| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Device Tree Include file for Marvell Armada 38x family of SoCs. |
| * |
| * Copyright (C) 2014 Marvell |
| * |
| * Lior Amsalem <alior@marvell.com> |
| * Gregory CLEMENT <gregory.clement@free-electrons.com> |
| * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| */ |
| |
| #include "skeleton.dtsi" |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) |
| |
| / { |
| model = "Marvell Armada 38x family SoC"; |
| compatible = "marvell,armada380"; |
| |
| aliases { |
| gpio0 = &gpio0; |
| gpio1 = &gpio1; |
| serial0 = &uart0; |
| serial1 = &uart1; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupts-extended = <&mpic 3>; |
| }; |
| |
| soc { |
| compatible = "marvell,armada380-mbus", "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| controller = <&mbusc>; |
| interrupt-parent = <&gic>; |
| pcie-mem-aperture = <0xe0000000 0x8000000>; |
| pcie-io-aperture = <0xe8000000 0x100000>; |
| |
| bootrom { |
| compatible = "marvell,bootrom"; |
| reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>; |
| }; |
| |
| devbus_bootcs: devbus-bootcs { |
| compatible = "marvell,mvebu-devbus"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; |
| ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| devbus_cs0: devbus-cs0 { |
| compatible = "marvell,mvebu-devbus"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; |
| ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| devbus_cs1: devbus-cs1 { |
| compatible = "marvell,mvebu-devbus"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; |
| ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| devbus_cs2: devbus-cs2 { |
| compatible = "marvell,mvebu-devbus"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; |
| ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| devbus_cs3: devbus-cs3 { |
| compatible = "marvell,mvebu-devbus"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; |
| ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| internal-regs { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; |
| |
| L2: cache-controller@8000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0x8000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| arm,double-linefill-incr = <0>; |
| arm,double-linefill-wrap = <0>; |
| arm,double-linefill = <0>; |
| prefetch-data = <1>; |
| }; |
| |
| scu@c000 { |
| compatible = "arm,cortex-a9-scu"; |
| reg = <0xc000 0x58>; |
| }; |
| |
| timer@c200 { |
| compatible = "arm,cortex-a9-global-timer"; |
| reg = <0xc200 0x20>; |
| interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; |
| clocks = <&coreclk 2>; |
| }; |
| |
| timer@c600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| reg = <0xc600 0x20>; |
| interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; |
| clocks = <&coreclk 2>; |
| }; |
| |
| gic: interrupt-controller@d000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #size-cells = <0>; |
| interrupt-controller; |
| reg = <0xd000 0x1000>, |
| <0xc100 0x100>; |
| }; |
| |
| i2c0: i2c@11000 { |
| compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c"; |
| reg = <0x11000 0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| timeout-ms = <1000>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@11100 { |
| compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c"; |
| reg = <0x11100 0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| timeout-ms = <1000>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@12000 { |
| compatible = "marvell,armada-38x-uart"; |
| reg = <0x12000 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@12100 { |
| compatible = "marvell,armada-38x-uart"; |
