_NO_HZ, don't bother cleaning up |
| * after it. |
| */ |
| static void rcu_cleanup_after_idle(void) |
| { |
| } |
| |
| /* |
| * Do the idle-entry grace-period work, which, because CONFIG_RCU_FAST_NO_HZ=n, |
| * is nothing. |
| */ |
| static void rcu_prepare_for_idle(void) |
| { |
| } |
| |
| #else /* #if !defined(CONFIG_RCU_FAST_NO_HZ) */ |
| |
| /* |
| * This code is invoked when a CPU goes idle, at which point we want |
| * to have the CPU do everything required for RCU so that it can enter |
| * the energy-efficient dyntick-idle mode. This is handled by a |
| * state machine implemented by rcu_prepare_for_idle() below. |
| * |
| * The following three proprocessor symbols control this state machine: |
| * |
| * RCU_IDLE_GP_DELAY gives the number of jiffies that a CPU is permitted |
| * to sleep in dyntick-idle mode with RCU callbacks pending. This |
| * is sized to be roughly one RCU grace period. Those energy-efficiency |
| * benchmarkers who might otherwise be tempted to set this to a large |
| * number, be warned: Setting RCU_IDLE_GP_DELAY too high can hang your |
| * system. And if you are -that- concerned about energy efficiency, |
| * just power the system down and be done with it! |
| * RCU_IDLE_LAZY_GP_DELAY gives the number of jiffies that a CPU is |
| * permitted to sleep in dyntick-idle mode with only lazy RCU |
| * callbacks pending. Setting this too high can OOM your system. |
| * |
| * The values below work well in practice. If future workloads require |
| * adjustment, they can be converted into kernel config parameters, though |
| * making the state machine smarter might be a better option. |
| */ |
| #define RCU_IDLE_GP_DELAY 4 /* Roughly one grace period. */ |
| #define RCU_IDLE_LAZY_GP_DELAY (6 * HZ) /* Roughly six seconds. */ |
| |
| static int rcu_idle_gp_delay = RCU_IDLE_GP_DELAY; |
| module_param(rcu_idle_gp_delay, int, 0644); |
| static int rcu_idle_lazy_gp_delay = RCU_IDLE_LAZY_GP_DELAY; |
| module_param(rcu_idle_lazy_gp_delay, int, 0644); |
| |
| /* |
| * Try to advance callbacks on the current CPU, but only if it has been |
| * awhile since the last time we did so. Afterwards, if there are any |
| * callbacks ready for immediate invocation, return true. |
| */ |
| static bool __maybe_unused rcu_try_advance_all_cbs(void) |
| { |
| bool cbs_ready = false; |
| struct rcu_data *rdp = this_cpu_ptr(&rcu_data); |
| struct rcu_node *rnp; |
| |
| /* Exit early if we advanced recently. */ |
| if (jiffies == rdp->last_advance_all) |
| return false; |
| rdp->last_advance_all = jiffies; |
| |
| rnp = rdp->mynode; |
| |
| /* |
| * Don't bother checking unless a grace period has |
| * completed since we last checked and there are |
| * callbacks not yet ready to invoke. |
| */ |
| if ((rcu_seq_completed_gp(rdp->gp_seq, |
| rcu_seq_current(&rnp->gp_seq)) || |
| unlikely(READ_ONCE(rdp->gpwrap))) && |
| rcu_segcblist_pend_cbs(&rdp->cblist)) |
| note_gp_changes(rdp); |
| |
| if (rcu_segcblist_ready_cbs(&rdp->cblist)) |
| cbs_ready = true; |
| return cbs_ready; |
| } |
| |
| /* |
| * Allow the CPU to enter dyntick-idle mode unless it has callbacks ready |
| * to invoke. If the CPU has callbacks, try to advance them. Tell the |
| * caller to set the timeout based on whether or not there are non-lazy |
| * callbacks. |
| * |
| * The caller must have disabled interrupts. |
| */ |
| int rcu_needs_cpu(u64 basemono, u64 *nextevt) |
| { |
| struct rcu_data *rdp = this_cpu_ptr(&rcu_data); |
| unsigned long dj; |
| |
| lockdep_assert_irqs_disabled(); |
| |
| /* If no callbacks, RCU doesn't need the CPU. */ |
| if (rcu_segcblist_empty(&rdp->cblist)) { |
| *nextevt = KTIME_MAX; |
| return 0; |
| } |
| |
| /* Attempt to advance callbacks. */ |
| if (rcu_try_advance_all_cbs()) { |
| /* Some ready to invoke, so initiate later invocation. */ |
| invoke_rcu_core(); |
| return 1; |
| } |
| rdp->last_accelerate = jiffies; |
| |
| /* Request timer delay depending on laziness, and round. */ |
| rdp->all_lazy = !rcu_segcblist_n_nonlazy_cbs(&rdp->cblist); |
| if (rdp->all_lazy) { |
| dj = round_jiffies(rcu_idle_lazy_gp_delay + jiffies) - jiffies; |
| } else { |
| dj = round_up(rcu_idle_gp_delay + jiffies, |
| rcu_idle_gp_delay) - jiffies; |
| } |
| *nextevt = basemono + dj * TICK_NSEC; |
| return 0; |
| } |
| |
| /* |
| * Prepare a CPU for idle from an RCU perspective. The first major task |
| * is to sense whether nohz mode has been enabled or disabled via sysfs. |
