blob: fbeb931a026e883a4b78a75f9bc708216154a66f [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/dpu-sc7280.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display DPU dt properties for SC7280
maintainers:
- Krishna Manikandan <mkrishn@codeaurora.org>
description: |
Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
bindings of MDSS and DPU are mentioned for SC7280.
properties:
compatible:
const: qcom,sc7280-mdss
reg:
maxItems: 1
reg-names:
const: mdss
power-domains:
maxItems: 1
clocks:
items:
- description: Display AHB clock from gcc
- description: Display AHB clock from dispcc
- description: Display core clock
clock-names:
items:
- const: iface
- const: ahb
- const: core
interrupts:
maxItems: 1
interrupt-controller: true
"#address-cells": true
"#size-cells": true
"#interrupt-cells":
const: 1
iommus:
items:
- description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
ranges: true
interconnects:
items:
- description: Interconnect path specifying the port ids for data bus
interconnect-names:
const: mdp0-mem
patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
description: Node containing the properties of DPU.
properties:
compatible:
const: qcom,sc7280-dpu
reg:
items:
- description: Address offset and size for mdp register set
- description: Address offset and size for vbif register set
reg-names:
items:
- const: mdp
- const: vbif
clocks:
items:
- description: Display hf axi clock
- description: Display sf axi clock
- description: Display ahb clock
- description: Display lut clock
- description: Display core clock
- description: Display vsync clock
clock-names:
items:
- const: bus
- const: nrt_bus
- const: iface
- const: lut
- const: core
- const: vsync
interrupts:
maxItems: 1
power-domains:
maxItems: 1
operating-points-v2: true
ports:
$ref: /schemas/graph.yaml#/properties/ports
description: |
Contains the list of output ports from DPU device. These ports
connect to interfaces that are external to the DPU hardware,
such as DSI, DP etc. Each output port contains an endpoint that
describes how it is connected to an external interface.
properties:
port@0:
$ref: /schemas/graph.yaml#/properties/port
description: DPU_INTF1 (DSI)
port@1:
$ref: /schemas/graph.yaml#/properties/port
description: DPU_INTF5 (EDP)
required:
- port@0
required:
- compatible
- reg
- reg-names
- clocks
- interrupts
- power-domains
- operating-points-v2
- ports
required:
- compatible
- reg
- reg-names
- power-domains
- clocks
- interrupts
- interrupt-controller
- iommus
- ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,dispcc-sc7280.h>
#include <dt-bindings/clock/qcom,gcc-sc7280.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,sc7280.h>
#include <dt-bindings/power/qcom-rpmpd.h>
display-subsystem@ae00000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,sc7280-mdss";
reg = <0xae00000 0x1000>;
reg-names = "mdss";
power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
clocks = <&gcc GCC_DISP_AHB_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
clock-names = "iface",
"ahb",
"core";
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
interconnect-names = "mdp0-mem";
iommus = <&apps_smmu 0x900 0x402>;
ranges;
display-controller@ae01000 {
compatible = "qcom,sc7280-dpu";
reg = <0x0ae01000 0x8f000>,
<0x0aeb0000 0x2008>;
reg-names = "mdp", "vbif";
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
<&gcc GCC_DISP_SF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "bus",
"nrt_bus",
"iface",
"lut",
"core",
"vsync";
interrupt-parent = <&mdss>;
interrupts = <0>;
power-domains = <&rpmhpd SC7280_CX>;
operating-points-v2 = <&mdp_opp_table>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpu_intf1_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
port@1 {
reg = <1>;
dpu_intf5_out: endpoint {
remote-endpoint = <&edp_in>;
};
};
};
};
};
...