| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* ld script to make s390 Linux kernel |
| * Written by Martin Schwidefsky (schwidefsky@de.ibm.com) |
| */ |
| |
| #include <asm/thread_info.h> |
| #include <asm/page.h> |
| #include <asm/ftrace.lds.h> |
| |
| /* |
| * Put .bss..swapper_pg_dir as the first thing in .bss. This will |
| * make sure it has 16k alignment. |
| */ |
| #define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir) \ |
| *(.bss..invalid_pg_dir) |
| |
| /* Handle ro_after_init data on our own. */ |
| #define RO_AFTER_INIT_DATA |
| |
| #define EMITS_PT_NOTE |
| |
| #include <asm-generic/vmlinux.lds.h> |
| #include <asm/vmlinux.lds.h> |
| |
| OUTPUT_FORMAT("elf64-s390", "elf64-s390", "elf64-s390") |
| OUTPUT_ARCH(s390:64-bit) |
| ENTRY(startup_continue) |
| jiffies = jiffies_64; |
| |
| PHDRS { |
| text PT_LOAD FLAGS(5); /* R_E */ |
| data PT_LOAD FLAGS(7); /* RWE */ |
| note PT_NOTE FLAGS(0); /* ___ */ |
| } |
| |
| SECTIONS |
| { |
| . = 0x100000; |
| .text : { |
| _stext = .; /* Start of text section */ |
| _text = .; /* Text and read-only data */ |
| HEAD_TEXT |
| TEXT_TEXT |
| SCHED_TEXT |
| CPUIDLE_TEXT |
| LOCK_TEXT |
| KPROBES_TEXT |
| IRQENTRY_TEXT |
| SOFTIRQENTRY_TEXT |
| FTRACE_HOTPATCH_TRAMPOLINES_TEXT |
| *(.text.*_indirect_*) |
| *(.fixup) |
| *(.gnu.warning) |
| . = ALIGN(PAGE_SIZE); |
| _etext = .; /* End of text section */ |
| } :text = 0x0700 |
| |
| RO_DATA(PAGE_SIZE) |
| |
| . = ALIGN(PAGE_SIZE); |
| _sdata = .; /* Start of data section */ |
| |
| . = ALIGN(PAGE_SIZE); |
| __start_ro_after_init = .; |
| .data..ro_after_init : { |
| *(.data..ro_after_init) |
| JUMP_TABLE_DATA |
| } :data |
| EXCEPTION_TABLE(16) |
| . = ALIGN(PAGE_SIZE); |
| __end_ro_after_init = .; |
| |
| RW_DATA(0x100, PAGE_SIZE, THREAD_SIZE) |
| BOOT_DATA_PRESERVED |
| |
| . = ALIGN(8); |
| .amode31.refs : { |
| _start_amode31_refs = .; |
| *(.amode31.refs) |
| _end_amode31_refs = .; |
| } |
| |
| _edata = .; /* End of data section */ |
| |
| /* will be freed after init */ |
| . = ALIGN(PAGE_SIZE); /* Init code and data */ |
| __init_begin = .; |
| |
| . = ALIGN(PAGE_SIZE); |
| .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { |
| _sinittext = .; |
| INIT_TEXT |
| . = ALIGN(PAGE_SIZE); |
| _einittext = .; |
| } |
| |
| /* |
| * .exit.text is discarded at runtime, not link time, |
| * to deal with references from __bug_table |
| */ |
| .exit.text : { |
| EXIT_TEXT |
| } |
| |
| .exit.data : { |
| EXIT_DATA |
| } |
| |
| /* |
| * struct alt_inst entries. From the header (alternative.h): |
| * "Alternative instructions for different CPU types or capabilities" |
| * Think locking instructions on spinlocks. |
| * Note, that it is a part of __init region. |
| */ |
| . = ALIGN(8); |
| .altinstructions : { |
| __alt_instructions = .; |