| * The second major task is to check to see if a non-lazy callback has |
| * arrived at a CPU that previously had only lazy callbacks. The third |
| * major task is to accelerate (that is, assign grace-period numbers to) |
| * any recently arrived callbacks. |
| * |
| * The caller must have disabled interrupts. |
| */ |
| static void rcu_prepare_for_idle(void) |
| { |
| bool needwake; |
| struct rcu_data *rdp = this_cpu_ptr(&rcu_data); |
| struct rcu_node *rnp; |
| int tne; |
| |
| lockdep_assert_irqs_disabled(); |
| if (rcu_is_nocb_cpu(smp_processor_id())) |
| return; |
| |
| /* Handle nohz enablement switches conservatively. */ |
| tne = READ_ONCE(tick_nohz_active); |
| if (tne != rdp->tick_nohz_enabled_snap) { |
| if (!rcu_segcblist_empty(&rdp->cblist)) |
| invoke_rcu_core(); /* force nohz to see update. */ |
| rdp->tick_nohz_enabled_snap = tne; |
| return; |
| } |
| if (!tne) |
| return; |
| |
| /* |
| * If a non-lazy callback arrived at a CPU having only lazy |
| * callbacks, invoke RCU core for the side-effect of recalculating |
| * idle duration on re-entry to idle. |
| */ |
| if (rdp->all_lazy && rcu_segcblist_n_nonlazy_cbs(&rdp->cblist)) { |
| rdp->all_lazy = false; |
| invoke_rcu_core(); |
| return; |
| } |
| |
| /* |
| * If we have not yet accelerated this jiffy, accelerate all |
| * callbacks on this CPU. |
| */ |
| if (rdp->last_accelerate == jiffies) |
| return; |
| rdp->last_accelerate = jiffies; |
| if (rcu_segcblist_pend_cbs(&rdp->cblist)) { |
| rnp = rdp->mynode; |
| raw_spin_lock_rcu_node(rnp); /* irqs already disabled. */ |
| needwake = rcu_accelerate_cbs(rnp, rdp); |
| raw_spin_unlock_rcu_node(rnp); /* irqs remain disabled. */ |
| if (needwake) |
| rcu_gp_kthread_wake(); |
| } |
| } |
| |
| /* |
| * Clean up for exit from idle. Attempt to advance callbacks based on |
| * any grace periods that elapsed while the CPU was idle, and if any |
| * callbacks are now ready to invoke, initiate invocation. |
| */ |
| static void rcu_cleanup_after_idle(void) |
| { |
| lockdep_assert_irqs_disabled(); |
| if (rcu_is_nocb_cpu(smp_processor_id())) |
| return; |
| if (rcu_try_advance_all_cbs()) |
| invoke_rcu_core(); |
| } |
| |
| #endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */ |
| |
| #ifdef CONFIG_RCU_NOCB_CPU |
| |
| /* |
| * Offload callback processing from the boot-time-specified set of CPUs |
| * specified by rcu_nocb_mask. For the CPUs in the set, there are kthreads |
| * created that pull the callbacks from the corresponding CPU, wait for |
| * a grace period to elapse, and invoke the callbacks. These kthreads |
| * are organized into leaders, which manage incoming callbacks, wait for |
| * grace periods, and awaken followers, and the followers, which only |
| * invoke callbacks. Each leader is its own follower. The no-CBs CPUs |
| * do a wake_up() on their kthread when they insert a callback into any |
| * empty list, unless the rcu_nocb_poll boot parameter has been specified, |
| * in which case each kthread actively polls its CPU. (Which isn't so great |
| * for energy efficiency, but which does reduce RCU's overhead on that CPU.) |
| * |
| * This is intended to be used in conjunction with Frederic Weisbecker's |
| * adaptive-idle work, which would seriously reduce OS jitter on CPUs |
| * running CPU-bound user-mode computations. |
| * |
| * Offloading of callbacks can also be used as an energy-efficiency |
| * measure because CPUs with no RCU callbacks queued are more aggressive |
| * about entering dyntick-idle mode. |
| */ |
| |
| |
| /* |
| * Parse the boot-time rcu_nocb_mask CPU list from the kernel parameters. |
| * The string after the "rcu_nocbs=" is either "all" for all CPUs, or a |
| * comma-separated list of CPUs and/or CPU ranges. If an invalid list is |
| * given, a warning is emitted and all CPUs are offloaded. |
| */ |
| static int __init rcu_nocb_setup(char *str) |
| { |
| alloc_bootmem_cpumask_var(&rcu_nocb_mask); |
| if (!strcasecmp(str, "all")) |
| cpumask_setall(rcu_nocb_mask); |
| else |
| if (cpulist_parse(str, rcu_nocb_mask)) { |
| pr_warn("rcu_nocbs= bad CPU range, all CPUs set\n"); |
| cpumask_setall(rcu_nocb_mask); |
| } |
| return 1; |
| } |
| __setup("rcu_nocbs=", rcu_nocb_setup); |
| |
| static int __init parse_rcu_nocb_poll(char *arg) |
| { |
| rcu_nocb_poll = true; |
| return 0; |
| } |
| early_param("rcu_nocb_poll", parse_rcu_nocb_poll); |
| |
| /* |
| * Wake up any no-CBs CPUs' kthreads that were waiting on the just-ended |
