| /* |
| * PIKA FPGA based Watchdog Timer |
| * |
| * Copyright (c) 2008 PIKA Technologies |
| * Sean MacLennan <smaclennan@pikatech.com> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/fs.h> |
| #include <linux/miscdevice.h> |
| #include <linux/watchdog.h> |
| #include <linux/reboot.h> |
| #include <linux/jiffies.h> |
| #include <linux/timer.h> |
| #include <linux/bitops.h> |
| #include <linux/uaccess.h> |
| #include <linux/io.h> |
| #include <linux/of_address.h> |
| #include <linux/of_platform.h> |
| |
| #define DRV_NAME "PIKA-WDT" |
| |
| /* Hardware timeout in seconds */ |
| #define WDT_HW_TIMEOUT 2 |
| |
| /* Timer heartbeat (500ms) */ |
| #define WDT_TIMEOUT (HZ/2) |
| |
| /* User land timeout */ |
| #define WDT_HEARTBEAT 15 |
| static int heartbeat = WDT_HEARTBEAT; |
| module_param(heartbeat, int, 0); |
| MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. " |
| "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")"); |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " |
| "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| static struct { |
| void __iomem *fpga; |
| unsigned long next_heartbeat; /* the next_heartbeat for the timer */ |
| unsigned long open; |
| char expect_close; |
| int bootstatus; |
| struct timer_list timer; /* The timer that pings the watchdog */ |
| } pikawdt_private; |
| |
| static struct watchdog_info ident __ro_after_init = { |
| .identity = DRV_NAME, |
| .options = WDIOF_CARDRESET | |
| WDIOF_SETTIMEOUT | |
| WDIOF_KEEPALIVEPING | |
| WDIOF_MAGICCLOSE, |
| }; |
| |
| /* |
| * Reload the watchdog timer. (ie, pat the watchdog) |
| */ |
| static inline void pikawdt_reset(void) |
| { |
| /* -- FPGA: Reset Control Register (32bit R/W) (Offset: 0x14) -- |
| * Bit 7, WTCHDG_EN: When set to 1, the watchdog timer is enabled. |
| * Once enabled, it cannot be disabled. The watchdog can be |
| * kicked by performing any write access to the reset |
| * control register (this register). |
| * Bit 8-11, WTCHDG_TIMEOUT_SEC: Sets the watchdog timeout value in |
| * seconds. Valid ranges are 1 to 15 seconds. The value can |
| * be modified dynamically. |
| */ |
| unsigned reset = in_be32(pikawdt_private.fpga + 0x14); |
| /* enable with max timeout - 15 seconds */ |
| reset |= (1 << 7) + (WDT_HW_TIMEOUT << 8); |
| out_be32(pikawdt_private.fpga + 0x14, reset); |
| } |
| |
| /* |
| * Timer tick |
| */ |
| static void pikawdt_ping(struct timer_list *unused) |
| { |
| if (time_before(jiffies, pikawdt_private.next_heartbeat) || |
| (!nowayout && !pikawdt_private.open)) { |
| pikawdt_reset(); |
| mod_timer(&pikawdt_private.timer, jiffies + WDT_TIMEOUT); |
| } else |
| pr_crit("I will reset your machine !\n"); |
| } |
| |
| |
| static void pikawdt_keepalive(void) |
| { |
| pikawdt_private.next_heartbeat = jiffies + heartbeat * HZ; |
| } |
| |
| static void pikawdt_start(void) |
| { |
| pikawdt_keepalive(); |
| mod_timer(&pikawdt_private.timer, jiffies + WDT_TIMEOUT); |
| } |
| |
| /* |
| * Watchdog device is opened, and watchdog starts running. |
| */ |
| static int pikawdt_open(struct inode *inode, struct file *file) |
| { |
| /* /dev/watchdog can only be opened once */ |
| if (test_and_set_bit(0, &pikawdt_private.open)) |
| return -EBUSY; |
| |
| pikawdt_start(); |
| |
| return stream_open(inode, file); |
| } |
| |
| /* |
| * Close the watchdog device. |
| */ |
| static int pikawdt_release(struct inode *inode, struct file *file) |
| { |
| /* stop internal ping */ |
| if (!pikawdt_private.expect_close) |
| del_timer(&pikawdt_private.timer); |
| |
| clear_bit(0, &pikawdt_private.open); |
| pikawdt_private.expect_close = 0; |