| reg = <0x12100 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| pinctrl: pinctrl@18000 { |
| reg = <0x18000 0x20>; |
| |
| ge0_rgmii_pins: ge-rgmii-pins-0 { |
| marvell,pins = "mpp6", "mpp7", "mpp8", |
| "mpp9", "mpp10", "mpp11", |
| "mpp12", "mpp13", "mpp14", |
| "mpp15", "mpp16", "mpp17"; |
| marvell,function = "ge0"; |
| }; |
| |
| ge1_rgmii_pins: ge-rgmii-pins-1 { |
| marvell,pins = "mpp21", "mpp27", "mpp28", |
| "mpp29", "mpp30", "mpp31", |
| "mpp32", "mpp37", "mpp38", |
| "mpp39", "mpp40", "mpp41"; |
| marvell,function = "ge1"; |
| }; |
| |
| i2c0_pins: i2c-pins-0 { |
| marvell,pins = "mpp2", "mpp3"; |
| marvell,function = "i2c0"; |
| }; |
| |
| mdio_pins: mdio-pins { |
| marvell,pins = "mpp4", "mpp5"; |
| marvell,function = "ge"; |
| }; |
| |
| ref_clk0_pins: ref-clk-pins-0 { |
| marvell,pins = "mpp45"; |
| marvell,function = "ref"; |
| }; |
| |
| ref_clk1_pins: ref-clk-pins-1 { |
| marvell,pins = "mpp46"; |
| marvell,function = "ref"; |
| }; |
| |
| spi0_pins: spi-pins-0 { |
| marvell,pins = "mpp22", "mpp23", "mpp24", |
| "mpp25"; |
| marvell,function = "spi0"; |
| }; |
| |
| spi1_pins: spi-pins-1 { |
| marvell,pins = "mpp56", "mpp57", "mpp58", |
| "mpp59"; |
| marvell,function = "spi1"; |
| }; |
| |
| nand_pins: nand-pins { |
| marvell,pins = "mpp22", "mpp34", "mpp23", |
| "mpp33", "mpp38", "mpp28", |
| "mpp40", "mpp42", "mpp35", |
| "mpp36", "mpp25", "mpp30", |
| "mpp32"; |
| marvell,function = "dev"; |
| }; |
| |
| nand_rb: nand-rb { |
| marvell,pins = "mpp41"; |
| marvell,function = "nand"; |
| }; |
| |
| uart0_pins: uart-pins-0 { |
| marvell,pins = "mpp0", "mpp1"; |
| marvell,function = "ua0"; |
| }; |
| |
| uart1_pins: uart-pins-1 { |
| marvell,pins = "mpp19", "mpp20"; |
| marvell,function = "ua1"; |
| }; |
| |
| sdhci_pins: sdhci-pins { |
| marvell,pins = "mpp48", "mpp49", "mpp50", |
| "mpp52", "mpp53", "mpp54", |
| "mpp55", "mpp57", "mpp58", |
| "mpp59"; |
| marvell,function = "sd0"; |
| }; |
| |
| sata0_pins: sata-pins-0 { |
| marvell,pins = "mpp20"; |
| marvell,function = "sata0"; |
| }; |
| |
| sata1_pins: sata-pins-1 { |
| marvell,pins = "mpp19"; |
| marvell,function = "sata1"; |
| }; |
| |
| sata2_pins: sata-pins-2 { |
| marvell,pins = "mpp47"; |
| marvell,function = "sata2"; |
| }; |
| |
| sata3_pins: sata-pins-3 { |
| marvell,pins = "mpp44"; |
| marvell,function = "sata3"; |
| }; |
| }; |
| |
| gpio0: gpio@18100 { |
| compatible = "marvell,armada-370-gpio", |
| "marvell,orion-gpio"; |
| reg = <0x18100 0x40>, <0x181c0 0x08>; |
| reg-names = "gpio", "pwm"; |
| ngpios = <32>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| #pwm-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&coreclk 0>; |
| }; |
| |
| gpio1: gpio@18140 { |
| compatible = "marvell,armada-370-gpio", |
| "marvell,orion-gpio"; |
| reg = <0x18140 0x40>, <0x181c8 0x08>; |
| reg-names = "gpio", "pwm"; |
| ngpios = <28>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| #pwm-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&coreclk 0>; |
| }; |
| |
| systemc: system-controller@18200 { |
| compatible = "marvell,armada-380-system-controller", |
| "marvell,armada-370-xp-system-controller"; |
| reg = <0x18200 0x100>; |
| }; |
| |
| gateclk: clock-gating-control@18220 { |
| compatible = "marvell,armada-380-gating-clock"; |
| reg = <0x18220 0x4>; |
| clocks = <&coreclk 0>; |
| #clock-cells = <1>; |
| }; |
| |
| coreclk: mvebu-sar@18600 { |
| compatible = "marvell,armada-380-core-clock"; |
| reg = <0x18600 0x04>; |
| #clock-cells = <1>; |
| }; |
| |
| mbusc: mbus-controller@20000 { |
| compatible = "marvell,mbus-controller"; |
| reg = <0x20000 0x100>, <0x20180 0x20>, |
| <0x20250 0x8>; |
| }; |
| |
| mpic: interrupt-controller@20a00 { |