| * grace period. |
| */ |
| static void rcu_nocb_gp_cleanup(struct swait_queue_head *sq) |
| { |
| swake_up_all(sq); |
| } |
| |
| static struct swait_queue_head *rcu_nocb_gp_get(struct rcu_node *rnp) |
| { |
| return &rnp->nocb_gp_wq[rcu_seq_ctr(rnp->gp_seq) & 0x1]; |
| } |
| |
| static void rcu_init_one_nocb(struct rcu_node *rnp) |
| { |
| init_swait_queue_head(&rnp->nocb_gp_wq[0]); |
| init_swait_queue_head(&rnp->nocb_gp_wq[1]); |
| } |
| |
| /* Is the specified CPU a no-CBs CPU? */ |
| bool rcu_is_nocb_cpu(int cpu) |
| { |
| if (cpumask_available(rcu_nocb_mask)) |
| return cpumask_test_cpu(cpu, rcu_nocb_mask); |
| return false; |
| } |
| |
| /* |
| * Kick the leader kthread for this NOCB group. Caller holds ->nocb_lock |
| * and this function releases it. |
| */ |
| static void __wake_nocb_leader(struct rcu_data *rdp, bool force, |
| unsigned long flags) |
| __releases(rdp->nocb_lock) |
| { |
| struct rcu_data *rdp_leader = rdp->nocb_leader; |
| |
| lockdep_assert_held(&rdp->nocb_lock); |
| if (!READ_ONCE(rdp_leader->nocb_kthread)) { |
| raw_spin_unlock_irqrestore(&rdp->nocb_lock, flags); |
| return; |
| } |
| if (rdp_leader->nocb_leader_sleep || force) { |
| /* Prior smp_mb__after_atomic() orders against prior enqueue. */ |
| WRITE_ONCE(rdp_leader->nocb_leader_sleep, false); |
| del_timer(&rdp->nocb_timer); |
| raw_spin_unlock_irqrestore(&rdp->nocb_lock, flags); |
| smp_mb(); /* ->nocb_leader_sleep before swake_up_one(). */ |
| swake_up_one(&rdp_leader->nocb_wq); |
| } else { |
| raw_spin_unlock_irqrestore(&rdp->nocb_lock, flags); |
| } |
| } |
| |
| /* |
| * Kick the leader kthread for this NOCB group, but caller has not |
| * acquired locks. |
| */ |
| static void wake_nocb_leader(struct rcu_data *rdp, bool force) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&rdp->nocb_lock, flags); |
| __wake_nocb_leader(rdp, force, flags); |
| } |
| |
| /* |
| * Arrange to wake the leader kthread for this NOCB group at some |
| * future time when it is safe to do so. |
| */ |
| static void wake_nocb_leader_defer(struct rcu_data *rdp, int waketype, |
| const char *reason) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&rdp->nocb_lock, flags); |
| if (rdp->nocb_defer_wakeup == RCU_NOCB_WAKE_NOT) |
| mod_timer(&rdp->nocb_timer, jiffies + 1); |
| WRITE_ONCE(rdp->nocb_defer_wakeup, waketype); |
| trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, reason); |
| raw_spin_unlock_irqrestore(&rdp->nocb_lock, flags); |
| } |
| |
| /* Does rcu_barrier need to queue an RCU callback on the specified CPU? */ |
| static bool rcu_nocb_cpu_needs_barrier(int cpu) |
| { |
| struct rcu_data *rdp = per_cpu_ptr(&rcu_data, cpu); |
| unsigned long ret; |
| #ifdef CONFIG_PROVE_RCU |
| struct rcu_head *rhp; |
| #endif /* #ifdef CONFIG_PROVE_RCU */ |
| |
| /* |
| * Check count of all no-CBs callbacks awaiting invocation. |
| * There needs to be a barrier before this function is called, |
| * but associated with a prior determination that no more |
| * callbacks would be posted. In the worst case, the first |
| * barrier in rcu_barrier() suffices (but the caller cannot |
| * necessarily rely on this, not a substitute for the caller |
| * getting the concurrency design right!). There must also be a |
| * barrier between the following load and posting of a callback |
| * (if a callback is in fact needed). This is associated with an |
| * atomic_inc() in the caller. |
| */ |
| ret = rcu_get_n_cbs_nocb_cpu(rdp); |
| |
| #ifdef CONFIG_PROVE_RCU |
| rhp = READ_ONCE(rdp->nocb_head); |
| if (!rhp) |
| rhp = READ_ONCE(rdp->nocb_gp_head); |
| if (!rhp) |
| rhp = READ_ONCE(rdp->nocb_follower_head); |
| |
| /* Having no rcuo kthread but CBs after scheduler starts is bad! */ |
| if (!READ_ONCE(rdp->nocb_kthread) && rhp && |
| rcu_scheduler_fully_active) { |
| /* RCU callback enqueued before CPU first came online??? */ |
| pr_err("RCU: Never-onlined no-CBs CPU %d has CB %p\n", |
| cpu, rhp->func); |
| WARN_ON_ONCE(1); |
| } |
| #endif /* #ifdef CONFIG_PROVE_RCU */ |
| |
| return !!ret; |
| } |
| |
| /* |
| * Enqueue the specified string of rcu_head structures onto the specified |
| * CPU's no-CBs lists. The CPU is specified by rdp, the head of the |
| * string by rhp, and the tail of the string by rhtp. The non-lazy/lazy |
| * counts are supplied by rhcount and rhcount_lazy. |
| * |
| * If warranted, also wake up the kthread servicing this CPUs queues. |
| */ |
| static void __call_rcu_nocb_enqueue(struct rcu_data *rdp, |