| return 0; |
| } |
| |
| /* |
| * Pat the watchdog whenever device is written to. |
| */ |
| static ssize_t pikawdt_write(struct file *file, const char __user *data, |
| size_t len, loff_t *ppos) |
| { |
| if (!len) |
| return 0; |
| |
| /* Scan for magic character */ |
| if (!nowayout) { |
| size_t i; |
| |
| pikawdt_private.expect_close = 0; |
| |
| for (i = 0; i < len; i++) { |
| char c; |
| if (get_user(c, data + i)) |
| return -EFAULT; |
| if (c == 'V') { |
| pikawdt_private.expect_close = 42; |
| break; |
| } |
| } |
| } |
| |
| pikawdt_keepalive(); |
| |
| return len; |
| } |
| |
| /* |
| * Handle commands from user-space. |
| */ |
| static long pikawdt_ioctl(struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| int new_value; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; |
| |
| case WDIOC_GETSTATUS: |
| return put_user(0, p); |
| |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(pikawdt_private.bootstatus, p); |
| |
| case WDIOC_KEEPALIVE: |
| pikawdt_keepalive(); |
| return 0; |
| |
| case WDIOC_SETTIMEOUT: |
| if (get_user(new_value, p)) |
| return -EFAULT; |
| |
| heartbeat = new_value; |
| pikawdt_keepalive(); |
| |
| return put_user(new_value, p); /* return current value */ |
| |
| case WDIOC_GETTIMEOUT: |
| return put_user(heartbeat, p); |
| } |
| return -ENOTTY; |
| } |
| |
| |
| static const struct file_operations pikawdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .open = pikawdt_open, |
| .release = pikawdt_release, |
| .write = pikawdt_write, |
| .unlocked_ioctl = pikawdt_ioctl, |
| }; |
| |
| static struct miscdevice pikawdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &pikawdt_fops, |
| }; |
| |
| static int __init pikawdt_init(void) |
| { |
| struct device_node *np; |
| void __iomem *fpga; |
| u32 post1; |
| int ret; |
| |
| np = of_find_compatible_node(NULL, NULL, "pika,fpga"); |
| if (np == NULL) { |
| pr_err("Unable to find fpga\n"); |
| return -ENOENT; |
| } |
| |
| pikawdt_private.fpga = of_iomap(np, 0); |
| of_node_put(np); |
| if (pikawdt_private.fpga == NULL) { |
| pr_err("Unable to map fpga\n"); |
| return -ENOMEM; |
| } |
| |
| ident.firmware_version = in_be32(pikawdt_private.fpga + 0x1c) & 0xffff; |
| |
| /* POST information is in the sd area. */ |
| np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd"); |
| if (np == NULL) { |
| pr_err("Unable to find fpga-sd\n"); |
| ret = -ENOENT; |
| goto out; |
| } |
| |
| fpga = of_iomap(np, 0); |
| of_node_put(np); |
| if (fpga == NULL) { |
| pr_err("Unable to map fpga-sd\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* -- FPGA: POST Test Results Register 1 (32bit R/W) (Offset: 0x4040) -- |
| * Bit 31, WDOG: Set to 1 when the last reset was caused by a watchdog |
| * timeout. |
| */ |
| post1 = in_be32(fpga + 0x40); |
| if (post1 & 0x80000000) |
| pikawdt_private.bootstatus = WDIOF_CARDRESET; |
| |
| iounmap(fpga); |
| |
| timer_setup(&pikawdt_private.timer, pikawdt_ping, 0); |
| |
| ret = misc_register(&pikawdt_miscdev); |
| if (ret) { |
| pr_err("Unable to register miscdev\n"); |
| goto out; |
| } |
| |
| pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n", |
| heartbeat, nowayout); |
| return 0; |
| |
| out: |
| iounmap(pikawdt_private.fpga); |
| return ret; |
| } |
| |
| static void __exit pikawdt_exit(void) |
| { |
| misc_deregister(&pikawdt_miscdev); |
| |
| iounmap(pikawdt_private.fpga); |
| } |
| |
| module_init(pikawdt_init); |
| module_exit(pikawdt_exit); |
| |
| MODULE_AUTHOR("Sean MacLennan <smaclennan@pikatech.com>"); |
| MODULE_DESCRIPTION("PIKA FPGA based Watchdog Timer"); |
| MODULE_LICENSE("GPL"); |