| compatible = "marvell,mpic"; |
| reg = <0x20a00 0x2d0>, <0x21070 0x58>; |
| #interrupt-cells = <1>; |
| #size-cells = <1>; |
| interrupt-controller; |
| msi-controller; |
| interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| timer: timer@20300 { |
| compatible = "marvell,armada-380-timer", |
| "marvell,armada-xp-timer"; |
| reg = <0x20300 0x30>, <0x21040 0x30>; |
| interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <&mpic 5>, |
| <&mpic 6>; |
| clocks = <&coreclk 2>, <&refclk>; |
| clock-names = "nbclk", "fixed"; |
| }; |
| |
| watchdog: watchdog@20300 { |
| compatible = "marvell,armada-380-wdt"; |
| reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>; |
| clocks = <&coreclk 2>, <&refclk>; |
| clock-names = "nbclk", "fixed"; |
| }; |
| |
| cpurst: cpurst@20800 { |
| compatible = "marvell,armada-370-cpu-reset"; |
| reg = <0x20800 0x10>; |
| }; |
| |
| mpcore-soc-ctrl@20d20 { |
| compatible = "marvell,armada-380-mpcore-soc-ctrl"; |
| reg = <0x20d20 0x6c>; |
| }; |
| |
| coherencyfab: coherency-fabric@21010 { |
| compatible = "marvell,armada-380-coherency-fabric"; |
| reg = <0x21010 0x1c>; |
| }; |
| |
| pmsu: pmsu@22000 { |
| compatible = "marvell,armada-380-pmsu"; |
| reg = <0x22000 0x1000>; |
| }; |
| |
| /* |
| * As a special exception to the "order by |
| * register address" rule, the eth0 node is |
| * placed here to ensure that it gets |
| * registered as the first interface, since |
| * the network subsystem doesn't allow naming |
| * interfaces using DT aliases. Without this, |
| * the ordering of interfaces is different |
| * from the one used in U-Boot and the |
| * labeling of interfaces on the boards, which |
| * is very confusing for users. |
| */ |
| eth0: ethernet@70000 { |
| compatible = "marvell,armada-370-neta"; |
| reg = <0x70000 0x4000>; |
| interrupts-extended = <&mpic 8>; |
| clocks = <&gateclk 4>; |
| tx-csum-limit = <9800>; |
| status = "disabled"; |
| }; |
| |
| eth1: ethernet@30000 { |
| compatible = "marvell,armada-370-neta"; |
| reg = <0x30000 0x4000>; |
| interrupts-extended = <&mpic 10>; |
| clocks = <&gateclk 3>; |
| status = "disabled"; |
| }; |
| |
| eth2: ethernet@34000 { |
| compatible = "marvell,armada-370-neta"; |
| reg = <0x34000 0x4000>; |
| interrupts-extended = <&mpic 12>; |
| clocks = <&gateclk 2>; |
| status = "disabled"; |
| }; |
| |
| usb0: usb@58000 { |
| compatible = "marvell,orion-ehci"; |
| reg = <0x58000 0x500>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gateclk 18>; |
| status = "disabled"; |
| }; |
| |
| xor0: xor@60800 { |
| compatible = "marvell,armada-380-xor", "marvell,orion-xor"; |
| reg = <0x60800 0x100 |
| 0x60a00 0x100>; |
| clocks = <&gateclk 22>; |
| status = "okay"; |
| |
| xor00 { |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| dmacap,memcpy; |
| dmacap,xor; |
| }; |
| xor01 { |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| dmacap,memcpy; |
| dmacap,xor; |
| dmacap,memset; |
| }; |
| }; |
| |
| xor1: xor@60900 { |
| compatible = "marvell,armada-380-xor", "marvell,orion-xor"; |
| reg = <0x60900 0x100 |
| 0x60b00 0x100>; |
| clocks = <&gateclk 28>; |
| status = "okay"; |
| |
| xor10 { |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| dmacap,memcpy; |
| dmacap,xor; |
| }; |
| xor11 { |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| dmacap,memcpy; |
| dmacap,xor; |
| dmacap,memset; |
| }; |
| }; |
| |
| mdio: mdio@72004 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "marvell,orion-mdio"; |
| reg = <0x72004 0x4>; |
| clocks = <&gateclk 4>; |
| }; |
| |
| cesa: crypto@90000 { |
| compatible = "marvell,armada-38x-crypto"; |
| reg = <0x90000 0x10000>; |