| struct rcu_head *rhp, |
| struct rcu_head **rhtp, |
| int rhcount, int rhcount_lazy, |
| unsigned long flags) |
| { |
| int len; |
| struct rcu_head **old_rhpp; |
| struct task_struct *t; |
| |
| /* Enqueue the callback on the nocb list and update counts. */ |
| atomic_long_add(rhcount, &rdp->nocb_q_count); |
| /* rcu_barrier() relies on ->nocb_q_count add before xchg. */ |
| old_rhpp = xchg(&rdp->nocb_tail, rhtp); |
| WRITE_ONCE(*old_rhpp, rhp); |
| atomic_long_add(rhcount_lazy, &rdp->nocb_q_count_lazy); |
| smp_mb__after_atomic(); /* Store *old_rhpp before _wake test. */ |
| |
| /* If we are not being polled and there is a kthread, awaken it ... */ |
| t = READ_ONCE(rdp->nocb_kthread); |
| if (rcu_nocb_poll || !t) { |
| trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, |
| TPS("WakeNotPoll")); |
| return; |
| } |
| len = rcu_get_n_cbs_nocb_cpu(rdp); |
| if (old_rhpp == &rdp->nocb_head) { |
| if (!irqs_disabled_flags(flags)) { |
| /* ... if queue was empty ... */ |
| wake_nocb_leader(rdp, false); |
| trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, |
| TPS("WakeEmpty")); |
| } else { |
| wake_nocb_leader_defer(rdp, RCU_NOCB_WAKE, |
| TPS("WakeEmptyIsDeferred")); |
| } |
| rdp->qlen_last_fqs_check = 0; |
| } else if (len > rdp->qlen_last_fqs_check + qhimark) { |
| /* ... or if many callbacks queued. */ |
| if (!irqs_disabled_flags(flags)) { |
| wake_nocb_leader(rdp, true); |
| trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, |
| TPS("WakeOvf")); |
| } else { |
| wake_nocb_leader_defer(rdp, RCU_NOCB_WAKE_FORCE, |
| TPS("WakeOvfIsDeferred")); |
| } |
| rdp->qlen_last_fqs_check = LONG_MAX / 2; |
| } else { |
| trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("WakeNot")); |
| } |
| return; |
| } |
| |
| /* |
| * This is a helper for __call_rcu(), which invokes this when the normal |
| * callback queue is inoperable. If this is not a no-CBs CPU, this |
| * function returns failure back to __call_rcu(), which can complain |
| * appropriately. |
| * |
| * Otherwise, this function queues the callback where the corresponding |
| * "rcuo" kthread can find it. |
| */ |
| static bool __call_rcu_nocb(struct rcu_data *rdp, struct rcu_head *rhp, |
| bool lazy, unsigned long flags) |
| { |
| |
| if (!rcu_is_nocb_cpu(rdp->cpu)) |
| return false; |
| __call_rcu_nocb_enqueue(rdp, rhp, &rhp->next, 1, lazy, flags); |
| if (__is_kfree_rcu_offset((unsigned long)rhp->func)) |
| trace_rcu_kfree_callback(rcu_state.name, rhp, |
| (unsigned long)rhp->func, |
| -atomic_long_read(&rdp->nocb_q_count_lazy), |
| -rcu_get_n_cbs_nocb_cpu(rdp)); |
| else |
| trace_rcu_callback(rcu_state.name, rhp, |
| -atomic_long_read(&rdp->nocb_q_count_lazy), |
| -rcu_get_n_cbs_nocb_cpu(rdp)); |
| |
| /* |
| * If called from an extended quiescent state with interrupts |
| * disabled, invoke the RCU core in order to allow the idle-entry |
| * deferred-wakeup check to function. |
| */ |
| if (irqs_disabled_flags(flags) && |
| !rcu_is_watching() && |
| cpu_online(smp_processor_id())) |
| invoke_rcu_core(); |
| |
| return true; |
| } |
| |
| /* |
| * Adopt orphaned callbacks on a no-CBs CPU, or return 0 if this is |
| * not a no-CBs CPU. |
| */ |
| static bool __maybe_unused rcu_nocb_adopt_orphan_cbs(struct rcu_data *my_rdp, |
| struct rcu_data *rdp, |
| unsigned long flags) |
| { |
| lockdep_assert_irqs_disabled(); |
| if (!rcu_is_nocb_cpu(smp_processor_id())) |
| return false; /* Not NOCBs CPU, caller must migrate CBs. */ |
| __call_rcu_nocb_enqueue(my_rdp, rcu_segcblist_head(&rdp->cblist), |
| rcu_segcblist_tail(&rdp->cblist), |
| rcu_segcblist_n_cbs(&rdp->cblist), |
| rcu_segcblist_n_lazy_cbs(&rdp->cblist), flags); |
| rcu_segcblist_init(&rdp->cblist); |
| rcu_segcblist_disable(&rdp->cblist); |
| return true; |
| } |
| |
| /* |
| * If necessary, kick off a new grace period, and either way wait |
| * for a subsequent grace period to complete. |
| */ |
| static void rcu_nocb_wait_gp(struct rcu_data *rdp) |
| { |
| unsigned long c; |
| bool d; |
| unsigned long flags; |
| bool needwake; |
| struct rcu_node *rnp = rdp->mynode; |
| |
| local_irq_save(flags); |
| c = rcu_seq_snap(&rcu_state.gp_seq); |
| if (!rdp->gpwrap && ULONG_CMP_GE(rdp->gp_seq_needed, c)) { |
| local_irq_restore(flags); |
| } else { |
| raw_spin_lock_rcu_node(rnp); /* irqs already disabled. */ |
| needwake = rcu_start_this_gp(rnp, rdp, c); |
| raw_spin_unlock_irqrestore_rcu_node(rnp, flags); |
| if (needwake) |