| *(.altinstructions) |
| __alt_instructions_end = .; |
| } |
| |
| /* |
| * And here are the replacement instructions. The linker sticks |
| * them as binary blobs. The .altinstructions has enough data to |
| * get the address and the length of them to patch the kernel safely. |
| * Note, that it is a part of __init region. |
| */ |
| .altinstr_replacement : { |
| *(.altinstr_replacement) |
| } |
| |
| /* |
| * Table with the patch locations to undo expolines |
| */ |
| .nospec_call_table : { |
| __nospec_call_start = . ; |
| *(.s390_indirect*) |
| __nospec_call_end = . ; |
| } |
| .nospec_return_table : { |
| __nospec_return_start = . ; |
| *(.s390_return*) |
| __nospec_return_end = . ; |
| } |
| |
| BOOT_DATA |
| |
| /* |
| * .amode31 section for code, data, ex_table that need to stay |
| * below 2 GB, even when the kernel is relocated above 2 GB. |
| */ |
| . = ALIGN(PAGE_SIZE); |
| _samode31 = .; |
| .amode31.text : { |
| _stext_amode31 = .; |
| *(.amode31.text) |
| *(.amode31.text.*_indirect_*) |
| . = ALIGN(PAGE_SIZE); |
| _etext_amode31 = .; |
| } |
| . = ALIGN(16); |
| .amode31.ex_table : { |
| _start_amode31_ex_table = .; |
| KEEP(*(.amode31.ex_table)) |
| _stop_amode31_ex_table = .; |
| } |
| . = ALIGN(PAGE_SIZE); |
| .amode31.data : { |
| *(.amode31.data) |
| } |
| . = ALIGN(PAGE_SIZE); |
| _eamode31 = .; |
| |
| /* early.c uses stsi, which requires page aligned data. */ |
| . = ALIGN(PAGE_SIZE); |
| INIT_DATA_SECTION(0x100) |
| |
| PERCPU_SECTION(0x100) |
| |
| .dynsym ALIGN(8) : { |
| __dynsym_start = .; |
| *(.dynsym) |
| __dynsym_end = .; |
| } |
| .rela.dyn ALIGN(8) : { |
| __rela_dyn_start = .; |
| *(.rela*) |
| __rela_dyn_end = .; |
| } |
| |
| . = ALIGN(PAGE_SIZE); |
| __init_end = .; /* freed after init ends here */ |
| |
| BSS_SECTION(PAGE_SIZE, 4 * PAGE_SIZE, PAGE_SIZE) |
| |
| _end = . ; |
| |
| /* |
| * uncompressed image info used by the decompressor |
| * it should match struct vmlinux_info |
| */ |
| .vmlinux.info 0 (INFO) : { |
| QUAD(_stext) /* default_lma */ |
| QUAD(startup_continue) /* entry */ |
| QUAD(__bss_start - _stext) /* image_size */ |
| QUAD(__bss_stop - __bss_start) /* bss_size */ |
| QUAD(__boot_data_start) /* bootdata_off */ |
| QUAD(__boot_data_end - __boot_data_start) /* bootdata_size */ |
| QUAD(__boot_data_preserved_start) /* bootdata_preserved_off */ |
| QUAD(__boot_data_preserved_end - |
| __boot_data_preserved_start) /* bootdata_preserved_size */ |
| QUAD(__dynsym_start) /* dynsym_start */ |
| QUAD(__rela_dyn_start) /* rela_dyn_start */ |
| QUAD(__rela_dyn_end) /* rela_dyn_end */ |
| QUAD(_eamode31 - _samode31) /* amode31_size */ |
| } :NONE |
| |
| /* Debugging sections. */ |
| STABS_DEBUG |
| DWARF_DEBUG |
| ELF_DETAILS |
| |
| /* Sections to be discarded */ |
| DISCARDS |
| /DISCARD/ : { |
| *(.eh_frame) |
| } |
| } |