| reg-names = "regs"; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gateclk 23>, <&gateclk 21>, |
| <&gateclk 14>, <&gateclk 16>; |
| clock-names = "cesa0", "cesa1", |
| "cesaz0", "cesaz1"; |
| marvell,crypto-srams = <&crypto_sram0>, |
| <&crypto_sram1>; |
| marvell,crypto-sram-size = <0x800>; |
| }; |
| |
| rtc: rtc@a3800 { |
| compatible = "marvell,armada-380-rtc"; |
| reg = <0xa3800 0x20>, <0x184a0 0x0c>; |
| reg-names = "rtc", "rtc-soc"; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| ahci0: sata@a8000 { |
| compatible = "marvell,armada-380-ahci"; |
| reg = <0xa8000 0x2000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gateclk 15>; |
| status = "disabled"; |
| }; |
| |
| bm: bm@c8000 { |
| compatible = "marvell,armada-380-neta-bm"; |
| reg = <0xc8000 0xac>; |
| clocks = <&gateclk 13>; |
| internal-mem = <&bm_bppi>; |
| status = "disabled"; |
| }; |
| |
| ahci1: sata@e0000 { |
| compatible = "marvell,armada-380-ahci"; |
| reg = <0xe0000 0x2000>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gateclk 30>; |
| status = "disabled"; |
| }; |
| |
| coredivclk: clock@e4250 { |
| compatible = "marvell,armada-380-corediv-clock"; |
| reg = <0xe4250 0xc>; |
| #clock-cells = <1>; |
| clocks = <&mainpll>; |
| clock-output-names = "nand"; |
| }; |
| |
| thermal: thermal@e8078 { |
| compatible = "marvell,armada380-thermal"; |
| reg = <0xe4078 0x4>, <0xe4074 0x4>; |
| status = "okay"; |
| }; |
| |
| nand_controller: nand-controller@d0000 { |
| compatible = "marvell,armada370-nand-controller"; |
| reg = <0xd0000 0x54>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&coredivclk 0>; |
| status = "disabled"; |
| }; |
| |
| sdhci: sdhci@d8000 { |
| compatible = "marvell,armada-380-sdhci"; |
| reg-names = "sdhci", "mbus", "conf-sdio3"; |
| reg = <0xd8000 0x1000>, |
| <0xdc000 0x100>, |
| <0x18454 0x4>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gateclk 17>; |
| mrvl,clk-delay-cycles = <0x1F>; |
| status = "disabled"; |
| }; |
| |
| usb3_0: usb3@f0000 { |
| compatible = "marvell,armada-380-xhci"; |
| reg = <0xf0000 0x4000>,<0xf4000 0x4000>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gateclk 9>; |
| status = "disabled"; |
| }; |
| |
| usb3_1: usb3@f8000 { |
| compatible = "marvell,armada-380-xhci"; |
| reg = <0xf8000 0x4000>,<0xfc000 0x4000>; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gateclk 10>; |
| status = "disabled"; |
| }; |
| }; |
| |
| crypto_sram0: sa-sram0 { |
| compatible = "mmio-sram"; |
| reg = <MBUS_ID(0x09, 0x19) 0 0x800>; |
| clocks = <&gateclk 23>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>; |
| }; |
| |
| crypto_sram1: sa-sram1 { |
| compatible = "mmio-sram"; |
| reg = <MBUS_ID(0x09, 0x15) 0 0x800>; |
| clocks = <&gateclk 21>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; |
| }; |
| |
| bm_bppi: bm-bppi { |
| compatible = "mmio-sram"; |
| reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; |
| ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&gateclk 13>; |
| no-memory-wc; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@10600 { |
| compatible = "marvell,armada-380-spi", |
| "marvell,orion-spi"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@10680 { |
| compatible = "marvell,armada-380-spi", |
| "marvell,orion-spi"; |
| reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&coreclk 0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| clocks { |
| /* 1 GHz fixed main PLL */ |
| mainpll: mainpll { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <1000000000>; |
| }; |
| |
| /* 25 MHz reference crystal */ |
| refclk: oscillator { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <25000000>; |
| }; |
| }; |
| }; |