| rcu_gp_kthread_wake(); |
| } |
| |
| /* |
| * Wait for the grace period. Do so interruptibly to avoid messing |
| * up the load average. |
| */ |
| trace_rcu_this_gp(rnp, rdp, c, TPS("StartWait")); |
| for (;;) { |
| swait_event_interruptible_exclusive( |
| rnp->nocb_gp_wq[rcu_seq_ctr(c) & 0x1], |
| (d = rcu_seq_done(&rnp->gp_seq, c))); |
| if (likely(d)) |
| break; |
| WARN_ON(signal_pending(current)); |
| trace_rcu_this_gp(rnp, rdp, c, TPS("ResumeWait")); |
| } |
| trace_rcu_this_gp(rnp, rdp, c, TPS("EndWait")); |
| smp_mb(); /* Ensure that CB invocation happens after GP end. */ |
| } |
| |
| /* |
| * Leaders come here to wait for additional callbacks to show up. |
| * This function does not return until callbacks appear. |
| */ |
| static void nocb_leader_wait(struct rcu_data *my_rdp) |
| { |
| bool firsttime = true; |
| unsigned long flags; |
| bool gotcbs; |
| struct rcu_data *rdp; |
| struct rcu_head **tail; |
| |
| wait_again: |
| |
| /* Wait for callbacks to appear. */ |
| if (!rcu_nocb_poll) { |
| trace_rcu_nocb_wake(rcu_state.name, my_rdp->cpu, TPS("Sleep")); |
| swait_event_interruptible_exclusive(my_rdp->nocb_wq, |
| !READ_ONCE(my_rdp->nocb_leader_sleep)); |
| raw_spin_lock_irqsave(&my_rdp->nocb_lock, flags); |
| my_rdp->nocb_leader_sleep = true; |
| WRITE_ONCE(my_rdp->nocb_defer_wakeup, RCU_NOCB_WAKE_NOT); |
| del_timer(&my_rdp->nocb_timer); |
| raw_spin_unlock_irqrestore(&my_rdp->nocb_lock, flags); |
| } else if (firsttime) { |
| firsttime = false; /* Don't drown trace log with "Poll"! */ |
| trace_rcu_nocb_wake(rcu_state.name, my_rdp->cpu, TPS("Poll")); |
| } |
| |
| /* |
| * Each pass through the following loop checks a follower for CBs. |
| * We are our own first follower. Any CBs found are moved to |
| * nocb_gp_head, where they await a grace period. |
| */ |
| gotcbs = false; |
| smp_mb(); /* wakeup and _sleep before ->nocb_head reads. */ |
| for (rdp = my_rdp; rdp; rdp = rdp->nocb_next_follower) { |
| rdp->nocb_gp_head = READ_ONCE(rdp->nocb_head); |
| if (!rdp->nocb_gp_head) |
| continue; /* No CBs here, try next follower. */ |
| |
| /* Move callbacks to wait-for-GP list, which is empty. */ |
| WRITE_ONCE(rdp->nocb_head, NULL); |
| rdp->nocb_gp_tail = xchg(&rdp->nocb_tail, &rdp->nocb_head); |
| gotcbs = true; |
| } |
| |
| /* No callbacks? Sleep a bit if polling, and go retry. */ |
| if (unlikely(!gotcbs)) { |
| WARN_ON(signal_pending(current)); |
| if (rcu_nocb_poll) { |
| schedule_timeout_interruptible(1); |
| } else { |
| trace_rcu_nocb_wake(rcu_state.name, my_rdp->cpu, |
| TPS("WokeEmpty")); |
| } |
| goto wait_again; |
| } |
| |
| /* Wait for one grace period. */ |
| rcu_nocb_wait_gp(my_rdp); |
| |
| /* Each pass through the following loop wakes a follower, if needed. */ |
| for (rdp = my_rdp; rdp; rdp = rdp->nocb_next_follower) { |
| if (!rcu_nocb_poll && |
| READ_ONCE(rdp->nocb_head) && |
| READ_ONCE(my_rdp->nocb_leader_sleep)) { |
| raw_spin_lock_irqsave(&my_rdp->nocb_lock, flags); |
| my_rdp->nocb_leader_sleep = false;/* No need to sleep.*/ |
| raw_spin_unlock_irqrestore(&my_rdp->nocb_lock, flags); |
| } |
| if (!rdp->nocb_gp_head) |
| continue; /* No CBs, so no need to wake follower. */ |
| |
| /* Append callbacks to follower's "done" list. */ |
| raw_spin_lock_irqsave(&rdp->nocb_lock, flags); |
| tail = rdp->nocb_follower_tail; |
| rdp->nocb_follower_tail = rdp->nocb_gp_tail; |
| *tail = rdp->nocb_gp_head; |
| raw_spin_unlock_irqrestore(&rdp->nocb_lock, flags); |
| if (rdp != my_rdp && tail == &rdp->nocb_follower_head) { |
| /* List was empty, so wake up the follower. */ |
| swake_up_one(&rdp->nocb_wq); |
| } |
| } |
| |
| /* If we (the leader) don't have CBs, go wait some more. */ |
| if (!my_rdp->nocb_follower_head) |
| goto wait_again; |
| } |
| |
| /* |
| * Followers come here to wait for additional callbacks to show up. |
| * This function does not return until callbacks appear. |
| */ |
| static void nocb_follower_wait(struct rcu_data *rdp) |
| { |
| for (;;) { |
| trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("FollowerSleep")); |
| swait_event_interruptible_exclusive(rdp->nocb_wq, |
| READ_ONCE(rdp->nocb_follower_head)); |
| if (smp_load_acquire(&rdp->nocb_follower_head)) { |
| /* ^^^ Ensure CB invocation follows _head test. */ |
| return; |
| } |
| WARN_ON(signal_pending(current)); |
| trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("WokeEmpty")); |
| } |
| } |
| |
| /* |
| * Per-rcu_data kthread, but only for no-CBs CPUs. Each kthread invokes |
| * callbacks queued by the corresponding no-CBs CPU, however, there is |
| * an optional leader-follower relationship so that the grace-period |
| * kthreads don't have to do quite so many wakeups. |
| */ |
| static int rcu_nocb_kthread(void *arg) |
| { |
| int c, cl; |
| unsigned long flags; |
| struct rcu_head *list; |
| struct rcu_head *next; |
| struct rcu_head **tail; |
| struct rcu_data *rdp = arg; |
| |
| /* Each pass through this loop invokes one batch of callbacks */ |
| for (;;) { |
| /* Wait for callbacks. */ |
| if (rdp->nocb_leader == rdp) |
| nocb_leader_wait(rdp); |
| else |
| nocb_follower_wait(rdp); |
| |
| /* Pull the ready-to-invoke callbacks onto local list. */ |
| raw_spin_lock_irqsave(&rdp->nocb_lock, flags); |
| list = rdp->nocb_follower_head; |
| rdp->nocb_follower_head = NULL; |
| tail = rdp->nocb_follower_tail; |
| rdp->nocb_follower_tail = &rdp->nocb_follower_head; |
| raw_spin_unlock_irqrestore(&rdp->nocb_lock, flags); |
| if (WARN_ON_ONCE(!list)) |
| continue; |
| trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("WokeNonEmpty")); |
| |
| /* Each pass through the following loop invokes a callback. */ |
| trace_rcu_batch_start(rcu_state.name, |
| atomic_long_read(&rdp->nocb_q_count_lazy), |
| rcu_get_n_cbs_nocb_cpu(rdp), -1); |
| c = cl = 0; |
| while (list) { |
| next = list->next; |
| /* Wait for enqueuing to complete, if needed. */ |
| while (next == NULL && &list->next != tail) { |
| trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, |
| TPS("WaitQueue")); |
| schedule_timeout_interruptible(1); |
| trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, |
| TPS("WokeQueue")); |
| next = list->next; |
| } |
| debug_rcu_head_unqueue(list); |
| local_bh_disable(); |
| if (__rcu_reclaim(rcu_state.name, list)) |
| cl++; |
| c++; |
| local_bh_enable(); |
| cond_resched_tasks_rcu_qs(); |
| list = next; |
| } |
| trace_rcu_batch_end(rcu_state.name, c, !!list, 0, 0, 1); |
| smp_mb__before_atomic(); /* _add after CB invocation. */ |
| atomic_long_add(-c, &rdp->nocb_q_count); |
| atomic_long_add(-cl, &rdp->nocb_q_count_lazy); |
| } |
| return 0; |
| } |
| |
| /* Is a deferred wakeup of rcu_nocb_kthread() required? */ |
| static int rcu_nocb_need_deferred_wakeup(struct rcu_data *rdp) |
| { |
| return READ_ONCE(rdp->nocb_defer_wakeup); |
| } |
| |
| /* Do a deferred wakeup of rcu_nocb_kthread(). */ |
| static void do_nocb_deferred_wakeup_common(struct rcu_data *rdp) |
| { |
| unsigned long flags; |
| int ndw; |
| |
| raw_spin_lock_irqsave(&rdp->nocb_lock, flags); |
| if (!rcu_nocb_need_deferred_wakeup(rdp)) { |
| raw_spin_unlock_irqrestore(&rdp->nocb_lock, flags); |
| return; |
| } |
| ndw = READ_ONCE(rdp->nocb_defer_wakeup); |
| WRITE_ONCE(rdp->nocb_defer_wakeup, RCU_NOCB_WAKE_NOT); |
| __wake_nocb_leader(rdp, ndw == RCU_NOCB_WAKE_FORCE, flags); |
| trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("DeferredWake")); |
| } |
| |
| /* Do a deferred wakeup of rcu_nocb_kthread() from a timer handler. */ |
| static void do_nocb_deferred_wakeup_timer(struct timer_list *t) |
| { |
| struct rcu_data *rdp = from_timer(rdp, t, nocb_timer); |
| |
| do_nocb_deferred_wakeup_common(rdp); |
| } |
| |
| /* |
| * Do a deferred wakeup of rcu_nocb_kthread() from fastpath. |
| * This means we do an inexact common-case check. Note that if |
| * we miss, ->nocb_timer will eventually clean things up. |
| */ |
| static void do_nocb_deferred_wakeup(struct rcu_data *rdp) |
| { |
| if (rcu_nocb_need_deferred_wakeup(rdp)) |
| do_nocb_deferred_wakeup_common(rdp); |
| } |
| |
| void __init rcu_init_nohz(void) |
| { |
| int cpu; |
| bool need_rcu_nocb_mask = false; |
| |
| #if defined(CONFIG_NO_HZ_FULL) |
| if (tick_nohz_full_running && cpumask_weight(tick_nohz_full_mask)) |
| need_rcu_nocb_mask = true; |
| #endif /* #if defined(CONFIG_NO_HZ_FULL) */ |
| |
| if (!cpumask_available(rcu_nocb_mask) && need_rcu_nocb_mask) { |
| if (!zalloc_cpumask_var(&rcu_nocb_mask, GFP_KERNEL)) { |
| pr_info("rcu_nocb_mask allocation failed, callback offloading disabled.\n"); |
| return; |
| } |
| } |
| if (!cpumask_available(rcu_nocb_mask)) |
| return; |
| |
| #if defined(CONFIG_NO_HZ_FULL) |
| if (tick_nohz_full_running) |
| cpumask_or(rcu_nocb_mask, rcu_nocb_mask, tick_nohz_full_mask); |
| #endif /* #if defined(CONFIG_NO_HZ_FULL) */ |
| |
| if (!cpumask_subset(rcu_nocb_mask, cpu_possible_mask)) { |
| pr_info("\tNote: kernel parameter 'rcu_nocbs=', 'nohz_full', or 'isolcpus=' contains nonexistent CPUs.\n"); |
| cpumask_and(rcu_nocb_mask, cpu_possible_mask, |
| rcu_nocb_mask); |
| } |
| if (cpumask_empty(rcu_nocb_mask)) |
| pr_info("\tOffload RCU callbacks from CPUs: (none).\n"); |
| else |
| pr_info("\tOffload RCU callbacks from CPUs: %*pbl.\n", |
| cpumask_pr_args(rcu_nocb_mask)); |
| if (rcu_nocb_poll) |
| pr_info("\tPoll for callbacks from no-CBs CPUs.\n"); |
| |
| for_each_cpu(cpu, rcu_nocb_mask) |
| init_nocb_callback_list(per_cpu_ptr(&rcu_data, cpu)); |
| rcu_organize_nocb_kthreads(); |
| } |
| |
| /* Initialize per-rcu_data variables for no-CBs CPUs. */ |
| static void __init rcu_boot_init_nocb_percpu_data(struct rcu_data *rdp) |
| { |
| rdp->nocb_tail = &rdp->nocb_head; |
| init_swait_queue_head(&rdp->nocb_wq); |
| rdp->nocb_follower_tail = &rdp->nocb_follower_head; |
| raw_spin_lock_init(&rdp->nocb_lock); |
| timer_setup(&rdp->nocb_timer, do_nocb_deferred_wakeup_timer, 0); |
| } |
| |
| /* |
| * If the specified CPU is a no-CBs CPU that does not already have its |
| * rcuo kthread, spawn it. If the CPUs are brought online out of order, |
| * this can require re-organizing the leader-follower relationships. |
| */ |
| static void rcu_spawn_one_nocb_kthread(int cpu) |
| { |
| struct rcu_data *rdp; |
| struct rcu_data *rdp_last; |
| struct rcu_data *rdp_old_leader; |
| struct rcu_data *rdp_spawn = per_cpu_ptr(&rcu_data, cpu); |
| struct task_struct *t; |
| |
| /* |
| * If this isn't a no-CBs CPU or if it already has an rcuo kthread, |
| * then nothing to do. |
| */ |
| if (!rcu_is_nocb_cpu(cpu) || rdp_spawn->nocb_kthread) |
| return; |
| |
| /* If we didn't spawn the leader first, reorganize! */ |
| rdp_old_leader = rdp_spawn->nocb_leader; |
| if (rdp_old_leader != rdp_spawn && !rdp_old_leader->nocb_kthread) { |
| rdp_last = NULL; |
| rdp = rdp_old_leader; |
| do { |
| rdp->nocb_leader = rdp_spawn; |
| if (rdp_last && rdp != rdp_spawn) |
| rdp_last->nocb_next_follower = rdp; |
| if (rdp == rdp_spawn) { |
| rdp = rdp->nocb_next_follower; |
| } else { |
| rdp_last = rdp; |
| rdp = rdp->nocb_next_follower; |
| rdp_last->nocb_next_follower = NULL; |
| } |
| } while (rdp); |
| rdp_spawn->nocb_next_follower = rdp_old_leader; |
| } |
| |
| /* Spawn the kthread for this CPU. */ |
| t = kthread_run(rcu_nocb_kthread, rdp_spawn, |
| "rcuo%c/%d", rcu_state.abbr, cpu); |
| if (WARN_ONCE(IS_ERR(t), "%s: Could not start rcuo kthread, OOM is now expected behavior\n", __func__)) |
| return; |
| WRITE_ONCE(rdp_spawn->nocb_kthread, t); |
| } |
| |
| /* |
| * If the specified CPU is a no-CBs CPU that does not already have its |
| * rcuo kthread, spawn it. |
| */ |
| static void rcu_spawn_cpu_nocb_kthread(int cpu) |
| { |
| if (rcu_scheduler_fully_active) |
| rcu_spawn_one_nocb_kthread(cpu); |
| } |
| |
| /* |
| * Once the scheduler is running, spawn rcuo kthreads for all online |
| * no-CBs CPUs. This assumes that the early_initcall()s happen before |
| * non-boot CPUs come online -- if this changes, we will need to add |
| * some mutual exclusion. |
| */ |
| static void __init rcu_spawn_nocb_kthreads(void) |
| { |
| int cpu; |
| |
| for_each_online_cpu(cpu) |
| rcu_spawn_cpu_nocb_kthread(cpu); |
| } |
| |
| /* How many follower CPU IDs per leader? Default of -1 for sqrt(nr_cpu_ids). */ |
| static int rcu_nocb_leader_stride = -1; |
| module_param(rcu_nocb_leader_stride, int, 0444); |
| |
| /* |
| * Initialize leader-follower relationships for all no-CBs CPU. |
| */ |
| static void __init rcu_organize_nocb_kthreads(void) |
| { |
| int cpu; |
| int ls = rcu_nocb_leader_stride; |
| int nl = 0; /* Next leader. */ |
| struct rcu_data *rdp; |
| struct rcu_data *rdp_leader = NULL; /* Suppress misguided gcc warn. */ |
| struct rcu_data *rdp_prev = NULL; |
| |
| if (!cpumask_available(rcu_nocb_mask)) |
| return; |
| if (ls == -1) { |
| ls = int_sqrt(nr_cpu_ids); |
| rcu_nocb_leader_stride = ls; |
| } |
| |
| /* |
| * Each pass through this loop sets up one rcu_data structure. |
| * Should the corresponding CPU come online in the future, then |
| * we will spawn the needed set of rcu_nocb_kthread() kthreads. |
| */ |
| for_each_cpu(cpu, rcu_nocb_mask) { |
| rdp = per_cpu_ptr(&rcu_data, cpu); |
| if (rdp->cpu >= nl) { |
| /* New leader, set up for followers & next leader. */ |
| nl = DIV_ROUND_UP(rdp->cpu + 1, ls) * ls; |
| rdp->nocb_leader = rdp; |
| rdp_leader = rdp; |
| } else { |
| /* Another follower, link to previous leader. */ |
| rdp->nocb_leader = rdp_leader; |
| rdp_prev->nocb_next_follower = rdp; |
| } |
| rdp_prev = rdp; |
| } |
| } |
| |
| /* Prevent __call_rcu() from enqueuing callbacks on no-CBs CPUs */ |
| static bool init_nocb_callback_list(struct rcu_data *rdp) |
| { |
| if (!rcu_is_nocb_cpu(rdp->cpu)) |
| return false; |
| |
| /* If there are early-boot callbacks, move them to nocb lists. */ |
| if (!rcu_segcblist_empty(&rdp->cblist)) { |
| rdp->nocb_head = rcu_segcblist_head(&rdp->cblist); |
| rdp->nocb_tail = rcu_segcblist_tail(&rdp->cblist); |
| atomic_long_set(&rdp->nocb_q_count, |
| rcu_segcblist_n_cbs(&rdp->cblist)); |
| atomic_long_set(&rdp->nocb_q_count_lazy, |
| rcu_segcblist_n_lazy_cbs(&rdp->cblist)); |
| rcu_segcblist_init(&rdp->cblist); |
| } |
| rcu_segcblist_disable(&rdp->cblist); |
| return true; |
| } |
| |
| /* |
| * Bind the current task to the offloaded CPUs. If there are no offloaded |
| * CPUs, leave the task unbound. Splat if the bind attempt fails. |
| */ |
| void rcu_bind_current_to_nocb(void) |
| { |
| if (cpumask_available(rcu_nocb_mask) && cpumask_weight(rcu_nocb_mask)) |
| WARN_ON(sched_setaffinity(current->pid, rcu_nocb_mask)); |
| } |
| EXPORT_SYMBOL_GPL(rcu_bind_current_to_nocb); |
| |
| /* |
| * Return the number of RCU callbacks still queued from the specified |
| * CPU, which must be a nocbs CPU. |
| */ |
| static unsigned long rcu_get_n_cbs_nocb_cpu(struct rcu_data *rdp) |
| { |
| return atomic_long_read(&rdp->nocb_q_count); |
| } |
| |
| #else /* #ifdef CONFIG_RCU_NOCB_CPU */ |
| |
| static bool rcu_nocb_cpu_needs_barrier(int cpu) |
| { |
| WARN_ON_ONCE(1); /* Should be dead code. */ |
| return false; |
| } |
| |
| static void rcu_nocb_gp_cleanup(struct swait_queue_head *sq) |
| { |
| } |
| |
| static struct swait_queue_head *rcu_nocb_gp_get(struct rcu_node *rnp) |
| { |
| return NULL; |
| } |
| |
| static void rcu_init_one_nocb(struct rcu_node *rnp) |
| { |
| } |
| |
| static bool __call_rcu_nocb(struct rcu_data *rdp, struct rcu_head *rhp, |
| bool lazy, unsigned long flags) |
| { |
| return false; |
| } |
| |
| static bool __maybe_unused rcu_nocb_adopt_orphan_cbs(struct rcu_data *my_rdp, |
| struct rcu_data *rdp, |
| unsigned long flags) |
| { |
| return false; |
| } |
| |
| static void __init rcu_boot_init_nocb_percpu_data(struct rcu_data *rdp) |
| { |
| } |
| |
| static int rcu_nocb_need_deferred_wakeup(struct rcu_data *rdp) |
| { |
| return false; |
| } |
| |
| static void do_nocb_deferred_wakeup(struct rcu_data *rdp) |
| { |
| } |
| |
| static void rcu_spawn_cpu_nocb_kthread(int cpu) |
| { |
| } |
| |
| static void __init rcu_spawn_nocb_kthreads(void) |
| { |
| } |
| |
| static bool init_nocb_callback_list(struct rcu_data *rdp) |
| { |
| return false; |
| } |
| |
| static unsigned long rcu_get_n_cbs_nocb_cpu(struct rcu_data *rdp) |
| { |
| return 0; |
| } |
| |
| #endif /* #else #ifdef CONFIG_RCU_NOCB_CPU */ |
| |
| /* |
| * Is this CPU a NO_HZ_FULL CPU that should ignore RCU so that the |
| * grace-period kthread will do force_quiescent_state() processing? |
| * The idea is to avoid waking up RCU core processing on such a |
| * CPU unless the grace period has extended for too long. |
| * |
| * This code relies on the fact that all NO_HZ_FULL CPUs are also |
| * CONFIG_RCU_NOCB_CPU CPUs. |
| */ |
| static bool rcu_nohz_full_cpu(void) |
| { |
| #ifdef CONFIG_NO_HZ_FULL |
| if (tick_nohz_full_cpu(smp_processor_id()) && |
| (!rcu_gp_in_progress() || |
| ULONG_CMP_LT(jiffies, READ_ONCE(rcu_state.gp_start) + HZ))) |
| return true; |
| #endif /* #ifdef CONFIG_NO_HZ_FULL */ |
| return false; |
| } |
| |
| /* |
| * Bind the RCU grace-period kthreads to the housekeeping CPU. |
| */ |
| static void rcu_bind_gp_kthread(void) |
| { |
| if (!tick_nohz_full_enabled()) |
| return; |
| housekeeping_affine(current, HK_FLAG_RCU); |
| } |
| |
| /* Record the current task on dyntick-idle entry. */ |
| static void rcu_dynticks_task_enter(void) |
| { |
| #if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL) |
| WRITE_ONCE(current->rcu_tasks_idle_cpu, smp_processor_id()); |
| #endif /* #if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL) */ |
| } |
| |
| /* Record no current task on dyntick-idle exit. */ |
| static void rcu_dynticks_task_exit(void) |
| { |
| #if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL) |
| WRITE_ONCE(current->rcu_tasks_idle_cpu, -1); |
| #endif /* #if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL) */ |
| } |